diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch | 407 |
1 files changed, 407 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch b/target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch new file mode 100644 index 0000000..7fd72be --- /dev/null +++ b/target/linux/ipq806x/patches-4.1/704-stmmac-add-ipq806x-glue-layer.patch @@ -0,0 +1,407 @@ +From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Fri, 8 May 2015 16:10:22 -0700 +Subject: [PATCH 4/8] stmmac: add ipq806x glue layer + +The ethernet controller available in IPQ806x is a Synopsys DesignWare +Gigabit MAC IP core, already supported by the stmmac driver. + +This glue layer implements some platform specific settings required to +get the controller working on an IPQ806x based platform. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 + + drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +- + drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c | 324 +++++++++++++++++++++ + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + + .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 + + 5 files changed, 328 insertions(+), 1 deletion(-) + create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c + +--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig ++++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig +@@ -16,6 +16,7 @@ if STMMAC_ETH + config STMMAC_PLATFORM + tristate "STMMAC Platform bus support" + depends on STMMAC_ETH ++ select MFD_SYSCON + default y + ---help--- + This selects the platform specific bus support for the stmmac driver. +--- a/drivers/net/ethernet/stmicro/stmmac/Makefile ++++ b/drivers/net/ethernet/stmicro/stmmac/Makefile +@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethto + + obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o + stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \ +- dwmac-sti.o dwmac-socfpga.o dwmac-rk.o ++ dwmac-sti.o dwmac-socfpga.o dwmac-rk.o dwmac-ipq806x.o + + obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o + stmmac-pci-objs:= stmmac_pci.o +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +@@ -43,6 +43,7 @@ static const struct of_device_id stmmac_ + { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data}, + { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data}, + { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data }, ++ { .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data }, + { .compatible = "st,spear600-gmac"}, + { .compatible = "snps,dwmac-3.610"}, + { .compatible = "snps,dwmac-3.70a"}, +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h +@@ -25,5 +25,6 @@ extern const struct stmmac_of_data stih4 + extern const struct stmmac_of_data stid127_dwmac_data; + extern const struct stmmac_of_data socfpga_gmac_data; + extern const struct stmmac_of_data rk3288_gmac_data; ++extern const struct stmmac_of_data ipq806x_gmac_data; + + #endif /* __STMMAC_PLATFORM_H__ */ +--- /dev/null ++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +@@ -0,0 +1,343 @@ ++/* ++ * Qualcomm Atheros IPQ806x GMAC glue layer ++ * ++ * Copyright (C) 2015 The Linux Foundation ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/phy.h> ++#include <linux/regmap.h> ++#include <linux/clk.h> ++#include <linux/reset.h> ++#include <linux/of_net.h> ++#include <linux/mfd/syscon.h> ++#include <linux/stmmac.h> ++#include <linux/of_mdio.h> ++ ++#include "stmmac_platform.h" ++ ++#define NSS_COMMON_CLK_GATE 0x8 ++#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x) ++#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2)) ++#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2)) ++#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x) ++#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x) ++ ++#define NSS_COMMON_CLK_DIV0 0xC ++#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8) ++#define NSS_COMMON_CLK_DIV_MASK 0x7f ++ ++#define NSS_COMMON_CLK_SRC_CTRL 0x14 ++#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (1 << x) ++/* Mode is coded on 1 bit but is different depending on the MAC ID: ++ * MAC0: QSGMII=0 RGMII=1 ++ * MAC1: QSGMII=0 SGMII=0 RGMII=1 ++ * MAC2 & MAC3: QSGMII=0 SGMII=1 ++ */ ++#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1 ++#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0) ++ ++#define NSS_COMMON_MACSEC_CTL 0x28 ++#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x) (1 << x) ++ ++#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4)) ++#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19) ++#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16) ++#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8 ++#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0 ++#define NSS_COMMON_GMAC_CTL_IFG_MASK 0x3f ++ ++#define NSS_COMMON_CLK_DIV_RGMII_1000 1 ++#define NSS_COMMON_CLK_DIV_RGMII_100 9 ++#define NSS_COMMON_CLK_DIV_RGMII_10 99 ++#define NSS_COMMON_CLK_DIV_SGMII_1000 0 ++#define NSS_COMMON_CLK_DIV_SGMII_100 4 ++#define NSS_COMMON_CLK_DIV_SGMII_10 49 ++ ++#define QSGMII_PCS_MODE_CTL 0x68 ++#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x) BIT((x * 8) + 7) ++ ++#define QSGMII_PCS_CAL_LCKDT_CTL 0x120 ++#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19) ++ ++/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */ ++#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \ ++ (0x13c + (4 * (x - 2)))) ++#define QSGMII_PHY_CDR_EN BIT(0) ++#define QSGMII_PHY_RX_FRONT_EN BIT(1) ++#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2) ++#define QSGMII_PHY_TX_DRIVER_EN BIT(3) ++#define QSGMII_PHY_QSGMII_EN BIT(7) ++#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12 ++#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK 0x7 ++#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18 ++#define QSGMII_PHY_RX_DC_BIAS_MASK 0x3 ++#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20 ++#define QSGMII_PHY_RX_INPUT_EQU_MASK 0x3 ++#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22 ++#define QSGMII_PHY_CDR_PI_SLEW_MASK 0x3 ++#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28 ++#define QSGMII_PHY_TX_DRV_AMP_MASK 0xf ++ ++struct ipq806x_gmac { ++ struct platform_device *pdev; ++ struct regmap *nss_common; ++ struct regmap *qsgmii_csr; ++ uint32_t id; ++ struct clk *core_clk; ++ phy_interface_t phy_mode; ++}; ++ ++static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed) ++{ ++ struct device *dev = &gmac->pdev->dev; ++ int div; ++ ++ switch (speed) { ++ case SPEED_1000: ++ div = NSS_COMMON_CLK_DIV_SGMII_1000; ++ break; ++ ++ case SPEED_100: ++ div = NSS_COMMON_CLK_DIV_SGMII_100; ++ break; ++ ++ case SPEED_10: ++ div = NSS_COMMON_CLK_DIV_SGMII_10; ++ break; ++ ++ default: ++ dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed); ++ return -EINVAL; ++ } ++ ++ return div; ++} ++ ++static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed) ++{ ++ struct device *dev = &gmac->pdev->dev; ++ int div; ++ ++ switch (speed) { ++ case SPEED_1000: ++ div = NSS_COMMON_CLK_DIV_RGMII_1000; ++ break; ++ ++ case SPEED_100: ++ div = NSS_COMMON_CLK_DIV_RGMII_100; ++ break; ++ ++ case SPEED_10: ++ div = NSS_COMMON_CLK_DIV_RGMII_10; ++ break; ++ ++ default: ++ dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed); ++ return -EINVAL; ++ } ++ ++ return div; ++} ++ ++static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed) ++{ ++ uint32_t clk_bits, val; ++ int div; ++ ++ switch (gmac->phy_mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ div = get_clk_div_rgmii(gmac, speed); ++ clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | ++ NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); ++ break; ++ ++ case PHY_INTERFACE_MODE_SGMII: ++ div = get_clk_div_sgmii(gmac, speed); ++ clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | ++ NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); ++ break; ++ ++ default: ++ dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n", ++ phy_modes(gmac->phy_mode)); ++ return -EINVAL; ++ } ++ ++ /* Disable the clocks */ ++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); ++ val &= ~clk_bits; ++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); ++ ++ /* Set the divider */ ++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val); ++ val &= ~(NSS_COMMON_CLK_DIV_MASK ++ << NSS_COMMON_CLK_DIV_OFFSET(gmac->id)); ++ val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id); ++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val); ++ ++ /* Enable the clock back */ ++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); ++ val |= clk_bits; ++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); ++ ++ return 0; ++} ++ ++static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac) ++{ ++ struct device *dev = &gmac->pdev->dev; ++ ++ gmac->phy_mode = of_get_phy_mode(dev->of_node); ++ if (gmac->phy_mode < 0) { ++ dev_err(dev, "missing phy mode property\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) { ++ dev_err(dev, "missing qcom id property\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ /* The GMACs are called 1 to 4 in the documentation, but to simplify the ++ * code and keep it consistent with the Linux convention, we'll number ++ * them from 0 to 3 here. ++ */ ++ if (gmac->id < 0 || gmac->id > 3) { ++ dev_err(dev, "invalid gmac id\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ gmac->core_clk = devm_clk_get(dev, "stmmaceth"); ++ if (IS_ERR(gmac->core_clk)) { ++ dev_err(dev, "missing stmmaceth clk property\n"); ++ return gmac->core_clk; ++ } ++ clk_set_rate(gmac->core_clk, 266000000); ++ ++ /* Setup the register map for the nss common registers */ ++ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node, ++ "qcom,nss-common"); ++ if (IS_ERR(gmac->nss_common)) { ++ dev_err(dev, "missing nss-common node\n"); ++ return gmac->nss_common; ++ } ++ ++ /* Setup the register map for the qsgmii csr registers */ ++ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node, ++ "qcom,qsgmii-csr"); ++ if (IS_ERR(gmac->qsgmii_csr)) { ++ dev_err(dev, "missing qsgmii-csr node\n"); ++ return gmac->qsgmii_csr; ++ } ++ ++ return NULL; ++} ++ ++static void *ipq806x_gmac_setup(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ipq806x_gmac *gmac; ++ int val; ++ void *err; ++ ++ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); ++ if (!gmac) ++ return ERR_PTR(-ENOMEM); ++ ++ gmac->pdev = pdev; ++ ++ err = ipq806x_gmac_of_parse(gmac); ++ if (err) { ++ dev_err(dev, "device tree parsing error\n"); ++ return err; ++ } ++ ++ regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL, ++ QSGMII_PCS_CAL_LCKDT_CTL_RST); ++ ++ /* Inter frame gap is set to 12 */ ++ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET | ++ 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET; ++ /* We also initiate an AXI low power exit request */ ++ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ; ++ switch (gmac->phy_mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; ++ break; ++ case PHY_INTERFACE_MODE_SGMII: ++ val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; ++ break; ++ default: ++ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", ++ phy_modes(gmac->phy_mode)); ++ return NULL; ++ } ++ regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val); ++ ++ /* Configure the clock src according to the mode */ ++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val); ++ val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); ++ switch (gmac->phy_mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) << ++ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); ++ break; ++ case PHY_INTERFACE_MODE_SGMII: ++ val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) << ++ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); ++ break; ++ default: ++ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", ++ phy_modes(gmac->phy_mode)); ++ return NULL; ++ } ++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val); ++ ++ /* Enable PTP clock */ ++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); ++ val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); ++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); ++ ++ if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) { ++ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), ++ QSGMII_PHY_CDR_EN | ++ QSGMII_PHY_RX_FRONT_EN | ++ QSGMII_PHY_RX_SIGNAL_DETECT_EN | ++ QSGMII_PHY_TX_DRIVER_EN | ++ QSGMII_PHY_QSGMII_EN | ++ 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET | ++ 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET | ++ 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET | ++ 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET | ++ 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET); ++ } ++ ++ return gmac; ++} ++ ++static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed) ++{ ++ struct ipq806x_gmac *gmac = priv; ++ ++ ipq806x_gmac_set_speed(gmac, speed); ++} ++ ++const struct stmmac_of_data ipq806x_gmac_data = { ++ .has_gmac = 1, ++ .setup = ipq806x_gmac_setup, ++ .fix_mac_speed = ipq806x_gmac_fix_mac_speed, ++}; |