diff options
Diffstat (limited to 'target/linux/imx6/patches-4.4')
2 files changed, 22 insertions, 22 deletions
diff --git a/target/linux/imx6/patches-4.4/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-4.4/202-net-igb-add-i210-i211-support-for-phy-read-write.patch index 6bc23c5..2649f05 100644 --- a/target/linux/imx6/patches-4.4/202-net-igb-add-i210-i211-support-for-phy-read-write.patch +++ b/target/linux/imx6/patches-4.4/202-net-igb-add-i210-i211-support-for-phy-read-write.patch @@ -10,7 +10,7 @@ Date: Thu May 15 00:12:26 2014 -0700 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c -@@ -129,7 +129,7 @@ out: +@@ -133,7 +133,7 @@ out: s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) { struct e1000_phy_info *phy = &hw->phy; @@ -19,7 +19,7 @@ Date: Thu May 15 00:12:26 2014 -0700 s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { -@@ -142,11 +142,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h +@@ -146,11 +146,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -48,7 +48,7 @@ Date: Thu May 15 00:12:26 2014 -0700 /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with -@@ -171,6 +185,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h +@@ -175,6 +189,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h *data = (u16) mdic; out: @@ -67,7 +67,7 @@ Date: Thu May 15 00:12:26 2014 -0700 return ret_val; } -@@ -185,7 +211,7 @@ out: +@@ -189,7 +215,7 @@ out: s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) { struct e1000_phy_info *phy = &hw->phy; @@ -76,7 +76,7 @@ Date: Thu May 15 00:12:26 2014 -0700 s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { -@@ -198,12 +224,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_ +@@ -202,12 +228,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_ * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -108,7 +108,7 @@ Date: Thu May 15 00:12:26 2014 -0700 /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with -@@ -227,6 +268,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_ +@@ -231,6 +272,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_ } out: diff --git a/target/linux/imx6/patches-4.4/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-4.4/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch index 48f6d0d..45a4a8b 100644 --- a/target/linux/imx6/patches-4.4/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch +++ b/target/linux/imx6/patches-4.4/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch @@ -36,7 +36,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c -@@ -126,9 +126,8 @@ out: +@@ -130,9 +130,8 @@ out: * Reads the MDI control regsiter in the PHY at offset and stores the * information read to data. **/ @@ -47,7 +47,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> u32 i, mdicnfg, mdic = 0; s32 ret_val = 0; -@@ -147,14 +146,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h +@@ -151,14 +150,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h case e1000_i211: mdicnfg = rd32(E1000_MDICNFG); mdicnfg &= ~(E1000_MDICNFG_PHY_MASK); @@ -64,7 +64,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> (E1000_MDIC_OP_READ)); break; } -@@ -208,9 +207,8 @@ out: +@@ -212,9 +211,8 @@ out: * * Writes data to MDI control register in the PHY at offset. **/ @@ -75,7 +75,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> u32 i, mdicnfg, mdic = 0; s32 ret_val = 0; -@@ -229,7 +227,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_ +@@ -233,7 +231,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_ case e1000_i211: mdicnfg = rd32(E1000_MDICNFG); mdicnfg &= ~(E1000_MDICNFG_PHY_MASK); @@ -84,7 +84,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> wr32(E1000_MDICNFG, mdicnfg); mdic = (((u32)data) | (offset << E1000_MDIC_REG_SHIFT) | -@@ -238,7 +236,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_ +@@ -242,7 +240,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_ default: mdic = (((u32)data) | (offset << E1000_MDIC_REG_SHIFT) | @@ -93,7 +93,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> (E1000_MDIC_OP_WRITE)); break; } -@@ -458,7 +456,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw +@@ -462,7 +460,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw goto out; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -102,7 +102,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> IGP01E1000_PHY_PAGE_SELECT, (u16)offset); if (ret_val) { -@@ -467,8 +465,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw +@@ -471,8 +469,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw } } @@ -113,7 +113,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> hw->phy.ops.release(hw); -@@ -497,7 +495,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h +@@ -501,7 +499,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h goto out; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -122,7 +122,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> IGP01E1000_PHY_PAGE_SELECT, (u16)offset); if (ret_val) { -@@ -506,8 +504,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h +@@ -510,8 +508,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h } } @@ -133,7 +133,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> hw->phy.ops.release(hw); -@@ -2547,8 +2545,9 @@ out: +@@ -2551,8 +2549,9 @@ out: } /** @@ -144,7 +144,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> * @offset: lower half is register offset to write to * upper half is page to use. * @data: data to write at register offset -@@ -2556,7 +2555,7 @@ out: +@@ -2560,7 +2559,7 @@ out: * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ @@ -153,7 +153,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> { s32 ret_val; u16 page = offset >> GS40G_PAGE_SHIFT; -@@ -2566,10 +2565,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000 +@@ -2570,10 +2569,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000 if (ret_val) return ret_val; @@ -166,7 +166,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> release: hw->phy.ops.release(hw); -@@ -2577,8 +2576,24 @@ release: +@@ -2581,8 +2580,24 @@ release: } /** @@ -192,7 +192,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> * @offset: lower half is register offset to read to * upper half is page to use. * @data: data to read at register offset -@@ -2586,7 +2601,7 @@ release: +@@ -2590,7 +2605,7 @@ release: * Acquires semaphore, if necessary, then reads the data in the PHY register * at the offset. Release any acquired semaphores before exiting. **/ @@ -201,7 +201,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> { s32 ret_val; u16 page = offset >> GS40G_PAGE_SHIFT; -@@ -2596,10 +2611,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_ +@@ -2600,10 +2615,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_ if (ret_val) return ret_val; @@ -214,7 +214,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> release: hw->phy.ops.release(hw); -@@ -2607,6 +2622,21 @@ release: +@@ -2611,6 +2626,21 @@ release: } /** |