diff options
Diffstat (limited to 'target/linux/ixp4xx')
53 files changed, 11094 insertions, 0 deletions
diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile new file mode 100644 index 0000000..25b60a4 --- /dev/null +++ b/target/linux/ixp4xx/Makefile @@ -0,0 +1,24 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=armeb +BOARD:=ixp4xx +BOARDNAME:=Intel XScale IXP4xx +FEATURES:=squashfs + +LINUX_VERSION:=2.6.21.6 + +define Target/Description +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/ixp4xx/base-files/default/etc/config/network b/target/linux/ixp4xx/base-files/default/etc/config/network new file mode 100644 index 0000000..1d5ded3 --- /dev/null +++ b/target/linux/ixp4xx/base-files/default/etc/config/network @@ -0,0 +1,13 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/ixp4xx/config/default b/target/linux/ixp4xx/config/default new file mode 100644 index 0000000..81c1383 --- /dev/null +++ b/target/linux/ixp4xx/config/default @@ -0,0 +1,492 @@ +# CONFIG_8139TOO is not set +# CONFIG_AEABI is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +CONFIG_ARCH_IXCDP1100=y +CONFIG_ARCH_IXDP425=y +CONFIG_ARCH_IXDP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SHARK is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARM=y +# CONFIG_ARM_THUMB is not set +# CONFIG_ARPD is not set +# CONFIG_ARTHUR is not set +CONFIG_ATA=m +# CONFIG_ATA_GENERIC is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +# CONFIG_B44 is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BONDING is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_CIFS_STATS is not set +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit" +# CONFIG_CONFIGFS_FS is not set +CONFIG_CPU_32=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_XSCALE=y +CONFIG_CRC16=y +CONFIG_CRC_CCITT=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEFAULT_TCP_CONG="westwood" +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DEFAULT_WESTWOOD=y +CONFIG_DLCI=m +CONFIG_DLCI_COUNT=24 +CONFIG_DLCI_MAX=8 +# CONFIG_DM9000 is not set +CONFIG_DMABOUNCE=y +CONFIG_DNOTIFY=y +# CONFIG_DSCC4 is not set +# CONFIG_E100 is not set +# CONFIG_FARSYNC is not set +CONFIG_FIRMWARE_EDID=y +# CONFIG_FPE_FASTFPE is not set +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +CONFIG_FRAME_POINTER=y +# CONFIG_HAMRADIO is not set +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HDLC=m +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m +CONFIG_HDLC_RAW=m +# CONFIG_HDLC_RAW_ETH is not set +# CONFIG_HERMES is not set +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HID_FF is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_IXP4XX=y +CONFIG_HZ=100 +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_DEBUG_CORE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_IDE is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=m +CONFIG_INPUT_IXP4XX_BEEPER=m +# CONFIG_IP6_NF_MANGLE is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_SET is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TFTP is not set +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_IXP4XX_INDIRECT_PCI is not set +CONFIG_IXP4XX_MAC=y +CONFIG_IXP4XX_NPE=y +CONFIG_IXP4XX_NPE_FW_LOAD=y +CONFIG_IXP4XX_NPE_FW_MTD=y +CONFIG_IXP4XX_QMGR=y +CONFIG_IXP4XX_CRYPTO=y +CONFIG_IXP4XX_WATCHDOG=y +# CONFIG_IWMMXT is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFS_FS is not set +# CONFIG_KEXEC is not set +# CONFIG_LANMEDIA is not set +CONFIG_LEDS_IXP4XX=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LIBCRC32C is not set +# CONFIG_LLC2 is not set +CONFIG_MACH_AVILA=y +CONFIG_MACH_COMPEX=y +CONFIG_MACH_DSMG600=y +CONFIG_MACH_FSG=y +CONFIG_MACH_GATEWAY7001=y +# CONFIG_MACH_GTWX5715 is not set +# CONFIG_MACH_IXDP465 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_KIXRP435 is not set +CONFIG_MACH_LOFT=y +CONFIG_MACH_NAS100D=y +CONFIG_MACH_NSLU2=y +CONFIG_MACH_PRONGHORNMETRO=y +CONFIG_MACH_WG302V2=y +CONFIG_MACH_WRT300NV2=y +# CONFIG_MAC_PARTITION is not set +# CONFIG_MINIX_FS is not set +CONFIG_MINI_FO=y +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=n +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_OTP=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NVRAM is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +CONFIG_PATA_ARTOP=m +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +CONFIG_PATA_IXP4XX_CF=m +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PC300 is not set +# CONFIG_PCCARD is not set +# CONFIG_PCI200SYN is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_PM is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +# CONFIG_PRISM54 is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DEBUG is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +CONFIG_RTC_DRV_ISL1208=y +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_X1205=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_DS1621 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_W83627HF is not set +CONFIG_SENSORS_W83781D=y +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SHMEM is not set +CONFIG_SLHC=m +# CONFIG_SMB_FS is not set +# CONFIG_SMC91X is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SYN_COOKIES=y +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_SCALABLE is not set +CONFIG_TCP_CONG_VEGAS=m +# CONFIG_TCP_CONG_VENO is not set +CONFIG_TCP_CONG_WESTWOOD=y +CONFIG_TINY_SHMEM=y +CONFIG_UID16=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USBPCWATCHDOG is not set +CONFIG_USB_BANDWIDTH=y +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_GTCO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_UHCI_HCD=m +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VIA_RHINE is not set +CONFIG_VIA_VELOCITY=m +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WAN=y +# CONFIG_WANXL is not set +# CONFIG_XFS_FS is not set +# CONFIG_XIP_KERNEL is not set +CONFIG_XSCALE_PMU=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/target/linux/ixp4xx/config/profile-FSG3 b/target/linux/ixp4xx/config/profile-FSG3 new file mode 100644 index 0000000..3d8d1ce --- /dev/null +++ b/target/linux/ixp4xx/config/profile-FSG3 @@ -0,0 +1,21 @@ +CONFIG_CMDLINE="root=/dev/sda1 noinitrd console=ttyS0,115200" +CONFIG_ATA=y +CONFIG_SATA_VIA=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_STORAGE=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +CONFIG_BLK_DEV_SD=y diff --git a/target/linux/ixp4xx/image/Config.in b/target/linux/ixp4xx/image/Config.in new file mode 100644 index 0000000..ef5aed4 --- /dev/null +++ b/target/linux/ixp4xx/image/Config.in @@ -0,0 +1,10 @@ +config IXP4XX_INCLUDE_UCODE + bool "Build images with Intel IXP4xx Microcode" + depends LINUX_2_6_IXP4XX + default y + help + You must manually download IPL_ixp400NpeLibrary-2_4.zip from + http://www.intel.com/design/network/products/npfamily/ixp400_archives.htm + and put it in the dl/ directory of the build system. + You will need to agree to the Intel Public License to do so - please do read it! + diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile new file mode 100644 index 0000000..70ff0eb --- /dev/null +++ b/target/linux/ixp4xx/image/Makefile @@ -0,0 +1,85 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +UCODEFILE:=IPL_ixp400NpeLibrary-2_4.zip + +ifneq ($(CONFIG_IXP4XX_INCLUDE_UCODE),) + define Require/npe-ucode + [ -f $(DL_DIR)/$(UCODEFILE) ] + endef + define Build/Compile/npe + $(MAKE) -C npe-ucode \ + BUILD_DIR="$(KDIR)" \ + TARGET="$(KDIR)" \ + compile + endef + define Image/Build/slug + BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \ + -L $(KDIR)/apex-nslu2-armeb.bin -m $(KDIR)/NPE-B \ + -k $(BIN_DIR)/openwrt-nslu2-$(KERNEL)-zImage \ + -r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img \ + -p -o $(BIN_DIR)/openwrt-nslu2-$(KERNEL)-$(1).bin + BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \ + -F -L $(KDIR)/apex-nslu2-armeb.bin -m $(KDIR)/NPE-B \ + -k $(BIN_DIR)/openwrt-nslu2-$(KERNEL)-zImage \ + -r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img \ + -p -o $(BIN_DIR)/openwrt-nslu2-$(KERNEL)-$(1)-16mb.bin + endef +endif + +define Build/Compile + $(MAKE) -C apex \ + BUILD_DIR="$(KDIR)" \ + TARGET="$(KDIR)" \ + compile + $(call Build/Compile/npe) +endef + +define Build/Clean + $(MAKE) -C apex clean + $(MAKE) -C npe-ucode clean +endef + +define Image/Prepare + cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage +endef + +define Image/BuildKernel + cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-zImage +# $(shell BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh) + BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) +endef + +define Image/Build/jffs2-64k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=65536 conv=sync +endef + +define Image/Build/jffs2-128k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=131072 conv=sync + $(call Image/Build/slug,$(1)) +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=131072 conv=sync + $(call Image/Build/slug,$(1)) +endef + +$(eval $(call BuildImage)) + +$(eval $(call Require,npe-ucode, \ + You must manually download $(UCODEFILE) from \\\ + http://www.intel.com/design/network/products/npfamily/ixp400_archives.htm \\\ + and put it in $(DL_DIR). \\\ + You will need to agree to the Intel Public License to do so - please do read it! \ +)) diff --git a/target/linux/ixp4xx/image/apex/Makefile b/target/linux/ixp4xx/image/apex/Makefile new file mode 100644 index 0000000..759a4ef --- /dev/null +++ b/target/linux/ixp4xx/image/apex/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=apex +PKG_VERSION:=1.5.8 +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_SOURCE_URL:=ftp://ftp.buici.com/pub/apex/ \ + ftp://metalab.unc.edu/pub/Linux/system/boot/apex/ +PKG_MD5SUM:=bb96cc8d50b4f00ee653f0800643ea8a + +include $(INCLUDE_DIR)/package.mk + +define Build/Configure + $(MAKE) -C $(PKG_BUILD_DIR) \ + ARCH=arm \ + slugos-nslu2-armeb_config +endef + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(TARGET_CONFIGURE_OPTS) \ + ARCH=arm \ + all +endef + +define Build/InstallDev + $(INSTALL_BIN) $(PKG_BUILD_DIR)/apex.bin $(TARGET)/apex-nslu2-armeb.bin +endef + +$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/ixp4xx/image/apex/patches/100-slugos-nslu2-armeb_config.patch b/target/linux/ixp4xx/image/apex/patches/100-slugos-nslu2-armeb_config.patch new file mode 100644 index 0000000..34cb2a2 --- /dev/null +++ b/target/linux/ixp4xx/image/apex/patches/100-slugos-nslu2-armeb_config.patch @@ -0,0 +1,20 @@ +--- apex-1.5.6/src/mach-ixp42x/slugos-nslu2-armeb_config 2007-06-02 10:06:45.000000000 +0930 ++++ apex-1.5.6/src/mach-ixp42x/slugos-nslu2-armeb_config~ 2007-06-03 02:22:18.000000000 +0930 +@@ -17,7 +17,7 @@ + # + # General Setup + # +-CONFIG_TARGET_DESCRIPTION="SlugOS NSLU2 (bigendian)" ++CONFIG_TARGET_DESCRIPTION="OpenWRT NSLU2 (bigendian)" + CONFIG_CROSS_COMPILE="" + CONFIG_CC_OPTIMIZE_FOR_SIZE=y + # CONFIG_CC_OPTIMIZE_FOR_SPEED is not set +@@ -143,7 +143,7 @@ + # Overrides + # + CONFIG_ENV_DEFAULT_CMDLINE_OVERRIDE=y +-CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=jffs2 console=ttyS0,115200" ++CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd" + # CONFIG_ENV_DEFAULT_STARTUP_OVERRIDE is not set + CONFIG_USES_NOR_BOOTFLASH=y + CONFIG_RELOCATE_SIMPLE=y diff --git a/target/linux/ixp4xx/image/npe-ucode/Makefile b/target/linux/ixp4xx/image/npe-ucode/Makefile new file mode 100644 index 0000000..b5181e8 --- /dev/null +++ b/target/linux/ixp4xx/image/npe-ucode/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=npe-ucode +PKG_VERSION:=2.4 +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE:=IPL_ixp400NpeLibrary-2_4.zip + +include $(INCLUDE_DIR)/package.mk + +define Build/Prepare + rm -rf $(PKG_BUILD_DIR) + mkdir -p $(PKG_BUILD_DIR) + unzip -d $(PKG_BUILD_DIR)/ $(DL_DIR)/$(PKG_SOURCE) + mv $(PKG_BUILD_DIR)/ixp400_xscale_sw/src/npeDl/IxNpeMicrocode.c $(PKG_BUILD_DIR)/ + rm -rf $(PKG_BUILD_DIR)/ixp400_xscale_sw + $(CP) ./src/* $(PKG_BUILD_DIR)/ +endef + +define Build/Compile + (cd $(PKG_BUILD_DIR); \ + $(HOSTCC) -Wall IxNpeMicrocode.c -o IxNpeMicrocode; \ + ./IxNpeMicrocode -be \ + ) +endef + +define Build/InstallDev + $(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-B $(TARGET)/ +endef + +$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h b/target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h new file mode 100644 index 0000000..1c3d1ff --- /dev/null +++ b/target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h @@ -0,0 +1,143 @@ +/* + * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file + * + * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> + * + * This file is released under the GPLv2 + * + * + * compile with + * + * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode + * + * Executing the resulting binary on your build-host creates the + * "NPE-[ABC].xxxxxxxx" files containing the selected microcode + * + * fetch the IxNpeMicrocode.c from the Intel Access Library. + * It will include this header. + * + * select Images for every NPE from the following + * (used C++ comments for easy uncommenting ....) + */ + +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS +// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL +// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT +// #define IX_NPEDL_NPEIMAGE_NPEA_DMA +// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT +// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT +// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT +// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0 +// #define IX_NPEDL_NPEIMAGE_NPEA_WEP + + +// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEB_DMA +// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS +#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL + + +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB +// #define IX_NPEDL_NPEIMAGE_NPEC_DMA +// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN +// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL +#define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH +// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS +// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL + + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <netinet/in.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#include <endian.h> +#include <byteswap.h> +#include <string.h> + +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define to_le32(x) (x) +#define to_be32(x) bswap_32(x) +#else +#define to_be32(x) (x) +#define to_le32(x) bswap_32(x) +#endif + +struct dl_image { + unsigned magic; + unsigned id; + unsigned size; + unsigned data[0]; +}; + +const unsigned IxNpeMicrocode_array[]; + +int main(int argc, char *argv[]) +{ + struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array; + int imgsiz, i, fd, cnt; + const unsigned *arrayptr = IxNpeMicrocode_array; + const char *names[] = { "IXP425", "IXP465", "unknown" }; + int bigendian = 1; + + if (argc > 1) { + if (!strcmp(argv[1], "-le")) + bigendian = 0; + else if (!strcmp(argv[1], "-be")) + bigendian = 1; + else { + printf("Usage: %s <-le|-be>\n", argv[0]); + return EXIT_FAILURE; + } + } + + for (image = (struct dl_image *)arrayptr, cnt=0; + (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d); + image = (struct dl_image *)(arrayptr), cnt++) + { + unsigned char field[4]; + imgsiz = image->size + 3; + *(unsigned*)field = to_be32(image->id); + char filename[40], slnk[10]; + + sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A', + image->id); + sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A'); + printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x " + "Size: %5d to: '%s'\n", + names[field[0] >> 4], (field[0] & 0xf) + 'A', + field[1], field[2], field[3], imgsiz*4, filename); + fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644); + if (fd >= 0) { + for (i=0; i<imgsiz; i++) { + *(unsigned*)field = bigendian ? + to_be32(arrayptr[i]) : + to_le32(arrayptr[i]); + write(fd, field, sizeof(field)); + } + close(fd); + unlink(slnk); + symlink(filename, slnk); + } else { + perror(filename); + } + arrayptr += imgsiz; + } + close(fd); + return 0; +} diff --git a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch new file mode 100644 index 0000000..b214ef2 --- /dev/null +++ b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch @@ -0,0 +1,551 @@ +This patch adds support for the D-Link DSM-G600 Rev A. +This is an ARM XScale IXP4xx system relatively similar to +the NSLU2 and NAS-100D already supported by mainline. An +important difference is Gigabit Ethernet support using +the Via Velocity chipset. + +This patch is the combined work of Michael Westerhof and +Alessandro Zummo, with contributions from Michael-Luke +Jones. This version addresses review comments from rmk +and Deepak Saxena. + +Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> +Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> +Signed-off-by: Michael Westerhof <mwester@dls.net> + +--- + arch/arm/mach-ixp4xx/Kconfig | 9 + + arch/arm/mach-ixp4xx/Makefile | 2 + arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 +++++++++++++ + arch/arm/mach-ixp4xx/dsmg600-power.c | 130 ++++++++++++++++++++++++ + arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 +++++++++++++++++++++++++++++++++ + include/asm-arm/arch-ixp4xx/dsmg600.h | 57 ++++++++++ + include/asm-arm/arch-ixp4xx/hardware.h | 1 + include/asm-arm/arch-ixp4xx/irqs.h | 10 + + 8 files changed, 458 insertions(+) + +Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig +=================================================================== +--- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Kconfig ++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig +@@ -89,6 +89,15 @@ + NAS 100d device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/NAS100d/HomePage + ++config MACH_DSMG600 ++ bool ++ prompt "D-Link DSM-G600 RevA" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support D-Link's ++ DSM-G600 RevA device. For more information on this platform, ++ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage ++ + # + # Avila and IXDP share the same source for now. Will change in future + # +Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile +=================================================================== +--- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Makefile ++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile +@@ -12,6 +12,7 @@ + obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o + obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o + obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o ++obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o + + obj-y += common.o + +@@ -22,5 +23,6 @@ + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o + obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o ++obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c +=================================================================== +--- /dev/null ++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c +@@ -0,0 +1,74 @@ ++/* ++ * DSM-G600 board-level PCI initialization ++ * ++ * Copyright (C) 2006 Tower Technologies ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach/pci.h> ++#include <asm/mach-types.h> ++ ++void __init dsmg600_pci_preinit(void) ++{ ++ set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); ++ set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); ++ set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); ++ set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); ++ set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); ++ set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] = ++ { ++ { IRQ_DSMG600_PCI_INTE, -1, -1 }, ++ { IRQ_DSMG600_PCI_INTA, -1, -1 }, ++ { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD }, ++ { IRQ_DSMG600_PCI_INTF, -1, -1 }, ++ }; ++ ++ int irq = -1; ++ ++ if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV && ++ pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES) ++ irq = pci_irq_table[slot-1][pin-1]; ++ ++ return irq; ++} ++ ++struct hw_pci __initdata dsmg600_pci = { ++ .nr_controllers = 1, ++ .preinit = dsmg600_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = dsmg600_map_irq, ++}; ++ ++int __init dsmg600_pci_init(void) ++{ ++ if (machine_is_dsmg600()) ++ pci_common_init(&dsmg600_pci); ++ ++ return 0; ++} ++ ++subsys_initcall(dsmg600_pci_init); +Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c +=================================================================== +--- /dev/null ++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c +@@ -0,0 +1,130 @@ ++/* ++ * arch/arm/mach-ixp4xx/dsmg600-power.c ++ * ++ * DSM-G600 Power/Reset driver ++ * Author: Michael Westerhof <mwester@dls.net> ++ * ++ * Based on nslu2-power.c ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * ++ * which was based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/reboot.h> ++#include <linux/interrupt.h> ++#include <linux/irq.h> ++#include <linux/jiffies.h> ++#include <linux/timer.h> ++ ++#include <asm/mach-types.h> ++ ++extern void ctrl_alt_del(void); ++ ++/* This is used to make sure the power-button pusher is serious. The button ++ * must be held until the value of this counter reaches zero. ++ */ ++static volatile int power_button_countdown; ++ ++/* Must hold the button down for at least this many counts to be processed */ ++#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ ++ ++static void dsmg600_power_handler(unsigned long data); ++static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); ++ ++static void dsmg600_power_handler(unsigned long data) ++{ ++ /* This routine is called twice per second to check the ++ * state of the power button. ++ */ ++ ++ if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) { ++ ++ /* IO Pin is 1 (button pushed) */ ++ if (power_button_countdown > 0) { ++ power_button_countdown--; ++ } ++ ++ } else { ++ ++ /* Done on button release, to allow for auto-power-on mods. */ ++ if (power_button_countdown == 0) { ++ /* Signal init to do the ctrlaltdel action, this will bypass ++ * init if it hasn't started and do a kernel_restart. ++ */ ++ ctrl_alt_del(); ++ ++ /* Change the state of the power LED to "blink" */ ++ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); ++ } else { ++ power_button_countdown = PBUTTON_HOLDDOWN_COUNT; ++ } ++ } ++ ++ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); ++} ++ ++static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) ++{ ++ /* This is the paper-clip reset, it shuts the machine down directly. */ ++ machine_power_off(); ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init dsmg600_power_init(void) ++{ ++ if (!(machine_is_dsmg600())) ++ return 0; ++ ++ if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler, ++ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button", ++ NULL) < 0) { ++ ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", ++ DSMG600_RB_IRQ); ++ ++ return -EIO; ++ } ++ ++ /* The power button on the D-Link DSM-G600 is on GPIO 15, but ++ * it cannot handle interrupts on that GPIO line. So we'll ++ * have to poll it with a kernel timer. ++ */ ++ ++ /* Make sure that the power button GPIO is set up as an input */ ++ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); ++ ++ /* Set the initial value for the power button IRQ handler */ ++ power_button_countdown = PBUTTON_HOLDDOWN_COUNT; ++ ++ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); ++ ++ return 0; ++} ++ ++static void __exit dsmg600_power_exit(void) ++{ ++ if (!(machine_is_dsmg600())) ++ return; ++ ++ del_timer_sync(&dsmg600_power_timer); ++ ++ free_irq(DSMG600_RB_IRQ, NULL); ++} ++ ++module_init(dsmg600_power_init); ++module_exit(dsmg600_power_exit); ++ ++MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>"); ++MODULE_DESCRIPTION("DSM-G600 Power/Reset driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c +=================================================================== +--- /dev/null ++++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c +@@ -0,0 +1,175 @@ ++/* ++ * DSM-G600 board-setup ++ * ++ * Copyright (C) 2006 Tower Technologies ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/serial.h> ++#include <linux/serial_8250.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data dsmg600_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource dsmg600_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device dsmg600_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev.platform_data = &dsmg600_flash_data, ++ .num_resources = 1, ++ .resource = &dsmg600_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = { ++ .sda_pin = DSMG600_SDA_PIN, ++ .scl_pin = DSMG600_SCL_PIN, ++}; ++ ++static struct platform_device dsmg600_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev.platform_data = &dsmg600_i2c_gpio_pins, ++}; ++ ++#ifdef CONFIG_LEDS_CLASS ++static struct resource dsmg600_led_resources[] = { ++ { ++ .name = "power", ++ .start = DSMG600_LED_PWR_GPIO, ++ .end = DSMG600_LED_PWR_GPIO, ++ .flags = IXP4XX_GPIO_HIGH, ++ }, ++ { ++ .name = "wlan", ++ .start = DSMG600_LED_WLAN_GPIO, ++ .end = DSMG600_LED_WLAN_GPIO, ++ .flags = IXP4XX_GPIO_LOW, ++ }, ++}; ++ ++static struct platform_device dsmg600_leds = { ++ .name = "IXP4XX-GPIO-LED", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(dsmg600_led_resources), ++ .resource = dsmg600_led_resources, ++}; ++#endif ++ ++static struct resource dsmg600_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct plat_serial8250_port dsmg600_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { } ++}; ++ ++static struct platform_device dsmg600_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = dsmg600_uart_data, ++ .num_resources = ARRAY_SIZE(dsmg600_uart_resources), ++ .resource = dsmg600_uart_resources, ++}; ++ ++static struct platform_device *dsmg600_devices[] __initdata = { ++ &dsmg600_i2c_controller, ++ &dsmg600_flash, ++}; ++ ++static void dsmg600_power_off(void) ++{ ++ /* enable the pwr cntl gpio */ ++ gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT); ++ ++ /* poweroff */ ++ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); ++} ++ ++static void __init dsmg600_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ /* Make sure that GPIO14 and GPIO15 are not used as clocks */ ++ *IXP4XX_GPIO_GPCLKR = 0; ++ ++ dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ dsmg600_flash_resource.end = ++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; ++ ++ pm_power_off = dsmg600_power_off; ++ ++ /* The UART is required on the DSM-G600 (Redboot cannot use the ++ * NIC) -- do it here so that it does *not* get removed if ++ * platform_add_devices fails! ++ */ ++ (void)platform_device_register(&dsmg600_uart); ++ ++ platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); ++ ++#ifdef CONFIG_LEDS_CLASS ++ /* We don't care whether or not this works. */ ++ (void)platform_device_register(&dsmg600_leds); ++#endif ++} ++ ++static void __init dsmg600_fixup(struct machine_desc *desc, ++ struct tag *tags, char **cmdline, struct meminfo *mi) ++{ ++ /* The xtal on this machine is non-standard. */ ++ ixp4xx_timer_freq = DSMG600_FREQ; ++} ++ ++MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") ++ /* Maintainer: www.nslu2-linux.org */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, ++ .boot_params = 0x00000100, ++ .fixup = dsmg600_fixup, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .init_machine = dsmg600_init, ++MACHINE_END +Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h +=================================================================== +--- /dev/null ++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h +@@ -0,0 +1,57 @@ ++/* ++ * DSM-G600 platform specific definitions ++ * ++ * Copyright (C) 2006 Tower Technologies ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * ++ * based on ixdp425.h: ++ * Copyright 2004 (C) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include <asm/hardware.h>" ++#endif ++ ++#define DSMG600_SDA_PIN 5 ++#define DSMG600_SCL_PIN 4 ++ ++/* ++ * DSMG600 PCI IRQs ++ */ ++#define DSMG600_PCI_MAX_DEV 4 ++#define DSMG600_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define DSMG600_PCI_INTA_PIN 11 ++#define DSMG600_PCI_INTB_PIN 10 ++#define DSMG600_PCI_INTC_PIN 9 ++#define DSMG600_PCI_INTD_PIN 8 ++#define DSMG600_PCI_INTE_PIN 7 ++#define DSMG600_PCI_INTF_PIN 6 ++ ++/* DSM-G600 Timer Setting */ ++#define DSMG600_FREQ 66000000 ++ ++/* Buttons */ ++ ++#define DSMG600_PB_GPIO 15 /* power button */ ++#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO) ++ ++#define DSMG600_RB_GPIO 3 /* reset button */ ++ ++#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3 ++ ++#define DSMG600_PO_GPIO 2 /* power off */ ++ ++/* LEDs */ ++ ++#define DSMG600_LED_PWR_GPIO 0 ++#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO) ++ ++#define DSMG600_LED_WLAN_GPIO 14 ++#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO) +Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h +=================================================================== +--- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h ++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h +@@ -47,5 +47,6 @@ + #include "prpmc1100.h" + #include "nslu2.h" + #include "nas100d.h" ++#include "dsmg600.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h +=================================================================== +--- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h ++++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h +@@ -118,4 +118,14 @@ + #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 + #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 + ++/* ++ * D-Link DSM-G600 RevA board IRQs ++ */ ++#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9 ++#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8 ++#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 ++#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 ++ + #endif diff --git a/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch b/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch new file mode 100644 index 0000000..5b406a7 --- /dev/null +++ b/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch @@ -0,0 +1,131 @@ +This patch is required as the frequency fixup in nslu2_init does not +run sufficiently early in the boot sequence to take effect. In +addition the dsmg600 setup code behaviour has been improved such +that a 'fixup' routine is avoided. + +Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> + +Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:05:40.000000000 -0700 ++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:15:56.000000000 -0700 +@@ -22,6 +22,7 @@ + #include <asm/mach-types.h> + #include <asm/mach/arch.h> + #include <asm/mach/flash.h> ++#include <asm/mach/time.h> + + static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", +@@ -157,10 +158,21 @@ + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); + } + +-static void __init nslu2_init(void) ++static void __init nslu2_timer_init(void) + { +- ixp4xx_timer_freq = NSLU2_FREQ; ++ /* The xtal on this machine is non-standard. */ ++ ixp4xx_timer_freq = NSLU2_FREQ; ++ ++ /* Call standard timer_init function. */ ++ ixp4xx_timer_init(); ++} + ++static struct sys_timer nslu2_timer = { ++ .init = nslu2_timer_init, ++}; ++ ++static void __init nslu2_init(void) ++{ + ixp4xx_sys_init(); + + nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); +@@ -185,6 +197,6 @@ + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, +- .timer = &ixp4xx_timer, ++ .timer = &nslu2_timer, + .init_machine = nslu2_init, + MACHINE_END +Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c +=================================================================== +--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:05:40.000000000 -0700 ++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:15:16.000000000 -0700 +@@ -269,7 +269,7 @@ + .handler = ixp4xx_timer_interrupt, + }; + +-static void __init ixp4xx_timer_init(void) ++void __init ixp4xx_timer_init(void) + { + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; +Index: linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h +=================================================================== +--- linux-2.6.21-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:05:40.000000000 -0700 ++++ linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:15:16.000000000 -0700 +@@ -113,6 +113,7 @@ + extern void ixp4xx_map_io(void); + extern void ixp4xx_init_irq(void); + extern void ixp4xx_sys_init(void); ++extern void ixp4xx_timer_init(void); + extern struct sys_timer ixp4xx_timer; + extern void ixp4xx_pci_preinit(void); + struct pci_sys_data; +Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c +=================================================================== +--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:05:42.000000000 -0700 ++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:16:07.000000000 -0700 +@@ -18,6 +18,7 @@ + #include <asm/mach-types.h> + #include <asm/mach/arch.h> + #include <asm/mach/flash.h> ++#include <asm/mach/time.h> + + static struct flash_platform_data dsmg600_flash_data = { + .map_name = "cfi_probe", +@@ -128,6 +129,19 @@ + gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); + } + ++static void __init dsmg600_timer_init(void) ++{ ++ /* The xtal on this machine is non-standard. */ ++ ixp4xx_timer_freq = DSMG600_FREQ; ++ ++ /* Call standard timer_init function. */ ++ ixp4xx_timer_init(); ++} ++ ++static struct sys_timer dsmg600_timer = { ++ .init = dsmg600_timer_init, ++}; ++ + static void __init dsmg600_init(void) + { + ixp4xx_sys_init(); +@@ -155,21 +169,13 @@ + #endif + } + +-static void __init dsmg600_fixup(struct machine_desc *desc, +- struct tag *tags, char **cmdline, struct meminfo *mi) +-{ +- /* The xtal on this machine is non-standard. */ +- ixp4xx_timer_freq = DSMG600_FREQ; +-} +- + MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, +- .fixup = dsmg600_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, +- .timer = &ixp4xx_timer, ++ .timer = &dsmg600_timer, + .init_machine = dsmg600_init, + MACHINE_END diff --git a/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch b/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch new file mode 100644 index 0000000..f0bfcde --- /dev/null +++ b/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch @@ -0,0 +1,196 @@ +This trivial patch updates the nslu2 and nas-100d headers to +remove pointless GPIO defines, and updates nslu2-setup.c +accordingly. In addition minor style cleanups to some comments +are included. + +Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> + +Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:43.000000000 -0700 ++++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:46.000000000 -0700 +@@ -50,26 +50,26 @@ + static struct resource nslu2_led_resources[] = { + { + .name = "ready", /* green led */ +- .start = NSLU2_LED_GRN, +- .end = NSLU2_LED_GRN, ++ .start = NSLU2_LED_GRN_GPIO, ++ .end = NSLU2_LED_GRN_GPIO, + .flags = IXP4XX_GPIO_HIGH, + }, + { + .name = "status", /* red led */ +- .start = NSLU2_LED_RED, +- .end = NSLU2_LED_RED, ++ .start = NSLU2_LED_RED_GPIO, ++ .end = NSLU2_LED_RED_GPIO, + .flags = IXP4XX_GPIO_HIGH, + }, + { + .name = "disk-1", +- .start = NSLU2_LED_DISK1, +- .end = NSLU2_LED_DISK1, ++ .start = NSLU2_LED_DISK1_GPIO, ++ .end = NSLU2_LED_DISK1_GPIO, + .flags = IXP4XX_GPIO_LOW, + }, + { + .name = "disk-2", +- .start = NSLU2_LED_DISK2, +- .end = NSLU2_LED_DISK2, ++ .start = NSLU2_LED_DISK2_GPIO, ++ .end = NSLU2_LED_DISK2_GPIO, + .flags = IXP4XX_GPIO_LOW, + }, + }; +@@ -181,7 +181,8 @@ + + pm_power_off = nslu2_power_off; + +- /* This is only useful on a modified machine, but it is valuable ++ /* ++ * This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ +Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h +=================================================================== +--- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:43.000000000 -0700 ++++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:46.000000000 -0700 +@@ -9,7 +9,7 @@ + * based on ixdp425.h: + * Copyright 2004 (c) MontaVista, Software, Inc. + * +- * This file is licensed under the terms of the GNU General Public ++ * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +@@ -34,36 +34,14 @@ + #define NSLU2_PCI_INTC_PIN 9 + #define NSLU2_PCI_INTD_PIN 8 + +- + /* NSLU2 Timer */ + #define NSLU2_FREQ 66000000 +-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) +- +-/* GPIO */ +- +-#define NSLU2_GPIO0 0 +-#define NSLU2_GPIO1 1 +-#define NSLU2_GPIO2 2 +-#define NSLU2_GPIO3 3 +-#define NSLU2_GPIO4 4 +-#define NSLU2_GPIO5 5 +-#define NSLU2_GPIO6 6 +-#define NSLU2_GPIO7 7 +-#define NSLU2_GPIO8 8 +-#define NSLU2_GPIO9 9 +-#define NSLU2_GPIO10 10 +-#define NSLU2_GPIO11 11 +-#define NSLU2_GPIO12 12 +-#define NSLU2_GPIO13 13 +-#define NSLU2_GPIO14 14 +-#define NSLU2_GPIO15 15 + + /* Buttons */ + +-#define NSLU2_PB_GPIO NSLU2_GPIO5 +-#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ +-#define NSLU2_RB_GPIO NSLU2_GPIO12 ++#define NSLU2_PB_GPIO 5 ++#define NSLU2_PO_GPIO 8 /* power off */ ++#define NSLU2_RB_GPIO 12 + + #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 + #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 +@@ -79,16 +57,16 @@ + + /* LEDs */ + +-#define NSLU2_LED_RED NSLU2_GPIO0 +-#define NSLU2_LED_GRN NSLU2_GPIO1 ++#define NSLU2_LED_RED_GPIO 0 ++#define NSLU2_LED_GRN_GPIO 1 + +-#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) +-#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) ++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) ++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) + +-#define NSLU2_LED_DISK1 NSLU2_GPIO3 +-#define NSLU2_LED_DISK2 NSLU2_GPIO2 ++#define NSLU2_LED_DISK1_GPIO 3 ++#define NSLU2_LED_DISK2_GPIO 2 + +-#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) +-#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) ++#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) ++#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) + + +Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h +=================================================================== +--- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h 2007-04-25 20:08:32.000000000 -0700 ++++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h 2007-05-09 07:34:14.000000000 -0700 +@@ -10,7 +10,7 @@ + * based on ixdp425.h: + * Copyright 2004 (c) MontaVista, Software, Inc. + * +- * This file is licensed under the terms of the GNU General Public ++ * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +@@ -36,31 +36,11 @@ + #define NAS100D_PCI_INTD_PIN 8 + #define NAS100D_PCI_INTE_PIN 7 + +-/* GPIO */ +- +-#define NAS100D_GPIO0 0 +-#define NAS100D_GPIO1 1 +-#define NAS100D_GPIO2 2 +-#define NAS100D_GPIO3 3 +-#define NAS100D_GPIO4 4 +-#define NAS100D_GPIO5 5 +-#define NAS100D_GPIO6 6 +-#define NAS100D_GPIO7 7 +-#define NAS100D_GPIO8 8 +-#define NAS100D_GPIO9 9 +-#define NAS100D_GPIO10 10 +-#define NAS100D_GPIO11 11 +-#define NAS100D_GPIO12 12 +-#define NAS100D_GPIO13 13 +-#define NAS100D_GPIO14 14 +-#define NAS100D_GPIO15 15 +- +- + /* Buttons */ + +-#define NAS100D_PB_GPIO NAS100D_GPIO14 +-#define NAS100D_RB_GPIO NAS100D_GPIO4 +-#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ ++#define NAS100D_PB_GPIO 14 ++#define NAS100D_RB_GPIO 4 ++#define NAS100D_PO_GPIO 12 /* power off */ + + #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 + #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 +Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:32:43.000000000 -0700 ++++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:34:55.000000000 -0700 +@@ -155,7 +155,8 @@ + + pm_power_off = nas100d_power_off; + +- /* This is only useful on a modified machine, but it is valuable ++ /* ++ * This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ diff --git a/target/linux/ixp4xx/patches/100-npe_driver.patch b/target/linux/ixp4xx/patches/100-npe_driver.patch new file mode 100644 index 0000000..78fb119 --- /dev/null +++ b/target/linux/ixp4xx/patches/100-npe_driver.patch @@ -0,0 +1,4881 @@ +diff --git a/Documentation/networking/ixp4xx/IxNpeMicrocode.h b/Documentation/networking/ixp4xx/IxNpeMicrocode.h +new file mode 100644 +index 0000000..e5a4bd3 +Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,143 @@ ++/* ++ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ * ++ * ++ * compile with ++ * ++ * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode ++ * ++ * Executing the resulting binary on your build-host creates the ++ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode ++ * ++ * fetch the IxNpeMicrocode.c from the Intel Access Library. ++ * It will include this header. ++ * ++ * select Images for every NPE from the following ++ * (used C++ comments for easy uncommenting ....) ++ */ ++ ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS ++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL ++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT ++// #define IX_NPEDL_NPEIMAGE_NPEA_DMA ++// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT ++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT ++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT ++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0 ++// #define IX_NPEDL_NPEIMAGE_NPEA_WEP ++ ++ ++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB ++//#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEB_DMA ++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV ++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS ++ #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL ++ ++ ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB ++// #define IX_NPEDL_NPEIMAGE_NPEC_DMA ++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN ++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL ++ #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH ++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS ++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL ++ ++ ++#include <stdio.h> ++#include <unistd.h> ++#include <stdlib.h> ++#include <netinet/in.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <fcntl.h> ++#include <errno.h> ++#include <endian.h> ++#include <byteswap.h> ++#include <string.h> ++ ++#if __BYTE_ORDER == __LITTLE_ENDIAN ++#define to_le32(x) (x) ++#define to_be32(x) bswap_32(x) ++#else ++#define to_be32(x) (x) ++#define to_le32(x) bswap_32(x) ++#endif ++ ++struct dl_image { ++ unsigned magic; ++ unsigned id; ++ unsigned size; ++ unsigned data[0]; ++}; ++ ++const unsigned IxNpeMicrocode_array[]; ++ ++int main(int argc, char *argv[]) ++{ ++ struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array; ++ int imgsiz, i, fd, cnt; ++ const unsigned *arrayptr = IxNpeMicrocode_array; ++ const char *names[] = { "IXP425", "IXP465", "unknown" }; ++ int bigendian = 1; ++ ++ if (argc > 1) { ++ if (!strcmp(argv[1], "-le")) ++ bigendian = 0; ++ else if (!strcmp(argv[1], "-be")) ++ bigendian = 1; ++ else { ++ printf("Usage: %s <-le|-be>\n", argv[0]); ++ return EXIT_FAILURE; ++ } ++ } ++ ++ for (image = (struct dl_image *)arrayptr, cnt=0; ++ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d); ++ image = (struct dl_image *)(arrayptr), cnt++) ++ { ++ unsigned char field[4]; ++ imgsiz = image->size + 3; ++ *(unsigned*)field = to_be32(image->id); ++ char filename[40], slnk[10]; ++ ++ sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A', ++ image->id); ++ sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A'); ++ printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x " ++ "Size: %5d to: '%s'\n", ++ names[field[0] >> 4], (field[0] & 0xf) + 'A', ++ field[1], field[2], field[3], imgsiz*4, filename); ++ fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644); ++ if (fd >= 0) { ++ for (i=0; i<imgsiz; i++) { ++ *(unsigned*)field = bigendian ? ++ to_be32(arrayptr[i]) : ++ to_le32(arrayptr[i]); ++ write(fd, field, sizeof(field)); ++ } ++ close(fd); ++ unlink(slnk); ++ symlink(filename, slnk); ++ } else { ++ perror(filename); ++ } ++ arrayptr += imgsiz; ++ } ++ close(fd); ++ return 0; ++} +Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,62 @@ ++Informations about the Networking Driver using the IXP4XX CPU internal NPEs ++and Queue manager. ++ ++If this driver is used, the IAL (Intel Access Library) must not be loaded. ++However, the IAL may be loaded, if this Modules are unloaded: ++ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko ++ ++This also means that HW crypto accelleration does NOT work when using this ++driver, unless I have finished my crypto driver for NPE-C ++ ++ ++Adoption to your custom board: ++------------------------------ ++use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template: ++ ++in "static struct mac_plat_info" adopt the entry "phy_id" to your needs ++(Ask your hardware designer about the PHY id) ++ ++The order of "&mac0" and "&mac1" in the "struct platform_device" ++determines which of them becomes eth0 and eth1 ++ ++ ++The Microcode: ++--------------- ++Solution 1) ++ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure ++ IXP4XX_NPE as module. ++ The default hotplug script will load the Firmware from ++ /usr/lib/hotplug/firmware/NPE-[ABC] ++ see Documentation/firmware_class/hotplug-script ++ ++ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware" ++ to avoid unnessecary calls: ++ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit ++ ++Solution 2) ++ create a char-dev: "mknod /dev/misc/npe c 10 184" ++ cat the Microcode into it: ++ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe ++ This also works if the driver is linked to the kernel ++ ++ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C) ++ is perfectly ok and works. ++ ++ The state of the NPEs can be seen and changed at: ++ /sys/bus/platform/devices/ixp4xx_npe.X/state ++ ++ ++Obtaining the Microcode: ++------------------------ ++1) IxNpeMicrocode.h in this directory: ++ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel ++ It unpacks the Microcode IxNpeMicrocode.c ++ Read the Licence ! ++ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host. ++ The resulting images can be moved to "/usr/lib/hotplug/firmware" ++ ++2) mc_grab.c in this directory: ++ Compile and execute it either on the host or on the target ++ to grab the microcode from a binary image like the RedBoot bootloader. ++ ++ +Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,97 @@ ++/* ++ * mc_grab.c - grabs IXP4XX microcode from a binary datastream ++ * e.g. The redboot bootloader.... ++ * ++ * usage: mc_grab 1010200 2010200 < /dev/mtd/0 > /dev/misc/npe ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++ ++#include <stdlib.h> ++#include <stdio.h> ++#include <unistd.h> ++#include <netinet/in.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <fcntl.h> ++#include <errno.h> ++#include <string.h> ++ ++#define MAX_IMG 6 ++ ++static void print_mc_info(unsigned id, int siz) ++{ ++ unsigned char buf[sizeof(unsigned)]; ++ *(unsigned*)buf = id; ++ unsigned idx; ++ const char *names[] = { "IXP425", "IXP465", "unknown" }; ++ ++ idx = (buf[0] >> 4) < 2 ? (buf[0] >> 4) : 2; ++ ++ fprintf(stderr, "Device: %s:NPE_%c Func: %2x Rev: %02x.%02x " ++ "Size: %5d bytes ID:%08x\n", names[idx], (buf[0] & 0xf)+'A', ++ buf[1], buf[2], buf[3], siz*4, ntohl(id)); ++} ++ ++int main(int argc, char *argv[]) ++{ ++ int i,j; ++ unsigned char buf[sizeof(unsigned)]; ++ unsigned magic = htonl(0xfeedf00d); ++ unsigned id, my_ids[MAX_IMG+1], siz, sizbe; ++ int ret=1, verbose=0; ++ ++ for (i=0, j=0; i<argc-1 && j<MAX_IMG; i++) { ++ if (!strcmp(argv[i+1], "-v")) ++ verbose = 1; ++ else ++ my_ids[j++] = htonl(strtoul(argv[i+1], NULL, 16)); ++ } ++ my_ids[j] = 0; ++ if (my_ids[0] == 0 && !verbose) { ++ fprintf(stderr, "Usage: %s <-v> [ID1] [ID2] [IDn]\n", argv[0]); ++ return 1; ++ } ++ ++ while ((ret=read(0, buf, sizeof(unsigned))) == sizeof(unsigned)) { ++ if (*(unsigned*)buf != magic) ++ continue; ++ if ((ret=read(0, buf, sizeof(unsigned))) != sizeof(unsigned) ) ++ break; ++ id = *(unsigned*)buf; ++ ++ if (read(0, buf, sizeof(siz)) != sizeof(siz) ) ++ break; ++ sizbe = *(unsigned*)buf; ++ siz = ntohl(sizbe); ++ ++ if (verbose) ++ print_mc_info(id, siz); ++ ++ for(i=0; my_ids[i]; i++) ++ if (id == my_ids[i]) ++ break; ++ if (!my_ids[i]) ++ continue; ++ ++ if (!verbose) ++ print_mc_info(id, siz); ++ ++ write(1, &magic, sizeof(magic)); ++ write(1, &id, sizeof(id)); ++ write(1, &sizbe, sizeof(sizbe)); ++ for (i=0; i<siz; i++) { ++ if (read(0, buf, sizeof(unsigned)) != sizeof(unsigned)) ++ break; ++ write(1, buf, sizeof(unsigned)); ++ } ++ if (i != siz) ++ break; ++ } ++ if (ret) ++ fprintf(stderr, "Error reading Microcode\n"); ++ return ret; ++} +Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c +=================================================================== +--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:35.000000000 -0800 +@@ -357,6 +357,90 @@ + &ixp46x_i2c_controller + }; + ++static struct npe_plat_data npea = { ++ .name = "NPE-A", ++ .data_size = 0x800, ++ .inst_size = 0x1000, ++ .id = 0, ++}; ++ ++static struct npe_plat_data npeb = { ++ .name = "NPE-B", ++ .data_size = 0x800, ++ .inst_size = 0x800, ++ .id = 1, ++}; ++ ++static struct npe_plat_data npec = { ++ .name = "NPE-C", ++ .data_size = 0x800, ++ .inst_size = 0x800, ++ .id = 2, ++}; ++ ++static struct resource res_npea = { ++ .start = IXP4XX_NPEA_BASE_PHYS, ++ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_npeb = { ++ .start = IXP4XX_NPEB_BASE_PHYS, ++ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_npec = { ++ .start = IXP4XX_NPEC_BASE_PHYS, ++ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device dev_npea = { ++ .name = "ixp4xx_npe", ++ .id = 0, ++ .dev.platform_data = &npea, ++ .num_resources = 1, ++ .resource = &res_npea, ++}; ++ ++static struct platform_device dev_npeb = { ++ .name = "ixp4xx_npe", ++ .id = 1, ++ .dev.platform_data = &npeb, ++ .num_resources = 1, ++ .resource = &res_npeb, ++}; ++ ++static struct platform_device dev_npec = { ++ .name = "ixp4xx_npe", ++ .id = 2, ++ .dev.platform_data = &npec, ++ .num_resources = 1, ++ .resource = &res_npec, ++}; ++ ++/* QMGR */ ++static struct resource res_qmgr[] = { ++{ ++ .start = IXP4XX_QMGR_BASE_PHYS, ++ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1, ++ .flags = IORESOURCE_MEM, ++}, { ++ .start = IRQ_IXP4XX_QM1, ++ .flags = IORESOURCE_IRQ, ++} }; ++ ++static struct platform_device qmgr = { ++ .name = "ixp4xx_qmgr", ++ .id = 0, ++ .dev = { ++ .coherent_dma_mask = DMA_32BIT_MASK, ++ }, ++ .num_resources = ARRAY_SIZE(res_qmgr), ++ .resource = res_qmgr, ++}; ++ + unsigned long ixp4xx_exp_bus_size; + EXPORT_SYMBOL(ixp4xx_exp_bus_size); + +@@ -378,8 +462,19 @@ + break; + } + } ++ npeb.inst_size = 0x1000; ++ npec.inst_size = 0x1000; + } + ++ platform_device_register(&qmgr); ++ ++ if (ix_fuse() & IX_FUSE_NPEA) ++ platform_device_register(&dev_npea); ++ if (ix_fuse() & IX_FUSE_NPEB) ++ platform_device_register(&dev_npeb); ++ if (ix_fuse() & IX_FUSE_NPEC) ++ platform_device_register(&dev_npec); ++ + printk("IXP4xx: Using %luMiB expansion bus window size\n", + ixp4xx_exp_bus_size >> 20); + } +Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c +=================================================================== +--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:35.000000000 -0800 +@@ -101,10 +101,59 @@ + .resource = ixdp425_uart_resources + }; + ++/* MACs */ ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 0, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 1, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *ixdp425_devices[] __initdata = { + &ixdp425_i2c_controller, + &ixdp425_flash, +- &ixdp425_uart ++ &ixdp425_uart, ++ &mac0, ++ &mac1, + }; + + static void __init ixdp425_init(void) +Index: linux-2.6.21-rc1-arm/drivers/net/Kconfig +=================================================================== +--- linux-2.6.21-rc1-arm.orig/drivers/net/Kconfig 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/drivers/net/Kconfig 2007-02-21 02:24:35.000000000 -0800 +@@ -201,6 +201,8 @@ + + source "drivers/net/arm/Kconfig" + ++source "drivers/net/ixp4xx/Kconfig" ++ + config MACE + tristate "MACE (Power Mac ethernet) support" + depends on NET_ETHERNET && PPC_PMAC && PPC32 +Index: linux-2.6.21-rc1-arm/drivers/net/Makefile +=================================================================== +--- linux-2.6.21-rc1-arm.orig/drivers/net/Makefile 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/drivers/net/Makefile 2007-02-21 02:24:35.000000000 -0800 +@@ -212,6 +212,7 @@ + obj-$(CONFIG_IRDA) += irda/ + obj-$(CONFIG_ETRAX_ETHERNET) += cris/ + obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ ++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/ + + obj-$(CONFIG_NETCONSOLE) += netconsole.o + +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,48 @@ ++config IXP4XX_QMGR ++ tristate "IXP4xx Queue Manager support" ++ depends on ARCH_IXP4XX ++ depends on NET_ETHERNET ++ help ++ The IXP4XX Queue manager is a configurable hardware ringbuffer. ++ It is used by the NPEs to exchange data from and to the CPU. ++ You can either use this OR the Intel Access Library (IAL) ++ ++config IXP4XX_NPE ++ tristate "IXP4xx NPE support" ++ depends on ARCH_IXP4XX ++ depends on NET_ETHERNET ++ help ++ The IXP4XX NPE driver supports the 3 CPU co-processors called ++ "Network Processing Engines" (NPE). It adds support fo downloading ++ the Microcode (firmware) via Hotplug or character-special-device. ++ More about this at: Documentation/networking/ixp4xx/README. ++ You can either use this OR the Intel Access Library (IAL) ++ ++config IXP4XX_FW_LOAD ++ bool "Use Firmware hotplug for Microcode download" ++ depends on IXP4XX_NPE ++ select HOTPLUG ++ select FW_LOADER ++ help ++ The default hotplug script will load the Firmware from ++ /usr/lib/hotplug/firmware/NPE-[ABC] ++ see Documentation/firmware_class/hotplug-script ++ ++config IXP4XX_MAC ++ tristate "IXP4xx MAC support" ++ depends on IXP4XX_NPE ++ depends on IXP4XX_QMGR ++ depends on NET_ETHERNET ++ select MII ++ help ++ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs. ++ There are 2 on ixp425 and up to 5 on ixdp465. ++ You can either use this OR the Intel Access Library (IAL) ++ ++config IXP4XX_CRYPTO ++ tristate "IXP4xx crypto support" ++ depends on IXP4XX_NPE ++ depends on IXP4XX_QMGR ++ help ++ This driver is a generic NPE-crypto access layer. ++ You need additional code in OCF for example. +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,7 @@ ++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o ++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o ++obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o ++obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o ++ ++ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o ++ixp4xx_mac-objs := mac_driver.o phy.o +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,851 @@ ++/* ++ * ixp4xx_crypto.c - interface to the HW crypto ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/ixp_qmgr.h> ++#include <linux/ixp_npe.h> ++#include <linux/dma-mapping.h> ++#include <linux/dmapool.h> ++#include <linux/device.h> ++#include <linux/delay.h> ++#include <linux/slab.h> ++#include <linux/kernel.h> ++#include <linux/ixp_crypto.h> ++ ++#define SEND_QID 29 ++#define RECV_QID 30 ++ ++#define NPE_ID 2 /* NPE C */ ++ ++#define QUEUE_SIZE 64 ++#define MY_VERSION "0.0.1" ++ ++/* local head for all sa_ctx */ ++static struct ix_sa_master sa_master; ++ ++static const struct ix_hash_algo _hash_algos[] = { ++{ ++ .name = "MD5", ++ .cfgword = 0xAA010004, ++ .digest_len = 16, ++ .icv = "\x01\x23\x45\x67\x89\xAB\xCD\xEF" ++ "\xFE\xDC\xBA\x98\x76\x54\x32\x10", ++ .type = HASH_TYPE_MD5, ++},{ ++ .name = "SHA1", ++ .cfgword = 0x00000005, ++ .digest_len = 20, ++ .icv = "\x67\x45\x23\x01\xEF\xCD\xAB\x89\x98\xBA" ++ "\xDC\xFE\x10\x32\x54\x76\xC3\xD2\xE1\xF0", ++ .type = HASH_TYPE_SHA1, ++#if 0 ++},{ ++ .name = "CBC MAC", ++ .digest_len = 64, ++ .aad_len = 48, ++ .type = HASH_TYPE_CBCMAC, ++#endif ++} }; ++ ++static const struct ix_cipher_algo _cipher_algos[] = { ++{ ++ .name = "DES ECB", ++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_ECB | KEYLEN_192, ++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_ECB | KEYLEN_192, ++ .block_len = 8, ++ .type = CIPHER_TYPE_DES, ++ .mode = CIPHER_MODE_ECB, ++},{ ++ .name = "DES CBC", ++ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_CBC_ENC | KEYLEN_192, ++ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_CBC_DEC | KEYLEN_192, ++ .iv_len = 8, ++ .block_len = 8, ++ .type = CIPHER_TYPE_DES, ++ .mode = CIPHER_MODE_CBC, ++},{ ++ .name = "3DES ECB", ++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_ECB | KEYLEN_192, ++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_ECB | KEYLEN_192, ++ .block_len = 8, ++ .type = CIPHER_TYPE_3DES, ++ .mode = CIPHER_MODE_ECB, ++},{ ++ .name = "3DES CBC", ++ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_CBC_ENC | KEYLEN_192, ++ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_CBC_DEC | KEYLEN_192, ++ .iv_len = 8, ++ .block_len = 8, ++ .type = CIPHER_TYPE_3DES, ++ .mode = CIPHER_MODE_CBC, ++},{ ++ .name = "AES ECB", ++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_ECB, ++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_ECB, ++ .block_len = 16, ++ .type = CIPHER_TYPE_AES, ++ .mode = CIPHER_MODE_ECB, ++},{ ++ .name = "AES CBC", ++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CBC_ENC, ++ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_CBC_DEC, ++ .block_len = 16, ++ .iv_len = 16, ++ .type = CIPHER_TYPE_AES, ++ .mode = CIPHER_MODE_CBC, ++},{ ++ .name = "AES CTR", ++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CTR, ++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CTR, ++ .block_len = 16, ++ .iv_len = 16, ++ .type = CIPHER_TYPE_AES, ++ .mode = CIPHER_MODE_CTR, ++#if 0 ++},{ ++ .name = "AES CCM", ++ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CCM_ENC, ++ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CCM_DEC, ++ .block_len = 16, ++ .iv_len = 16, ++ .type = CIPHER_TYPE_AES, ++ .mode = CIPHER_MODE_CCM, ++#endif ++} }; ++ ++const struct ix_hash_algo *ix_hash_by_id(int type) ++{ ++ int i; ++ ++ for(i=0; i<ARRAY_SIZE(_hash_algos); i++) { ++ if (_hash_algos[i].type == type) ++ return _hash_algos + i; ++ } ++ return NULL; ++} ++ ++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode) ++{ ++ int i; ++ ++ for(i=0; i<ARRAY_SIZE(_cipher_algos); i++) { ++ if (_cipher_algos[i].type==type && _cipher_algos[i].mode==mode) ++ return _cipher_algos + i; ++ } ++ return NULL; ++} ++ ++static void irqcb_recv(struct qm_queue *queue); ++ ++static int init_sa_master(struct ix_sa_master *master) ++{ ++ struct npe_info *npe; ++ int ret = -ENODEV; ++ ++ if (! (ix_fuse() & (IX_FUSE_HASH | IX_FUSE_AES | IX_FUSE_DES))) { ++ printk(KERN_ERR "ixp_crypto: No HW crypto available\n"); ++ return ret; ++ } ++ memset(master, 0, sizeof(struct ix_sa_master)); ++ master->npe_dev = get_npe_by_id(NPE_ID); ++ if (! master->npe_dev) ++ goto err; ++ ++ npe = dev_get_drvdata(master->npe_dev); ++ ++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { ++ switch (npe->img_info[1]) { ++ case 4: ++ printk(KERN_INFO "Crypto AES avaialable\n"); ++ break; ++ case 5: ++ printk(KERN_INFO "Crypto AES and CCM avaialable\n"); ++ break; ++ default: ++ printk(KERN_WARNING "Current microcode for %s has no" ++ " crypto capabilities\n", npe->plat->name); ++ break; ++ } ++ } ++ rwlock_init(&master->lock); ++ master->dmapool = dma_pool_create("ixp4xx_crypto", master->npe_dev, ++ sizeof(struct npe_crypt_cont), 32, 0); ++ if (!master->dmapool) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ master->sendq = request_queue(SEND_QID, QUEUE_SIZE); ++ if (IS_ERR(master->sendq)) { ++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n", ++ SEND_QID); ++ ret = PTR_ERR(master->sendq); ++ goto err; ++ } ++ master->recvq = request_queue(RECV_QID, QUEUE_SIZE); ++ if (IS_ERR(master->recvq)) { ++ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n", ++ RECV_QID); ++ ret = PTR_ERR(master->recvq); ++ release_queue(master->sendq); ++ goto err; ++ } ++ ++ master->recvq->irq_cb = irqcb_recv; ++ queue_set_watermarks(master->recvq, 0, 0); ++ queue_set_irq_src(master->recvq, Q_IRQ_ID_NOT_E); ++ queue_enable_irq(master->recvq); ++ printk(KERN_INFO "ixp4xx_crypto " MY_VERSION " registered successfully\n"); ++ ++ return 0; ++err: ++ if (master->dmapool) ++ dma_pool_destroy(master->dmapool); ++ if (! master->npe_dev) ++ put_device(master->npe_dev); ++ return ret; ++ ++} ++ ++static void release_sa_master(struct ix_sa_master *master) ++{ ++ struct npe_crypt_cont *cont; ++ unsigned long flags; ++ ++ write_lock_irqsave(&master->lock, flags); ++ while (master->pool) { ++ cont = master->pool; ++ master->pool = cont->next; ++ dma_pool_free(master->dmapool, cont, cont->phys); ++ master->pool_size--; ++ } ++ write_unlock_irqrestore(&master->lock, flags); ++ if (master->pool_size) { ++ printk(KERN_ERR "ixp4xx_crypto: %d items lost from DMA pool\n", ++ master->pool_size); ++ } ++ ++ dma_pool_destroy(master->dmapool); ++ release_queue(master->sendq); ++ release_queue(master->recvq); ++ return_npe_dev(master->npe_dev); ++} ++ ++static struct npe_crypt_cont *ix_sa_get_cont(struct ix_sa_master *master) ++{ ++ unsigned long flags; ++ struct npe_crypt_cont *cont; ++ dma_addr_t handle; ++ ++ write_lock_irqsave(&master->lock, flags); ++ if (!master->pool) { ++ cont = dma_pool_alloc(master->dmapool, GFP_ATOMIC, &handle); ++ if (cont) { ++ master->pool_size++; ++ cont->phys = handle; ++ cont->virt = cont; ++ } ++ } else { ++ cont = master->pool; ++ master->pool = cont->next; ++ } ++ write_unlock_irqrestore(&master->lock, flags); ++ return cont; ++} ++ ++static void ++ix_sa_return_cont(struct ix_sa_master *master,struct npe_crypt_cont *cont) ++{ ++ unsigned long flags; ++ ++ write_lock_irqsave(&master->lock, flags); ++ cont->next = master->pool; ++ master->pool = cont; ++ write_unlock_irqrestore(&master->lock, flags); ++} ++ ++static void free_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir) ++{ ++ memset(dir->npe_ctx, 0, NPE_CTX_LEN); ++ dma_pool_free(sa_ctx->master->dmapool, dir->npe_ctx, ++ dir->npe_ctx_phys); ++} ++ ++static void ix_sa_ctx_destroy(struct ix_sa_ctx *sa_ctx) ++{ ++ BUG_ON(sa_ctx->state != STATE_UNLOADING); ++ free_sa_dir(sa_ctx, &sa_ctx->encrypt); ++ free_sa_dir(sa_ctx, &sa_ctx->decrypt); ++ kfree(sa_ctx); ++ module_put(THIS_MODULE); ++} ++ ++static void recv_pack(struct qm_queue *queue, u32 phys) ++{ ++ struct ix_sa_ctx *sa_ctx; ++ struct npe_crypt_cont *cr_cont; ++ struct npe_cont *cont; ++ int failed; ++ ++ failed = phys & 0x1; ++ phys &= ~0x3; ++ ++ cr_cont = dma_to_virt(queue->dev, phys); ++ cr_cont = cr_cont->virt; ++ sa_ctx = cr_cont->ctl.crypt.sa_ctx; ++ ++ phys = npe_to_cpu32(cr_cont->ctl.crypt.src_buf); ++ if (phys) { ++ cont = dma_to_virt(queue->dev, phys); ++ cont = cont->virt; ++ } else { ++ cont = NULL; ++ } ++ if (cr_cont->ctl.crypt.oper_type == OP_PERFORM) { ++ dma_unmap_single(sa_ctx->master->npe_dev, ++ cont->eth.phys_addr, ++ cont->eth.buf_len, ++ DMA_BIDIRECTIONAL); ++ if (sa_ctx->perf_cb) ++ sa_ctx->perf_cb(sa_ctx, cont->data, failed); ++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont); ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ if (atomic_dec_and_test(&sa_ctx->use_cnt)) ++ ix_sa_ctx_destroy(sa_ctx); ++ return; ++ } ++ ++ /* We are registering */ ++ switch (cr_cont->ctl.crypt.mode) { ++ case NPE_OP_HASH_GEN_ICV: ++ /* 1 out of 2 HMAC preparation operations completed */ ++ dma_unmap_single(sa_ctx->master->npe_dev, ++ cont->eth.phys_addr, ++ cont->eth.buf_len, ++ DMA_TO_DEVICE); ++ kfree(cont->data); ++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont); ++ break; ++ case NPE_OP_ENC_GEN_KEY: ++ memcpy(sa_ctx->decrypt.npe_ctx + sizeof(u32), ++ sa_ctx->rev_aes->ctl.rev_aes_key + sizeof(u32), ++ sa_ctx->c_key.len); ++ /* REV AES data not needed anymore, free it */ ++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); ++ sa_ctx->rev_aes = NULL; ++ break; ++ default: ++ printk(KERN_ERR "Unknown crypt-register mode: %x\n", ++ cr_cont->ctl.crypt.mode); ++ ++ } ++ if (cr_cont->ctl.crypt.oper_type == OP_REG_DONE) { ++ if (sa_ctx->state == STATE_UNREGISTERED) ++ sa_ctx->state = STATE_REGISTERED; ++ if (sa_ctx->reg_cb) ++ sa_ctx->reg_cb(sa_ctx, failed); ++ } ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ if (atomic_dec_and_test(&sa_ctx->use_cnt)) ++ ix_sa_ctx_destroy(sa_ctx); ++} ++ ++static void irqcb_recv(struct qm_queue *queue) ++{ ++ u32 phys; ++ ++ queue_ack_irq(queue); ++ while ((phys = queue_get_entry(queue))) ++ recv_pack(queue, phys); ++} ++ ++static int init_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir) ++{ ++ dir->npe_ctx = dma_pool_alloc(sa_ctx->master->dmapool, ++ sa_ctx->gfp_flags, &dir->npe_ctx_phys); ++ if (!dir->npe_ctx) { ++ return 1; ++ } ++ memset(dir->npe_ctx, 0, NPE_CTX_LEN); ++ return 0; ++} ++ ++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags) ++{ ++ struct ix_sa_ctx *sa_ctx; ++ struct ix_sa_master *master = &sa_master; ++ struct npe_info *npe = dev_get_drvdata(master->npe_dev); ++ ++ /* first check if Microcode was downloaded into this NPE */ ++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) { ++ printk(KERN_ERR "%s not running\n", npe->plat->name); ++ return NULL; ++ } ++ switch (npe->img_info[1]) { ++ case 4: ++ case 5: ++ break; ++ default: ++ /* No crypto Microcode */ ++ return NULL; ++ } ++ if (!try_module_get(THIS_MODULE)) { ++ return NULL; ++ } ++ ++ sa_ctx = kzalloc(sizeof(struct ix_sa_ctx) + priv_len, flags); ++ if (!sa_ctx) { ++ goto err_put; ++ } ++ ++ sa_ctx->master = master; ++ sa_ctx->gfp_flags = flags; ++ ++ if (init_sa_dir(sa_ctx, &sa_ctx->encrypt)) ++ goto err_free; ++ if (init_sa_dir(sa_ctx, &sa_ctx->decrypt)) { ++ free_sa_dir(sa_ctx, &sa_ctx->encrypt); ++ goto err_free; ++ } ++ if (priv_len) ++ sa_ctx->priv = sa_ctx + 1; ++ ++ atomic_set(&sa_ctx->use_cnt, 1); ++ return sa_ctx; ++ ++err_free: ++ kfree(sa_ctx); ++err_put: ++ module_put(THIS_MODULE); ++ return NULL; ++} ++ ++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx) ++{ ++ sa_ctx->state = STATE_UNLOADING; ++ if (atomic_dec_and_test(&sa_ctx->use_cnt)) ++ ix_sa_ctx_destroy(sa_ctx); ++ else ++ printk("ix_sa_ctx_free -> delayed: %p %d\n", ++ sa_ctx, atomic_read(&sa_ctx->use_cnt)); ++} ++ ++/* http://www.ietf.org/rfc/rfc2104.txt */ ++#define HMAC_IPAD_VALUE 0x36 ++#define HMAC_OPAD_VALUE 0x5C ++#define PAD_BLOCKLEN 64 ++ ++static int register_chain_var(struct ix_sa_ctx *sa_ctx, ++ unsigned char *pad, u32 target, int init_len, u32 ctx_addr, int oper) ++{ ++ struct npe_crypt_cont *cr_cont; ++ struct npe_cont *cont; ++ ++ cr_cont = ix_sa_get_cont(sa_ctx->master); ++ if (!cr_cont) ++ return -ENOMEM; ++ ++ cr_cont->ctl.crypt.sa_ctx = sa_ctx; ++ cr_cont->ctl.crypt.auth_offs = 0; ++ cr_cont->ctl.crypt.auth_len =cpu_to_npe16(PAD_BLOCKLEN); ++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(ctx_addr); ++ ++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev)); ++ if (!cont) { ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ return -ENOMEM; ++ } ++ ++ cont->data = pad; ++ cont->eth.next = 0; ++ cont->eth.buf_len = cpu_to_npe16(PAD_BLOCKLEN); ++ cont->eth.pkt_len = 0; ++ ++ cont->eth.phys_addr = cpu_to_npe32(dma_map_single( ++ sa_ctx->master->npe_dev, pad, PAD_BLOCKLEN, DMA_TO_DEVICE)); ++ ++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys); ++ cr_cont->ctl.crypt.oper_type = oper; ++ ++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(target); ++ cr_cont->ctl.crypt.mode = NPE_OP_HASH_GEN_ICV; ++ cr_cont->ctl.crypt.init_len = init_len; ++ ++ atomic_inc(&sa_ctx->use_cnt); ++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); ++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */ ++ atomic_dec(&sa_ctx->use_cnt); ++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), ++ cont); ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ return -ENOMEM; ++ } ++ return 0; ++} ++ ++/* Return value ++ * 0 if nothing registered, ++ * 1 if something registered and ++ * < 0 on error ++ */ ++static int ix_sa_ctx_setup_auth(struct ix_sa_ctx *sa_ctx, ++ const struct ix_hash_algo *algo, int len, int oper, int encrypt) ++{ ++ unsigned char *ipad, *opad; ++ u32 itarget, otarget, ctx_addr; ++ unsigned char *cinfo; ++ int init_len, i, ret = 0; ++ struct qm_qmgr *qmgr; ++ struct ix_sa_dir *dir; ++ u32 cfgword; ++ ++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; ++ cinfo = dir->npe_ctx + dir->npe_ctx_idx; ++ ++ qmgr = dev_get_drvdata(sa_ctx->master->sendq->dev); ++ ++ cinfo = dir->npe_ctx + dir->npe_ctx_idx; ++ sa_ctx->h_algo = algo; ++ ++ if (!algo) { ++ dir->npe_mode |= NPE_OP_HMAC_DISABLE; ++ return 0; ++ } ++ if (algo->type == HASH_TYPE_CBCMAC) { ++ dir->npe_mode |= NPE_OP_CCM_ENABLE | NPE_OP_HMAC_DISABLE; ++ return 0; ++ } ++ if (sa_ctx->h_key.len > 64 || sa_ctx->h_key.len < algo->digest_len) ++ return -EINVAL; ++ if (len > algo->digest_len || (len % 4)) ++ return -EINVAL; ++ if (!len) ++ len = algo->digest_len; ++ ++ sa_ctx->digest_len = len; ++ ++ /* write cfg word to cryptinfo */ ++ cfgword = algo->cfgword | ((len/4) << 8); ++ *(u32*)cinfo = cpu_to_be32(cfgword); ++ cinfo += sizeof(cfgword); ++ ++ /* write ICV to cryptinfo */ ++ memcpy(cinfo, algo->icv, algo->digest_len); ++ cinfo += algo->digest_len; ++ ++ itarget = dir->npe_ctx_phys + dir->npe_ctx_idx ++ + sizeof(algo->cfgword); ++ otarget = itarget + algo->digest_len; ++ ++ opad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA); ++ if (!opad) { ++ return -ENOMEM; ++ } ++ ipad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA); ++ if (!ipad) { ++ kfree(opad); ++ return -ENOMEM; ++ } ++ memcpy(ipad, sa_ctx->h_key.key, sa_ctx->h_key.len); ++ memcpy(opad, sa_ctx->h_key.key, sa_ctx->h_key.len); ++ for (i = 0; i < PAD_BLOCKLEN; i++) { ++ ipad[i] ^= HMAC_IPAD_VALUE; ++ opad[i] ^= HMAC_OPAD_VALUE; ++ } ++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx); ++ ctx_addr = dir->npe_ctx_phys + dir->npe_ctx_idx; ++ ++ dir->npe_ctx_idx += init_len; ++ dir->npe_mode |= NPE_OP_HASH_ENABLE; ++ ++ if (!encrypt) ++ dir->npe_mode |= NPE_OP_HASH_VERIFY; ++ ++ /* register first chainvar */ ++ ret = register_chain_var(sa_ctx, opad, otarget, ++ init_len, ctx_addr, OP_REGISTER); ++ if (ret) { ++ kfree(ipad); ++ kfree(opad); ++ return ret; ++ } ++ ++ /* register second chainvar */ ++ ret = register_chain_var(sa_ctx, ipad, itarget, ++ init_len, ctx_addr, oper); ++ if (ret) { ++ kfree(ipad); ++ return ret; ++ } ++ ++ return 1; ++} ++ ++static int gen_rev_aes_key(struct ix_sa_ctx *sa_ctx, ++ u32 keylen_cfg, int cipher_op) ++{ ++ unsigned char *cinfo; ++ struct npe_crypt_cont *cr_cont; ++ ++ keylen_cfg |= CIPH_ENCR | ALGO_AES | MOD_ECB; ++ sa_ctx->rev_aes = ix_sa_get_cont(sa_ctx->master); ++ if (!sa_ctx->rev_aes) ++ return -ENOMEM; ++ ++ cinfo = sa_ctx->rev_aes->ctl.rev_aes_key; ++ *(u32*)cinfo = cpu_to_be32(keylen_cfg); ++ cinfo += sizeof(keylen_cfg); ++ ++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len); ++ ++ cr_cont = ix_sa_get_cont(sa_ctx->master); ++ if (!cr_cont) { ++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); ++ sa_ctx->rev_aes = NULL; ++ return -ENOMEM; ++ } ++ cr_cont->ctl.crypt.sa_ctx = sa_ctx; ++ cr_cont->ctl.crypt.oper_type = cipher_op; ++ ++ cr_cont->ctl.crypt.crypt_offs = 0; ++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(AES_BLOCK128); ++ cr_cont->ctl.crypt.addr.rev_aes = cpu_to_npe32( ++ sa_ctx->rev_aes->phys + sizeof(keylen_cfg)); ++ ++ cr_cont->ctl.crypt.src_buf = 0; ++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(sa_ctx->rev_aes->phys); ++ cr_cont->ctl.crypt.mode = NPE_OP_ENC_GEN_KEY; ++ cr_cont->ctl.crypt.init_len = sa_ctx->decrypt.npe_ctx_idx; ++ ++ atomic_inc(&sa_ctx->use_cnt); ++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); ++ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */ ++ atomic_dec(&sa_ctx->use_cnt); ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); ++ sa_ctx->rev_aes = NULL; ++ return -ENOMEM; ++ } ++ ++ return 1; ++} ++ ++/* Return value ++ * 0 if nothing registered, ++ * 1 if something registered and ++ * < 0 on error ++ */ ++static int ix_sa_ctx_setup_cipher(struct ix_sa_ctx *sa_ctx, ++ const struct ix_cipher_algo *algo, int cipher_op, int encrypt) ++{ ++ unsigned char *cinfo; ++ int keylen, init_len; ++ u32 cipher_cfg; ++ u32 keylen_cfg = 0; ++ struct ix_sa_dir *dir; ++ ++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; ++ cinfo = dir->npe_ctx + dir->npe_ctx_idx; ++ ++ sa_ctx->c_algo = algo; ++ ++ if (!algo) ++ return 0; ++ ++ if (algo->type == CIPHER_TYPE_DES && sa_ctx->c_key.len != 8) ++ return -EINVAL; ++ ++ if (algo->type == CIPHER_TYPE_3DES && sa_ctx->c_key.len != 24) ++ return -EINVAL; ++ ++ keylen = 24; ++ ++ if (encrypt) { ++ cipher_cfg = algo->cfgword_enc; ++ dir->npe_mode |= NPE_OP_CRYPT_ENCRYPT; ++ } else { ++ cipher_cfg = algo->cfgword_dec; ++ } ++ if (algo->type == CIPHER_TYPE_AES) { ++ switch (sa_ctx->c_key.len) { ++ case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break; ++ case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break; ++ case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break; ++ default: return -EINVAL; ++ } ++ keylen = sa_ctx->c_key.len; ++ cipher_cfg |= keylen_cfg; ++ } ++ ++ /* write cfg word to cryptinfo */ ++ *(u32*)cinfo = cpu_to_be32(cipher_cfg); ++ cinfo += sizeof(cipher_cfg); ++ ++ /* write cipher key to cryptinfo */ ++ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len); ++ cinfo += keylen; ++ ++ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx); ++ dir->npe_ctx_idx += init_len; ++ ++ dir->npe_mode |= NPE_OP_CRYPT_ENABLE; ++ ++ if (algo->type == CIPHER_TYPE_AES && !encrypt) { ++ return gen_rev_aes_key(sa_ctx, keylen_cfg, cipher_op); ++ } ++ ++ return 0; ++} ++ ++/* returns 0 on OK, <0 on error and 1 on overflow */ ++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr, ++ int datalen, int c_offs, int c_len, int a_offs, int a_len, ++ int hmac, char *iv, int encrypt) ++{ ++ struct npe_crypt_cont *cr_cont; ++ struct npe_cont *cont; ++ u32 data_phys; ++ int ret = -ENOMEM; ++ struct ix_sa_dir *dir; ++ ++ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; ++ ++ if (sa_ctx->state != STATE_REGISTERED) ++ return -ENOENT; ++ ++ cr_cont = ix_sa_get_cont(sa_ctx->master); ++ if (!cr_cont) ++ return ret; ++ ++ cr_cont->ctl.crypt.sa_ctx = sa_ctx; ++ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(dir->npe_ctx_phys); ++ cr_cont->ctl.crypt.oper_type = OP_PERFORM; ++ cr_cont->ctl.crypt.mode = dir->npe_mode; ++ cr_cont->ctl.crypt.init_len = dir->npe_ctx_idx; ++ ++ if (sa_ctx->c_algo) { ++ cr_cont->ctl.crypt.crypt_offs = cpu_to_npe16(c_offs); ++ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(c_len); ++ if (sa_ctx->c_algo->iv_len) { ++ if (!iv) { ++ ret = -EINVAL; ++ goto err_cr; ++ } ++ memcpy(cr_cont->ctl.crypt.iv, iv, ++ sa_ctx->c_algo->iv_len); ++ } ++ } ++ ++ if (sa_ctx->h_algo) { ++ /* prepare hashing */ ++ cr_cont->ctl.crypt.auth_offs = cpu_to_npe16(a_offs); ++ cr_cont->ctl.crypt.auth_len = cpu_to_npe16(a_len); ++ } ++ ++ data_phys = dma_map_single(sa_ctx->master->npe_dev, ++ data, datalen, DMA_BIDIRECTIONAL); ++ if (hmac) ++ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(data_phys + hmac); ++ ++ /* Prepare the data ptr */ ++ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev)); ++ if (!cont) { ++ goto err_unmap; ++ } ++ ++ cont->data = ptr; ++ cont->eth.next = 0; ++ cont->eth.buf_len = cpu_to_npe16(datalen); ++ cont->eth.pkt_len = 0; ++ ++ cont->eth.phys_addr = cpu_to_npe32(data_phys); ++ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys); ++ ++ atomic_inc(&sa_ctx->use_cnt); ++ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); ++ if (queue_stat(sa_ctx->master->sendq) != 2) { ++ return 0; ++ } ++ ++ /* overflow */ ++ printk("%s: Overflow\n", __FUNCTION__); ++ ret = -EAGAIN; ++ atomic_dec(&sa_ctx->use_cnt); ++ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), cont); ++ ++err_unmap: ++ dma_unmap_single(sa_ctx->master->npe_dev, data_phys, datalen, ++ DMA_BIDIRECTIONAL); ++err_cr: ++ ix_sa_return_cont(sa_ctx->master, cr_cont); ++ ++ return ret; ++} ++ ++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx, ++ const struct ix_cipher_algo *cipher, ++ const struct ix_hash_algo *auth, int len) ++{ ++ int ret = 0, sum = 0; ++ int cipher_op; ++ ++ if (sa_ctx->state != STATE_UNREGISTERED) ++ return -ENOENT; ++ ++ atomic_inc(&sa_ctx->use_cnt); ++ ++ cipher_op = auth ? OP_REGISTER : OP_REG_DONE; ++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, OP_REGISTER, 1)) < 0) ++ goto out; ++ sum += ret; ++ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, cipher_op, 0)) < 0) ++ goto out; ++ sum += ret; ++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REGISTER, 1)) < 0) ++ goto out; ++ sum += ret; ++ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REG_DONE, 0)) < 0) ++ goto out; ++ sum += ret; ++ ++ /* Nothing registered ? ++ * Ok, then we are done and call the callback here. ++ */ ++ if (!sum) { ++ if (sa_ctx->state == STATE_UNREGISTERED) ++ sa_ctx->state = STATE_REGISTERED; ++ if (sa_ctx->reg_cb) ++ sa_ctx->reg_cb(sa_ctx, 0); ++ } ++out: ++ atomic_dec(&sa_ctx->use_cnt); ++ return ret; ++} ++ ++static int __init init_crypto(void) ++{ ++ return init_sa_master(&sa_master); ++} ++ ++static void __exit finish_crypto(void) ++{ ++ release_sa_master(&sa_master); ++} ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); ++ ++EXPORT_SYMBOL(ix_hash_by_id); ++EXPORT_SYMBOL(ix_cipher_by_id); ++ ++EXPORT_SYMBOL(ix_sa_ctx_new); ++EXPORT_SYMBOL(ix_sa_ctx_free); ++EXPORT_SYMBOL(ix_sa_ctx_setup_cipher_auth); ++EXPORT_SYMBOL(ix_sa_crypto_perform); ++ ++module_init(init_crypto); ++module_exit(finish_crypto); ++ +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,474 @@ ++/* ++ * qmgr.c - reimplementation of the queue configuration interface. ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/fs.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/dmapool.h> ++#include <linux/interrupt.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <asm/uaccess.h> ++#include <asm/io.h> ++ ++#include <linux/ixp_qmgr.h> ++#include <linux/ixp_npe.h> ++ ++#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.1" ++ ++static struct device *qmgr_dev = NULL; ++ ++static int poll_freq = 4000; ++static int poll_enable = 0; ++static u32 timer_countup_ticks; ++ ++module_param(poll_freq, int, 0644); ++module_param(poll_enable, int, 0644); ++ ++int queue_len(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ int diff, offs; ++ u32 val; ++ ++ offs = queue->id/8 + QUE_LOW_STAT0; ++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); ++ ++ diff = (val - (val >> 7)) & 0x7f; ++ if (!diff) { ++ /* diff == 0 means either empty or full, must look at STAT0 */ ++ if ((*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x04) ++ diff = queue->len; ++ } ++ return diff; ++} ++ ++static int request_pool(struct device *dev, int count) ++{ ++ int i; ++ struct npe_cont *cont; ++ struct qm_qmgr *qmgr = dev_get_drvdata(dev); ++ dma_addr_t handle; ++ ++ for (i=0; i<count; i++) { ++ cont = dma_pool_alloc(qmgr->dmapool, GFP_KERNEL, &handle); ++ if (!cont) { ++ return -ENOMEM; ++ } ++ cont->phys = handle; ++ cont->virt = cont; ++ write_lock(&qmgr->lock); ++ cont->next = qmgr->pool; ++ qmgr->pool = cont; ++ write_unlock(&qmgr->lock); ++ } ++ return 0; ++} ++ ++static int free_pool(struct device *dev, int count) ++{ ++ int i; ++ struct npe_cont *cont; ++ struct qm_qmgr *qmgr = dev_get_drvdata(dev); ++ ++ for (i=0; i<count; i++) { ++ write_lock(&qmgr->lock); ++ cont = qmgr->pool; ++ if (!cont) { ++ write_unlock(&qmgr->lock); ++ return -1; ++ } ++ qmgr->pool = cont->next; ++ write_unlock(&qmgr->lock); ++ dma_pool_free(qmgr->dmapool, cont, cont->phys); ++ } ++ return 0; ++} ++ ++static int get_free_qspace(struct qm_qmgr *qmgr, int len) ++{ ++ int words = (qmgr->res->end - qmgr->res->start + 1) / 4 - ++ IX_QMGR_SRAM_SPACE; ++ int i,q; ++ ++ for (i=0; i<words; i+=len) { ++ for (q=0; q<MAX_QUEUES; q++) { ++ struct qm_queue *qu = qmgr->queues[q]; ++ if (!qu) ++ continue; ++ if ((qu->addr + qu->len > i) && (qu->addr < i + len)) ++ break; ++ } ++ if (q == MAX_QUEUES) { ++ /* we have a free address */ ++ return i; ++ } ++ } ++ return -1; ++} ++ ++static inline int _log2(int x) ++{ ++ int r=0; ++ while(x>>=1) ++ r++; ++ return r; ++} ++ ++/* ++ * 32bit Config registers at IX_QMGR_QUECONFIG_BASE_OFFSET[Qid] ++ * 0 - 6 WRPTR Word offset to baseaddr (index 0 .. BSIZE-1) ++ * 7 -13 RDPTR '' ++ * 14 -21 BADDR baseaddr = (offset to IX_QMGR_QUEBUFFER_SPACE_OFFSET) >> 6 ++ * 22 -23 ESIZE entrySizeInWords (always 00 because entrySizeInWords==1) ++ * 24 -25 BSIZE qSizeInWords 00=16,01=32,10=64,11=128 ++ * 26 -28 NE nearly empty ++ * 29 -31 NF nearly full ++ */ ++static int conf_q_regs(struct qm_queue *queue) ++{ ++ int bsize = _log2(queue->len/16); ++ int baddr = queue->addr + IX_QMGR_QCFG_SIZE; ++ ++ /* +2, because baddr is in words and not in bytes */ ++ queue_write_cfg_reg(queue, (bsize << 24) | (baddr<<(14-6+2)) ); ++ ++ return 0; ++} ++ ++static void pmu_timer_restart(void) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ __asm__(" mcr p14,0,%0,c1,c1,0\n" /* write current counter */ ++ : : "r" (timer_countup_ticks)); ++ ++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */ ++ " orr r1,r1,#1; " ++ " mcr p14,0,r1,c5,c1,0; " /* clear overflow */ ++ " mcr p14,0,r1,c4,c1,0\n" /* enable interrupts */ ++ : : : "r1"); ++ ++ local_irq_restore(flags); ++} ++ ++static void pmu_timer_init(void) ++{ ++ u32 controlRegisterMask = ++ BIT(0) | /* enable counters */ ++ BIT(2); /* reset clock counter; */ ++ ++ /* ++ * Compute the number of xscale cycles needed between each ++ * PMU IRQ. This is done from the result of an OS calibration loop. ++ * ++ * For 533MHz CPU, 533000000 tick/s / 4000 times/sec = 138250 ++ * 4000 times/sec = 37 mbufs/interrupt at line rate ++ * The pmu timer is reset to -138250 = 0xfffde3f6, to trigger an IRQ ++ * when this up counter overflows. ++ * ++ * The multiplication gives a number of instructions per second. ++ * which is close to the processor frequency, and then close to the ++ * PMU clock rate. ++ * ++ * 2 is the number of instructions per loop ++ * ++ */ ++ ++ timer_countup_ticks = - ((loops_per_jiffy * HZ * 2) / poll_freq); ++ ++ /* enable the CCNT (clock count) timer from the PMU */ ++ __asm__(" mcr p14,0,%0,c0,c1,0\n" ++ : : "r" (controlRegisterMask)); ++} ++ ++static void pmu_timer_disable(void) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */ ++ " and r1,r1,#0x1e; " ++ " mcr p14,0,r1,c4,c1,0\n" /* disable interrupts */ ++ : : : "r1"); ++ local_irq_restore(flags); ++} ++ ++void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf) ++{ ++ u32 val; ++ /* calculate the register values ++ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/ ++ ne = _log2(ne<<1) & 0x7; ++ nf = _log2(nf<<1) & 0x7; ++ ++ /* Mask out old watermarks */ ++ val = queue_read_cfg_reg(queue) & ~0xfc000000; ++ queue_write_cfg_reg(queue, val | (ne << 26) | (nf << 29)); ++} ++ ++int queue_set_irq_src(struct qm_queue *queue, int flag) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ u32 reg; ++ int offs, bitoffs; ++ ++ /* Q 0-7 are in REG0, 8-15 are in REG1, etc. They occupy 4 bits/Q */ ++ offs = queue->id/8 + INT0_SRC_SELREG0; ++ bitoffs = (queue->id % 8)*4; ++ ++ reg = *(qmgr->addr + offs) & ~(0xf << bitoffs); ++ *(qmgr->addr + offs) = reg | (flag << bitoffs); ++ ++ return 0; ++} ++ ++static irqreturn_t irq_qm1(int irq, void *dev_id) ++{ ++ struct qm_qmgr *qmgr = dev_id; ++ int offs, reg; ++ struct qm_queue *queue; ++ ++ if (poll_enable) ++ pmu_timer_restart(); ++ ++ reg = *(qmgr->addr + QUE_INT_REG0); ++ while(reg) { ++ /* ++ * count leading zeros. "offs" gets ++ * the amount of leading 0 in "reg" ++ */ ++ asm ("clz %0, %1;" : "=r"(offs) : "r"(reg)); ++ offs = 31 - offs; ++ reg &= ~(1 << offs); ++ queue = qmgr->queues[offs]; ++ if (likely(queue)) { ++ if (likely(queue->irq_cb)) { ++ queue->irq_cb(queue); ++ } else { ++ printk(KERN_ERR "Missing callback for Q %d\n", ++ offs); ++ } ++ } else { ++ printk(KERN_ERR "IRQ for unregistered Q %d\n", offs); ++ } ++ } ++ return IRQ_HANDLED; ++} ++ ++struct qm_queue *request_queue(int qid, int len) ++{ ++ int ram; ++ struct qm_qmgr *qmgr; ++ struct qm_queue *queue; ++ ++ if (!qmgr_dev) ++ return ERR_PTR(-ENODEV); ++ ++ if ((qid < 0) || (qid > MAX_QUEUES)) ++ return ERR_PTR(-ERANGE); ++ ++ switch (len) { ++ case 16: ++ case 32: ++ case 64: ++ case 128: break; ++ default : return ERR_PTR(-EINVAL); ++ } ++ ++ qmgr = dev_get_drvdata(qmgr_dev); ++ ++ if (qmgr->queues[qid]) { ++ /* not an error, just in use already */ ++ return NULL; ++ } ++ if ((ram = get_free_qspace(qmgr, len)) < 0) { ++ printk(KERN_ERR "No free SRAM space for this queue\n"); ++ return ERR_PTR(-ENOMEM); ++ } ++ if (!(queue = kzalloc(sizeof(struct qm_queue), GFP_KERNEL))) ++ return ERR_PTR(-ENOMEM); ++ ++ if (!try_module_get(THIS_MODULE)) { ++ kfree(queue); ++ return ERR_PTR(-ENODEV); ++ } ++ ++ queue->addr = ram; ++ queue->len = len; ++ queue->id = qid; ++ queue->dev = get_device(qmgr_dev); ++ queue->acc_reg = qmgr->addr + (4 * qid); ++ qmgr->queues[qid] = queue; ++ if (request_pool(qmgr_dev, len)) { ++ printk(KERN_ERR "Failed to request DMA pool of Q %d\n", qid); ++ } ++ ++ conf_q_regs(queue); ++ return queue; ++} ++ ++void release_queue(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ ++ BUG_ON(qmgr->queues[queue->id] != queue); ++ qmgr->queues[queue->id] = NULL; ++ ++ if (free_pool(queue->dev, queue->len)) { ++ printk(KERN_ERR "Failed to release DMA pool of Q %d\n", ++ queue->id); ++ } ++ queue_disable_irq(queue); ++ queue_write_cfg_reg(queue, 0); ++ ++ module_put(THIS_MODULE); ++ put_device(queue->dev); ++ kfree(queue); ++} ++ ++ ++ ++ ++static int qmgr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct qm_qmgr *qmgr; ++ int size, ret=0, i; ++ ++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) ++ return -EIO; ++ ++ if ((i = platform_get_irq(pdev, 0)) < 0) ++ return -EIO; ++ ++ if (!(qmgr = kzalloc(sizeof(struct qm_qmgr), GFP_KERNEL))) ++ return -ENOMEM; ++ ++ qmgr->irq = i; ++ size = res->end - res->start +1; ++ qmgr->res = request_mem_region(res->start, size, "ixp_qmgr"); ++ if (!qmgr->res) { ++ ret = -EBUSY; ++ goto out_free; ++ } ++ ++ qmgr->addr = ioremap(res->start, size); ++ if (!qmgr->addr) { ++ ret = -ENOMEM; ++ goto out_rel; ++ } ++ ++ /* Reset Q registers */ ++ for (i=0; i<4; i++) ++ *(qmgr->addr + QUE_LOW_STAT0 +i) = 0x33333333; ++ for (i=0; i<10; i++) ++ *(qmgr->addr + QUE_UO_STAT0 +i) = 0x0; ++ for (i=0; i<4; i++) ++ *(qmgr->addr + INT0_SRC_SELREG0 +i) = 0x0; ++ for (i=0; i<2; i++) { ++ *(qmgr->addr + QUE_IE_REG0 +i) = 0x00; ++ *(qmgr->addr + QUE_INT_REG0 +i) = 0xffffffff; ++ } ++ for (i=0; i<64; i++) { ++ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0; ++ } ++ ++ if (poll_enable) { ++ pmu_timer_init(); ++ qmgr->irq = IRQ_IXP4XX_XSCALE_PMU; ++ } ++ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT, ++ "qmgr", qmgr); ++ if (ret) { ++ printk(KERN_ERR "Failed to request IRQ(%d)\n", qmgr->irq); ++ ret = -EIO; ++ goto out_rel; ++ } ++ if (poll_enable) ++ pmu_timer_restart(); ++ ++ rwlock_init(&qmgr->lock); ++ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev, ++ sizeof(struct npe_cont), 32, 0); ++ platform_set_drvdata(pdev, qmgr); ++ ++ qmgr_dev = &pdev->dev; ++ ++ printk(KERN_INFO IXQMGR_VERSION " initialized.\n"); ++ ++ return 0; ++ ++out_rel: ++ release_resource(qmgr->res); ++out_free: ++ kfree(qmgr); ++ return ret; ++} ++ ++static int qmgr_remove(struct platform_device *pdev) ++{ ++ struct qm_qmgr *qmgr = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i=0; i<MAX_QUEUES; i++) { ++ if (qmgr->queues[i]) { ++ printk(KERN_ERR "WARNING Unreleased Q: %d\n", i); ++ release_queue(qmgr->queues[i]); ++ } ++ } ++ ++ if (poll_enable) ++ pmu_timer_disable(); ++ ++ synchronize_irq (qmgr->irq); ++ free_irq(qmgr->irq, qmgr); ++ ++ dma_pool_destroy(qmgr->dmapool); ++ iounmap(qmgr->addr); ++ release_resource(qmgr->res); ++ platform_set_drvdata(pdev, NULL); ++ qmgr_dev = NULL; ++ kfree(qmgr); ++ return 0; ++} ++ ++static struct platform_driver ixp4xx_qmgr = { ++ .driver.name = "ixp4xx_qmgr", ++ .probe = qmgr_probe, ++ .remove = qmgr_remove, ++}; ++ ++ ++static int __init init_qmgr(void) ++{ ++ return platform_driver_register(&ixp4xx_qmgr); ++} ++ ++static void __exit finish_qmgr(void) ++{ ++ platform_driver_unregister(&ixp4xx_qmgr); ++} ++ ++module_init(init_qmgr); ++module_exit(finish_qmgr); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); ++ ++EXPORT_SYMBOL(request_queue); ++EXPORT_SYMBOL(release_queue); ++EXPORT_SYMBOL(queue_set_irq_src); ++EXPORT_SYMBOL(queue_set_watermarks); ++EXPORT_SYMBOL(queue_len); +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,275 @@ ++/* ++ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/resource.h> ++#include <linux/netdevice.h> ++#include <linux/io.h> ++#include <linux/mii.h> ++#include <linux/workqueue.h> ++#include <asm/hardware.h> ++#include <linux/ixp_qmgr.h> ++ ++/* 32 bit offsets to be added to u32 *pointers */ ++#define MAC_TX_CNTRL1 0x00 // 0x000 ++#define MAC_TX_CNTRL2 0x01 // 0x004 ++#define MAC_RX_CNTRL1 0x04 // 0x010 ++#define MAC_RX_CNTRL2 0x05 // 0x014 ++#define MAC_RANDOM_SEED 0x08 // 0x020 ++#define MAC_THRESH_P_EMPTY 0x0c // 0x030 ++#define MAC_THRESH_P_FULL 0x0e // 0x038 ++#define MAC_BUF_SIZE_TX 0x10 // 0x040 ++#define MAC_TX_DEFER 0x14 // 0x050 ++#define MAC_RX_DEFER 0x15 // 0x054 ++#define MAC_TX_TWO_DEFER_1 0x18 // 0x060 ++#define MAC_TX_TWO_DEFER_2 0x19 // 0x064 ++#define MAC_SLOT_TIME 0x1c // 0x070 ++#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23 ++#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27 ++#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d ++#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35 ++#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register ++#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41 ++#define MAC_CORE_CNTRL 0x7f // 0x1fC ++ ++/* TX Control Register 1*/ ++ ++#define TX_CNTRL1_TX_EN BIT(0) ++#define TX_CNTRL1_DUPLEX BIT(1) ++#define TX_CNTRL1_RETRY BIT(2) ++#define TX_CNTRL1_PAD_EN BIT(3) ++#define TX_CNTRL1_FCS_EN BIT(4) ++#define TX_CNTRL1_2DEFER BIT(5) ++#define TX_CNTRL1_RMII BIT(6) ++ ++/* TX Control Register 2 */ ++#define TX_CNTRL2_RETRIES_MASK 0xf ++ ++/* RX Control Register 1 */ ++#define RX_CNTRL1_RX_EN BIT(0) ++#define RX_CNTRL1_PADSTRIP_EN BIT(1) ++#define RX_CNTRL1_CRC_EN BIT(2) ++#define RX_CNTRL1_PAUSE_EN BIT(3) ++#define RX_CNTRL1_LOOP_EN BIT(4) ++#define RX_CNTRL1_ADDR_FLTR_EN BIT(5) ++#define RX_CNTRL1_RX_RUNT_EN BIT(6) ++#define RX_CNTRL1_BCAST_DIS BIT(7) ++ ++/* RX Control Register 2 */ ++#define RX_CNTRL2_DEFER_EN BIT(0) ++ ++/* Core Control Register */ ++#define CORE_RESET BIT(0) ++#define CORE_RX_FIFO_FLUSH BIT(1) ++#define CORE_TX_FIFO_FLUSH BIT(2) ++#define CORE_SEND_JAM BIT(3) ++#define CORE_MDC_EN BIT(4) ++ ++/* Definitions for MII access routines*/ ++ ++#define MII_REG_SHL 16 ++#define MII_ADDR_SHL 21 ++ ++#define MII_GO BIT(31) ++#define MII_WRITE BIT(26) ++#define MII_READ_FAIL BIT(31) ++ ++#define MII_TIMEOUT_10TH_SECS 5 ++#define MII_10TH_SEC_IN_MILLIS 100 ++ ++/* ++ * ++ * Default values ++ * ++ */ ++ ++#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) ++ ++#define MAC_TX_CNTRL1_DEFAULT (\ ++ TX_CNTRL1_TX_EN | \ ++ TX_CNTRL1_RETRY | \ ++ TX_CNTRL1_FCS_EN | \ ++ TX_CNTRL1_2DEFER | \ ++ TX_CNTRL1_PAD_EN ) ++ ++#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f ++ ++#define MAC_RX_CNTRL1_DEFAULT ( \ ++ RX_CNTRL1_PADSTRIP_EN | \ ++ RX_CNTRL1_CRC_EN | \ ++ RX_CNTRL1_RX_EN ) ++ ++#define MAC_RX_CNTRL2_DEFAULT 0x0 ++#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK ++ ++/* Thresholds determined by NPE firmware FS */ ++#define MAC_THRESH_P_EMPTY_DEFAULT 0x12 ++#define MAC_THRESH_P_FULL_DEFAULT 0x30 ++ ++/* Number of bytes that must be in the tx fifo before ++ * transmission commences */ ++#define MAC_BUF_SIZE_TX_DEFAULT 0x8 ++ ++/* One-part deferral values */ ++#define MAC_TX_DEFER_DEFAULT 0x15 ++#define MAC_RX_DEFER_DEFAULT 0x16 ++ ++/* Two-part deferral values... */ ++#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08 ++#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07 ++ ++/* This value applies to MII */ ++#define MAC_SLOT_TIME_DEFAULT 0x80 ++ ++/* This value applies to RMII */ ++#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF ++ ++#define MAC_ADDR_MASK_DEFAULT 0xFF ++ ++#define MAC_INT_CLK_THRESH_DEFAULT 0x1 ++/* The following is a value chosen at random */ ++#define MAC_RANDOM_SEED_DEFAULT 0x8 ++ ++/* By default we must configure the MAC to generate the MDC clock*/ ++#define CORE_DEFAULT (CORE_MDC_EN) ++ ++/* End of Intel provided register information */ ++ ++extern int ++mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg); ++extern void ++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val); ++extern void init_mdio(struct net_device *dev, int phy_id); ++ ++struct mac_info { ++ u32 __iomem *addr; ++ struct resource *res; ++ struct device *npe_dev; ++ struct net_device *netdev; ++ struct qm_qmgr *qmgr; ++ struct qm_queue *rxq; ++ struct qm_queue *txq; ++ struct qm_queue *rxdoneq; ++ u32 irqflags; ++ struct net_device_stats stat; ++ struct mii_if_info mii; ++ struct delayed_work mdio_thread; ++ int rxq_pkt; ++ int txq_pkt; ++ int unloading; ++ struct mac_plat_info *plat; ++ int npe_stat_num; ++ spinlock_t rx_lock; ++ u32 msg_enable; ++}; ++ ++static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val) ++{ ++ *(mac->addr + offset) = val; ++} ++static inline u32 mac_read_reg(struct mac_info *mac, int offset) ++{ ++ return *(mac->addr + offset); ++} ++static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit) ++{ ++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit); ++} ++static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit) ++{ ++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit); ++} ++ ++static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd) ++{ ++ int i; ++ for(i=0; i<4; i++) { ++ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff); ++ cmd >>=8; ++ } ++} ++ ++#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD) ++#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS) ++static inline u32 mac_mdio_read(struct mac_info *mac, int offset) ++{ ++ int i; ++ u32 data = 0; ++ for(i=0; i<4; i++) { ++ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8); ++ } ++ return data; ++} ++ ++static inline u32 mdio_cmd(int phy_addr, int phy_reg) ++{ ++ return phy_addr << MII_ADDR_SHL | ++ phy_reg << MII_REG_SHL | ++ MII_GO; ++} ++ ++#define MAC_REG_LIST { \ ++ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \ ++ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \ ++ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \ ++ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \ ++ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \ ++ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \ ++ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \ ++ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \ ++ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \ ++ MAC_INT_CLK_THRESH, \ ++ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \ ++ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \ ++ MAC_CORE_CNTRL \ ++} ++ ++#define NPE_STAT_NUM 34 ++#define NPE_STAT_NUM_BASE 22 ++#define NPE_Q_STAT_NUM 4 ++ ++#define NPE_Q_STAT_STRINGS \ ++ {"RX ready to use queue len "}, \ ++ {"RX received queue len "}, \ ++ {"TX to be send queue len "}, \ ++ {"TX done queue len "}, ++ ++#define NPE_STAT_STRINGS \ ++ {"StatsAlignmentErrors "}, \ ++ {"StatsFCSErrors "}, \ ++ {"StatsInternalMacReceiveErrors "}, \ ++ {"RxOverrunDiscards "}, \ ++ {"RxLearnedEntryDiscards "}, \ ++ {"RxLargeFramesDiscards "}, \ ++ {"RxSTPBlockedDiscards "}, \ ++ {"RxVLANTypeFilterDiscards "}, \ ++ {"RxVLANIdFilterDiscards "}, \ ++ {"RxInvalidSourceDiscards "}, \ ++ {"RxBlackListDiscards "}, \ ++ {"RxWhiteListDiscards "}, \ ++ {"RxUnderflowEntryDiscards "}, \ ++ {"StatsSingleCollisionFrames "}, \ ++ {"StatsMultipleCollisionFrames "}, \ ++ {"StatsDeferredTransmissions "}, \ ++ {"StatsLateCollisions "}, \ ++ {"StatsExcessiveCollsions "}, \ ++ {"StatsInternalMacTransmitErrors"}, \ ++ {"StatsCarrierSenseErrors "}, \ ++ {"TxLargeFrameDiscards "}, \ ++ {"TxVLANIdFilterDiscards "}, \ ++\ ++ {"RxValidFramesTotalOctets "}, \ ++ {"RxUcastPkts "}, \ ++ {"RxBcastPkts "}, \ ++ {"RxMcastPkts "}, \ ++ {"RxPkts64Octets "}, \ ++ {"RxPkts65to127Octets "}, \ ++ {"RxPkts128to255Octets "}, \ ++ {"RxPkts256to511Octets "}, \ ++ {"RxPkts512to1023Octets "}, \ ++ {"RxPkts1024to1518Octets "}, \ ++ {"RxInternalNPEReceiveErrors "}, \ ++ {"TxInternalNPETransmitErrors "} ++ +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c 2007-02-21 02:24:46.000000000 -0800 +@@ -0,0 +1,850 @@ ++/* ++ * mac_driver.c - provide a network interface for each MAC ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/slab.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/dma-mapping.h> ++#include <linux/workqueue.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++ ++#include <linux/ixp_qmgr.h> ++#include <linux/ixp_npe.h> ++#include "mac.h" ++ ++#define MDIO_INTERVAL (3*HZ) ++#define RX_QUEUE_PREFILL 64 ++#define TX_QUEUE_PREFILL 16 ++ ++#define IXMAC_NAME "ixp4xx_mac" ++#define IXMAC_VERSION "0.3.1" ++ ++#define MAC_DEFAULT_REG(mac, name) \ ++ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT) ++ ++#define TX_DONE_QID 31 ++ ++#define DMA_ALLOC_SIZE 2048 ++#define DMA_HDR_SIZE (sizeof(struct npe_cont)) ++#define DMA_BUF_SIZE (DMA_ALLOC_SIZE - DMA_HDR_SIZE) ++ ++/* Since the NPEs use 1 Return Q for sent frames, we need a device ++ * independent return Q. We call it tx_doneq. ++ * It will be initialized during module load and uninitialized ++ * during module unload. Evil hack, but there is no choice :-( ++ */ ++ ++static struct qm_queue *tx_doneq = NULL; ++static int debug = -1; ++module_param(debug, int, 0); ++ ++static int init_buffer(struct qm_queue *queue, int count) ++{ ++ int i; ++ struct npe_cont *cont; ++ ++ for (i=0; i<count; i++) { ++ cont = kmalloc(DMA_ALLOC_SIZE, GFP_KERNEL | GFP_DMA); ++ if (!cont) ++ goto err; ++ ++ cont->phys = dma_map_single(queue->dev, cont, DMA_ALLOC_SIZE, ++ DMA_BIDIRECTIONAL); ++ if (dma_mapping_error(cont->phys)) ++ goto err; ++ ++ cont->data = cont+1; ++ /* now the buffer is on a 32 bit boundary. ++ * we add 2 bytes for good alignment to SKB */ ++ cont->data+=2; ++ cont->eth.next = 0; ++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); ++ cont->eth.pkt_len = 0; ++ /* also add 2 alignment bytes from cont->data*/ ++ cont->eth.phys_addr = cpu_to_npe32(cont->phys+ DMA_HDR_SIZE+ 2); ++ ++ dma_sync_single(queue->dev, cont->phys, DMA_HDR_SIZE, ++ DMA_TO_DEVICE); ++ ++ queue_put_entry(queue, cont->phys); ++ if (queue_stat(queue) == 2) { /* overflow */ ++ dma_unmap_single(queue->dev, cont->phys, DMA_ALLOC_SIZE, ++ DMA_BIDIRECTIONAL); ++ goto err; ++ } ++ } ++ return i; ++err: ++ if (cont) ++ kfree(cont); ++ return i; ++} ++ ++static int destroy_buffer(struct qm_queue *queue, int count) ++{ ++ u32 phys; ++ int i; ++ struct npe_cont *cont; ++ ++ for (i=0; i<count; i++) { ++ phys = queue_get_entry(queue) & ~0xf; ++ if (!phys) ++ break; ++ dma_unmap_single(queue->dev, phys, DMA_ALLOC_SIZE, ++ DMA_BIDIRECTIONAL); ++ cont = dma_to_virt(queue->dev, phys); ++ kfree(cont); ++ } ++ return i; ++} ++ ++static void mac_init(struct mac_info *mac) ++{ ++ MAC_DEFAULT_REG(mac, TX_CNTRL2); ++ MAC_DEFAULT_REG(mac, RANDOM_SEED); ++ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY); ++ MAC_DEFAULT_REG(mac, THRESH_P_FULL); ++ MAC_DEFAULT_REG(mac, TX_DEFER); ++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_1); ++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_2); ++ MAC_DEFAULT_REG(mac, SLOT_TIME); ++ MAC_DEFAULT_REG(mac, INT_CLK_THRESH); ++ MAC_DEFAULT_REG(mac, BUF_SIZE_TX); ++ MAC_DEFAULT_REG(mac, TX_CNTRL1); ++ MAC_DEFAULT_REG(mac, RX_CNTRL1); ++} ++ ++static void mac_set_uniaddr(struct net_device *dev) ++{ ++ int i; ++ struct mac_info *mac = netdev_priv(dev); ++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); ++ ++ /* check for multicast */ ++ if (dev->dev_addr[0] & 1) ++ return; ++ ++ npe_mh_setportaddr(npe, mac->plat, dev->dev_addr); ++ npe_mh_disable_firewall(npe, mac->plat); ++ for (i=0; i<dev->addr_len; i++) ++ mac_write_reg(mac, MAC_UNI_ADDR + i, dev->dev_addr[i]); ++} ++ ++static void update_duplex_mode(struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ if (netif_msg_link(mac)) { ++ printk(KERN_DEBUG "Link of %s is %s-duplex\n", dev->name, ++ mac->mii.full_duplex ? "full" : "half"); ++ } ++ if (mac->mii.full_duplex) { ++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX); ++ } else { ++ mac_set_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX); ++ } ++} ++ ++static int media_check(struct net_device *dev, int init) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ ++ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) { ++ update_duplex_mode(dev); ++ return 1; ++ } ++ return 0; ++} ++ ++static void get_npe_stats(struct mac_info *mac, u32 *buf, int len, int reset) ++{ ++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); ++ u32 phys; ++ ++ memset(buf, len, 0); ++ phys = dma_map_single(mac->npe_dev, buf, len, DMA_BIDIRECTIONAL); ++ npe_mh_get_stats(npe, mac->plat, phys, reset); ++ dma_unmap_single(mac->npe_dev, phys, len, DMA_BIDIRECTIONAL); ++} ++ ++static void irqcb_recv(struct qm_queue *queue) ++{ ++ struct net_device *dev = queue->cb_data; ++ ++ queue_ack_irq(queue); ++ queue_disable_irq(queue); ++ if (netif_running(dev)) ++ netif_rx_schedule(dev); ++} ++ ++int ix_recv(struct net_device *dev, int *budget, struct qm_queue *queue) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct sk_buff *skb; ++ u32 phys; ++ struct npe_cont *cont; ++ ++ while (*budget > 0 && netif_running(dev) ) { ++ int len; ++ phys = queue_get_entry(queue) & ~0xf; ++ if (!phys) ++ break; ++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, ++ DMA_FROM_DEVICE); ++ cont = dma_to_virt(queue->dev, phys); ++ len = npe_to_cpu16(cont->eth.pkt_len) -4; /* strip FCS */ ++ ++ if (unlikely(netif_msg_rx_status(mac))) { ++ printk(KERN_DEBUG "%s: RX packet size: %u\n", ++ dev->name, len); ++ queue_state(mac->rxq); ++ queue_state(mac->rxdoneq); ++ } ++ skb = dev_alloc_skb(len + 2); ++ if (likely(skb)) { ++ skb->dev = dev; ++ skb_reserve(skb, 2); ++ dma_sync_single(queue->dev, cont->eth.phys_addr, len, ++ DMA_FROM_DEVICE); ++#ifdef CONFIG_NPE_ADDRESS_COHERENT ++ /* swap the payload of the SKB */ ++ { ++ u32 *t = (u32*)(skb->data-2); ++ u32 *s = (u32*)(cont->data-2); ++ int i, j = (len+5)/4; ++ for (i=0; i<j; i++) ++ t[i] = cpu_to_be32(s[i]); ++ } ++#else ++ eth_copy_and_sum(skb, cont->data, len, 0); ++#endif ++ skb_put(skb, len); ++ skb->protocol = eth_type_trans(skb, dev); ++ dev->last_rx = jiffies; ++ netif_receive_skb(skb); ++ mac->stat.rx_packets++; ++ mac->stat.rx_bytes += skb->len; ++ } else { ++ mac->stat.rx_dropped++; ++ } ++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); ++ cont->eth.pkt_len = 0; ++ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, DMA_TO_DEVICE); ++ queue_put_entry(mac->rxq, phys); ++ dev->quota--; ++ (*budget)--; ++ } ++ ++ return !budget; ++} ++ ++static int ix_poll(struct net_device *dev, int *budget) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct qm_queue *queue = mac->rxdoneq; ++ ++ for (;;) { ++ if (ix_recv(dev, budget, queue)) ++ return 1; ++ netif_rx_complete(dev); ++ queue_enable_irq(queue); ++ if (!queue_len(queue)) ++ break; ++ queue_disable_irq(queue); ++ if (netif_rx_reschedule(dev, 0)) ++ break; ++ } ++ return 0; ++} ++ ++static void ixmac_set_rx_mode (struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct dev_mc_list *mclist; ++ u8 aset[dev->addr_len], aclear[dev->addr_len]; ++ int i,j; ++ ++ if (dev->flags & IFF_PROMISC) { ++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN); ++ } else { ++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN); ++ ++ mclist = dev->mc_list; ++ memset(aset, 0xff, dev->addr_len); ++ memset(aclear, 0x00, dev->addr_len); ++ for (i = 0; mclist && i < dev->mc_count; i++) { ++ for (j=0; j< dev->addr_len; j++) { ++ aset[j] &= mclist->dmi_addr[j]; ++ aclear[j] |= mclist->dmi_addr[j]; ++ } ++ mclist = mclist->next; ++ } ++ for (j=0; j< dev->addr_len; j++) { ++ aclear[j] = aset[j] | ~aclear[j]; ++ } ++ for (i=0; i<dev->addr_len; i++) { ++ mac_write_reg(mac, MAC_ADDR + i, aset[i]); ++ mac_write_reg(mac, MAC_ADDR_MASK + i, aclear[i]); ++ } ++ } ++} ++ ++static int ixmac_open (struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); ++ u32 buf[NPE_STAT_NUM]; ++ int i; ++ u32 phys; ++ ++ /* first check if the NPE is up and running */ ++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) { ++ printk(KERN_ERR "%s: %s not running\n", dev->name, ++ npe->plat->name); ++ return -EIO; ++ } ++ if (npe_mh_status(npe)) { ++ printk(KERN_ERR "%s: %s not responding\n", dev->name, ++ npe->plat->name); ++ return -EIO; ++ } ++ mac->txq_pkt += init_buffer(mac->txq, TX_QUEUE_PREFILL - mac->txq_pkt); ++ mac->rxq_pkt += init_buffer(mac->rxq, RX_QUEUE_PREFILL - mac->rxq_pkt); ++ ++ queue_enable_irq(mac->rxdoneq); ++ ++ /* drain all buffers from then RX-done-q to make the IRQ happen */ ++ while ((phys = queue_get_entry(mac->rxdoneq) & ~0xf)) { ++ struct npe_cont *cont; ++ cont = dma_to_virt(mac->rxdoneq->dev, phys); ++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); ++ cont->eth.pkt_len = 0; ++ dma_sync_single(mac->rxdoneq->dev, phys, DMA_HDR_SIZE, ++ DMA_TO_DEVICE); ++ queue_put_entry(mac->rxq, phys); ++ } ++ mac_init(mac); ++ npe_mh_set_rxqid(npe, mac->plat, mac->plat->rxdoneq_id); ++ get_npe_stats(mac, buf, sizeof(buf), 1); /* reset stats */ ++ get_npe_stats(mac, buf, sizeof(buf), 0); ++ /* ++ * if the extended stats contain random values ++ * the NPE image lacks extendet statistic counters ++ */ ++ for (i=NPE_STAT_NUM_BASE; i<NPE_STAT_NUM; i++) { ++ if (buf[i] >10000) ++ break; ++ } ++ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM; ++ mac->npe_stat_num += NPE_Q_STAT_NUM; ++ ++ mac_set_uniaddr(dev); ++ media_check(dev, 1); ++ ixmac_set_rx_mode(dev); ++ netif_start_queue(dev); ++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL); ++ if (netif_msg_ifup(mac)) { ++ printk(KERN_DEBUG "%s: open " IXMAC_NAME ++ " RX queue %d bufs, TX queue %d bufs\n", ++ dev->name, mac->rxq_pkt, mac->txq_pkt); ++ } ++ return 0; ++} ++ ++static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct npe_cont *cont; ++ u32 phys; ++ struct qm_queue *queue = mac->txq; ++ ++ if (unlikely(skb->len > DMA_BUF_SIZE)) { ++ dev_kfree_skb(skb); ++ mac->stat.tx_errors++; ++ return NETDEV_TX_OK; ++ } ++ phys = queue_get_entry(tx_doneq) & ~0xf; ++ if (!phys) ++ goto busy; ++ cont = dma_to_virt(queue->dev, phys); ++#ifdef CONFIG_NPE_ADDRESS_COHERENT ++ /* swap the payload of the SKB */ ++ { ++ u32 *s = (u32*)(skb->data-2); ++ u32 *t = (u32*)(cont->data-2); ++ int i,j = (skb->len+5) / 4; ++ for (i=0; i<j; i++) ++ t[i] = cpu_to_be32(s[i]); ++ } ++#else ++ //skb_copy_and_csum_dev(skb, cont->data); ++ memcpy(cont->data, skb->data, skb->len); ++#endif ++ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); ++ cont->eth.pkt_len = cpu_to_npe16(skb->len); ++ /* disable VLAN functions in NPE image for now */ ++ cont->eth.flags = 0; ++ dma_sync_single(queue->dev, phys, skb->len + DMA_HDR_SIZE, ++ DMA_TO_DEVICE); ++ queue_put_entry(queue, phys); ++ if (queue_stat(queue) == 2) { /* overflow */ ++ queue_put_entry(tx_doneq, phys); ++ goto busy; ++ } ++ dev_kfree_skb(skb); ++ ++ mac->stat.tx_packets++; ++ mac->stat.tx_bytes += skb->len; ++ dev->trans_start = jiffies; ++ if (netif_msg_tx_queued(mac)) { ++ printk(KERN_DEBUG "%s: TX packet size %u\n", ++ dev->name, skb->len); ++ queue_state(mac->txq); ++ queue_state(tx_doneq); ++ } ++ return NETDEV_TX_OK; ++busy: ++ return NETDEV_TX_BUSY; ++} ++ ++static int ixmac_close (struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ ++ netif_stop_queue (dev); ++ queue_disable_irq(mac->rxdoneq); ++ ++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt); ++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt); ++ ++ cancel_rearming_delayed_work(&(mac->mdio_thread)); ++ ++ if (netif_msg_ifdown(mac)) { ++ printk(KERN_DEBUG "%s: close " IXMAC_NAME ++ " RX queue %d bufs, TX queue %d bufs\n", ++ dev->name, mac->rxq_pkt, mac->txq_pkt); ++ } ++ return 0; ++} ++ ++static int ixmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ int rc, duplex_changed; ++ ++ if (!netif_running(dev)) ++ return -EINVAL; ++ if (!try_module_get(THIS_MODULE)) ++ return -ENODEV; ++ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); ++ module_put(THIS_MODULE); ++ if (duplex_changed) ++ update_duplex_mode(dev); ++ return rc; ++} ++ ++static struct net_device_stats *ixmac_stats (struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ return &mac->stat; ++} ++ ++static void ixmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); ++ ++ strcpy(info->driver, IXMAC_NAME); ++ strcpy(info->version, IXMAC_VERSION); ++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { ++ snprintf(info->fw_version, 32, "%d.