summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x/patches-4.9/999-dts.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.9/999-dts.patch')
-rw-r--r--target/linux/ipq806x/patches-4.9/999-dts.patch4069
1 files changed, 9 insertions, 4060 deletions
diff --git a/target/linux/ipq806x/patches-4.9/999-dts.patch b/target/linux/ipq806x/patches-4.9/999-dts.patch
index abbaad5..ff970ea 100644
--- a/target/linux/ipq806x/patches-4.9/999-dts.patch
+++ b/target/linux/ipq806x/patches-4.9/999-dts.patch
@@ -1,58 +1,8 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -573,92 +573,61 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
- omap4-var-stk-om44.dtb
- dtb-$(CONFIG_SOC_AM43XX) += \
- am43x-epos-evm.dtb \
-- am437x-cm-t43.dtb \
-- am437x-gp-evm.dtb \
-+ am437x-sk-evm.dtb \
- am437x-idk-evm.dtb \
-- am437x-sbc-t43.dtb \
-- am437x-sk-evm.dtb
-+ am437x-gp-evm.dtb
- dtb-$(CONFIG_SOC_OMAP5) += \
- omap5-cm-t54.dtb \
- omap5-igep0050.dtb \
- omap5-sbc-t54.dtb \
- omap5-uevm.dtb
- dtb-$(CONFIG_SOC_DRA7XX) += \
-- am57xx-beagle-x15.dtb \
-- am57xx-beagle-x15-revb1.dtb \
-- am57xx-cl-som-am57x.dtb \
-- am57xx-sbc-am57x.dtb \
-- am572x-idk.dtb \
- dra7-evm.dtb \
-- dra72-evm.dtb \
-- dra72-evm-revc.dtb
-+ am57xx-beagle-x15.dtb \
-+ dra72-evm.dtb
- dtb-$(CONFIG_ARCH_ORION5X) += \
-- orion5x-kuroboxpro.dtb \
- orion5x-lacie-d2-network.dtb \
- orion5x-lacie-ethernet-disk-mini-v2.dtb \
-- orion5x-linkstation-lsgl.dtb \
- orion5x-linkstation-lswtgl.dtb \
- orion5x-lswsgl.dtb \
- orion5x-maxtor-shared-storage-2.dtb \
-- orion5x-netgear-wnr854t.dtb \
- orion5x-rd88f5182-nas.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += \
- prima2-evb.dtb
--dtb-$(CONFIG_ARCH_OXNAS) += \
-- wd-mbwe.dtb
- dtb-$(CONFIG_ARCH_QCOM) += \
-- qcom-apq8060-dragonboard.dtb \
-- qcom-apq8064-arrow-sd-600eval.dtb \
- qcom-apq8064-cm-qs600.dtb \
- qcom-apq8064-ifc6410.dtb \
-- qcom-apq8064-sony-xperia-yuga.dtb \
-- qcom-apq8064-asus-nexus7-flo.dtb \
- qcom-apq8074-dragonboard.dtb \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
-- qcom-ipq4019-ap.dk01.1-c1.dtb \
-- qcom-ipq4019-ap.dk04.1-c1.dtb \
+@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
@@ -64,83 +14,10 @@
+ qcom-ipq8065-r7800.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
-- qcom-msm8974-lge-nexus5-hammerhead.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
- dtb-$(CONFIG_ARCH_REALVIEW) += \
-- arm-realview-pb1176.dtb \
-- arm-realview-pb11mp.dtb \
-- arm-realview-eb.dtb \
-- arm-realview-eb-bbrevd.dtb \
-- arm-realview-eb-11mp.dtb \
-- arm-realview-eb-11mp-bbrevd.dtb \
-- arm-realview-eb-11mp-ctrevb.dtb \
-- arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-- arm-realview-eb-a9mp.dtb \
-- arm-realview-eb-a9mp-bbrevd.dtb \
-- arm-realview-pba8.dtb \
-- arm-realview-pbx-a9.dtb
-+ arm-realview-pb1176.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-- rk3036-evb.dtb \
-- rk3036-kylin.dtb \
- rk3066a-bqcurie2.dtb \
- rk3066a-marsboard.dtb \
- rk3066a-rayeager.dtb \
- rk3188-radxarock.dtb \
-- rk3228-evb.dtb \
-- rk3229-evb.dtb \
- rk3288-evb-act8846.dtb \
- rk3288-evb-rk808.dtb \
-- rk3288-fennec.dtb \
- rk3288-firefly-beta.dtb \
- rk3288-firefly.dtb \
-- rk3288-firefly-reload.dtb \
-- rk3288-miqi.dtb \
- rk3288-popmetal.dtb \
- rk3288-r89.dtb \
- rk3288-rock2-square.dtb \
-- rk3288-veyron-brain.dtb \
- rk3288-veyron-jaq.dtb \
- rk3288-veyron-jerry.dtb \
-- rk3288-veyron-mickey.dtb \
- rk3288-veyron-minnie.dtb \
- rk3288-veyron-pinky.dtb \
- rk3288-veyron-speedy.dtb
+ qcom-msm8974-lge-nexus5-hammerhead.dtb \
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -4,12 +4,9 @@
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-- aliases {
-- serial0 = &gsbi4_serial;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
- };
-
- reserved-memory {
-@@ -22,6 +19,15 @@
- };
- };
-
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
- soc {
- pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
-@@ -60,6 +66,25 @@
+@@ -60,6 +60,25 @@
bias-bus-hold;
};
};
@@ -166,7 +43,7 @@
};
gsbi@16300000 {
-@@ -69,14 +94,12 @@
+@@ -69,14 +88,12 @@
status = "ok";
};
@@ -187,7 +64,7 @@
};
gsbi5: gsbi@1a200000 {
-@@ -99,15 +122,7 @@
+@@ -99,15 +116,7 @@
spi-max-frequency = <50000000>;
reg = <0>;
@@ -204,11 +81,7 @@
};
};
};
-@@ -117,23 +132,105 @@
- };
-
- sata@29000000 {
-- ports-implemented = <0x1>;
+@@ -121,19 +130,102 @@
status = "ok";
};
@@ -316,1158 +189,6 @@
};
};
};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
