diff options
Diffstat (limited to 'target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch')
| -rw-r--r-- | target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch b/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch new file mode 100644 index 0000000..c1ccc21 --- /dev/null +++ b/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch @@ -0,0 +1,132 @@ +From 8b9de04ef3aaa154f30baf1ac703a2d3b474ad4e Mon Sep 17 00:00:00 2001 +From: Andy Gross <agross@codeaurora.org> +Date: Thu, 12 Jun 2014 14:34:12 -0500 +Subject: [PATCH 135/182] spi: qup: Add support for v1.1.1 + +This patch adds support for v1.1.1 of the SPI QUP controller. + +Signed-off-by: Andy Gross <agross@codeaurora.org> +--- + .../devicetree/bindings/spi/qcom,spi-qup.txt | 6 +++- + drivers/spi/spi-qup.c | 36 ++++++++++++-------- + 2 files changed, 27 insertions(+), 15 deletions(-) + +diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +index bee6ff2..e2c88df 100644 +--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt ++++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol variants. + + Required properties: +-- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1" ++- compatible: Should contain: ++ "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. ++ "qcom,spi-qup-v2.1.1" for 8974 and later ++ "qcom,spi-qup-v2.2.1" for 8974 v2 and later. ++ + - reg: Should contain base register location and length + - interrupts: Interrupt number used by this controller + +diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c +index a404298..c137226 100644 +--- a/drivers/spi/spi-qup.c ++++ b/drivers/spi/spi-qup.c +@@ -142,6 +142,7 @@ struct spi_qup { + int w_size; /* bytes per SPI word */ + int tx_bytes; + int rx_bytes; ++ int qup_v1; + }; + + +@@ -420,7 +421,9 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) + config |= QUP_CONFIG_SPI_MODE; + writel_relaxed(config, controller->base + QUP_CONFIG); + +- writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK); ++ /* only write to OPERATIONAL_MASK when register is present */ ++ if (!controller->qup_v1) ++ writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK); + return 0; + } + +@@ -486,7 +489,7 @@ static int spi_qup_probe(struct platform_device *pdev) + struct resource *res; + struct device *dev; + void __iomem *base; +- u32 data, max_freq, iomode; ++ u32 max_freq, iomode; + int ret, irq, size; + + dev = &pdev->dev; +@@ -529,15 +532,6 @@ static int spi_qup_probe(struct platform_device *pdev) + return ret; + } + +- data = readl_relaxed(base + QUP_HW_VERSION); +- +- if (data < QUP_HW_VERSION_2_1_1) { +- clk_disable_unprepare(cclk); +- clk_disable_unprepare(iclk); +- dev_err(dev, "v.%08x is not supported\n", data); +- return -ENXIO; +- } +- + master = spi_alloc_master(dev, sizeof(struct spi_qup)); + if (!master) { + clk_disable_unprepare(cclk); +@@ -570,6 +564,10 @@ static int spi_qup_probe(struct platform_device *pdev) + controller->cclk = cclk; + controller->irq = irq; + ++ /* set v1 flag if device is version 1 */ ++ if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1")) ++ controller->qup_v1 = 1; ++ + spin_lock_init(&controller->lock); + init_completion(&controller->done); + +@@ -593,8 +591,8 @@ static int spi_qup_probe(struct platform_device *pdev) + size = QUP_IO_M_INPUT_FIFO_SIZE(iomode); + controller->in_fifo_sz = controller->in_blk_sz * (2 << size); + +- dev_info(dev, "v.%08x IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n", +- data, controller->in_blk_sz, controller->in_fifo_sz, ++ dev_info(dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n", ++ controller->in_blk_sz, controller->in_fifo_sz, + controller->out_blk_sz, controller->out_fifo_sz); + + writel_relaxed(1, base + QUP_SW_RESET); +@@ -607,10 +605,19 @@ static int spi_qup_probe(struct platform_device *pdev) + + writel_relaxed(0, base + QUP_OPERATIONAL); + writel_relaxed(0, base + QUP_IO_M_MODES); +- writel_relaxed(0, base + QUP_OPERATIONAL_MASK); ++ ++ if (!controller->qup_v1) ++ writel_relaxed(0, base + QUP_OPERATIONAL_MASK); ++ + writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN, + base + SPI_ERROR_FLAGS_EN); + ++ /* if earlier version of the QUP, disable INPUT_OVERRUN */ ++ if (controller->qup_v1) ++ writel_relaxed(QUP_ERROR_OUTPUT_OVER_RUN | ++ QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN, ++ base + QUP_ERROR_FLAGS_EN); ++ + writel_relaxed(0, base + SPI_CONFIG); + writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL); + +@@ -732,6 +739,7 @@ static int spi_qup_remove(struct platform_device *pdev) + } + + static struct of_device_id spi_qup_dt_match[] = { ++ { .compatible = "qcom,spi-qup-v1.1.1", }, + { .compatible = "qcom,spi-qup-v2.1.1", }, + { .compatible = "qcom,spi-qup-v2.2.1", }, + { } +-- +1.7.10.4 + |