summaryrefslogtreecommitdiff
path: root/target/linux/imx6
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/imx6')
-rw-r--r--target/linux/imx6/config-3.18369
-rw-r--r--target/linux/imx6/patches-3.18/100-bootargs.patch11
-rw-r--r--target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch33
-rw-r--r--target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch81
-rw-r--r--target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch129
-rw-r--r--target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch260
-rw-r--r--target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch308
-rw-r--r--target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch27
-rw-r--r--target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch56
-rw-r--r--target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch110
10 files changed, 0 insertions, 1384 deletions
diff --git a/target/linux/imx6/config-3.18 b/target/linux/imx6/config-3.18
deleted file mode 100644
index fcd86d4..0000000
--- a/target/linux/imx6/config-3.18
+++ /dev/null
@@ -1,369 +0,0 @@
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA512_ARM_NEON=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FEC=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_IMX2_WDT=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD=y
-CONFIG_JBD2=y
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-# CONFIG_MXC_DEBUG_BOARD is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_IMX6=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PFUZE100=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-# CONFIG_SOC_IMX6SX is not set
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRAM=y
-CONFIG_STMP_DEVICE=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-# CONFIG_USB_MXS_PHY is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/imx6/patches-3.18/100-bootargs.patch b/target/linux/imx6/patches-3.18/100-bootargs.patch
deleted file mode 100644
index 0954391..0000000
--- a/target/linux/imx6/patches-3.18/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -19,4 +19,8 @@
- memory {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
diff --git a/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch b/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch
deleted file mode 100644
index 75218d2..0000000
--- a/target/linux/imx6/patches-3.18/200-pci_designware_add-ability-for-custom-swizzle.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-commit e84634dc6c7f3f6af9b8ef1fb36f0d85c476ab95
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu Feb 27 01:02:23 2014 -0800
-
- PCI: designware: add ability for custom swizzle
-
- Add the ability for a platform driver to provide a platform-specific
- swizzle function.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -492,6 +492,9 @@ int dw_pcie_host_init(struct pcie_port *
- if (pp->ops->host_init)
- pp->ops->host_init(pp);
-
-+ if (pp->swizzle)
-+ dw_pci.swizzle = pp->swizzle;
-+
- dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
-
- /* program correct class for RC */
---- a/drivers/pci/host/pcie-designware.h
-+++ b/drivers/pci/host/pcie-designware.h
-@@ -53,6 +53,7 @@ struct pcie_port {
- struct irq_domain *irq_domain;
- unsigned long msi_data;
- DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
-+ u8 (*swizzle)(struct pci_dev *, u8 *);
- };
-
- struct pcie_host_ops {
diff --git a/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch b/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
deleted file mode 100644
index 4db1569..0000000
--- a/target/linux/imx6/patches-3.18/201-pci_imx6_ventana_fixup-for-IRQ-mismapping.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-commit 2c0d0491438433a1f327f2e754c7b6b55fec51c4
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu Feb 27 00:59:53 2014 -0800
-
- PCI: imx6: ventana: fixup for IRQ mismapping
-
- The TI XIO2001 PCIe-to-PCI bridge used on several Ventana expansion boards
- has its slot-to-bridge IRQ mapping reversed from the PCI specification:
-
- INTA->INTD
- INTB->INTC
- INTC->INTB
- INTD->INTA
-
- Implement a custom swizzle function that does a fixup on the interrupt for
- devices on a TI XIO2001 bridge.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -553,6 +553,39 @@ static int __init imx6_add_pcie_port(str
- return 0;
- }
-
-+/* TI XIO2001 PCIe-to-PCI bridge on GW16082 exp card has IRQs reversed */
-+u8 ventana_swizzle(struct pci_dev *dev, u8 *pin)
-+{
-+ u8 i = 0;
-+ struct pci_dev *pdev = dev;
-+
-+ /* count number of TI XIO2001 bridges on bus */
-+ while (!pci_is_root_bus(pdev->bus)) {
-+ if (pdev->bus && pdev->bus->self &&
-+ (pdev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+ (pdev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+ i++;
-+ }
-+ pdev = pdev->bus->self;
-+ }
-+ while (!pci_is_root_bus(dev->bus)) {
-+ /* if we are directly downstream from 1st TI XIO2001 bridge */
-+ if (dev->bus && dev->bus->self &&
