1 files changed, 0 insertions, 173 deletions
diff --git a/target/linux/kirkwood/patches-4.4/195-on100.patch b/target/linux/kirkwood/patches-4.4/195-on100.patch
deleted file mode 100644
index 8c66f2d..0000000
--- a/target/linux/kirkwood/patches-4.4/195-on100.patch
+++ /dev/null
@@ -1,173 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,160 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Cisco Systems ON100";
-+	compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x20000000>;
-+	};
-+
-+	aliases {
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+ 	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_btn_reset>;
-+		pinctrl-names = "default";
-+
-+		button@1 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
-+		pinctrl-names = "default";
-+
-+		health-g {
-+			label = "on100:green:health";
-+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health-r {
-+			label = "on100:red:health";
-+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health2-g {
-+			label = "on100:green:health2";
-+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		health2-r {
-+			label = "on100:red:health2";
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+
-+	ethernet1-port@0 {
-+		phy-handle = <&ethphy1>;
-+		phy-connection-type = "rgmii-id";
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		/* Marvell 88E1121R */
-+		compatible = "ethernet-phy-id0141.0cb0",
-+			     "ethernet-phy-ieee802.3-c22";
-+		reg = <0>;
-+	};
-+
-+	ethphy1: ethernet-phy@1 {
-+		/* Marvell 88E1121R */
-+		compatible = "ethernet-phy-id0141.0cb0",
-+			     "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x00000000 0x000a0000>;
-+		read-only;
-+	};
-+
-+	partition@a0000 {
-+		label = "u-boot environment";
-+		reg = <0x000a0000 0x00020000>;
-+		read-only;
-+	};
-+
-+	partition@c0000 {
-+		label = "kernel";
-+		reg = <0x000c0000 0x00540000>;
-+	};
-+
-+	partition@600000 {
-+		label = "ubi";
-+		reg = <0x00600000 0x1fa00000>;
-+	};
-+};
-+
-+&pinctrl {
-+	pmx_led_health_r: pmx-led-health-r {
-+		marvell,pins = "mpp45";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health_g: pmx-led-health-g {
-+		marvell,pins = "mpp44";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health2_r: pmx-led-health2-r {
-+		marvell,pins = "mpp47";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_led_health2_g: pmx-led-health2-g {
-+		marvell,pins = "mpp46";
-+		marvell,function = "gpio";
-+	};
-+
-+	pmx_btn_reset: pmx-led-reset {
-+		marvell,pins = "mpp31";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&sdio {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -206,6 +206,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-nsa310b.dtb \
- 	kirkwood-nsa310s.dtb \
- 	kirkwood-nsa325.dtb \
-+	kirkwood-on100.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \