diff options
Diffstat (limited to 'target/linux/generic/patches-3.8/025-bcma_backport.patch')
| -rw-r--r-- | target/linux/generic/patches-3.8/025-bcma_backport.patch | 1988 |
1 files changed, 0 insertions, 1988 deletions
diff --git a/target/linux/generic/patches-3.8/025-bcma_backport.patch b/target/linux/generic/patches-3.8/025-bcma_backport.patch deleted file mode 100644 index 21cffb1..0000000 --- a/target/linux/generic/patches-3.8/025-bcma_backport.patch +++ /dev/null @@ -1,1988 +0,0 @@ ---- a/arch/mips/bcm47xx/serial.c -+++ b/arch/mips/bcm47xx/serial.c -@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi - - p->mapbase = (unsigned int) bcma_port->regs; - p->membase = (void *) bcma_port->regs; -- p->irq = bcma_port->irq + 2; -+ p->irq = bcma_port->irq; - p->uartclk = bcma_port->baud_base; - p->regshift = bcma_port->reg_shift; - p->iotype = UPIO_MEM; ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE - config BCMA_HOST_PCI - bool "Support for BCMA on PCI-host bus" - depends on BCMA_HOST_PCI_POSSIBLE -+ default y - - config BCMA_DRIVER_PCI_HOSTMODE - bool "Driver for PCI core working in hostmode" -@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE - PCI core hostmode operation (external PCI bus). - - config BCMA_HOST_SOC -- bool -- depends on BCMA_DRIVER_MIPS -+ bool "Support for BCMA in a SoC" -+ depends on BCMA -+ help -+ Host interface for a Broadcom AIX bus directly mapped into -+ the memory. This only works with the Broadcom SoCs from the -+ BCM47XX line. -+ -+ If unsure, say N - - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -22,6 +22,8 @@ - struct bcma_bus; - - /* main.c */ -+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, -+ int timeout); - int bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); - int __init bcma_bus_early_register(struct bcma_bus *bus, -@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc - int bcma_bus_suspend(struct bcma_bus *bus); - int bcma_bus_resume(struct bcma_bus *bus); - #endif -+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, -+ u8 unit); - - /* scan.c */ - int bcma_bus_scan(struct bcma_bus *bus); -@@ -45,6 +49,7 @@ int bcma_sprom_get(struct bcma_bus *bus) - /* driver_chipcommon.c */ - #ifdef CONFIG_BCMA_DRIVER_MIPS - void bcma_chipco_serial_init(struct bcma_drv_cc *cc); -+extern struct platform_device bcma_pflash_dev; - #endif /* CONFIG_BCMA_DRIVER_MIPS */ - - /* driver_chipcommon_pmu.c */ ---- a/drivers/bcma/core.c -+++ b/drivers/bcma/core.c -@@ -9,6 +9,25 @@ - #include <linux/export.h> - #include <linux/bcma/bcma.h> - -+static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask, -+ u32 value, int timeout) -+{ -+ unsigned long deadline = jiffies + timeout; -+ u32 val; -+ -+ do { -+ val = bcma_aread32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ cpu_relax(); -+ udelay(10); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); -+ -+ return false; -+} -+ - bool bcma_core_is_enabled(struct bcma_device *core) - { - if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) -@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic - if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) - return; - -- bcma_awrite32(core, BCMA_IOCTL, flags); -- bcma_aread32(core, BCMA_IOCTL); -- udelay(10); -+ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300); - - bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); - bcma_aread32(core, BCMA_RESET_CTL); - udelay(1); -+ -+ bcma_awrite32(core, BCMA_IOCTL, flags); -+ bcma_aread32(core, BCMA_IOCTL); -+ udelay(10); - } - EXPORT_SYMBOL_GPL(bcma_core_disable); - -@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device - bcma_aread32(core, BCMA_IOCTL); - - bcma_awrite32(core, BCMA_RESET_CTL, 0); -+ bcma_aread32(core, BCMA_RESET_CTL); - udelay(1); - - bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); -@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic - if (i) - bcma_err(core->bus, "PLL enable timeout\n"); - } else { -- bcma_warn(core->bus, "Disabling PLL not supported yet!\n"); -+ /* -+ * Mask the PLL but don't wait for it to be disabled. PLL may be -+ * shared between cores and will be still up if there is another -+ * core using it. -+ */ -+ bcma_mask32(core, BCMA_CLKCTLST, ~req); -+ bcma_read32(core, BCMA_CLKCTLST); - } - } - EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); ---- a/drivers/bcma/driver_chipcommon.c -+++ b/drivers/bcma/driver_chipcommon.c -@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked - return value; - } - --static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc) -+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc) - { - if (cc->capabilities & BCMA_CC_CAP_PMU) - return bcma_pmu_get_alp_clock(cc); - - return 20000000; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock); - - static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc) - { -@@ -139,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc - bcma_core_chipcommon_early_init(cc); - - if (cc->core->id.rev >= 20) { -- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); -- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); -+ u32 pullup = 0, pulldown = 0; -+ -+ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) { -+ pullup = 0x402e0; -+ pulldown = 0x20500; -+ } -+ -+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup); -+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown); - } - - if (cc->capabilities & BCMA_CC_CAP_PMU) -@@ -213,6 +221,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv - - return res; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out); - - u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) - { -@@ -225,6 +234,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d - - return res; - } -+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen); - - /* - * If the bit is set to 0, chipcommon controlls this GPIO, -@@ -329,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma - return; - } - -- irq = bcma_core_mips_irq(cc->core); -+ irq = bcma_core_irq(cc->core); - - /* Determine the registers of the UARTs */ - cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); ---- a/drivers/bcma/driver_chipcommon_nflash.c -+++ b/drivers/bcma/driver_chipcommon_nflash.c -@@ -5,11 +5,11 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - -+#include "bcma_private.h" -+ - #include <linux/platform_device.h> - #include <linux/bcma/bcma.h> - --#include "bcma_private.h" -- - struct platform_device bcma_nflash_dev = { - .name = "bcma_nflash", - .num_resources = 0, ---- a/drivers/bcma/driver_chipcommon_pmu.c -+++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b - } - EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); - -+static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc) -+{ -+ u32 ilp_ctl, alp_hz; -+ -+ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & -+ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) -+ return 0; -+ -+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, -+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); -+ usleep_range(1000, 2000); -+ -+ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); -+ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; -+ -+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); -+ -+ alp_hz = ilp_ctl * 32768 / 4; -+ return (alp_hz + 50000) / 100000 * 100; -+} -+ -+static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ u32 freq_tgt_target = 0, freq_tgt_current; -+ u32 pll0, mask; -+ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM43142: -+ /* pmu2_xtaltab0_adfll_485 */ -+ switch (xtalfreq) { -+ case 12000: -+ freq_tgt_target = 0x50D52; -+ break; -+ case 20000: -+ freq_tgt_target = 0x307FE; -+ break; -+ case 26000: -+ freq_tgt_target = 0x254EA; -+ break; -+ case 37400: -+ freq_tgt_target = 0x19EF8; -+ break; -+ case 52000: -+ freq_tgt_target = 0x12A75; -+ break; -+ } -+ break; -+ } -+ -+ if (!freq_tgt_target) { -+ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n", -+ xtalfreq); -+ return; -+ } -+ -+ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0); -+ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >> -+ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; -+ -+ if (freq_tgt_current == freq_tgt_target) { -+ bcma_debug(bus, "Target TGT frequency already set\n"); -+ return; -+ } -+ -+ /* Turn off PLL */ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM43142: -+ mask = (u32)~(BCMA_RES_4314_HT_AVAIL | -+ BCMA_RES_4314_MACPHY_CLK_AVAIL); -+ -+ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); -+ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); -+ bcma_wait_value(cc->core, BCMA_CLKCTLST, -+ BCMA_CLKCTLST_HAVEHT, 0, 20000); -+ break; -+ } -+ -+ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK; -+ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; -+ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0); -+ -+ /* Flush */ -+ if (cc->pmu.rev >= 2) -+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); -+ -+ /* TODO: Do we need to update OTP? */ -+} -+ -+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) -+{ -+ struct bcma_bus *bus = cc->core->bus; -+ u32 xtalfreq = bcma_pmu_xtalfreq(cc); -+ -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM43142: -+ if (xtalfreq == 0) -+ xtalfreq = 20000; -+ bcma_pmu2_pll_init0(cc, xtalfreq); -+ break; -+ } -+} -+ - static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; -@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru - min_msk = 0x200D; - max_msk = 0xFFFF; - break; -+ case BCMA_CHIP_ID_BCM43142: -+ min_msk = BCMA_RES_4314_LPLDO_PU | -+ BCMA_RES_4314_PMU_SLEEP_DIS | -+ BCMA_RES_4314_PMU_BG_PU | -+ BCMA_RES_4314_CBUCK_LPOM_PU | -+ BCMA_RES_4314_CBUCK_PFM_PU | -+ BCMA_RES_4314_CLDO_PU | -+ BCMA_RES_4314_LPLDO2_LVM | -+ BCMA_RES_4314_WL_PMU_PU | -+ BCMA_RES_4314_LDO3P3_PU | -+ BCMA_RES_4314_OTP_PU | -+ BCMA_RES_4314_WL_PWRSW_PU | -+ BCMA_RES_4314_LQ_AVAIL | -+ BCMA_RES_4314_LOGIC_RET | -+ BCMA_RES_4314_MEM_SLEEP | -+ BCMA_RES_4314_MACPHY_RET | -+ BCMA_RES_4314_WL_CORE_READY; -+ max_msk = 0x3FFFFFFF; -+ break; - default: - bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n", - bus->chipinfo.id); -@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c - bcma_cc_set32(cc, BCMA_CC_PMU_CTL, - BCMA_CC_PMU_CTL_NOILPONW); - -+ bcma_pmu_pll_init(cc); - bcma_pmu_resources_init(cc); - bcma_pmu_workarounds(cc); - } -@@ -174,19 +297,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d - struct bcma_bus *bus = cc->core->bus; - - switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4313: -+ case BCMA_CHIP_ID_BCM43224: -+ case BCMA_CHIP_ID_BCM43225: -+ case BCMA_CHIP_ID_BCM43227: -+ case BCMA_CHIP_ID_BCM43228: -+ case BCMA_CHIP_ID_BCM4331: -+ case BCMA_CHIP_ID_BCM43421: -+ case BCMA_CHIP_ID_BCM43428: -+ case BCMA_CHIP_ID_BCM43431: - case BCMA_CHIP_ID_BCM4716: -- case BCMA_CHIP_ID_BCM4748: - case BCMA_CHIP_ID_BCM47162: -- case BCMA_CHIP_ID_BCM4313: -- case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4748: - case BCMA_CHIP_ID_BCM4749: -+ case BCMA_CHIP_ID_BCM5357: - case BCMA_CHIP_ID_BCM53572: -+ case BCMA_CHIP_ID_BCM6362: - /* always 20Mhz */ - return 20000 * 1000; -- case BCMA_CHIP_ID_BCM5356: - case BCMA_CHIP_ID_BCM4706: -+ case BCMA_CHIP_ID_BCM5356: - /* always 25Mhz */ - return 25000 * 1000; -+ case BCMA_CHIP_ID_BCM43460: -+ case BCMA_CHIP_ID_BCM4352: -+ case BCMA_CHIP_ID_BCM4360: -+ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ) -+ return 40000 * 1000; -+ else -+ return 20000 * 1000; - default: - bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n", - bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); -@@ -264,7 +403,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st - } - - /* query bus clock frequency for PMU-enabled chipcommon */ --static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) -+u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) - { - struct bcma_bus *bus = cc->core->bus; - -@@ -293,6 +432,7 @@ static u32 bcma_pmu_get_bus_clock(struct - } - return BCMA_CC_PMU_HT_CLOCK; - } -+EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock); - - /* query cpu clock frequency for PMU-enabled chipcommon */ - u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc) -@@ -372,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; - bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); - -- tmp = 1 << 10; -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; - break; - - case BCMA_CHIP_ID_BCM4331: -@@ -393,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, - 0x03000a08); - } -- tmp = 1 << 10; -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; - break; - - case BCMA_CHIP_ID_BCM43224: -@@ -426,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, - 0x88888815); - } -- tmp = 1 << 10; -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; - break; - - case BCMA_CHIP_ID_BCM4716: -@@ -460,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - 0x88888815); - } - -- tmp = 3 << 9; -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW; - break; - - case BCMA_CHIP_ID_BCM43227: -@@ -496,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct - bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, - 0x88888815); - } -- tmp = 1 << 10; -+ tmp = BCMA_CC_PMU_CTL_PLL_UPD; - break; - default: - bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", ---- a/drivers/bcma/driver_chipcommon_sflash.c -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -5,11 +5,11 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - -+#include "bcma_private.h" -+ - #include <linux/platform_device.h> - #include <linux/bcma/bcma.h> - --#include "bcma_private.h" -- - static struct resource bcma_sflash_resource = { - .name = "bcma_sflash", - .start = BCMA_SOC_FLASH2, -@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e { - u16 numblocks; - }; - --static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { -+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { - { "M25P20", 0x11, 0x10000, 4, }, - { "M25P40", 0x12, 0x10000, 8, }, - -@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sfl - { 0 }, - }; - --static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { -+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { - { "SST25WF512", 1, 0x1000, 16, }, - { "SST25VF512", 0x48, 0x1000, 16, }, - { "SST25WF010", 2, 0x1000, 32, }, -@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sfl - { 0 }, - }; - --static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { -+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { - { "AT45DB011", 0xc, 256, 512, }, - { "AT45DB021", 0x14, 256, 1024, }, - { "AT45DB041", 0x1c, 256, 2048, }, -@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc - { - struct bcma_bus *bus = cc->core->bus; - struct bcma_sflash *sflash = &cc->sflash; -- struct bcma_sflash_tbl_e *e; -+ const struct bcma_sflash_tbl_e *e; - u32 id, id2; - - switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -73,6 +73,16 @@ static void bcma_gpio_free(struct gpio_c - bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); - } - -+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); -+ -+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -+ return bcma_core_irq(cc->core); -+ else -+ return -EINVAL; -+} -+ - int bcma_gpio_init(struct bcma_drv_cc *cc) - { - struct gpio_chip *chip = &cc->gpio; -@@ -85,6 +95,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c - chip->set = bcma_gpio_set_value; - chip->direction_input = bcma_gpio_direction_input; - chip->direction_output = bcma_gpio_direction_output; -+ chip->to_irq = bcma_gpio_to_irq; - chip->ngpio = 16; - /* There is just one SoC in one device and its GPIO addresses should be - * deterministic to address them more easily. The other buses could get ---- a/drivers/bcma/driver_mips.c -+++ b/drivers/bcma/driver_mips.c -@@ -14,11 +14,33 @@ - - #include <linux/bcma/bcma.h> - -+#include <linux/mtd/physmap.h> -+#include <linux/platform_device.h> - #include <linux/serial.h> - #include <linux/serial_core.h> - #include <linux/serial_reg.h> - #include <linux/time.h> - -+static const char *part_probes[] = { "bcm47xxpart", NULL }; -+ -+static struct physmap_flash_data bcma_pflash_data = { -+ .part_probe_types = part_probes, -+}; -+ -+static struct resource bcma_pflash_resource = { -+ .name = "bcma_pflash", -+ .flags = IORESOURCE_MEM, -+}; -+ -+struct platform_device bcma_pflash_dev = { -+ .name = "physmap-flash", -+ .dev = { -+ .platform_data = &bcma_pflash_data, -+ }, -+ .resource = &bcma_pflash_resource, -+ .num_resources = 1, -+}; -+ - /* The 47162a0 hangs when reading MIPS DMP registers registers */ - static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) - { -@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct - return dev->core_index; - flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); - -- return flag & 0x1F; -+ if (flag) -+ return flag & 0x1F; -+ else -+ return 0x3f; - } - - /* Get the MIPS IRQ assignment for a specified device. - * If unassigned, 0 is returned. -+ * If disabled, 5 is returned. -+ * If not supported, 6 is returned. - */ --unsigned int bcma_core_mips_irq(struct bcma_device *dev) -+static unsigned int bcma_core_mips_irq(struct bcma_device *dev) - { - struct bcma_device *mdev = dev->bus->drv_mips.core; - u32 irqflag; - unsigned int irq; - - irqflag = bcma_core_mips_irqflag(dev); -+ if (irqflag == 0x3f) -+ return 6; - -- for (irq = 1; irq <= 4; irq++) -+ for (irq = 0; irq <= 4; irq++) - if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & - (1 << irqflag)) - return irq; - -- return 0; -+ return 5; - } --EXPORT_SYMBOL(bcma_core_mips_irq); -+ -+unsigned int bcma_core_irq(struct bcma_device *dev) -+{ -+ unsigned int mips_irq = bcma_core_mips_irq(dev); -+ return mips_irq <= 4 ? mips_irq + 2 : 0; -+} -+EXPORT_SYMBOL(bcma_core_irq); - - static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) - { -@@ -114,7 +149,7 @@ static void bcma_core_mips_set_irq(struc - bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), - bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & - ~(1 << irqflag)); -- else -+ else if (oldirq != 5) - bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); - - /* assign the new one */ -@@ -123,9 +158,9 @@ static void bcma_core_mips_set_irq(struc - bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | - (1 << irqflag)); - } else { -- u32 oldirqflag = bcma_read32(mdev, -- BCMA_MIPS_MIPS74K_INTMASK(irq)); -- if (oldirqflag) { -+ u32 irqinitmask = bcma_read32(mdev, -+ BCMA_MIPS_MIPS74K_INTMASK(irq)); -+ if (irqinitmask) { - struct bcma_device *core; - - /* backplane irq line is in use, find out who uses -@@ -133,7 +168,7 @@ static void bcma_core_mips_set_irq(struc - */ - list_for_each_entry(core, &bus->cores, list) { - if ((1 << bcma_core_mips_irqflag(core)) == -- oldirqflag) { -+ irqinitmask) { - bcma_core_mips_set_irq(core, 0); - break; - } -@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc - 1 << irqflag); - } - -- bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", -- dev->id.id, oldirq + 2, irq + 2); -+ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); -+} -+ -+static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, -+ u16 coreid, u8 unit) -+{ -+ struct bcma_device *core; -+ -+ core = bcma_find_core_unit(bus, coreid, unit); -+ if (!core) { -+ bcma_warn(bus, -+ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", -+ coreid, unit); -+ return; -+ } -+ -+ bcma_core_mips_set_irq(core, irq); - } - - static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) - { - int i; - static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); -+ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); - for (i = 0; i <= 6; i++) - printk(" %s%s", irq_name[i], i == irq ? "*" : " "); - printk("\n"); -@@ -182,6 +233,7 @@ static void bcma_core_mips_flash_detect( - { - struct bcma_bus *bus = mcore->core->bus; - struct bcma_drv_cc *cc = &bus->drv_cc; -+ struct bcma_pflash *pflash = &cc->pflash; - - switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { - case BCMA_CC_FLASHT_STSER: -@@ -191,15 +243,20 @@ static void bcma_core_mips_flash_detect( - break; - case BCMA_CC_FLASHT_PARA: - bcma_debug(bus, "Found parallel flash\n"); -- cc->pflash.present = true; -- cc->pflash.window = BCMA_SOC_FLASH2; -- cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; -+ pflash->present = true; -+ pflash->window = BCMA_SOC_FLASH2; -+ pflash->window_size = BCMA_SOC_FLASH2_SZ; - - if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & - BCMA_CC_FLASH_CFG_DS) == 0) -- cc->pflash.buswidth = 1; -+ pflash->buswidth = 1; - else -- cc->pflash.buswidth = 2; -+ pflash->buswidth = 2; -+ -+ bcma_pflash_data.width = pflash->buswidth; -+ bcma_pflash_resource.start = pflash->window; -+ bcma_pflash_resource.end = pflash->window + pflash->window_size; -+ - break; - default: - bcma_err(bus, "Flash type not supported\n"); -@@ -227,6 +284,32 @@ void bcma_core_mips_early_init(struct bc - mcore->early_setup_done = true; - } - -+static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) -+{ -+ struct bcma_device *cpu, *pcie, *i2s; -+ -+ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) -+ * (IRQ flags > 7 are ignored when setting the interrupt masks) -+ */ -+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && -+ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) -+ return; -+ -+ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); -+ pcie = bcma_find_core(bus, BCMA_CORE_PCIE); -+ i2s = bcma_find_core(bus, BCMA_CORE_I2S); -+ if (cpu && pcie && i2s && -+ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && -+ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && -+ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { -+ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); -+ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); -+ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); -+ bcma_debug(bus, -+ "Moved i2s interrupt to oob line 7 instead of 8\n"); -+ } -+} -+ - void bcma_core_mips_init(struct bcma_drv_mips *mcore) - { - struct bcma_bus *bus; -@@ -236,43 +319,55 @@ void bcma_core_mips_init(struct bcma_drv - if (mcore->setup_done) - return; - -- bcma_info(bus, "Initializing MIPS core...