-+ (dev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
-+ (dev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
-+ if (--i == 0) {
-+ /* swap IRQs and swizzle backwards */
-+ *pin = (15 - PCI_SLOT(dev->devfn)) + 1;
-+ dev = dev->bus->self;
-+ continue;
-+ }
-+ }
-+ *pin = pci_swizzle_interrupt_pin(dev, *pin);
-+ dev = dev->bus->self;
-+ }
-+ return PCI_SLOT(dev->devfn);
-+}
-+
- static int __init imx6_pcie_probe(struct platform_device *pdev)
- {
- struct imx6_pcie *imx6_pcie;
-@@ -618,6 +651,9 @@ static int __init imx6_pcie_probe(struct
- return PTR_ERR(imx6_pcie->iomuxc_gpr);
- }
-
-+ if (of_machine_is_compatible("gw,ventana"))
-+ pp->swizzle = ventana_swizzle;
-+
- ret = imx6_add_pcie_port(pp, pdev);
- if (ret < 0)
- return ret;
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -827,6 +827,7 @@
- #define PCI_DEVICE_ID_TI_XX12 0x8039
- #define PCI_DEVICE_ID_TI_XX12_FM 0x803b
- #define PCI_DEVICE_ID_TI_XIO2000A 0x8231
-+#define PCI_DEVICE_ID_TI_XIO2001 0x8240
- #define PCI_DEVICE_ID_TI_1130 0xac12
- #define PCI_DEVICE_ID_TI_1031 0xac13
- #define PCI_DEVICE_ID_TI_1131 0xac15
diff --git a/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
deleted file mode 100644
index fb4b722..0000000
--- a/target/linux/imx6/patches-3.18/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-Author: Tim Harvey <tharvey@gateworks.com>
-Date: Thu May 15 00:12:26 2014 -0700
-
- net: igb: add i210/i211 support for phy read/write
-
- The i210/i211 uses the MDICNFG register for the phy address instead of the
- MDIC register.
-
- Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -135,7 +135,7 @@ out:
- s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
- {
- struct e1000_phy_info *phy = &hw->phy;
-- u32 i, mdic = 0;
-+ u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
-- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-- (E1000_MDIC_OP_READ));
-+ switch (hw->mac.type) {
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+ (E1000_MDIC_OP_READ));
-+ break;
-+ default:
-+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (E1000_MDIC_OP_READ));
-+ break;
-+ }
-
- wr32(E1000_MDIC, mdic);
-+ wrfl();
-
- /* Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
-@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- *data = (u16) mdic;
-
- out:
-+ switch (hw->mac.type) {
-+ /* restore MDICNFG to have phy's addr */
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ break;
-+ default:
-+ break;
-+ }
- return ret_val;
- }
-
-@@ -191,7 +217,7 @@ out:
- s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
- {
- struct e1000_phy_info *phy = &hw->phy;
-- u32 i, mdic = 0;
-+ u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
-- mdic = (((u32)data) |
-- (offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-- (E1000_MDIC_OP_WRITE));
-+ switch (hw->mac.type) {
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ mdic = (((u32)data) |
-+ (offset << E1000_MDIC_REG_SHIFT) |
-+ (E1000_MDIC_OP_WRITE));
-+ break;
-+ default:
-+ mdic = (((u32)data) |
-+ (offset << E1000_MDIC_REG_SHIFT) |
-+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (E1000_MDIC_OP_WRITE));
-+ break;
-+ }
-
- wr32(E1000_MDIC, mdic);
-+ wrfl();
-
- /* Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
-@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- }
-
- out:
-+ switch (hw->mac.type) {
-+ /* restore MDICNFG to have phy's addr */
-+ case e1000_i210:
-+ case e1000_i211:
-+ mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
-+ wr32(E1000_MDICNFG, mdicnfg);
-+ break;
-+ default:
-+ break;
-+ }
- return ret_val;
- }
-
diff --git a/target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
deleted file mode 100644
index 7869b1c..0000000
--- a/target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
+++ /dev/null
@@ -1,260 +0,0 @@
-From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 15 May 2014 00:29:18 -0700
-Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
-
-Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
-The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
-to this function.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +-
- drivers/net/ethernet/intel/igb/e1000_phy.c | 74 +++++++++++++++++++---------
- drivers/net/ethernet/intel/igb/e1000_phy.h | 6 ++-
- 3 files changed, 58 insertions(+), 26 deletions(-)
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -2129,7 +2129,7 @@ static s32 igb_read_phy_reg_82580(struct
- if (ret_val)
- goto out;
-
-- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -2154,7 +2154,7 @@ static s32 igb_write_phy_reg_82580(struc
- if (ret_val)
- goto out;
-
-- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
-
- hw->phy.ops.release(hw);
-
---- a/drivers/net/ethernet/intel/igb/e1000_phy.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
-@@ -132,9 +132,8 @@ out:
- * Reads the MDI control regsiter in the PHY at offset and stores the
- * information read to data.
