diff options
Diffstat (limited to 'target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c')
-rw-r--r-- | target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c | 2870 |
1 files changed, 2870 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c new file mode 100644 index 0000000..ad6bc72 --- /dev/null +++ b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c @@ -0,0 +1,2870 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the implementation of the HCD. In Linux, the HCD + * implements the hc_driver API. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> + +#include <linux/device.h> + +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include <linux/dma-mapping.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +#include <asm/irq.h> +#include "dwc_otg_ifx.h" // for Infineon platform specific. +extern atomic_t release_later; + +static u64 dma_mask = DMA_BIT_MASK(32); + +static const char dwc_otg_hcd_name [] = "dwc_otg_hcd"; +static const struct hc_driver dwc_otg_hc_driver = +{ + .description = dwc_otg_hcd_name, + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(dwc_otg_hcd_t), + .irq = dwc_otg_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, + //.reset = + .start = dwc_otg_hcd_start, + //.suspend = + //.resume = + .stop = dwc_otg_hcd_stop, + .urb_enqueue = dwc_otg_hcd_urb_enqueue, + .urb_dequeue = dwc_otg_hcd_urb_dequeue, + .endpoint_disable = dwc_otg_hcd_endpoint_disable, + .get_frame_number = dwc_otg_hcd_get_frame_number, + .hub_status_data = dwc_otg_hcd_hub_status_data, + .hub_control = dwc_otg_hcd_hub_control, + //.hub_suspend = + //.hub_resume = +}; + + +/** + * Work queue function for starting the HCD when A-Cable is connected. + * The dwc_otg_hcd_start() must be called in a process context. + */ +static void hcd_start_func(struct work_struct *work) +{ + struct dwc_otg_hcd *priv = + container_of(work, struct dwc_otg_hcd, start_work); + struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p; + DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); + if (usb_hcd) { + dwc_otg_hcd_start(usb_hcd); + } +} + + +/** + * HCD Callback function for starting the HCD when A-Cable is + * connected. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_start_cb(void *_p) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + if (core_if->op_state == B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + ((struct usb_hcd *)_p)->self.is_b_host = 1; + } else { + ((struct usb_hcd *)_p)->self.is_b_host = 0; + } + /* Need to start the HCD in a non-interrupt context. */ + INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); + dwc_otg_hcd->_p = _p; + schedule_work(&dwc_otg_hcd->start_work); + return 1; +} + + +/** + * HCD Callback function for stopping the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_stop_cb( void *_p ) +{ + struct usb_hcd *usb_hcd = (struct usb_hcd *)_p; + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_stop( usb_hcd ); + return 1; +} +static void del_xfer_timers(dwc_otg_hcd_t *_hcd) +{ +#ifdef DEBUG + int i; + int num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + del_timer(&_hcd->core_if->hc_xfer_timer[i]); + } +#endif /* */ +} + +static void del_timers(dwc_otg_hcd_t *_hcd) +{ + del_xfer_timers(_hcd); + del_timer(&_hcd->conn_timer); +} + +/** + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + */ +static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd, + struct list_head *_qh_list) +{ + struct list_head *qh_item; + dwc_otg_qh_t *qh; + struct list_head *qtd_item; + dwc_otg_qtd_t *qtd; + + list_for_each(qh_item, _qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); + for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list; + qtd_item = qh->qtd_list.next) { + qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); + if (qtd->urb != NULL) { + dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT); + } + dwc_otg_hcd_qtd_remove_and_free(qtd); + } + } +} + +/** + * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + */ +static void kill_all_urbs(dwc_otg_hcd_t *_hcd) +{ + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_disconnect_cb( void *_p ) +{ + gintsts_data_t intr; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p); + + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + + /* + * Set status flags for the hub driver. + */ + dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr.d32 = 0; + intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; + intr.b.hcintr = 1; + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0); + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0); + + del_timers(dwc_otg_hcd); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { + if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { + hprt0_data_t hprt0 = { .d32=0 }; + DWC_PRINT("Disconnect: PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + } + + dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if ); + } + + /* Respond with an error status to all URBs in the schedule. */ + kill_all_urbs(dwc_otg_hcd); + + if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { + /* Clean up any host channels that were in use. */ + int num_channels; + int i; + dwc_hc_t *channel; + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + + if (!dwc_otg_hcd->core_if->dma_enable) { + /* Flush out any channel requests in slave mode. */ + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + /* Halt the channel. */ + hcchar.b.chdis = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel); + list_add_tail(&channel->hc_list_entry, + &dwc_otg_hcd->free_hc_list); + } + } + } + + /* A disconnect will end the session so the B-Device is no + * longer a B-host. */ + ((struct usb_hcd *)_p)->self.is_b_host = 0; + + return 1; +} + +/** + * Connection timeout function. An OTG host is required to display a + * message if the device does not connect within 10 seconds. + */ +void dwc_otg_hcd_connect_timeout( unsigned long _ptr ) +{ + DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr); + DWC_PRINT( "Connect Timeout\n"); + DWC_ERROR( "Device Not Connected/Responding\n" ); +} + +/** + * Start the connection timer. An OTG host is required to display a + * message if the device does not connect within 10 seconds. The + * timer is deleted if a port connect interrupt occurs before the + * timer expires. + */ +static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd) +{ + init_timer( &_hcd->conn_timer ); + _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; + _hcd->conn_timer.data = (unsigned long)0; + _hcd->conn_timer.expires = jiffies + (HZ*10); + add_timer( &_hcd->conn_timer ); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_session_start_cb( void *_p ) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p); + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_start_connect_timer( dwc_otg_hcd ); + return 1; +} + +/** + * HCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { + .start = dwc_otg_hcd_start_cb, + .stop = dwc_otg_hcd_stop_cb, + .disconnect = dwc_otg_hcd_disconnect_cb, + .session_start = dwc_otg_hcd_session_start_cb, + .p = 0, +}; + + +/** + * Reset tasklet function + */ +static void reset_tasklet_func (unsigned long data) +{ + dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data; + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + + DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); + + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay (60); + + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + dwc_otg_hcd->flags.b.port_reset_change = 1; + + return; +} + +static struct tasklet_struct reset_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = reset_tasklet_func, + .data = 0, +}; + +/** + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd); + +int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device) +{ + struct usb_hcd *hcd = NULL; + dwc_otg_hcd_t *dwc_otg_hcd = NULL; + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + int num_channels; + int i; + dwc_hc_t *channel; + + int retval = 0; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); + + /* + * Allocate memory for the base HCD plus the DWC OTG HCD. + * Initialize the base HCD. + */ + hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev)); + if (hcd == NULL) { + retval = -ENOMEM; + goto error1; + } + dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */ + hcd->regs = otg_dev->base; + hcd->rsrc_start = (int)otg_dev->base; + + hcd->self.otg_port = 1; + + /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; + + /* Register the HCD CIL Callbacks */ + dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, + &hcd_cil_callbacks, hcd); + + /* Initialize the non-periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred); + + /* Initialize the periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); + if (channel == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: host channel allocation failed\n", __func__); + goto error2; + } + memset(channel, 0, sizeof(dwc_hc_t)); + channel->hc_num = i; + dwc_otg_hcd->hc_ptr_array[i] = channel; +#ifdef DEBUG + init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); +#endif + + DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel); + } + + /* Initialize the Connection timeout timer. */ + init_timer( &dwc_otg_hcd->conn_timer ); + + /* Initialize reset tasklet. */ + reset_tasklet.data = (unsigned long) dwc_otg_hcd; + dwc_otg_hcd->reset_tasklet = &reset_tasklet; + + /* Set device flags indicating whether the HCD supports DMA. */ + if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); + //_dev->dma_mask = (void *)~0; + //_dev->coherent_dma_mask = ~0; + _dev->dma_mask = &dma_mask; + _dev->coherent_dma_mask = DMA_BIT_MASK(32); + } else { + DWC_PRINT("Using Slave mode\n"); + _dev->dma_mask = (void *)0; + _dev->coherent_dma_mask = 0; + } + + init_hcd_usecs(dwc_otg_hcd); + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls dwc_otg_hcd_start method. + */ + retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); + if (retval < 0) { + goto error2; + } + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (otg_dev->core_if->dma_enable) { + dwc_otg_hcd->status_buf = + dma_alloc_coherent(_dev, + DWC_OTG_HCD_STATUS_BUF_SIZE, + &dwc_otg_hcd->status_buf_dma, + GFP_KERNEL | GFP_DMA); + } else { + dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + } + if (dwc_otg_hcd->status_buf == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: status_buf allocation failed\n", __func__); + goto error3; + } + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", + dev_name(_dev), hcd->self.busnum); + + return 0; + + /* Error conditions */ +error3: + usb_remove_hcd(hcd); +error2: + dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); +error1: + return retval; +} + +/** + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc_otg_hcd_remove(struct device *_dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; + struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); + + /* Turn off all interrupts */ + dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0); + + usb_remove_hcd(hcd); + + dwc_otg_hcd_free(hcd); + + usb_put_hcd(hcd); + + return; +} + + +/* ========================================================================= + * Linux HC Driver Functions + * ========================================================================= */ + +/** + * Initializes dynamic portions of the DWC_otg HCD state. + */ +static void hcd_reinit(dwc_otg_hcd_t *_hcd) +{ + struct list_head *item; + int num_channels; + int i; + dwc_hc_t *channel; + + _hcd->flags.d32 = 0; + + _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active; + _hcd->available_host_channels = _hcd->core_if->core_params->host_channels; + + /* + * Put all channels in the free channel list and clean up channel + * states. + */ + item = _hcd->free_hc_list.next; + while (item != &_hcd->free_hc_list) { + list_del(item); + item = _hcd->free_hc_list.next; + } + num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = _hcd->hc_ptr_array[i]; + list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list); + dwc_otg_hc_cleanup(_hcd->core_if, channel); + } + + /* Initialize the DWC core for host mode operation. */ + dwc_otg_core_host_init(_hcd->core_if); +} + +/** Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. */ +int dwc_otg_hcd_start(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + struct usb_bus *bus; + + // int retval; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); + + bus = hcd_to_bus(_hcd); + + /* Initialize the bus state. If the core is in Device Mode + * HALT the USB bus and return. */ + if (dwc_otg_is_device_mode (core_if)) { + _hcd->state = HC_STATE_HALT; + return 0; + } + _hcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(_hcd); + } + else { +#if 0 + struct usb_device *udev; + udev = usb_alloc_dev(NULL, bus, 0); + if (!udev) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); + return -ENODEV; + } + udev->speed = USB_SPEED_HIGH; + /* Not needed - VJ + if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval); + return -ENODEV; + } + */ +#else + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); +#endif + } + + hcd_reinit(dwc_otg_hcd); + + return 0; +} + +static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list) +{ + struct list_head *item; + dwc_otg_qh_t *qh; + + if (_qh_list->next == NULL) { + /* The list hasn't been initialized yet. */ + return; + } + + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(_hcd, _qh_list); + + for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) { + qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); + dwc_otg_hcd_qh_remove_and_free(_hcd, qh); + } +} + +/** + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +void dwc_otg_hcd_stop(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + hprt0_data_t hprt0 = { .d32=0 }; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); + + /* Turn off all host-specific interrupts. */ + dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if ); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off the vbus power */ + DWC_PRINT("PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + + return; +} + + +/** Returns the current frame number. */ +int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + hfnum_data_t hfnum; + + hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> + host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum); +#endif + return hfnum.b.frnum; +} + +/** + * Frees secondary storage associated with the dwc_otg_hcd structure contained + * in the struct usb_hcd field. + */ +void dwc_otg_hcd_free(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + int i; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); + + del_timers(dwc_otg_hcd); + + /* Free memory for QH/QTD lists */ + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); + + /* Free memory for the host channels. */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; + if (hc != NULL) { + DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc); + kfree(hc); + } + } + + if (dwc_otg_hcd->core_if->dma_enable) { + if (dwc_otg_hcd->status_buf_dma) { + dma_free_coherent(_hcd->self.controller, + DWC_OTG_HCD_STATUS_BUF_SIZE, + dwc_otg_hcd->status_buf, + dwc_otg_hcd->status_buf_dma); + } + } else if (dwc_otg_hcd->status_buf != NULL) { + kfree(dwc_otg_hcd->status_buf); + } + + return; +} + + +#ifdef DEBUG +static void dump_urb_info(struct urb *_urb, char* _fn_name) +{ + DWC_PRINT("%s, urb %p\n", _fn_name, _urb); + DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe)); + DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe), + (usb_pipein(_urb->pipe) ? "IN" : "OUT")); + DWC_PRINT(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; pipetype;})); + DWC_PRINT(" Speed: %s\n", + ({char *speed; + switch (_urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; speed;})); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe))); + DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length); + DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", + _urb->transfer_buffer, (void *)_urb->transfer_dma); + DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", + _urb->setup_packet, (void *)_urb->setup_dma); + DWC_PRINT(" Interval: %d\n", _urb->interval); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d:\n", i); + DWC_PRINT(" offset: %d, length %d\n", + _urb->iso_frame_desc[i].offset, + _urb->iso_frame_desc[i].length); + } + } +} + +static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh) +{ + if (qh->channel != NULL) { + dwc_hc_t *hc = qh->channel; + struct list_head *item; + dwc_otg_qh_t *qh_item; + int num_channels = _hcd->core_if->core_params->host_channels; + int i; + + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + + hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcdma = dwc_read_reg32(&hc_regs->hcdma); + + DWC_PRINT(" Assigned to channel %p:\n", hc); + DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" qh: %p\n", hc->qh); + DWC_PRINT(" NP inactive sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_inactive) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP active sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_deferred) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP deferred sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_active) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" Channels: \n"); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" %2d: %p\n", i, hc); + } + } +} +#endif // DEBUG + +/** Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. */ +int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, + struct urb *_urb, + gfp_t _mem_flags) +{ + unsigned long flags; + int retval; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_qtd_t *qtd; + + local_irq_save(flags); + retval = usb_hcd_link_urb_to_ep(_hcd, _urb); + if (retval) { + local_irq_restore(flags); + return retval; + } +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue"); + } +#endif // DEBUG + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* No longer connected. */ + local_irq_restore(flags); + return -ENODEV; + } + + qtd = dwc_otg_hcd_qtd_create (_urb); + if (qtd == NULL) { + local_irq_restore(flags); + DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); + return -ENOMEM; + } + + retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd); + if (retval < 0) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " + "Error status %d\n", retval); + dwc_otg_hcd_qtd_free(qtd); + } + + local_irq_restore (flags); + return retval; +} + +/** Aborts/cancels a USB transfer request. Always returns 0 to indicate + * success. */ +int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) +{ + unsigned long flags; + dwc_otg_hcd_t *dwc_otg_hcd; + dwc_otg_qtd_t *urb_qtd; + dwc_otg_qh_t *qh; + int retval; + //struct usb_host_endpoint *_ep = NULL; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + + local_irq_save(flags); + + retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status); + if (retval) { + local_irq_restore(flags); + return retval; + } + + dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv; + if (urb_qtd == NULL) { + printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb); + goto done; + } + qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr; + if (qh == NULL) { + goto done; + } + +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue"); + if (urb_qtd == qh->qtd_in_process) { + dump_channel_info(dwc_otg_hcd, qh); + } + } +#endif // DEBUG + + if (urb_qtd == qh->qtd_in_process) { + /* The QTD is in process (it has been assigned to a channel). */ + + if (dwc_otg_hcd->flags.b.port_connect_status) { + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); + } + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + dwc_otg_hcd_qtd_remove_and_free(urb_qtd); + if (urb_qtd == qh->qtd_in_process) { + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); + qh->channel = NULL; + qh->qtd_in_process = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); + } + +done: + local_irq_restore(flags); + _urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); + usb_hcd_giveback_urb(_hcd, _urb, _status); + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", _urb->status); + } + + return 0; +} + + +/** Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. */ +void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, + struct usb_host_endpoint *_ep) + +{ + dwc_otg_qh_t *qh; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " + "endpoint=%d\n", _ep->desc.bEndpointAddress, + dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress)); + + qh = (dwc_otg_qh_t *)(_ep->hcpriv); + if (qh != NULL) { +#ifdef DEBUG + /** Check that the QTD list is really empty */ + if (!list_empty(&qh->qtd_list)) { + DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoint is not empty\n"); + } +#endif // DEBUG + + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + _ep->hcpriv = NULL; + } + + return; +} +extern int dwc_irq; +/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs */ +irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + + mask_and_ack_ifx_irq (dwc_irq); + return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd)); +} + +/** Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. */ +int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + + _buf[0] = 0; + _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change || + dwc_otg_hcd->flags.b.port_reset_change || + dwc_otg_hcd->flags.b.port_enable_change || + dwc_otg_hcd->flags.b.port_suspend_change || + dwc_otg_hcd->flags.b.port_over_current_change) << 1; + +#ifdef DEBUG + if (_buf[0]) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" + " Root port status changed\n"); + DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", + dwc_otg_hcd->flags.b.port_connect_status_change); + DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", + dwc_otg_hcd->flags.b.port_reset_change); + DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", + dwc_otg_hcd->flags.b.port_enable_change); + DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", + dwc_otg_hcd->flags.b.port_suspend_change); + DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", + dwc_otg_hcd->flags.b.port_over_current_change); + } +#endif // DEBUG + return (_buf[0] != 0); +} + +#ifdef DWC_HS_ELECT_TST +/* + * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * + * This code was copied from our userspace app "hset". It sends a + * Get Device Descriptor control sequence in two parts, first the + * Setup packet by itself, followed some time later by the In and + * Ack packets. Rather than trying to figure out how to add this + * functionality to the normal driver code, we just hijack the + * hardware, using these two function to drive the hardware + * directly. + */ + +dwc_otg_core_global_regs_t *global_regs; +dwc_otg_host_global_regs_t *hc_global_regs; +dwc_otg_hc_regs_t *hc_regs; +uint32_t *data_fifo; + +static void do_setup(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Send Setup packet (Get Device Descriptor) + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + // hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descriptor */ + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + dwc_write_reg32(data_fifo++, 0x01000680); + dwc_write_reg32(data_fifo++, 0x00080000); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} + +static void do_in_ack(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + host_grxsts_data_t grxsts; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Receive Control In packet + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 1; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer */ + if (grxsts.b.bcnt > 0) { + int i; + int word_count = (grxsts.b.bcnt + 3) / 4; + + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + for (i = 0; i < word_count; i++) { + (void)dwc_read_reg32(data_fifo++); + } + } + + //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + // usleep(100000); + // mdelay(100); + MDELAY(1); + + /* + * Send handshake packet + */ + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} +#endif /* DWC_HS_ELECT_TST */ + +/** Handles hub class-specific requests.*/ +int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, + u16 _typeReq, + u16 _wValue, + u16 _wIndex, + char *_buf, + u16 _wLength) +{ + int retval = 0; + + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if; + struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; + + uint32_t port_status; + + switch (_typeReq) { + case ClearHubFeature: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearHubFeature 0x%x\n", _wValue); + switch (_wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "ClearHubFeature request %xh unknown\n", _wValue); + } + break; + case ClearPortFeature: + if (!