\n"); -+ bcma_debug(bus, "Initializing MIPS core...\n"); - - bcma_core_mips_early_init(mcore); - -- mcore->assigned_irqs = 1; -+ bcma_fix_i2s_irqflag(bus); - -- /* Assign IRQs to all cores on the bus */ -- list_for_each_entry(core, &bus->cores, list) { -- int mips_irq; -- if (core->irq) -- continue; -- -- mips_irq = bcma_core_mips_irq(core); -- if (mips_irq > 4) -- core->irq = 0; -- else -- core->irq = mips_irq + 2; -- if (core->irq > 5) -- continue; -- switch (core->id.id) { -- case BCMA_CORE_PCI: -- case BCMA_CORE_PCIE: -- case BCMA_CORE_ETHERNET: -- case BCMA_CORE_ETHERNET_GBIT: -- case BCMA_CORE_MAC_GBIT: -- case BCMA_CORE_80211: -- case BCMA_CORE_USB20_HOST: -- /* These devices get their own IRQ line if available, -- * the rest goes on IRQ0 -- */ -- if (mcore->assigned_irqs <= 4) -- bcma_core_mips_set_irq(core, -- mcore->assigned_irqs++); -- break; -+ switch (bus->chipinfo.id) { -+ case BCMA_CHIP_ID_BCM4716: -+ case BCMA_CHIP_ID_BCM4748: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); -+ break; -+ case BCMA_CHIP_ID_BCM5356: -+ case BCMA_CHIP_ID_BCM47162: -+ case BCMA_CHIP_ID_BCM53572: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ break; -+ case BCMA_CHIP_ID_BCM5357: -+ case BCMA_CHIP_ID_BCM4749: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); -+ break; -+ case BCMA_CHIP_ID_BCM4706: -+ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); -+ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, -+ 0); -+ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); -+ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); -+ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, -+ 0); -+ break; -+ default: -+ list_for_each_entry(core, &bus->cores, list) { -+ core->irq = bcma_core_irq(core); - } -+ bcma_err(bus, -+ "Unknown device (0x%x) found, can not configure IRQs\n", -+ bus->chipinfo.id); - } -- bcma_info(bus, "IRQ reconfiguration done\n"); -+ bcma_debug(bus, "IRQ reconfiguration done\n"); - bcma_core_mips_dump_irq(bus); - - mcore->setup_done = true; ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -94,19 +94,19 @@ static int bcma_extpci_read_config(struc - if (dev == 0) { - /* we support only two functions on device 0 */ - if (func > 1) -- return -EINVAL; -+ goto out; - - /* accesses to config registers with offsets >= 256 - * requires indirect access. - */ - if (off >= PCI_CONFIG_SPACE_SIZE) { - addr = (func << 12); -- addr |= (off & 0x0FFF); -+ addr |= (off & 0x0FFC); - val = bcma_pcie_read_config(pc, addr); - } else { - addr = BCMA_CORE_PCI_PCICFG0; - addr |= (func << 8); -- addr |= (off & 0xfc); -+ addr |= (off & 0xFC); - val = pcicore_read32(pc, addr); - } - } else { -@@ -119,11 +119,9 @@ static int bcma_extpci_read_config(struc - goto out; - - if (mips_busprobe32(val, mmio)) { -- val = 0xffffffff; -+ val = 0xFFFFFFFF; - goto unmap; - } -- -- val = readl(mmio); - } - val >>= (8 * (off & 3)); - -@@ -151,7 +149,7 @@ static int bcma_extpci_write_config(stru - const void *buf, int len) - { - int err = -EINVAL; -- u32 addr = 0, val = 0; -+ u32 addr, val; - void __iomem *mmio = 0; - u16 chipid = pc->core->bus->chipinfo.id; - -@@ -159,16 +157,22 @@ static int bcma_extpci_write_config(stru - if (unlikely(len != 1 && len != 2 && len != 4)) - goto out; - if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ goto out; -+ - /* accesses to config registers with offsets >= 256 - * requires indirect access. - */ -- if (off < PCI_CONFIG_SPACE_SIZE) { -- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFC); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; - addr |= (func << 8); -- addr |= (off & 0xfc); -- mmio = ioremap_nocache(addr, sizeof(val)); -- if (!mmio) -- goto out; -+ addr |= (off & 0xFC); -+ val = pcicore_read32(pc, addr); - } - } else { - addr = bcma_get_cfgspace_addr(pc, dev, func, off); -@@ -180,19 +184,17 @@ static int bcma_extpci_write_config(stru - goto out; - - if (mips_busprobe32(val, mmio)) { -- val = 0xffffffff; -+ val = 0xFFFFFFFF; - goto unmap; - } - } - - switch (len) { - case 1: -- val = readl(mmio); - val &= ~(0xFF << (8 * (off & 3))); - val |= *((const u8 *)buf) << (8 * (off & 3)); - break; - case 2: -- val = readl(mmio); - val &= ~(0xFFFF << (8 * (off & 3))); - val |= *((const u16 *)buf) << (8 * (off & 3)); - break; -@@ -200,13 +202,14 @@ static int bcma_extpci_write_config(stru - val = *((const u32 *)buf); - break; - } -- if (dev == 0 && !addr) { -+ if (dev == 0) { - /* accesses to config registers with offsets >= 256 - * requires indirect access. - */ -- addr = (func << 12); -- addr |= (off & 0x0FFF); -- bcma_pcie_write_config(pc, addr, val); -+ if (off >= PCI_CONFIG_SPACE_SIZE) -+ bcma_pcie_write_config(pc, addr, val); -+ else -+ pcicore_write32(pc, addr, val); - } else { - writel(val, mmio); - -@@ -276,7 +279,7 @@ static u8 bcma_find_pci_capability(struc - /* check for Header type 0 */ - bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, - sizeof(u8)); -- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) -+ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) - return cap_ptr; - - /* check if the capability pointer field exists */ -@@ -401,6 +404,8 @@ void bcma_core_pci_hostmode_init(struct - return; - } - -+ spin_lock_init(&pc_host->cfgspace_lock); -+ - pc->host_controller = pc_host; - pc_host->pci_controller.io_resource = &pc_host->io_resource; - pc_host->pci_controller.mem_resource = &pc_host->mem_resource; -@@ -426,7 +431,7 @@ void bcma_core_pci_hostmode_init(struct - /* Reset RC */ - usleep_range(3000, 5000); - pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); -- usleep_range(1000, 2000); -+ msleep(50); - pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | - BCMA_CORE_PCI_CTL_RST_OE); - -@@ -488,6 +493,17 @@ void bcma_core_pci_hostmode_init(struct - - bcma_core_pci_enable_crs(pc); - -+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || -+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { -+ u16 val16; -+ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, -+ &val16, sizeof(val16)); -+ val16 |= (2 << 5); /* Max payload size of 512 */ -+ val16 |= (2 << 12); /* MRRS 512 */ -+ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, -+ &val16, sizeof(val16)); -+ } -+ - /* Enable PCI bridge BAR0 memory & master access */ - tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -@@ -565,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI - int bcma_core_pci_plat_dev_init(struct pci_dev *dev) - { - struct bcma_drv_pci_host *pc_host; -+ int readrq; - - if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { - /* This is not a device on the PCI-core bridge. */ -@@ -576,9 +593,14 @@ int bcma_core_pci_plat_dev_init(struct p - pr_info("PCI: Fixing up device %s\n", pci_name(dev)); - - /* Fix up interrupt lines */ -- dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; -+ dev->irq = bcma_core_irq(pc_host->pdev->core); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - -+ readrq = pcie_get_readrq(dev); -+ if (readrq > 128) { -+ pr_info("change PCIe max read request size from %i to 128\n", readrq); -+ pcie_set_readrq(dev, 128); -+ } - return 0; - } - EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -@@ -595,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const - - pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, - pci_ops); -- return bcma_core_mips_irq(pc_host->pdev->core) + 2; -+ return bcma_core_irq(pc_host->pdev->core); - } - EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, - { 0, }, - }; ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struc - } - EXPORT_SYMBOL_GPL(bcma_find_core); - --static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, -- u8 unit) -+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, -+ u8 unit) - { - struct bcma_device *core; - -@@ -93,6 +93,25 @@ static struct bcma_device *bcma_find_cor - return NULL; - } - -+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, -+ int timeout) -+{ -+ unsigned long deadline = jiffies + timeout; -+ u32 val; -+ -+ do { -+ val = bcma_read32(core, reg); -+ if ((val & mask) == value) -+ return true; -+ cpu_relax(); -+ udelay(10); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); -+ -+ return false; -+} -+ - static void bcma_release_core_dev(struct device *dev) - { - struct bcma_device *core = container_of(dev, struct bcma_device, dev); -@@ -120,6 +139,11 @@ static int bcma_register_cores(struct bc - continue; - } - -+ /* Only first GMAC core on BCM4706 is connected and working */ -+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && -+ core->core_unit > 0) -+ continue; -+ - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; - dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); -@@ -149,6 +173,14 @@ static int bcma_register_cores(struct bc - dev_id++; - } - -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+ if (bus->drv_cc.pflash.present) { -+ err = platform_device_register(&bcma_pflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering parallel flash\n"); -+ } -+#endif -+ - #ifdef CONFIG_BCMA_SFLASH - if (bus->drv_cc.sflash.present) { - err = platform_device_register(&bcma_sflash_dev); -@@ -205,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b - err = bcma_bus_scan(bus); - if (err) { - bcma_err(bus, "Failed to scan: %d\n", err); -- return -1; -+ return err; - } - - /* Early init CC core */ ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -32,6 +32,18 @@ static const struct bcma_device_id_name - { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, - { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, - { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, -+ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, -+ { BCMA_CORE_DMA, "DMA" }, -+ { BCMA_CORE_SDIO3, "SDIO3" }, -+ { BCMA_CORE_USB20, "USB 2.0" }, -+ { BCMA_CORE_USB30, "USB 3.0" }, -+ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, -+ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, -+ { BCMA_CORE_ROM, "ROM" }, -+ { BCMA_CORE_NAND, "NAND flash controller" }, -+ { BCMA_CORE_QSPI, "SPI flash controller" }, -+ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, -+ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, - { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, - { BCMA_CORE_ALTA, "ALTA (I2S)" }, - { BCMA_CORE_INVALID, "Invalid" }, -@@ -84,6 +96,8 @@ static const struct bcma_device_id_name - { BCMA_CORE_I2S, "I2S" }, - { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, - { BCMA_CORE_SHIM, "SHIM" }, -+ { BCMA_CORE_PCIE2, "PCIe Gen2" }, -+ { BCMA_CORE_ARM_CR4, "ARM CR4" }, - { BCMA_CORE_DEFAULT, "Default" }, - }; - -@@ -137,19 +151,19 @@ static void bcma_scan_switch_core(struct - addr); - } - --static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) -+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = readl(*eromptr); - (*eromptr)++; - return ent; - } - --static void bcma_erom_push_ent(u32 **eromptr) -+static void bcma_erom_push_ent(u32 __iomem **eromptr) - { - (*eromptr)--; - } - --static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) -+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - if (!(ent & SCAN_ER_VALID)) -@@ -159,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ - return ent; - } - --static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) -+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - bcma_erom_push_ent(eromptr); - return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); - } - --static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) -+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - bcma_erom_push_ent(eromptr); -@@ -175,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b - ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); - } - --static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) -+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent; - while (1) { -@@ -189,7 +203,7 @@ static void bcma_erom_skip_component(str - bcma_erom_push_ent(eromptr); - } - --static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) -+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr) - { - u32 ent = bcma_erom_get_ent(bus, eromptr); - if (!