- **/
--s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
-- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
-@@ -153,14 +152,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
- case e1000_i211:
- mdicnfg = rd32(E1000_MDICNFG);
- mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (E1000_MDIC_OP_READ));
- break;
- default:
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
- break;
- }
-@@ -214,9 +213,8 @@ out:
- *
- * Writes data to MDI control register in the PHY at offset.
- **/
--s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
-- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdicnfg, mdic = 0;
- s32 ret_val = 0;
-
-@@ -235,7 +233,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- case e1000_i211:
- mdicnfg = rd32(E1000_MDICNFG);
- mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
-- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
-+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
- wr32(E1000_MDICNFG, mdicnfg);
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
-@@ -244,7 +242,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
- default:
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
-- (phy->addr << E1000_MDIC_PHY_SHIFT) |
-+ (addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
- break;
- }
-@@ -464,7 +462,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
-- ret_val = igb_write_phy_reg_mdic(hw,
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
-@@ -473,8 +471,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
- }
- }
-
-- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-- data);
-+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
-+ MAX_PHY_REG_ADDRESS & offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -503,7 +501,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
-- ret_val = igb_write_phy_reg_mdic(hw,
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
-@@ -512,8 +510,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
- }
- }
-
-- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-- data);
-+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
-+ MAX_PHY_REG_ADDRESS & offset, data);
-
- hw->phy.ops.release(hw);
-
-@@ -2464,8 +2462,9 @@ out:
- }
-
- /**
-- * igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ * igb_write_reg_gs40g - Write GS40G PHY register
- * @hw: pointer to the HW structure
-+ * @addr: phy address to write to
- * @offset: lower half is register offset to write to
- * upper half is page to use.
- * @data: data to write at register offset
-@@ -2473,7 +2472,7 @@ out:
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
--s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
- {
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2483,10 +2482,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
- if (ret_val)
- return ret_val;
-
-- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
-- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
-
- release:
- hw->phy.ops.release(hw);
-@@ -2494,8 +2493,24 @@ release:
- }
-
- /**
-- * igb_read_phy_reg_gs40g - Read GS40G PHY register
-+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
-+ * @hw: pointer to the HW structure
-+ * @offset: lower half is register offset to write to
-+ * upper half is page to use.
-+ * @data: data to write at register offset
-+ *
-+ * Acquires semaphore, if necessary, then writes the data to PHY register
-+ * at the offset. Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-+{
-+ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
-+ * igb_read_reg_gs40g - Read GS40G PHY register
- * @hw: pointer to the HW structure
-+ * @addr: phy address to read from
- * @offset: lower half is register offset to read to
- * upper half is page to use.
- * @data: data to read at register offset
-@@ -2503,7 +2518,7 @@ release:
- * Acquires semaphore, if necessary, then reads the data in the PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
--s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
- {
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2513,10 +2528,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
- if (ret_val)
- return ret_val;
-
-- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
-- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-+ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
-
- release:
- hw->phy.ops.release(hw);
-@@ -2524,6 +2539,21 @@ release:
- }
-
- /**
-+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
-+ * @hw: pointer to the HW structure
-+ * @offset: lower half is register offset to read to
-+ * upper half is page to use.
-+ * @data: data to read at register offset
-+ *
-+ * Acquires semaphore, if necessary, then reads the data in the PHY register
-+ * at the offset. Release any acquired semaphores before exiting.