%d func [%d]", ++ npe->img_info[2], npe->img_info[3], npe->img_info[1]); ++ } ++ strncpy(info->bus_info, npe->plat->name, ETHTOOL_BUSINFO_LEN); ++} ++ ++static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ mii_ethtool_gset(&mac->mii, cmd); ++ return 0; ++} ++ ++static int ixmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ int rc; ++ rc = mii_ethtool_sset(&mac->mii, cmd); ++ return rc; ++} ++ ++static int ixmac_nway_reset(struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ return mii_nway_restart(&mac->mii); ++} ++ ++static u32 ixmac_get_link(struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ return mii_link_ok(&mac->mii); ++} ++ ++static const int mac_reg_list[] = MAC_REG_LIST; ++ ++static int ixmac_get_regs_len(struct net_device *dev) ++{ ++ return ARRAY_SIZE(mac_reg_list); ++} ++ ++static void ++ixmac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) ++{ ++ int i; ++ struct mac_info *mac = netdev_priv(dev); ++ u8 *buf = regbuf; ++ ++ for (i=0; i<regs->len; i++) { ++ buf[i] = mac_read_reg(mac, mac_reg_list[i]); ++ } ++} ++ ++static struct { ++ const char str[ETH_GSTRING_LEN]; ++} ethtool_stats_keys[NPE_STAT_NUM + NPE_Q_STAT_NUM] = { ++ NPE_Q_STAT_STRINGS ++ NPE_STAT_STRINGS ++}; ++ ++static void ixmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ memcpy(data, ethtool_stats_keys, mac->npe_stat_num * ETH_GSTRING_LEN); ++} ++ ++static int ixmac_get_stats_count(struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ return mac->npe_stat_num; ++} ++ ++static u32 ixmac_get_msglevel(struct net_device *dev) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ return mac->msg_enable; ++} ++ ++static void ixmac_set_msglevel(struct net_device *dev, u32 datum) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ mac->msg_enable = datum; ++} ++ ++static void ixmac_get_ethtool_stats(struct net_device *dev, ++ struct ethtool_stats *stats, u64 *data) ++{ ++ int i; ++ struct mac_info *mac = netdev_priv(dev); ++ u32 buf[NPE_STAT_NUM]; ++ ++ data[0] = queue_len(mac->rxq); ++ data[1] = queue_len(mac->rxdoneq); ++ data[2] = queue_len(mac->txq); ++ data[3] = queue_len(tx_doneq); ++ ++ get_npe_stats(mac, buf, sizeof(buf), 0); ++ ++ for (i=0; i<stats->n_stats-4; i++) { ++ data[i+4] = npe_to_cpu32(buf[i]); ++ } ++} ++ ++static struct ethtool_ops ixmac_ethtool_ops = { ++ .get_drvinfo = ixmac_get_drvinfo, ++ .get_settings = ixmac_get_settings, ++ .set_settings = ixmac_set_settings, ++ .nway_reset = ixmac_nway_reset, ++ .get_link = ixmac_get_link, ++ .get_msglevel = ixmac_get_msglevel, ++ .set_msglevel = ixmac_set_msglevel, ++ .get_regs_len = ixmac_get_regs_len, ++ .get_regs = ixmac_get_regs, ++ .get_perm_addr = ethtool_op_get_perm_addr, ++ .get_strings = ixmac_get_strings, ++ .get_stats_count = ixmac_get_stats_count, ++ .get_ethtool_stats = ixmac_get_ethtool_stats, ++}; ++ ++static void mac_mdio_thread(struct work_struct *work) ++{ ++ struct mac_info *mac = container_of(work, struct mac_info, ++ mdio_thread.work); ++ struct net_device *dev = mac->netdev; ++ ++ media_check(dev, 0); ++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL); ++} ++ ++static int mac_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct mac_info *mac; ++ struct net_device *dev; ++ struct npe_info *npe; ++ struct mac_plat_info *plat = pdev->dev.platform_data; ++ int size, ret; ++ ++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) { ++ return -EIO; ++ } ++ if (!(dev = alloc_etherdev (sizeof(struct mac_info)))) { ++ return -ENOMEM; ++ } ++ SET_MODULE_OWNER(dev); ++ SET_NETDEV_DEV(dev, &pdev->dev); ++ mac = netdev_priv(dev); ++ mac->netdev = dev; ++ ++ size = res->end - res->start +1; ++ mac->res = request_mem_region(res->start, size, IXMAC_NAME); ++ if (!mac->res) { ++ ret = -EBUSY; ++ goto out_free; ++ } ++ ++ mac->addr = ioremap(res->start, size); ++ if (!mac->addr) { ++ ret = -ENOMEM; ++ goto out_rel; ++ } ++ ++ dev->open = ixmac_open; ++ dev->hard_start_xmit = ixmac_start_xmit; ++ dev->poll = ix_poll; ++ dev->stop = ixmac_close; ++ dev->get_stats = ixmac_stats; ++ dev->do_ioctl = ixmac_ioctl; ++ dev->set_multicast_list = ixmac_set_rx_mode; ++ dev->ethtool_ops = &ixmac_ethtool_ops; ++ ++ dev->weight = 16; ++ dev->tx_queue_len = 100; ++ ++ mac->npe_dev = get_npe_by_id(plat->npe_id); ++ if (!mac->npe_dev) { ++ ret = -EIO; ++ goto out_unmap; ++ } ++ npe = dev_get_drvdata(mac->npe_dev); ++ ++ mac->rxq = request_queue(plat->rxq_id, 128); ++ if (IS_ERR(mac->rxq)) { ++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxq_id); ++ ret = -EBUSY; ++ goto out_putmod; ++ } ++ mac->txq = request_queue(plat->txq_id, 128); ++ if (IS_ERR(mac->txq)) { ++ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id); ++ ret = -EBUSY; ++ goto out_putmod; ++ } ++ mac->rxdoneq = request_queue(plat->rxdoneq_id, 128); ++ if (IS_ERR(mac->rxdoneq)) { ++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxdoneq_id); ++ ret = -EBUSY; ++ goto out_putmod; ++ } ++ mac->rxdoneq->irq_cb = irqcb_recv; ++ mac->rxdoneq->cb_data = dev; ++ queue_set_watermarks(mac->rxdoneq, 0, 0); ++ queue_set_irq_src(mac->rxdoneq, Q_IRQ_ID_NOT_E); ++ ++ mac->qmgr = dev_get_drvdata(mac->rxq->dev); ++ if (register_netdev (dev)) { ++ ret = -EIO; ++ goto out_putmod; ++ } ++ ++ mac->plat = plat; ++ mac->npe_stat_num = NPE_STAT_NUM_BASE; ++ mac->msg_enable = netif_msg_init(debug, MAC_DEF_MSG_ENABLE); ++ ++ platform_set_drvdata(pdev, dev); ++ ++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET); ++ udelay(500); ++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_MDC_EN); ++ ++ init_mdio(dev, plat->phy_id); ++ ++ INIT_DELAYED_WORK(&mac->mdio_thread, mac_mdio_thread); ++ ++ /* The place of the MAC address is very system dependent. ++ * Here we use a random one to be replaced by one of the ++ * following commands: ++ * "ip link set address 02:03:04:04:04:01 dev eth0" ++ * "ifconfig eth0 hw ether 02:03:04:04:04:07" ++ */ ++ ++ if (is_zero_ether_addr(plat->hwaddr)) { ++ random_ether_addr(dev->dev_addr); ++ dev->dev_addr[5] = plat->phy_id; ++ } ++ else ++ memcpy(dev->dev_addr, plat->hwaddr, 6); ++ ++ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION ++ ": %s on %s with PHY[%d] initialized\n", ++ dev->name, npe->plat->name, plat->phy_id); ++ ++ return 0; ++ ++out_putmod: ++ if (mac->rxq) ++ release_queue(mac->rxq); ++ if (mac->txq) ++ release_queue(mac->txq); ++ if (mac->rxdoneq) ++ release_queue(mac->rxdoneq); ++ module_put(mac->npe_dev->driver->owner); ++out_unmap: ++ iounmap(mac->addr); ++out_rel: ++ release_resource(mac->res); ++out_free: ++ kfree(mac); ++ return ret; ++} ++ ++static void drain_npe(struct mac_info *mac) ++{ ++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); ++ struct npe_cont *cont; ++ u32 phys; ++ int loop = 0; ++ ++ /* Now there are some skb hold by the NPE. ++ * We switch the MAC in loopback mode and send a pseudo packet ++ * that will be returned by the NPE in its last SKB. ++ * We will also try to isolate the PHY to keep the packets internal. ++ */ ++ ++ if (mac->txq_pkt <2) ++ mac->txq_pkt += init_buffer(tx_doneq, 5); ++ ++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { ++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN); ++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN); ++ ++ npe_mh_npe_loopback_mode(npe, mac->plat, 1); ++ mdelay(200); ++ ++ while (mac->rxq_pkt && loop++ < 2000 ) { ++ phys = queue_get_entry(tx_doneq) & ~0xf; ++ if (!phys) ++ break; ++ cont = dma_to_virt(queue->dev, phys); ++ /* actually the packets should never leave the system, ++ * but if they do, they shall contain 0s instead of ++ * intresting random data.... ++ */ ++ memset(cont->data, 0, 64); ++ cont->eth.pkt_len = 64; ++ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE, ++ DMA_TO_DEVICE); ++ queue_put_entry(mac->txq, phys); ++ if (queue_stat(mac->txq) == 2) { /* overflow */ ++ queue_put_entry(tx_doneq, phys); ++ break; ++ } ++ mdelay(1); ++ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq, ++ mac->rxq_pkt); ++ } ++ npe_mh_npe_loopback_mode(npe, mac->plat, 0); ++ } ++ /* Flush MAC TX fifo to drain the bogus packages */ ++ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); ++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN); ++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN); ++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN); ++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); ++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); ++} ++ ++static int mac_remove(struct platform_device *pdev) ++{ ++ struct net_device* dev = platform_get_drvdata(pdev); ++ struct mac_info *mac = netdev_priv(dev); ++ ++ unregister_netdev(dev); ++ ++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt); ++ if (mac->rxq_pkt) ++ drain_npe(mac); ++ ++ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt); ++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt); ++ ++ if (mac->rxq_pkt || mac->txq_pkt) ++ printk("Buffers lost in NPE: RX:%d, TX:%d\n", ++ mac->rxq_pkt, mac->txq_pkt); ++ ++ release_queue(mac->txq); ++ release_queue(mac->rxq); ++ release_queue(mac->rxdoneq); ++ ++ flush_scheduled_work(); ++ return_npe_dev(mac->npe_dev); ++ ++ iounmap(mac->addr); ++ release_resource(mac->res); ++ platform_set_drvdata(pdev, NULL); ++ free_netdev(dev); ++ return 0; ++} ++ ++static struct platform_driver ixp4xx_mac = { ++ .driver.name = IXMAC_NAME, ++ .probe = mac_probe, ++ .remove = mac_remove, ++}; ++ ++static int __init init_mac(void) ++{ ++ /* The TX done Queue handles skbs sent out by the NPE */ ++ tx_doneq = request_queue(TX_DONE_QID, 128); ++ if (IS_ERR(tx_doneq)) { ++ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID); ++ return -EBUSY; ++ } ++ return platform_driver_register(&ixp4xx_mac); ++} ++ ++static void __exit finish_mac(void) ++{ ++ platform_driver_unregister(&ixp4xx_mac); ++ if (tx_doneq) { ++ release_queue(tx_doneq); ++ } ++} ++ ++module_init(init_mac); ++module_exit(finish_mac); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); ++ +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,291 @@ ++ ++#include <linux/ixp_npe.h> ++#include <asm/hardware.h> ++ ++#define RESET_NPE_PARITY 0x0800 ++#define PARITY_BIT_MASK 0x3F00FFFF ++#define CONFIG_CTRL_REG_MASK 0x3F3FFFFF ++#define MAX_RETRIES 1000000 ++#define NPE_PHYS_REG 32 ++#define RESET_MBST_VAL 0x0000F0F0 ++#define NPE_REGMAP 0x0000001E ++#define INSTR_WR_REG_SHORT 0x0000C000 ++#define INSTR_WR_REG_BYTE 0x00004000 ++#define MASK_ECS_REG_0_NEXTPC 0x1FFF0000 ++ ++#define INSTR_RD_FIFO 0x0F888220 ++#define INSTR_RESET_MBOX 0x0FAC8210 ++ ++#define ECS_REG_0_LDUR 8 ++#define ECS_REG_1_CCTXT 16 ++#define ECS_REG_1_SELCTXT 0 ++ ++#define ECS_BG_CTXT_REG_0 0x00 ++#define ECS_BG_CTXT_REG_1 0x01 ++#define ECS_BG_CTXT_REG_2 0x02 ++#define ECS_PRI_1_CTXT_REG_0 0x04 ++#define ECS_PRI_1_CTXT_REG_1 0x05 ++#define ECS_PRI_1_CTXT_REG_2 0x06 ++#define ECS_PRI_2_CTXT_REG_0 0x08 ++#define ECS_PRI_2_CTXT_REG_1 0x09 ++#define ECS_PRI_2_CTXT_REG_2 0x0A ++#define ECS_DBG_CTXT_REG_0 0x0C ++#define ECS_DBG_CTXT_REG_1 0x0D ++#define ECS_DBG_CTXT_REG_2 0x0E ++#define ECS_INSTRUCT_REG 0x11 ++ ++#define ECS_BG_CTXT_REG_0_RESET 0xA0000000 ++#define ECS_BG_CTXT_REG_1_RESET 0x01000000 ++#define ECS_BG_CTXT_REG_2_RESET 0x00008000 ++#define ECS_PRI_1_CTXT_REG_0_RESET 0x20000080 ++#define ECS_PRI_1_CTXT_REG_1_RESET 0x01000000 ++#define ECS_PRI_1_CTXT_REG_2_RESET 0x00008000 ++#define ECS_PRI_2_CTXT_REG_0_RESET 0x20000080 ++#define ECS_PRI_2_CTXT_REG_1_RESET 0x01000000 ++#define ECS_PRI_2_CTXT_REG_2_RESET 0x00008000 ++#define ECS_DBG_CTXT_REG_0_RESET 0x20000000 ++#define ECS_DBG_CTXT_REG_1_RESET 0x00000000 ++#define ECS_DBG_CTXT_REG_2_RESET 0x001E0000 ++#define ECS_INSTRUCT_REG_RESET 0x1003C00F ++ ++static struct { u32 reg; u32 val; } ecs_reset[] = ++{ ++ { ECS_BG_CTXT_REG_0, ECS_BG_CTXT_REG_0_RESET }, ++ { ECS_BG_CTXT_REG_1, ECS_BG_CTXT_REG_1_RESET }, ++ { ECS_BG_CTXT_REG_2, ECS_BG_CTXT_REG_2_RESET }, ++ { ECS_PRI_1_CTXT_REG_0, ECS_PRI_1_CTXT_REG_0_RESET }, ++ { ECS_PRI_1_CTXT_REG_1, ECS_PRI_1_CTXT_REG_1_RESET }, ++ { ECS_PRI_1_CTXT_REG_2, ECS_PRI_1_CTXT_REG_2_RESET }, ++ { ECS_PRI_2_CTXT_REG_0, ECS_PRI_2_CTXT_REG_0_RESET }, ++ { ECS_PRI_2_CTXT_REG_1, ECS_PRI_2_CTXT_REG_1_RESET }, ++ { ECS_PRI_2_CTXT_REG_2, ECS_PRI_2_CTXT_REG_2_RESET }, ++ { ECS_DBG_CTXT_REG_0, ECS_DBG_CTXT_REG_0_RESET }, ++ { ECS_DBG_CTXT_REG_1, ECS_DBG_CTXT_REG_1_RESET }, ++ { ECS_DBG_CTXT_REG_2, ECS_DBG_CTXT_REG_2_RESET }, ++ { ECS_INSTRUCT_REG, ECS_INSTRUCT_REG_RESET } ++}; ++ ++/* actually I have no idea what I'm doing here !! ++ * I only rewrite the "reset" sequence the way Intel does it. ++ */ ++ ++static void npe_debg_preexec(struct npe_info *npe) ++{ ++ u32 r = IX_NPEDL_MASK_ECS_DBG_REG_2_IF | IX_NPEDL_MASK_ECS_DBG_REG_2_IE; ++ ++ npe->exec_count = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCT); ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, 0); ++ npe->ctx_reg2 = npe_read_ecs_reg(npe, ECS_DBG_CTXT_REG_2); ++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2 | r); ++} ++ ++static void npe_debg_postexec(struct npe_info *npe) ++{ ++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0, 0); ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, npe->exec_count); ++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2); ++} ++ ++static int ++npe_debg_inst_exec(struct npe_info *npe, u32 instr, u32 ctx, u32 ldur) ++{ ++ u32 regval, wc; ++ int c = 0; ++ ++ regval = IX_NPEDL_MASK_ECS_REG_0_ACTIVE | ++ (ldur << ECS_REG_0_LDUR); ++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0 , regval); ++ /* set CCTXT at ECS DEBUG L3 to specify in which context ++ * to execute the instruction ++ */ ++ regval = (ctx << ECS_REG_1_CCTXT) | ++ (ctx << ECS_REG_1_SELCTXT); ++ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_1, regval); ++ ++ /* clear the pipeline */ ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); ++ ++ /* load NPE instruction into the instruction register */ ++ npe_write_ecs_reg(npe, ECS_INSTRUCT_REG, instr); ++ /* we need this value later to wait for ++ * completion of NPE execution step ++ */ ++ wc = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC); ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STEP); ++ ++ /* Watch Count register increments when NPE completes an instruction */ ++ while (wc == npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC) && ++ ++c < MAX_RETRIES); ++ ++ if (c >= MAX_RETRIES) { ++ printk(KERN_ERR "%s reset:npe_debg_inst_exec(): Timeout\n", ++ npe->plat->name); ++ return 1; ++ } ++ return 0; ++} ++ ++static int npe_logical_reg_write8(struct npe_info *npe, u32 addr, u32 val) ++{ ++ u32 instr; ++ val &= 0xff; ++ /* here we build the NPE assembler instruction: ++ * mov8 d0, #0 */ ++ instr = INSTR_WR_REG_BYTE | /* OpCode */ ++ addr << 9 | /* base Operand */ ++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */ ++ (val & ~0x1f) << (18-5);/* higher 3 bits to CoProc instr. */ ++ /* and execute it */ ++ return npe_debg_inst_exec(npe, instr, 0, 1); ++} ++ ++static int npe_logical_reg_write16(struct npe_info *npe, u32 addr, u32 val) ++{ ++ u32 instr; ++ /* here we build the NPE assembler instruction: ++ * mov16 d0, #0 */ ++ val &= 0xffff; ++ instr = INSTR_WR_REG_SHORT | /* OpCode */ ++ addr << 9 | /* base Operand */ ++ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */ ++ (val & ~0x1f) << (18-5);/* higher 11 bits to CoProc instr. */ ++ /* and execute it */ ++ return npe_debg_inst_exec(npe, instr, 0, 1); ++} ++ ++static int npe_logical_reg_write32(struct npe_info *npe, u32 addr, u32 val) ++{ ++ /* write in 16 bit steps first the high and then the low value */ ++ npe_logical_reg_write16(npe, addr, val >> 16); ++ return npe_logical_reg_write16(npe, addr+2, val & 0xffff); ++} ++ ++void npe_reset(struct npe_info *npe) ++{ ++ u32 reg, cfg_ctrl; ++ int i; ++ struct { u32 reset; int addr; int size; } ctx_reg[] = { ++ { 0x80, 0x1b, 8 }, ++ { 0, 0x1c, 16 }, ++ { 0x820, 0x1e, 16 }, ++ { 0, 0x1f, 8 } ++ }, *cr; ++ ++ cfg_ctrl = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL); ++ cfg_ctrl |= 0x3F000000; ++ /* disable the parity interrupt */ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, cfg_ctrl & PARITY_BIT_MASK); ++ ++ npe_debg_preexec(npe); ++ ++ /* clear the FIFOs */ ++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WFIFO) == ++ IX_NPEDL_MASK_WFIFO_VALID); ++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) == ++ IX_NPEDL_MASK_STAT_OFNE) ++ { ++ u32 reg; ++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_FIFO); ++ printk("%s reset: Read FIFO:=%x\n", npe->plat->name, reg); ++ } ++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) == ++ IX_NPEDL_MASK_STAT_IFNE) { ++ npe_debg_inst_exec(npe, INSTR_RD_FIFO, 0, 0); ++ } ++ ++ /* Reset the mailbox reg */ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_MBST, RESET_MBST_VAL); ++ npe_debg_inst_exec(npe, INSTR_RESET_MBOX, 0, 0); ++ ++ /* Reset the physical registers in the NPE register file */ ++ for (i=0; i<NPE_PHYS_REG; i++) { ++ npe_logical_reg_write16(npe, NPE_REGMAP, i >> 1); ++ npe_logical_reg_write32(npe, (i&1) *4, 0); ++ } ++ ++ /* Reset the context store. Iterate over the 16 ctx s */ ++ for(i=0; i<16; i++) { ++ for (reg=0; reg<4; reg++) { ++ /* There is no (STEVT) register for Context 0. ++ * ignore if register=0 and ctx=0 */ ++ if (!(reg || i)) ++ continue; ++ /* Context 0 has no STARTPC. Instead, this value is ++ * used to set NextPC for Background ECS, ++ * to set where NPE starts executing code ++ */ ++ if (!i && reg==1) { ++ u32 r; ++ r = npe_read_ecs_reg(npe, ECS_BG_CTXT_REG_0); ++ r &= ~MASK_ECS_REG_0_NEXTPC; ++ r |= (cr->reset << 16) & MASK_ECS_REG_0_NEXTPC; ++ continue; ++ } ++ cr = ctx_reg + reg; ++ switch (cr->size) { ++ case 8: ++ npe_logical_reg_write8(npe, cr->addr, ++ cr->reset); ++ break; ++ case 16: ++ npe_logical_reg_write16(npe, cr->addr, ++ cr->reset); ++ } ++ } ++ } ++ npe_debg_postexec(npe); ++ ++ for (i=0; i< ARRAY_SIZE(ecs_reset); i++) { ++ npe_write_ecs_reg(npe, ecs_reset[i].reg, ecs_reset[i].val); ++ } ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT); ++ ++ for (i=IX_NPEDL_REG_OFFSET_EXCT; i<=IX_NPEDL_REG_OFFSET_AP3; i+=4) { ++ npe_reg_write(npe, i, 0); ++ } ++ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_WC, 0); ++ ++ reg = *IXP4XX_EXP_CFG2; ++ reg |= 0x800 << npe->plat->id; /* IX_FUSE_NPE[ABC] */ ++ *IXP4XX_EXP_CFG2 = reg; ++ reg &= ~(0x800 << npe->plat->id); /* IX_FUSE_NPE[ABC] */ ++ *IXP4XX_EXP_CFG2 = reg; ++ ++ npe_stop(npe); ++ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, ++ cfg_ctrl & CONFIG_CTRL_REG_MASK); ++ npe->loaded = 0; ++} ++ ++ ++void npe_stop(struct npe_info *npe) ++{ ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP); ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); ++} ++ ++static void npe_reset_active(struct npe_info *npe, u32 reg) ++{ ++ u32 regval; ++ ++ regval = npe_read_ecs_reg(npe, reg); ++ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; ++ npe_write_ecs_reg(npe, reg, regval); ++} ++ ++void npe_start(struct npe_info *npe) ++{ ++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0); ++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0); ++ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0); ++ ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); ++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START); ++} ++ ++EXPORT_SYMBOL(npe_stop); ++EXPORT_SYMBOL(npe_start); ++EXPORT_SYMBOL(npe_reset); +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,170 @@ ++/* ++ * npe_mh.c - NPE message handler. ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/ixp_npe.h> ++#include <linux/slab.h> ++ ++#define MAX_RETRY 200 ++ ++struct npe_mh_msg { ++ union { ++ u8 byte[8]; /* Very desciptive name, I know ... */ ++ u32 data[2]; ++ } u; ++}; ++ ++/* ++ * The whole code in this function must be reworked. ++ * It is in a state that works but is not rock solid ++ */ ++static int send_message(struct npe_info *npe, struct npe_mh_msg *msg) ++{ ++ int i,j; ++ u32 send[2], recv[2]; ++ ++ for (i=0; i<2; i++) ++ send[i] = be32_to_cpu(msg->u.data[i]); ++ ++ if ((npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & ++ IX_NPEMH_NPE_STAT_IFNE)) ++ return -1; ++ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[0]); ++ for(i=0; i<MAX_RETRY; i++) { ++ /* if the IFNF status bit is unset then the inFIFO is full */ ++ if (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & ++ IX_NPEMH_NPE_STAT_IFNF) ++ break; ++ } ++ if (i>=MAX_RETRY) ++ return -1; ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[1]); ++ i=0; ++ while (!(npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & ++ IX_NPEMH_NPE_STAT_OFNE)) { ++ if (i++>MAX_RETRY) { ++ printk("Waiting for Output FIFO NotEmpty failed\n"); ++ return -1; ++ } ++ } ++ //printk("Output FIFO Not Empty. Loops: %d\n", i); ++ j=0; ++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & ++ IX_NPEMH_NPE_STAT_OFNE) { ++ recv[j&1] = npe_reg_read(npe,IX_NPEDL_REG_OFFSET_FIFO); ++ j++; ++ } ++ if ((recv[0] != send[0]) || (recv[1] != send[1])) { ++ if (send[0] || send[1]) { ++ /* all CMDs return the complete message as answer, ++ * only GETSTATUS returns the ImageID of the NPE ++ */ ++ printk("Unexpected answer: " ++ "Send %08x:%08x Ret %08x:%08x\n", ++ send[0], send[1], recv[0], recv[1]); ++ } ++ } ++ return 0; ++} ++ ++#define CMD 0 ++#define PORT 1 ++#define MAC 2 ++ ++#define IX_ETHNPE_NPE_GETSTATUS 0x00 ++#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01 ++#define IX_ETHNPE_GETSTATS 0x04 ++#define IX_ETHNPE_RESETSTATS 0x05 ++#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E ++#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B ++#define IX_ETHNPE_SETLOOPBACK_MODE 0x12 ++ ++#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf)) ++ ++int npe_mh_status(struct npe_info *npe) ++{ ++ struct npe_mh_msg msg; ++ ++ memset(&msg, 0, sizeof(msg)); ++ msg.u.byte[CMD] = IX_ETHNPE_NPE_GETSTATUS; ++ return send_message(npe, &msg); ++} ++ ++int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, ++ u8 *macaddr) ++{ ++ struct npe_mh_msg msg; ++ ++ msg.u.byte[CMD] = IX_ETHNPE_EDB_SETPORTADDRESS; ++ msg.u.byte[PORT] = mp->eth_id; ++ memcpy(msg.u.byte + MAC, macaddr, 6); ++ ++ return send_message(npe, &msg); ++} ++ ++int npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp) ++{ ++ struct npe_mh_msg msg; ++ ++ memset(&msg, 0, sizeof(msg)); ++ msg.u.byte[CMD] = IX_ETHNPE_FW_SETFIREWALLMODE; ++ msg.u.byte[PORT] = logical_id(mp); ++ ++ return send_message(npe, &msg); ++} ++ ++int npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, ++ int enable) ++{ ++ struct npe_mh_msg msg; ++ ++ memset(&msg, 0, sizeof(msg)); ++ msg.u.byte[CMD] = IX_ETHNPE_SETLOOPBACK_MODE; ++ msg.u.byte[PORT] = logical_id(mp); ++ msg.u.byte[3] = enable ? 1 : 0; ++ ++ return send_message(npe, &msg); ++} ++ ++int npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid) ++{ ++ struct npe_mh_msg msg; ++ int i, ret; ++ ++ memset(&msg, 0, sizeof(msg)); ++ msg.u.byte[CMD] = IX_ETHNPE_VLAN_SETRXQOSENTRY; ++ msg.u.byte[PORT] = logical_id(mp); ++ msg.u.byte[5] = qid | 0x80; ++ msg.u.byte[7] = qid<<4; ++ for(i=0; i<8; i++) { ++ msg.u.byte[3] = i; ++ if ((ret = send_message(npe, &msg))) ++ return ret; ++ } ++ return 0; ++} ++ ++int npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, ++ int reset) ++{ ++ struct npe_mh_msg msg; ++ memset(&msg, 0, sizeof(msg)); ++ msg.u.byte[CMD] = reset ? IX_ETHNPE_RESETSTATS : IX_ETHNPE_GETSTATS; ++ msg.u.byte[PORT] = logical_id(mp); ++ msg.u.data[1] = cpu_to_npe32(cpu_to_be32(phys)); ++ ++ return send_message(npe, &msg); ++} ++ ++ ++EXPORT_SYMBOL(npe_mh_status); ++EXPORT_SYMBOL(npe_mh_setportaddr); ++EXPORT_SYMBOL(npe_mh_disable_firewall); ++EXPORT_SYMBOL(npe_mh_set_rxqid); ++EXPORT_SYMBOL(npe_mh_npe_loopback_mode); ++EXPORT_SYMBOL(npe_mh_get_stats); +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,113 @@ ++/* ++ * phy.c - MDIO functions and mii initialisation ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++ ++#include <linux/mutex.h> ++#include "mac.h" ++ ++#define MAX_PHYS (1<<5) ++ ++/* ++ * We must always use the same MAC for acessing the MDIO ++ * We may not use each MAC for its PHY :-( ++ */ ++ ++static struct net_device *phy_dev = NULL; ++static struct mutex mtx; ++ ++/* here we remember if the PHY is alive, to avoid log dumping */ ++static int phy_works[MAX_PHYS]; ++ ++int mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg) ++{ ++ struct mac_info *mac; ++ u32 cmd, reg; ++ int cnt = 0; ++ ++ if (!phy_dev) ++ return 0; ++ ++ mac = netdev_priv(phy_dev); ++ cmd = mdio_cmd(phy_addr, phy_reg); ++ mutex_lock_interruptible(&mtx); ++ mac_mdio_cmd_write(mac, cmd); ++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) { ++ if (++cnt >= 100) { ++ printk("%s: PHY[%d] access failed\n", ++ dev->name, phy_addr); ++ break; ++ } ++ schedule(); ++ } ++ reg = mac_mdio_status_read(mac); ++ mutex_unlock(&mtx); ++ if (reg & MII_READ_FAIL) { ++ if (phy_works[phy_addr]) { ++ printk("%s: PHY[%d] unresponsive\n", ++ dev->name, phy_addr); ++ } ++ reg = 0; ++ phy_works[phy_addr] = 0; ++ } else { ++ if ( !phy_works[phy_addr]) { ++ printk("%s: PHY[%d] responsive again\n", ++ dev->name, phy_addr); ++ } ++ phy_works[phy_addr] = 1; ++ } ++ return reg & 0xffff; ++} ++ ++void ++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val) ++{ ++ struct mac_info *mac; ++ u32 cmd; ++ int cnt=0; ++ ++ if (!phy_dev) ++ return; ++ ++ mac = netdev_priv(phy_dev); ++ cmd = mdio_cmd(phy_addr, phy_reg) | MII_WRITE | val; ++ ++ mutex_lock_interruptible(&mtx); ++ mac_mdio_cmd_write(mac, cmd); ++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) { ++ if (++cnt >= 100) { ++ printk("%s: PHY[%d] access failed\n", ++ dev->name, phy_addr); ++ break; ++ } ++ schedule(); ++ } ++ mutex_unlock(&mtx); ++} ++ ++void init_mdio(struct net_device *dev, int phy_id) ++{ ++ struct mac_info *mac = netdev_priv(dev); ++ int i; ++ ++ /* All phy operations should use the same MAC ++ * (my experience) ++ */ ++ if (mac->plat->eth_id == 0) { ++ mutex_init(&mtx); ++ phy_dev = dev; ++ for (i=0; i<MAX_PHYS; i++) ++ phy_works[i] = 1; ++ } ++ mac->mii.dev = dev; ++ mac->mii.phy_id = phy_id; ++ mac->mii.phy_id_mask = MAX_PHYS - 1; ++ mac->mii.reg_num_mask = 0x1f; ++ mac->mii.mdio_read = mdio_read_register; ++ mac->mii.mdio_write = mdio_write_register; ++} ++ +Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,479 @@ ++/* ++ * ucode_dl.c - provide an NPE device and a char-dev for microcode download ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/miscdevice.h> ++#include <linux/platform_device.h> ++#include <linux/fs.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/firmware.h> ++#include <linux/dma-mapping.h> ++#include <linux/byteorder/swab.h> ++#include <asm/uaccess.h> ++#include <asm/io.h> ++ ++#include <linux/ixp_npe.h> ++ ++#define IXNPE_VERSION "IXP4XX NPE driver Version 0.3.0" ++ ++#define DL_MAGIC 0xfeedf00d ++#define DL_MAGIC_SWAP 0x0df0edfe ++ ++#define EOF_BLOCK 0xf ++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ ++ sizeof(struct dl_image)) ++ ++#define BT_INSTR 0 ++#define BT_DATA 1 ++ ++enum blk_type { ++ instruction, ++ data, ++}; ++ ++struct dl_block { ++ u32 type; ++ u32 offset; ++}; ++ ++struct dl_image { ++ u32 magic; ++ u32 id; ++ u32 size; ++ union { ++ u32 data[0]; ++ struct dl_block block[0]; ++ } u; ++}; ++ ++struct dl_codeblock { ++ u32 npe_addr; ++ u32 size; ++ u32 data[0]; ++}; ++ ++static struct platform_driver ixp4xx_npe_driver; ++ ++static int match_by_npeid(struct device *dev, void *id) ++{ ++ struct npe_info *npe = dev_get_drvdata(dev); ++ if (!npe->plat) ++ return 0; ++ return (npe->plat->id == *(int*)id); ++} ++ ++struct device *get_npe_by_id(int id) ++{ ++ struct device *dev = driver_find_device(&ixp4xx_npe_driver.driver, ++ NULL, &id, match_by_npeid); ++ if (dev) { ++ struct npe_info *npe = dev_get_drvdata(dev); ++ if (!try_module_get(THIS_MODULE)) { ++ put_device(dev); ++ return NULL; ++ } ++ npe->usage++; ++ } ++ return dev; ++} ++ ++void return_npe_dev(struct device *dev) ++{ ++ struct npe_info *npe = dev_get_drvdata(dev); ++ put_device(dev); ++ module_put(THIS_MODULE); ++ npe->usage--; ++} ++ ++static int ++download_block(struct npe_info *npe, struct dl_codeblock *cb, unsigned type) ++{ ++ int i; ++ int cmd; ++ ++ switch (type) { ++ case BT_DATA: ++ cmd = IX_NPEDL_EXCTL_CMD_WR_DATA_MEM; ++ if (cb->npe_addr + cb->size > npe->plat->data_size) { ++ printk(KERN_INFO "Data size too large: %d+%d > %d\n", ++ cb->npe_addr, cb->size, npe->plat->data_size); ++ return -EIO; ++ } ++ break; ++ case BT_INSTR: ++ cmd = IX_NPEDL_EXCTL_CMD_WR_INS_MEM; ++ if (cb->npe_addr + cb->size > npe->plat->inst_size) { ++ printk(KERN_INFO "Instr size too large: %d+%d > %d\n", ++ cb->npe_addr, cb->size, npe->plat->inst_size); ++ return -EIO; ++ } ++ break; ++ default: ++ printk(KERN_INFO "Unknown CMD: %d\n", type); ++ return -EIO; ++ } ++ ++ for (i=0; i < cb->size; i++) { ++ npe_write_cmd(npe, cb->npe_addr + i, cb->data[i], cmd); ++ } ++ ++ return 0; ++} ++ ++static int store_npe_image(struct dl_image *image, struct device *dev) ++{ ++ struct dl_block *blk; ++ struct dl_codeblock *cb; ++ struct npe_info *npe; ++ int ret=0; ++ ++ if (!dev) { ++ dev = get_npe_by_id( (image->id >> 24) & 0xf); ++ return_npe_dev(dev); ++ } ++ if (!dev) ++ return -ENODEV; ++ ++ npe = dev_get_drvdata(dev); ++ if (npe->loaded && (npe->usage > 0)) { ++ printk(KERN_INFO "Cowardly refusing to reload an Image " ++ "into the used and running %s\n", npe->plat->name); ++ return 0; /* indicate success anyway... */ ++ } ++ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xf)) { ++ printk(KERN_INFO "IXP46x NPE image ignored on IXP42x\n"); ++ return -EIO; ++ } ++ ++ npe_stop(npe); ++ npe_reset(npe); ++ ++ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) { ++ if (blk->offset > image->size) { ++ printk(KERN_INFO "Block offset out of range\n"); ++ return -EIO; ++ } ++ cb = (struct dl_codeblock*)&image->u.data[blk->offset]; ++ if (blk->offset + cb->size + 2 > image->size) { ++ printk(KERN_INFO "Codeblock size out of range\n"); ++ return -EIO; ++ } ++ if ((ret = download_block(npe, cb, blk->type))) ++ return ret; ++ } ++ *(u32*)npe->img_info = cpu_to_be32(image->id); ++ npe_start(npe); ++ ++ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n", ++ npe->plat->name, npe->img_info[1], npe->img_info[2], ++ npe->img_info[3], npe_status(npe)); ++ if (npe_mh_status(npe)) { ++ printk(KERN_ERR "%s not responding\n", npe->plat->name); ++ } ++ npe->loaded = 1; ++ return 0; ++} ++ ++static int ucode_open(struct inode *inode, struct file *file) ++{ ++ file->private_data = kmalloc(sizeof(struct dl_image), GFP_KERNEL); ++ if (!file->private_data) ++ return -ENOMEM; ++ return 0; ++} ++ ++static int ucode_close(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ return 0; ++} ++ ++static ssize_t ucode_write(struct file *file, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ union { ++ char *data; ++ struct dl_image *image; ++ } u; ++ const char __user *cbuf = buf; ++ ++ u.data = file->private_data; ++ ++ while (count) { ++ int len; ++ if (*ppos < sizeof(struct dl_image)) { ++ len = sizeof(struct dl_image) - *ppos; ++ len = len > count ? count : len; ++ if (copy_from_user(u.data + *ppos, cbuf, len)) ++ return -EFAULT; ++ count -= len; ++ *ppos += len; ++ cbuf += len; ++ continue; ++ } else if (*ppos == sizeof(struct dl_image)) { ++ void *data; ++ if (u.image->magic == DL_MAGIC_SWAP) { ++ printk(KERN_INFO "swapped image found\n"); ++ u.image->id = swab32(u.image->id); ++ u.image->size = swab32(u.image->size); ++ } else if (u.image->magic != DL_MAGIC) { ++ printk(KERN_INFO "Bad magic:%x\n", ++ u.image->magic); ++ return -EFAULT; ++ } ++ len = IMG_SIZE(u.image); ++ data = kmalloc(len, GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ memcpy(data, u.data, *ppos); ++ kfree(u.data); ++ u.data = (char*)data; ++ file->private_data = data; ++ } ++ len = IMG_SIZE(u.image) - *ppos; ++ len = len > count ? count : len; ++ if (copy_from_user(u.data + *ppos, cbuf, len)) ++ return -EFAULT; ++ count -= len; ++ *ppos += len; ++ cbuf += len; ++ if (*ppos == IMG_SIZE(u.image)) { ++ int ret, i; ++ *ppos = 0; ++ if (u.image->magic == DL_MAGIC_SWAP) { ++ for (i=0; i<u.image->size; i++) { ++ u.image->u.data[i] = ++ swab32(u.image->u.data[i]); ++ } ++ u.image->magic = swab32(u.image->magic); ++ } ++ ret = store_npe_image(u.image, NULL); ++ if (ret) { ++ printk(KERN_INFO "Error in NPE image: %x\n", ++ u.image->id); ++ return ret; ++ } ++ } ++ } ++ return (cbuf-buf); ++} ++ ++static void npe_firmware_probe(struct device *dev) ++{ ++#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ ++ && defined(MODULE) ++ const struct firmware *fw_entry; ++ struct npe_info *npe = dev_get_drvdata(dev); ++ struct dl_image *image; ++ int ret = -1, i; ++ ++ if (request_firmware(&fw_entry, npe->plat->name, dev) != 0) { ++ return; ++ } ++ image = (struct dl_image*)fw_entry->data; ++ /* Sanity checks */ ++ if (fw_entry->size < sizeof(struct dl_image)) { ++ printk(KERN_ERR "Firmware error: too small\n"); ++ goto out; ++ } ++ if (image->magic == DL_MAGIC_SWAP) { ++ printk(KERN_INFO "swapped image found\n"); ++ image->id = swab32(image->id); ++ image->size = swab32(image->size); ++ } else if (image->magic != DL_MAGIC) { ++ printk(KERN_ERR "Bad magic:%x\n", image->magic); ++ goto out; ++ } ++ if (IMG_SIZE(image) != fw_entry->size) { ++ printk(KERN_ERR "Firmware error: bad size\n"); ++ goto out; ++ } ++ if (((image->id >> 24) & 0xf) != npe->plat->id) { ++ printk(KERN_ERR "NPE id missmatch\n"); ++ goto out; ++ } ++ if (image->magic == DL_MAGIC_SWAP) { ++ for (i=0; i<image->size; i++) { ++ image->u.data[i] = swab32(image->u.data[i]); ++ } ++ image->magic = swab32(image->magic); ++ } ++ ++ ret = store_npe_image(image, dev); ++out: ++ if (ret) { ++ printk(KERN_ERR "Error downloading Firmware for %s\n", ++ npe->plat->name); ++ } ++ release_firmware(fw_entry); ++#endif ++} ++ ++static void disable_npe_irq(struct npe_info *npe) ++{ ++ u32 reg; ++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL); ++ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE); ++ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE; ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, reg); ++} ++ ++static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct npe_info *npe = dev_get_drvdata(dev); ++ ++ strcpy(buf, npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN ? ++ "start\n" : "stop\n"); ++ return strlen(buf); ++} ++ ++static ssize_t set_npe_state(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct npe_info *npe = dev_get_drvdata(dev); ++ ++ if (npe->usage) { ++ printk("%s in use: read-only\n", npe->plat->name); ++ return count; ++ } ++ if (!strncmp(buf, "start", 5)) { ++ npe_start(npe); ++ } ++ if (!strncmp(buf, "stop", 4)) { ++ npe_stop(npe); ++ } ++ if (!strncmp(buf, "reset", 5)) { ++ npe_stop(npe); ++ npe_reset(npe); ++ } ++ return count; ++} ++ ++static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_npe_state, set_npe_state); ++ ++static int npe_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct npe_info *npe; ++ struct npe_plat_data *plat = pdev->dev.platform_data; ++ int err, size, ret=0; ++ ++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) ++ return -EIO; ++ ++ if (!