-@@ -0,0 +1,501 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "TP-Link Archer C2600";
-+ compatible = "tplink,c2600", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &general;
-+ led-running = &power;
-+ led-upgrade = &general;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio16", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
-+ "gpio53", "gpio66";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
-+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ usb0_pwr_en_pin: usb0_pwr_en_pin {
-+ mux {
-+ pins = "gpio25";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pin: usb1_pwr_en_pin {
-+ mux {
-+ pins = "gpio23";
-+ function = "gpio";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi5: spi@1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80@0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+
-+ MIBIB@20000 {
-+ label = "MIBIB";
-+ reg = <0x20000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL2@40000 {
-+ label = "SBL2";
-+ reg = <0x40000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL3@60000 {
-+ label = "SBL3";
-+ reg = <0x60000 0x30000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG@90000 {
-+ label = "DDRCONFIG";
-+ reg = <0x90000 0x10000>;
-+ read-only;
-+ };
-+
-+ SSD@a0000 {
-+ label = "SSD";
-+ reg = <0xa0000 0x10000>;
-+ read-only;
-+ };
-+
-+ TZ@b0000 {
-+ label = "TZ";
-+ reg = <0xb0000 0x30000>;
-+ read-only;
-+ };
-+
-+ RPM@e0000 {
-+ label = "RPM";
-+ reg = <0xe0000 0x20000>;
-+ read-only;
-+ };
-+
-+ fs-uboot@100000 {
-+ label = "fs-uboot";
-+ reg = <0x100000 0x70000>;
-+ read-only;
-+ };
-+
-+ uboot-env@170000 {
-+ label = "uboot-env";
-+ reg = <0x170000 0x40000>;
-+ read-only;
-+ };
-+
-+ radio@1b0000 {
-+ label = "radio";
-+ reg = <0x1b0000 0x40000>;
-+ read-only;
-+ };
-+
-+ os-image@1f0000 {
-+ label = "os-image";
-+ reg = <0x1f0000 0x200000>;
-+ };
-+
-+ rootfs@3f0000 {
-+ label = "rootfs";
-+ reg = <0x3f0000 0x1b00000>;
-+ };
-+
-+ defaultmac: default-mac@1ef0000 {
-+ label = "default-mac";
-+ reg = <0x1ef0000 0x00200>;
-+ read-only;
-+ };
-+
-+ pin@1ef0200 {
-+ label = "pin";
-+ reg = <0x1ef0200 0x00200>;
-+ read-only;
-+ };
-+
-+ product-info@1ef0400 {
-+ label = "product-info";
-+ reg = <0x1ef0400 0x0fc00>;
-+ read-only;
-+ };
-+
-+ partition-table@1f00000 {
-+ label = "partition-table";
-+ reg = <0x1f00000 0x10000>;
-+ read-only;
-+ };
-+
-+ soft-version@1f10000 {
-+ label = "soft-version";
-+ reg = <0x1f10000 0x10000>;
-+ read-only;
-+ };
-+
-+ support-list@1f20000 {
-+ label = "support-list";
-+ reg = <0x1f20000 0x10000>;
-+ read-only;
-+ };
-+
-+ profile@1f30000 {
-+ label = "profile";
-+ reg = <0x1f30000 0x10000>;
-+ read-only;
-+ };
-+
-+ default-config@1f40000 {
-+ label = "default-config";
-+ reg = <0x1f40000 0x10000>;
-+ read-only;
-+ };
-+
-+ user-config@1f50000 {
-+ label = "user-config";
-+ reg = <0x1f50000 0x40000>;
-+ read-only;
-+ };
-+
-+ qos-db@1f90000 {
-+ label = "qos-db";
-+ reg = <0x1f90000 0x40000>;
-+ read-only;
-+ };
-+
-+ usb-config@1fd0000 {
-+ label = "usb-config";
-+ reg = <0x1fd0000 0x10000>;
-+ read-only;
-+ };
-+
-+ log@1fe0000 {
-+ label = "log";
-+ reg = <0x1fe0000 0x20000>;
-+ read-only;
-+ };
-+ };
-+ };
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pin>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pin>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+ mtd-mac-address-increment = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+
-+ ledswitch {
-+ label = "ledswitch";
-+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_LIGHTS_TOGGLE>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ lan {
-+ label = "c2600:white:lan";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb4 {
-+ label = "c2600:white:usb_4";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "c2600:white:usb_2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "c2600:white:wps";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "c2600:amber:wan";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wan_white {
-+ label = "c2600:white:wan";
-+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ power: power {
-+ label = "c2600:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ general: general {
-+ label = "c2600:white:general";
-+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
-@@ -0,0 +1,406 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 D7800";
