summaryrefslogtreecommitdiff
path: root/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch')
-rw-r--r--target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch127
1 files changed, 0 insertions, 127 deletions
diff --git a/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch
deleted file mode 100644
index 44b4c52..0000000
--- a/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch
+++ /dev/null
@@ -1,127 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
- kirkwood-nsa310a.dtb \
- kirkwood-openblocks_a6.dtb \
- kirkwood-openblocks_a7.dtb \
-+ kirkwood-pogo_e02.dtb \
- kirkwood-sheevaplug.dtb \
- kirkwood-sheevaplug-esata.dtb \
- kirkwood-topkick.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -0,0 +1,114 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Cloud Engines Pogoplug E02";
-+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x10000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pinctrl@10000 {
-+ pmx_usb_power_enable: pmx-usb-power-enable {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_green: pmx-led_green {
-+ marvell,pins = "mpp48";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_orange: pmx-led_orange {
-+ marvell,pins = "mpp49";
-+ marvell,function = "gpio";
-+ };
-+ };
-+ serial@12000 {
-+ status = "ok";
-+ };
-+ };
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-+ &pmx_led_green >;
-+ pinctrl-names = "default";
-+
-+ health {
-+ label = "status:green:health";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+ fault {
-+ label = "status:orange:fault";
-+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_usb_power_enable>;
-+ pinctrl-names = "default";
-+
-+ usb_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&nand {
-+ chip-delay = <40>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "uImage";
-+ reg = <0x0100000 0x400000>;
-+ };
-+
-+ partition@500000 {
-+ label = "pogoplug";
-+ reg = <0x0500000 0x2000000>;
-+ };
-+
-+ partition@2500000 {
-+ label = "root";
-+ reg = <0x02500000 0x5b00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};