summaryrefslogtreecommitdiff
path: root/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch')
-rw-r--r--target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch110
1 files changed, 0 insertions, 110 deletions
diff --git a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch b/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
deleted file mode 100644
index b581f78..0000000
--- a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 840202d23892baaff74be11ec71c3ffc6ad6298e Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 20 Jan 2015 08:46:55 -0800
-Subject: [PATCH] ARM: dts: imx6 ventana: Add PCI nodes for on-board PCI
- devices
-
-If the PCI nodes are defined, drivers can access information from the DT.
-For example, the sky2 enet driver can obtain the mac address configured
-from the bootloader (which is applied to the DT node with the ethernet1 alias).
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
- 2 files changed, 72 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -280,8 +280,42 @@
- reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
- status = "okay";
-
-- eth1: sky2@8 { /* MAC/PHY on bus 8 */
-- compatible = "marvell,sky2";
-+ pcie@0,0 {
-+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ pcie@0,0 {
-+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ /*
-+ * GigE PCI dev node needs to be defined so that enet
-+ * driver can use it to obtain its boot-loader
-+ * specified MAC
-+ */
-+ pcie@4,0 {
-+ /* 02:04.0 0604: 10b5:8609: PEX port bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x2000 0 0 0 0>;
-+
-+ eth1: pci@0,0 {
-+ /* 04:00.0 0200: 11ab:4380: GigE */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+ compatible = "marvell,sky2";
-+ };
-+ };
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -369,8 +369,42 @@
- reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
- status = "okay";
-
-- eth1: sky2@8 { /* MAC/PHY on bus 8 */
-- compatible = "marvell,sky2";
-+ pcie@0,0 {
-+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ pcie@0,0 {
-+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ /*
-+ * GigE PCI dev node needs to be defined so that enet
-+ * driver can use it to obtain its boot-loader
-+ * specified MAC
-+ */
-+ pcie@8,0 {
-+ /* 02:08.0 0604: 10b5:8609: PEX port bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x4000 0 0 0 0>;
-+
-+ eth1: pci@0,0 {
-+ /* 08:00.0 0200: 11ab:4380: GigE */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+ compatible = "marvell,sky2";
-+ };
-+ };
-+ };
- };
- };
-