-+ compatible = "netgear,d7800", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0xe000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata@0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art@1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art@1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel@1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi@1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
-+
-+ netgear@3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
-+
-+ reserve@7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
-+
-+ firmware@1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy4>;
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "d7800:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "d7800:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_amber: power_amber {
-+ label = "d7800:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_white {
-+ label = "d7800:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "d7800:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "d7800:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "d7800:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_white: power_white {
-+ label = "d7800:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "d7800:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -0,0 +1,236 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+/ {
-+ model = "Qualcomm IPQ8064/DB149";
-+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ alias {
-+ serial0 = &uart2;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ i2c4_pins: i2c4_pinmux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ bias-disable;
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii0_pins: rgmii0_pins {
-+ mux {
-+ pins = "gpio2", "gpio66";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi2: gsbi@12480000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ uart2: serial@12490000 {
-+ status = "ok";
-+ };
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi@1a280000 {
-+ status = "ok";
-+ spi-max-frequency = <50000000>;
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 0>;
-+
-+ flash: m25p80@0 {
-+ compatible = "s25fl256s1";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+ m25p,fast-read;
-+
-+ partition@0 {
-+ label = "lowlevel_init";
-+ reg = <0x0 0x1b0000>;
-+ };
-+
-+ partition@1 {
-+ label = "u-boot";
-+ reg = <0x1b0000 0x80000>;
-+ };
-+
-+ partition@2 {
-+ label = "u-boot-env";
-+ reg = <0x230000 0x40000>;
-+ };
-+
-+ partition@3 {
-+ label = "caldata";
-+ reg = <0x270000 0x40000>;
-+ };
-+
-+ partition@4 {
-+ label = "firmware";
-+ reg = <0x2b0000 0x1d50000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ };
-+
-+ pcie2: pci@1b900000 {
-+ status = "ok";
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+
-+ phy6: ethernet-phy@6 {
-+ device_type = "ethernet-phy";
-+ reg = <6>;
-+ };
-+
-+ phy7: ethernet-phy@7 {
-+ device_type = "ethernet-phy";
-+ reg = <7>;
-+ };
-+ };
-+
-+ gmac0: ethernet@37000000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <0>;
-+ phy-handle = <&phy4>;
-+
-+ pinctrl-0 = <&rgmii0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ phy-handle = <&phy6>;
-+ };
-+
-+ gmac3: ethernet@37600000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <3>;
-+ phy-handle = <&phy7>;
-+ };
-+ };
-+};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1,11 +1,13 @@
@@ -1876,7 +597,7 @@
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
-+
++
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
@@ -1885,33 +606,6 @@
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
-@@ -174,7 +459,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial@12490000 {
-+ uart2: serial@12490000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12490000 0x1000>,
- <0x12480000 0x1000>;
-@@ -212,7 +497,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- gsbi4_serial: serial@16340000 {
-+ uart4: serial@16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
-@@ -249,7 +534,7 @@
-
- syscon-tcsr = <&tcsr>;
-
-- serial@1a240000 {
-+ uart5: serial@1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
@@ -328,8 +613,12 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064";
@@ -2299,2748 +993,3 @@
+ hwlocks = <&sfpb_mutex 3>;
};
};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
-@@ -0,0 +1,399 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Linksys EA8500 WiFi Router";
-+ compatible = "linksys,ea8500", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyMSM0,115200n8";
