diff options
Diffstat (limited to 'target/linux/lantiq/patches-4.4/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch')
| -rw-r--r-- | target/linux/lantiq/patches-4.4/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/target/linux/lantiq/patches-4.4/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch b/target/linux/lantiq/patches-4.4/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch deleted file mode 100644 index 67cf7d3..0000000 --- a/target/linux/lantiq/patches-4.4/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch +++ /dev/null @@ -1,53 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Thu, 19 Jan 2017 14:14:36 +0100 -Subject: [PATCH] MIPS: Lantiq: Keep ethernet enabled during boot - -Disabling ethernet during reboot (only to enable it again when the -ethernet driver attaches) can put the chip into a faulty state where it -corrupts the header of all incoming packets. - -This happens if packets arrive during the time window where the core is -disabled, and it can be easily reproduced by rebooting while sending a -flood ping to the broadcast address. - -Cc: john@phrozen.org -Cc: hauke.mehrtens@lantiq.com -Cc: stable@vger.kernel.org -Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default") -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -564,7 +564,7 @@ void __init ltq_soc_init(void) - clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); - clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); - clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); -- clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP); -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - } else if (of_machine_is_compatible("lantiq,ar10")) { -@@ -572,7 +572,7 @@ void __init ltq_soc_init(void) - ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); - clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); - clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); -- clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | - PMU_PPE_DP | PMU_PPE_TC); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); -@@ -594,11 +594,11 @@ void __init ltq_soc_init(void) - clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); - - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); -- clkdev_add_pmu("1e108000.eth", NULL, 1, 0, -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, - PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | - PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | - PMU_PPE_QSB | PMU_PPE_TOP); -- clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203000.rcu", "gphy", 0, 0, PMU_GPHY); - clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); |