(ent & SCAN_ER_VALID)) -@@ -199,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct - return ent; - } - --static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, - u32 type, u8 port) - { - u32 addrl, addrh, sizel, sizeh = 0; -@@ -211,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc - ((ent & SCAN_ADDR_TYPE) != type) || - (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { - bcma_erom_push_ent(eromptr); -- return -EINVAL; -+ return (u32)-EINVAL; - } - - addrl = ent & SCAN_ADDR_ADDR; -@@ -255,11 +269,13 @@ static struct bcma_device *bcma_find_cor - return NULL; - } - -+#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) -+ - static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, - struct bcma_device_id *match, int core_num, - struct bcma_device *core) - { -- s32 tmp; -+ u32 tmp; - u8 i, j; - s32 cia, cib; - u8 ports[2], wrappers[2]; -@@ -337,11 +353,11 @@ static int bcma_get_next_core(struct bcm - * the main register space for the core - */ - tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -- if (tmp <= 0) { -+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { - /* Try again to see if it is a bridge */ - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_BRIDGE, 0); -- if (tmp <= 0) { -+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { - return -EILSEQ; - } else { - bcma_info(bus, "Bridge found\n"); -@@ -355,7 +371,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SLAVE, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: slave port %d " - * "has %d descriptors\n", i, j); */ -@@ -372,7 +388,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_MWRAP, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * "has %d descriptors\n", i, j); */ -@@ -390,7 +406,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SWRAP, i + hack); -- if (tmp < 0) { -+ if (IS_ERR_VALUE_U32(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * has %d descriptors\n", i, j); */ ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -72,12 +72,12 @@ fail: - * R/W ops. - **************************************************/ - --static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) -+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom, -+ size_t words) - { - int i; -- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) -- sprom[i] = bcma_read16(bus->drv_cc.core, -- offset + (i * 2)); -+ for (i = 0; i < words; i++) -+ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2)); - } - - /************************************************** -@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da - return t[crc ^ data]; - } - --static u8 bcma_sprom_crc(const u16 *sprom) -+static u8 bcma_sprom_crc(const u16 *sprom, size_t words) - { - int word; - u8 crc = 0xFF; - -- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { -+ for (word = 0; word < words - 1; word++) { - crc = bcma_crc8(crc, sprom[word] & 0x00FF); - crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); - } -- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); -+ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF); - crc ^= 0xFF; - - return crc; - } - --static int bcma_sprom_check_crc(const u16 *sprom) -+static int bcma_sprom_check_crc(const u16 *sprom, size_t words) - { - u8 crc; - u8 expected_crc; - u16 tmp; - -- crc = bcma_sprom_crc(sprom); -- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; -+ crc = bcma_sprom_crc(sprom, words); -+ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC; - expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; - if (crc != expected_crc) - return -EPROTO; -@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1 - return 0; - } - --static int bcma_sprom_valid(const u16 *sprom) -+static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom, -+ size_t words) - { - u16 revision; - int err; - -- err = bcma_sprom_check_crc(sprom); -+ err = bcma_sprom_check_crc(sprom, words); - if (err) - return err; - -- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; -- if (revision != 8 && revision != 9) { -+ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV; -+ if (revision != 8 && revision != 9 && revision != 10) { - pr_err("Unsupported SPROM revision: %d\n", revision); - return -ENOENT; - } - -+ bus->sprom.revision = revision; -+ bcma_debug(bus, "Found SPROM revision %d\n", revision); -+ - return 0; - } - -@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct - BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != - ARRAY_SIZE(bus->sprom.core_pwr_info)); - -- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & -- SSB_SPROM_REVISION_REV; -- - for (i = 0; i < 3; i++) { - v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; - *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); - } - - SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0); - - SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, - SSB_SPROM4_TXPID2G0_SHIFT); -@@ -501,7 +503,7 @@ static bool bcma_sprom_onchip_available( - case BCMA_CHIP_ID_BCM4331: - present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; - break; -- -+ case BCMA_CHIP_ID_BCM43142: - case BCMA_CHIP_ID_BCM43224: - case BCMA_CHIP_ID_BCM43225: - /* for these chips OTP is always available */ -@@ -549,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus) - { - u16 offset = BCMA_CC_SPROM; - u16 *sprom; -- int err = 0; -+ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4, -+ SSB_SPROMSIZE_WORDS_R10, }; -+ int i, err = 0; - - if (!bus->drv_cc.core) - return -EOPNOTSUPP; -@@ -578,32 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus) - } - } - -- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), -- GFP_KERNEL); -- if (!sprom) -- return -ENOMEM; -- - if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || - bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) - bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); - - bcma_debug(bus, "SPROM offset 0x%x\n", offset); -- bcma_sprom_read(bus, offset, sprom); -+ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) { -+ size_t words = sprom_sizes[i]; -+ -+ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL); -+ if (!sprom) -+ return -ENOMEM; -+ -+ bcma_sprom_read(bus, offset, sprom, words); -+ err = bcma_sprom_valid(bus, sprom, words); -+ if (!err) -+ break; -+ -+ kfree(sprom); -+ } - - if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || - bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) - bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); - -- err = bcma_sprom_valid(sprom); - if (err) { -- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n"); -+ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n"); - err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -- goto out; -+ } else { -+ bcma_sprom_extract_r8(bus, sprom); -+ kfree(sprom); - } - -- bcma_sprom_extract_r8(bus, sprom); -- --out: -- kfree(sprom); - return err; - } ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -72,7 +72,19 @@ struct bcma_host_ops { - /* Core-ID values. */ - #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ - #define BCMA_CORE_4706_CHIPCOMMON 0x500 -+#define BCMA_CORE_PCIEG2 0x501 -+#define BCMA_CORE_DMA 0x502 -+#define BCMA_CORE_SDIO3 0x503 -+#define BCMA_CORE_USB20 0x504 -+#define BCMA_CORE_USB30 0x505 -+#define BCMA_CORE_A9JTAG 0x506 -+#define BCMA_CORE_DDR23 0x507 -+#define BCMA_CORE_ROM 0x508 -+#define BCMA_CORE_NAND 0x509 -+#define BCMA_CORE_QSPI 0x50A -+#define BCMA_CORE_CHIPCOMMON_B 0x50B - #define BCMA_CORE_4706_SOC_RAM 0x50E -+#define BCMA_CORE_ARMCA9 0x510 - #define BCMA_CORE_4706_MAC_GBIT 0x52D - #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ - #define BCMA_CORE_ALTA 0x534 /* I2S core */ -@@ -134,12 +146,20 @@ struct bcma_host_ops { - #define BCMA_CORE_I2S 0x834 - #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ - #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -+#define BCMA_CORE_PHY_AC 0x83B -+#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ -+#define BCMA_CORE_USB30_DEV 0x83D -+#define BCMA_CORE_ARM_CR4 