diff options
Diffstat (limited to 'target/linux/lantiq/patches/104-board_xway.patch')
-rw-r--r-- | target/linux/lantiq/patches/104-board_xway.patch | 3212 |
1 files changed, 0 insertions, 3212 deletions
diff --git a/target/linux/lantiq/patches/104-board_xway.patch b/target/linux/lantiq/patches/104-board_xway.patch deleted file mode 100644 index 297fbd3..0000000 --- a/target/linux/lantiq/patches/104-board_xway.patch +++ /dev/null @@ -1,3212 +0,0 @@ - ---- /dev/null -+++ b/arch/mips/lantiq/xway/Kconfig -@@ -0,0 +1,19 @@ -+if SOC_LANTIQ_XWAY -+ -+menu "Mips Machine" -+ -+config LANTIQ_MACH_EASY50812 -+ bool "Easy50812" -+ default y -+ -+config LANTIQ_MACH_EASY50712 -+ bool "Easy50712" -+ default y -+ -+config LANTIQ_MACH_EASY4010 -+ bool "Easy4010" -+ default y -+ -+endmenu -+ -+endif ---- /dev/null -+++ b/arch/mips/lantiq/xway/gpio_ebu.c -@@ -0,0 +1,116 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/platform_device.h> -+#include <linux/mutex.h> -+#include <linux/gpio.h> -+ -+#include <xway.h> -+ -+#define LQ_EBU_BUSCON 0x1e7ff -+#define LQ_EBU_WP 0x80000000 -+ -+static int shadow = 0x0000; -+static void __iomem *virt; -+ -+static int -+lq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ return 0; -+} -+ -+static void -+lq_ebu_apply(void) -+{ -+ unsigned long flags; -+ spin_lock_irqsave(&ebu_lock, flags); -+ lq_w32(LQ_EBU_BUSCON, LQ_EBU_BUSCON1); -+ *((__u16*)virt) = shadow; -+ lq_w32(LQ_EBU_BUSCON | LQ_EBU_WP, LQ_EBU_BUSCON1); -+ spin_unlock_irqrestore(&ebu_lock, flags); -+} -+ -+static void -+lq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ if(value) -+ shadow |= (1 << offset); -+ else -+ shadow &= ~(1 << offset); -+ lq_ebu_apply(); -+} -+ -+static struct gpio_chip -+lq_ebu_chip = -+{ -+ .label = "lq_ebu", -+ .direction_output = lq_ebu_direction_output, -+ .set = lq_ebu_set, -+ .base = 32, -+ .ngpio = 16, -+ .can_sleep = 0, -+ .owner = THIS_MODULE, -+}; -+ -+static int __devinit -+lq_ebu_probe(struct platform_device *pdev) -+{ -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ int ret = 0; -+ if (!res) -+ return -ENOENT; -+ res = request_mem_region(res->start, resource_size(res), -+ dev_name(&pdev->dev)); -+ if (!res) -+ return -EBUSY; -+ -+ /* tell the ebu controller which mem addr we will be using */ -+ lq_w32(pdev->resource->start | 0x1, LQ_EBU_ADDRSEL1); -+ lq_w32(LQ_EBU_BUSCON | LQ_EBU_WP, LQ_EBU_BUSCON1); -+ -+ virt = ioremap_nocache(res->start, resource_size(res)); -+ if (!virt) -+ { -+ dev_err(&pdev->dev, "Failed to ioremap mem region\n"); -+ ret = -ENOMEM; -+ goto err_release_mem_region; -+ } -+ /* grab the default settings passed form the platform code */ -+ shadow = (unsigned int) pdev->dev.platform_data; -+ -+ ret = gpiochip_add(&lq_ebu_chip); -+ if (!ret) -+ { -+ lq_ebu_apply(); -+ return 0; -+ } -+ -+err_release_mem_region: -+ release_mem_region(res->start, resource_size(res)); -+ return ret; -+} -+ -+static struct platform_driver -+lq_ebu_driver = { -+ .probe = lq_ebu_probe, -+ .driver = { -+ .name = "lq_ebu", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init -+init_lq_ebu(void) -+{ -+ return platform_driver_register(&lq_ebu_driver); -+} -+ -+postcore_initcall(init_lq_ebu); ---- /dev/null -+++ b/arch/mips/lantiq/xway/gpio_leds.c -@@ -0,0 +1,161 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org> -+ * -+ */ -+ -+#include <linux/slab.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/platform_device.h> -+#include <linux/mutex.h> -+#include <linux/gpio.h> -+ -+#include <xway.h> -+ -+#define LQ_STP_BASE 0x1E100BB0 -+#define LQ_STP_SIZE 0x40 -+ -+#define LQ_STP_CON0 0x00 -+#define LQ_STP_CON1 0x04 -+#define LQ_STP_CPU0 0x08 -+#define LQ_STP_CPU1 0x0C -+#define LQ_STP_AR 0x10 -+ -+#define STP_CON0_SWU (1 << 31) -+ -+#define LQ_STP_2HZ (0) -+#define LQ_STP_4HZ (1 << 23) -+#define LQ_STP_8HZ (2 << 23) -+#define LQ_STP_10HZ (3 << 23) -+#define LQ_STP_MASK (0xf << 23) -+ -+#define LQ_STP_UPD_SRC_FPI (1 << 31) -+#define LQ_STP_UPD_MASK (3 << 30) -+#define LQ_STP_ADSL_SRC (3 << 24) -+ -+#define LQ_STP_GROUP0 (1 << 0) -+ -+#define LQ_STP_RISING 0 -+#define LQ_STP_FALLING (1 << 26) -+#define LQ_STP_EDGE_MASK (1 << 26) -+ -+#define lq_stp_r32(reg) __raw_readl(virt + reg) -+#define lq_stp_w32(val, reg) __raw_writel(val, virt + reg) -+#define lq_stp_w32_mask(clear, set, reg) \ -+ lq_w32((lq_r32(virt + reg) & ~clear) | set, virt + reg) -+ -+static int shadow = 0xffff; -+static void __iomem *virt; -+ -+static int -+lq_stp_direction_output(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ return 0; -+} -+ -+static void -+lq_stp_set(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ if(value) -+ shadow |= (1 << offset); -+ else -+ shadow &= ~(1 << offset); -+ lq_stp_w32(shadow, LQ_STP_CPU0); -+} -+ -+static struct gpio_chip lq_stp_chip = -+{ -+ .label = "lq_stp", -+ .direction_output = lq_stp_direction_output, -+ .set = lq_stp_set, -+ .base = 48, -+ .ngpio = 24, -+ .can_sleep = 0, -+ .owner = THIS_MODULE, -+}; -+ -+static int -+lq_stp_hw_init(void) -+{ -+ /* the 3 pins used to control the external stp */ -+ lq_gpio_request(4, 1, 0, 1, "stp-st"); -+ lq_gpio_request(5, 1, 0, 1, "stp-d"); -+ lq_gpio_request(6, 1, 0, 1, "stp-sh"); -+ -+ /* sane defaults */ -+ lq_stp_w32(0, LQ_STP_AR); -+ lq_stp_w32(0, LQ_STP_CPU0); -+ lq_stp_w32(0, LQ_STP_CPU1); -+ lq_stp_w32(STP_CON0_SWU, LQ_STP_CON0); -+ lq_stp_w32(0, LQ_STP_CON1); -+ -+ /* rising or falling edge */ -+ lq_stp_w32_mask(LQ_STP_EDGE_MASK, LQ_STP_FALLING, LQ_STP_CON0); -+ -+ /* per default stp 15-0 are set */ -+ lq_stp_w32_mask(0, LQ_STP_GROUP0, LQ_STP_CON1); -+ -+ /* stp are update periodically by the FPID */ -+ lq_stp_w32_mask(LQ_STP_UPD_MASK, LQ_STP_UPD_SRC_FPI, LQ_STP_CON1); -+ -+ /* set stp update speed */ -+ lq_stp_w32_mask(LQ_STP_MASK, LQ_STP_8HZ, LQ_STP_CON1); -+ -+ /* adsl 0 and 1 stp are updated by the arc */ -+ lq_stp_w32_mask(0, LQ_STP_ADSL_SRC, LQ_STP_CON0); -+ -+ lq_pmu_enable(PMU_LED); -+ return 0; -+} -+ -+static int -+lq_stp_probe(struct platform_device *pdev) -+{ -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ int ret = 0; -+ if (!res) -+ return -ENOENT; -+ res = request_mem_region(res->start, resource_size(res), -+ dev_name(&pdev->dev)); -+ if (!res) -+ return -EBUSY; -+ virt = ioremap_nocache(res->start, resource_size(res)); -+ if(!virt) -+ { -+ ret = -ENOMEM; -+ goto err_release_mem_region; -+ } -+ ret = gpiochip_add(&lq_stp_chip); -+ if(!ret) -+ return lq_stp_hw_init(); -+ -+ iounmap(virt); -+err_release_mem_region: -+ release_mem_region(res->start, resource_size(res)); -+ return ret; -+} -+ -+static struct platform_driver lq_stp_driver = { -+ .probe = lq_stp_probe, -+ .driver = { -+ .name = "lq_stp", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+int __init -+init_lq_stp(void) -+{ -+ int ret = platform_driver_register(&lq_stp_driver); -+ if (ret) -+ printk(KERN_INFO -+ "lq_stp: error registering platfom driver"); -+ return ret; -+} -+ -+postcore_initcall(init_lq_stp); ---- /dev/null -+++ b/arch/mips/lantiq/xway/mach-easy4010.c -@@ -0,0 +1,82 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <linux/gpio.h> -+#include <linux/gpio_buttons.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+ -+#include <machine.h> -+ -+#include <xway.h> -+#include <lantiq_platform.h> -+ -+#include "devices.h" -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition easy4010_partitions[] = -+{ -+ { -+ .name = "uboot", -+ .offset = 0x0, -+ .size = 0x20000, -+ }, -+ { -+ .name = "uboot_env", -+ .offset = 0x20000, -+ .size = 0x10000, -+ }, -+ { -+ .name = "linux", -+ .offset = 0x30000, -+ .size = 0x3D0000, -+ }, -+}; -+#endif -+ -+static struct physmap_flash_data easy4010_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .nr_parts = ARRAY_SIZE(easy4010_partitions), -+ .parts = easy4010_partitions, -+#endif -+}; -+ -+static struct lq_pci_data lq_pci_data = { -+ .clock = PCI_CLOCK_INT, -+ .gpio = PCI_GNT1 | PCI_REQ1, -+ .irq = { -+ [14] = INT_NUM_IM0_IRL0 + 22, -+ }, -+}; -+ -+static struct lq_eth_data lq_eth_data = { -+ .mii_mode = REV_MII_MODE, -+}; -+ -+static void __init -+easy4010_init(void) -+{ -+ lq_register_gpio(); -+ lq_register_gpio_stp(); -+ lq_register_asc(0); -+ lq_register_asc(1); -+ lq_register_nor(&easy4010_flash_data); -+ lq_register_wdt(); -+ lq_register_pci(&lq_pci_data); -+ lq_register_ethernet(&lq_eth_data); -+} -+ -+MIPS_MACHINE(LANTIQ_MACH_EASY4010, -+ "EASY4010", -+ "EASY4010 Eval Board", -+ easy4010_init); ---- /dev/null -+++ b/arch/mips/lantiq/xway/mach-easy50712.c -@@ -0,0 +1,82 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <linux/gpio.h> -+#include <linux/gpio_buttons.