diff options
Diffstat (limited to 'target/linux/kirkwood/patches/004-cpuidle.patch')
| -rw-r--r-- | target/linux/kirkwood/patches/004-cpuidle.patch | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches/004-cpuidle.patch b/target/linux/kirkwood/patches/004-cpuidle.patch new file mode 100644 index 0000000..876fe89 --- /dev/null +++ b/target/linux/kirkwood/patches/004-cpuidle.patch @@ -0,0 +1,146 @@ +From: Rabeeh Khoury <rabeeh@marvell.com> +Date: Tue, 24 Mar 2009 14:10:15 +0000 (+0200) +Subject: [ARM] Kirkwood: CPU idle driver +X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=039b97666e1335eac517c7d35a0fa1143af689f0;hp=56a50adda49b2020156616c4eb15353e0f9ad7de + +[ARM] Kirkwood: CPU idle driver + +The patch adds support for Kirkwood cpu idle. +Two idle states are defined: +1. Wait-for-interrupt (replacing default kirkwood wfi) +2. Wait-for-interrupt and DDR self refresh + +Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> +Signed-off-by: Nicolas Pitre <nico@marvell.com> +--- + +--- a/arch/arm/configs/kirkwood_defconfig ++++ b/arch/arm/configs/kirkwood_defconfig +@@ -270,7 +270,9 @@ CONFIG_CMDLINE="" + # + # CPU Power Management + # +-# CONFIG_CPU_IDLE is not set ++CONFIG_CPU_IDLE=y ++CONFIG_CPU_IDLE_GOV_LADDER=y ++CONFIG_CPU_IDLE_GOV_MENU=y + + # + # Floating point emulation +--- a/arch/arm/mach-kirkwood/Makefile ++++ b/arch/arm/mach-kirkwood/Makefile +@@ -5,3 +5,5 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88 + obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o + obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o + obj-$(CONFIG_MACH_TS219) += ts219-setup.o ++ ++obj-$(CONFIG_CPU_IDLE) += cpuidle.o +--- /dev/null ++++ b/arch/arm/mach-kirkwood/cpuidle.c +@@ -0,0 +1,96 @@ ++/* ++ * arch/arm/mach-kirkwood/cpuidle.c ++ * ++ * CPU idle Marvell Kirkwood SoCs ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ * ++ * The cpu idle uses wait-for-interrupt and DDR self refresh in order ++ * to implement two idle states - ++ * #1 wait-for-interrupt ++ * #2 wait-for-interrupt and DDR self refresh ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/cpuidle.h> ++#include <asm/io.h> ++#include <asm/proc-fns.h> ++#include <mach/kirkwood.h> ++ ++#define KIRKWOOD_MAX_STATES 2 ++ ++static struct cpuidle_driver kirkwood_idle_driver = { ++ .name = "kirkwood_idle", ++ .owner = THIS_MODULE, ++}; ++ ++static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); ++ ++/* Actual code that puts the SoC in different idle states */ ++static int kirkwood_enter_idle(struct cpuidle_device *dev, ++ struct cpuidle_state *state) ++{ ++ struct timeval before, after; ++ int idle_time; ++ ++ local_irq_disable(); ++ do_gettimeofday(&before); ++ if (state == &dev->states[0]) ++ /* Wait for interrupt state */ ++ cpu_do_idle(); ++ else if (state == &dev->states[1]) { ++ /* ++ * Following write will put DDR in self refresh. ++ * Note that we have 256 cycles before DDR puts it ++ * self in self-refresh, so the wait-for-interrupt ++ * call afterwards won't get the DDR from self refresh ++ * mode. ++ */ ++ writel(0x7, DDR_OPERATION_BASE); ++ cpu_do_idle(); ++ } ++ do_gettimeofday(&after); ++ local_irq_enable(); ++ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + ++ (after.tv_usec - before.tv_usec); ++ return idle_time; ++} ++ ++/* Initialize CPU idle by registering the idle states */ ++static int kirkwood_init_cpuidle(void) ++{ ++ struct cpuidle_device *device; ++ ++ cpuidle_register_driver(&kirkwood_idle_driver); ++ ++ device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); ++ device->state_count = KIRKWOOD_MAX_STATES; ++ ++ /* Wait for interrupt state */ ++ device->states[0].enter = kirkwood_enter_idle; ++ device->states[0].exit_latency = 1; ++ device->states[0].target_residency = 10000; ++ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; ++ strcpy(device->states[0].name, "WFI"); ++ strcpy(device->states[0].desc, "Wait for interrupt"); ++ ++ /* Wait for interrupt and DDR self refresh state */ ++ device->states[1].enter = kirkwood_enter_idle; ++ device->states[1].exit_latency = 10; ++ device->states[1].target_residency = 10000; ++ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; ++ strcpy(device->states[1].name, "DDR SR"); ++ strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); ++ ++ if (cpuidle_register_device(device)) { ++ printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); ++ return -EIO; ++ } ++ return 0; ++} ++ ++device_initcall(kirkwood_init_cpuidle); +--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h ++++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h +@@ -48,6 +48,7 @@ + */ + #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) + #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) ++#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) + + #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) + #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) |