summaryrefslogtreecommitdiff
path: root/target/linux/generic/patches-3.7/020-ssb_update.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic/patches-3.7/020-ssb_update.patch')
-rw-r--r--target/linux/generic/patches-3.7/020-ssb_update.patch1481
1 files changed, 1389 insertions, 92 deletions
diff --git a/target/linux/generic/patches-3.7/020-ssb_update.patch b/target/linux/generic/patches-3.7/020-ssb_update.patch
index d44c812..54ea356 100644
--- a/target/linux/generic/patches-3.7/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.7/020-ssb_update.patch
@@ -30,7 +30,7 @@
ARRAY_SIZE(wgt634u_devices));
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
@@ -42,6 +42,11 @@
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
If unsure, say N
@@ -98,7 +103,7 @@
#include "ssb_private.h"
-@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru
+@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
cc->fast_pwrup_delay = tmp;
}
@@ -174,7 +179,11 @@
+
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
@@ -333,16 +342,62 @@
/* Turn off UART clock before switching clocksource. */
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -346,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -346,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
}
break;
+ case 43222:
+ break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PLL init unknown for device %04X\n",
-@@ -434,6 +436,7 @@ static void ssb_pmu_resources_init(struc
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -434,6 +435,7 @@ static void ssb_pmu_resources_init(struc
min_msk = 0xCBB;
break;
case 0x4322:
@@ -350,7 +405,30 @@
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
-@@ -615,6 +618,33 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -469,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -523,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -615,6 +616,32 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
@@ -374,9 +452,8 @@
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU alp clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
@@ -384,7 +461,27 @@
u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
-@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+@@ -624,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU cpu clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -639,9 +665,52 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ case 0x5354:
+ return 120000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU controlclock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
return 0;
}
}
@@ -405,8 +502,23 @@
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
-+ /* TODO: BCM43222 requires updating PLLs too */
-+ return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
@@ -419,7 +531,7 @@
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,166 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
@@ -431,9 +543,157 @@
+
+#include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
++struct ssb_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ int i;
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
++ SSB_CHIPCO_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ pr_err("SFLASH control command failed (timeout)!\n");
++}
++
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = ssb_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = ssb_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
++ id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++
++ for (e = ssb_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
++ id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ pr_err("Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
++ e->name, e->blocksize, e->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
@@ -537,7 +797,7 @@
}
--- /dev/null
+++ b/drivers/ssb/driver_gpio.c
-@@ -0,0 +1,176 @@
+@@ -0,0 +1,210 @@
+/*
+ * Sonics Silicon Backplane
+ * GPIO driver
@@ -614,6 +874,16 @@
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
+}
+
++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->chipco.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_chipco_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
@@ -626,6 +896,7 @@
+ chip->set = ssb_gpio_chipco_set_value;
+ chip->direction_input = ssb_gpio_chipco_direction_input;
+ chip->direction_output = ssb_gpio_chipco_direction_output;
++ chip->to_irq = ssb_gpio_chipco_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
@@ -674,6 +945,16 @@
+ return 0;
+}
+
++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->extif.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
@@ -684,6 +965,7 @@
+ chip->set = ssb_gpio_extif_set_value;
+ chip->direction_input = ssb_gpio_extif_direction_input;
+ chip->direction_output = ssb_gpio_extif_direction_output;