-+ **/
-+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-+{
-+ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
-+}
-+
-+/**
- * igb_set_master_slave_mode - Setup PHY for Master/slave mode
- * @hw: pointer to the HW structure
- *
---- a/drivers/net/ethernet/intel/igb/e1000_phy.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
-@@ -61,8 +61,8 @@ s32 igb_phy_has_link(struct e1000_hw *h
- void igb_power_up_phy_copper(struct e1000_hw *hw);
- void igb_power_down_phy_copper(struct e1000_hw *hw);
- s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
--s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
--s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
- s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
- s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
-@@ -72,6 +72,8 @@ s32 igb_phy_force_speed_duplex_82580(st
- s32 igb_get_cable_length_82580(struct e1000_hw *hw);
- s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
- s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
-+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
-+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
- s32 igb_check_polarity_m88(struct e1000_hw *hw);
-
- /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
deleted file mode 100644
index 129a0bc..0000000
--- a/target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
+++ /dev/null
@@ -1,308 +0,0 @@
-From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 15 May 2014 12:36:23 -0700
-Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
-
-If an i210 is configured for 1000BASE-BX link_mode and has an external phy
-specified, then register an mii bus using the external phy address as
-a mask.
-
-An i210 hooked to an external standard phy will be configured with a link_mo
-of SGMII in which case phy ops will be configured and used internall in the
-igb driver for link status. However, in certain cases one might be using a
-backplane SerDes connection to something that talks on the mdio bus but is
-not a standard phy, such as a switch. In this case by registering an mdio
-bus a phy driver can manage the device.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
- drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
- drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
- 3 files changed, 185 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/intel/igb/e1000_82575.c
-+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
-@@ -598,13 +598,25 @@ static s32 igb_get_invariants_82575(stru
- switch (link_mode) {
- case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- hw->phy.media_type = e1000_media_type_internal_serdes;
-+ if (igb_sgmii_uses_mdio_82575(hw)) {
-+ u32 mdicnfg = rd32(E1000_MDICNFG);
-+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
-+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
-+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
-+ hw->phy.addr);
-+ } else {
-+ hw_dbg("1000BASE_KX");
-+ }
- break;
- case E1000_CTRL_EXT_LINK_MODE_SGMII:
- /* Get phy control interface type set (MDIO vs. I2C)*/
- if (igb_sgmii_uses_mdio_82575(hw)) {
- hw->phy.media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = true;
-+ hw_dbg("SGMII with external MDIO PHY");
- break;
-+ } else {
-+ hw_dbg("SGMII with external I2C PHY");
- }
- /* fall through for I2C based SGMII */
- case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
-@@ -621,8 +633,11 @@ static s32 igb_get_invariants_82575(stru
- hw->phy.media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = true;
- }
-+ hw_dbg("SERDES with external SFP");
-
- break;
-+ } else {
-+ hw_dbg("SERDES");
- }
-
- /* do not change link mode for 100BaseFX */
---- a/drivers/net/ethernet/intel/igb/e1000_hw.h
-+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
-@@ -27,6 +27,7 @@
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/netdevice.h>
-+#include <linux/phy.h>
-
- #include "e1000_regs.h"
- #include "e1000_defines.h"
-@@ -543,6 +544,12 @@ struct e1000_hw {
- struct e1000_mbx_info mbx;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
-
-+#ifdef CONFIG_PHYLIB
-+ /* Phylib and MDIO interface */
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy_dev;
-+ phy_interface_t phy_interface;
-+#endif
- union {
- struct e1000_dev_spec_82575 _82575;
- } dev_spec;
---- a/drivers/net/ethernet/intel/igb/igb_main.c
-+++ b/drivers/net/ethernet/intel/igb/igb_main.c
-@@ -41,6 +41,7 @@
- #include <linux/if_vlan.h>
- #include <linux/pci.h>
- #include <linux/pci-aspm.h>
-+#include <linux/phy.h>