-+ linux,stdout-path = "serial0:115200n8";
-+ append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio65", "gpio67", "gpio68";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio6", "gpio53", "gpio54";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie2: pci@1b900000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0000000 0x0040000>;
-+ read-only;
-+ };
-+
-+ MIBIB@40000 {
-+ label = "MIBIB";
-+ reg = <0x0040000 0x0140000>;
-+ read-only;
-+ };
-+
-+ SBL2@180000 {
-+ label = "SBL2";
-+ reg = <0x0180000 0x0140000>;
-+ read-only;
-+ };
-+
-+ SBL3@2c0000 {
-+ label = "SBL3";
-+ reg = <0x02c0000 0x0280000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG@540000 {
-+ label = "DDRCONFIG";
-+ reg = <0x0540000 0x0120000>;
-+ read-only;
-+ };
-+
-+ SSD@660000 {
-+ label = "SSD";
-+ reg = <0x0660000 0x0120000>;
-+ read-only;
-+ };
-+
-+ TZ@780000 {
-+ label = "TZ";
-+ reg = <0x0780000 0x0280000>;
-+ read-only;
-+ };
-+
-+ RPM@a00000 {
-+ label = "RPM";
-+ reg = <0x0a00000 0x0280000>;
-+ read-only;
-+ };
-+
-+ art: art@c80000 {
-+ label = "art";
-+ reg = <0x0c80000 0x0140000>;
-+ read-only;
-+ };
-+
-+ APPSBL@dc0000 {
-+ label = "APPSBL";
-+ reg = <0x0dc0000 0x0100000>;
-+ read-only;
-+ };
-+
-+ u_env@ec0000 {
-+ label = "u_env";
-+ reg = <0x0ec0000 0x0040000>;
-+ };
-+
-+ s_env@f00000 {
-+ label = "s_env";
-+ reg = <0x0f00000 0x0040000>;
-+ };
-+
-+ devinfo@f40000 {
-+ label = "devinfo";
-+ reg = <0x0f40000 0x0040000>;
-+ };
-+
-+ linux@f80000 {
-+ label = "kernel1";
-+ reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
-+ };
-+
-+ rootfs@1280000 {
-+ label = "rootfs1";
-+ reg = <0x1280000 0x2500000>;
-+ };
-+
-+ linux2@3780000 {
-+ label = "kernel2";
-+ reg = <0x3780000 0x2800000>;
-+ };
-+
-+ rootfs2@3a80000 {
-+ label = "rootfs2";
-+ reg = <0x3a80000 0x2500000>;
-+ };
-+
-+ syscfg@5f80000 {
-+ label = "syscfg";
-+ reg = <0x5f80000 0x2080000>;
-+ };
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ //lan
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,emulation = <0>;
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ adm_dma: dma@18300000 {
-+ status = "ok";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART >;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ wps {
-+ label = "ea8500:green:wps";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "ea8500:white:power";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "ea8500:green:wifi";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
-@@ -0,0 +1,373 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 R7500";
-+ compatible = "netgear,r7500", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0xe000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata@0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art@1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel@1340000 {
-+ label = "kernel";
-+ reg = <0x1340000 0x0200000>;
-+ };
-+
-+ ubi@1540000 {
-+ label = "ubi";
-+ reg = <0x1540000 0x1800000>;
-+ };
-+
-+ netgear@2d40000 {
-+ label = "netgear";
-+ reg = <0x2d40000 0x0c00000>;
-+ read-only;
-+ };
-+
-+ reserve@3940000 {
-+ label = "reserve";
-+ reg = <0x3940000 0x46c0000>;
-+ read-only;
-+ };
-+
-+ firmware@1340000 {
-+ label = "firmware";
-+ reg = <0x1340000 0x1a00000>;
-+ };
-+
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "r7500:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "r7500:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_amber: power_amber {
-+ label = "r7500:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_white {
-+ label = "r7500:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "r7500:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "r7500:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "r7500:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_white: power_white {
-+ label = "r7500:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "r7500:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
-@@ -0,0 +1,416 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 R7500v2";
-+ compatible = "netgear,r7500v2", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+
-+ rsvd@5fe00000 {
-+ reg = <0x5fe00000 0x200000>;
-+ reusable;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata@0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art@1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art@1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel@1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi@1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
