1 files changed, 0 insertions, 150 deletions
diff --git a/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch b/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch
deleted file mode 100644
index b2564a5..0000000
--- a/target/linux/ipq806x/patches-4.4/310-add-necessary-thermal-data.patch
+++ /dev/null
@@ -1,150 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -31,6 +31,9 @@
- 			clock-latency = <100000>;
- 			cpu-supply = <&smb208_s2a>;
- 			voltage-tolerance = <5>;
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
- 			cpu-idle-states = <&CPU_SPC>;
- 		};
- 
-@@ -46,6 +49,9 @@
- 			clock-names = "cpu", "l2";
- 			clock-latency = <100000>;
- 			cpu-supply = <&smb208_s2b>;
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
- 			cpu-idle-states = <&CPU_SPC>;
- 		};
- 
-@@ -70,6 +76,92 @@
- 		};
- 	};
- 
-+	thermal-zones {
-+		cpu-thermal0 {
-+			polling-delay-passive = <250>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&gcc 5>;
-+			coefficients = <1132 0>;
-+
-+			trips {
-+				cpu_alert0: trip0 {
-+					temperature = <75000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu_crit0: trip1 {
-+					temperature = <110000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		cpu-thermal1 {
-+			polling-delay-passive = <250>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&gcc 6>;
-+			coefficients = <1132 0>;
-+
-+			trips {
-+				cpu_alert1: trip0 {
-+					temperature = <75000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu_crit1: trip1 {
-+					temperature = <110000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		cpu-thermal2 {
-+			polling-delay-passive = <250>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&gcc 7>;
-+			coefficients = <1199 0>;
-+
-+			trips {
-+				cpu_alert2: trip0 {
-+					temperature = <75000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu_crit2: trip1 {
-+					temperature = <110000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+
-+		cpu-thermal3 {
-+			polling-delay-passive = <250>;
-+			polling-delay = <1000>;
-+
-+			thermal-sensors = <&gcc 8>;
-+			coefficients = <1132 0>;
-+
-+			trips {
-+				cpu_alert3: trip0 {
-+					temperature = <75000>;
-+					hysteresis = <2000>;
-+					type = "passive";
-+				};
-+				cpu_crit3: trip1 {
-+					temperature = <110000>;
-+					hysteresis = <2000>;
-+					type = "critical";
-+				};
-+			};
-+		};
-+	};
-+
- 	cpu-pmu {
- 		compatible = "qcom,krait-pmu";
- 		interrupts = <1 10 0x304>;
-@@ -172,6 +264,21 @@
- 			reg-names = "lpass-lpaif";
- 		};
- 
-+		qfprom: qfprom@700000 {
-+			compatible = "qcom,qfprom", "syscon";
-+			reg = <0x00700000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			tsens_calib: calib {
-+				reg = <0x400 0x10>;
-+			};
-+			tsens_backup: backup_calib {
-+				reg = <0x410 0x10>;
-+			};
-+		};
-+
- 		rpm@108000 {
- 			compatible = "qcom,rpm-ipq8064";
- 			reg = <0x108000 0x1000>;
-@@ -499,8 +606,12 @@
- 		gcc: clock-controller@900000 {
- 			compatible = "qcom,gcc-ipq8064";
- 			reg = <0x00900000 0x4000>;
-+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-+			nvmem-cell-names = "calib", "calib_backup";
- 			#clock-cells = <1>;
- 			#reset-cells = <1>;
-+			#power-domain-cells = <1>;
-+			#thermal-sensor-cells = <1>;
- 		};
- 
- 		tcsr: syscon@1a400000 {