- #include <linux/delay.h>
- #include <linux/interrupt.h>
- #include <linux/ip.h>
-@@ -2237,6 +2238,126 @@ static s32 igb_init_i2c(struct igb_adapt
- return status;
- }
-
-+
-+#ifdef CONFIG_PHYLIB
-+/*
-+ * MMIO/PHYdev support
-+ */
-+
-+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+ struct e1000_hw *hw = bus->priv;
-+ u16 out;
-+ int err;
-+
-+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
-+ if (err)
-+ return err;
-+ return out;
-+}
-+
-+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+ u16 val)
-+{
-+ struct e1000_hw *hw = bus->priv;
-+
-+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
-+}
-+
-+static int igb_enet_mdio_reset(struct mii_bus *bus)
-+{
-+ udelay(300);
-+ return 0;
-+}
-+
-+static void igb_enet_mii_link(struct net_device *netdev)
-+{
-+}
-+
-+/* Probe the mdio bus for phys and connect them */
-+static int igb_enet_mii_probe(struct net_device *netdev)
-+{
-+ struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ struct phy_device *phy_dev = NULL;
-+ int phy_id;
-+
-+ /* check for attached phy */
-+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
-+ if (hw->mii_bus->phy_map[phy_id]) {
-+ phy_dev = hw->mii_bus->phy_map[phy_id];
-+ break;
-+ }
-+ }
-+ if (!phy_dev) {
-+ netdev_err(netdev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
-+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
-+ igb_enet_mii_link, hw->phy_interface);
-+ if (IS_ERR(phy_dev)) {
-+ netdev_err(netdev, "could not attach to PHY\n");
-+ return PTR_ERR(phy_dev);
-+ }
-+
-+ hw->phy_dev = phy_dev;
-+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
-+
-+ return 0;
-+}
-+
-+/* Create and register mdio bus */
-+static int igb_enet_mii_init(struct pci_dev *pdev)
-+{
-+ struct mii_bus *mii_bus;
-+ struct net_device *netdev = pci_get_drvdata(pdev);
-+ struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
-+ int err;
-+
-+ mii_bus = mdiobus_alloc();
-+ if (mii_bus == NULL) {
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ mii_bus->name = "igb_enet_mii_bus";
-+ mii_bus->read = igb_enet_mdio_read;
-+ mii_bus->write = igb_enet_mdio_write;
-+ mii_bus->reset = igb_enet_mdio_reset;
-+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-+ pci_name(pdev), hw->device_id + 1);
-+ mii_bus->priv = hw;
-+ mii_bus->parent = &pdev->dev;
-+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
-+
-+ err = mdiobus_register(mii_bus);
-+ if (err) {
-+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
-+ goto err_out_free_mdiobus;
-+ }
-+ hw->mii_bus = mii_bus;
-+
-+ return 0;
-+
-+err_out_free_mdiobus:
-+ mdiobus_free(mii_bus);
-+err_out:
-+ return err;
-+}
-+
-+static void igb_enet_mii_remove(struct e1000_hw *hw)
-+{
-+ if (hw->mii_bus) {
-+ mdiobus_unregister(hw->mii_bus);
-+ mdiobus_free(hw->mii_bus);
-+ }
-+}
-+#endif /* CONFIG_PHYLIB */
-+
- /**
- * igb_probe - Device Initialization Routine
- * @pdev: PCI device information struct
-@@ -2659,6 +2780,13 @@ static int igb_probe(struct pci_dev *pde
- }
- }
- pm_runtime_put_noidle(&pdev->dev);
-+
-+#ifdef CONFIG_PHYLIB
-+ /* create and register the mdio bus if using ext phy */
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_init(pdev);
-+#endif
-+
- return 0;
-
- err_register:
-@@ -2802,6 +2930,10 @@ static void igb_remove(struct pci_dev *p
- struct e1000_hw *hw = &adapter->hw;
-
- pm_runtime_get_noresume(&pdev->dev);
-+#ifdef CONFIG_PHYLIB
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_remove(hw);
-+#endif
- #ifdef CONFIG_IGB_HWMON
- igb_sysfs_exit(adapter);
- #endif
-@@ -3115,6 +3247,12 @@ static int __igb_open(struct net_device
- if (!resuming)
- pm_runtime_put(&pdev->dev);
-
-+#ifdef CONFIG_PHYLIB
-+ /* Probe and connect to PHY if using ext phy */
-+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
-+ igb_enet_mii_probe(netdev);
-+#endif
-+
- /* start the watchdog. */
- hw->mac.get_link_status = 1;
- schedule_work(&adapter->watchdog_task);
-@@ -7111,21 +7249,41 @@ void igb_alloc_rx_buffers(struct igb_rin
- static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
- {
- struct igb_adapter *adapter = netdev_priv(netdev);
-+ struct e1000_hw *hw = &adapter->hw;
- struct mii_ioctl_data *data = if_mii(ifr);
-
-- if (adapter->hw.phy.media_type != e1000_media_type_copper)
-+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
-+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
-- data->phy_id = adapter->hw.phy.addr;
-+ data->phy_id = hw->phy.addr;
- break;
- case SIOCGMIIREG:
-- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-- &data->val_out))