(npe = kzalloc(sizeof(struct npe_info), GFP_KERNEL))) ++ return -ENOMEM; ++ ++ size = res->end - res->start +1; ++ npe->res = request_mem_region(res->start, size, plat->name); ++ if (!npe->res) { ++ ret = -EBUSY; ++ printk(KERN_ERR "Failed to get memregion(%x, %x)\n", ++ res->start, size); ++ goto out_free; ++ } ++ ++ npe->addr = ioremap(res->start, size); ++ if (!npe->addr) { ++ ret = -ENOMEM; ++ printk(KERN_ERR "Failed to ioremap(%x, %x)\n", ++ res->start, size); ++ goto out_rel; ++ } ++ ++ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; ++ ++ platform_set_drvdata(pdev, npe); ++ ++ err = device_create_file(&pdev->dev, &dev_attr_state); ++ if (err) ++ goto out_rel; ++ ++ npe->plat = plat; ++ disable_npe_irq(npe); ++ npe->usage = 0; ++ npe_reset(npe); ++ npe_firmware_probe(&pdev->dev); ++ ++ return 0; ++ ++out_rel: ++ release_resource(npe->res); ++out_free: ++ kfree(npe); ++ return ret; ++} ++ ++static struct file_operations ucode_dl_fops = { ++ .owner = THIS_MODULE, ++ .write = ucode_write, ++ .open = ucode_open, ++ .release = ucode_close, ++}; ++ ++static struct miscdevice ucode_dl_dev = { ++ .minor = MICROCODE_MINOR, ++ .name = "ixp4xx_ucode", ++ .fops = &ucode_dl_fops, ++}; ++ ++static int npe_remove(struct platform_device *pdev) ++{ ++ struct npe_info *npe = platform_get_drvdata(pdev); ++ ++ device_remove_file(&pdev->dev, &dev_attr_state); ++ ++ iounmap(npe->addr); ++ release_resource(npe->res); ++ kfree(npe); ++ return 0; ++} ++ ++static struct platform_driver ixp4xx_npe_driver = { ++ .driver = { ++ .name = "ixp4xx_npe", ++ .owner = THIS_MODULE, ++ }, ++ .probe = npe_probe, ++ .remove = npe_remove, ++}; ++ ++static int __init init_npedriver(void) ++{ ++ int ret; ++ if ((ret = misc_register(&ucode_dl_dev))){ ++ printk(KERN_ERR "Failed to register misc device %d\n", ++ MICROCODE_MINOR); ++ return ret; ++ } ++ if ((ret = platform_driver_register(&ixp4xx_npe_driver))) ++ misc_deregister(&ucode_dl_dev); ++ else ++ printk(KERN_INFO IXNPE_VERSION " initialized\n"); ++ ++ return ret; ++ ++} ++ ++static void __exit finish_npedriver(void) ++{ ++ misc_deregister(&ucode_dl_dev); ++ platform_driver_unregister(&ixp4xx_npe_driver); ++} ++ ++module_init(init_npedriver); ++module_exit(finish_npedriver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); ++ ++EXPORT_SYMBOL(get_npe_by_id); ++EXPORT_SYMBOL(return_npe_dev); +Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +=================================================================== +--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:35.000000000 -0800 +@@ -22,6 +22,8 @@ + #ifndef _ASM_ARM_IXP4XX_H_ + #define _ASM_ARM_IXP4XX_H_ + ++#include "npe_regs.h" ++ + /* + * IXP4xx Linux Memory Map: + * +@@ -44,6 +46,12 @@ + */ + + /* ++ * PCI Memory Space ++ */ ++#define IXP4XX_PCIMEM_BASE_PHYS (0x48000000) ++#define IXP4XX_PCIMEM_REGION_SIZE (0x04000000) ++#define IXP4XX_PCIMEM_BAR_SIZE (0x01000000) ++/* + * Queue Manager + */ + #define IXP4XX_QMGR_BASE_PHYS (0x60000000) +@@ -322,7 +330,13 @@ + #define PCI_ATPDMA0_LENADDR_OFFSET 0x48 + #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C + #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 +-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 ++#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 ++#define PCI_PTADMA0_AHBADDR_OFFSET 0x58 ++#define PCI_PTADMA0_PCIADDR_OFFSET 0x5c ++#define PCI_PTADMA0_LENADDR_OFFSET 0x60 ++#define PCI_PTADMA1_AHBADDR_OFFSET 0x64 ++#define PCI_PTADMA1_PCIADDR_OFFSET 0x68 ++#define PCI_PTADMA1_LENADDR_OFFSET 0x6c + + /* + * PCI Control/Status Registers +@@ -351,6 +365,12 @@ + #define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) + #define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) + #define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) ++#define PCI_PTADMA0_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA0_AHBADDR_OFFSET) ++#define PCI_PTADMA0_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA0_PCIADDR_OFFSET) ++#define PCI_PTADMA0_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA0_LENADDR_OFFSET) ++#define PCI_PTADMA1_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA1_AHBADDR_OFFSET) ++#define PCI_PTADMA1_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA1_PCIADDR_OFFSET) ++#define PCI_PTADMA1_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA1_LENADDR_OFFSET) + + /* + * PCI register values and bit definitions +@@ -607,6 +627,34 @@ + + #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + ++ ++/* Fuse Bits of IXP_EXP_CFG2 */ ++#define IX_FUSE_RCOMP (1 << 0) ++#define IX_FUSE_USB (1 << 1) ++#define IX_FUSE_HASH (1 << 2) ++#define IX_FUSE_AES (1 << 3) ++#define IX_FUSE_DES (1 << 4) ++#define IX_FUSE_HDLC (1 << 5) ++#define IX_FUSE_AAL (1 << 6) ++#define IX_FUSE_HSS (1 << 7) ++#define IX_FUSE_UTOPIA (1 << 8) ++#define IX_FUSE_ETH0 (1 << 9) ++#define IX_FUSE_ETH1 (1 << 10) ++#define IX_FUSE_NPEA (1 << 11) ++#define IX_FUSE_NPEB (1 << 12) ++#define IX_FUSE_NPEC (1 << 13) ++#define IX_FUSE_PCI (1 << 14) ++#define IX_FUSE_ECC (1 << 15) ++#define IX_FUSE_UTOPIA_PHY_LIMIT (3 << 16) ++#define IX_FUSE_USB_HOST (1 << 18) ++#define IX_FUSE_NPEA_ETH (1 << 19) ++#define IX_FUSE_NPEB_ETH (1 << 20) ++#define IX_FUSE_RSA (1 << 21) ++#define IX_FUSE_XSCALE_MAX_FREQ (3 << 22) ++ ++#define IX_FUSE_IXP46X_ONLY IX_FUSE_XSCALE_MAX_FREQ | IX_FUSE_RSA | \ ++ IX_FUSE_NPEB_ETH | IX_FUSE_NPEA_ETH | IX_FUSE_USB_HOST | IX_FUSE_ECC ++ + #ifndef __ASSEMBLY__ + static inline int cpu_is_ixp46x(void) + { +@@ -620,6 +668,15 @@ + #endif + return 0; + } ++ ++static inline u32 ix_fuse(void) ++{ ++ unsigned int fuses = ~(*IXP4XX_EXP_CFG2); ++ if (!cpu_is_ixp46x()) ++ fuses &= ~IX_FUSE_IXP46X_ONLY; ++ ++ return fuses; ++} + #endif + + #endif +Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,82 @@ ++#ifndef NPE_REGS_H ++#define NPE_REGS_H ++ ++/* Execution Address */ ++#define IX_NPEDL_REG_OFFSET_EXAD 0x00 ++/* Execution Data */ ++#define IX_NPEDL_REG_OFFSET_EXDATA 0x04 ++/* Execution Control */ ++#define IX_NPEDL_REG_OFFSET_EXCTL 0x08 ++/* Execution Count */ ++#define IX_NPEDL_REG_OFFSET_EXCT 0x0C ++/* Action Point 0 */ ++#define IX_NPEDL_REG_OFFSET_AP0 0x10 ++/* Action Point 1 */ ++#define IX_NPEDL_REG_OFFSET_AP1 0x14 ++/* Action Point 2 */ ++#define IX_NPEDL_REG_OFFSET_AP2 0x18 ++/* Action Point 3 */ ++#define IX_NPEDL_REG_OFFSET_AP3 0x1C ++/* Watchpoint FIFO */ ++#define IX_NPEDL_REG_OFFSET_WFIFO 0x20 ++/* Watch Count */ ++#define IX_NPEDL_REG_OFFSET_WC 0x24 ++/* Profile Count */ ++#define IX_NPEDL_REG_OFFSET_PROFCT 0x28 ++ ++/* Messaging Status */ ++#define IX_NPEDL_REG_OFFSET_STAT 0x2C ++/* Messaging Control */ ++#define IX_NPEDL_REG_OFFSET_CTL 0x30 ++/* Mailbox Status */ ++#define IX_NPEDL_REG_OFFSET_MBST 0x34 ++/* messaging in/out FIFO */ ++#define IX_NPEDL_REG_OFFSET_FIFO 0x38 ++ ++ ++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000 ++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000 ++#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000 ++ ++#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01 ++#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02 ++#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03 ++#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04 ++#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C ++#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10 ++#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11 ++#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12 ++#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13 ++#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14 ++#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15 ++ ++#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000 ++#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000 ++#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000 ++ ++#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000 ++#define IX_NPEDL_MASK_STAT_OFNE 0x00010000 ++#define IX_NPEDL_MASK_STAT_IFNE 0x00080000 ++ ++#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C ++#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04 ++#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08 ++ ++/* NPE control register bit definitions */ ++#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */ ++#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */ ++#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */ ++#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */ ++ ++/* NPE status register bit definitions */ ++#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */ ++#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */ ++#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */ ++#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */ ++#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */ ++#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */ ++#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */ ++#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */ ++ ++#endif ++ +Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h +=================================================================== +--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:18.000000000 -0800 ++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:35.000000000 -0800 +@@ -86,6 +86,25 @@ + unsigned long scl_pin; + }; + ++struct npe_plat_data { ++ const char *name; ++ int data_size; ++ int inst_size; ++ int id; /* Node ID */ ++}; ++ ++struct mac_plat_info { ++ int npe_id; /* Node ID of the NPE for this port */ ++ int port_id; /* Port ID for NPE-B @ ixp465 */ ++ int eth_id; /* Physical ID */ ++ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */ ++ int rxq_id; /* Queue ID of the RX-free q */ ++ int rxdoneq_id; /* where incoming packets are returned */ ++ int txq_id; /* Where to push the outgoing packets */ ++ unsigned char hwaddr[6]; /* Desired hardware address */ ++ ++}; ++ + /* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is +Index: linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,192 @@ ++ ++#ifndef IX_CRYPTO_H ++#define IX_CRYPTO_H ++ ++#define MAX_KEYLEN 64 ++#define NPE_CTX_LEN 80 ++#define AES_BLOCK128 16 ++ ++#define NPE_OP_HASH_GEN_ICV 0x50 ++#define NPE_OP_ENC_GEN_KEY 0xc9 ++ ++ ++#define NPE_OP_HASH_VERIFY 0x01 ++#define NPE_OP_CCM_ENABLE 0x04 ++#define NPE_OP_CRYPT_ENABLE 0x08 ++#define NPE_OP_HASH_ENABLE 0x10 ++#define NPE_OP_NOT_IN_PLACE 0x20 ++#define NPE_OP_HMAC_DISABLE 0x40 ++#define NPE_OP_CRYPT_ENCRYPT 0x80 ++ ++#define MOD_ECB 0x0000 ++#define MOD_CTR 0x1000 ++#define MOD_CBC_ENC 0x2000 ++#define MOD_CBC_DEC 0x3000 ++#define MOD_CCM_ENC 0x4000 ++#define MOD_CCM_DEC 0x5000 ++ ++#define ALGO_AES 0x0800 ++#define CIPH_DECR 0x0000 ++#define CIPH_ENCR 0x0400 ++ ++#define MOD_DES 0x0000 ++#define MOD_TDEA2 0x0100 ++#define MOD_TDEA3 0x0200 ++#define MOD_AES128 0x0000 ++#define MOD_AES192 0x0100 ++#define MOD_AES256 0x0200 ++ ++#define KEYLEN_128 4 ++#define KEYLEN_192 6 ++#define KEYLEN_256 8 ++ ++#define CIPHER_TYPE_NULL 0 ++#define CIPHER_TYPE_DES 1 ++#define CIPHER_TYPE_3DES 2 ++#define CIPHER_TYPE_AES 3 ++ ++#define CIPHER_MODE_ECB 1 ++#define CIPHER_MODE_CTR 2 ++#define CIPHER_MODE_CBC 3 ++#define CIPHER_MODE_CCM 4 ++ ++#define HASH_TYPE_NULL 0 ++#define HASH_TYPE_MD5 1 ++#define HASH_TYPE_SHA1 2 ++#define HASH_TYPE_CBCMAC 3 ++ ++#define OP_REG_DONE 1 ++#define OP_REGISTER 2 ++#define OP_PERFORM 3 ++ ++#define STATE_UNREGISTERED 0 ++#define STATE_REGISTERED 1 ++#define STATE_UNLOADING 2 ++ ++struct crypt_ctl { ++#ifndef CONFIG_NPE_ADDRESS_COHERENT ++ u8 mode; /* NPE operation */ ++ u8 init_len; ++ u16 reserved; ++#else ++ u16 reserved; ++ u8 init_len; ++ u8 mode; /* NPE operation */ ++#endif ++ u8 iv[16]; /* IV for CBC mode or CTR IV for CTR mode */ ++ union { ++ u32 icv; ++ u32 rev_aes; ++ } addr; ++ u32 src_buf; ++ u32 dest_buf; ++#ifndef CONFIG_NPE_ADDRESS_COHERENT ++ u16 auth_offs; /* Authentication start offset */ ++ u16 auth_len; /* Authentication data length */ ++ u16 crypt_offs; /* Cryption start offset */ ++ u16 crypt_len; /* Cryption data length */ ++#else ++ u16 auth_len; /* Authentication data length */ ++ u16 auth_offs; /* Authentication start offset */ ++ u16 crypt_len; /* Cryption data length */ ++ u16 crypt_offs; /* Cryption start offset */ ++#endif ++ u32 aadAddr; /* Additional Auth Data Addr for CCM mode */ ++ u32 crypto_ctx; /* NPE Crypto Param structure address */ ++ ++ /* Used by Host */ ++ struct ix_sa_ctx *sa_ctx; ++ int oper_type; ++}; ++ ++struct npe_crypt_cont { ++ union { ++ struct crypt_ctl crypt; ++ u8 rev_aes_key[NPE_CTX_LEN]; ++ } ctl; ++ struct npe_crypt_cont *next; ++ struct npe_crypt_cont *virt; ++ dma_addr_t phys; ++}; ++ ++struct ix_hash_algo { ++ char *name; ++ u32 cfgword; ++ int digest_len; ++ int aad_len; ++ unsigned char *icv; ++ int type; ++}; ++ ++struct ix_cipher_algo { ++ char *name; ++ u32 cfgword_enc; ++ u32 cfgword_dec; ++ int block_len; ++ int iv_len; ++ int type; ++ int mode; ++}; ++ ++struct ix_key { ++ u8 key[MAX_KEYLEN]; ++ int len; ++}; ++ ++struct ix_sa_master { ++ struct device *npe_dev; ++ struct qm_queue *sendq; ++ struct qm_queue *recvq; ++ struct dma_pool *dmapool; ++ struct npe_crypt_cont *pool; ++ int pool_size; ++ rwlock_t lock; ++}; ++ ++struct ix_sa_dir { ++ unsigned char *npe_ctx; ++ dma_addr_t npe_ctx_phys; ++ int npe_ctx_idx; ++ u8 npe_mode; ++}; ++ ++struct ix_sa_ctx { ++ struct list_head list; ++ struct ix_sa_master *master; ++ ++ const struct ix_hash_algo *h_algo; ++ const struct ix_cipher_algo *c_algo; ++ struct ix_key c_key; ++ struct ix_key h_key; ++ ++ int digest_len; ++ ++ struct ix_sa_dir encrypt; ++ struct ix_sa_dir decrypt; ++ ++ struct npe_crypt_cont *rev_aes; ++ gfp_t gfp_flags; ++ ++ int state; ++ void *priv; ++ ++ void(*reg_cb)(struct ix_sa_ctx*, int); ++ void(*perf_cb)(struct ix_sa_ctx*, void*, int); ++ atomic_t use_cnt; ++}; ++ ++const struct ix_hash_algo *ix_hash_by_id(int type); ++const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode); ++ ++struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags); ++void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx); ++ ++int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr, ++ int datalen, int c_offs, int c_len, int a_offs, int a_len, ++ int hmac, char *iv, int encrypt); ++ ++int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx, ++ const struct ix_cipher_algo *cipher, ++ const struct ix_hash_algo *auth, int len); ++ ++#endif +Index: linux-2.6.21-rc1-arm/include/linux/ixp_npe.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/include/linux/ixp_npe.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,117 @@ ++/* ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#ifndef NPE_DEVICE_H ++#define NPE_DEVICE_H ++ ++#include <linux/miscdevice.h> ++#include <asm/hardware.h> ++ ++#ifdef __ARMEB__ ++#undef CONFIG_NPE_ADDRESS_COHERENT ++#else ++#define CONFIG_NPE_ADDRESS_COHERENT ++#endif ++ ++#if defined(__ARMEB__) || defined (CONFIG_NPE_ADDRESS_COHERENT) ++#define npe_to_cpu32(x) (x) ++#define npe_to_cpu16(x) (x) ++#define cpu_to_npe32(x) (x) ++#define cpu_to_npe16(x) (x) ++#else ++#error NPE_DATA_COHERENT ++#define NPE_DATA_COHERENT ++#define npe_to_cpu32(x) be32_to_cpu(x) ++#define npe_to_cpu16(x) be16_to_cpu(x) ++#define cpu_to_npe32(x) cpu_to_be32(x) ++#define cpu_to_npe16(x) cpu_to_be16(x) ++#endif ++ ++ ++struct npe_info { ++ struct resource *res; ++ void __iomem *addr; ++ struct npe_plat_data *plat; ++ u8 img_info[4]; ++ int usage; ++ int loaded; ++ u32 exec_count; ++ u32 ctx_reg2; ++}; ++ ++ ++static inline void npe_reg_write(struct npe_info *npe, u32 reg, u32 val) ++{ ++ *(volatile u32*)((u8*)(npe->addr) + reg) = val; ++} ++ ++static inline u32 npe_reg_read(struct npe_info *npe, u32 reg) ++{ ++ return *(volatile u32*)((u8*)(npe->addr) + reg); ++} ++ ++static inline u32 npe_status(struct npe_info *npe) ++{ ++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCTL); ++} ++ ++/* ixNpeDlNpeMgrCommandIssue */ ++static inline void npe_write_exctl(struct npe_info *npe, u32 cmd) ++{ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); ++} ++/* ixNpeDlNpeMgrWriteCommandIssue */ ++static inline void ++npe_write_cmd(struct npe_info *npe, u32 addr, u32 data, int cmd) ++{ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXDATA, data); ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr); ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); ++} ++/* ixNpeDlNpeMgrReadCommandIssue */ ++static inline u32 ++npe_read_cmd(struct npe_info *npe, u32 addr, int cmd) ++{ ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr); ++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); ++ /* Intel reads the data twice - so do we... */ ++ npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA); ++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA); ++} ++ ++/* ixNpeDlNpeMgrExecAccRegWrite */ ++static inline void npe_write_ecs_reg(struct npe_info *npe, u32 addr, u32 data) ++{ ++ npe_write_cmd(npe, addr, data, IX_NPEDL_EXCTL_CMD_WR_ECS_REG); ++} ++/* ixNpeDlNpeMgrExecAccRegRead */ ++static inline u32 npe_read_ecs_reg(struct npe_info *npe, u32 addr) ++{ ++ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG); ++} ++ ++extern void npe_stop(struct npe_info *npe); ++extern void npe_start(struct npe_info *npe); ++extern void npe_reset(struct npe_info *npe); ++ ++extern struct device *get_npe_by_id(int id); ++extern void return_npe_dev(struct device *dev); ++ ++/* NPE Messages */ ++extern int ++npe_mh_status(struct npe_info *npe); ++extern int ++npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr); ++extern int ++npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp); ++extern int ++npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid); ++extern int ++npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable); ++extern int ++npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset); ++ ++#endif +Index: linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h 2007-02-21 02:24:35.000000000 -0800 +@@ -0,0 +1,202 @@ ++/* ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#ifndef IX_QMGR_H ++#define IX_QMGR_H ++ ++#include <linux/skbuff.h> ++#include <linux/list.h> ++#include <linux/if_ether.h> ++#include <linux/spinlock.h> ++#include <linux/platform_device.h> ++#include <linux/ixp_npe.h> ++#include <asm/atomic.h> ++ ++/* All offsets are in 32bit words */ ++#define QUE_LOW_STAT0 0x100 /* 4x Status of the 32 lower queues 0-31 */ ++#define QUE_UO_STAT0 0x104 /* 2x Underflow/Overflow status bits*/ ++#define QUE_UPP_STAT0 0x106 /* 2x Status of thew 32 upper queues 32-63 */ ++#define INT0_SRC_SELREG0 0x108 /* 4x */ ++#define QUE_IE_REG0 0x10c /* 2x */ ++#define QUE_INT_REG0 0x10e /* 2x IRQ reg, write 1 to reset IRQ */ ++ ++#define IX_QMGR_QCFG_BASE 0x800 ++#define IX_QMGR_QCFG_SIZE 0x40 ++#define IX_QMGR_SRAM_SPACE (IX_QMGR_QCFG_BASE + IX_QMGR_QCFG_SIZE) ++ ++#define MAX_QUEUES 32 /* first, we only support the lower 32 queues */ ++#define MAX_NPES 3 ++ ++enum { ++ Q_IRQ_ID_E = 0, /* Queue Empty due to last read */ ++ Q_IRQ_ID_NE, /* Queue Nearly Empty due to last read */ ++ Q_IRQ_ID_NF, /* Queue Nearly Full due to last write */ ++ Q_IRQ_ID_F, /* Queue Full due to last write */ ++ Q_IRQ_ID_NOT_E, /* Queue Not Empty due to last write */ ++ Q_IRQ_ID_NOT_NE, /* Queue Not Nearly Empty due to last write */ ++ Q_IRQ_ID_NOT_NF, /* Queue Not Nearly Full due to last read */ ++ Q_IRQ_ID_NOT_F /* Queue Not Full due to last read */ ++}; ++ ++extern struct qm_queue *request_queue(int qid, int len); ++extern void release_queue(struct qm_queue *queue); ++extern int queue_set_irq_src(struct qm_queue *queue, int flag); ++extern void queue_set_watermarks(struct qm_queue *, unsigned ne, unsigned nf); ++extern int queue_len(struct qm_queue *queue); ++ ++struct qm_qmgr; ++struct qm_queue; ++ ++typedef void(*queue_cb)(struct qm_queue *); ++ ++struct qm_queue { ++ int addr; /* word offset from IX_QMGR_SRAM_SPACE */ ++ int len; /* size in words */ ++ int id; /* Q Id */ ++ u32 __iomem *acc_reg; ++ struct device *dev; ++ atomic_t use; ++ queue_cb irq_cb; ++ void *cb_data; ++}; ++ ++#ifndef CONFIG_NPE_ADDRESS_COHERENT ++struct eth_ctl { ++ u32 next; ++ u16 buf_len; ++ u16 pkt_len; ++ u32 phys_addr; ++ u8 dest_id; ++ u8 src_id; ++ u16 flags; ++ u8 qos; ++ u8 padlen; ++ u16 vlan_tci; ++ u8 dest_mac[ETH_ALEN]; ++ u8 src_mac[ETH_ALEN]; ++}; ++ ++#else ++struct eth_ctl { ++ u32 next; ++ u16 pkt_len; ++ u16 buf_len; ++ u32 phys_addr; ++ u16 flags; ++ u8 src_id; ++ u8 dest_id; ++ u16 vlan_tci; ++ u8 padlen; ++ u8 qos; ++ u8 dest_mac[ETH_ALEN]; ++ u8 src_mac[ETH_ALEN]; ++}; ++#endif ++ ++struct npe_cont { ++ struct eth_ctl eth; ++ void *data; ++ struct npe_cont *next; ++ struct npe_cont *virt; ++ dma_addr_t phys; ++}; ++ ++struct qm_qmgr { ++ u32 __iomem *addr; ++ struct resource *res; ++ struct qm_queue *queues[MAX_QUEUES]; ++ rwlock_t lock; ++ struct npe_cont *pool; ++ struct dma_pool *dmapool; ++ int irq; ++}; ++ ++static inline void queue_write_cfg_reg(struct qm_queue *queue, u32 val) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id) = val; ++} ++static inline u32 queue_read_cfg_reg(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ return *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); ++} ++ ++static inline void queue_ack_irq(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ *(qmgr->addr + QUE_INT_REG0) = 1 << queue->id; ++} ++ ++static inline void queue_enable_irq(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ *(qmgr->addr + QUE_IE_REG0) |= 1 << queue->id; ++} ++ ++static inline void queue_disable_irq(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ *(qmgr->addr + QUE_IE_REG0) &= ~(1 << queue->id); ++} ++ ++static inline void queue_put_entry(struct qm_queue *queue, u32 entry) ++{ ++ *(queue->acc_reg) = npe_to_cpu32(entry); ++} ++ ++static inline u32 queue_get_entry(struct qm_queue *queue) ++{ ++ return cpu_to_npe32(*queue->acc_reg); ++} ++ ++static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr) ++{ ++ unsigned long flags; ++ struct npe_cont *cont; ++ ++ if (!qmgr->pool) ++ return NULL; ++ write_lock_irqsave(&qmgr->lock, flags); ++ cont = qmgr->pool; ++ qmgr->pool = cont->next; ++ write_unlock_irqrestore(&qmgr->lock, flags); ++ return cont; ++} ++ ++static inline void qmgr_return_cont(struct qm_qmgr *qmgr,struct npe_cont *cont) ++{ ++ unsigned long flags; ++ ++ write_lock_irqsave(&qmgr->lock, flags); ++ cont->next = qmgr->pool; ++ qmgr->pool = cont; ++ write_unlock_irqrestore(&qmgr->lock, flags); ++} ++ ++static inline int queue_stat(struct qm_queue *queue) ++{ ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ u32 reg = *(qmgr->addr + QUE_UO_STAT0 + (queue->id >> 4)); ++ return (reg >> (queue->id & 0xf) << 1) & 3; ++} ++ ++/* Prints the queue state, which is very, very helpfull for debugging */ ++static inline void queue_state(struct qm_queue *queue) ++{ ++ u32 val=0, lstat=0; ++ int offs; ++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); ++ ++ offs = queue->id/8 + QUE_LOW_STAT0; ++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); ++ lstat = (*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x0f; ++ ++ printk("Qid[%02d]: Wptr=%4x, Rptr=%4x, diff=%4x, Stat:%x\n", queue->id, ++ val&0x7f, (val>>7) &0x7f, (val - (val >> 7)) & 0x7f, lstat); ++} ++ ++#endif diff --git a/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch b/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch new file mode 100644 index 0000000..1050702 --- /dev/null +++ b/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch @@ -0,0 +1,17 @@ +--- + drivers/net/ixp4xx/mac_driver.c | 24 ++++++++++-------------- + 1 file changed, 10 insertions(+), 14 deletions(-) + +Index: linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c +=================================================================== +--- linux-2.6.21-rc4-git6-arm.orig/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:32:20.735684085 +0000 ++++ linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:33:29.355972584 +0000 +@@ -842,7 +842,7 @@ + } + } + +-module_init(init_mac); ++late_initcall(init_mac); + module_exit(finish_mac); + + MODULE_LICENSE("GPL"); diff --git a/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch new file mode 100644 index 0000000..ef53155 --- /dev/null +++ b/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch @@ -0,0 +1,392 @@ +--- + drivers/net/ixp4xx/Kconfig | 10 + + drivers/net/ixp4xx/Makefile | 1 + drivers/net/ixp4xx/npe_ucode.c | 185 +++++++++++++++++++++++++++++++++ + drivers/net/ixp4xx/ucode_dl.c | 43 ++++--- + include/asm-arm/arch-ixp4xx/platform.h | 19 +++ + include/linux/ixp_npe.h | 1 + 6 files changed, 239 insertions(+), 20 deletions(-) + +Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig +=================================================================== +--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Kconfig ++++ linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig +@@ -11,6 +11,7 @@ + tristate "IXP4xx NPE support" + depends on ARCH_IXP4XX + depends on NET_ETHERNET ++ select CRC16 + help + The IXP4XX NPE driver supports the 3 CPU co-processors called + "Network Processing Engines" (NPE). It adds support fo downloading +@@ -18,7 +19,7 @@ + More about this at: Documentation/networking/ixp4xx/README. + You can either use this OR the Intel Access Library (IAL) + +-config IXP4XX_FW_LOAD ++config IXP4XX_NPE_FW_LOAD + bool "Use Firmware hotplug for Microcode download" + depends on IXP4XX_NPE + select HOTPLUG +@@ -28,6 +29,13 @@ + /usr/lib/hotplug/firmware/NPE-[ABC] + see Documentation/firmware_class/hotplug-script + ++config IXP4XX_NPE_FW_MTD ++ bool "Load firmware from an mtd partition" ++ depends on IXP4XX_NPE && MTD_IXP4XX ++ help ++ With this option, the driver will search for ++ the firmware into an MTD partition. ++ + config IXP4XX_MAC + tristate "IXP4xx MAC support" + depends on IXP4XX_NPE +Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile +=================================================================== +--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Makefile ++++ linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile +@@ -1,5 +1,6 @@ + obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o + obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o ++obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o + obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o + obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o + +Index: linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c +=================================================================== +--- /dev/null ++++ linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c +@@ -0,0 +1,185 @@ ++/* ++ * Provide an NPE platform device for microcode handling ++ * ++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> ++ * ++ * This file is released under the GPLv2 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/firmware.h> ++#include <linux/mtd/mtd.h> ++ ++#include <linux/ixp_npe.h> ++ ++#define DL_MAGIC 0xfeedf00d ++#define DL_MAGIC_SWAP 0x0df0edfe ++ ++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ ++ sizeof(struct dl_image)) ++ ++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) ++#define IMG_REV_MINOR(id) ((id) & 0x0f) ++#define IMG_FUNC(id) (((id) >> 16) & 0xff) ++#define IMG_NPE(id) (((id) >> 24) & 0x0f) ++#define IMG_IXP(id) (((id) >> 28) & 0x0f) ++ ++static struct platform_driver ixp4xx_npe_ucode_driver; ++static unsigned char *partition_name = NULL; ++ ++static void print_image_info(u32 id, u32 offset, u32 size) ++{ ++ unsigned char idx; ++ const char *names[] = { "IXP425", "IXP465", "unknown" }; ++ ++ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2; ++ ++ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, " ++ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A', ++ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id); ++} ++ ++void npe_swap_image(struct dl_image *image) ++{ ++ unsigned int i; ++ ++ image->magic = swab32(image->magic); ++ image->id = swab32(image->id); ++ image->size = swab32(image->size); ++ ++ for (i = 0; i < image->size; i++) ++ image->u.data[i] = swab32(image->u.data[i]); ++} ++ ++static void npe_find_microcode(struct mtd_info *mtd) ++{ ++ u32 buf; ++ u32 magic = htonl(DL_MAGIC); ++ u32 id, size; ++ size_t retlen; ++ int err; ++ unsigned int offset = 0; ++ ++ printk("npe: searching for firmware...