summaryrefslogtreecommitdiff
path: root/target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch')
-rw-r--r--target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch83
1 files changed, 0 insertions, 83 deletions
diff --git a/target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch b/target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch
deleted file mode 100644
index 05279de..0000000
--- a/target/linux/ipq806x/patches/0180-ARM-dts-Add-ADM-DMA-nodes-and-SPI-linkage.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From c78ae23b6c174c9f2e0973a247942b6b4adb7e82 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 26 Jun 2014 13:02:59 -0500
-Subject: [PATCH 180/182] ARM: dts: Add ADM DMA nodes and SPI linkage
-
-This patch adds the ADM DMA controller DT nodes and also enables the use of dma
-in SPI.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 11 +++++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
- 2 files changed, 16 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -44,6 +44,10 @@
- drive-strength = <10>;
- bias-none;
- };
-+ cs {
-+ pins = "gpio20";
-+ drive-strength = <12>;
-+ };
- };
- nand_pins: nand_pins {
- mux {
-@@ -100,12 +104,17 @@
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
-+ dmas = <&adm_dma 6 9>,
-+ <&adm_dma 5 10>;
-+ dma-names = "rx", "tx";
-+
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-+ m25p,fast-read;
-
- partition@0 {
- label = "rootfs";
-@@ -140,8 +149,10 @@
- ranges = <0x00000000 0 0x00000000 0x31f00000 0 0x00100000 /* configuration space */
- 0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-+
- };
-
-+
- sata-phy@1b400000 {
- status = "ok";
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -421,19 +421,21 @@
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
-+ #dma-cells = <2>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-- clock-names = "core_clk", "iface_clk";
-+ clock-names = "core", "iface";
-
- resets = <&gcc ADM0_RESET>,
- <&gcc ADM0_PBUS_RESET>,
- <&gcc ADM0_C0_RESET>,
- <&gcc ADM0_C1_RESET>,
- <&gcc ADM0_C2_RESET>;
--
-- reset-names = "adm", "pbus", "c0", "c1", "c2";
-+ reset-names = "clk", "pbus", "c0", "c1", "c2";
-+ qcom,ee = <0>;
-
- status = "disabled";
-+
- };
-
- nand@0x1ac00000 {