diff options
Diffstat (limited to 'target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch')
| -rw-r--r-- | target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch deleted file mode 100644 index 72bea00..0000000 --- a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch +++ /dev/null @@ -1,221 +0,0 @@ -Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig -+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig -@@ -49,6 +49,14 @@ config MACH_GATEWAY7001 - 7001 Access Point. For more information on this platform, - see http://openwrt.org - -+config MACH_WG302V1 -+ bool "Netgear WG302 v1 / WAG302 v1" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Netgear's -+ WG302 v1 or WAG302 v1 Access Points. For more information -+ on this platform, see http://openwrt.org -+ - config MACH_WG302V2 - bool "Netgear WG302 v2 / WAG302 v2" - select PCI -Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile -+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile -@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o - obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o -+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o - obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o - obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o -@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup. - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o - obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o -+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_FSG) += fsg-setup.o - obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o -Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-pci.c -=================================================================== ---- /dev/null -+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-pci.c -@@ -0,0 +1,63 @@ -+/* -+ * arch/arch/mach-ixp4xx/wg302v1-pci.c -+ * -+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1 -+ * -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Software, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+ -+#include <asm/mach/pci.h> -+ -+void __init wg302v1_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 1) -+ return IRQ_IXP4XX_GPIO8; -+ else if (slot == 2) -+ return IRQ_IXP4XX_GPIO10; -+ else return -1; -+} -+ -+struct hw_pci wg302v1_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = wg302v1_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = wg302v1_map_irq, -+}; -+ -+int __init wg302v1_pci_init(void) -+{ -+ if (machine_is_wg302v1()) -+ pci_common_init(&wg302v1_pci); -+ return 0; -+} -+ -+subsys_initcall(wg302v1_pci_init); -Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c -=================================================================== ---- /dev/null -+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c -@@ -0,0 +1,109 @@ -+/* -+ * arch/arm/mach-ixp4xx/wg302v1-setup.c -+ * -+ * Board setup for the Netgear WG302 v1 and WAG302 v1 -+ * -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <kaloz@openwrt.org> -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data wg302v1_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource wg302v1_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device wg302v1_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &wg302v1_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &wg302v1_flash_resource, -+}; -+ -+static struct resource wg302v1_uart_resource = { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port wg302v1_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device wg302v1_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = wg302v1_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &wg302v1_uart_resource, -+}; -+ -+static struct platform_device *wg302v1_devices[] __initdata = { -+ &wg302v1_flash, -+ &wg302v1_uart, -+}; -+ -+static void __init wg302v1_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices)); -+} -+ -+#ifdef CONFIG_MACH_WG302V1 -+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = wg302v1_init, -+MACHINE_END -+#endif |