\n"); ++ ++ while (offset < mtd->size) { ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf); ++ offset += retlen; ++ ++ if (buf != magic) ++ continue; ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id); ++ offset += retlen; ++ ++ if (id == magic) ++ break; ++ ++ id = ntohl(id); ++ ++ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size); ++ offset += retlen; ++ ++ size = (ntohl(size) * 4) + 12; ++ ++ print_image_info(id, offset - 12, size); ++ ++ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) || IMG_FUNC(id) == 0x05 ) { // XXX fix size/detection ++ ++ struct dl_image *image = kmalloc(size, GFP_KERNEL); ++ ++ /* we are going to load it, rewind offset */ ++ offset -= 12; ++ ++ if (image) { ++ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image); ++ ++ if (err == 0 && retlen == size) { ++ if (image->magic == DL_MAGIC_SWAP) ++ npe_swap_image(image); ++ ++ store_npe_image(image, NULL); ++ } else { ++ printk(KERN_ERR "unable to read firmware\n"); ++ } ++ ++ kfree(image); ++ } ++ ++ offset += size; ++ } ++ } ++} ++ ++static void npe_flash_add(struct mtd_info *mtd) ++{ ++ if (partition_name == NULL) ++ return; ++ ++ if (strcmp(mtd->name, partition_name) == 0) { ++ npe_find_microcode(mtd); ++ } ++} ++ ++static void npe_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier npe_flash_notifier = { ++ .add = npe_flash_add, ++ .remove = npe_flash_remove, ++}; ++ ++static int npe_ucode_probe(struct platform_device *pdev) ++{ ++ struct npe_ucode_platform_data *data = pdev->dev.platform_data; ++ ++ if (partition_name) ++ return -EEXIST; ++ ++ if (data && data->mtd_partition) { ++ partition_name = data->mtd_partition; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static int npe_ucode_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static struct platform_driver ixp4xx_npe_ucode_driver = { ++ .driver = { ++ .name = "ixp4xx_npe_ucode", ++ .owner = THIS_MODULE, ++ }, ++ .probe = npe_ucode_probe, ++ .remove = npe_ucode_remove, ++}; ++ ++static int __init npe_ucode_init(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(&ixp4xx_npe_ucode_driver); ++ register_mtd_user(&npe_flash_notifier); ++ ++ return ret; ++} ++ ++static void __exit npe_ucode_exit(void) ++{ ++ unregister_mtd_user(&npe_flash_notifier); ++ platform_driver_unregister(&ixp4xx_npe_ucode_driver); ++} ++ ++module_init(npe_ucode_init); ++module_exit(npe_ucode_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +Index: linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c +=================================================================== +--- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/ucode_dl.c ++++ linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c +@@ -16,6 +16,7 @@ + #include <linux/firmware.h> + #include <linux/dma-mapping.h> + #include <linux/byteorder/swab.h> ++#include <linux/crc16.h> + #include <asm/uaccess.h> + #include <asm/io.h> + +@@ -26,6 +27,12 @@ + #define DL_MAGIC 0xfeedf00d + #define DL_MAGIC_SWAP 0x0df0edfe + ++#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) ++#define IMG_REV_MINOR(id) ((id) & 0x0f) ++#define IMG_FUNC(id) (((id) >> 16) & 0xff) ++#define IMG_NPE(id) (((id) >> 24) & 0x0f) ++#define IMG_IXP(id) (((id) >> 28) & 0x0f) ++ + #define EOF_BLOCK 0xf + #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ + sizeof(struct dl_image)) +@@ -38,21 +45,6 @@ + data, + }; + +-struct dl_block { +- u32 type; +- u32 offset; +-}; +- +-struct dl_image { +- u32 magic; +- u32 id; +- u32 size; +- union { +- u32 data[0]; +- struct dl_block block[0]; +- } u; +-}; +- + struct dl_codeblock { + u32 npe_addr; + u32 size; +@@ -127,20 +119,33 @@ + return 0; + } + +-static int store_npe_image(struct dl_image *image, struct device *dev) ++int store_npe_image(struct dl_image *image, struct device *dev) + { + struct dl_block *blk; + struct dl_codeblock *cb; + struct npe_info *npe; + int ret=0; ++ u16 crc; + + if (!dev) { +- dev = get_npe_by_id( (image->id >> 24) & 0xf); ++ dev = get_npe_by_id(IMG_NPE(image->id)); + return_npe_dev(dev); + } + if (!dev) + return -ENODEV; + ++ if (image->size > 24000) { // XXX fix max size ++ printk(KERN_ERR "npe: firmware too large\n"); ++ return -EFBIG; ++ } ++ ++ if (IMG_REV_MAJOR(image->id) != 2) { ++ printk(KERN_ERR "npe: only revision 2 is supported at this time\n"); ++ return -EINVAL; ++ } ++ ++ crc = crc16(0, (u8 *) image, IMG_SIZE(image)); ++ + npe = dev_get_drvdata(dev); + if (npe->loaded && (npe->usage > 0)) { + printk(KERN_INFO "Cowardly refusing to reload an Image " +@@ -267,8 +272,7 @@ + + static void npe_firmware_probe(struct device *dev) + { +-#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ +- && defined(MODULE) ++#ifdef CONFIG_IXP4XX_NPE_FW_LOADER + const struct firmware *fw_entry; + struct npe_info *npe = dev_get_drvdata(dev); + struct dl_image *image; +@@ -477,3 +481,4 @@ + + EXPORT_SYMBOL(get_npe_by_id); + EXPORT_SYMBOL(return_npe_dev); ++EXPORT_SYMBOL(store_npe_image); +Index: linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h +=================================================================== +--- linux-2.6.20-rc3.orig/include/asm-arm/arch-ixp4xx/platform.h ++++ linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h +@@ -86,6 +86,21 @@ + unsigned long scl_pin; + }; + ++struct dl_block { ++ u32 type; ++ u32 offset; ++}; ++ ++struct dl_image { ++ u32 magic; ++ u32 id; ++ u32 size; ++ union { ++ u32 data[0]; ++ struct dl_block block[0]; ++ } u; ++}; ++ + struct npe_plat_data { + const char *name; + int data_size; +@@ -105,6 +120,10 @@ + + }; + ++struct npe_ucode_platform_data { ++ unsigned char *mtd_partition; ++}; ++ + /* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is +Index: linux-2.6.20-rc3/include/linux/ixp_npe.h +=================================================================== +--- linux-2.6.20-rc3.orig/include/linux/ixp_npe.h ++++ linux-2.6.20-rc3/include/linux/ixp_npe.h +@@ -99,6 +99,7 @@ + + extern struct device *get_npe_by_id(int id); + extern void return_npe_dev(struct device *dev); ++extern int store_npe_image(struct dl_image *image, struct device *dev); + + /* NPE Messages */ + extern int diff --git a/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch b/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch new file mode 100644 index 0000000..4bd6875 --- /dev/null +++ b/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch @@ -0,0 +1,73 @@ +diff -Nur linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c +--- linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:26:54.000000000 +0200 ++++ linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:33:44.000000000 +0200 +@@ -161,6 +161,16 @@ + { + struct mac_info *mac = netdev_priv(dev); + ++ if ( mac->mii.phy_id < 0 ) { ++ if ( init ) { ++ netif_carrier_on(mac->mii.dev); ++ mac->mii.full_duplex = 1; ++ update_duplex_mode(dev); ++ return 1; ++ } ++ return 0; ++ } ++ + if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) { + update_duplex_mode(dev); + return 1; +@@ -458,7 +468,12 @@ + return -EINVAL; + if (!try_module_get(THIS_MODULE)) + return -ENODEV; +- rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); ++ if ( mac->mii.phy_id < 0 ) { ++ duplex_changed = 0; ++ rc = -EOPNOTSUPP; ++ } else { ++ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); ++ } + module_put(THIS_MODULE); + if (duplex_changed) + update_duplex_mode(dev); +@@ -488,6 +503,9 @@ + static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) + { + struct mac_info *mac = netdev_priv(dev); ++ if ( mac->mii.phy_id < 0 ) { ++ return 0; ++ } + mii_ethtool_gset(&mac->mii, cmd); + return 0; + } +@@ -496,6 +514,9 @@ + { + struct mac_info *mac = netdev_priv(dev); + int rc; ++ if ( mac->mii.phy_id < 0 ) { ++ return -EOPNOTSUPP; ++ } + rc = mii_ethtool_sset(&mac->mii, cmd); + return rc; + } +@@ -503,12 +524,18 @@ + static int ixmac_nway_reset(struct net_device *dev) + { + struct mac_info *mac = netdev_priv(dev); ++ if ( mac->mii.phy_id < 0 ) { ++ return -EOPNOTSUPP; ++ } + return mii_nway_restart(&mac->mii); + } + + static u32 ixmac_get_link(struct net_device *dev) + { + struct mac_info *mac = netdev_priv(dev); ++ if ( mac->mii.phy_id < 0 ) { ++ return 1; ++ } + return mii_link_ok(&mac->mii); + } + diff --git a/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch b/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch new file mode 100644 index 0000000..cada1bd --- /dev/null +++ b/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch @@ -0,0 +1,42 @@ +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +@@ -137,6 +137,29 @@ static struct platform_device nslu2_uart + .resource = nslu2_uart_resources, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 1, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ + static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, +@@ -144,6 +166,7 @@ static struct platform_device *nslu2_dev + #ifdef CONFIG_LEDS_IXP4XX + &nslu2_leds, + #endif ++ &mac0 + }; + + static void nslu2_power_off(void) diff --git a/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch b/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch new file mode 100644 index 0000000..9256324 --- /dev/null +++ b/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch @@ -0,0 +1,41 @@ +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +@@ -123,12 +123,36 @@ static struct platform_device nas100d_ua + .resource = nas100d_uart_resources, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 0, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ + static struct platform_device *nas100d_devices[] __initdata = { + &nas100d_i2c_controller, + &nas100d_flash, + #ifdef CONFIG_LEDS_IXP4XX + &nas100d_leds, + #endif ++ &mac0 + }; + + static void nas100d_power_off(void) diff --git a/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch b/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch new file mode 100644 index 0000000..adf9189 --- /dev/null +++ b/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch @@ -0,0 +1,35 @@ +--- + arch/arm/mach-ixp4xx/nslu2-setup.c | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +@@ -159,6 +159,16 @@ static struct platform_device mac0 = { + .resource = &res_mac0, + }; + ++struct npe_ucode_platform_data nslu2_npe_ucode_data = { ++ .mtd_partition = "FIS directory", ++}; ++ ++static struct platform_device nslu2_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &nslu2_npe_ucode_data, ++}; ++ + static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, +@@ -166,7 +176,8 @@ static struct platform_device *nslu2_dev + #ifdef CONFIG_LEDS_IXP4XX + &nslu2_leds, + #endif +- &mac0 ++ &mac0, ++ &nslu2_npe_ucode, + }; + + static void nslu2_power_off(void) diff --git a/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch b/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch new file mode 100644 index 0000000..0794e6f --- /dev/null +++ b/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch @@ -0,0 +1,34 @@ +--- + arch/arm/mach-ixp4xx/nas100d-setup.c | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +@@ -145,13 +145,24 @@ static struct platform_device mac0 = { + .resource = &res_mac0, + }; + ++struct npe_ucode_platform_data nas100d_npe_ucode_data = { ++ .mtd_partition = "microcode", ++}; ++ ++static struct platform_device nas100d_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &nas100d_npe_ucode_data, ++}; ++ + static struct platform_device *nas100d_devices[] __initdata = { + &nas100d_i2c_controller, + &nas100d_flash, + #ifdef CONFIG_LEDS_IXP4XX + &nas100d_leds, + #endif +- &mac0 ++ &mac0, ++ &nas100d_npe_ucode, + }; + + static void nas100d_power_off(void) diff --git a/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch b/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch new file mode 100644 index 0000000..3736886 --- /dev/null +++ b/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch @@ -0,0 +1,56 @@ +--- + arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +@@ -16,6 +16,7 @@ + #include <linux/serial.h> + #include <linux/serial_8250.h> + #include <linux/leds.h> ++#include <linux/mtd/mtd.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d + &nas100d_npe_ucode, + }; + ++static void nas100d_flash_add(struct mtd_info *mtd) ++{ ++ if (strcmp(mtd->name, "RedBoot config") == 0) { ++ size_t retlen; ++ u_char mac[6]; ++ ++ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) { ++ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ memcpy(plat_mac0.hwaddr, mac, 6); ++ } else { ++ printk(KERN_ERR "nas100d mac: read failed\n"); ++ } ++ } ++} ++ ++static void nas100d_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier nas100d_flash_notifier = { ++ .add = nas100d_flash_add, ++ .remove = nas100d_flash_remove, ++}; ++ + static void nas100d_power_off(void) + { + /* This causes the box to drop the power and go dead. */ +@@ -196,6 +221,8 @@ static void __init nas100d_init(void) + (void)platform_device_register(&nas100d_uart); + + platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); ++ ++ register_mtd_user(&nas100d_flash_notifier); + } + + MACHINE_START(NAS100D, "Iomega NAS 100d") diff --git a/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch b/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch new file mode 100644 index 0000000..21fe29a --- /dev/null +++ b/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch @@ -0,0 +1,56 @@ +--- + arch/arm/mach-ixp4xx/nslu2-setup.c | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +@@ -18,6 +18,7 @@ + #include <linux/serial.h> + #include <linux/serial_8250.h> + #include <linux/leds.h> ++#include <linux/mtd/mtd.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -180,6 +181,30 @@ static struct platform_device *nslu2_dev + &nslu2_npe_ucode, + }; + ++static void nslu2_flash_add(struct mtd_info *mtd) ++{ ++ if (strcmp(mtd->name, "RedBoot") == 0) { ++ size_t retlen; ++ u_char mac[6]; ++ ++ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) { ++ printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ memcpy(plat_mac0.hwaddr, mac, 6); ++ } else { ++ printk(KERN_ERR "nslu2 mac: read failed\n"); ++ } ++ } ++} ++ ++static void nslu2_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier nslu2_flash_notifier = { ++ .add = nslu2_flash_add, ++ .remove = nslu2_flash_remove, ++}; ++ + static void nslu2_power_off(void) + { + /* This causes the box to drop the power and go dead. */ +@@ -210,6 +235,8 @@ static void __init nslu2_init(void) + (void)platform_device_register(&nslu2_uart); + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++ ++ register_mtd_user(&nslu2_flash_notifier); + } + + MACHINE_START(NSLU2, "Linksys NSLU2") diff --git a/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch b/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch new file mode 100644 index 0000000..b7ac4d9 --- /dev/null +++ b/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch @@ -0,0 +1,49 @@ +From: Alan Cox <alan@redhat.com> +To: Alessandro Zummo <alessandro.zummo@towertech.it> +Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com> +Subject: Re: drivers/ata/pata_artop.c +Date: Sun, 15 Oct 2006 14:25:16 -0400 +User-Agent: Mutt/1.4.1i + +On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote: +> In the discovery phase there's a lot of time spent in the detection +> of the second port. + +The error recovery is a bit determined right now - Tejun's been doing some +work on SRST behaviour and also for the worst cases polled detect so it +should come out ok + +> What's the correct way to inform the driver +> to avoid checking the second port? + +Set the number of ports to 1 in your own tree for now. The real fix is +not to go poking at pata ports if the ret is 0xFF + +--- + drivers/ata/pata_artop.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +Index: linux-2.6.19/drivers/ata/pata_artop.c +=================================================================== +--- linux-2.6.19.orig/drivers/ata/pata_artop.c ++++ linux-2.6.19/drivers/ata/pata_artop.c +@@ -26,6 +26,7 @@ + #include <scsi/scsi_host.h> + #include <linux/libata.h> + #include <linux/ata.h> ++#include <asm/mach-types.h> + + #define DRV_NAME "pata_artop" + #define DRV_VERSION "0.4.2" +@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de + pci_read_config_byte(pdev, 0x4a, ®); + pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); + ++ /* NAS100D workaround */ ++#ifdef CONFIG_MACH_NAS100D ++ if (machine_is_nas100d()) ++ ports = 1; ++#endif + } + + BUG_ON(info == NULL); diff --git a/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch b/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch new file mode 100644 index 0000000..bfff465 --- /dev/null +++ b/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch @@ -0,0 +1,927 @@ +Index: linux-2.6.20-rc3/drivers/net/via-velocity.c +=================================================================== +--- linux-2.6.20-rc3.orig/drivers/net/via-velocity.c 2007-01-02 10:30:25.892465963 +0000 ++++ linux-2.6.20-rc3/drivers/net/via-velocity.c 2007-01-02 10:30:36.261113964 +0000 +@@ -96,11 +96,31 @@ + MODULE_LICENSE("GPL"); + MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"); + ++/* Valid values for vdebug (additive, this is a bitmask): ++ * 0x00 => off ++ * 0x01 => always on ++ * 0x02 => additional detail on tx (rx, too, if anyone implements same) ++ * 0x04 => detail the initialization process ++ * 0x08 => spot debug detail; to be used as developers see fit ++ */ ++static int vdebug = 0; ++ ++/* HAIL - these macros are for the normal 0x01-type tracing... */ ++#define HAIL(S) \ ++ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S)); ++#define HAILS(S,T) \ ++ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T)); ++ + #define VELOCITY_PARAM(N,D) \ + static int N[MAX_UNITS]=OPTION_DEFAULT;\ + module_param_array(N, int, NULL, 0); \ + MODULE_PARM_DESC(N, D); + ++#define VELO_DEBUG_MIN 0 ++#define VELO_DEBUG_MAX 255 ++#define VELO_DEBUG_DEF 0 ++VELOCITY_PARAM(velo_debug, "Debug level"); ++ + #define RX_DESC_MIN 64 + #define RX_DESC_MAX 255 + #define RX_DESC_DEF 64 +@@ -385,12 +405,12 @@ + if (val == -1) + *opt = def; + else if (val < min || val > max) { +- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n", +- devname, name, min, max); ++ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n", ++ name, min, max); + *opt = def; + } else { +- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n", +- devname, name, val); ++ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n", ++ name, val); + *opt = val; + } + } +@@ -415,12 +435,12 @@ + if (val == -1) + *opt |= (def ? flag : 0); + else if (val < 0 || val > 1) { +- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", +- devname, name); ++ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n", ++ name); + *opt |= (def ? flag : 0); + } else { +- printk(KERN_INFO "%s: set parameter %s to %s\n", +- devname, name, val ? "TRUE" : "FALSE"); ++ printk(KERN_INFO "via-velocity: set parameter %s to %s\n", ++ name, val ? "TRUE" : "FALSE"); + *opt |= (val ? flag : 0); + } + } +@@ -438,6 +458,7 @@ + static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname) + { + ++ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname); + velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); + velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname); + velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname); +@@ -452,6 +473,7 @@ + velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname); + velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname); + opts->numrx = (opts->numrx & ~3); ++ vdebug = opts->velo_debug; + } + + /** +@@ -466,6 +488,8 @@ + { + struct mac_regs __iomem * regs = vptr->mac_regs; + ++ HAIL("velocity_init_cam_filter"); ++ + /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */ + WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG); + WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG); +@@ -484,14 +508,12 @@ + WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); + + mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM); +- vptr->vCAMmask[0] |= 1; +- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); + } else { + u16 temp = 0; + mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); +- temp = 1; +- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); + } ++ vptr->vCAMmask[0] |= 1; ++ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); + } + + /** +@@ -508,13 +530,15 @@ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i; + ++ HAIL("velocity_rx_reset"); + vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0; + + /* + * Init state, all RD entries belong to the NIC + */ + for (i = 0; i < vptr->options.numrx; ++i) +- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; ++ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */ ++ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ + + writew(vptr->options.numrx, ®s->RBRDU); + writel(vptr->rd_pool_dma, ®s->RDBaseLo); +@@ -537,12 +561,15 @@ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i, mii_status; + ++ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n"); ++ + mac_wol_reset(regs); + + switch (type) { + case VELOCITY_INIT_RESET: + case VELOCITY_INIT_WOL: + ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n"); + netif_stop_queue(vptr->dev); + + /* +@@ -570,12 +597,13 @@ + + case VELOCITY_INIT_COLD: + default: ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n"); + /* + * Do reset + */ + velocity_soft_reset(vptr); ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n"); + mdelay(5); +- + mac_eeprom_reload(regs); + for (i = 0; i < 6; i++) { + writeb(vptr->dev->dev_addr[i], &(regs->PAR[i])); +@@ -593,11 +621,16 @@ + */ + BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB); + ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n"); + /* + * Init CAM filter + */ ++ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n"); ++ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */ + velocity_init_cam_filter(vptr); ++ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n"); + ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n"); + /* + * Set packet filter: Receive directed and broadcast address + */ +@@ -607,10 +640,12 @@ + * Enable MII auto-polling + */ + enable_mii_autopoll(regs); ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n"); + + vptr->int_mask = INT_MASK_DEF; + +- writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo); ++ /* writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo); BE */ ++ writel((vptr->rd_pool_dma), ®s->RDBaseLo); /* BE */ + writew(vptr->options.numrx - 1, ®s->RDCSize); + mac_rx_queue_run(regs); + mac_rx_queue_wake(regs); +@@ -618,10 +653,13 @@ + writew(vptr->options.numtx - 1, ®s->TDCSize); + + for (i = 0; i < vptr->num_txq; i++) { +- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); ++ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */ ++ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */ + mac_tx_queue_run(regs, i); + } + ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n"); ++ + init_flow_control_register(vptr); + + writel(CR0_STOP, ®s->CR0Clr); +@@ -640,8 +678,10 @@ + + enable_flow_control_ability(vptr); + mac_hw_mibs_init(regs); ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n"); + mac_write_int_mask(vptr->int_mask, regs); + mac_clear_isr(regs); ++ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n"); + + } + } +@@ -659,6 +699,7 @@ + struct mac_regs __iomem * regs = vptr->mac_regs; + int i = 0; + ++ HAIL("velocity_soft_reset"); + writel(CR0_SFRST, ®s->CR0Set); + + for (i = 0; i < W_MAX_TIMEOUT; i++) { +@@ -722,6 +763,7 @@ + VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION); + printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); + printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); ++ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n"); + first = 0; + } + +@@ -935,6 +977,7 @@ + dma_addr_t pool_dma; + u8 *pool; + ++ HAIL("velocity_init_rings"); + /* + * Allocate all RD/TD rings a single pool + */ +@@ -997,6 +1040,7 @@ + static void velocity_free_rings(struct velocity_info *vptr) + { + int size; ++ HAIL("velocity_free_rings"); + + size = vptr->options.numrx * sizeof(struct rx_desc) + + vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq; +@@ -1013,6 +1057,7 @@ + struct mac_regs __iomem *regs = vptr->mac_regs; + int avail, dirty, unusable; + ++ HAIL("velocity_give_many_rx_descs"); + /* + * RD number must be equal to 4X per hardware spec + * (programming guide rev 1.20, p.13) +@@ -1026,7 +1071,8 @@ + dirty = vptr->rd_dirty - unusable; + for (avail = vptr->rd_filled & 0xfffc; avail; avail--) { + dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; +- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; ++ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */ ++ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ + } + + writew(vptr->rd_filled & 0xfffc, ®s->RBRDU); +@@ -1036,12 +1082,14 @@ + static int velocity_rx_refill(struct velocity_info *vptr) + { + int dirty = vptr->rd_dirty, done = 0, ret = 0; ++ HAIL("velocity_rx_refill"); + + do { + struct rx_desc *rd = vptr->rd_ring + dirty; + + /* Fine for an all zero Rx desc at init time as well */ +- if (rd->rdesc0.owner == OWNED_BY_NIC) ++ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */ ++ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ + break; + + if (!vptr->rd_info[dirty].skb) { +@@ -1076,6 +1124,7 @@ + unsigned int rsize = sizeof(struct velocity_rd_info) * + vptr->options.numrx; + ++ HAIL("velocity_init_rd_ring"); + vptr->rd_info = kmalloc(rsize, GFP_KERNEL); + if(vptr->rd_info == NULL) + goto out; +@@ -1105,6 +1154,7 @@ + { + int i; + ++ HAIL("velocity_free_rd_ring"); + if (vptr->rd_info == NULL) + return; + +@@ -1146,6 +1196,7 @@ + unsigned int tsize = sizeof(struct velocity_td_info) * + vptr->options.numtx; + ++ HAIL("velocity_init_td_ring"); + /* Init the TD ring entries */ + for (j = 0; j < vptr->num_txq; j++) { + curr = vptr->td_pool_dma[j]; +@@ -1182,6 +1233,7 @@ + struct velocity_td_info * td_info = &(vptr->td_infos[q][n]); + int i; + ++ HAIL("velocity_free_td_ring_entry"); + if (td_info == NULL) + return; + +@@ -1211,6 +1263,7 @@ + { + int i, j; + ++ HAIL("velocity_free_td_ring"); + for (j = 0; j < vptr->num_txq; j++) { + if (vptr->td_infos[j] == NULL) + continue; +@@ -1238,34 +1291,42 @@ + struct net_device_stats *stats = &vptr->stats; + int rd_curr = vptr->rd_curr; + int works = 0; ++ u16 wRSR; /* BE */ + ++ HAILS("velocity_rx_srv", status); + do { + struct rx_desc *rd = vptr->rd_ring + rd_curr; + + if (!vptr->rd_info[rd_curr].skb) + break; + +- if (rd->rdesc0.owner == OWNED_BY_NIC) ++ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */ ++ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ + break; + + rmb(); + ++ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */ + /* + * Don't drop CE or RL error frame although RXOK is off + */ +- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { ++ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */ ++ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */ + if (velocity_receive_frame(vptr, rd_curr) < 0) + stats->rx_dropped++; + } else { +- if (rd->rdesc0.RSR & RSR_CRC) ++ /* if (rd->rdesc0.RSR & RSR_CRC) BE */ ++ if (wRSR & RSR_CRC) /* BE */ + stats->rx_crc_errors++; +- if (rd->rdesc0.RSR & RSR_FAE) ++ /* if (rd->rdesc0.RSR & RSR_FAE) BE */ ++ if (wRSR & RSR_FAE) /* BE */ + stats->rx_frame_errors++; + + stats->rx_dropped++; + } + +- rd->inten = 1; ++ /* rd->inten = 1; BE */ ++ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */ + + vptr->dev->last_rx = jiffies; + +@@ -1296,13 +1357,21 @@ + + static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) + { ++ u8 bCSM; ++ HAIL("velocity_rx_csum"); + skb->ip_summed = CHECKSUM_NONE; + +- if (rd->rdesc1.CSM & CSM_IPKT) { +- if (rd->rdesc1.CSM & CSM_IPOK) { +- if ((rd->rdesc1.CSM & CSM_TCPKT) || +- (rd->rdesc1.CSM & CSM_UDPKT)) { +- if (!(rd->rdesc1.CSM & CSM_TUPOK)) { ++// if (rd->rdesc1.CSM & CSM_IPKT) { ++// if (rd->rdesc1.CSM & CSM_IPOK) { ++// if ((rd->rdesc1.CSM & CSM_TCPKT) || ++// (rd->rdesc1.CSM & CSM_UDPKT)) { ++// if (!(rd->rdesc1.CSM & CSM_TUPOK)) { ++ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */ ++ if (bCSM & CSM_IPKT) { ++ if (bCSM & CSM_IPOK) { ++ if ((bCSM & CSM_TCPKT) || ++ (bCSM & CSM_UDPKT)) { ++ if (!(bCSM & CSM_TUPOK)) { /* BE */ + return; + } + } +@@ -1328,9 +1397,11 @@ + { + int ret = -1; + ++ HAIL("velocity_rx_copy"); + if (pkt_size < rx_copybreak) { + struct sk_buff *new_skb; + ++ HAIL("velocity_rx_copy (working...)"); + new_skb = dev_alloc_skb(pkt_size + 2); + if (new_skb) { + new_skb->dev = vptr->dev; +@@ -1360,10 +1431,12 @@ + static inline void velocity_iph_realign(struct velocity_info *vptr, + struct sk_buff *skb, int pkt_size) + { ++ HAIL("velocity_iph_realign"); + /* FIXME - memmove ? */ + if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) { + int i; + ++ HAIL("velocity_iph_realign (working...)"); + for (i = pkt_size; i >= 0; i--) + *(skb->data + i + 2) = *(skb->data + i); + skb_reserve(skb, 2); +@@ -1382,19 +1455,27 @@ + static int velocity_receive_frame(struct velocity_info *vptr, int idx) + { + void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); ++ u16 pkt_len; /* BE */ ++ u16 wRSR; /* BE */ ++ struct sk_buff *skb; + struct net_device_stats *stats = &vptr->stats; + struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); + struct rx_desc *rd = &(vptr->rd_ring[idx]); +- int pkt_len = rd->rdesc0.len; +- struct sk_buff *skb; ++ /* int pkt_len = rd->rdesc0.len BE */; ++ ++ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */ ++ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */ + +- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { ++ HAIL("velocity_receive_frame"); ++ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */ ++ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */ + VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name); + stats->rx_length_errors++; + return -EINVAL; + } + +- if (rd->rdesc0.RSR & RSR_MAR) ++ /* if (rd->rdesc0.RSR & RSR_MAR) BE */ ++ if (wRSR & RSR_MAR) /* BE */ + vptr->stats.multicast++; + + skb = rd_info->skb; +@@ -1408,7 +1489,8 @@ + */ + + if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) { +- if (rd->rdesc0.RSR & RSR_RL) { ++ /* if (rd->rdesc0.RSR & RSR_RL) { BE */ ++ if (wRSR & RSR_RL) { /* BE */ + stats->rx_length_errors++; + return -EINVAL; + } +@@ -1452,6 +1534,7 @@ + struct rx_desc *rd = &(vptr->rd_ring[idx]); + struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); + ++ HAIL("velocity_alloc_rx_buf"); + rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64); + if (rd_info->skb == NULL) + return -ENOMEM; +@@ -1469,10 +1552,14 @@ + */ + + *((u32 *) & (rd->rdesc0)) = 0; +- rd->len = cpu_to_le32(vptr->rx_buf_sz); +- rd->inten = 1; ++ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */ ++ /* rd->inten = 1; BE */ + rd->pa_low = cpu_to_le32(rd_info->skb_dma); +- rd->pa_high = 0; ++ /* rd->pa_high = 0; BE */ ++ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */ ++ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */ ++ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */ ++ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */ + return 0; + } + +@@ -1493,9 +1580,11 @@ + int full = 0; + int idx; + int works = 0; ++ u16 wTSR; /* BE */ + struct velocity_td_info *tdinfo; + struct net_device_stats *stats = &vptr->stats; + ++ HAILS("velocity_tx_srv", status); + for (qnum = 0; qnum < vptr->num_txq; qnum++) { + for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0; + idx = (idx + 1) % vptr->options.numtx) { +@@ -1506,22 +1595,29 @@ + td = &(vptr->td_rings[qnum][idx]); + tdinfo = &(vptr->td_infos[qnum][idx]); + +- if (td->tdesc0.owner == OWNED_BY_NIC) ++ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */ ++ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ + break; + + if ((works++ > 15)) + break; + +- if (td->tdesc0.TSR & TSR0_TERR) { ++ wTSR = (u16)cpu_to_le32(td->tdesc0); ++ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */ ++ if (wTSR & TSR0_TERR) { /* BE */ + stats->tx_errors++; + stats->tx_dropped++; +- if (td->tdesc0.TSR & TSR0_CDH) ++ /* if (td->tdesc0.TSR & TSR0_CDH) BE */ ++ if (wTSR & TSR0_CDH) /* BE */ + stats->tx_heartbeat_errors++; +- if (td->tdesc0.TSR & TSR0_CRS) ++ /* if (td->tdesc0.TSR & TSR0_CRS) BE */ ++ if (wTSR & TSR0_CRS) /* BE */ + stats->tx_carrier_errors++; +- if (td->tdesc0.TSR & TSR0_ABT) ++ /* if (td->tdesc0.TSR & TSR0_ABT) BE */ ++ if (wTSR & TSR0_ABT) /* BE */ + stats->tx_aborted_errors++; +- if (td->tdesc0.TSR & TSR0_OWC) ++ /* if (td->tdesc0.TSR & TSR0_OWC) BE */ ++ if (wTSR & TSR0_OWC) /* BE */ + stats->tx_window_errors++; + } else { + stats->tx_packets++; +@@ -1610,6 +1706,7 @@ + + static void velocity_error(struct velocity_info *vptr, int status) + { ++ HAILS("velocity_error", status); + + if (status & ISR_TXSTLI) { + struct mac_regs __iomem * regs = vptr->mac_regs; +@@ -1699,6 +1796,7 @@ + struct sk_buff *skb = tdinfo->skb; + int i; + ++ HAIL("velocity_free_tx_buf"); + /* + * Don't unmap the pre-allocated tx_bufs + */ +@@ -1902,6 +2000,7 @@ + struct velocity_td_info *tdinfo; + unsigned long flags; + int index; ++ u32 lbufsz; /* BE */ + + int pktlen = skb->len; + +@@ -1918,9 +2017,18 @@ + td_ptr = &(vptr->td_rings[qnum][index]); + tdinfo = &(vptr->td_infos[qnum][index]); + +- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; +- td_ptr->tdesc1.TCR = TCR0_TIC; +- td_ptr->td_buf[0].queue = 0; ++ td_ptr->tdesc0 = 0x00000000UL; /* BE */ ++ td_ptr->tdesc1 = 0x00000000UL; /* BE */ ++ ++ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */ ++ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */ ++ ++ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */ ++ ++ /* td_ptr->td_buf[0].queue = 0; BE */ ++ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */ + + /* + * Pad short frames. +@@ -1932,20 +2040,35 @@ + memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len); + tdinfo->skb = skb; + tdinfo->skb_dma[0] = tdinfo->buf_dma; +- td_ptr->tdesc0.pktsize = pktlen; ++ /* td_ptr->tdesc0.pktsize = pktlen; */ ++ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */ ++ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */ ++ lbufsz = lbufsz << 16; /* BE - shift over */ ++ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */ + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); +- td_ptr->td_buf[0].pa_high = 0; +- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; ++ /* td_ptr->td_buf[0].pa_high = 0; */ ++ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */ ++ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */ + tdinfo->nskb_dma = 1; +- td_ptr->tdesc1.CMDZ = 2; ++ /* td_ptr->tdesc1.CMDZ = 2; */ ++ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */ + } else + #ifdef VELOCITY_ZERO_COPY_SUPPORT ++ /* ++ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT: ++ * This block of code has NOT been patched up for BE support, as ++ * it is certainly broken -- if it compiles at all. Since the BE ++ * fixes depend on the broken code, attempts to convert to BE support ++ * would almost certainly confuse more than help. ++ */ + if (skb_shinfo(skb)->nr_frags > 0) { + int nfrags = skb_shinfo(skb)->nr_frags; + tdinfo->skb = skb; + if (nfrags > 6) { + memcpy(tdinfo->buf, skb->data, skb->len); + tdinfo->skb_dma[0] = tdinfo->buf_dma; ++ /* BE: Er, exactly what value are we assigning in this next line? */ + td_ptr->tdesc0.pktsize = + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->td_buf[0].pa_high = 0; +@@ -1962,6 +2085,7 @@ + /* FIXME: support 48bit DMA later */ + td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma); + td_ptr->td_buf[i].pa_high = 0; ++ /* BE: This next line can't be right: */ + td_ptr->td_buf[i].bufsize = skb->len->skb->data_len; + + for (i = 0; i < nfrags; i++) { +@@ -1979,7 +2103,7 @@ + } + + } else +-#endif ++#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */ + { + /* + * Map the linear network buffer into PCI space and +@@ -1987,19 +2111,30 @@ + */ + tdinfo->skb = skb; + tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE); +- td_ptr->tdesc0.pktsize = pktlen; ++ /* td_ptr->tdesc0.pktsize = pktlen; BE */ ++ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */ ++ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */ ++ lbufsz = lbufsz << 16; /* BE */ ++ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */ + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); +- td_ptr->td_buf[0].pa_high = 0; +- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; ++ /* td_ptr->td_buf[0].pa_high = 0; BE */ ++ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */ ++ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */ ++ + tdinfo->nskb_dma = 1; +- td_ptr->tdesc1.CMDZ = 2; ++ /* td_ptr->tdesc1.CMDZ = 2; BE */ ++ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */ + } + + if (vptr->flags & VELOCITY_FLAGS_TAGGING) { +- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); +- td_ptr->tdesc1.pqinf.priority = 0; +- td_ptr->tdesc1.pqinf.CFI = 0; +- td_ptr->tdesc1.TCR |= TCR0_VETAG; ++ /* td_ptr->tdesc1.pqinf.priority = 0; BE */ ++ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */ ++ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */ ++ /* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */ ++ td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */ ++ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */ + } + + /* +@@ -2009,26 +2144,34 @@ + && (skb->ip_summed == CHECKSUM_PARTIAL)) { + struct iphdr *ip = skb->nh.iph; + if (ip->protocol == IPPROTO_TCP) +- td_ptr->tdesc1.TCR |= TCR0_TCPCK; ++ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */ + else if (ip->protocol == IPPROTO_UDP) +- td_ptr->tdesc1.TCR |= (TCR0_UDPCK); +- td_ptr->tdesc1.TCR |= TCR0_IPCK; +- } ++ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */ ++ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */ ++ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */ ++ } + { + + int prev = index - 1; + + if (prev < 0) + prev = vptr->options.numtx - 1; +- td_ptr->tdesc0.owner = OWNED_BY_NIC; ++ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */ ++ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ + vptr->td_used[qnum]++; + vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx; + + if (AVAIL_TD(vptr, qnum) < 1) + netif_stop_queue(dev); + +- td_ptr = &(vptr->td_rings[qnum][prev]); +- td_ptr->td_buf[0].queue = 1; ++ td_ptr = &(vptr->td_rings[qnum][prev]); ++ /* td_ptr->td_buf[0].queue = 1; BE */ ++ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */ ++ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n", ++ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index, ++ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo); + mac_tx_queue_wake(vptr->mac_regs, qnum); + } + dev->trans_start = jiffies; +@@ -2054,7 +2197,7 @@ + u32 isr_status; + int max_count = 0; + +- ++ HAIL("velocity_intr"); + spin_lock(&vptr->lock); + isr_status = mac_read_isr(vptr->mac_regs); + +@@ -2073,7 +2216,10 @@ + + while (isr_status != 0) { + mac_write_isr(vptr->mac_regs, isr_status); +- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) ++ HAILS("velocity_intr",isr_status); ++ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */ ++ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */ ++ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0))) + velocity_error(vptr, isr_status); + if (isr_status & (ISR_PRXI | ISR_PPRXI)) + max_count += velocity_rx_srv(vptr, isr_status); +@@ -2111,6 +2257,7 @@ + int i; + struct dev_mc_list *mclist; + ++ HAIL("velocity_set_multi"); + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + writel(0xffffffff, ®s->MARCAM[0]); + writel(0xffffffff, ®s->MARCAM[4]); +@@ -2154,6 +2301,7 @@ + { + struct velocity_info *vptr = netdev_priv(dev); + ++ HAIL("net_device_stats"); + /* If the hardware is down, don't touch MII */ + if(!netif_running(dev)) + return &vptr->stats; +@@ -2198,6 +2346,7 @@ + struct velocity_info *vptr = netdev_priv(dev); + int ret; + ++ HAIL("velocity_ioctl"); + /* If we are asked for information and the device is power + saving then we need to bring the device back up to talk to it */ + +@@ -2416,6 +2565,7 @@ + { + u16 ww; + ++ HAIL("velocity_mii_read"); + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ +@@ -2452,6 +2602,7 @@ + { + u16 ww; + ++ HAIL("velocity_mii_write"); + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ +Index: linux-2.6.20-rc3/drivers/net/via-velocity.h +=================================================================== +--- linux-2.6.20-rc3.orig/drivers/net/via-velocity.h 2006-11-29 21:57:37.000000000 +0000 ++++ linux-2.6.20-rc3/drivers/net/via-velocity.h 2007-01-02 10:30:36.265114211 +0000 +@@ -196,64 +196,70 @@ + * Receive descriptor + */ + +-struct rdesc0 { +- u16 RSR; /* Receive status */ +- u16 len:14; /* Received packet length */ +- u16 reserved:1; +- u16 owner:1; /* Who owns this buffer ? */ +-}; +- +-struct rdesc1 { +- u16 PQTAG; +- u8 CSM; +- u8 IPKT; +-}; ++//struct rdesc0 { ++// u16 RSR; /* Receive status */ ++// u16 len:14; /* Received packet length */ ++// u16 reserved:1; ++// u16 owner:1; /* Who owns this buffer ? */ ++//}; ++ ++//struct rdesc1 { ++// u16 PQTAG; ++// u8 CSM; ++// u8 IPKT; ++//}; + + struct rx_desc { +- struct rdesc0 rdesc0; +- struct rdesc1 rdesc1; ++// struct rdesc0 rdesc0; ++// struct rdesc1 rdesc1; ++ u32 rdesc0; ++ u32 rdesc1; + u32 pa_low; /* Low 32 bit PCI address */ +- u16 pa_high; /* Next 16 bit PCI address (48 total) */ +- u16 len:15; /* Frame size */ +- u16 inten:1; /* Enable interrupt */ ++// u16 pa_high; /* Next 16 bit PCI address (48 total) */ ++// u16 len:15; /* Frame size */ ++// u16 inten:1; /* Enable interrupt */ ++ u32 ltwo; + } __attribute__ ((__packed__)); + + /* + * Transmit descriptor + */ + +-struct tdesc0 { +- u16 TSR; /* Transmit status register */ +- u16 pktsize:14; /* Size of frame */ +- u16 reserved:1; +- u16 owner:1; /* Who owns the buffer */ +-}; +- +-struct pqinf { /* Priority queue info */ +- u16 VID:12; +- u16 CFI:1; +- u16 priority:3; +-} __attribute__ ((__packed__)); +- +-struct tdesc1 { +- struct pqinf pqinf; +- u8 TCR; +- u8 TCPLS:2; +- u8 reserved:2; +- u8 CMDZ:4; +-} __attribute__ ((__packed__)); ++//struct tdesc0 { ++// u16 TSR; /* Transmit status register */ ++// u16 pktsize:14; /* Size of frame */ ++// u16 reserved:1; ++// u16 owner:1; /* Who owns the buffer */ ++//}; ++ ++//struct pqinf { /* Priority queue info */ ++// u16 VID:12; ++// u16 CFI:1; ++// u16 priority:3; ++//} __attribute__ ((__packed__)); ++ ++//struct tdesc1 { ++// struct pqinf pqinf; ++// u8 TCR; ++// u8 TCPLS:2; ++// u8 reserved:2; ++// u8 CMDZ:4; ++//} __attribute__ ((__packed__)); + + struct td_buf { + u32 pa_low; +- u16 pa_high; +- u16 bufsize:14; +- u16 reserved:1; +- u16 queue:1; ++// u16 pa_high; ++// u16 bufsize:14; ++// u16 reserved:1; ++// u16 queue:1; ++ u32 ltwo; + } __attribute__ ((__packed__)); + + struct tx_desc { +- struct tdesc0 tdesc0; +- struct tdesc1 tdesc1; ++// struct tdesc0 tdesc0; ++// struct tdesc1 tdesc1; ++ u32 tdesc0; ++ u32 tdesc1; + struct td_buf td_buf[7]; + }; + +@@ -279,6 +285,16 @@ + OWNED_BY_NIC = 1 + }; + ++/* Constants added for the BE fixes */ ++#define BE_OWNED_BY_NIC 0x80000000UL ++#define BE_INT_ENABLE 0x80000000UL ++#define BE_QUEUE_ENABLE 0x80000000UL ++#define BE_TCR_TIC 0x00800000UL ++#define BE_TCR_VETAG 0x00200000UL ++#define BE_TCR_TCPCK 0x00040000UL ++#define BE_TCR_UDPCK 0x00080000UL ++#define BE_TCR_IPCK 0x00100000UL ++ + + /* + * MAC registers and macros. +@@ -1698,6 +1714,7 @@ + }; + + struct velocity_opt { ++ int velo_debug; /* debug flag */ + int numrx; /* Number of RX descriptors */ + int numtx; /* Number of TX descriptors */ + enum speed_opt spd_dpx; /* Media link mode */ diff --git a/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch b/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch new file mode 100644 index 0000000..2c379d2 --- /dev/null +++ b/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch @@ -0,0 +1,54 @@ +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c +@@ -20,6 +20,7 @@ + #include <linux/leds.h> + #include <linux/mtd/mtd.h> + ++#include <asm/setup.h> + #include <asm/mach-types.h> + #include <asm/mach/arch.h> + #include <asm/mach/flash.h> +@@ -239,11 +240,41 @@ static void __init nslu2_init(void) + register_mtd_user(&nslu2_flash_notifier); + } + ++static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f "; ++ ++static void __init nslu2_fixup(struct machine_desc *desc, ++ struct tag *tags, char **cmdline, struct meminfo *mi) ++{ ++ struct tag *t = tags; ++ char *p = *cmdline; ++ ++ /* Find the end of the tags table, taking note of any cmdline tag. */ ++ for (; t->hdr.size; t = tag_next(t)) { ++ if (t->hdr.tag == ATAG_CMDLINE) { ++ p = t->u.cmdline.cmdline; ++ } ++ } ++ ++ /* Overwrite the end of the table with a new cmdline tag. */ ++ t->hdr.tag = ATAG_CMDLINE; ++ t->hdr.size = (sizeof (struct tag_header) + ++ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2; ++ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE); ++ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p, ++ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe)); ++ ++ /* Terminate the table. */ ++ t = tag_next(t); ++ t->hdr.tag = ATAG_NONE; ++ t->hdr.size = 0; ++} ++ + MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, ++ .fixup = nslu2_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch b/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch new file mode 100644 index 0000000..f594802 --- /dev/null +++ b/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch @@ -0,0 +1,55 @@ +Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c +@@ -18,6 +18,7 @@ + #include <linux/leds.h> + #include <linux/mtd/mtd.h> + ++#include <asm/setup.h> + #include <asm/mach-types.h> + #include <asm/mach/arch.h> + #include <asm/mach/flash.h> +@@ -225,11 +226,42 @@ static void __init nas100d_init(void) + register_mtd_user(&nas100d_flash_notifier); + } + ++static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 "; ++ ++static void __init nas100d_fixup(struct machine_desc *desc, ++ struct tag *tags, char **cmdline, struct meminfo *mi) ++{ ++ struct tag *t = tags; ++ char *p = *cmdline; ++ ++ /* Find the end of the tags table, taking note of any cmdline tag. */ ++ for (; t->hdr.size; t = tag_next(t)) { ++ if (t->hdr.tag == ATAG_CMDLINE) { ++ p = t->u.cmdline.cmdline; ++ } ++ } ++ ++ /* Overwrite the end of the table with a new cmdline tag. */ ++ t->hdr.tag = ATAG_CMDLINE; ++ t->hdr.size = ++ (sizeof (struct tag_header) + ++ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2; ++ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE); ++ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p, ++ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe)); ++ ++ /* Terminate the table. */ ++ t = tag_next(t); ++ t->hdr.tag = ATAG_NONE; ++ t->hdr.size = 0; ++} ++ + MACHINE_START(NAS100D, "Iomega NAS 100d") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, ++ .fixup = nas100d_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch new file mode 100644 index 0000000..04e51cd --- /dev/null +++ b/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch @@ -0,0 +1,57 @@ +Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c +=================================================================== +--- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:29:44.000000000 -0700 ++++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:31:15.000000000 -0700 +@@ -15,6 +15,7 @@ + #include <linux/serial.h> + #include <linux/serial_8250.h> + ++#include <asm/setup.h> + #include <asm/mach-types.h> + #include <asm/mach/arch.h> + #include <asm/mach/flash.h> +@@ -142,6 +143,36 @@ + .init = dsmg600_timer_init, + }; + ++static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 "; ++ ++static void __init dsmg600_fixup(struct machine_desc *desc, ++ struct tag *tags, char **cmdline, struct meminfo *mi) ++{ ++ struct tag *t = tags; ++ char *p = *cmdline; ++ ++ /* Find the end of the tags table, taking note of any cmdline tag. */ ++ for (; t->hdr.size; t = tag_next(t)) { ++ if (t->hdr.tag == ATAG_CMDLINE) { ++ p = t->u.cmdline.cmdline; ++ } ++ } ++ ++ /* Overwrite the end of the table with a new cmdline tag. */ ++ t->hdr.tag = ATAG_CMDLINE; ++ t->hdr.size = ++ (sizeof (struct tag_header) + ++ strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2; ++ strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE); ++ strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p, ++ COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe)); ++ ++ /* Terminate the table. */ ++ t = tag_next(t); ++ t->hdr.tag = ATAG_NONE; ++ t->hdr.size = 0; ++} ++ + static void __init dsmg600_init(void) + { + ixp4xx_sys_init(); +@@ -174,6 +205,7 @@ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, ++ .fixup = dsmg600_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &dsmg600_timer, diff --git a/target/linux/ixp4xx/patches/200-gateway_7001.patch b/target/linux/ixp4xx/patches/200-gateway_7001.patch new file mode 100644 index 0000000..80cf000 --- /dev/null +++ b/target/linux/ixp4xx/patches/200-gateway_7001.patch @@ -0,0 +1,250 @@ +diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S +--- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-04-02 15:39:28.000000000 +0200 +@@ -46,6 +46,11 @@ + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) + #endif + ++#ifdef CONFIG_MACH_GATEWAY7001 ++ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) ++ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) ++#endif ++ + #ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-04-02 15:39:28.000000000 +0200 +@@ -0,0 +1,68 @@ ++/* ++ * arch/arch/mach-ixp4xx/gateway7001-pci.c ++ * ++ * PCI setup routines for Gateway 7001 ++ * ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * based on coyote-pci.c: ++ * Copyright (C) 2002 Jungo Software Technologies. ++ * Copyright (C) 2003 MontaVista Softwrae, Inc. ++ * ++ * Maintainer: Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-types.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/pci.h> ++ ++extern void ixp4xx_pci_preinit(void); ++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); ++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ++ ++void __init gateway7001_pci_preinit(void) ++{ ++ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ if (slot == 1) ++ return IRQ_IXP4XX_GPIO11; ++ else if (slot == 2) ++ return IRQ_IXP4XX_GPIO10; ++ else return -1; ++} ++ ++struct hw_pci gateway7001_pci __initdata = { ++ .nr_controllers = 1, ++ .preinit = gateway7001_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = gateway7001_map_irq, ++}; ++ ++int __init gateway7001_pci_init(void) ++{ ++ if (machine_is_gateway7001()) ++ pci_common_init(&gateway7001_pci); ++ return 0; ++} ++ ++subsys_initcall(gateway7001_pci_init); +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:49:28.000000000 +0200 +@@ -0,0 +1,108 @@ ++/* ++ * arch/arm/mach-ixp4xx/gateway7001-setup.c ++ * ++ * Board setup for the Gateway 7001 board ++ * ++ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org> ++ * ++ * based on coyote-setup.c: ++ * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * ++ * Author: Imre Kaloz <Kaloz@openwrt.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++#include <linux/slab.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data gateway7001_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource gateway7001_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device gateway7001_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &gateway7001_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &gateway7001_flash_resource, ++}; ++ ++static struct resource gateway7001_uart_resource = { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct plat_serial8250_port gateway7001_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { }, ++}; ++ ++static struct platform_device gateway7001_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev = { ++ .platform_data = gateway7001_uart_data, ++ }, ++ .num_resources = 1, ++ .resource = &gateway7001_uart_resource, ++}; ++ ++static struct platform_device *gateway7001_devices[] __initdata = { ++ &gateway7001_flash, ++ &gateway7001_uart ++}; ++ ++static void __init gateway7001_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; ++ ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ ++ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); ++} ++ ++#ifdef CONFIG_MACH_GATEWAY7001 ++MACHINE_START(GATEWAY7001, "Gateway 7001 AP") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = gateway7001_init, ++MACHINE_END ++#endif +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 15:39:28.000000000 +0200 +@@ -33,6 +33,14 @@ + Engineering Coyote Gateway Reference Platform. For more + information on this platform, see <file:Documentation/arm/IXP4xx>. + ++config MACH_GATEWAY7001 ++ bool "Gateway 7001" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support Gateway's ++ 7001 Access Point. For more information on this platform, ++ see http://openwrt.org ++ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 15:49:49.000000000 +0200 +@@ -11,6 +11,7 @@ + obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o + obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o + obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o ++obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o + + obj-y += common.o + +@@ -20,5 +21,6 @@ + obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o + obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o + obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o ++obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h +--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 15:42:04.000000000 +0200 +@@ -38,9 +38,9 @@ + static __inline__ void __arch_decomp_setup(unsigned long arch_id) + { + /* +- * Coyote and gtwx5715 only have UART2 connected ++ * Some boards are using UART2 as console + */ +- if (machine_is_adi_coyote() || machine_is_gtwx5715()) ++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch b/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch new file mode 100644 index 0000000..8b3f4b9 --- /dev/null +++ b/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch @@ -0,0 +1,62 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:56:39.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:57:38.000000000 +0200 +@@ -76,9 +76,57 @@ + .resource = &gateway7001_uart_resource, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 1, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 2, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *gateway7001_devices[] __initdata = { + &gateway7001_flash, +- &gateway7001_uart ++ &gateway7001_uart, ++ &mac0, ++ &mac1, + }; + + static void __init gateway7001_init(void) diff --git a/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch b/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch new file mode 100644 index 0000000..c15c5f6 --- /dev/null +++ b/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch @@ -0,0 +1,67 @@ +--- linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c.orig 2007-06-19 18:03:37.202848276 +0100 ++++ linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-06-19 18:09:04.152969985 +0100 +@@ -16,6 +16,7 @@ + #include <linux/device.h> + #include <linux/serial.h> + #include <linux/tty.h> ++#include <linux/mtd/mtd.h> + #include <linux/serial_8250.h> + #include <linux/slab.h> + +@@ -122,11 +123,48 @@ + .resource = &res_mac1, + }; + ++struct npe_ucode_platform_data gateway7001_npe_ucode_data = { ++ .mtd_partition = "microcode", ++}; ++ ++static struct platform_device gateway7001_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &gateway7001_npe_ucode_data, ++}; ++ + static struct platform_device *gateway7001_devices[] __initdata = { + &gateway7001_flash, + &gateway7001_uart, + &mac0, + &mac1, ++ &gateway7001_npe_ucode, ++}; ++ ++static void gateway7001_flash_add(struct mtd_info *mtd) ++{ ++ if (strcmp(mtd->name, "RedBoot config") == 0) { ++ size_t retlen; ++ u_char mac0[6], mac1[6]; ++ if (mtd->read(mtd, 0x0422, 6, &retlen, mac0) == 0 && retlen == 6) { ++ printk(KERN_INFO "gateway 7001 mac0: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac0[0], mac0[1], mac0[2], mac0[3], mac0[4], mac0[5]); ++ memcpy(plat_mac0.hwaddr, mac0, 6); ++ } ++ if (mtd->read(mtd, 0x043B, 6, &retlen, mac1) == 0 && retlen == 6) { ++ printk(KERN_INFO "gateway 7001 mac1: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac1[0], mac1[1], mac1[2], mac1[3], mac1[4], mac1[5]); ++ memcpy(plat_mac1.hwaddr, mac1, 6); ++ } ++ } ++} ++ ++static void gateway7001_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier gateway7001_flash_notifier = { ++ .add = gateway7001_flash_add, ++ .remove = gateway7001_flash_remove, + }; + + static void __init gateway7001_init(void) +@@ -140,6 +178,7 @@ + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); ++ register_mtd_user(&gateway7001_flash_notifier); + } + + #ifdef CONFIG_MACH_GATEWAY7001 diff --git a/target/linux/ixp4xx/patches/300-wg302v2.patch b/target/linux/ixp4xx/patches/300-wg302v2.patch new file mode 100644 index 0000000..8dc1d72 --- /dev/null +++ b/target/linux/ixp4xx/patches/300-wg302v2.patch @@ -0,0 +1,231 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:09:06.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:01:25.000000000 +0200 +@@ -41,6 +41,14 @@ + 7001 Access Point. For more information on this platform, + see http://openwrt.org + ++config MACH_WG302V2 ++ bool "Netgear WG302 v2 / WAG302 v2" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support Netgear's ++ WG302 v2 or WAG302 v2 Access Points. For more information ++ on this platform, see http://openwrt.org ++ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:06.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:25.000000000 +0200 +@@ -12,6 +12,7 @@ + obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o + obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o + obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o ++obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o + + obj-y += common.o + +@@ -22,5 +23,6 @@ + obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o + obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o + obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o ++obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c 2007-04-02 16:00:12.000000000 +0200 +@@ -0,0 +1,68 @@ ++/* ++ * arch/arch/mach-ixp4xx/wg302v2-pci.c ++ * ++ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2 ++ * ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * based on coyote-pci.c: ++ * Copyright (C) 2002 Jungo Software Technologies. ++ * Copyright (C) 2003 MontaVista Software, Inc. ++ * ++ * Maintainer: Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-types.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/pci.h> ++ ++extern void ixp4xx_pci_preinit(void); ++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); ++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ++ ++void __init wg302v2_pci_preinit(void) ++{ ++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ if (slot == 1) ++ return IRQ_IXP4XX_GPIO8; ++ else if (slot == 2) ++ return IRQ_IXP4XX_GPIO9; ++ else return -1; ++} ++ ++struct hw_pci wg302v2_pci __initdata = { ++ .nr_controllers = 1, ++ .preinit = wg302v2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = wg302v2_map_irq, ++}; ++ ++int __init wg302v2_pci_init(void) ++{ ++ if (machine_is_wg302v2()) ++ pci_common_init(&wg302v2_pci); ++ return 0; ++} ++ ++subsys_initcall(wg302v2_pci_init); +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:08:57.000000000 +0200 +@@ -0,0 +1,107 @@ ++/* ++ * arch/arm/mach-ixp4xx/wg302-setup.c ++ * ++ * Board setup for the Netgear WG302 v2 and WAG302 v2 ++ * ++ * based on coyote-setup.c: ++ * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * ++ * Maintainer: Imre Kaloz <kaloz@openwrt.org> ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++#include <linux/slab.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data wg302v2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource wg302v2_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device wg302v2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &wg302v2_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &wg302v2_flash_resource, ++}; ++ ++static struct resource wg302v2_uart_resource = { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct plat_serial8250_port wg302v2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { }, ++}; ++ ++static struct platform_device wg302v2_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev = { ++ .platform_data = wg302v2_uart_data, ++ }, ++ .num_resources = 1, ++ .resource = &wg302v2_uart_resource, ++}; ++ ++static struct platform_device *wg302v2_devices[] __initdata = { ++ &wg302v2_flash, ++ &wg302v2_uart, ++}; ++ ++static void __init wg302v2_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; ++ ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ ++ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices)); ++} ++ ++#ifdef CONFIG_MACH_WG302V2 ++MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = wg302v2_init, ++MACHINE_END ++#endif +diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h +--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:09:06.000000000 +0200 ++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:02:04.000000000 +0200 +@@ -40,7 +40,7 @@ + /* + * Some boards are using UART2 as console + */ +- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) ++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch b/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch new file mode 100644 index 0000000..27616e1 --- /dev/null +++ b/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch @@ -0,0 +1,37 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:06:02.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-03-05 11:57:24.000000000 +0100 +@@ -75,9 +75,33 @@ + .resource = &wg302v2_uart_resource, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 8, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ + static struct platform_device *wg302v2_devices[] __initdata = { + &wg302v2_flash, + &wg302v2_uart, ++ &mac0, + }; + + static void __init wg302v2_init(void) diff --git a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch new file mode 100644 index 0000000..8b88e10 --- /dev/null +++ b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch @@ -0,0 +1,251 @@ +diff -Nur linux-2.6.21.1/Documentation/arm/IXP4xx linux-2.6.21.1-owrt/Documentation/arm/IXP4xx +--- linux-2.6.21.1/Documentation/arm/IXP4xx 2007-06-10 13:54:49.000000000 +0200 ++++ linux-2.6.21.1-owrt/Documentation/arm/IXP4xx 2007-06-10 13:46:37.000000000 +0200 +@@ -111,6 +111,9 @@ + the platform has two mini-PCI slots used for 802.11[bga] cards. + Finally, there is an IDE port hanging off the expansion bus. + ++ADI Engineering Pronghorn Metro Platform ++http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85 ++ + Gateworks Avila Network Platform + http://www.gateworks.com/avila_sbc.htm + +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:54:47.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:46:37.000000000 +0200 +@@ -57,6 +57,14 @@ + WG302 v2 or WAG302 v2 Access Points. For more information + on this platform, see http://openwrt.org + ++config MACH_PRONGHORNMETRO ++ bool "Pronghorn Metro" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support the ADI ++ Engineering Pronghorn Metro Platform. For more ++ information on this platform, see <file:Documentation/arm/IXP4xx>. ++ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:54:47.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:46:37.000000000 +0200 +@@ -14,6 +14,7 @@ + obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o + obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o + obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o ++obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o + + obj-y += common.o + +@@ -26,5 +27,6 @@ + obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o + obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o + obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o ++obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2007-06-10 13:50:08.000000000 +0200 +@@ -0,0 +1,74 @@ ++/* ++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c ++ * ++ * PCI setup routines for ADI Engineering Pronghorn Metro ++ * ++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * based on coyote-pci.c: ++ * Copyright (C) 2002 Jungo Software Technologies. ++ * Copyright (C) 2003 MontaVista Softwrae, Inc. ++ * ++ * Maintainer: Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-types.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/pci.h> ++ ++extern void ixp4xx_pci_preinit(void); ++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); ++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ++ ++void __init pronghornmetro_pci_preinit(void) ++{ ++ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ if (slot == 13) ++ return IRQ_IXP4XX_GPIO4; ++ else if (slot == 14) ++ return IRQ_IXP4XX_GPIO6; ++ else if (slot == 15) ++ return IRQ_IXP4XX_GPIO11; ++ else if (slot == 16) ++ return IRQ_IXP4XX_GPIO1; ++ else return -1; ++} ++ ++struct hw_pci pronghornmetro_pci __initdata = { ++ .nr_controllers = 1, ++ .preinit = pronghornmetro_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = pronghornmetro_map_irq, ++}; ++ ++int __init pronghornmetro_pci_init(void) ++{ ++ if (machine_is_pronghorn_metro()) ++ pci_common_init(&pronghornmetro_pci); ++ return 0; ++} ++ ++subsys_initcall(pronghornmetro_pci_init); +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 13:51:51.000000000 +0200 +@@ -0,0 +1,108 @@ ++/* ++ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c ++ * ++ * Board setup for the ADI Engineering Pronghorn Metro ++ * ++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> ++ * ++ * based on coyote-setup.c: ++ * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * ++ * Author: Imre Kaloz <Kaloz@openwrt.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++#include <linux/slab.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data pronghornmetro_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource pronghornmetro_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device pronghornmetro_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &pronghornmetro_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &pronghornmetro_flash_resource, ++}; ++ ++static struct resource pronghornmetro_uart_resource = { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct plat_serial8250_port pronghornmetro_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { }, ++}; ++ ++static struct platform_device pronghornmetro_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev = { ++ .platform_data = pronghornmetro_uart_data, ++ }, ++ .num_resources = 1, ++ .resource = &pronghornmetro_uart_resource, ++}; ++ ++static struct platform_device *pronghornmetro_devices[] __initdata = { ++ &pronghornmetro_flash, ++ &pronghornmetro_uart, ++}; ++ ++static void __init pronghornmetro_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1; ++ ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ ++ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); ++} ++ ++#ifdef CONFIG_MACH_PRONGHORNMETRO ++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = pronghornmetro_init, ++MACHINE_END ++#endif +diff -Nur linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h +--- linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:54:52.000000000 +0200 ++++ linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:49:37.000000000 +0200 +@@ -40,7 +40,7 @@ + /* + * Some boards are using UART2 as console + */ +- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2()) ++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch b/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch new file mode 100644 index 0000000..54621d6 --- /dev/null +++ b/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch @@ -0,0 +1,61 @@ +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:47.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:38.000000000 +0200 +@@ -76,9 +76,57 @@ + .resource = &pronghornmetro_uart_resource, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 0, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 1, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *pronghornmetro_devices[] __initdata = { + &pronghornmetro_flash, + &pronghornmetro_uart, ++ &mac0, ++ &mac1, + }; + + static void __init pronghornmetro_init(void) diff --git a/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch b/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch new file mode 100644 index 0000000..0c304c7 --- /dev/null +++ b/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch @@ -0,0 +1,55 @@ +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:24.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:15.000000000 +0200 +@@ -17,6 +17,7 @@ + #include <linux/serial.h> + #include <linux/tty.h> + #include <linux/serial_8250.h> ++#include <linux/mtd/mtd.h> + #include <linux/slab.h> + + #include <asm/types.h> +@@ -122,11 +123,34 @@ + .resource = &res_mac1, + }; + ++struct npe_ucode_platform_data pronghornmetro_npe_ucode_data = { ++ .mtd_partition = "RedBoot", ++}; ++ ++static struct platform_device pronghornmetro_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &pronghornmetro_npe_ucode_data, ++}; ++ + static struct platform_device *pronghornmetro_devices[] __initdata = { + &pronghornmetro_flash, + &pronghornmetro_uart, + &mac0, + &mac1, ++ &pronghornmetro_npe_ucode, ++}; ++ ++static void pronghornmetro_flash_add(struct mtd_info *mtd) ++{ ++} ++ ++static void pronghornmetro_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier pronghornmetro_flash_notifier = { ++ .add = pronghornmetro_flash_add, ++ .remove = pronghornmetro_flash_remove, + }; + + static void __init pronghornmetro_init(void) +@@ -140,6 +164,8 @@ + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); ++ ++ register_mtd_user(&pronghornmetro_flash_notifier); + } + + #ifdef CONFIG_MACH_PRONGHORNMETRO diff --git a/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch b/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch new file mode 100644 index 0000000..d2982bc --- /dev/null +++ b/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch @@ -0,0 +1,57 @@ +diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c +--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:31:27.000000000 +0200 ++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:36:23.000000000 +0200 +@@ -77,6 +77,35 @@ + .resource = &pronghornmetro_uart_resource, + }; + ++static struct resource pronghornmetro_pata_resources[] = { ++ { ++ .flags = IORESOURCE_MEM ++ }, ++ { ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "intrq", ++ .start = IRQ_IXP4XX_GPIO0, ++ .end = IRQ_IXP4XX_GPIO0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct ixp4xx_pata_data pronghornmetro_pata_data = { ++ .cs0_bits = 0xbfff0043, ++ .cs1_bits = 0xbfff0043, ++}; ++ ++static struct platform_device pronghornmetro_pata = { ++ .name = "pata_ixp4xx_cf", ++ .id = 0, ++ .dev.platform_data = &pronghornmetro_pata_data, ++ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources), ++ .resource = pronghornmetro_pata_resources, ++}; ++ ++ + static struct resource res_mac0 = { + .start = IXP4XX_EthB_BASE_PHYS, + .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, +@@ -165,6 +194,17 @@ + + platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); + ++ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); ++ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1); ++ ++ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2); ++ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2); ++ ++ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1; ++ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2; ++ ++ platform_device_register(&pronghornmetro_pata); ++ + register_mtd_user(&pronghornmetro_flash_notifier); + } + diff --git a/target/linux/ixp4xx/patches/500-compex.patch b/target/linux/ixp4xx/patches/500-compex.patch new file mode 100644 index 0000000..854194b --- /dev/null +++ b/target/linux/ixp4xx/patches/500-compex.patch @@ -0,0 +1,184 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-10 01:56:21.000000000 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * arch/arm/mach-ixp4xx/compex-setup.c ++ * ++ * Ccompex WP18 / NP18A board-setup ++ * ++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> ++ * ++ * based on ixdp425-setup.c: ++ * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * ++ * Author: Imre Kaloz <Kaloz@openwrt.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++#include <linux/slab.