summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch')
-rw-r--r--target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch89
1 files changed, 89 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch b/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch
new file mode 100644
index 0000000..84aa965
--- /dev/null
+++ b/target/linux/lantiq/patches-3.7/0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch
@@ -0,0 +1,89 @@
+From af14a456c58c153c6d761e6c0af48157692b52ad Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Nov 2012 13:43:30 +0100
+Subject: [PATCH 5/6] MIPS: lantiq: adds code for booting GPHY
+
+The XRX200 family of SoCs has embedded gigabit PHYs. This patch adds code to
+boot them up.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4522
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 ++
+ arch/mips/lantiq/xway/reset.c | 36 ++++++++++++++++++++
+ 2 files changed, 39 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 6a2df70..133336b 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -82,6 +82,9 @@ extern __iomem void *ltq_cgu_membase;
+ #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
+ #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
++/* allow booting xrx200 phys */
++int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
++
+ /* request a non-gpio and set the PIO config */
+ #define PMU_PPE BIT(13)
+ extern void ltq_pmu_enable(unsigned int module);
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index 2799212..544dbb7 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -28,9 +28,15 @@
+ #define RCU_RST_REQ 0x0010
+ /* reset status register */
+ #define RCU_RST_STAT 0x0014
++/* vr9 gphy registers */
++#define RCU_GFS_ADD0_XRX200 0x0020
++#define RCU_GFS_ADD1_XRX200 0x0068
+
+ /* reboot bit */
++#define RCU_RD_GPHY0_XRX200 BIT(31)
+ #define RCU_RD_SRST BIT(30)
++#define RCU_RD_GPHY1_XRX200 BIT(29)
++
+ /* reset cause */
+ #define RCU_STAT_SHIFT 26
+ /* boot selection */
+@@ -60,6 +66,36 @@ unsigned char ltq_boot_select(void)
+ return RCU_BOOT_SEL(val);
+ }
+
++/* reset / boot a gphy */
++static struct ltq_xrx200_gphy_reset {
++ u32 rd;
++ u32 addr;
++} xrx200_gphy[] = {
++ {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
++ {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
++};
++
++/* reset and boot a gphy. these phys only exist on xrx200 SoC */
++int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
++{
++ if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
++ dev_err(dev, "this SoC has no GPHY\n");
++ return -EINVAL;
++ }
++ if (id > 1) {
++ dev_err(dev, "%u is an invalid gphy id\n", id);
++ return -EINVAL;
++ }
++ dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
++
++ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
++ RCU_RST_REQ);
++ ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
++ RCU_RST_REQ);
++ return 0;
++}
++
+ /* reset a io domain for u micro seconds */
+ void ltq_reset_once(unsigned int module, ulong u)
+ {
+--
+1.7.10.4
+