diff options
Diffstat (limited to 'target/linux/ixp4xx/patches/400-pronghorn_metro.patch')
| -rw-r--r-- | target/linux/ixp4xx/patches/400-pronghorn_metro.patch | 257 |
1 files changed, 0 insertions, 257 deletions
diff --git a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch deleted file mode 100644 index 035ccf6..0000000 --- a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch +++ /dev/null @@ -1,257 +0,0 @@ -Index: linux-2.6.21.7/Documentation/arm/IXP4xx -=================================================================== ---- linux-2.6.21.7.orig/Documentation/arm/IXP4xx -+++ linux-2.6.21.7/Documentation/arm/IXP4xx -@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo - the platform has two mini-PCI slots used for 802.11[bga] cards. - Finally, there is an IDE port hanging off the expansion bus. - -+ADI Engineering Pronghorn Metro Platform -+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85 -+ - Gateworks Avila Network Platform - http://www.gateworks.com/avila_sbc.htm - -Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig -=================================================================== ---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig -+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig -@@ -57,6 +57,14 @@ config MACH_WG302V2 - WG302 v2 or WAG302 v2 Access Points. For more information - on this platform, see http://openwrt.org - -+config MACH_PRONGHORNMETRO -+ bool "Pronghorn Metro" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support the ADI -+ Engineering Pronghorn Metro Platform. For more -+ information on this platform, see <file:Documentation/arm/IXP4xx>. -+ - config ARCH_IXDP425 - bool "IXDP425" - help -Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile -=================================================================== ---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile -+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile -@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10 - obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o -+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o - - obj-y += common.o - -@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se - obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o -+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c -@@ -0,0 +1,74 @@ -+/* -+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c -+ * -+ * PCI setup routines for ADI Engineering Pronghorn Metro -+ * -+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Softwrae, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/pci.h> -+ -+extern void ixp4xx_pci_preinit(void); -+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); -+ -+void __init pronghornmetro_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 13) -+ return IRQ_IXP4XX_GPIO4; -+ else if (slot == 14) -+ return IRQ_IXP4XX_GPIO6; -+ else if (slot == 15) -+ return IRQ_IXP4XX_GPIO11; -+ else if (slot == 16) -+ return IRQ_IXP4XX_GPIO1; -+ else return -1; -+} -+ -+struct hw_pci pronghornmetro_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = pronghornmetro_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = pronghornmetro_map_irq, -+}; -+ -+int __init pronghornmetro_pci_init(void) -+{ -+ if (machine_is_pronghorn_metro()) -+ pci_common_init(&pronghornmetro_pci); -+ return 0; -+} -+ -+subsys_initcall(pronghornmetro_pci_init); -Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c -@@ -0,0 +1,108 @@ -+/* -+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c -+ * -+ * Board setup for the ADI Engineering Pronghorn Metro -+ * -+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <Kaloz@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data pronghornmetro_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource pronghornmetro_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device pronghornmetro_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &pronghornmetro_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &pronghornmetro_flash_resource, -+}; -+ -+static struct resource pronghornmetro_uart_resource = { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port pronghornmetro_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device pronghornmetro_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = pronghornmetro_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &pronghornmetro_uart_resource, -+}; -+ -+static struct platform_device *pronghornmetro_devices[] __initdata = { -+ &pronghornmetro_flash, -+ &pronghornmetro_uart, -+}; -+ -+static void __init pronghornmetro_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); -+} -+ -+#ifdef CONFIG_MACH_PRONGHORNMETRO -+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = pronghornmetro_init, -+MACHINE_END -+#endif -Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h -=================================================================== ---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h -+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h -@@ -40,7 +40,7 @@ static __inline__ void __arch_decomp_set - /* - * Some boards are using UART2 as console - */ -- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2()) -+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; |