summaryrefslogtreecommitdiff
path: root/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ixp4xx/patches-3.3/190-cambria_support.patch')
-rw-r--r--target/linux/ixp4xx/patches-3.3/190-cambria_support.patch1121
1 files changed, 0 insertions, 1121 deletions
diff --git a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
deleted file mode 100644
index 4eb1631..0000000
--- a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
+++ /dev/null
@@ -1,1121 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,79 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 6)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,992 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ * Tim Harvey <tharvey@gateworks.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/i2c/pca953x.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/irq.h>
-+
-+#include <mach/hardware.h>
-+#include <mach/gpio.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-+
-+struct cambria_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+#ifdef SFP_SERIALID
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
-+ .sda_pin = 113,
-+ .scl_pin = 112,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpa = {
-+ .name = "i2c-gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpa_data,
-+ },
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
-+ .sda_pin = 115,
-+ .scl_pin = 114,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpb = {
-+ .name = "i2c-gpio",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpb_data,
-+ },
-+};
-+#endif // #ifdef SFP_SERIALID
-+
-+static struct eth_plat_info cambria_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+ .phy = 2,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &cambria_npec_data,
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = &cambria_npea_data,
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+ {
-+ .name = "user",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user2",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user3",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user4",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct gpio cambria_gpios_gw2350[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "ARM_DIO0" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
-+#endif
-+ { 8, GPIOF_IN, "ARM_DIO8" },
-+ { 9, GPIOF_IN, "ARM_DIO9" },
-+};
-+
-+static struct gpio cambria_gpios_gw2358[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*VINLOW#" },
-+ { 2, GPIOF_IN, "*GPS_PPS" },
-+ { 3, GPIOF_IN, "*GPS_IRQ#" },
-+ { 4, GPIOF_IN, "*RS485_IRQ#" },
-+ { 5, GPIOF_IN, "*SER_EN#" },
-+ { 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+};
-+
-+static struct gpio cambria_gpios_gw2359[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+ { 11, GPIOF_OUT_INIT_HIGH, "*SER_EN" }, // console serial enable
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {103, GPIOF_OUT_INIT_HIGH, "*5V_EN" }, // 5V aux supply enable
-+ {108, GPIOF_IN, "*SMUXDA0" },
-+ {109, GPIOF_IN, "*SMUXDA1" },
-+ {110, GPIOF_IN, "*SMUXDA2" },
-+ {111, GPIOF_IN, "*SMUXDB0" },
-+ {112, GPIOF_IN, "*SMUXDB1" },
-+ {113, GPIOF_IN, "*SMUXDB2" },
-+ // PCA GPIO
-+ {118, GPIOF_IN, "*USIM2_DET#"}, // USIM2 Detect
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCI, 0=FP)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCI, 0=FP)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" }, // J21/J10
-+ {124, GPIOF_IN, "*COM1_DSR#" }, // J21/J10
-+ {127, GPIOF_IN, "PCA_DIO0" },
-+ {128, GPIOF_IN, "PCA_DIO1" },
-+ {129, GPIOF_IN, "PCA_DIO2" },
-+ {130, GPIOF_IN, "PCA_DIO3" },
-+ {131, GPIOF_IN, "PCA_DIO4" },
-+};
-+
-+static struct gpio cambria_gpios_gw2360[] = {
-+ // ARM GPIO
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {108, GPIOF_OUT_INIT_LOW, "*ENET1_EN#" }, // ENET1 TX Enable
-+ {109, GPIOF_IN, "*ENET1_PRES#" }, // ENET1 Detect (0=SFP present)
-+ {110, GPIOF_OUT_INIT_LOW, "*ENET2_EN#" }, // ENET2 TX Enable
-+ {111, GPIOF_IN, "*ENET2_PRES#"}, // ENET2 Detect (0=SFP present)
-+ // PCA GPIO
-+ {116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"}, // USIM2 Select (1=Loc, 0=Rem)
-+ {117, GPIOF_IN, "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
-+ {118, GPIOF_IN, "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCIe1, 0=J1)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCIe2, 0=J1)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {127, GPIOF_IN, "DIO0" },
-+ {128, GPIOF_IN, "DIO1" },
-+ {129, GPIOF_IN, "DIO2" },
-+ {130, GPIOF_IN, "DIO3" },
-+ {131, GPIOF_IN, "DIO4" },
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+ {
-+ .name = "ledA", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "ledB", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "ledC", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "ledD", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "ledE", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "ledF", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "ledG", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "ledH", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = cambria_latch_leds,
-+ .mem = 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+ {
-+ .start = 0xCD000000,
-+ .end = 0xCD000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 32,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+ {
-+ .start = 0xCE000000,
-+ .end = 0xCE000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 33,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct platform_device cambria_usb0_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 0,
-+ .resource = cambria_usb0_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+ .name = "ixp4xx-ehci",
-+ .id = 1,
-+ .resource = cambria_usb1_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .threshold = 2,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-buttons",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+};
-+
-+static int cambria_register_gpio(struct gpio *array, size_t num)
