diff options
Diffstat (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h')
-rw-r--r-- | target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h deleted file mode 100644 index 678e224..0000000 --- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h +++ /dev/null @@ -1,191 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDram -#define __INCmvDram - -#include "ddr1_2/mvDramIf.h" -#include "twsi/mvTwsi.h" - -#define MAX_DIMM_NUM 2 -#define SPD_SIZE 128 - -/* Dimm spd offsets */ -#define DIMM_MEM_TYPE 2 -#define DIMM_ROW_NUM 3 -#define DIMM_COL_NUM 4 -#define DIMM_MODULE_BANK_NUM 5 -#define DIMM_DATA_WIDTH 6 -#define DIMM_VOLT_IF 8 -#define DIMM_MIN_CC_AT_MAX_CAS 9 -#define DIMM_ERR_CHECK_TYPE 11 -#define DIMM_REFRESH_INTERVAL 12 -#define DIMM_SDRAM_WIDTH 13 -#define DIMM_ERR_CHECK_DATA_WIDTH 14 -#define DIMM_MIN_CLK_DEL 15 -#define DIMM_BURST_LEN_SUP 16 -#define DIMM_DEV_BANK_NUM 17 -#define DIMM_SUP_CAL 18 -#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ -#define DIMM_BUF_ADDR_CONT_IN 21 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 -#define DIMM_MIN_ROW_PRECHARGE_TIME 27 -#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 -#define DIMM_MIN_RAS_TO_CAS_DELAY 29 -#define DIMM_MIN_RAS_PULSE_WIDTH 30 -#define DIMM_BANK_DENSITY 31 -#define DIMM_MIN_WRITE_RECOVERY_TIME 36 -#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 -#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 -#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 - -/* Dimm Memory Type values */ -#define DIMM_MEM_TYPE_SDRAM 0x4 -#define DIMM_MEM_TYPE_DDR1 0x7 -#define DIMM_MEM_TYPE_DDR2 0x8 - -#define DIMM_MODULE_MANU_OFFS 64 -#define DIMM_MODULE_MANU_SIZE 8 -#define DIMM_MODULE_VEN_OFFS 73 -#define DIMM_MODULE_VEN_SIZE 25 -#define DIMM_MODULE_ID_OFFS 99 -#define DIMM_MODULE_ID_SIZE 18 - -/* enumeration for voltage levels. */ -typedef enum _mvDimmVoltageIf -{ - TTL_5V_TOLERANT, - LVTTL, - HSTL_1_5V, - SSTL_3_3V, - SSTL_2_5V, - VOLTAGE_UNKNOWN, -} MV_DIMM_VOLTAGE_IF; - - -/* enumaration for SDRAM CAS Latencies. */ -typedef enum _mvDimmSdramCas -{ - SD_CL_1 =1, - SD_CL_2, - SD_CL_3, - SD_CL_4, - SD_CL_5, - SD_CL_6, - SD_CL_7, - SD_FAULT -}MV_DIMM_SDRAM_CAS; - - -/* DIMM information structure */ -typedef struct _mvDimmInfo -{ - MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ - - MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ - - /* DIMM dimensions */ - MV_U32 numOfRowAddr; - MV_U32 numOfColAddr; - MV_U32 numOfModuleBanks; - MV_U32 dataWidth; - MV_U32 errorCheckType; /* ECC , PARITY..*/ - MV_U32 sdramWidth; /* 4,8,16 or 32 */ - MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ - MV_U32 burstLengthSupported; - MV_U32 numOfBanksOnEachDevice; - MV_U32 suportedCasLatencies; - MV_U32 refreshInterval; - MV_U32 dimmBankDensity; - MV_U32 dimmTypeInfo; /* DDR2 only */ - MV_U32 dimmAttributes; - - /* DIMM timing parameters */ - MV_U32 minCycleTimeAtMaxCasLatPs; - MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; - MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; - MV_U32 minRowPrechargeTime; - MV_U32 minRowActiveToRowActive; - MV_U32 minRasToCasDelay; - MV_U32 minRasPulseWidth; - MV_U32 minWriteRecoveryTime; /* DDR2 only */ - MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ - MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ - MV_U32 minRefreshToActiveCmd; /* DDR2 only */ - - /* Parameters calculated from the extracted DIMM information */ - MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ - MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ - MV_U32 numberOfDevices; - -} MV_DIMM_INFO; - - -MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); -MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); -MV_VOID dimmSpdPrint(MV_U32 dimmNum); -MV_STATUS dimmSpdCpy(MV_VOID); - -#endif /* __INCmvDram */ |