-+
-+ netgear@3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
-+
-+ reserve@7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
-+
-+ firmware@1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ usb1 {
-+ label = "r7500v2:amber:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb3 {
-+ label = "r7500v2:amber:usb3";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ status {
-+ label = "r7500v2:amber:status";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ internet {
-+ label = "r7500v2:white:internet";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "r7500v2:white:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "r7500v2:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "r7500v2:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "r7500v2:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi {
-+ label = "r7500v2:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
-@@ -0,0 +1,425 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "TP-Link Archer VR2600v";
-+ compatible = "tplink,vr2600v", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power;
-+ led-failsafe = &general;
-+ led-running = &power;
-+ led-upgrade = &general;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-+ "gpio26", "gpio53", "gpio56", "gpio66";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
-+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi@1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: W25Q128@0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+
-+ MIBIB@20000 {
-+ label = "MIBIB";
-+ reg = <0x20000 0x20000>;
-+ read-only;
-+ };
-+
-+ SBL2@40000 {
-+ label = "SBL2";
-+ reg = <0x40000 0x40000>;
-+ read-only;
-+ };
-+
-+ SBL3@80000 {
-+ label = "SBL3";
-+ reg = <0x80000 0x80000>;
-+ read-only;
-+ };
-+
-+ DDRCONFIG@100000 {
-+ label = "DDRCONFIG";
-+ reg = <0x100000 0x10000>;
-+ read-only;
-+ };
-+
-+ SSD@110000 {
-+ label = "SSD";
-+ reg = <0x110000 0x10000>;
-+ read-only;
-+ };
-+
-+ TZ@120000 {
-+ label = "TZ";
-+ reg = <0x120000 0x80000>;
-+ read-only;
-+ };
-+
-+ RPM@1a0000 {
-+ label = "RPM";
-+ reg = <0x1a0000 0x80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@220000 {
-+ label = "APPSBL";
-+ reg = <0x220000 0x80000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@2a0000 {
-+ label = "APPSBLENV";
-+ reg = <0x2a0000 0x40000>;
-+ read-only;
-+ };
-+
-+ OLDART@2e0000 {
-+ label = "OLDART";
-+ reg = <0x2e0000 0x40000>;
-+ read-only;
-+ };
-+
-+ kernel@320000 {
-+ label = "kernel";
-+ reg = <0x320000 0x200000>;
-+ };
-+
-+ rootfs@520000 {
-+ label = "rootfs";
-+ reg = <0x520000 0xa60000>;
-+ };
-+
-+ defaultmac: default-mac@0xfaf100 {
-+ label = "default-mac";
-+ reg = <0xfaf100 0x00200>;
-+ read-only;
-+ };
-+
-+ ART@fc0000 {
-+ label = "ART";
-+ reg = <0xfc0000 0x40000>;
-+ read-only;
-+ };
-+ };
-+ };
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&defaultmac 0>;
-+ mtd-mac-address-increment = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&defaultmac 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+
-+ dect {
-+ label = "dect";
-+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_PHONE>;
-+ };
-+
-+ ledswitch {
-+ label = "ledswitch";
-+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_LIGHTS_TOGGLE>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ dsl {
-+ label = "vr2600v:white:dsl";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb {
-+ label = "vr2600v:white:usb";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ lan {
-+ label = "vr2600v:white:lan";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wlan2g {
-+ label = "vr2600v:white:wlan2g";
-+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wlan5g {
-+ label = "vr2600v:white:wlan5g";
-+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "vr2600v:white:power";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ phone {
-+ label = "vr2600v:white:phone";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "vr2600v:white:wan";
-+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ general: general {
-+ label = "vr2600v:white:general";
-+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
-@@ -0,0 +1,153 @@
-+#include "qcom-ipq8064.dtsi"
-+
-+/ {
-+ model = "Qualcomm IPQ8065";
-+ compatible = "qcom,ipq8065", "qcom,ipq8064";
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 1725000000 1262500 >,
-+ < 1400000000 1175000 >,
