1 files changed, 0 insertions, 87 deletions
diff --git a/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch b/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
deleted file mode 100644
index c83dbd8..0000000
--- a/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 5e19578b807e7ef6e7baf05fb1f69433d5e74667 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 30 Nov 2012 21:11:22 +0100
-Subject: [PATCH 05/40] PINCTRL: lantiq: pinconf uses port instead of pin
-
-The XWAY pinctrl driver invalidly uses the port and not the pin number to work
-out the registeres and bits to be set for the opendrain and pullup/down
-resistors.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++--------------
- 1 file changed, 14 insertions(+), 14 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_OD;
- 		else
--			reg = GPIO_OD(port);
-+			reg = GPIO_OD(pin);
- 		*config = LTQ_PINCONF_PACK(param,
--			!!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
-+			!!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
- 		if (port == PORT3)
- 			reg = GPIO3_PUDEN;
- 		else
--			reg = GPIO_PUDEN(port);
--		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
-+			reg = GPIO_PUDEN(pin);
-+		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
- 			*config = LTQ_PINCONF_PACK(param, 0);
- 			break;
- 		}
-@@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_PUDSEL;
- 		else
--			reg = GPIO_PUDSEL(port);
--		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
-+			reg = GPIO_PUDSEL(pin);
-+		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
- 			*config = LTQ_PINCONF_PACK(param, 2);
- 		else
- 			*config = LTQ_PINCONF_PACK(param, 1);
-@@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_OD;
- 		else
--			reg = GPIO_OD(port);
--		gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+			reg = GPIO_OD(pin);
-+		gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
- 		if (port == PORT3)
- 			reg = GPIO3_PUDEN;
- 		else
--			reg = GPIO_PUDEN(port);
-+			reg = GPIO_PUDEN(pin);
- 		if (arg == 0) {
--			gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
- 			break;
- 		}
--		gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+		gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 
- 		if (port == PORT3)
- 			reg = GPIO3_PUDSEL;
- 		else
--			reg = GPIO_PUDSEL(port);
-+			reg = GPIO_PUDSEL(pin);
- 		if (arg == 1)
--			gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
- 		else if (arg == 2)
--			gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 		else
- 			dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
- 		break;