diff options
Diffstat (limited to 'target/linux/ixp4xx/patches-3.3/120-compex_support.patch')
-rw-r--r-- | target/linux/ixp4xx/patches-3.3/120-compex_support.patch | 74 |
1 files changed, 28 insertions, 46 deletions
diff --git a/target/linux/ixp4xx/patches-3.3/120-compex_support.patch b/target/linux/ixp4xx/patches-3.3/120-compex_support.patch index 3166f67..70401cc 100644 --- a/target/linux/ixp4xx/patches-3.3/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-3.3/120-compex_support.patch @@ -5,13 +5,6 @@ Subject: [PATCH] Add support for the Compex WP18 / NP18A boards Signed-off-by: Imre Kaloz <kaloz@openwrt.org> --- - arch/arm/mach-ixp4xx/Kconfig | 8 ++ - arch/arm/mach-ixp4xx/Makefile | 2 + - arch/arm/mach-ixp4xx/compex-setup.c | 136 +++++++++++++++++++++++++++++++++++ - arch/arm/mach-ixp4xx/ixdp425-pci.c | 3 +- - arch/arm/tools/mach-types | 2 +- - 5 files changed, 149 insertions(+), 2 deletions(-) - create mode 100644 arch/arm/mach-ixp4xx/compex-setup.c --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -19,7 +12,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Engineering Sidewinder board. For more information on this platform, see http://www.adiengineering.com -+config MACH_COMPEX ++config MACH_COMPEXWP18 + bool "Compex WP18 / NP18A" + select PCI + help @@ -36,7 +29,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o -+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o ++obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o obj-y += common.o @@ -44,12 +37,12 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o -+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o ++obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- /dev/null -+++ b/arch/arm/mach-ixp4xx/compex-setup.c ++++ b/arch/arm/mach-ixp4xx/compex42x-setup.c @@ -0,0 +1,138 @@ +/* + * arch/arm/mach-ixp4xx/compex-setup.c @@ -77,21 +70,21 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + .width = 2, +}; + -+static struct resource compex_flash_resource = { ++static struct resource compex42x_flash_resource = { + .flags = IORESOURCE_MEM, +}; + -+static struct platform_device compex_flash = { ++static struct platform_device compex42x_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { -+ .platform_data = &compex_flash_data, ++ .platform_data = &compex42x_flash_data, + }, + .num_resources = 1, -+ .resource = &compex_flash_resource, ++ .resource = &compex42x_flash_resource, +}; + -+static struct resource compex_uart_resources[] = { ++static struct resource compex42x_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, @@ -104,7 +97,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + } +}; + -+static struct plat_serial8250_port compex_uart_data[] = { ++static struct plat_serial8250_port compex42x_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, @@ -126,15 +119,15 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + { }, +}; + -+static struct platform_device compex_uart = { ++static struct platform_device compex42x_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, -+ .dev.platform_data = compex_uart_data, ++ .dev.platform_data = compex42x_uart_data, + .num_resources = 2, -+ .resource = compex_uart_resources, ++ .resource = compex42x_uart_resources, +}; + -+static struct eth_plat_info compex_plat_eth[] = { ++static struct eth_plat_info compex42x_plat_eth[] = { + { + .phy = IXP4XX_ETH_PHY_MAX_ADDR, + .phy_mask = 0xf0000, @@ -147,34 +140,34 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + } +}; + -+static struct platform_device compex_eth[] = { ++static struct platform_device compex42x_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, -+ .dev.platform_data = compex_plat_eth, ++ .dev.platform_data = compex42x_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, -+ .dev.platform_data = compex_plat_eth + 1, ++ .dev.platform_data = compex42x_plat_eth + 1, + } +}; + -+static struct platform_device *compex_devices[] __initdata = { -+ &compex_flash, -+ &compex_uart, -+ &compex_eth[0], -+ &compex_eth[1], ++static struct platform_device *compex42x_devices[] __initdata = { ++ &compex42x_flash, ++ &compex42x_uart, ++ &compex42x_eth[0], ++ &compex42x_eth[1], +}; + -+static void __init compex_init(void) ++static void __init compex42x_init(void) +{ + ixp4xx_sys_init(); + -+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ compex_flash_resource.end = ++ compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ compex42x_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + -+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); ++ platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices)); +} + +MACHINE_START(COMPEX, "Compex WP18 / NP18A") @@ -183,7 +176,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .atag_offset = 0x0100, -+ .init_machine = compex_init, ++ .init_machine = compex42x_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif @@ -197,18 +190,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> if (machine_is_ixdp425() || machine_is_ixcdp1100() || - machine_is_ixdp465() || machine_is_kixrp435()) + machine_is_ixdp465() || machine_is_kixrp435() || -+ machine_is_compex()) ++ machine_is_compex42x()) pci_common_init(&ixdp425_pci); return 0; } ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -1273,7 +1273,7 @@ oiab MACH_OIAB OIAB 1269 - smdk6400 MACH_SMDK6400 SMDK6400 1270 - nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 - greenphone MACH_GREENPHONE GREENPHONE 1272 --compex42x MACH_COMPEXWP18 COMPEXWP18 1273 -+compex MACH_COMPEX COMPEX 1273 - xmate MACH_XMATE XMATE 1274 - energizer MACH_ENERGIZER ENERGIZER 1275 - ime1 MACH_IME1 IME1 1276 |