diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch')
-rw-r--r-- | target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch | 435 |
1 files changed, 435 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch new file mode 100644 index 0000000..59fc44f --- /dev/null +++ b/target/linux/ipq806x/patches-4.1/142-clk-qcom-Add-Krait-clock-controller-driver.patch @@ -0,0 +1,435 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v3,11/13] clk: qcom: Add Krait clock controller driver +From: Stephen Boyd <sboyd@codeaurora.org> +X-Patchwork-Id: 6063121 +Message-Id: <1426920332-9340-12-git-send-email-sboyd@codeaurora.org> +To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org> +Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, + linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, + Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org> +Date: Fri, 20 Mar 2015 23:45:30 -0700 + +The Krait CPU clocks are made up of a primary mux and secondary +mux for each CPU and the L2, controlled via cp15 accessors. For +Kraits within KPSSv1 each secondary mux accepts a different aux +source, but on KPSSv2 each secondary mux accepts the same aux +source. + +Cc: <devicetree@vger.kernel.org> +Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> + +--- +.../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++ + drivers/clk/qcom/Kconfig | 8 + + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/krait-cc.c | 352 +++++++++++++++++++++ + 4 files changed, 383 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt + create mode 100644 drivers/clk/qcom/krait-cc.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt +@@ -0,0 +1,22 @@ ++Krait Clock Controller ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: <string> ++ Definition: must be one of: ++ "qcom,krait-cc-v1" ++ "qcom,krait-cc-v2" ++ ++- #clock-cells: ++ Usage: required ++ Value type: <u32> ++ Definition: must be 1 ++ ++Example: ++ ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ #clock-cells = <1>; ++ }; +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -114,6 +114,14 @@ config KPSS_XCC + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + ++config KRAITCC ++ tristate "Krait Clock Controller" ++ depends on COMMON_CLK_QCOM && ARM ++ select KRAIT_CLOCKS ++ help ++ Support for the Krait CPU clocks on Qualcomm devices. ++ Say Y if you want to support CPU frequency scaling. ++ + config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -25,3 +25,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8 + obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o + obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o ++obj-$(CONFIG_KRAITCC) += krait-cc.o +--- /dev/null ++++ b/drivers/clk/qcom/krait-cc.c +@@ -0,0 +1,352 @@ ++/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/clk-provider.h> ++#include <linux/slab.h> ++ ++#include "clk-krait.h" ++ ++static unsigned int sec_mux_map[] = { ++ 2, ++ 0, ++}; ++ ++static unsigned int pri_mux_map[] = { ++ 1, ++ 2, ++ 0, ++}; ++ ++static int ++krait_add_div(struct device *dev, int id, const char *s, unsigned offset) ++{ ++ struct krait_div2_clk *div; ++ struct clk_init_data init = { ++ .num_parents = 1, ++ .ops = &krait_div2_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ const char *p_names[1]; ++ struct clk *clk; ++ ++ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); ++ if (!div) ++ return -ENOMEM; ++ ++ div->width = 2; ++ div->shift = 6; ++ div->lpl = id >= 0; ++ div->offset = offset; ++ div->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ init.parent_names = p_names; ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ kfree(init.name); ++ return -ENOMEM; ++ } ++ ++ clk = devm_clk_register(dev, &div->hw); ++ kfree(p_names[0]); ++ kfree(init.name); ++ ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static int ++krait_add_sec_mux(struct device *dev, int id, const char *s, unsigned offset, ++ bool unique_aux) ++{ ++ struct krait_mux_clk *mux; ++ static const char *sec_mux_list[] = { ++ "acpu_aux", ++ "qsb", ++ }; ++ struct clk_init_data init = { ++ .parent_names = sec_mux_list, ++ .num_parents = ARRAY_SIZE(sec_mux_list), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return -ENOMEM; ++ ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->has_safe_parent = true; ++ mux->safe_sel = 2; ++ mux->mask = 0x3; ++ mux->shift = 2; ++ mux->parent_map = sec_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ if (unique_aux) { ++ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); ++ if (!sec_mux_list[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_aux; ++ } ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ if (unique_aux) ++ kfree(sec_mux_list[0]); ++err_aux: ++ kfree(init.name); ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static struct clk * ++krait_add_pri_mux(struct device *dev, int id, const char *s, unsigned offset) ++{ ++ struct krait_mux_clk *mux; ++ const char *p_names[3]; ++ struct clk_init_data init = { ++ .parent_names = p_names, ++ .num_parents = ARRAY_SIZE(p_names), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return ERR_PTR(-ENOMEM); ++ ++ mux->has_safe_parent = true; ++ mux->safe_sel = 0; ++ mux->mask = 0x3; ++ mux->shift = 0; ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->parent_map = pri_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); ++ if (!init.name) ++ return ERR_PTR(-ENOMEM); ++ ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p0; ++ } ++ ++ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!p_names[1]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p1; ++ } ++ ++ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!p_names[2]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p2; ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ kfree(p_names[2]); ++err_p2: ++ kfree(p_names[1]); ++err_p1: ++ kfree(p_names[0]); ++err_p0: ++ kfree(init.name); ++ return clk; ++} ++ ++/* id < 0 for L2, otherwise id == physical CPU number */ ++static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) ++{ ++ int ret; ++ unsigned offset; ++ void *p = NULL; ++ const char *s; ++ struct clk *clk; ++ ++ if (id >= 0) { ++ offset = 0x4501 + (0x1000 * id); ++ s = p = kasprintf(GFP_KERNEL, "%d", id); ++ if (!s) ++ return ERR_PTR(-ENOMEM); ++ } else { ++ offset = 0x500; ++ s = "_l2"; ++ } ++ ++ ret = krait_add_div(dev, id, s, offset); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ clk = krait_add_pri_mux(dev, id, s, offset); ++err: ++ kfree(p); ++ return clk; ++} ++ ++static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) ++{ ++ unsigned int idx = clkspec->args[0]; ++ struct clk **clks = data; ++ ++ if (idx >= 5) { ++ pr_err("%s: invalid clock index %d\n", __func__, idx); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ return clks[idx] ? : ERR_PTR(-ENODEV); ++} ++ ++static const struct of_device_id krait_cc_match_table[] = { ++ { .compatible = "qcom,krait-cc-v1", (void *)1UL }, ++ { .compatible = "qcom,krait-cc-v2" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, krait_cc_match_table); ++ ++static int krait_cc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *id; ++ unsigned long cur_rate, aux_rate; ++ int cpu; ++ struct clk *clk; ++ struct clk **clks; ++ struct clk *l2_pri_mux_clk; ++ ++ id = of_match_device(krait_cc_match_table, dev); ++ if (!id) ++ return -ENODEV; ++ ++ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, CLK_IS_ROOT, 1); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ if (!id->data) { ++ clk = clk_register_fixed_factor(dev, "acpu_aux", ++ "gpll0_vote", 0, 1, 2); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ } ++ ++ /* Krait configurations have at most 4 CPUs and one L2 */ ++ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); ++ if (!clks) ++ return -ENOMEM; ++ ++ for_each_possible_cpu(cpu) { ++ clk = krait_add_clks(dev, cpu, id->data); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ clks[cpu] = clk; ++ } ++ ++ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); ++ if (IS_ERR(l2_pri_mux_clk)) ++ return PTR_ERR(l2_pri_mux_clk); ++ clks[4] = l2_pri_mux_clk; ++ ++ /* ++ * We don't want the CPU or L2 clocks to be turned off at late init ++ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the ++ * refcount of these clocks. Any cpufreq/hotplug manager can assume ++ * that the clocks have already been prepared and enabled by the time ++ * they take over. ++ */ ++ for_each_online_cpu(cpu) { ++ clk_prepare_enable(l2_pri_mux_clk); ++ WARN(clk_prepare_enable(clks[cpu]), ++ "Unable to turn on CPU%d clock", cpu); ++ } ++ ++ /* ++ * Force reinit of HFPLLs and muxes to overwrite any potential ++ * incorrect configuration of HFPLLs and muxes by the bootloader. ++ * While at it, also make sure the cores are running at known rates ++ * and print the current rate. ++ * ++ * The clocks are set to aux clock rate first to make sure the ++ * secondary mux is not sourcing off of QSB. The rate is then set to ++ * two different rates to force a HFPLL reinit under all ++ * circumstances. ++ */ ++ cur_rate = clk_get_rate(l2_pri_mux_clk); ++ aux_rate = 384000000; ++ if (cur_rate == 1) { ++ pr_info("L2 @ QSB rate. Forcing new rate.\n"); ++ cur_rate = aux_rate; ++ } ++ clk_set_rate(l2_pri_mux_clk, aux_rate); ++ clk_set_rate(l2_pri_mux_clk, 2); ++ clk_set_rate(l2_pri_mux_clk, cur_rate); ++ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); ++ for_each_possible_cpu(cpu) { ++ clk = clks[cpu]; ++ cur_rate = clk_get_rate(clk); ++ if (cur_rate == 1) { ++ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); ++ cur_rate = aux_rate; ++ } ++ clk_set_rate(clk, aux_rate); ++ clk_set_rate(clk, 2); ++ clk_set_rate(clk, cur_rate); ++ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ } ++ ++ of_clk_add_provider(dev->of_node, krait_of_get, clks); ++ ++ return 0; ++} ++ ++static struct platform_driver krait_cc_driver = { ++ .probe = krait_cc_probe, ++ .driver = { ++ .name = "krait-cc", ++ .of_match_table = krait_cc_match_table, ++ }, ++}; ++module_platform_driver(krait_cc_driver); ++ ++MODULE_DESCRIPTION("Krait CPU Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:krait-cc"); |