++ chip->to_irq = ssb_gpio_extif_to_irq;
+ chip->ngpio = 5;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
@@ -714,9 +996,88 @@
+
+ return -1;
+}
++
++int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco) ||
++ ssb_extif_available(&bus->extif)) {
++ return gpiochip_remove(&bus->gpio);
++ } else {
++ SSB_WARN_ON(1);
++ }
++
++ return -1;
++}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -10,6 +10,7 @@
+
+ #include <linux/ssb/ssb.h>
+
++#include <linux/mtd/physmap.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+@@ -17,6 +18,25 @@
+
+ #include "ssb_private.h"
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data ssb_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource ssb_pflash_resource = {
++ .name = "ssb_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device ssb_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &ssb_pflash_data,
++ },
++ .resource = &ssb_pflash_resource,
++ .num_resources = 1,
++};
+
+ static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
@@ -728,23 +1089,27 @@
mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
else
mcore->nr_serial_ports = 0;
-@@ -191,10 +191,11 @@ static void ssb_mips_flash_detect(struct
+@@ -189,32 +210,43 @@ static void ssb_mips_serial_init(struct
+ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
+ {
struct ssb_bus *bus = mcore->dev->bus;
++ struct ssb_pflash *pflash = &mcore->pflash;
/* When there is no chipcommon on the bus there is 4MB flash */
- if (!bus->chipco.dev) {
- mcore->flash_buswidth = 2;
- mcore->flash_window = SSB_FLASH1;
- mcore->flash_window_size = SSB_FLASH1_SZ;
+- return;
+ if (!ssb_chipco_available(&bus->chipco)) {
-+ mcore->pflash.present = true;
-+ mcore->pflash.buswidth = 2;
-+ mcore->pflash.window = SSB_FLASH1;
-+ mcore->pflash.window_size = SSB_FLASH1_SZ;
- return;
++ pflash->present = true;
++ pflash->buswidth = 2;
++ pflash->window = SSB_FLASH1;
++ pflash->window_size = SSB_FLASH1_SZ;
++ goto ssb_pflash;
}
-@@ -202,17 +203,19 @@ static void ssb_mips_flash_detect(struct
+ /* There is ChipCommon, so use it to read info about flash */
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
@@ -756,20 +1121,29 @@
pr_debug("Found parallel flash\n");
- mcore->flash_window = SSB_FLASH2;
- mcore->flash_window_size = SSB_FLASH2_SZ;
-+ mcore->pflash.present = true;
-+ mcore->pflash.window = SSB_FLASH2;
-+ mcore->pflash.window_size = SSB_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = SSB_FLASH2;
++ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->flash_buswidth = 1;
-+ mcore->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- mcore->flash_buswidth = 2;
-+ mcore->pflash.buswidth = 2;
++ pflash->buswidth = 2;
break;
}
++
++ssb_pflash:
++ if (pflash->present) {
++ ssb_pflash_data.width = pflash->buswidth;
++ ssb_pflash_resource.start = pflash->window;
++ ssb_pflash_resource.end = pflash->window + pflash->window_size;
++ }
}
-@@ -225,9 +228,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+
+ u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+@@ -225,9 +257,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
return ssb_pmu_get_cpu_clock(&bus->chipco);
@@ -781,7 +1155,16 @@
ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
} else
return 0;
-@@ -263,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -255,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -263,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
hz = 100000000;
ns = 1000000000 / hz;
@@ -793,6 +1176,71 @@
ssb_chipco_timing_init(&bus->chipco, ns);
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -303,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -4,11 +4,13 @@
@@ -809,7 +1257,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
-@@ -32,6 +34,39 @@ int ssb_watchdog_timer_set(struct ssb_bu
+@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
@@ -836,9 +1284,8 @@
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
-+ ssb_dprintk(KERN_INFO PFX
-+ "can not register watchdog device, err: %li\n",
-+ PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
@@ -859,7 +1306,18 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
-@@ -433,6 +434,11 @@ static void ssb_devices_unregister(struc
+@@ -274,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+@@ -433,10 +434,23 @@ static void ssb_devices_unregister(struc
if (sdev->dev)
device_unregister(sdev->dev);
}
@@ -871,7 +1329,63 @@
}
void ssb_bus_unregister(struct ssb_bus *bus)
-@@ -561,6 +567,8 @@ static int __devinit ssb_attach_queued_b
+ {
++ int err;
++
++ err = ssb_gpio_unregister(bus);
++ if (err == -EBUSY)
++ ssb_dbg("Some GPIOs are still in use\n");
++ else if (err)
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
++