-+ < 1000000000 1100000 >,
-+ < 800000000 1050000 >,
-+ < 600000000 1000000 >,
-+ < 384000000 975000 >;
-+ qcom,speed0-pvs1-bin-v0 =
-+ < 1725000000 1225000 >,
-+ < 1400000000 1150000 >,
-+ < 1000000000 1075000 >,
-+ < 800000000 1025000 >,
-+ < 600000000 975000 >,
-+ < 384000000 950000 >;
-+ qcom,speed0-pvs2-bin-v0 =
-+ < 1725000000 1200000 >,
-+ < 1400000000 1125000 >,
-+ < 1000000000 1050000 >,
-+ < 800000000 1000000 >,
-+ < 600000000 950000 >,
-+ < 384000000 925000 >;
-+ qcom,speed0-pvs3-bin-v0 =
-+ < 1725000000 1175000 >,
-+ < 1400000000 1100000 >,
-+ < 1000000000 1025000 >,
-+ < 800000000 975000 >,
-+ < 600000000 925000 >,
-+ < 384000000 900000 >;
-+ qcom,speed0-pvs4-bin-v0 =
-+ < 1725000000 1150000 >,
-+ < 1400000000 1075000 >,
-+ < 1000000000 1000000 >,
-+ < 800000000 950000 >,
-+ < 600000000 900000 >,
-+ < 384000000 875000 >;
-+ qcom,speed0-pvs5-bin-v0 =
-+ < 1725000000 1100000 >,
-+ < 1400000000 1025000 >,
-+ < 1000000000 950000 >,
-+ < 800000000 900000 >,
-+ < 600000000 850000 >,
-+ < 384000000 825000 >;
-+ qcom,speed0-pvs6-bin-v0 =
-+ < 1725000000 1050000 >,
-+ < 1400000000 975000 >,
-+ < 1000000000 900000 >,
-+ < 800000000 850000 >,
-+ < 600000000 800000 >,
-+ < 384000000 775000 >;
-+ };
-+
-+ soc: soc {
-+
-+ rpm@108000 {
-+
-+ regulators {
-+
-+ smb208_s2a: s2a {
-+ regulator-min-microvolt = <775000>;
-+ regulator-max-microvolt = <1275000>;
-+ };
-+
-+ smb208_s2b: s2b {
-+ regulator-min-microvolt = <775000>;
-+ regulator-max-microvolt = <1275000>;
-+ };
-+ };
-+ };
-+
-+ /* Temporary fixed regulator */
-+ vsdcc_fixed: vsdcc-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "SDCC Power";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ sdcc1bam:dma@12402000 {
-+ compatible = "qcom,bam-v1.3.0";
-+ reg = <0x12402000 0x8000>;
-+ interrupts = <0 98 0>;
-+ clocks = <&gcc SDC1_H_CLK>;
-+ clock-names = "bam_clk";
-+ #dma-cells = <1>;
-+ qcom,ee = <0>;
-+ };
-+
-+ sdcc3bam:dma@12182000 {
-+ compatible = "qcom,bam-v1.3.0";
-+ reg = <0x12182000 0x8000>;
-+ interrupts = <0 96 0>;
-+ clocks = <&gcc SDC3_H_CLK>;
-+ clock-names = "bam_clk";
-+ #dma-cells = <1>;
-+ qcom,ee = <0>;
-+ };
-+
-+ amba {
-+ compatible = "arm,amba-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ sdcc1: sdcc@12400000 {
-+ status = "disabled";
-+ compatible = "arm,pl18x", "arm,primecell";
-+ arm,primecell-periphid = <0x00051180>;
-+ reg = <0x12400000 0x2000>;
-+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "cmd_irq";
-+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-+ clock-names = "mclk", "apb_pclk";
-+ bus-width = <8>;
-+ max-frequency = <96000000>;
-+ non-removable;
-+ cap-sd-highspeed;
-+ cap-mmc-highspeed;
-+ vmmc-supply = <&vsdcc_fixed>;
-+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-+ dma-names = "tx", "rx";
-+ };
-+
-+ sdcc3: sdcc@12180000 {
-+ compatible = "arm,pl18x", "arm,primecell";
-+ arm,primecell-periphid = <0x00051180>;
-+ status = "disabled";
-+ reg = <0x12180000 0x2000>;
-+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "cmd_irq";
-+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-+ clock-names = "mclk", "apb_pclk";
-+ bus-width = <8>;
-+ cap-sd-highspeed;
-+ cap-mmc-highspeed;
-+ max-frequency = <192000000>;
-+ #mmc-ddr-1_8v;
-+ sd-uhs-sdr104;
-+ sd-uhs-ddr50;
-+ vqmmc-supply = <&vsdcc_fixed>;
-+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-+ dma-names = "tx", "rx";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
-@@ -0,0 +1,388 @@
-+#include "qcom-ipq8065-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "ZyXEL NBG6817";
-+ compatible = "zyxel,nbg6817", "qcom,ipq8065";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ sdcc1 = &sdcc1;
-+
-+ led-boot = &power;
-+ led-failsafe = &power;
-+ led-running = &power;
-+ led-upgrade = &power;
-+ };
-+
-+ chosen {
-+ bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ mux {
-+ pins = "gpio9", "gpio26", "gpio33", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-down;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ clk {
-+ pins = "gpio1";
-+ input-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ tx {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-+ input-disable;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio17";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ };
-+
-+ pwr {
-+ pins = "gpio17";
-+ bias-pull-down;
-+ output-high;
-+ };
-+
-+ ovc {
-+ pins = "gpio16";
