diff options
Diffstat (limited to 'target/linux/ifxmips/patches-2.6.28/110-drivers.patch')
| -rw-r--r-- | target/linux/ifxmips/patches-2.6.28/110-drivers.patch | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch b/target/linux/ifxmips/patches-2.6.28/110-drivers.patch new file mode 100644 index 0000000..23ceb3c --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.28/110-drivers.patch @@ -0,0 +1,152 @@ +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o + obj-$(CONFIG_JS_RTC) += js-rtc.o + js-rtc-y = rtc.o + ++obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o ++obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o ++obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o ++ + # Files generated that shall be removed upon make clean + clean-files := consolemap_deftbl.c defkeymap.c + +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel) += nettel.o + obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o + obj-$(CONFIG_MTD_H720X) += h720x-flash.o + obj-$(CONFIG_MTD_SBC8240) += sbc8240.o ++obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o + obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o + obj-$(CONFIG_MTD_IXP2000) += ixp2000.o + obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -343,6 +343,12 @@ config MACB + + source "drivers/net/arm/Kconfig" + ++config IFXMIPS_MII0 ++ tristate "Infineon IFXMips eth0 driver" ++ depends on IFXMIPS ++ help ++ Support for the MII0 inside the IFXMips SOC ++ + config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS || SUPERH +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM + Currently, only 8250 compatible ports are supported, but + others can easily be added. + ++config SERIAL_IFXMIPS ++ bool "IFXMips serial driver" ++ depends on IFXMIPS ++ select SERIAL_CORE ++ select SERIAL_CORE_CONSOLE ++ help ++ Driver for the ifxmipss built in ASC hardware ++ + config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE +--- a/drivers/serial/Makefile ++++ b/drivers/serial/Makefile +@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s + obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o + obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o + obj-$(CONFIG_SERIAL_QE) += ucc_uart.o ++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o + + # PARISC Architecture + +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/ + obj-$(CONFIG_NIU) += niu.o + obj-$(CONFIG_VIRTIO_NET) += virtio_net.o + obj-$(CONFIG_SFC) += sfc/ +- ++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW + If you say N, all options in this submenu will be skipped and disabled. + + if CRYPTO_HW ++config CRYPTO_DEV_IFXMIPS ++ tristate "Support for IFXMIPS Data Encryption Unit" ++ depends on IFXMIPS + + config CRYPTO_DEV_PADLOCK + tristate "Support for VIA PadLock ACE" +--- a/drivers/crypto/Makefile ++++ b/drivers/crypto/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode- + obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o + obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o + obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o ++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -321,3 +321,10 @@ config USB_HWA_HCD + + To compile this driver a module, choose M here: the module + will be called "hwa-hc". ++ ++config USB_DWC_HCD ++ tristate "IFXMIPS USB Host Controller Driver" ++ depends on USB && IFXMIPS ++ default y ++ help ++ Danube USB Host Controller +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -171,6 +171,12 @@ config LEDS_DA903X + This option enables support for on-chip LED drivers found + on Dialog Semiconductor DA9030/DA9034 PMICs. + ++config LEDS_IFXMIPS ++ tristate "LED Support for IFXMIPS LEDs" ++ depends on LEDS_CLASS && IFXMIPS ++ help ++ This option enables support for the IFXMIPS LEDs. ++ + comment "LED Triggers" + + config LEDS_TRIGGERS +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o + obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o + obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o + obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o ++obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -747,6 +747,12 @@ config TXX9_WDT + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config IFXMIPS_WDT ++ bool "IFXMips watchdog" ++ depends on IFXMIPS ++ help ++ Hardware driver for the IFXMIPS Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture |