diff options
Diffstat (limited to 'target/linux/generic/patches-3.2/020-ssb_update.patch')
| -rw-r--r-- | target/linux/generic/patches-3.2/020-ssb_update.patch | 502 |
1 files changed, 440 insertions, 62 deletions
diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch index 1fe1768..1b38e38 100644 --- a/target/linux/generic/patches-3.2/020-ssb_update.patch +++ b/target/linux/generic/patches-3.2/020-ssb_update.patch @@ -1,6 +1,222 @@ +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -13,6 +13,9 @@ + #include <linux/ssb/ssb_driver_chipcommon.h> + #include <linux/delay.h> + #include <linux/export.h> ++#ifdef CONFIG_BCM47XX ++#include <asm/mach-bcm47xx/nvram.h> ++#endif + + #include "ssb_private.h" + +@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -15,10 +231,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -73,10 +304,74 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -86,13 +381,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -82,6 +88,8 @@ struct ssb_sprom { +@@ -26,9 +32,12 @@ struct ssb_sprom { + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ + u8 country_code; /* Country Code */ +- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ +- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; +@@ -47,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -61,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -82,19 +91,97 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -101,22 +437,111 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -94,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ - } antenna_gain; - + struct { ++ s8 a0, a1, a2, a3; ++ } antenna_gain; ++ + struct { -+ struct { + struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz2; -+ struct { + struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ +- } antenna_gain; + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; + +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; + /* Information about the PCB the circuitry is soldered on. */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include <linux/ssb/ssb.h> ++#include <linux/bug.h> + #include <linux/pci.h> + #include <linux/spinlock.h> + --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -432,6 +432,56 @@ @@ -184,50 +609,3 @@ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ -@@ -464,6 +515,46 @@ - - /* Values for boardflags_lo read from SPROM */ - #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ -+#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ -+#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ -+#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ -+#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ -+#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ -+#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ -+#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ -+#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ -+#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ -+#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ -+#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ -+#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ -+#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ -+#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ -+#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ -+ -+/* Values for boardflags_hi read from SPROM */ -+#define SSB_BFH_NOPA 0x0001 /* has no PA */ -+#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ -+#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ -+#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ -+#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ -+#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ -+#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ -+ -+/* Values for boardflags2_lo read from SPROM */ -+#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ -+#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ -+#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ -+#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ -+#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ -+#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ -+#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ -+#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ -+#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ -+#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ -+#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ -+ -+/* Values for boardflags_lo read from SPROM */ -+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ - #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ - #define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ - #define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ |