diff options
Diffstat (limited to 'target/linux/kirkwood/patches-4.4/194-nsa325.patch')
| -rw-r--r-- | target/linux/kirkwood/patches-4.4/194-nsa325.patch | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/target/linux/kirkwood/patches-4.4/194-nsa325.patch b/target/linux/kirkwood/patches-4.4/194-nsa325.patch deleted file mode 100644 index e187374..0000000 --- a/target/linux/kirkwood/patches-4.4/194-nsa325.patch +++ /dev/null @@ -1,233 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -205,6 +205,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-nsa310a.dtb \ - kirkwood-nsa310b.dtb \ - kirkwood-nsa310s.dtb \ -+ kirkwood-nsa325.dtb \ - kirkwood-openblocks_a6.dtb \ - kirkwood-openblocks_a7.dtb \ - kirkwood-openrd-base.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts -@@ -0,0 +1,220 @@ -+/* -+ * Device tree file for Zyxel NSA325 and NSA325v2 NAS -+ */ -+/dts-v1/; -+#include "kirkwood-nsa3x0-common.dtsi" -+ -+/ { -+ model = "ZyXEL NSA325"; -+ compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart0; -+ }; -+ -+ mbus { -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ ocp@f1000000 { -+ pinctrl: pin-controller@10000 { -+ pinctrl-names = "default"; -+ -+ pmx_led_sata2_green: pmx-led-sata2-green { -+ marvell,pins = "mpp12"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sata2_red: pmx-led-sata2-red { -+ marvell,pins = "mpp13"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_mcu_data: pmx-mcu-data { -+ marvell,pins = "mpp14"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_usb_green: pmx-led-usb-green { -+ marvell,pins = "mpp15"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_mcu_clk: pmx-mcu-clk { -+ marvell,pins = "mpp16"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_mcu_act: pmx-mcu-act { -+ marvell,pins = "mpp17"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_usb_power_off: pmx-usb-power-off { -+ marvell,pins = "mpp21"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sys_green: pmx-led-sys-green { -+ marvell,pins = "mpp28"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sys_orange: pmx-led-sys-orange { -+ marvell,pins = "mpp29"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sata1_green: pmx-led-sata1-green { -+ marvell,pins = "mpp41"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sata1_red: pmx-led-sata1-red { -+ marvell,pins = "mpp42"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_beeper: pmx-beeper { -+ marvell,pins = "mpp44"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_pwr_sata1: pmx-pwr-sata1 { -+ marvell,pins = "mpp47"; -+ marvell,function = "gpio"; -+ }; -+ -+ }; -+ -+ /* This board uses the pcf8563 RTC instead of the SoC RTC */ -+ rtc@10300 { -+ status = "disabled"; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ }; -+ }; -+ -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&pmx_led_sata1_green &pmx_led_sata1_red -+ &pmx_led_sata2_green &pmx_led_sata2_red -+ &pmx_led_sys_green &pmx_led_sys_orange -+ &pmx_led_copy_green &pmx_led_copy_red -+ &pmx_led_usb_green>; -+ pinctrl-names = "default"; -+ -+ green-sata2 { -+ label = "nsa325:green:sata2"; -+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ red-sata2 { -+ label = "nsa325:red:sata2"; -+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green-usb { -+ label = "nsa325:green:usb"; -+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green-sys { -+ label = "nsa325:green:sys"; -+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ orange-sys { -+ label = "nsa325:orange:sys"; -+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green-copy { -+ label = "nsa325:green:copy"; -+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ red-copy { -+ label = "nsa325:red:copy"; -+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ green-sata1 { -+ label = "nsa325:green:sata1"; -+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ red-sata1 { -+ label = "nsa325:red:sata1"; -+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&pmx_usb_power_off &pmx_pwr_sata1>; -+ pinctrl-names = "default"; -+ -+ usb_power: regulator@1 { -+ compatible = "regulator-fixed"; -+ reg = <1>; -+ regulator-name = "USB Power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ sata1_power: regulator@2 { -+ compatible = "regulator-fixed"; -+ reg = <2>; -+ regulator-name = "SATA Power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphy0: ethernet-phy@1 { -+ reg = <1>; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+ -+ ethernet0-port@0 { -+ phy-handle = <ðphy0>; -+ }; -+}; |