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+ -+#include <machine.h> -+ -+#include <xway.h> -+#include <lantiq_platform.h> -+ -+#include "devices.h" -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition easy50712_partitions[] = -+{ -+ { -+ .name = "uboot", -+ .offset = 0x0, -+ .size = 0x20000, -+ }, -+ { -+ .name = "uboot_env", -+ .offset = 0x20000, -+ .size = 0x10000, -+ }, -+ { -+ .name = "linux", -+ .offset = 0x30000, -+ .size = 0x3D0000, -+ }, -+}; -+#endif -+ -+static struct physmap_flash_data easy50712_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .nr_parts = ARRAY_SIZE(easy50712_partitions), -+ .parts = easy50712_partitions, -+#endif -+}; -+ -+static struct lq_pci_data lq_pci_data = { -+ .clock = PCI_CLOCK_INT, -+ .gpio = PCI_GNT1 | PCI_REQ1, -+ .irq = { -+ [14] = INT_NUM_IM0_IRL0 + 22, -+ }, -+}; -+ -+static struct lq_eth_data lq_eth_data = { -+ .mii_mode = REV_MII_MODE, -+}; -+ -+static void __init -+easy50712_init(void) -+{ -+ lq_register_asc(0); -+ lq_register_asc(1); -+ lq_register_gpio(); -+ lq_register_gpio_stp(); -+ lq_register_nor(&easy50712_flash_data); -+ lq_register_wdt(); -+ lq_register_pci(&lq_pci_data); -+ lq_register_ethernet(&lq_eth_data); -+} -+ -+MIPS_MACHINE(LANTIQ_MACH_EASY50712, -+ "EASY50712", -+ "EASY50712 Eval Board", -+ easy50712_init); ---- /dev/null -+++ b/arch/mips/lantiq/xway/mach-easy50812.c -@@ -0,0 +1,81 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <linux/gpio.h> -+#include <linux/gpio_buttons.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+ -+#include <machine.h> -+ -+#include <xway.h> -+#include <lantiq_platform.h> -+ -+#include "devices.h" -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition easy50812_partitions[] = -+{ -+ { -+ .name = "uboot", -+ .offset = 0x0, -+ .size = 0x40000, -+ }, -+ { -+ .name = "uboot_env", -+ .offset = 0x40000, -+ .size = 0x10000, -+ }, -+ { -+ .name = "linux", -+ .offset = 0x50000, -+ .size = 0x3B0000, -+ }, -+}; -+#endif -+ -+static struct physmap_flash_data easy50812_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .nr_parts = ARRAY_SIZE(easy50812_partitions), -+ .parts = easy50812_partitions, -+#endif -+}; -+ -+static struct lq_pci_data lq_pci_data = { -+ .clock = PCI_CLOCK_INT, -+ .gpio = PCI_GNT1 | PCI_REQ1, -+ .irq = { -+ [14] = INT_NUM_IM0_IRL0 + 22, -+ }, -+}; -+ -+static struct lq_eth_data lq_eth_data = { -+ .mii_mode = REV_MII_MODE, -+}; -+ -+static void __init -+easy50812_init(void) -+{ -+ lq_register_gpio(); -+ lq_register_asc(0); -+ lq_register_asc(1); -+ lq_register_nor(&easy50812_flash_data); -+ lq_register_wdt(); -+ lq_register_pci(&lq_pci_data); -+ lq_register_ethernet(&lq_eth_data); -+} -+ -+MIPS_MACHINE(LANTIQ_MACH_EASY50812, -+ "EASY50812", -+ "EASY50812 Eval Board", -+ easy50812_init); ---- /dev/null -+++ b/arch/mips/lantiq/xway/prom.c -@@ -0,0 +1,52 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/module.h> -+#include <linux/clk.h> -+#include <asm/bootinfo.h> -+#include <asm/time.h> -+ -+#include <xway.h> -+ -+#include "../prom.h" -+ -+#define SOC_DANUBE "Danube" -+#define SOC_TWINPASS "Twinpass" -+#define SOC_AR9 "AR9" -+ -+void __init -+lq_soc_detect(struct lq_soc_info *i) -+{ -+ i->partnum = (lq_r32(LQ_MPS_CHIPID) & 0x0FFFFFFF) >> 12; -+ i->rev = (lq_r32(LQ_MPS_CHIPID) & 0xF0000000) >> 28; -+ switch (i->partnum) -+ { -+ case SOC_ID_DANUBE1: -+ case SOC_ID_DANUBE2: -+ i->name = SOC_DANUBE; -+ i->type = SOC_TYPE_DANUBE; -+ break; -+ -+ case SOC_ID_TWINPASS: -+ i->name = SOC_TWINPASS; -+ i->type = SOC_TYPE_DANUBE; -+ break; -+ -+ case SOC_ID_ARX188: -+ case SOC_ID_ARX168: -+ case SOC_ID_ARX182: -+ i->name = SOC_AR9; -+ i->type = SOC_TYPE_AR9; -+ break; -+ -+ default: -+ printk(KERN_ERR "unknown chiprev : 0x%08X\n", i->partnum); -+ while(1) { }; -+ break; -+ } -+} ---- /dev/null -+++ b/arch/mips/lantiq/xway/devices.c -@@ -0,0 +1,336 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/string.h> -+#include <linux/mtd/physmap.h> -+#include <linux/kernel.h> -+#include <linux/reboot.h> -+#include <linux/platform_device.h> -+#include <linux/leds.h> -+#include <linux/etherdevice.h> -+#include <linux/reboot.h> -+#include <linux/time.h> -+#include <linux/io.h> -+#include <linux/gpio.h> -+#include <linux/gpio_buttons.h> -+#include <linux/leds.h> -+ -+#include <asm/bootinfo.h> -+#include <asm/irq.h> -+ -+#include <xway.h> -+#include <xway_irq.h> -+#include <lantiq_platform.h> -+ -+#define IRQ_RES(resname,irq) {.name=#resname,.start=(irq),.flags=IORESOURCE_IRQ} -+ -+/* gpio leds */ -+static struct gpio_led_platform_data lq_gpio_led_data; -+ -+static struct platform_device lq_gpio_leds = -+{ -+ .name = "leds-gpio", -+ .dev = { -+ .platform_data = (void *) &lq_gpio_led_data, -+ } -+}; -+ -+void __init -+lq_register_gpio_leds(struct gpio_led *leds, int cnt) -+{ -+ lq_gpio_led_data.leds = leds; -+ lq_gpio_led_data.num_leds = cnt; -+ platform_device_register(&lq_gpio_leds); -+} -+ -+/* gpio buttons */ -+static struct gpio_buttons_platform_data lq_gpio_buttons_platform_data; -+ -+static struct platform_device lq_gpio_buttons_platform_device = -+{ -+ .name = "gpio-buttons", -+ .id = 0, -+ .dev = { -+ .platform_data = (void *) &lq_gpio_buttons_platform_data, -+ }, -+}; -+ -+void __init -+lq_register_gpio_buttons(struct gpio_button *buttons, int cnt) -+{ -+ lq_gpio_buttons_platform_data.buttons = buttons; -+ lq_gpio_buttons_platform_data.nbuttons = cnt; -+ platform_device_register(&lq_gpio_buttons_platform_device); -+} -+ -+/* serial to parallel conversion */ -+static struct resource lq_stp_resource = -+{ -+ .name = "stp", -+ .start = LQ_STP_BASE, -+ .end = LQ_STP_BASE + LQ_STP_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+void __init -+lq_register_gpio_stp(void) -+{ -+ platform_device_register_simple("lq_stp", 0, &lq_stp_resource, 1); -+} -+ -+/* nor flash */ -+static struct resource lq_nor_resource = -+{ -+ .name = "nor", -+ .start = LQ_FLASH_START, -+ .end = LQ_FLASH_START + LQ_FLASH_MAX - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device lq_nor = -+{ -+ .name = "lq_nor", -+ .resource = &lq_nor_resource, -+ .num_resources = 1, -+}; -+ -+void __init -+lq_register_nor(struct physmap_flash_data *data) -+{ -+ lq_nor.dev.platform_data = data; -+ platform_device_register(&lq_nor); -+} -+ -+/* watchdog */ -+static struct resource lq_wdt_resource = -+{ -+ .name = "watchdog", -+ .start = LQ_WDT_BASE, -+ .end = LQ_WDT_BASE + LQ_WDT_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+void __init -+lq_register_wdt(void) -+{ -+ platform_device_register_simple("lq_wdt", 0, &lq_wdt_resource, 1); -+} -+ -+/* gpio */ -+static struct resource lq_gpio_resource[] = { -+ { -+ .name = "gpio0", -+ .start = LQ_GPIO0_BASE_ADDR, -+ .end = LQ_GPIO0_BASE_ADDR + LQ_GPIO_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .name = "gpio1", -+ .start = LQ_GPIO1_BASE_ADDR, -+ .end = LQ_GPIO1_BASE_ADDR + LQ_GPIO_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+void __init -+lq_register_gpio(void) -+{ -+ platform_device_register_simple("lq_gpio", 0, &lq_gpio_resource[0], 1); -+ platform_device_register_simple("lq_gpio", 1, &lq_gpio_resource[1], 1); -+} -+ -+/* pci */ -+static struct platform_device lq_pci = -+{ -+ .name = "lq_pci", -+ .num_resources = 0, -+}; -+ -+void __init -+lq_register_pci(struct lq_pci_data *data) -+{ -+ lq_pci.dev.platform_data = data; -+ platform_device_register(&lq_pci); -+} -+ -+/* ebu */ -+static struct resource lq_ebu_resource = -+{ -+ .name = "gpio_ebu", -+ .start = LQ_EBU_GPIO_START, -+ .end = LQ_EBU_GPIO_START + LQ_EBU_GPIO_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device lq_ebu = -+{ -+ .name = "lq_ebu", -+ .resource = &lq_ebu_resource, -+ .num_resources = 1, -+}; -+ -+void __init -+lq_register_gpio_ebu(unsigned int value) -+{ -+ lq_ebu.dev.platform_data = (void*) value; -+ platform_device_register(&lq_ebu); -+} -+ -+/* ethernet */ -+unsigned char lq_ethaddr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -+ -+static int __init -+lq_set_ethaddr(char *str) -+{ -+ sscanf(&str[8], "0%02hhx:0%02hhx:0%02hhx:0%02hhx:0%02hhx:0%02hhx", -+ &lq_ethaddr[0], &lq_ethaddr[1], &lq_ethaddr[2], -+ &lq_ethaddr[3], &lq_ethaddr[4], &lq_ethaddr[5]); -+ return 0; -+} -+__setup("ethaddr=", lq_set_ethaddr); -+ -+static struct resource lq_ethernet_resources = -+{ -+ .name = "etop", -+ .start = LQ_PPE32_BASE_ADDR, -+ .end = LQ_PPE32_BASE_ADDR + LQ_PPE32_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device lq_ethernet = -+{ -+ .name = "lq_etop", -+ .resource = &lq_ethernet_resources, -+ .num_resources = 1, -+}; -+ -+void __init -+lq_register_ethernet(struct lq_eth_data *eth) -+{ -+ if(!eth) -+ return; -+ if(!eth->mac) -+ eth->mac = lq_ethaddr; -+ if(!is_valid_ether_addr(eth->mac)) -+ random_ether_addr(eth->mac); -+ lq_ethernet.dev.platform_data = eth; -+ platform_device_register(&lq_ethernet); -+} -+ -+/* tapi */ -+static struct resource mps_resources[] = { -+ { -+ .name = "voice-mem", -+ .flags = IORESOURCE_MEM, -+ .start = 0x1f107000, -+ .end = 0x1f1073ff, -+ }, -+ { -+ .name = "voice-mailbox", -+ .flags = IORESOURCE_MEM, -+ .start = 0x1f200000, -+ .end = 0x1f2007ff, -+ }, -+}; -+ -+static struct platform_device mps_device = { -+ .name = "mps", -+ .resource = mps_resources, -+ .num_resources = ARRAY_SIZE(mps_resources), -+}; -+ -+static struct platform_device vmmc_device = { -+ .name = "vmmc", -+ .dev = { -+ .parent = &mps_device.dev, -+ }, -+}; -+ -+static unsigned int *cp1_base; -+unsigned int* -+lq_get_cp1_base(void) -+{ -+ return cp1_base; -+} -+EXPORT_SYMBOL(lq_get_cp1_base); -+ -+void __init -+lq_register_tapi(void) -+{ -+#define CP1_SIZE (1 << 20) -+ dma_addr_t dma; -+ mps_device.dev.platform_data = -+ cp1_base = -+ (void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC)); -+ mps_device.dev.platform_data = cp1_base; -+ platform_device_register(&mps_device); -+ platform_device_register(&vmmc_device); -+} -+ -+/* asc ports */ -+static struct resource lq_asc0_resources[] = -+{ -+ { -+ .start = LQ_ASC0_BASE, -+ .end = LQ_ASC0_BASE + LQ_ASC_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ_RES(tx, INT_NUM_IM3_IRL0), -+ IRQ_RES(rx, INT_NUM_IM3_IRL0 + 1), -+ IRQ_RES(err, INT_NUM_IM3_IRL0 + 2), -+}; -+ -+static struct resource lq_asc1_resources[] = -+{ -+ { -+ .start = LQ_ASC1_BASE, -+ .end = LQ_ASC1_BASE + LQ_ASC_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ IRQ_RES(tx, INT_NUM_IM3_IRL0 + 8), -+ IRQ_RES(rx, INT_NUM_IM3_IRL0 + 9), -+ IRQ_RES(err, INT_NUM_IM3_IRL0 + 10), -+}; -+ -+void __init -+lq_register_asc(int port) -+{ -+ switch (port) { -+ case 0: -+ platform_device_register_simple("lq_asc", 0, -+ lq_asc0_resources, ARRAY_SIZE(lq_asc0_resources)); -+ break; -+ case 1: -+ platform_device_register_simple("lq_asc", 1, -+ lq_asc1_resources, ARRAY_SIZE(lq_asc1_resources)); -+ break; -+ default: -+ break; -+ } -+} -+ -+void __init -+lq_register_crypto(const char *name) -+{ -+ platform_device_register_simple(name, 0, 0, 0); -+} -+ -+/* madwifi */ -+int lantiq_emulate_madwifi_eep = 0; -+EXPORT_SYMBOL(lantiq_emulate_madwifi_eep); -+ -+void __init -+lq_register_madwifi_eep(void) -+{ -+ lantiq_emulate_madwifi_eep = 1; -+} -+ -+ -+ ---- /dev/null -+++ b/arch/mips/lantiq/xway/devices.h -@@ -0,0 +1,28 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#ifndef _LQ_DEVICES_H__ -+#define _LQ_DEVICES_H__ -+ -+#include <lantiq_platform.h> -+#include <xway_irq.h> -+ -+extern void __init lq_register_gpio(void); -+extern void __init lq_register_gpio_stp(void); -+extern void __init lq_register_gpio_ebu(unsigned int value); -+extern void __init lq_register_gpio_leds(struct gpio_led *leds, int cnt); -+extern void __init lq_register_pci(struct lq_pci_data *data); -+extern void __init lq_register_nor(struct physmap_flash_data *data); -+extern void __init lq_register_tapi(void); -+extern void __init lq_register_madwifi_eep(void); -+extern void __init lq_register_wdt(void); -+extern void __init lq_register_ethernet(struct lq_eth_data *eth); -+extern void __init lq_register_asc(int port); -+extern void __init lq_register_gpio_buttons(struct gpio_button *buttons, int cnt); -+ -+#endif ---- /dev/null -+++ b/arch/mips/lantiq/xway/dma.c -@@ -0,0 +1,701 @@ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/string.h> -+#include <linux/timer.h> -+#include <linux/fs.h> -+#include <linux/errno.h> -+#include <linux/stat.h> -+#include <linux/mm.h> -+#include <linux/tty.h> -+#include <linux/selection.h> -+#include <linux/kmod.h> -+#include <linux/vmalloc.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/uaccess.h> -+#include <linux/errno.h> -+#include <linux/io.h> -+ -+#include <xway.h> -+#include <xway_irq.h> -+#include <xway_dma.h> -+ -+#define LQ_DMA_CS ((u32 *)(LQ_DMA_BASE_ADDR + 0x18)) -+#define LQ_DMA_CIE ((u32 *)(LQ_DMA_BASE_ADDR + 0x2C)) -+#define LQ_DMA_IRNEN ((u32 *)(LQ_DMA_BASE_ADDR + 0xf4)) -+#define LQ_DMA_CCTRL ((u32 *)(LQ_DMA_BASE_ADDR + 0x1C)) -+#define LQ_DMA_CIS ((u32 *)(LQ_DMA_BASE_ADDR + 0x28)) -+#define LQ_DMA_CDLEN ((u32 *)(LQ_DMA_BASE_ADDR + 0x24)) -+#define LQ_DMA_PS ((u32 *)(LQ_DMA_BASE_ADDR + 0x40)) -+#define LQ_DMA_PCTRL ((u32 *)(LQ_DMA_BASE_ADDR + 0x44)) -+#define LQ_DMA_CTRL ((u32 *)(LQ_DMA_BASE_ADDR + 0x10)) -+#define LQ_DMA_CPOLL ((u32 *)(LQ_DMA_BASE_ADDR + 0x14)) -+#define LQ_DMA_CDBA ((u32 *)(LQ_DMA_BASE_ADDR + 0x20)) -+ -+/*25 descriptors for each dma channel,4096/8/20=25.xx*/ -+#define LQ_DMA_DESCRIPTOR_OFFSET 25 -+ -+#define MAX_DMA_DEVICE_NUM 6 /*max ports connecting to dma */ -+#define MAX_DMA_CHANNEL_NUM 20 /*max dma channels */ -+#define DMA_INT_BUDGET 100 /*budget for interrupt handling */ -+#define DMA_POLL_COUNTER 4 /*fix me, set the correct counter value here! */ -+ -+extern void lq_mask_and_ack_irq(unsigned int irq_nr); -+extern void lq_enable_irq(unsigned int irq_nr); -+extern void lq_disable_irq(unsigned int irq_nr); -+ -+u64 *g_desc_list; -+struct dma_device_info dma_devs[MAX_DMA_DEVICE_NUM]; -+struct dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM]; -+ -+static const char *global_device_name[MAX_DMA_DEVICE_NUM] = -+ { "PPE", "DEU", "SPI", "SDIO", "MCTRL0", "MCTRL1" }; -+ -+struct dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = { -+ {"PPE", LQ_DMA_RX, 0, LQ_DMA_CH0_INT, 0}, -+ {"PPE", LQ_DMA_TX, 0, LQ_DMA_CH1_INT, 0}, -+ {"PPE", LQ_DMA_RX, 1, LQ_DMA_CH2_INT, 1}, -+ {"PPE", LQ_DMA_TX, 1, LQ_DMA_CH3_INT, 1}, -+ {"PPE", LQ_DMA_RX, 2, LQ_DMA_CH4_INT, 2}, -+ {"PPE", LQ_DMA_TX, 2, LQ_DMA_CH5_INT, 2}, -+ {"PPE", LQ_DMA_RX, 3, LQ_DMA_CH6_INT, 3}, -+ {"PPE", LQ_DMA_TX, 3, LQ_DMA_CH7_INT, 3}, -+ {"DEU", LQ_DMA_RX, 0, LQ_DMA_CH8_INT, 0}, -+ {"DEU", LQ_DMA_TX, 0, LQ_DMA_CH9_INT, 0}, -+ {"DEU", LQ_DMA_RX, 1, LQ_DMA_CH10_INT, 1}, -+ {"DEU", LQ_DMA_TX, 1, LQ_DMA_CH11_INT, 1}, -+ {"SPI", LQ_DMA_RX, 0, LQ_DMA_CH12_INT, 0}, -+ {"SPI", LQ_DMA_TX, 0, LQ_DMA_CH13_INT, 0}, -+ {"SDIO", LQ_DMA_RX, 0, LQ_DMA_CH14_INT, 0}, -+ {"SDIO", LQ_DMA_TX, 0, LQ_DMA_CH15_INT, 0}, -+ {"MCTRL0", LQ_DMA_RX, 0, LQ_DMA_CH16_INT, 0}, -+ {"MCTRL0", LQ_DMA_TX, 0, LQ_DMA_CH17_INT, 0}, -+ {"MCTRL1", LQ_DMA_RX, 1, LQ_DMA_CH18_INT, 1}, -+ {"MCTRL1", LQ_DMA_TX, 1, LQ_DMA_CH19_INT, 1} -+}; -+ -+struct dma_chan_map *chan_map = default_dma_map; -+volatile u32 g_lq_dma_int_status; -+volatile int g_lq_dma_in_process; /* 0=not in process, 1=in process */ -+ -+void do_dma_tasklet(unsigned long); -+DECLARE_TASKLET(dma_tasklet, do_dma_tasklet, 0); -+ -+u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) -+{ -+ u8 *buffer = kmalloc(len * sizeof(u8), GFP_KERNEL); -+ -+ *byte_offset = 0; -+ -+ return buffer; -+} -+ -+void common_buffer_free(u8 *dataptr, void *opt) -+{ -+ kfree(dataptr); -+} -+ -+void enable_ch_irq(struct dma_channel_info *pCh) -+{ -+ int chan_no = (int)(pCh - dma_chan); -+ unsigned long flag; -+ -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(0x4a, LQ_DMA_CIE); -+ lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN); -+ local_irq_restore(flag); -+ lq_enable_irq(pCh->irq); -+} -+ -+void disable_ch_irq(struct dma_channel_info *pCh) -+{ -+ unsigned long flag; -+ int chan_no = (int) (pCh - dma_chan); -+ -+ local_irq_save(flag); -+ g_lq_dma_int_status &= ~(1 << chan_no); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(0, LQ_DMA_CIE); -+ lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN); -+ local_irq_restore(flag); -+ lq_mask_and_ack_irq(pCh->irq); -+} -+ -+void open_chan(struct dma_channel_info *pCh) -+{ -+ unsigned long flag; -+ int chan_no = (int)(pCh - dma_chan); -+ -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) | 1, LQ_DMA_CCTRL); -+ if (pCh->dir == LQ_DMA_RX) -+ enable_ch_irq(pCh); -+ local_irq_restore(flag); -+} -+ -+void close_chan(struct dma_channel_info *pCh) -+{ -+ unsigned long flag; -+ int chan_no = (int) (pCh - dma_chan); -+ -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL); -+ disable_ch_irq(pCh); -+ local_irq_restore(flag); -+} -+ -+void reset_chan(struct dma_channel_info *pCh) -+{ -+ int chan_no = (int) (pCh - dma_chan); -+ -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL); -+} -+ -+void rx_chan_intr_handler(int chan_no) -+{ -+ struct dma_device_info *pDev = (struct dma_device_info *)dma_chan[chan_no].dma_dev; -+ struct dma_channel_info *pCh = &dma_chan[chan_no]; -+ struct rx_desc *rx_desc_p; -+ int tmp; -+ unsigned long flag; -+ -+ /*handle command complete interrupt */ -+ rx_desc_p = (struct rx_desc *)pCh->desc_base + pCh->curr_desc; -+ if (rx_desc_p->status.field.OWN == CPU_OWN -+ && rx_desc_p->status.field.C -+ && rx_desc_p->status.field.data_length < 1536){ -+ /* Every thing is correct, then we inform the upper layer */ -+ pDev->current_rx_chan = pCh->rel_chan_no; -+ if (pDev->intr_handler) -+ pDev->intr_handler(pDev, RCV_INT); -+ pCh->weight--; -+ } else { -+ local_irq_save(flag); -+ tmp = lq_r32(LQ_DMA_CS); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(lq_r32(LQ_DMA_CIS) | 0x7e, LQ_DMA_CIS); -+ lq_w32(tmp, LQ_DMA_CS); -+ g_lq_dma_int_status &= ~(1 << chan_no); -+ local_irq_restore(flag); -+ lq_enable_irq(dma_chan[chan_no].irq); -+ } -+} -+ -+inline void tx_chan_intr_handler(int chan_no) -+{ -+ struct dma_device_info *pDev = (struct dma_device_info *)dma_chan[chan_no].dma_dev; -+ struct dma_channel_info *pCh = &dma_chan[chan_no]; -+ int tmp; -+ unsigned long flag; -+ -+ local_irq_save(flag); -+ tmp = lq_r32(LQ_DMA_CS); -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(lq_r32(LQ_DMA_CIS) | 0x7e, LQ_DMA_CIS); -+ lq_w32(tmp, LQ_DMA_CS); -+ g_lq_dma_int_status &= ~(1 << chan_no); -+ local_irq_restore(flag); -+ pDev->current_tx_chan = pCh->rel_chan_no; -+ if (pDev->intr_handler) -+ pDev->intr_handler(pDev, TRANSMIT_CPT_INT); -+} -+ -+void do_dma_tasklet(unsigned long unused) -+{ -+ int i; -+ int chan_no = 0; -+ int budget = DMA_INT_BUDGET; -+ int weight = 0; -+ unsigned long flag; -+ -+ while (g_lq_dma_int_status) { -+ if (budget-- < 0) { -+ tasklet_schedule(&dma_tasklet); -+ return; -+ } -+ chan_no = -1; -+ weight = 0; -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) { -+ if ((g_lq_dma_int_status & (1 << i)) && dma_chan[i].weight > 0) { -+ if (dma_chan[i].weight > weight) { -+ chan_no = i; -+ weight = dma_chan[chan_no].weight; -+ } -+ } -+ } -+ -+ if (chan_no >= 0) { -+ if (chan_map[chan_no].dir == LQ_DMA_RX) -+ rx_chan_intr_handler(chan_no); -+ else -+ tx_chan_intr_handler(chan_no); -+ } else { -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) -+ dma_chan[i].weight = dma_chan[i].default_weight; -+ } -+ } -+ -+ local_irq_save(flag); -+ g_lq_dma_in_process = 0; -+ if (g_lq_dma_int_status) { -+ g_lq_dma_in_process = 1; -+ tasklet_schedule(&dma_tasklet); -+ } -+ local_irq_restore(flag); -+} -+ -+irqreturn_t dma_interrupt(int irq, void *dev_id) -+{ -+ struct dma_channel_info *pCh; -+ int chan_no = 0; -+ int tmp; -+ -+ pCh = (struct dma_channel_info *)dev_id; -+ chan_no = (int)(pCh - dma_chan); -+ if (chan_no < 0 || chan_no > 19) -+ BUG(); -+ -+ tmp = lq_r32(LQ_DMA_IRNEN); -+ lq_w32(0, LQ_DMA_IRNEN); -+ g_lq_dma_int_status |= 1 << chan_no; -+ lq_w32(tmp, LQ_DMA_IRNEN); -+ lq_mask_and_ack_irq(irq); -+ -+ if (!g_lq_dma_in_process) { -+ g_lq_dma_in_process = 1; -+ tasklet_schedule(&dma_tasklet); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+struct dma_device_info *dma_device_reserve(char *dev_name) -+{ -+ int i; -+ -+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) { -+ if (strcmp(dev_name, dma_devs[i].device_name) == 0) { -+ if (dma_devs[i].reserved) -+ return NULL; -+ dma_devs[i].reserved = 1; -+ break; -+ } -+ } -+ -+ return &dma_devs[i]; -+} -+EXPORT_SYMBOL(dma_device_reserve); -+ -+void dma_device_release(struct dma_device_info *dev) -+{ -+ dev->reserved = 0; -+} -+EXPORT_SYMBOL(dma_device_release); -+ -+void dma_device_register(struct dma_device_info *dev) -+{ -+ int i, j; -+ int chan_no = 0; -+ u8 *buffer; -+ int byte_offset; -+ unsigned long flag; -+ struct dma_device_info *pDev; -+ struct dma_channel_info *pCh; -+ struct rx_desc *rx_desc_p; -+ struct tx_desc *tx_desc_p; -+ -+ for (i = 0; i < dev->max_tx_chan_num; i++) { -+ pCh = dev->tx_chan[i]; -+ if (pCh->control == LQ_DMA_CH_ON) { -+ chan_no = (int)(pCh - dma_chan); -+ for (j = 0; j < pCh->desc_len; j++) { -+ tx_desc_p = (struct tx_desc *)pCh->desc_base + j; -+ memset(tx_desc_p, 0, sizeof(struct tx_desc)); -+ } -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ /* check if the descriptor length is changed */ -+ if (lq_r32(LQ_DMA_CDLEN) != pCh->desc_len) -+ lq_w32(pCh->desc_len, LQ_DMA_CDLEN); -+ -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL); -+ while (lq_r32(LQ_DMA_CCTRL) & 2) -+ ; -+ lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN); -+ lq_w32(0x30100, LQ_DMA_CCTRL); /* reset and enable channel,enable channel later */ -+ local_irq_restore(flag); -+ } -+ } -+ -+ for (i = 0; i < dev->max_rx_chan_num; i++) { -+ pCh = dev->rx_chan[i]; -+ if (pCh->control == LQ_DMA_CH_ON) { -+ chan_no = (int)(pCh - dma_chan); -+ -+ for (j = 0; j < pCh->desc_len; j++) { -+ rx_desc_p = (struct rx_desc *)pCh->desc_base + j; -+ pDev = (struct dma_device_info *)(pCh->dma_dev); -+ buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void *)&(pCh->opt[j])); -+ if (!buffer) -+ break; -+ -+ dma_cache_inv((unsigned long) buffer, pCh->packet_size); -+ -+ rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer); -+ rx_desc_p->status.word = 0; -+ rx_desc_p->status.field.byte_offset = byte_offset; -+ rx_desc_p->status.field.OWN = DMA_OWN; -+ rx_desc_p->status.field.data_length = pCh->packet_size; -+ } -+ -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ /* check if the descriptor length is changed */ -+ if (lq_r32(LQ_DMA_CDLEN) != pCh->desc_len) -+ lq_w32(pCh->desc_len, LQ_DMA_CDLEN); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) | 2, LQ_DMA_CCTRL); -+ while (lq_r32(LQ_DMA_CCTRL) & 2) -+ ; -+ lq_w32(0x0a, LQ_DMA_CIE); /* fix me, should enable all the interrupts here? */ -+ lq_w32(lq_r32(LQ_DMA_IRNEN) | (1 << chan_no), LQ_DMA_IRNEN); -+ lq_w32(0x30000, LQ_DMA_CCTRL); -+ local_irq_restore(flag); -+ lq_enable_irq(dma_chan[chan_no].irq); -+ } -+ } -+} -+EXPORT_SYMBOL(dma_device_register); -+ -+void dma_device_unregister(struct dma_device_info *dev) -+{ -+ int i, j; -+ int chan_no; -+ struct dma_channel_info *pCh; -+ struct rx_desc *rx_desc_p; -+ struct tx_desc *tx_desc_p; -+ unsigned long flag; -+ -+ for (i = 0; i < dev->max_tx_chan_num; i++) { -+ pCh = dev->tx_chan[i]; -+ if (pCh->control == LQ_DMA_CH_ON) { -+ chan_no = (int)(dev->tx_chan[i] - dma_chan); -+ local_irq_save(flag); -+ lq_w32(chan_no, LQ_DMA_CS); -+ pCh->curr_desc = 0; -+ pCh->prev_desc = 0; -+ pCh->control = LQ_DMA_CH_OFF; -+ lq_w32(0, LQ_DMA_CIE); /* fix me, should disable all the interrupts here? */ -+ lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN); /* disable interrupts */ -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL); -+ while (lq_r32(LQ_DMA_CCTRL) & 1) -+ ; -+ local_irq_restore(flag); -+ -+ for (j = 0; j < pCh->desc_len; j++) { -+ tx_desc_p = (struct tx_desc *)pCh->desc_base + j; -+ if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C) -+ || (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0)) { -+ dev->buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), (void *)pCh->opt[j]); -+ } -+ tx_desc_p->status.field.OWN = CPU_OWN; -+ memset(tx_desc_p, 0, sizeof(struct tx_desc)); -+ } -+ /* TODO should free buffer that is not transferred by dma */ -+ } -+ } -+ -+ for (i = 0; i < dev->max_rx_chan_num; i++) { -+ pCh = dev->rx_chan[i]; -+ chan_no = (int)(dev->rx_chan[i] - dma_chan); -+ lq_disable_irq(pCh->irq); -+ -+ local_irq_save(flag); -+ g_lq_dma_int_status &= ~(1 << chan_no); -+ pCh->curr_desc = 0; -+ pCh->prev_desc = 0; -+ pCh->control = LQ_DMA_CH_OFF; -+ -+ lq_w32(chan_no, LQ_DMA_CS); -+ lq_w32(0, LQ_DMA_CIE); /* fix me, should disable all the interrupts here? */ -+ lq_w32(lq_r32(LQ_DMA_IRNEN) & ~(1 << chan_no), LQ_DMA_IRNEN); /* disable interrupts */ -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~1, LQ_DMA_CCTRL); -+ while (lq_r32(LQ_DMA_CCTRL) & 1) -+ ; -+ -+ local_irq_restore(flag); -+ for (j = 0; j < pCh->desc_len; j++) { -+ rx_desc_p = (struct rx_desc *) pCh->desc_base + j; -+ if ((rx_desc_p->status.field.OWN == CPU_OWN -+ && rx_desc_p->status.field.C) -+ || (rx_desc_p->status.field.OWN == DMA_OWN -+ && rx_desc_p->status.field.data_length > 0)) { -+ dev->buffer_free((u8 *) -+ __va(rx_desc_p->Data_Pointer), -+ (void *) pCh->opt[j]); -+ } -+ } -+ } -+} -+EXPORT_SYMBOL(dma_device_unregister); -+ -+int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt) -+{ -+ u8 *buf; -+ int len; -+ int byte_offset = 0; -+ void *p = NULL; -+ struct dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan]; -+ struct rx_desc *rx_desc_p; -+ -+ /* get the rx data first */ -+ rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc; -+ if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C)) -+ return 0; -+ -+ buf = (u8 *) __va(rx_desc_p->Data_Pointer); -+ *(u32 *)dataptr = (u32)buf; -+ len = rx_desc_p->status.field.data_length; -+ -+ if (opt) -+ *(int *)opt = (int)pCh->opt[pCh->curr_desc]; -+ -+ /* replace with a new allocated buffer */ -+ buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p); -+ -+ if (buf) { -+ dma_cache_inv((unsigned long) buf, pCh->packet_size); -+ pCh->opt[pCh->curr_desc] = p; -+ wmb(); -+ -+ rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf); -+ rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size; -+ wmb(); -+ } else { -+ *(u32 *) dataptr = 0; -+ if (opt) -+ *(int *) opt = 0; -+ len = 0; -+ } -+ -+ /* increase the curr_desc pointer */ -+ pCh->curr_desc++; -+ if (pCh->curr_desc == pCh->desc_len) -+ pCh->curr_desc = 0; -+ -+ return len; -+} -+EXPORT_SYMBOL(dma_device_read); -+ -+int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, int len, void *opt) -+{ -+ unsigned long flag; -+ u32 tmp, byte_offset; -+ struct dma_channel_info *pCh; -+ int chan_no; -+ struct tx_desc *tx_desc_p; -+ local_irq_save(flag); -+ -+ pCh = dma_dev->tx_chan[dma_dev->current_tx_chan]; -+ chan_no = (int)(pCh - (struct dma_channel_info *) dma_chan); -+ -+ tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->prev_desc; -+ while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C) { -+ dma_dev->buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]); -+ memset(tx_desc_p, 0, sizeof(struct tx_desc)); -+ pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len); -+ tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->prev_desc; -+ } -+ tx_desc_p = (struct tx_desc *)pCh->desc_base + pCh->curr_desc; -+ /* Check whether this descriptor is available */ -+ if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C) { -+ /* if not, the tell the upper layer device */ -+ dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT); -+ local_irq_restore(flag); -+ printk(KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__); -+ -+ return 0; -+ } -+ pCh->opt[pCh->curr_desc] = opt; -+ /* byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */ -+ byte_offset = ((u32) CPHYSADDR((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4); -+ dma_cache_wback((unsigned long) dataptr, len); -+ wmb(); -+ tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset; -+ wmb(); -+ tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len; -+ wmb(); -+ -+ pCh->curr_desc++; -+ if (pCh->curr_desc == pCh->desc_len) -+ pCh->curr_desc = 0; -+ -+ /*Check whether this descriptor is available */ -+ tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc; -+ if (tx_desc_p->status.field.OWN == DMA_OWN) { -+ /*if not , the tell the upper layer device */ -+ dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT); -+ } -+ -+ lq_w32(chan_no, LQ_DMA_CS); -+ tmp = lq_r32(LQ_DMA_CCTRL); -+ -+ if (!(tmp & 1)) -+ pCh->open(pCh); -+ -+ local_irq_restore(flag); -+ -+ return len; -+} -+EXPORT_SYMBOL(dma_device_write); -+ -+int map_dma_chan(struct dma_chan_map *map) -+{ -+ int i, j; -+ int result; -+ -+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) -+ strcpy(dma_devs[i].device_name, global_device_name[i]); -+ -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) { -+ dma_chan[i].irq = map[i].irq; -+ result = request_irq(dma_chan[i].irq, dma_interrupt, IRQF_DISABLED, map[i].dev_name, (void *)&dma_chan[i]); -+ if (result) { -+ printk(KERN_WARNING "error, cannot get dma_irq!\n"); -+ free_irq(dma_chan[i].irq, (void *) &dma_interrupt); -+ -+ return -EFAULT; -+ } -+ } -+ -+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++) { -+ dma_devs[i].num_tx_chan = 0; /*set default tx channel number to be one */ -+ dma_devs[i].num_rx_chan = 0; /*set default rx channel number to be one */ -+ dma_devs[i].max_rx_chan_num = 0; -+ dma_devs[i].max_tx_chan_num = 0; -+ dma_devs[i].buffer_alloc = &common_buffer_alloc; -+ dma_devs[i].buffer_free = &common_buffer_free; -+ dma_devs[i].intr_handler = NULL; -+ dma_devs[i].tx_burst_len = 4; -+ dma_devs[i].rx_burst_len = 4; -+ if (i == 0) { -+ lq_w32(0, LQ_DMA_PS); -+ lq_w32(lq_r32(LQ_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), LQ_DMA_PCTRL); /*enable dma drop */ -+ } -+ -+ if (i == 1) { -+ lq_w32(1, LQ_DMA_PS); -+ lq_w32(0x14, LQ_DMA_PCTRL); /*deu port setting */ -+ } -+ -+ for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) { -+ dma_chan[j].byte_offset = 0; -+ dma_chan[j].open = &open_chan; -+ dma_chan[j].close = &close_chan; -+ dma_chan[j].reset = &reset_chan; -+ dma_chan[j].enable_irq = &enable_ch_irq; -+ dma_chan[j].disable_irq = &disable_ch_irq; -+ dma_chan[j].rel_chan_no = map[j].rel_chan_no; -+ dma_chan[j].control = LQ_DMA_CH_OFF; -+ dma_chan[j].default_weight = LQ_DMA_CH_DEFAULT_WEIGHT; -+ dma_chan[j].weight = dma_chan[j].default_weight; -+ dma_chan[j].curr_desc = 0; -+ dma_chan[j].prev_desc = 0; -+ } -+ -+ for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++) { -+ if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0) { -+ if (map[j].dir == LQ_DMA_RX) { -+ dma_chan[j].dir = LQ_DMA_RX; -+ dma_devs[i].max_rx_chan_num++; -+ dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j]; -+ dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri; -+ dma_chan[j].dma_dev = (void *)&dma_devs[i]; -+ } else if (map[j].dir == LQ_DMA_TX) { -+ /*TX direction */ -+ dma_chan[j].dir = LQ_DMA_TX; -+ dma_devs[i].max_tx_chan_num++; -+ dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j]; -+ dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri; -+ dma_chan[j].dma_dev = (void *)&dma_devs[i]; -+ } else { -+ printk(KERN_WARNING "WRONG DMA MAP!\n"); -+ } -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+void dma_chip_init(void) -+{ -+ int i; -+ -+ /* enable DMA from PMU */ -+ lq_pmu_enable(PMU_DMA); -+ -+ /* reset DMA */ -+ lq_w32(lq_r32(LQ_DMA_CTRL) | 1, LQ_DMA_CTRL); -+ -+ /* disable all interrupts */ -+ lq_w32(0, LQ_DMA_IRNEN); -+ -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) { -+ lq_w32(i, LQ_DMA_CS); -+ lq_w32(0x2, LQ_DMA_CCTRL); -+ lq_w32(0x80000040, LQ_DMA_CPOLL); -+ lq_w32(lq_r32(LQ_DMA_CCTRL) & ~0x1, LQ_DMA_CCTRL); -+ } -+} -+ -+int lq_dma_init(void) -+{ -+ int i; -+ -+ dma_chip_init(); -+ -+ if (map_dma_chan(default_dma_map)) -+ BUG(); -+ -+ g_desc_list = (u64 *)KSEG1ADDR(__get_free_page(GFP_DMA)); -+ -+ if (g_desc_list == NULL) { -+ printk(KERN_WARNING "no memory for desriptor\n"); -+ return -ENOMEM; -+ } -+ -+ memset(g_desc_list, 0, PAGE_SIZE); -+ -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) { -+ dma_chan[i].desc_base = (u32)g_desc_list + i * LQ_DMA_DESCRIPTOR_OFFSET * 8; -+ dma_chan[i].curr_desc = 0; -+ dma_chan[i].desc_len = LQ_DMA_DESCRIPTOR_OFFSET; -+ -+ lq_w32(i, LQ_DMA_CS); -+ lq_w32((u32)CPHYSADDR(dma_chan[i].desc_base), LQ_DMA_CDBA); -+ lq_w32(dma_chan[i].desc_len, LQ_DMA_CDLEN); -+ } -+ return 0; -+} -+ -+arch_initcall(lq_dma_init); -+ -+void dma_cleanup(void) -+{ -+ int i; -+ -+ free_page(KSEG0ADDR((unsigned long) g_desc_list)); -+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++) -+ free_irq(dma_chan[i].irq, (void *)&dma_interrupt); -+} -+ -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/mips/lantiq/xway/pmu.c -@@ -0,0 +1,36 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/version.h> -+ -+#include <xway.h> -+ -+#define LQ_PMU_PWDCR ((u32 *)(LQ_PMU_BASE_ADDR + 0x001C)) -+#define LQ_PMU_PWDSR ((u32 *)(LQ_PMU_BASE_ADDR + 0x0020)) -+ -+void -+lq_pmu_enable(unsigned int module) -+{ -+ int err = 1000000; -+ -+ lq_w32(lq_r32(LQ_PMU_PWDCR) & ~module, LQ_PMU_PWDCR); -+ while (--err && (lq_r32(LQ_PMU_PWDSR) & module)); -+ -+ if (!err) -+ panic("activating PMU module failed!"); -+} -+EXPORT_SYMBOL(lq_pmu_enable); -+ -+void -+lq_pmu_disable(unsigned int module) -+{ -+ lq_w32(lq_r32(LQ_PMU_PWDCR) | module, LQ_PMU_PWDCR); -+} -+EXPORT_SYMBOL(lq_pmu_disable); ---- /dev/null -+++ b/arch/mips/lantiq/xway/timer.c -@@ -0,0 +1,828 @@ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/init.h> -+#include <linux/uaccess.h> -+#include <linux/unistd.h> -+#include <linux/errno.h> -+#include <linux/interrupt.h> -+#include <linux/sched.h> -+ -+#include <asm/irq.h> -+#include <asm/div64.h> -+ -+#include <xway.h> -+#include <xway_irq.h> -+#include <lantiq_timer.h> -+ -+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 -+ -+#ifdef TIMER1A -+#define FIRST_TIMER TIMER1A -+#else -+#define FIRST_TIMER 2 -+#endif -+ -+/* -+ * GPTC divider is set or not. -+ */ -+#define GPTU_CLC_RMC_IS_SET 0 -+ -+/* -+ * Timer Interrupt (IRQ) -+ */ -+/* Must be adjusted when ICU driver is available */ -+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) -+ -+/* -+ * Bits Operation -+ */ -+#define GET_BITS(x, msb, lsb) \ -+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) -+#define SET_BITS(x, msb, lsb, value) \ -+ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ -+ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) -+ -+/* -+ * GPTU Register Mapping -+ */ -+#define LQ_GPTU (KSEG1 + 0x1E100A00) -+#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) -+#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) -+#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) -+#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) -+#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) -+ -+/* -+ * Clock Control Register -+ */ -+#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) -+#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) -+#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) -+#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) -+#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) -+#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) -+#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) -+ -+#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) -+#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) -+#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) -+ -+/* -+ * ID Register -+ */ -+#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) -+#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) -+#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) -+ -+/* -+ * Control Register of Timer/Counter nX -+ * n is the index of block (1 based index) -+ * X is either A or B -+ */ -+#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) -+#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) -+#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) -+#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) -+#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) -+#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ -+#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) -+#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) -+#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) -+#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) -+ -+#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) -+#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) -+#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) -+#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) -+#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) -+ -+#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) -+#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) -+ -+#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+ -+#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) -+#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) -+#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) -+#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) -+#define TIMER_FLAG_NONE_EDGE 0x0000 -+#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) -+#define TIMER_FLAG_REAL 0x0000 -+#define TIMER_FLAG_INVERT 0x0040 -+#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) -+#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) -+#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) -+#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 -+#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) -+#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) -+ -+struct timer_dev_timer { -+ unsigned int f_irq_on; -+ unsigned int irq; -+ unsigned int flag; -+ unsigned long arg1; -+ unsigned long arg2; -+}; -+ -+struct timer_dev { -+ struct mutex gptu_mutex; -+ unsigned int number_of_timers; -+ unsigned int occupation; -+ unsigned int f_gptu_on; -+ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; -+}; -+ -+static long gptu_ioctl(struct file *, unsigned int, unsigned long); -+static int gptu_open(struct inode *, struct file *); -+static int gptu_release(struct inode *, struct file *); -+ -+static struct file_operations gptu_fops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = gptu_ioctl, -+ .open = gptu_open, -+ .release = gptu_release -+}; -+ -+static struct miscdevice gptu_miscdev = { -+ .minor = MISC_DYNAMIC_MINOR, -+ .name = "gptu", -+ .fops = &gptu_fops, -+}; -+ -+static struct timer_dev timer_dev; -+ -+static irqreturn_t timer_irq_handler(int irq, void *p) -+{ -+ unsigned int timer; -+ unsigned int flag; -+ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; -+ -+ timer = irq - TIMER_INTERRUPT; -+ if (timer < timer_dev.number_of_timers -+ && dev_timer == &timer_dev.timer[timer]) { -+ /* Clear interrupt. */ -+ lq_w32(1 << timer, LQ_GPTU_IRNCR); -+ -+ /* Call user hanler or signal. */ -+ flag = dev_timer->flag; -+ if (!(timer & 0x01) -+ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ /* 16-bit timer or timer A of 32-bit timer */ -+ switch (TIMER_FLAG_MASK_HANDLE(flag)) { -+ case TIMER_FLAG_CALLBACK_IN_IRQ: -+ case TIMER_FLAG_CALLBACK_IN_HB: -+ if (dev_timer->arg1) -+ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); -+ break; -+ case TIMER_FLAG_SIGNAL: -+ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); -+ break; -+ } -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+static inline void lq_enable_gptu(void) -+{ -+ lq_pmu_enable(PMU_GPT); -+ -+ /* Set divider as 1, disable write protection for SPEN, enable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x01) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(1) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(0); -+} -+ -+static inline void lq_disable_gptu(void) -+{ -+ lq_w32(0x00, LQ_GPTU_IRNEN); -+ lq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ /* Set divider as 0, enable write protection for SPEN, disable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x00) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(0) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(1); -+ -+ lq_pmu_disable(PMU_GPT); -+} -+ -+int lq_request_timer(unsigned int timer, unsigned int flag, -+ unsigned long value, unsigned long arg1, unsigned long arg2) -+{ -+ int ret = 0; -+ unsigned int con_reg, irnen_reg; -+ int n, X; -+ -+ if (timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", -+ timer, flag, value); -+ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) -+ value &= 0xFFFF; -+ else -+ timer &= ~0x01; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ /* -+ * Allocate timer. -+ */ -+ if (timer < FIRST_TIMER) { -+ unsigned int mask; -+ unsigned int shift; -+ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ -+ unsigned int offset = TIMER2A; -+ -+ /* -+ * Pick up a free timer. -+ */ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ mask = 1 << offset; -+ shift = 1; -+ } else { -+ mask = 3 << offset; -+ shift = 2; -+ } -+ for (timer = offset; -+ timer < offset + timer_dev.number_of_timers; -+ timer += shift, mask <<= shift) -+ if (!(timer_dev.occupation & mask)) { -+ timer_dev.occupation |= mask; -+ break; -+ } -+ if (timer >= offset + timer_dev.number_of_timers) { -+ printk("failed![%d]\n", __LINE__); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } else -+ ret = timer; -+ } else { -+ register unsigned int mask; -+ -+ /* -+ * Check if the requested timer is free. -+ */ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if ((timer_dev.occupation & mask)) { -+ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", -+ __LINE__, mask, timer_dev.occupation); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EBUSY; -+ } else { -+ timer_dev.occupation |= mask; -+ ret = 0; -+ } -+ } -+ -+ /* -+ * Prepare control register value. -+ */ -+ switch (TIMER_FLAG_MASK_EDGE(flag)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : -+ GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : -+ GPTU_CON_SRC_EG_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_SYNC(flag) == -+ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : -+ GPTU_CON_SYNC_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_INVERT(flag) == -+ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : -+ GPTU_CON_EXT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_STOP(flag) == -+ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_TYPE(flag) == -+ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : -+ GPTU_CON_CNT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_DIR(flag) == -+ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ /* -+ * Fill up running data. -+ */ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flag; -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; -+ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; -+ -+ /* -+ * Enable GPTU module. -+ */ -+ if (!timer_dev.f_gptu_on) { -+ lq_enable_gptu(); -+ timer_dev.f_gptu_on = 1; -+ } -+ -+ /* -+ * Enable IRQ. -+ */ -+ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = -+ (unsigned long) find_task_by_vpid((int) arg1); -+ -+ irnen_reg = 1 << (timer - FIRST_TIMER); -+ -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL -+ || (TIMER_FLAG_MASK_HANDLE(flag) == -+ TIMER_FLAG_CALLBACK_IN_IRQ -+ && timer_dev.timer[timer - FIRST_TIMER].arg1)) { -+ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; -+ } -+ } else -+ irnen_reg = 0; -+ -+ /* -+ * Write config register, reload value and enable interrupt. -+ */ -+ n = timer >> 1; -+ X = timer & 0x01; -+ *LQ_GPTU_CON(n, X) = con_reg; -+ *LQ_GPTU_RELOAD(n, X) = value; -+ /* printk("reload value = %d\n", (u32)value); */ -+ *LQ_GPTU_IRNEN |= irnen_reg; -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ printk("successful!\n"); -+ return ret; -+} -+EXPORT_SYMBOL(lq_request_timer); -+ -+int lq_free_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ if (GPTU_CON_EN(n, X)) -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); -+ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); -+ -+ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { -+ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; -+ } -+ -+ timer_dev.occupation &= ~mask; -+ if (!timer_dev.occupation && timer_dev.f_gptu_on) { -+ lq_disable_gptu(); -+ timer_dev.f_gptu_on = 0; -+ } -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_free_timer); -+ -+int lq_start_timer(unsigned int timer, int is_resume) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_start_timer); -+ -+int lq_stop_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_stop_timer); -+ -+int lq_reset_counter_flags(u32 timer, u32 flags) -+{ -+ unsigned int oflag; -+ unsigned int mask, con_reg; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ oflag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ switch (TIMER_FLAG_MASK_EDGE(flags)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); -+ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); -+ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flags; -+ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_CON(n, X) = con_reg; -+ smp_wmb(); -+ printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X)); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return 0; -+} -+EXPORT_SYMBOL(lq_reset_counter_flags); -+ -+int lq_get_count_value(unsigned int timer, unsigned long *value) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *value = *LQ_GPTU_COUNT(n, X); -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_get_count_value); -+ -+u32 lq_cal_divider(unsigned long freq) -+{ -+ u64 module_freq, fpi = lq_get_fpi_bus_clock(2); -+ u32 clock_divider = 1; -+ module_freq = fpi * 1000; -+ do_div(module_freq, clock_divider * freq); -+ return module_freq; -+} -+EXPORT_SYMBOL(lq_cal_divider); -+ -+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, -+ int is_ext_src, unsigned int handle_flag, unsigned long arg1, -+ unsigned long arg2) -+{ -+ unsigned long divider; -+ unsigned int flag; -+ -+ divider = lq_cal_divider(freq); -+ if (divider == 0) -+ return -EINVAL; -+ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) -+ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) -+ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) -+ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN -+ | TIMER_FLAG_MASK_HANDLE(handle_flag); -+ -+ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", -+ timer, freq, divider); -+ return lq_request_timer(timer, flag, divider, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_timer); -+ -+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, -+ unsigned long arg1, unsigned long arg2) -+{ -+ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); -+ return lq_request_timer(timer, flag, reload, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_counter); -+ -+static long gptu_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret; -+ struct gptu_ioctl_param param; -+ -+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ copy_from_user(¶m, (void *) arg, sizeof(param)); -+ -+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER -+ || GPTU_SET_COUNTER) && param.timer < 2) -+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) -+ && !access_ok(VERIFY_WRITE, arg, -+ sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ -+ switch (cmd) { -+ case GPTU_REQUEST_TIMER: -+ ret = lq_request_timer(param.timer, param.flag, param.value, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_FREE_TIMER: -+ ret = lq_free_timer(param.timer); -+ break; -+ case GPTU_START_TIMER: -+ ret = lq_start_timer(param.timer, param.flag); -+ break; -+ case GPTU_STOP_TIMER: -+ ret = lq_stop_timer(param.timer); -+ break; -+ case GPTU_GET_COUNT_VALUE: -+ ret = lq_get_count_value(param.timer, ¶m.value); -+ if (!ret) -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ break; -+ case GPTU_CALCULATE_DIVIDER: -+ param.value = lq_cal_divider(param.value); -+ if (param.value == 0) -+ ret = -EINVAL; -+ else { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_TIMER: -+ ret = lq_set_timer(param.timer, param.value, -+ TIMER_FLAG_MASK_STOP(param.flag) != -+ TIMER_FLAG_ONCE ? 1 : 0, -+ TIMER_FLAG_MASK_SRC(param.flag) == -+ TIMER_FLAG_EXT_SRC ? 1 : 0, -+ TIMER_FLAG_MASK_HANDLE(param.flag) == -+ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : -+ TIMER_FLAG_NO_HANDLE, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_COUNTER: -+ lq_set_counter(param.timer, param.flag, param.value, 0, 0); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ default: -+ ret = -ENOTTY; -+ } -+ -+ return ret; -+} -+ -+static int gptu_open(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+static int gptu_release(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+int __init lq_gptu_init(void) -+{ -+ int ret; -+ unsigned int i; -+ -+ lq_w32(0, LQ_GPTU_IRNEN); -+ lq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ memset(&timer_dev, 0, sizeof(timer_dev)); -+ mutex_init(&timer_dev.gptu_mutex); -+ -+ lq_enable_gptu(); -+ timer_dev.number_of_timers = GPTU_ID_CFG * 2; -+ lq_disable_gptu(); -+ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) -+ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; -+ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); -+ -+ ret = misc_register(&gptu_miscdev); -+ if (ret) { -+ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); -+ return ret; -+ } else { -+ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); -+ } -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); -+ if (ret) { -+ for (; i >= 0; i--) -+ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); -+ misc_deregister(&gptu_miscdev); -+ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); -+ return ret; -+ } else { -+ timer_dev.timer[i].irq = TIMER_INTERRUPT + i; -+ disable_irq(timer_dev.timer[i].irq); -+ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); -+ } -+ } -+ -+ return 0; -+} -+ -+void __exit lq_gptu_exit(void) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ if (timer_dev.timer[i].f_irq_on) -+ disable_irq(timer_dev.timer[i].irq); -+ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); -+ } -+ lq_disable_gptu(); -+ misc_deregister(&gptu_miscdev); -+} -+ -+module_init(lq_gptu_init); -+module_exit(lq_gptu_exit); ---- /dev/null -+++ b/arch/mips/lantiq/xway/timer.h -@@ -0,0 +1,155 @@ -+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+ -+ -+/****************************************************************************** -+ Copyright (c) 2002, Infineon Technologies. All rights reserved. -+ -+ No Warranty -+ Because the program is licensed free of charge, there is no warranty for -+ the program, to the extent permitted by applicable law. Except when -+ otherwise stated in writing the copyright holders and/or other parties -+ provide the program "as is" without warranty of any kind, either -+ expressed or implied, including, but not limited to, the implied -+ warranties of merchantability and fitness for a particular purpose. The -+ entire risk as to the quality and performance of the program is with -+ you. should the program prove defective, you assume the cost of all -+ necessary servicing, repair or correction. -+ -+ In no event unless required by applicable law or agreed to in writing -+ will any copyright holder, or any other party who may modify and/or -+ redistribute the program as permitted above, be liable to you for -+ damages, including any general, special, incidental or consequential -+ damages arising out of the use or inability to use the program -+ (including but not limited to loss of data or data being rendered -+ inaccurate or losses sustained by you or third parties or a failure of -+ the program to operate with any other programs), even if such holder or -+ other party has been advised of the possibility of such damages. -+******************************************************************************/ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+/* -+ * Available Timer/Counter Index -+ */ -+#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) -+#define TIMER_ANY 0x00 -+#define TIMER1A TIMER(1, 0) -+#define TIMER1B TIMER(1, 1) -+#define TIMER2A TIMER(2, 0) -+#define TIMER2B TIMER(2, 1) -+#define TIMER3A TIMER(3, 0) -+#define TIMER3B TIMER(3, 1) -+ -+/* -+ * Flag of Timer/Counter -+ * These flags specify the