_wIndex || _wIndex > 1) + goto error; + + switch (_wValue) { + case USB_PORT_FEAT_ENABLE: + DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtena = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + /* Clear Resume bit */ + mdelay (100); + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtpwr = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port inidicator not supported */ + break; + case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect status change + * flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + dwc_otg_hcd->flags.b.port_connect_status_change = 0; + break; + case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port Reset Change + * flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + dwc_otg_hcd->flags.b.port_reset_change = 0; + break; + case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port + * Enable/Disable Change flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + dwc_otg_hcd->flags.b.port_enable_change = 0; + break; + case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Suspend + * Change flag, which is set when resume signaling on + * the host port is complete */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + dwc_otg_hcd->flags.b.port_suspend_change = 0; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + dwc_otg_hcd->flags.b.port_over_current_change = 0; + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "ClearPortFeature request %xh " + "unknown or unsupported\n", _wValue); + } + break; + case GetHubDescriptor: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)_buf; + desc->bDescLength = 9; + desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; + break; + case GetHubStatus: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubStatus\n"); + memset (_buf, 0, 4); + break; + case GetPortStatus: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetPortStatus\n"); + + if (!_wIndex || _wIndex > 1) + goto error; + + port_status = 0; + + if (dwc_otg_hcd->flags.b.port_connect_status_change) + port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + + if (dwc_otg_hcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ENABLE); + + if (dwc_otg_hcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + + if (dwc_otg_hcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_RESET); + + if (dwc_otg_hcd->flags.b.port_over_current_change) { + DWC_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + printk("DISCONNECTED PORT\n"); + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ +#if 1 // winder. + *((u32 *) _buf) = cpu_to_le32(port_status); +#else + *((__le32 *) _buf) = cpu_to_le32(port_status); +#endif + break; + } + + hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); + DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); + + if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CONNECTION); + + if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_ENABLE); + + if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SUSPEND); + + if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); + + if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RESET); + + if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_POWER); + + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + + else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) + port_status |= (1 << USB_PORT_FEAT_LOWSPEED); + + if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TEST); + + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ +#if 1 // winder. + *((u32 *) _buf) = cpu_to_le32(port_status); +#else + *((__le32 *) _buf) = cpu_to_le32(port_status); +#endif + + break; + case SetHubFeature: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetHubFeature\n"); + /* No HUB features supported */ + break; + case SetPortFeature: + if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1)) + goto error; + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (_wValue) { + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (_hcd->self.otg_port == _wIndex + && _hcd->self.b_hnp_enable) { + gotgctl_data_t gotgctl = {.d32=0}; + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&core_if->core_global_regs-> + gotgctl, 0, gotgctl.d32); + core_if->op_state = A_SUSPEND; + } + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32); + /* Suspend the Phy Clock */ + { + pcgcctl_data_t pcgcctl = {.d32=0}; + pcgcctl.b.stoppclk = 1; + dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); + } + + /* For HNP the bus must be suspended for at least 200ms.*/ + if (_hcd->self.b_hnp_enable) { + mdelay(200); + //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state); + } + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_RESET: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + /* TODO: Is this for OTG protocol?? + * We shoudl remove OTG totally for Danube system. + * But, in the future, maybe we need this. + */ +#if 1 // winder + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); +#else + /* When B-Host the Port reset bit is set in + * the Start HCD Callback function, so that + * the reset is started within 1ms of the HNP + * success interrupt. */ + if (!_hcd->self.is_b_host) { + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } +#endif + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + MDELAY (60); + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + +#ifdef DWC_HS_ELECT_TST + case USB_PORT_FEAT_TEST: + { + uint32_t t; + gintmsk_data_t gintmsk; + + t = (_wIndex >> 8); /* MSB wIndex USB */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); + printk("USB_PORT_FEAT_TEST %d\n", t); + if (t < 6) { + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prttstctl = t; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } else { + /* Setup global vars with reg addresses (quick and + * dirty hack, should be cleaned up) + */ + global_regs = core_if->core_global_regs; + hc_global_regs = core_if->host_if->host_global_regs; + hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500); + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive suspend on the root port */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive resume on the root port */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 0; + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(100); + + /* Clear the resume bit */ + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Send the In and Ack packets */ + do_in_ack(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } + } + break; + } +#endif /* DWC_HS_ELECT_TST */ + + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "SetPortFeature request %xh " + "unknown or unsupported\n", _wValue); + break; + } + break; + default: +error: + retval = -EINVAL; + DWC_WARN ("DWC OTG HCD - " + "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", + _typeReq, _wIndex, _wValue); + break; + } + + return retval; +} + + +/** + * Assigns transactions from a QTD to a free host channel and initializes the + * host channel to perform the transactions. The host channel is removed from + * the free list. + * + * @param _hcd The HCD state structure. + * @param _qh Transactions from the first QTD for this QH are selected and + * assigned to a free host channel. + */ +static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + dwc_hc_t *hc; + dwc_otg_qtd_t *qtd; + struct urb *urb; + + DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh); + + hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); + + /* Remove the host channel from the free list. */ + list_del_init(&hc->hc_list_entry); + + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + urb = qtd->urb; + _qh->channel = hc; + _qh->qtd_in_process = qtd; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + hc->dev_addr = usb_pipedevice(urb->pipe); + hc->ep_num = usb_pipeendpoint(urb->pipe); + + if (urb->dev->speed == USB_SPEED_LOW) { + hc->speed = DWC_OTG_EP_SPEED_LOW; + } else if (urb->dev->speed == USB_SPEED_FULL) { + hc->speed = DWC_OTG_EP_SPEED_FULL; + } else { + hc->speed = DWC_OTG_EP_SPEED_HIGH; + } + hc->max_packet = dwc_max_packet(_qh->maxp); + + hc->xfer_started = 0; + hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; + hc->error_state = (qtd->error_count > 0); + hc->halt_on_queue = 0; + hc->halt_pending = 0; + hc->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + hc->do_ping = _qh->ping_state; + hc->ep_is_in = (usb_pipein(urb->pipe) != 0); + hc->data_pid_start = _qh->data_toggle; + hc->multi_count = 1; + + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length; + } + hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; + hc->xfer_count = 0; + + /* + * Set the split attributes + */ + hc->do_split = 0; + if (_qh->do_split) { + hc->do_split = 1; + hc->xact_pos = qtd->isoc_split_pos; + hc->complete_split = qtd->complete_split; + hc->hub_addr = urb->dev->tt->hub->devnum; + hc->port_addr = urb->dev->ttport; + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; + switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); + hc->do_ping = 0; + hc->ep_is_in = 0; + hc->data_pid_start = DWC_OTG_HC_PID_SETUP; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->setup_packet; + } + hc->xfer_len = 8; + break; + case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); + hc->data_pid_start = qtd->data_toggle; + break; + case DWC_OTG_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data. + */ + DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); + if (urb->transfer_buffer_length == 0) { + hc->ep_is_in = 1; + } else { + hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); + } + if (hc->ep_is_in) { + hc->do_ping = 0; + } + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + hc->xfer_len = 0; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma; + } else { + hc->xfer_buff = (uint8_t *)_hcd->status_buf; + } + break; + } + break; + case PIPE_BULK: + hc->ep_type = DWC_OTG_EP_TYPE_BULK; + break; + case PIPE_INTERRUPT: + hc->ep_type = DWC_OTG_EP_TYPE_INTR; + break; + case PIPE_ISOCHRONOUS: + { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; + hc->ep_type = DWC_OTG_EP_TYPE_ISOC; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer; + } + hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; + hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { + if (hc->xfer_len <= 188) { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; + } + else { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; + } + } + } + break; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This value may be modified when the transfer is started to + * reflect the actual transfer length. + */ + hc->multi_count = dwc_hb_mult(_qh->maxp); + } + + dwc_otg_hc_init(_hcd->core_if, hc); + hc->qh = _qh; +} +#define DEBUG_HOST_CHANNELS +#ifdef DEBUG_HOST_CHANNELS +static int last_sel_trans_num_per_scheduled = 0; +module_param(last_sel_trans_num_per_scheduled, int, 0444); + +static int last_sel_trans_num_nonper_scheduled = 0; +module_param(last_sel_trans_num_nonper_scheduled, int, 0444); + +static int last_sel_trans_num_avail_hc_at_start = 0; +module_param(last_sel_trans_num_avail_hc_at_start, int, 0444); + +static int last_sel_trans_num_avail_hc_at_end = 0; +module_param(last_sel_trans_num_avail_hc_at_end, int, 0444); +#endif /* DEBUG_HOST_CHANNELS */ + +/** + * This function selects transactions from the HCD transfer schedule and + * assigns them to available host channels. It is called from HCD interrupt + * handler functions. + * + * @param _hcd The HCD state structure. + * + * @return The types of new transactions that were assigned to host channels. + */ +dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) +{ + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int num_channels; + unsigned long flags; + dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif /* */ + +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_per_scheduled = 0; + last_sel_trans_num_nonper_scheduled = 0; + last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels; +#endif /* DEBUG_HOST_CHANNELS */ + + /* Process entries in the periodic ready list. */ + num_channels = _hcd->core_if->core_params->host_channels; + qh_ptr = _hcd->periodic_sched_ready.next; + while (qh_ptr != &_hcd->periodic_sched_ready + && !list_empty(&_hcd->free_hc_list)) { + + // Make sure we leave one channel for non periodic transactions. + local_irq_save(flags); + if (_hcd->available_host_channels <= 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_per_scheduled++; +#endif /* DEBUG_HOST_CHANNELS */ + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule. + */ + qh_ptr = qh_ptr->next; + local_irq_save(flags); + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned); + local_irq_restore(flags); + ret_val = DWC_OTG_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the deferred portion of the non-periodic list. + * A NAK put them here and, at the right time, they need to be + * placed on the sched_inactive list. + */ + qh_ptr = _hcd->non_periodic_sched_deferred.next; + while (qh_ptr != &_hcd->non_periodic_sched_deferred) { + uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + qh_ptr = qh_ptr->next; + + if (dwc_frame_num_le(qh->sched_frame, frame_number)) { + // NAK did this + /* + * Move the QH from the non periodic deferred schedule to + * the non periodic inactive schedule. + */ + local_irq_save(flags); + list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_inactive); + local_irq_restore(flags); + } + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + qh_ptr = _hcd->non_periodic_sched_inactive.next; + num_channels = _hcd->core_if->core_params->host_channels; + while (qh_ptr != &_hcd->non_periodic_sched_inactive + && !list_empty(&_hcd->free_hc_list)) { + + local_irq_save(flags); + if (_hcd->available_host_channels < 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_nonper_scheduled++; +#endif /* DEBUG_HOST_CHANNELS */ + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule. + */ + qh_ptr = qh_ptr->next; + local_irq_save(flags); + list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active); + local_irq_restore(flags); + + if (ret_val == DWC_OTG_TRANSACTION_NONE) { + ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; + } else { + ret_val = DWC_OTG_TRANSACTION_ALL; + } + + } +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels; +#endif /* DEBUG_HOST_CHANNELS */ + + return ret_val; +} + +/** + * Attempts to queue a single transaction request for a host channel + * associated with either a periodic or non-periodic transfer. This function + * assumes that there is space available in the appropriate request queue. For + * an OUT transfer or SETUP transaction in Slave mode, it checks whether space + * is available in the appropriate Tx FIFO. + * + * @param _hcd The HCD state structure. + * @param _hc Host channel descriptor associated with either a periodic or + * non-periodic transfer. + * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx + * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic + * transfers. + * + * @return 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO. + */ +static int queue_transaction(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + uint16_t _fifo_dwords_avail) +{ + int retval; + + if (_hcd->core_if->dma_enable) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + _hc->qh->ping_state = 0; + } + retval = 0; + } else if (_hc->halt_pending) { + /* Don't queue a request if the channel has been halted. */ + retval = 0; + } else if (_hc->halt_on_queue) { + dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status); + retval = 0; + } else if (_hc->do_ping) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + } + retval = 0; + } else if (!_hc->ep_is_in || + _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + if ((_fifo_dwords_avail * 4) >= _hc->max_packet) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } else { + retval = -1; + } + } else { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } + + return retval; +} + +/** + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + */ +static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd) +{ + gnptxsts_data_t tx_status; + struct list_head *orig_qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + orig_qh_ptr = _hcd->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO. + */ + do { + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry); + status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } + + /* Advance to next QH, skipping start-of-list entry. */ + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + + } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr); + + if (!_hcd->core_if->dma_enable) { + gintmsk_data_t intr_mask = {.d32 = 0}; + intr_mask.b.nptxfempty = 1; + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + */ +static void process_periodic_channels(dwc_otg_hcd_t *_hcd) +{ + hptxsts_data_t tx_status; + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + + dwc_otg_host_global_regs_t *host_regs; + host_regs = _hcd->core_if->host_if->host_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + + qh_ptr = _hcd->periodic_sched_assigned.next; + while (qh_ptr != &_hcd->periodic_sched_assigned) { + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + if (tx_status.b.ptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if ((!_hcd->core_if->dma_enable) && + (qh->channel->multi_count > 1)) + { + _hcd->core_if->queuing_high_bandwidth = 1; + } + + status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (_hcd->core_if->dma_enable || + (status == 0 || + qh->channel->requests == qh->channel->multi_count)) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule. + */ + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued); + + /* done queuing high bandwidth */ + _hcd->core_if->queuing_high_bandwidth = 0; + } + } + + if (!_hcd->core_if->dma_enable) { + dwc_otg_core_global_regs_t *global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + global_regs = _hcd->core_if->core_global_regs; + intr_mask.b.ptxfempty = 1; +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + if (!(list_empty(&_hcd->periodic_sched_assigned)) || + no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * This function processes the currently active host channels and queues + * transactions for these channels to the DWC_otg controller. It is called + * from HCD interrupt handler functions. + * + * @param _hcd The HCD state structure. + * @param _tr_type The type(s) of transactions to queue (non-periodic, + * periodic, or both). + */ +void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd, + dwc_otg_transaction_type_e _tr_type) +{ +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC || + _tr_type == DWC_OTG_TRANSACTION_ALL) && + !list_empty(&_hcd->periodic_sched_assigned)) { + + process_periodic_channels(_hcd); + } + + /* Process host channels associated with non-periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || + _tr_type == DWC_OTG_TRANSACTION_ALL)) { + if (!list_empty(&_hcd->non_periodic_sched_active)) { + process_non_periodic_channels(_hcd); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process. + */ + gintmsk_data_t gintmsk = {.d32 = 0}; + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + } + } +} + +/** + * Sets the final status of an URB and returns it to the device driver. Any + * required cleanup of the URB is performed. + */ +void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb, + int _status) + __releases(_hcd->lock) +__acquires(_hcd->lock) +{ +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", + __func__, _urb, usb_pipedevice(_urb->pipe), + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) ? "IN" : "OUT", _status); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d status: %d\n", + i, _urb->iso_frame_desc[i].status); + } + } + } +#endif + + _urb->status = _status; + _urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb); + spin_unlock(&_hcd->lock); + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status); + spin_lock(&_hcd->lock); +} + +/* + * Returns the Queue Head for an URB. + */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb) +{ + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb); + return (dwc_otg_qh_t *)ep->hcpriv; +} + +#ifdef DEBUG +void dwc_print_setup_data (uint8_t *setup) +{ + int i; + if (CHK_DEBUG_LEVEL(DBG_HCD)){ + DWC_PRINT("Setup Data = MSB "); + for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]); + DWC_PRINT("\n"); + DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device"); + DWC_PRINT(" bmRequestType Type = "); + switch ((setup[0]&0x60) >> 5) { + case 0: DWC_PRINT("Standard\n"); break; + case 1: DWC_PRINT("Class\n"); break; + case 2: DWC_PRINT("Vendor\n"); break; + case 3: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bmRequestType Recipient = "); + switch (setup[0]&0x1f) { + case 0: DWC_PRINT("Device\n"); break; + case 1: DWC_PRINT("Interface\n"); break; + case 2: DWC_PRINT("Endpoint\n"); break; + case 3: DWC_PRINT("Other\n"); break; + default: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); + DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2])); + DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4])); + DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6])); + } +} +#endif + +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) { +#ifdef DEBUG +#if 0 + DWC_PRINT("Frame remaining at SOF:\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->frrem_samples, _hcd->frrem_accum, + (_hcd->frrem_samples > 0) ? + _hcd->frrem_accum/_hcd->frrem_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum, + (_hcd->core_if->hfnum_7_samples > 0) ? + _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum, + (_hcd->core_if->hfnum_0_samples > 0) ? + _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum, + (_hcd->core_if->hfnum_other_samples > 0) ? + _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point A (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a, + (_hcd->hfnum_7_samples_a > 0) ? + _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a, + (_hcd->hfnum_0_samples_a > 0) ? + _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a, + (_hcd->hfnum_other_samples_a > 0) ? + _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point B (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b, + (_hcd->hfnum_7_samples_b > 0) ? + _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b, + (_hcd->hfnum_0_samples_b > 0) ? + _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b, + (_hcd->hfnum_other_samples_b > 0) ? + _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0); +#endif +#endif +} + +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd) +{ +#ifdef DEBUG + int num_channels; + int i; + gnptxsts_data_t np_tx_status; + hptxsts_data_t p_tx_status; + + num_channels = _hcd->core_if->core_params->host_channels; + DWC_PRINT("\n"); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("HCD State:\n"); + DWC_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" Channel %d:\n", i); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" speed: %d\n", hc->speed); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" multi_count: %d\n", hc->multi_count); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); + DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); + DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" do_split: %d\n", hc->do_split); + DWC_PRINT(" complete_split: %d\n", hc->complete_split); + DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); + DWC_PRINT(" port_addr: %d\n", hc->port_addr); + DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); + DWC_PRINT(" requests: %d\n", hc->requests); + DWC_PRINT(" qh: %p\n", hc->qh); + if (hc->xfer_started) { + hfnum_data_t hfnum; + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); + hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar); + hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz); + hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk); + DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); + DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); + DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); + DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); + DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); + } + if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) { + dwc_otg_qtd_t *qtd; + struct urb *urb; + qtd = hc->qh->qtd_in_process; + urb = qtd->urb; + DWC_PRINT(" URB Info:\n"); + DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); + if (urb != NULL) { + DWC_PRINT(" Dev: %d, EP: %d %s\n", + usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer); + DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma); + DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length); + DWC_PRINT(" actual_length: %d\n", urb->actual_length); + } + } + } + //DWC_PRINT(" non_periodic_channels: %d\n", _hcd->non_periodic_channels); + //DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels); + DWC_PRINT(" available_channels: %d\n", _hcd->available_host_channels); + DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs); + np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts); + DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail); + DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail); + p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts); + DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail); + DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); + dwc_otg_hcd_dump_frrem(_hcd); + dwc_otg_dump_global_registers(_hcd->core_if); + dwc_otg_dump_host_registers(_hcd->core_if); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("\n"); +#endif +} +#endif /* DWC_DEVICE_ONLY */ |