-+ bias-pull-up;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio14", "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ };
-+
-+ pwr {
-+ pins = "gpio14";
-+ bias-pull-down;
-+ output-high;
-+ };
-+
-+ ovc {
-+ pins = "gpio15";
-+ bias-pull-up;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi@1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80@0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <51200000>;
-+ reg = <0>;
-+
-+ linux,part-probe = "qcom-smem";
-+ };
-+ };
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
-+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
-+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
-+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
-+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
-+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
-+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
-+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
-+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
-+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
-+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
-+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
-+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
-+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ qca,ar8327-initvals = <
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ >;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <0>;
-+ qcom,rgmii_delay = <1>;
-+ qcom,phy_mii_type = <0>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <255>;
-+ mdiobus = <&mdio0>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,phy_mii_type = <1>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <258>;
-+ mdiobus = <&mdio0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ amba {
-+ sdcc1: sdcc@12400000 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ internet {
-+ label = "nbg6817:white:internet";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power: power {
-+ label = "nbg6817:white:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ wifi2g {
-+ label = "nbg6817:amber:wifi2g";
-+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ /* wifi2g amber from the manual is missing */
-+
-+ wifi5g {
-+ label = "nbg6817:amber:wifi5g";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ /* wifi5g amber from the manual is missing */
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
-@@ -0,0 +1,566 @@
-+#include "qcom-ipq8065-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4S R7800";
-+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+
-+ rsvd@5fe00000 {
-+ reg = <0x5fe00000 0x200000>;
-+ reusable;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+
-+ led-boot = &power_white;
-+ led-failsafe = &power_amber;
-+ led-running = &power_white;
-+ led-upgrade = &power_amber;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ button_pins: button_pins {
-+ mux {
-+ pins = "gpio6", "gpio54", "gpio65";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ i2c4_pins: i2c4_pinmux {
-+ mux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ led_pins: led_pins {
-+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-+ "gpio24","gpio26", "gpio53", "gpio64";
-+ function = "gpio";
-+ drive-strength = <2>;
-+ bias-pull-down;
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ clk {
-+ pins = "gpio1";
-+ input-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+
-+ tx {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-+ input-disable;
-+ };
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ bias-pull-down;
-+ };
-+
-+ data {
-+ pins = "gpio18", "gpio19";
-+ drive-strength = <10>;
-+ };
-+
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <10>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio21";
-+ drive-strength = <12>;
-+ };
-+ };
-+
-+ spi6_pins: spi6_pins {
-+ mux {
-+ pins = "gpio55", "gpio56", "gpio58";
-+ function = "gsbi6";
-+ bias-pull-down;
-+ };
-+
-+ mosi {
-+ pins = "gpio55";
-+ drive-strength = <12>;
-+ };
-+
-+ miso {
-+ pins = "gpio56";
-+ drive-strength = <14>;
-+ };
-+
-+ cs {
-+ pins = "gpio57";
-+ drive-strength = <12>;
-+ bias-pull-up;
-+ };
-+
-+ clk {
-+ pins = "gpio58";
-+ drive-strength = <12>;
-+ };
-+
-+ reset {
-+ pins = "gpio33";
-+ drive-strength = <10>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb0_pwr_en_pins: usb0_pwr_en_pins {
-+ mux {
-+ pins = "gpio15";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+
-+ usb1_pwr_en_pins: usb1_pwr_en_pins {
-+ mux {
-+ pins = "gpio16", "gpio68";