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data compex_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource compex_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device compex_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &compex_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &compex_flash_resource, ++}; ++ ++static struct resource compex_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ } ++}; ++ ++static struct plat_serial8250_port compex_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { }, ++}; ++ ++static struct platform_device compex_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = compex_uart_data, ++ .num_resources = 2, ++ .resource = compex_uart_resources ++}; ++ ++static struct platform_device *compex_devices[] __initdata = { ++ &compex_flash, ++ &compex_uart ++}; ++ ++static void __init compex_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ compex_flash_resource.end = ++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; ++ ++ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); ++} ++ ++#ifdef CONFIG_MACH_COMPEX ++MACHINE_START(COMPEX, "Compex WP18 / NP18A") ++ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = compex_init, ++MACHINE_END ++#endif +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-04-10 00:22:16.000000000 +0200 +@@ -66,7 +66,7 @@ + int __init ixdp425_pci_init(void) + { + if (machine_is_ixdp425() || machine_is_ixcdp1100() || +- machine_is_ixdp465()) ++ machine_is_ixdp465() || machine_is_compex()) + pci_common_init(&ixdp425_pci); + return 0; + } +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:33:31.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:48:37.000000000 +0200 +@@ -57,6 +57,14 @@ + Engineering Pronghorn Metro Platform. For more + information on this platform, see <file:Documentation/arm/IXP4xx>. + ++config MACH_COMPEX ++ bool "Compex WP18 / NP18A" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support Compex' ++ WP18 or NP18A boards. For more information on this ++ platform, see http://openwrt.org ++ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-10 00:33:39.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-09 20:23:06.000000000 +0200 +@@ -14,6 +14,7 @@ + obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o + obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o + obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o ++obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o + + obj-y += common.o + +@@ -26,5 +27,6 @@ + obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o + obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o + obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o ++obj-$(CONFIG_MACH_COMPEX) += compex-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +diff -Nur linux-2.6.19.2/arch/arm/tools/mach-types linux-2.6.19.2-owrt/arch/arm/tools/mach-types +--- linux-2.6.19.2/arch/arm/tools/mach-types 2007-04-10 01:27:55.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/tools/mach-types 2007-04-09 20:22:33.000000000 +0200 +@@ -1278,7 +1278,7 @@ + smdk6400 MACH_SMDK6400 SMDK6400 1270 + nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 + greenphone MACH_GREENPHONE GREENPHONE 1272 +-compex42x MACH_COMPEXWP18 COMPEXWP18 1273 ++compex MACH_COMPEX COMPEX 1273 + xmate MACH_XMATE XMATE 1274 + energizer MACH_ENERGIZER ENERGIZER 1275 + ime1 MACH_IME1 IME1 1276 diff --git a/target/linux/ixp4xx/patches/510-compex_setup_mac.patch b/target/linux/ixp4xx/patches/510-compex_setup_mac.patch new file mode 100644 index 0000000..ed85df0 --- /dev/null +++ b/target/linux/ixp4xx/patches/510-compex_setup_mac.patch @@ -0,0 +1,62 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:30:37.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:36:23.000000000 +0200 +@@ -90,9 +90,57 @@ + .resource = compex_uart_resources + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = -1, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 3, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *compex_devices[] __initdata = { + &compex_flash, +- &compex_uart ++ &compex_uart, ++ &mac0, ++ &mac1, + }; + + static void __init compex_init(void) diff --git a/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch b/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch new file mode 100644 index 0000000..9084223 --- /dev/null +++ b/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch @@ -0,0 +1,55 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:51:57.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 21:48:22.000000000 +0200 +@@ -17,6 +17,7 @@ + #include <linux/serial.h> + #include <linux/tty.h> + #include <linux/serial_8250.h> ++#include <linux/mtd/mtd.h> + #include <linux/slab.h> + + #include <asm/types.h> +@@ -136,11 +137,34 @@ + .resource = &res_mac1, + }; + ++struct npe_ucode_platform_data compex_npe_ucode_data = { ++ .mtd_partition = "RedBoot", ++}; ++ ++static struct platform_device compex_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &compex_npe_ucode_data, ++}; ++ + static struct platform_device *compex_devices[] __initdata = { + &compex_flash, + &compex_uart, + &mac0, + &mac1, ++ &compex_npe_ucode, ++}; ++ ++static void compex_flash_add(struct mtd_info *mtd) ++{ ++} ++ ++static void compex_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier compex_flash_notifier = { ++ .add = compex_flash_add, ++ .remove = compex_flash_remove, + }; + + static void __init compex_init(void) +@@ -152,6 +176,8 @@ + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); ++ ++ register_mtd_user(&compex_flash_notifier); + } + + #ifdef CONFIG_ARCH_COMPEX diff --git a/target/linux/ixp4xx/patches/600-wrt300nv2.patch b/target/linux/ixp4xx/patches/600-wrt300nv2.patch new file mode 100644 index 0000000..9697e5d --- /dev/null +++ b/target/linux/ixp4xx/patches/600-wrt300nv2.patch @@ -0,0 +1,229 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-05-03 23:17:47.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-24 14:25:02.000000000 +0200 +@@ -65,6 +65,14 @@ + WP18 or NP18A boards. For more information on this + platform, see http://openwrt.org + ++config MACH_WRT300NV2 ++ bool "Linksys WRT300N v2" ++ select PCI ++ help ++ Say 'Y' here if you want your kernel to support Linksys' ++ WRT300N v2 router. For more information on this ++ platform, see http://openwrt.org ++ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-05-03 23:17:47.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-24 14:25:02.000000000 +0200 +@@ -15,6 +15,7 @@ + obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o + obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o + obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o ++obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o + + obj-y += common.o + +@@ -28,5 +29,6 @@ + obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o + obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o + obj-$(CONFIG_MACH_COMPEX) += compex-setup.o ++obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o + + obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-05-10 10:40:54.000000000 +0200 +@@ -0,0 +1,65 @@ ++/* ++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c ++ * ++ * PCI setup routines for Linksys WRT300N v2 ++ * ++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * based on coyote-pci.c: ++ * Copyright (C) 2002 Jungo Software Technologies. ++ * Copyright (C) 2003 MontaVista Softwrae, Inc. ++ * ++ * Maintainer: Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach-types.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/pci.h> ++ ++extern void ixp4xx_pci_preinit(void); ++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); ++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ++ ++void __init wrt300nv2_pci_preinit(void) ++{ ++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ if (slot == 1) ++ return IRQ_IXP4XX_GPIO8; ++ else return -1; ++} ++ ++struct hw_pci wrt300nv2_pci __initdata = { ++ .nr_controllers = 1, ++ .preinit = wrt300nv2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = wrt300nv2_map_irq, ++}; ++ ++int __init wrt300nv2_pci_init(void) ++{ ++ if (machine_is_wrt300nv2()) ++ pci_common_init(&wrt300nv2_pci); ++ return 0; ++} ++ ++subsys_initcall(wrt300nv2_pci_init); +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-05-03 23:16:53.000000000 +0200 +@@ -0,0 +1,108 @@ ++/* ++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c ++ * ++ * Board setup for the Linksys WRT300N v2 ++ * ++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> ++ * ++ * based on coyote-setup.c: ++ * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * ++ * Author: Imre Kaloz <Kaloz@openwrt.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/serial.h> ++#include <linux/tty.h> ++#include <linux/serial_8250.h> ++#include <linux/slab.h> ++ ++#include <asm/types.h> ++#include <asm/setup.h> ++#include <asm/memory.h> ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data wrt300nv2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource wrt300nv2_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device wrt300nv2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &wrt300nv2_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &wrt300nv2_flash_resource, ++}; ++ ++static struct resource wrt300nv2_uart_resource = { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct plat_serial8250_port wrt300nv2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { }, ++}; ++ ++static struct platform_device wrt300nv2_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev = { ++ .platform_data = wrt300nv2_uart_data, ++ }, ++ .num_resources = 1, ++ .resource = &wrt300nv2_uart_resource, ++}; ++ ++static struct platform_device *wrt300nv2_devices[] __initdata = { ++ &wrt300nv2_flash, ++ &wrt300nv2_uart ++}; ++ ++static void __init wrt300nv2_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; ++ ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ ++ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices)); ++} ++ ++#ifdef CONFIG_MACH_WRT300NV2 ++MACHINE_START(WRT300NV2, "Linksys WRT300N v2") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = wrt300nv2_init, ++MACHINE_END ++#endif +diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h +--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-05-03 23:17:48.000000000 +0200 ++++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-24 14:25:02.000000000 +0200 +@@ -40,7 +40,7 @@ + /* + * Some boards are using UART2 as console + */ +- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro()) ++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro() || machine_is_wrt300nv2()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch b/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch new file mode 100644 index 0000000..145ad76 --- /dev/null +++ b/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch @@ -0,0 +1,62 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:25:02.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:31:09.000000000 +0200 +@@ -76,9 +76,57 @@ + .resource = &wrt300nv2_uart_resource, + }; + ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = -1, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 1, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *wrt300nv2_devices[] __initdata = { + &wrt300nv2_flash, +- &wrt300nv2_uart ++ &wrt300nv2_uart, ++ &mac0, ++ &mac1, + }; + + static void __init wrt300nv2_init(void) diff --git a/target/linux/ixp4xx/patches/720-avila_setup_mac.patch b/target/linux/ixp4xx/patches/720-avila_setup_mac.patch new file mode 100644 index 0000000..3784852 --- /dev/null +++ b/target/linux/ixp4xx/patches/720-avila_setup_mac.patch @@ -0,0 +1,70 @@ +--- + arch/arm/mach-ixp4xx/avila-setup.c | 50 ++++++++++++++++++++++++++++++++++++- + 1 file changed, 49 insertions(+), 1 deletion(-) + +Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c ++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c +@@ -104,10 +104,60 @@ static struct platform_device avila_uart + .resource = avila_uart_resources + }; + ++/* MACs */ ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 0, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 1, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ + static struct platform_device *avila_devices[] __initdata = { + &avila_i2c_controller, + &avila_flash, +- &avila_uart ++ &avila_uart, ++ &mac0, ++ &mac1, ++ + }; + + static void __init avila_init(void) diff --git a/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch b/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch new file mode 100644 index 0000000..952a055 --- /dev/null +++ b/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch @@ -0,0 +1,50 @@ +Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c +=================================================================== +--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:36.000000000 -0800 ++++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:47.000000000 -0800 +@@ -18,6 +18,10 @@ + #include <linux/tty.h> + #include <linux/serial_8250.h> + #include <linux/slab.h> ++#ifdef CONFIG_SENSORS_EEPROM ++#include <linux/i2c.h> ++#include <linux/eeprom.h> ++#endif + + #include <asm/types.h> + #include <asm/setup.h> +@@ -198,9 +202,34 @@ + &avila_npe_ucode, + }; + ++#ifdef CONFIG_SENSORS_EEPROM ++static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t) ++{ ++ struct eeprom_data *data = t; ++ ++ char macs[12]; ++ ++ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */ ++ if (event == EEPROM_REGISTER && data->client.addr == 0x51) { ++ data->attr->read(&data->client.dev.kobj, macs, 0, 12); ++ memcpy(&plat_mac0.hwaddr, macs, 6); ++ memcpy(&plat_mac1.hwaddr, macs + 6, 6); ++ } ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block loft_eeprom_notifier = { ++ .notifier_call = loft_eeprom_do ++}; ++#endif ++ + static void __init avila_init(void) + { + ixp4xx_sys_init(); ++#ifdef CONFIG_SENSORS_EEPROM ++ register_eeprom_notifier(&loft_eeprom_notifier); ++#endif + + avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + avila_flash_resource.end = diff --git a/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch b/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch new file mode 100644 index 0000000..0ecd3a5 --- /dev/null +++ b/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch @@ -0,0 +1,28 @@ +diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c +--- linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:30:54.000000000 +0200 ++++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:33:08.000000000 +0200 +@@ -155,13 +155,23 @@ + .resource = &res_mac1, + }; + ++struct npe_ucode_platform_data avila_npe_ucode_data = { ++ .mtd_partition = "RedBoot", ++}; ++ ++static struct platform_device avila_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &avila_npe_ucode_data, ++}; ++ + static struct platform_device *avila_devices[] __initdata = { + &avila_i2c_controller, + &avila_flash, + &avila_uart, + &mac0, + &mac1, +- ++ &avila_npe_ucode, + }; + + #ifdef CONFIG_SENSORS_EEPROM diff --git a/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch new file mode 100644 index 0000000..79a0971 --- /dev/null +++ b/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch @@ -0,0 +1,201 @@ +Add EEPROM notifiers + +These help board level code by allowing a callback when EEPROMs are +loaded, this permits system level configuration to be loaded from the +EEPROM. This is particularly useful when the ethernet MAC ids are +stored in EEPROM and when the ethernet hardware is generic (so it +has no board level knowledge), then the MACs can be loaded into +the 'maclist' code and read out by the ethernet config. + +Signed-off-by: John Bowler <jbowler@acm.org> + +Index: linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c +=================================================================== +--- linux-2.6.21-rc1-arm.orig/drivers/i2c/chips/eeprom.c 2007-02-21 02:24:14.000000000 -0800 ++++ linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c 2007-02-21 02:25:01.000000000 -0800 +@@ -33,6 +33,8 @@ + #include <linux/jiffies.h> + #include <linux/i2c.h> + #include <linux/mutex.h> ++#include <linux/notifier.h> ++#include <linux/eeprom.h> + + /* Addresses to scan */ + static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, +@@ -41,26 +43,7 @@ + /* Insmod parameters */ + I2C_CLIENT_INSMOD_1(eeprom); + +- +-/* Size of EEPROM in bytes */ +-#define EEPROM_SIZE 256 +- +-/* possible types of eeprom devices */ +-enum eeprom_nature { +- UNKNOWN, +- VAIO, +-}; +- +-/* Each client has this additional data */ +-struct eeprom_data { +- struct i2c_client client; +- struct mutex update_lock; +- u8 valid; /* bitfield, bit!=0 if slice is valid */ +- unsigned long last_updated[8]; /* In jiffies, 8 slices */ +- u8 data[EEPROM_SIZE]; /* Register values */ +- enum eeprom_nature nature; +-}; +- ++ATOMIC_NOTIFIER_HEAD(eeprom_chain); + + static int eeprom_attach_adapter(struct i2c_adapter *adapter); + static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind); +@@ -189,6 +172,7 @@ + data->valid = 0; + mutex_init(&data->update_lock); + data->nature = UNKNOWN; ++ data->attr = &eeprom_attr; + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) +@@ -212,6 +196,9 @@ + if (err) + goto exit_detach; + ++ /* call the notifier chain */ ++ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data); ++ + return 0; + + exit_detach: +@@ -237,6 +224,41 @@ + return 0; + } + ++/** ++ * register_eeprom_notifier - register a 'user' of EEPROM devices. ++ * @nb: pointer to notifier info structure ++ * ++ * Registers a callback function to be called upon detection ++ * of an EEPROM device. Detection invokes the 'add' callback ++ * with the kobj of the mutex and a bin_attribute which allows ++ * read from the EEPROM. The intention is that the notifier ++ * will be able to read system configuration from the notifier. ++ * ++ * Only EEPROMs detected *after* the addition of the notifier ++ * are notified. I.e. EEPROMs already known to the system ++ * will not be notified - add the notifier from board level ++ * code! ++ */ ++int register_eeprom_notifier(struct notifier_block *nb) ++{ ++ return atomic_notifier_chain_register(&eeprom_chain, nb); ++} ++ ++/** ++ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices. ++ * @old: pointer to notifier info structure ++ * ++ * Removes a callback function from the list of 'users' to be ++ * notified upon detection of EEPROM devices. ++ */ ++int unregister_eeprom_notifier(struct notifier_block *nb) ++{ ++ return atomic_notifier_chain_unregister(&eeprom_chain, nb); ++} ++ ++EXPORT_SYMBOL_GPL(register_eeprom_notifier); ++EXPORT_SYMBOL_GPL(unregister_eeprom_notifier); ++ + static int __init eeprom_init(void) + { + return i2c_add_driver(&eeprom_driver); +Index: linux-2.6.21-rc1-arm/include/linux/eeprom.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.21-rc1-arm/include/linux/eeprom.h 2007-02-21 02:25:01.000000000 -0800 +@@ -0,0 +1,71 @@ ++#ifndef _LINUX_EEPROM_H ++#define _LINUX_EEPROM_H ++/* ++ * $Id: 45-eeprom-new-notifier.patch,v 1.2 2006/03/27 11:10:19 azummo Exp $ ++ * ++ * Copyright (C) 2006 John Bowler ++ */ ++ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __KERNEL__ ++#error This is a kernel header ++#endif ++ ++#include <linux/list.h> ++#include <linux/kobject.h> ++#include <linux/sysfs.h> ++ ++/* Size of EEPROM in bytes */ ++#define EEPROM_SIZE 256 ++ ++/* possible types of eeprom devices */ ++enum eeprom_nature { ++ UNKNOWN, ++ VAIO, ++}; ++ ++/* Each client has this additional data */ ++struct eeprom_data { ++ struct i2c_client client; ++ struct mutex update_lock; ++ u8 valid; /* bitfield, bit!=0 if slice is valid */ ++ unsigned long last_updated[8]; /* In jiffies, 8 slices */ ++ u8 data[EEPROM_SIZE]; /* Register values */ ++ enum eeprom_nature nature; ++ struct bin_attribute *attr; ++}; ++ ++/* ++ * This is very basic. ++ * ++ * If an EEPROM is detected on the I2C bus (this only works for ++ * I2C EEPROMs) the notifier chain is called with ++ * both the I2C information and the kobject for the sysfs ++ * device which has been registers. It is then possible to ++ * read from the device via the bin_attribute::read method ++ * to extract configuration information. ++ * ++ * Register the notifier in the board level code, there is no ++ * need to unregister it but you can if you want (it will save ++ * a little bit or kernel memory to do so). ++ */ ++ ++extern int register_eeprom_notifier(struct notifier_block *nb); ++extern int unregister_eeprom_notifier(struct notifier_block *nb); ++ ++#endif /* _LINUX_EEPROM_H */ +Index: linux-2.6.21-rc1-arm/include/linux/notifier.h +=================================================================== +--- linux-2.6.21-rc1-arm.orig/include/linux/notifier.h 2007-02-21 02:24:14.000000000 -0800 ++++ linux-2.6.21-rc1-arm/include/linux/notifier.h 2007-02-21 02:25:01.000000000 -0800 +@@ -187,5 +187,8 @@ + #define CPU_DOWN_FAILED 0x0006 /* CPU (unsigned)v NOT going down */ + #define CPU_DEAD 0x0007 /* CPU (unsigned)v dead */ + ++/* eeprom notifier chain */ ++#define EEPROM_REGISTER 0x0001 ++ + #endif /* __KERNEL__ */ + #endif /* _LINUX_NOTIFIER_H */ diff --git a/target/linux/ixp4xx/patches/900-no_loader_workaround.patch b/target/linux/ixp4xx/patches/900-no_loader_workaround.patch new file mode 100644 index 0000000..f84f15b --- /dev/null +++ b/target/linux/ixp4xx/patches/900-no_loader_workaround.patch @@ -0,0 +1,19 @@ +diff -Nur linux-2.6.19/arch/arm/boot/compressed/head-xscale.S linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S +--- linux-2.6.19/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:56:21.000000000 +0100 ++++ linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:58:15.000000000 +0100 +@@ -41,6 +41,7 @@ + mov r7, #MACH_TYPE_COTULLA_IDP + #endif + ++/* let the arm-magic.sh script do the dirty work + #ifdef CONFIG_MACH_GTWX5715 + mov r7, #(MACH_TYPE_GTWX5715 & 0xff) + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) +@@ -50,6 +51,7 @@ + mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) + orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) + #endif ++ */ + + #ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 diff --git a/target/linux/ixp4xx/patches/996-fsg3_support.patch b/target/linux/ixp4xx/patches/996-fsg3_support.patch new file mode 100644 index 0000000..ecf5d75 --- /dev/null +++ b/target/linux/ixp4xx/patches/996-fsg3_support.patch @@ -0,0 +1,429 @@ +Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c +=================================================================== +--- /dev/null ++++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c +@@ -0,0 +1,71 @@ ++/* ++ * arch/arch/mach-ixp4xx/fsg-pci.c ++ * ++ * FSG board-level PCI initialization ++ * ++ * Author: Rod Whitby <rod@whitby.id.au> ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++ ++#include <asm/mach/pci.h> ++#include <asm/mach-types.h> ++ ++void __init fsg_pci_preinit(void) ++{ ++ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); ++ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); ++ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[FSG_PCI_IRQ_LINES] = { ++ IRQ_FSG_PCI_INTC, ++ IRQ_FSG_PCI_INTB, ++ IRQ_FSG_PCI_INTA, ++ }; ++ ++ int irq = -1; ++ slot = slot - 11; ++ ++ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && ++ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) { ++ irq = pci_irq_table[(slot - 1)]; ++ } ++ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq); ++ ++ return irq; ++} ++ ++struct hw_pci fsg_pci __initdata = { ++ .nr_controllers = 1, ++ .preinit = fsg_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = fsg_map_irq, ++}; ++ ++int __init fsg_pci_init(void) ++{ ++ if (machine_is_fsg()) ++ pci_common_init(&fsg_pci); ++ return 0; ++} ++ ++subsys_initcall(fsg_pci_init); +Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c +=================================================================== +--- /dev/null ++++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c +@@ -0,0 +1,223 @@ ++/* ++ * arch/arm/mach-ixp4xx/fsg-setup.c ++ * ++ * FSG board-setup ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Rod Whitby <rod@whitby.id.au> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/serial.h> ++#include <linux/serial_8250.h> ++#include <linux/leds.h> ++#include <linux/mtd/mtd.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/flash.h> ++ ++static struct flash_platform_data fsg_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource fsg_flash_resource = { ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device fsg_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev.platform_data = &fsg_flash_data, ++ .num_resources = 1, ++ .resource = &fsg_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins fsg_i2c_gpio_pins = { ++ .sda_pin = FSG_SDA_PIN, ++ .scl_pin = FSG_SCL_PIN, ++}; ++ ++static struct platform_device fsg_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev.platform_data = &fsg_i2c_gpio_pins, ++ .num_resources = 0, ++}; ++ ++static struct resource fsg_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct plat_serial8250_port fsg_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { } ++}; ++ ++static struct platform_device fsg_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = fsg_uart_data, ++ .num_resources = ARRAY_SIZE(fsg_uart_resources), ++ .resource = fsg_uart_resources, ++}; ++ ++/* Built-in 10/100 Ethernet MAC interfaces */ ++static struct resource res_mac0 = { ++ .start = IXP4XX_EthB_BASE_PHYS, ++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource res_mac1 = { ++ .start = IXP4XX_EthC_BASE_PHYS, ++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct mac_plat_info plat_mac0 = { ++ .npe_id = 1, ++ .phy_id = 5, ++ .eth_id = 0, ++ .rxq_id = 27, ++ .txq_id = 24, ++ .rxdoneq_id = 4, ++}; ++ ++static struct mac_plat_info plat_mac1 = { ++ .npe_id = 2, ++ .phy_id = 4, ++ .eth_id = 1, ++ .rxq_id = 28, ++ .txq_id = 25, ++ .rxdoneq_id = 5, ++}; ++ ++static struct platform_device mac0 = { ++ .name = "ixp4xx_mac", ++ .id = 0, ++ .dev.platform_data = &plat_mac0, ++ .num_resources = 1, ++ .resource = &res_mac0, ++}; ++ ++static struct platform_device mac1 = { ++ .name = "ixp4xx_mac", ++ .id = 1, ++ .dev.platform_data = &plat_mac1, ++ .num_resources = 1, ++ .resource = &res_mac1, ++}; ++ ++struct npe_ucode_platform_data fsg_npe_ucode_data = { ++ .mtd_partition = "microcode", ++}; ++ ++static struct platform_device fsg_npe_ucode = { ++ .name = "ixp4xx_npe_ucode", ++ .id = 0, ++ .dev.platform_data = &fsg_npe_ucode_data, ++}; ++ ++static struct platform_device *fsg_devices[] __initdata = { ++ &fsg_i2c_controller, ++ &fsg_flash, ++ &mac0, ++ &mac1, ++ &fsg_npe_ucode, ++}; ++ ++static void fsg_flash_add(struct mtd_info *mtd) ++{ ++ if (strcmp(mtd->name, "RedBoot config") == 0) { ++ size_t retlen; ++ u_char mac[6]; ++ ++ if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) { ++ printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ memcpy(plat_mac0.hwaddr, mac, 6); ++ mac[5]++; ++ printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ memcpy(plat_mac1.hwaddr, mac, 6); ++ } else { ++ printk(KERN_ERR "fsg mac: read failed\n"); ++ } ++ } ++} ++ ++static void fsg_flash_remove(struct mtd_info *mtd) { ++} ++ ++static struct mtd_notifier fsg_flash_notifier = { ++ .add = fsg_flash_add, ++ .remove = fsg_flash_remove, ++}; ++ ++static void __init fsg_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); ++ fsg_flash_resource.end = ++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; ++ ++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; ++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; ++ ++ /* Configure CS2 for operation, 8bit and writable */ ++ *IXP4XX_EXP_CS2 = 0xbfff0002; ++ ++ /* This is only useful on a modified machine, but it is valuable ++ * to have it first in order to see debug messages, and so that ++ * it does *not* get removed if platform_add_devices fails! ++ */ ++ (void)platform_device_register(&fsg_uart); ++ ++ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); ++ ++ register_mtd_user(&fsg_flash_notifier); ++} ++ ++MACHINE_START(FSG, "Freecom FSG-3") ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .boot_params = 0x0100, ++ .init_machine = fsg_init, ++MACHINE_END ++ +Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h +=================================================================== +--- /dev/null ++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h +@@ -0,0 +1,58 @@ ++/* ++ * include/asm-arm/arch-ixp4xx/fsg.h ++ * ++ * Freecom FSG-3 platform specific definitions ++ * ++ * Author: Rod Whitby <rod@whitby.id.au> ++ * Author: Tomasz Chmielewski <mangoo@wpkg.org> ++ * Maintainers: http://www.nslu2-linux.org ++ * ++ * Based on coyote.h by ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include <asm/hardware.h>" ++#endif ++ ++#define FSG_SDA_PIN 12 ++#define FSG_SCL_PIN 13 ++ ++/* ++ * FSG PCI IRQs ++ */ ++#define FSG_PCI_MAX_DEV 3 ++#define FSG_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define FSG_PCI_INTA_PIN 6 ++#define FSG_PCI_INTB_PIN 7 ++#define FSG_PCI_INTC_PIN 5 ++ ++/* Buttons */ ++ ++#define FSG_SB_GPIO 4 ++#define FSG_RB_GPIO 9 ++#define FSG_UB_GPIO 10 ++ ++#define FSG_SB_IRQ IRQ_IXP4XX_GPIO4 ++#define FSG_RB_IRQ IRQ_IXP4XX_GPIO9 ++#define FSG_UB_IRQ IRQ_IXP4XX_GPIO10 ++ ++#define FSG_SB_BM (1L << FSG_SB_GPIO) ++#define FSG_RB_BM (1L << FSG_RB_GPIO) ++#define FSG_UB_BM (1L << FSG_UB_GPIO) ++ ++/* LEDs */ ++ ++#define FSG_LED_RING_BIT 0 ++#define FSG_LED_SYNC_BIT 1 ++#define FSG_LED_USB_BIT 2 ++#define FSG_LED_SATA_BIT 3 ++#define FSG_LED_WAN_BIT 4 ++#define FSG_LED_WLAN_BIT 5 +Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h +=================================================================== +--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h ++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h +@@ -48,5 +48,6 @@ extern unsigned int processor_id; + #include "nslu2.h" + #include "nas100d.h" + #include "dsmg600.h" ++#include "fsg.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h +=================================================================== +--- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h ++++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h +@@ -128,4 +128,11 @@ + #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 + #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 + ++/* ++ * Freecom FSG-3 board IRQs ++ */ ++#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 ++#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 ++#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 ++ + #endif +--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile~ 2007-07-11 22:20:52.000000000 +0930 ++++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile 2007-07-11 22:22:02.000000000 +0930 +@@ -13,6 +13,7 @@ + obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o + obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o + obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o ++obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o + obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o + obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o + obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o +@@ -29,6 +30,7 @@ + obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o + obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o + obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o ++obj-$(CONFIG_MACH_FSG) += fsg-setup.o + obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o + obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o + obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o +--- linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig~ 2007-07-11 22:23:24.000000000 +0930 ++++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig 2007-07-11 22:23:47.000000000 +0930 +@@ -138,6 +138,14 @@ + DSM-G600 RevA device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/DSMG600/HomePage + ++config MACH_FSG ++ bool ++ prompt "Freecom FSG-3" ++ help ++ Say 'Y' here if you want your kernel to support Freecom's ++ FSG-3 device. For more information on this ++ platform see http://www.openfsg.com/ ++ + # + # Avila and IXDP share the same source for now. Will change in future + # diff --git a/target/linux/ixp4xx/profiles/100-Default.mk b/target/linux/ixp4xx/profiles/100-Default.mk new file mode 100644 index 0000000..104268b --- /dev/null +++ b/target/linux/ixp4xx/profiles/100-Default.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Default + NAME:=Default Profile + PACKAGES:=kmod-madwifi +endef + +define Profile/Default/Description + Default IXP4xx Profile +endef +$(eval $(call Profile,Default)) + diff --git a/target/linux/ixp4xx/profiles/200-NSLU2.mk b/target/linux/ixp4xx/profiles/200-NSLU2.mk new file mode 100644 index 0000000..a4e1a30 --- /dev/null +++ b/target/linux/ixp4xx/profiles/200-NSLU2.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/NSLU2 + NAME:=Linksys NSLU2 + PACKAGES:=kmod-ixp4xx-npe \ + kmod-scsi-core \ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-storage \ + kmod-fs-ext2 kmod-fs-ext3 +endef + +define Profile/NSLU2/Description + Package set optimized for the Linksys NSLU2 +endef +$(eval $(call Profile,NSLU2)) + diff --git a/target/linux/ixp4xx/profiles/300-NAS100d.mk b/target/linux/ixp4xx/profiles/300-NAS100d.mk new file mode 100644 index 0000000..f72128e --- /dev/null +++ b/target/linux/ixp4xx/profiles/300-NAS100d.mk @@ -0,0 +1,21 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/NAS100d + NAME:=Iomega NAS 100d + PACKAGES:=kmod-ixp4xx-npe \ + kmod-madwifi wireless-tools \ + kmod-scsi-core kmod-libata kmod-pata-artop \ + kmod-usb-core kmod-usb2 kmod-usb-storage \ + kmod-fs-ext2 kmod-fs-ext3 +endef + +define Profile/NAS100d/Description + Package set optimized for the Iomega NAS 100d +endef +$(eval $(call Profile,NAS100d)) + diff --git a/target/linux/ixp4xx/profiles/400-DSMG600RevA.mk b/target/linux/ixp4xx/profiles/400-DSMG600RevA.mk new file mode 100644 index 0000000..4eec1c5 --- /dev/null +++ b/target/linux/ixp4xx/profiles/400-DSMG600RevA.mk @@ -0,0 +1,21 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/DSMG600RevA + NAME:=DSM-G600 Rev A + PACKAGES:=kmod-via-velocity \ + kmod-madwifi wireless-tools \ + kmod-scsi-core kmod-libata kmod-pata-artop \ + kmod-usb-core kmod-usb-uhci kmod-usb2 kmod-usb-storage \ + kmod-fs-ext2 kmod-fs-ext3 +endef + +define Profile/DSMG600RevA/Description + Package set optimized for the DSM-G600 Rev A +endef +$(eval $(call Profile,DSMG600RevA)) + diff --git a/target/linux/ixp4xx/profiles/500-FSG3.mk b/target/linux/ixp4xx/profiles/500-FSG3.mk new file mode 100644 index 0000000..d7d6a2e --- /dev/null +++ b/target/linux/ixp4xx/profiles/500-FSG3.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/FSG3 + NAME:=Freecom FSG-3 + PACKAGES:= \ + kmod-madwifi wireless-tools \ + kmod-usb-core kmod-usb-uhci kmod-usb2 kmod-usb-storage \ + kmod-fs-ext2 +endef + +define Profile/FSG3/Description + Package set optimized for the Freecom FSG-3 +endef +$(eval $(call Profile,FSG3)) + |