-- return -EIO;
-+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
-+ data->reg_num & 0x1F,
-+ &data->val_out))
-+ return -EIO;
-+ } else {
-+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
-+ &data->val_out))
-+ return -EIO;
-+ }
- break;
- case SIOCSMIIREG:
-+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
-+ if (igb_write_reg_gs40g(hw, data->phy_id,
-+ data->reg_num & 0x1F,
-+ data->val_in))
-+ return -EIO;
-+ } else {
-+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
-+ data->val_in))
-+ return -EIO;
-+ }
-+ break;
- default:
- return -EOPNOTSUPP;
- }
diff --git a/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
deleted file mode 100644
index e991fad..0000000
--- a/target/linux/imx6/patches-3.18/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -292,6 +292,14 @@ endif # RTL8366_SMI
-
- source "drivers/net/phy/b53/Kconfig"
-
-+config GATEWORKS_GW16083
-+ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
-+ ---help---
-+ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
-+ Gateworks Ventana baseboard and provides a 7-port GbE managed
-+ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
-+ ports"
-+
- endif # PHYLIB
-
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
- obj-$(CONFIG_DP83640_PHY) += dp83640.o
- obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
-+obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
diff --git a/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
deleted file mode 100644
index 6f31f95..0000000
--- a/target/linux/imx6/patches-3.18/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -89,6 +89,11 @@
- enable-active-high;
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &fec {
---- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -266,6 +266,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &pcie {
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -267,6 +267,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &pcie {
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -308,6 +308,11 @@
- };
- };
- };
-+
-+ gw16083: gw16083@52 {
-+ compatible = "gateworks,gw16083";
-+ reg = <0x52>;
-+ };
- };
-
- &i2c3 {
diff --git a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch b/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
deleted file mode 100644
index b581f78..0000000
--- a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From 840202d23892baaff74be11ec71c3ffc6ad6298e Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 20 Jan 2015 08:46:55 -0800
-Subject: [PATCH] ARM: dts: imx6 ventana: Add PCI nodes for on-board PCI
- devices
-
-If the PCI nodes are defined, drivers can access information from the DT.
-For example, the sky2 enet driver can obtain the mac address configured
-from the bootloader (which is applied to the DT node with the ethernet1 alias).
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
- 2 files changed, 72 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -280,8 +280,42 @@
- reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
- status = "okay";
-
-- eth1: sky2@8 { /* MAC/PHY on bus 8 */
-- compatible = "marvell,sky2";
-+ pcie@0,0 {
-+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ pcie@0,0 {
-+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ /*
-+ * GigE PCI dev node needs to be defined so that enet
-+ * driver can use it to obtain its boot-loader
-+ * specified MAC
-+ */
-+ pcie@4,0 {
-+ /* 02:04.0 0604: 10b5:8609: PEX port bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x2000 0 0 0 0>;
-+
-+ eth1: pci@0,0 {
-+ /* 04:00.0 0200: 11ab:4380: GigE */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+ compatible = "marvell,sky2";
-+ };
-+ };
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -369,8 +369,42 @@
- reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
- status = "okay";
-
-- eth1: sky2@8 { /* MAC/PHY on bus 8 */
-- compatible = "marvell,sky2";
-+ pcie@0,0 {
-+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ pcie@0,0 {
-+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+
-+ /*
-+ * GigE PCI dev node needs to be defined so that enet
-+ * driver can use it to obtain its boot-loader
-+ * specified MAC
-+ */
-+ pcie@8,0 {
-+ /* 02:08.0 0604: 10b5:8609: PEX port bridge */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x4000 0 0 0 0>;
-+
-+ eth1: pci@0,0 {
-+ /* 08:00.0 0200: 11ab:4380: GigE */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ reg = <0x0 0 0 0 0>;
-+ compatible = "marvell,sky2";
-+ };
-+ };
-+ };
- };
- };
-