1 files changed, 0 insertions, 61 deletions
diff --git a/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch b/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
deleted file mode 100644
index ea3f7e0..0000000
--- a/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From f9441b4f98b5b28f3d2cbebd0a70b227c35451d9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 18:33:39 +0100
-Subject: [PATCH 08/40] PINCTRL: lantiq: add output pinconf parameter
-
-While converting the boards inside OpenWrt to OF I noticed that the we are
-missing a pinconf parameter to set a pin to output.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-lantiq.h |    1 +
- drivers/pinctrl/pinctrl-xway.c   |   14 ++++++++++++++
- 2 files changed, 15 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-lantiq.h
-+++ b/drivers/pinctrl/pinctrl-lantiq.h
-@@ -34,6 +34,7 @@ enum ltq_pinconf_param {
- 	LTQ_PINCONF_PARAM_OPEN_DRAIN,
- 	LTQ_PINCONF_PARAM_DRIVE_CURRENT,
- 	LTQ_PINCONF_PARAM_SLEW_RATE,
-+	LTQ_PINCONF_PARAM_OUTPUT,
- };
- 
- struct ltq_cfg_param {
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -466,6 +466,11 @@ static int xway_pinconf_get(struct pinct
- 			*config = LTQ_PINCONF_PACK(param, 1);
- 		break;
- 
-+	case LTQ_PINCONF_PARAM_OUTPUT:
-+		reg = GPIO_DIR(pin);
-+		*config = LTQ_PINCONF_PACK(param,
-+			gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
-+		break;
- 	default:
- 		dev_err(pctldev->dev, "Invalid config param %04x\n", param);
- 		return -ENOTSUPP;
-@@ -515,6 +520,14 @@ static int xway_pinconf_set(struct pinct
- 			dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
- 		break;
- 
-+	case LTQ_PINCONF_PARAM_OUTPUT:
-+		reg = GPIO_DIR(pin);
-+		if (arg == 0)
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
-+		else
-+			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
-+		break;
-+
- 	default:
- 		dev_err(pctldev->dev, "Invalid config param %04x\n", param);
- 		return -ENOTSUPP;
-@@ -573,6 +586,7 @@ static inline int xway_mux_apply(struct
- static const struct ltq_cfg_param xway_cfg_params[] = {
- 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
- 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-+	{"lantiq,output",	LTQ_PINCONF_PARAM_OUTPUT},
- };
- 
- static struct ltq_pinmux_info xway_info = {