-+ function = "gpio";
-+ drive-strength = <12>;
-+ bias-pull-down;
-+ output-high;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi5: spi@1a280000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-+
-+ flash: m25p80@0 {
-+ compatible = "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ linux,part-probe = "qcom-smem";
-+ };
-+ };
-+ };
-+
-+ gsbi6: gsbi@16500000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+ spi6: spi@16580000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&spi6_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-+
-+ spi-nor@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <6000000>;
-+ };
-+ };
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ ports-implemented = <0x1>;
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb0_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&usb1_pwr_en_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata@0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art@1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art@1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel@1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi@1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
-+
-+ netgear@3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
-+
-+ reserve@7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
-+
-+ firmware@1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
-+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
-+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
-+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
-+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
-+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
-+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
-+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
-+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
-+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
-+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
-+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
-+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
-+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
-+ >;
-+ qca,ar8327-vlans = <
-+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
-+ 0x2 0x21 /* VLAN2 Ports 0/5 */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ qca,ar8327-initvals = <
-+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ >;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <0>;
-+ qcom,rgmii_delay = <1>;
-+ qcom,phy_mii_type = <0>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <255>;
-+ mdiobus = <&mdio0>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+ qcom,phy_mdio_addr = <0>; /* none */
-+ qcom,poll_required = <0>; /* no polling */
-+ qcom,rgmii_delay = <0>;
-+ qcom,phy_mii_type = <1>;
-+ qcom,emulation = <0>;
-+ qcom,irq = <258>;
-+ mdiobus = <&mdio0>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ rpm@108000 {
-+ pinctrl-0 = <&i2c4_pins>;
-+ pinctrl-names = "default";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&button_pins>;
-+ pinctrl-names = "default";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RFKILL>;
-+ debounce-interval = <60>;
-+ wakeup-source;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <60>;
-+ wakeup-source;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ debounce-interval = <60>;
-+ wakeup-source;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&led_pins>;
-+ pinctrl-names = "default";
-+
-+ power_white: power_white {
-+ label = "r7800:white:power";
-+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-+ default-state = "keep";
-+ };
-+
-+ power_amber: power_amber {
-+ label = "r7800:amber:power";
-+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_white {
-+ label = "r7800:white:wan";
-+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan_amber {
-+ label = "r7800:amber:wan";
-+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb1 {
-+ label = "r7800:white:usb1";
-+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2 {
-+ label = "r7800:white:usb2";
-+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ esata {
-+ label = "r7800:white:esata";
-+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wifi {
-+ label = "r7800:white:wifi";
-+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "r7800:white:wps";
-+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
-@@ -0,0 +1 @@
-+#include "qcom-ipq8065.dtsi"
generated by cgit v1.1 at 2024-12-04 00:05:43 +0000