diff options
Diffstat (limited to 'target/linux/imx6/patches-3.14')
4 files changed, 151 insertions, 43 deletions
diff --git a/target/linux/imx6/patches-3.14/0055-ARM_dts_imx_fix-invallid-#address-cells-value.patch b/target/linux/imx6/patches-3.14/0055-ARM_dts_imx_fix-invallid-#address-cells-value.patch new file mode 100644 index 0000000..79472e8 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0055-ARM_dts_imx_fix-invallid-#address-cells-value.patch @@ -0,0 +1,55 @@ +commit d644122d8420c425fdf5c74e50d440d5f146bc0c +Author: Tim Harvey <tharvey@gateworks.com> +Date: Thu Mar 13 09:37:51 2014 -0700 + + ARM: dts: imx: fix invalid #address-cells value + + The invalid value of #address-cells in the imx6 pcie host controller node + causes of_irq_parse_raw() to incorrectly advance through an interrupt-map + table of more than one interrupt. We also take the opportunity to drop the + unused #size-cells here. + + This patch resolves this issue and allows proper interrupt mapping for an + imx6 pcie host connected to a P2P bridge when using legacy interrupts. + + Signed-off-by: Tim Harvey <tharvey@gateworks.com> + Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> + Cc: Jingoo Han <jg1.han@samsung.com> + Cc: Lucas Stach <l.stach@pengutronix.de> + Cc: Mark Rutland <mark.rutland@arm.com> + Cc: linux-samsung-soc <linux-samsung-soc@vger.kernel.org> + Cc: Richard Zhu <r65037@freescale.com> + Cc: Sascha Hauer <kernel@pengutronix.de> + Cc: Arnd Bergmann <arnd@arndb.de> + Cc: Stephen Warren <swarren@wwwdotorg.org> + Cc: Bjorn Helgaas <bhelgaas@google.com> + Cc: Simon Horman <horms@verge.net.au> + Cc: Thierry Reding <thierry.reding@gmail.com> + Cc: Ben Dooks <ben-linux@fluff.org> + Cc: linux-tegra <linux-tegra@vger.kernel.org> + Cc: Kukjin Kim <kgene.kim@samsung.com> + Cc: Shawn Guo <shawn.guo@linaro.org> + Cc: Grant Likely <grant.likely@linaro.org> + +--- a/arch/arm/boot/dts/imx6qdl.dtsi ++++ b/arch/arm/boot/dts/imx6qdl.dtsi +@@ -38,8 +38,6 @@ + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; +- #address-cells = <1>; +- #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; +--- a/arch/arm/boot/dts/imx6sl.dtsi ++++ b/arch/arm/boot/dts/imx6sl.dtsi +@@ -44,8 +44,6 @@ + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; +- #address-cells = <1>; +- #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; diff --git a/target/linux/imx6/patches-3.14/0060-pci_designware_use-new-OF-interrupt-mapping-when-possible.patch b/target/linux/imx6/patches-3.14/0060-pci_designware_use-new-OF-interrupt-mapping-when-possible.patch new file mode 100644 index 0000000..fff074a --- /dev/null +++ b/target/linux/imx6/patches-3.14/0060-pci_designware_use-new-OF-interrupt-mapping-when-possible.patch @@ -0,0 +1,58 @@ +commit 62fe03d1dd629a98c6da86cabb2a98b85e89d516 +Author: Lucas Stach <l.stach@pengutronix.de> +Date: Wed Mar 5 14:25:51 2014 +0100 + + PCI: designware: use new OF interrupt mapping when possible + + This is the recommended method of doing the IRQ + mapping. For old devicetrees we fall back to the + previous practice. + + Signed-off-by: Lucas Stach <l.stach@pengutronix.de> + Acked-by: Arnd Bergmann <arnd@arndb.de> + Acked-by: Jingoo Han <jg1.han@samsung.com> + Reviewed-by: Marek Vasut <marex@denx.de> + +--- a/drivers/pci/host/pcie-designware.c ++++ b/drivers/pci/host/pcie-designware.c +@@ -17,6 +17,7 @@ + #include <linux/module.h> + #include <linux/msi.h> + #include <linux/of_address.h> ++#include <linux/of_pci.h> + #include <linux/pci.h> + #include <linux/pci_regs.h> + #include <linux/types.h> +@@ -492,7 +493,7 @@ int __init dw_pcie_host_init(struct pcie + dw_pci.nr_controllers = 1; + dw_pci.private_data = (void **)&pp; + +- pci_common_init(&dw_pci); ++ pci_common_init_dev(pp->dev, &dw_pci); + pci_assign_unassigned_resources(); + #ifdef CONFIG_PCI_DOMAINS + dw_pci.domain++; +@@ -725,7 +726,7 @@ static struct pci_bus *dw_pcie_scan_bus( + + if (pp) { + pp->root_bus_nr = sys->busnr; +- bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops, ++ bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops, + sys, &sys->resources); + } else { + bus = NULL; +@@ -738,8 +739,13 @@ static struct pci_bus *dw_pcie_scan_bus( + static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + { + struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); ++ int irq; + +- return pp->irq; ++ irq = of_irq_parse_and_map_pci(dev, slot, pin); ++ if (!irq) ++ irq = pp->irq; ++ ++ return irq; + } + + static void dw_pcie_add_bus(struct pci_bus *bus) diff --git a/target/linux/imx6/patches-3.14/0065-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch b/target/linux/imx6/patches-3.14/0065-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch new file mode 100644 index 0000000..62ca2f3 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0065-ARM-dts-imx6-add-PCIe-interrupt-mapping-properties.patch @@ -0,0 +1,38 @@ +From 07134a365f1c4be6e840a00ae452d1593f15c5fc Mon Sep 17 00:00:00 2001 +From: Lucas Stach <l.stach@pengutronix.de> +Date: Wed, 5 Mar 2014 14:25:50 +0100 +Subject: [PATCH] ARM: dts: imx6: add PCIe interrupt mapping properties + +As defined by the common PCI bindings. + +Signed-off-by: Lucas Stach <l.stach@pengutronix.de> +Acked-by: Arnd Bergmann <arnd@arndb.de> +Signed-off-by: Shawn Guo <shawn.guo@linaro.org> +--- + arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/imx6qdl.dtsi ++++ b/arch/arm/boot/dts/imx6qdl.dtsi +@@ -10,6 +10,8 @@ + * http://www.gnu.org/copyleft/gpl.html + */ + ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++ + #include "skeleton.dtsi" + + / { +@@ -125,6 +127,12 @@ + 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <0 123 0x04>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, ++ <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, ++ <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, ++ <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; + clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + status = "disabled"; diff --git a/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch deleted file mode 100644 index a175b1e..0000000 --- a/target/linux/imx6/patches-3.14/200-PCI-imx6-add-support-for-legacy-irqs.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Tim Harvey <tharvey@gateworks.com> -Subject: [PATCH] PCI: imx6: add support for legacy irqs - -The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices -are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the -mapping is reversed from when they are behind a PCIe switch. - -This patch still needs some review and clarification before going -upstream. ---- - drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++- - 1 file changed, 20 insertions(+), 1 deletion(-) - ---- a/drivers/pci/host/pcie-designware.c -+++ b/drivers/pci/host/pcie-designware.c -@@ -739,7 +739,26 @@ static int dw_pcie_map_irq(const struct - { - struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); - -- return pp->irq; -+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */ -+ if ( dev->bus && dev->bus->self -+ && (dev->bus->self->vendor == 0x104c) -+ && (dev->bus->self->device == 0x8240)) { -+ switch (pin) { -+ case 1: return pp->irq - 3; -+ case 2: return pp->irq - 2; -+ case 3: return pp->irq - 1; -+ case 4: return pp->irq; -+ default: return -1; -+ } -+ } else { -+ switch (pin) { -+ case 1: return pp->irq; -+ case 2: return pp->irq - 1; -+ case 3: return pp->irq - 2; -+ case 4: return pp->irq - 3; -+ default: return -1; -+ } -+ } - } - - static void dw_pcie_add_bus(struct pci_bus *bus) |