-+{
-+ int i, err, ret;
-+
-+ ret = 0;
-+ for (i = 0; i < num; i++, array++) {
-+ const char *label = array->label;
-+ if (label[0] == '*')
-+ label++;
-+ err = gpio_request_one(array->gpio, array->flags, label);
-+ if (err)
-+ ret = err;
-+ else {
-+ err = gpio_export(array->gpio, array->label[0] != '*');
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_pata);
-+
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
-+}
-+
-+static void __init cambria_gw2359_setup(void)
-+{
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ // CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
-+ cambria_npec_data.phy = 0x14;
-+#endif
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125; // PNLLED1#
-+ cambria_gpio_leds[1].gpio = 126; // PNLLED3#
-+ cambria_gpio_leds[2].gpio = 119; // PNLLED4#
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
-+}
-+
-+static void __init cambria_gw2360_setup(void)
-+{
-+ /* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
-+ * The chip-selects are expanded via a 3-to-8 decoder and CS2
-+ * and they are 8bit devices
-+ */
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ cambria_optional_uart_data[0].mapbase = 0x52000000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ cambria_optional_uart_data[0].uartclk = 18432000;
-+ cambria_optional_uart_data[0].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[1].mapbase = 0x52000008;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
-+ cambria_optional_uart_data[1].uartclk = 18432000;
-+ cambria_optional_uart_data[1].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[2].mapbase = 0x52000010;
-+ cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
-+ cambria_optional_uart_data[2].uartclk = 18432000;
-+ cambria_optional_uart_data[2].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO4;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[3].mapbase = 0x52000018;
-+ cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
-+ cambria_optional_uart_data[3].uartclk = 18432000;
-+ cambria_optional_uart_data[3].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO5;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[4].mapbase = 0x52000020;
-+ cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
-+ cambria_optional_uart_data[4].uartclk = 18432000;
-+ cambria_optional_uart_data[4].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[4].irq = IRQ_IXP4XX_GPIO8;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[5].mapbase = 0x52000028;
-+ cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
-+ cambria_optional_uart_data[5].uartclk = 18432000;
-+ cambria_optional_uart_data[5].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[5].irq = IRQ_IXP4XX_GPIO9;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[6].mapbase = 0x52000030;
-+ cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
-+ cambria_optional_uart_data[6].uartclk = 18432000;
-+ cambria_optional_uart_data[6].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[6].irq = IRQ_IXP4XX_GPIO10;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart.num_resources = 7,
-+ platform_device_register(&cambria_optional_uart);
-+
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+#endif
-+
-+ // disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
-+ //cambria_npec_data.noautoneg = 1; // disable autoneg
-+ cambria_npec_data.speed_10 = 0; // 100mbps
-+ cambria_npec_data.half_duplex = 0; // full-duplex
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125;
-+ cambria_gpio_leds[1].gpio = 126;
-+ cambria_gpio_leds[2].gpio = 119;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+#ifdef SFP_SERIALID
-+ /* the SFP modules each have an i2c bus for serial ident via GSC GPIO
-+ * To use these the i2c-gpio driver must be changed to use the _cansleep
-+ * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
-+ * use that anyway as it doesn't operate in an IRQ context).
-+ * Additionally the i2c-gpio module must set the gpio to output-high prior
-+ * to changing direction to an input to enable internal Pullups
-+ */
-+ platform_device_register(&cambria_i2c_gpio_sfpa);
-+ platform_device_register(&cambria_i2c_gpio_sfpb);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+ {
-+ .model = "GW2350",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2351",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2358",
-+ .setup = cambria_gw2358_setup,
-+ }, {
-+ .model = "GW2359",
-+ .setup = cambria_gw2359_setup,
-+ }, {
-+ .model = "GW2360",
-+ .setup = cambria_gw2360_setup,
-+ }, {
-+ .model = "GW2371",
-+ .setup = cambria_gw2358_setup,
-+ }
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+ struct cambria_board_info *info = &cambria_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ cambria_info = cambria_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct pca953x_platform_data cambria_pca_data = {
-+ .gpio_base = 100,
-+ .irq_base = -1,
-+};
-+
-+static struct pca953x_platform_data cambria_pca2_data = {
-+ .gpio_base = 116,
-+ .irq_base = -1,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &cambria_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x27),
-+ .platform_data = &cambria_pca2_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &cambria_eeprom_info
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
-+};
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+ if (!machine_is_cambria())
-+ return 0;
-+
-+ if (cambria_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+ cambria_info->model);
-+ cambria_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Cambria model number"
-+ " -- defaults will be used\n");
-+ cambria_gw23xx_setup();
-+ }
-+
-+ return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .atag_offset = 0x0100,
-+ .init_machine = cambria_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -222,7 +230,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -31,6 +32,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o