0x83E - #define BCMA_CORE_DEFAULT 0xFFF - - #define BCMA_MAX_NR_CORES 16 - - /* Chip IDs of PCIe devices */ - #define BCMA_CHIP_ID_BCM4313 0x4313 -+#define BCMA_CHIP_ID_BCM43142 43142 -+#define BCMA_CHIP_ID_BCM43131 43131 -+#define BCMA_CHIP_ID_BCM43217 43217 -+#define BCMA_CHIP_ID_BCM43222 43222 - #define BCMA_CHIP_ID_BCM43224 43224 - #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 - #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -@@ -172,6 +192,65 @@ struct bcma_host_ops { - #define BCMA_PKG_ID_BCM5357 11 - #define BCMA_CHIP_ID_BCM53572 53572 - #define BCMA_PKG_ID_BCM47188 9 -+#define BCMA_CHIP_ID_BCM4707 53010 -+#define BCMA_PKG_ID_BCM4707 1 -+#define BCMA_PKG_ID_BCM4708 2 -+#define BCMA_PKG_ID_BCM4709 0 -+#define BCMA_CHIP_ID_BCM53018 53018 -+ -+/* Board types (on PCI usually equals to the subsystem dev id) */ -+/* BCM4313 */ -+#define BCMA_BOARD_TYPE_BCM94313BU 0X050F -+#define BCMA_BOARD_TYPE_BCM94313HM 0X0510 -+#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511 -+#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C -+/* BCM4716 */ -+#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD -+/* BCM43224 */ -+#define BCMA_BOARD_TYPE_BCM943224X21 0X056E -+#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1 -+#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9 -+#define BCMA_BOARD_TYPE_BCM943224M93 0X008B -+#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090 -+#define BCMA_BOARD_TYPE_BCM943224X16 0X0093 -+#define BCMA_BOARD_TYPE_BCM94322X9 0X008D -+#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E -+/* BCM43228 */ -+#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540 -+#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541 -+#define BCMA_BOARD_TYPE_BCM943228BU 0X0542 -+#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543 -+#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544 -+#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545 -+#define BCMA_BOARD_TYPE_BCM943228SD 0X0573 -+/* BCM4331 */ -+#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6 -+#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4 -+#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E -+#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4 -+#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC -+#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED -+#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF -+#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF -+#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5 -+#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4 -+#define BCMA_BOARD_TYPE_BCM94331BU 0X0523 -+#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524 -+#define BCMA_BOARD_TYPE_BCM94331MC 0X0525 -+#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526 -+#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527 -+#define BCMA_BOARD_TYPE_BCM94331HM 0X0574 -+#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B -+#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9 -+#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6 -+#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA -+/* BCM53572 */ -+#define BCMA_BOARD_TYPE_BCM953572BU 0X058D -+#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E -+#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F -+#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 -+/* BCM43142 */ -+#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 - - struct bcma_device { - struct bcma_bus *bus; ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -27,7 +27,7 @@ - #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ - #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ - #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ --#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ -+#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ - #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ - #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ - #define BCMA_PLLTYPE_NONE 0x00000000 -@@ -104,6 +104,7 @@ - #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ - #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ - #define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ -+#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001 - #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ - #define BCMA_CC_JCMD_START 0x80000000 - #define BCMA_CC_JCMD_BUSY 0x80000000 -@@ -315,6 +316,9 @@ - #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ - #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ - #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 -+#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ -+#define BCMA_CC_PMU_CTL_RES_SHIFT 13 -+#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ - #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 - #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ - #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ -@@ -326,6 +330,8 @@ - #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ - #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ - #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ -+#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 -+#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 - #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ - #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ - #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ -@@ -351,6 +357,11 @@ - #define BCMA_CC_REGCTL_DATA 0x065C - #define BCMA_CC_PLLCTL_ADDR 0x0660 - #define BCMA_CC_PLLCTL_DATA 0x0664 -+#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ -+#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ -+#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF -+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 -+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 - #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ - /* NAND flash MLC controller registers (corerev >= 38) */ - #define BCMA_CC_NAND_REVISION 0x0C00 -@@ -431,6 +442,23 @@ - #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 - #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 - -+/* PMU rev 15 */ -+#define BCMA_CC_PMU15_PLL_PLLCTL0 0 -+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 -+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 -+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC -+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 -+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 -+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 -+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 -+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 -+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 -+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 -+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 -+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 -+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 -+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 -+ - /* ALP clock on pre-PMU chips */ - #define BCMA_CC_PMU_ALP_CLOCK 20000000 - /* HT clock for systems with PMU-enabled chipcommon */ -@@ -503,6 +531,37 @@ - #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) - #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) - -+#define BCMA_RES_4314_LPLDO_PU BIT(0) -+#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) -+#define BCMA_RES_4314_PMU_BG_PU BIT(2) -+#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) -+#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) -+#define BCMA_RES_4314_CLDO_PU BIT(5) -+#define BCMA_RES_4314_LPLDO2_LVM BIT(6) -+#define BCMA_RES_4314_WL_PMU_PU BIT(7) -+#define BCMA_RES_4314_LNLDO_PU BIT(8) -+#define BCMA_RES_4314_LDO3P3_PU BIT(9) -+#define BCMA_RES_4314_OTP_PU BIT(10) -+#define BCMA_RES_4314_XTAL_PU BIT(11) -+#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) -+#define BCMA_RES_4314_LQ_AVAIL BIT(13) -+#define BCMA_RES_4314_LOGIC_RET BIT(14) -+#define BCMA_RES_4314_MEM_SLEEP BIT(15) -+#define BCMA_RES_4314_MACPHY_RET BIT(16) -+#define BCMA_RES_4314_WL_CORE_READY BIT(17) -+#define BCMA_RES_4314_ILP_REQ BIT(18) -+#define BCMA_RES_4314_ALP_AVAIL BIT(19) -+#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) -+#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) -+#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) -+#define BCMA_RES_4314_RADIO_PU BIT(23) -+#define BCMA_RES_4314_VCO_LDO_PU BIT(24) -+#define BCMA_RES_4314_AFE_LDO_PU BIT(25) -+#define BCMA_RES_4314_RX_LDO_PU BIT(26) -+#define BCMA_RES_4314_TX_LDO_PU BIT(27) -+#define BCMA_RES_4314_HT_AVAIL BIT(28) -+#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) -+ - /* Data for the PMU, if available. - * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ -@@ -528,6 +587,7 @@ struct bcma_sflash { - u32 size; - - struct mtd_info *mtd; -+ void *priv; - }; - #endif - -@@ -606,6 +666,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct - - extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); - -+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); -+ - void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); - - u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); -@@ -634,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s - u32 offset, u32 mask, u32 set); - extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); - -+extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); -+ - #endif /* LINUX_BCMA_DRIVER_CC_H_ */ ---- a/include/linux/bcma/bcma_driver_mips.h -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -28,6 +28,7 @@ - #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 - #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 - -+#define BCMA_MIPS_OOBSELINA74 0x004 - #define BCMA_MIPS_OOBSELOUTA30 0x100 - - struct bcma_device; -@@ -36,19 +37,23 @@ struct bcma_drv_mips { - struct bcma_device *core; - u8 setup_done:1; - u8 early_setup_done:1; -- unsigned int assigned_irqs; - }; - - #ifdef CONFIG_BCMA_DRIVER_MIPS - extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); - extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); -+ -+extern unsigned int bcma_core_irq(struct bcma_device *core); - #else - static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } - static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } -+ -+static inline unsigned int bcma_core_irq(struct bcma_device *core) -+{ -+ return 0; -+} - #endif - - extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); - --extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); -- - #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -179,10 +179,33 @@ struct pci_dev; - #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ - #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ - -+#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 -+ -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -217,7 +240,9 @@ struct bcma_drv_pci { - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); -+extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ---- a/include/linux/bcma/bcma_regs.h -+++ b/include/linux/bcma/bcma_regs.h -@@ -37,6 +37,7 @@ - #define BCMA_IOST_BIST_DONE 0x8000 - #define BCMA_RESET_CTL 0x0800 - #define BCMA_RESET_CTL_RESET 0x0001 -+#define BCMA_RESET_ST 0x0804 - - /* BCMA PCI config space registers. */ - #define BCMA_PCI_PMCSR 0x44 ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -229,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_ - bcma_core_pci_clientmode_init(pc); - } - -+void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) -+{ -+ struct bcma_drv_pci *pc; -+ u16 data; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); -+ - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, - bool enable) - { -@@ -262,7 +295,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +307,29 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -@@ -685,27 +685,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en - return mode == BCMA_CLKMODE_FAST; - } - --void ai_pci_up(struct si_pub *sih) --{ -- struct si_info *sii; -- -- sii = container_of(sih, struct si_info, pub); -- -- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) -- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); --} -- --/* Unconfigure and/or apply various WARs when going down */ --void ai_pci_down(struct si_pub *sih) --{ -- struct si_info *sii; -- -- sii = container_of(sih, struct si_info, pub); -- -- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) -- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); --} -- - /* Enable BT-COEX & Ex-PA for 4313 */ - void ai_epa_4313war(struct si_pub *sih) - { ---- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h -+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h -@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st - extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); - extern bool ai_deviceremoved(struct si_pub *sih); - --extern void ai_pci_down(struct si_pub *sih); --extern void ai_pci_up(struct si_pub *sih); -- - /* Enable Ex-PA for 4313 */ - extern void ai_epa_4313war(struct si_pub *sih); - ---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c -@@ -4648,7 +4648,7 @@ static int brcms_b_attach(struct brcms_c - brcms_c_coredisable(wlc_hw); - - /* Match driver "down" state */ -- ai_pci_down(wlc_hw->sih); -+ bcma_core_pci_down(wlc_hw->d11core->bus); - - /* turn off pll and xtal to match driver "down" state */ - brcms_b_xtal(wlc_hw, OFF); -@@ -4991,12 +4991,12 @@ static int brcms_b_up_prep(struct brcms_ - */ - if (brcms_b_radio_read_hwdisabled(wlc_hw)) { - /* put SB PCI in down state again */ -- ai_pci_down(wlc_hw->sih); -+ bcma_core_pci_down(wlc_hw->d11core->bus); - brcms_b_xtal(wlc_hw, OFF); - return -ENOMEDIUM; - } - -- ai_pci_up(wlc_hw->sih); -+ bcma_core_pci_up(wlc_hw->d11core->bus); - - /* reset the d11 core */ - brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); -@@ -5193,7 +5193,7 @@ static int brcms_b_down_finish(struct br - - /* turn off primary xtal and pll */ - if (!wlc_hw->noreset) { -- ai_pci_down(wlc_hw->sih); -+ bcma_core_pci_down(wlc_hw->d11core->bus); - brcms_b_xtal(wlc_hw, OFF); - } - } |