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+@@ -482,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -522,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -534,6 +545,22 @@ static int ssb_devices_register(struct s
+ dev_idx++;
+ }
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ if (bus->mipscore.pflash.present) {
++ err = platform_device_register(&ssb_pflash_dev);
++ if (err)
++ pr_err("Error registering parallel flash\n");
++ }
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+@@ -561,6 +588,8 @@ static int __devinit ssb_attach_queued_b
if (err)
goto error;
ssb_pcicore_init(&bus->pcicore);
@@ -880,7 +1394,7 @@
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
-@@ -796,7 +804,14 @@ static int __devinit ssb_bus_register(st
+@@ -796,7 +825,13 @@ static int __devinit ssb_bus_register(st
if (err)
goto err_pcmcia_exit;
ssb_chipcommon_init(&bus->chipco);
@@ -888,14 +1402,62 @@
ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
-+ ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
-+ ssb_dprintk(KERN_ERR PFX
-+ "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -1118,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -847,11 +882,11 @@ int __devinit ssb_bus_pcibus_register(st
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -872,8 +907,8 @@ int __devinit ssb_bus_pcmciabus_register
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -895,8 +930,8 @@ int __devinit ssb_bus_sdiobus_register(s
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -915,8 +950,8 @@ int __devinit ssb_bus_ssbbus_register(st
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1118,8 +1153,7 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
default:
@@ -905,9 +1467,589 @@
}
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
+@@ -1311,7 +1345,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1334,7 +1368,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1442,15 +1476,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 4) {
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
+- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+- bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -3,6 +3,7 @@
+@@ -3,21 +3,33 @@
#include <linux/ssb/ssb.h>
#include <linux/types.h>
@@ -915,7 +2057,37 @@
#define PFX "ssb: "
-@@ -210,5 +211,63 @@ static inline void b43_pci_ssb_bridge_ex
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -210,5 +222,76 @@ static inline void b43_pci_ssb_bridge_ex
/* driver_chipcommon_pmu.c */
extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
@@ -936,6 +2108,14 @@
+}
+#endif /* CONFIG_SSB_SFLASH */
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
@@ -971,11 +2151,16 @@
+
+#ifdef CONFIG_SSB_DRIVER_GPIO
+extern int ssb_gpio_init(struct ssb_bus *bus);
++extern int ssb_gpio_unregister(struct ssb_bus *bus);
+#else /* CONFIG_SSB_DRIVER_GPIO */
+static inline int ssb_gpio_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
++static inline int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ return 0;
++}
+#endif /* CONFIG_SSB_DRIVER_GPIO */
#endif /* LINUX_SSB_PRIVATE_H_ */
@@ -992,7 +2177,85 @@
#include <linux/ssb/ssb_regs.h>
-@@ -432,7 +434,11 @@ struct ssb_bus {
+@@ -24,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+
+ struct ssb_sprom {
+ u8 revision;
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+@@ -338,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+@@ -432,7 +482,11 @@ struct ssb_bus {
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
spinlock_t gpio_lock;
@@ -1135,9 +2398,51 @@
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -13,6 +13,12 @@ struct ssb_serial_port {
+@@ -13,6 +13,24 @@ struct ssb_serial_port {
unsigned int reg_shift;
};
@@ -1147,10 +2452,22 @@
+ u32 window;
+ u32 window_size;
+};
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
struct ssb_mipscore {
struct ssb_device *dev;
-@@ -20,9 +26,7 @@ struct ssb_mipscore {
+@@ -20,9 +38,10 @@ struct ssb_mipscore {
int nr_serial_ports;
struct ssb_serial_port serial_ports[4];
@@ -1158,12 +2475,35 @@
- u32 flash_window;
- u32 flash_window_size;
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -289,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
@@ -1180,7 +2520,7 @@
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
-@@ -485,7 +485,7 @@
+@@ -485,7 +486,7 @@
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
@@ -1223,46 +2563,3 @@
break;
#endif
}
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
- return (s8)gain;
- }
-
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+ SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-- if (out->revision >= 2)
-- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
-+ if (out->revision >= 2)
-+ sprom_extract_r23(out, in);
- }
-
- /* Revs 4 5 and 8 have partially shared layout */