way in which timer is configured. -+ */ -+/* Bit size of timer/counter. */ -+#define TIMER_FLAG_16BIT 0x0000 -+#define TIMER_FLAG_32BIT 0x0001 -+/* Switch between timer and counter. */ -+#define TIMER_FLAG_TIMER 0x0000 -+#define TIMER_FLAG_COUNTER 0x0002 -+/* Stop or continue when overflowing/underflowing. */ -+#define TIMER_FLAG_ONCE 0x0000 -+#define TIMER_FLAG_CYCLIC 0x0004 -+/* Count up or counter down. */ -+#define TIMER_FLAG_UP 0x0000 -+#define TIMER_FLAG_DOWN 0x0008 -+/* Count on specific level or edge. */ -+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 -+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 -+#define TIMER_FLAG_RISE_EDGE 0x0010 -+#define TIMER_FLAG_FALL_EDGE 0x0020 -+#define TIMER_FLAG_ANY_EDGE 0x0030 -+/* Signal is syncronous to module clock or not. */ -+#define TIMER_FLAG_UNSYNC 0x0000 -+#define TIMER_FLAG_SYNC 0x0080 -+/* Different interrupt handle type. */ -+#define TIMER_FLAG_NO_HANDLE 0x0000 -+#if defined(__KERNEL__) -+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 -+#endif // defined(__KERNEL__) -+#define TIMER_FLAG_SIGNAL 0x0300 -+/* Internal clock source or external clock source */ -+#define TIMER_FLAG_INT_SRC 0x0000 -+#define TIMER_FLAG_EXT_SRC 0x1000 -+ -+ -+/* -+ * ioctl Command -+ */ -+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ -+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ -+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ -+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ -+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ -+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ -+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ -+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ -+ -+/* -+ * Data Type Used to Call ioctl -+ */ -+struct gptu_ioctl_param { -+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field is ID of expected * -+ * timer/counter. If it's zero, a timer/counter would * -+ * be dynamically allocated and ID would be stored in * -+ * this field. * -+ * In command GPTU_GET_COUNT_VALUE, this field is * -+ * ignored. * -+ * In other command, this field is ID of timer/counter * -+ * allocated. */ -+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field contains flags to * -+ * specify how to configure timer/counter. * -+ * In command GPTU_START_TIMER, zero indicate start * -+ * and non-zero indicate resume timer/counter. * -+ * In other command, this field is ignored. */ -+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * -+ * init/reload value. * -+ * In command GPTU_SET_TIMER, this field contains * -+ * frequency (0.001Hz) of timer. * -+ * In command GPTU_GET_COUNT_VALUE, current count * -+ * value would be stored in this field. * -+ * In command GPTU_CALCULATE_DIVIDER, this field * -+ * contains frequency wanted, and after calculation, * -+ * divider would be stored in this field to overwrite * -+ * the frequency. * -+ * In other command, this field is ignored. */ -+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains process * -+ * ID to which signal would be sent. * -+ * In other command, this field is ignored. */ -+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains signal * -+ * number which would be sent. * -+ * In other command, this field is ignored. */ -+}; -+ -+/* -+ * #################################### -+ * Data Type -+ * #################################### -+ */ -+typedef void (*timer_callback)(unsigned long arg); -+ -+extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); -+extern int ifxmips_free_timer(unsigned int); -+extern int ifxmips_start_timer(unsigned int, int); -+extern int ifxmips_stop_timer(unsigned int); -+extern int ifxmips_reset_counter_flags(u32 timer, u32 flags); -+extern int ifxmips_get_count_value(unsigned int, unsigned long *); -+extern u32 ifxmips_cal_divider(unsigned long); -+extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); -+extern int ifxmips_set_counter(unsigned int timer, unsigned int flag, -+ u32 reload, unsigned long arg1, unsigned long arg2); -+ -+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ ---- /dev/null -+++ b/arch/mips/lantiq/xway/Makefile -@@ -0,0 +1,5 @@ -+obj-y := pmu.o prom.o dma.o timer.o reset.o clk-xway.o -+obj-y += gpio.o gpio_ebu.o gpio_leds.o devices.o -+obj-$(CONFIG_LANTIQ_MACH_EASY50812) += mach-easy50812.o -+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o -+obj-$(CONFIG_LANTIQ_MACH_EASY4010) += mach-easy4010.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/clk-xway.c -@@ -0,0 +1,219 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2007 Xu Liang, infineon -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/clk.h> -+ -+#include <asm/time.h> -+#include <asm/irq.h> -+#include <asm/div64.h> -+ -+#include <xway.h> -+ -+static unsigned int lq_ram_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; -+#define DDR_HZ lq_ram_clocks[lq_r32(LQ_CGU_SYS) & 0x3] -+ -+#define BASIC_FREQUENCY_1 35328000 -+#define BASIC_FREQUENCY_2 36000000 -+#define BASIS_REQUENCY_USB 12000000 -+ -+#define GET_BITS(x, msb, lsb) (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) -+ -+#define CGU_PLL0_PHASE_DIVIDER_ENABLE (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 31)) -+#define CGU_PLL0_BYPASS (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 30)) -+#define CGU_PLL0_CFG_DSMSEL (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 28)) -+#define CGU_PLL0_CFG_FRAC_EN (lq_r32(LQ_CGU_PLL0_CFG) & (1 << 27)) -+#define CGU_PLL1_SRC (lq_r32(LQ_CGU_PLL1_CFG) & (1 << 31)) -+#define CGU_PLL2_PHASE_DIVIDER_ENABLE (lq_r32(LQ_CGU_PLL2_CFG) & (1 << 20)) -+#define CGU_SYS_FPI_SEL (1 << 6) -+#define CGU_SYS_DDR_SEL 0x3 -+#define CGU_PLL0_SRC (1 << 29) -+ -+#define CGU_PLL0_CFG_PLLK GET_BITS(*LQ_CGU_PLL0_CFG, 26, 17) -+#define CGU_PLL0_CFG_PLLN GET_BITS(*LQ_CGU_PLL0_CFG, 12, 6) -+#define CGU_PLL0_CFG_PLLM GET_BITS(*LQ_CGU_PLL0_CFG, 5, 2) -+#define CGU_PLL2_SRC GET_BITS(*LQ_CGU_PLL2_CFG, 18, 17) -+#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(*LQ_CGU_PLL2_CFG, 16, 13) -+ -+#define LQ_GPTU_GPT_CLC ((u32 *)(LQ_GPTU_BASE_ADDR + 0x0000)) -+#define LQ_CGU_PLL0_CFG ((u32 *)(LQ_CGU_BASE_ADDR + 0x0004)) -+#define LQ_CGU_PLL1_CFG ((u32 *)(LQ_CGU_BASE_ADDR + 0x0008)) -+#define LQ_CGU_PLL2_CFG ((u32 *)(LQ_CGU_BASE_ADDR + 0x000C)) -+#define LQ_CGU_SYS ((u32 *)(LQ_CGU_BASE_ADDR + 0x0010)) -+#define LQ_CGU_UPDATE ((u32 *)(LQ_CGU_BASE_ADDR + 0x0014)) -+#define LQ_CGU_IF_CLK ((u32 *)(LQ_CGU_BASE_ADDR + 0x0018)) -+#define LQ_CGU_OSC_CON ((u32 *)(LQ_CGU_BASE_ADDR + 0x001C)) -+#define LQ_CGU_SMD ((u32 *)(LQ_CGU_BASE_ADDR + 0x0020)) -+#define LQ_CGU_CT1SR ((u32 *)(LQ_CGU_BASE_ADDR + 0x0028)) -+#define LQ_CGU_CT2SR ((u32 *)(LQ_CGU_BASE_ADDR + 0x002C)) -+#define LQ_CGU_PCMCR ((u32 *)(LQ_CGU_BASE_ADDR + 0x0030)) -+#define LQ_CGU_PCI_CR ((u32 *)(LQ_CGU_BASE_ADDR + 0x0034)) -+#define LQ_CGU_PD_PC ((u32 *)(LQ_CGU_BASE_ADDR + 0x0038)) -+#define LQ_CGU_FMR ((u32 *)(LQ_CGU_BASE_ADDR + 0x003C)) -+ -+static unsigned int lq_get_pll0_fdiv(void); -+ -+static inline unsigned int -+get_input_clock(int pll) -+{ -+ switch (pll) { -+ case 0: -+ if (lq_r32(LQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) -+ return BASIS_REQUENCY_USB; -+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) -+ return BASIC_FREQUENCY_1; -+ else -+ return BASIC_FREQUENCY_2; -+ case 1: -+ if (CGU_PLL1_SRC) -+ return BASIS_REQUENCY_USB; -+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) -+ return BASIC_FREQUENCY_1; -+ else -+ return BASIC_FREQUENCY_2; -+ case 2: -+ switch (CGU_PLL2_SRC) { -+ case 0: -+ return lq_get_pll0_fdiv(); -+ case 1: -+ return CGU_PLL2_PHASE_DIVIDER_ENABLE ? -+ BASIC_FREQUENCY_1 : -+ BASIC_FREQUENCY_2; -+ case 2: -+ return BASIS_REQUENCY_USB; -+ } -+ default: -+ return 0; -+ } -+} -+ -+static inline unsigned int -+cal_dsm(int pll, unsigned int num, unsigned int den) -+{ -+ u64 res, clock = get_input_clock(pll); -+ res = num * clock; -+ do_div(res, den); -+ return res; -+} -+ -+static inline unsigned int -+mash_dsm(int pll, unsigned int M, unsigned int N, unsigned int K) -+{ -+ unsigned int num = ((N + 1) << 10) + K; -+ unsigned int den = (M + 1) << 10; -+ return cal_dsm(pll, num, den); -+} -+ -+static inline unsigned int -+ssff_dsm_1(int pll, unsigned int M, unsigned int N, unsigned int K) -+{ -+ unsigned int num = ((N + 1) << 11) + K + 512; -+ unsigned int den = (M + 1) << 11; -+ return cal_dsm(pll, num, den); -+} -+ -+static inline unsigned int -+ssff_dsm_2(int pll, unsigned int M, unsigned int N, unsigned int K) -+{ -+ unsigned int num = K >= 512 ? -+ ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; -+ unsigned int den = (M + 1) << 12; -+ return cal_dsm(pll, num, den); -+} -+ -+static inline unsigned int -+dsm(int pll, unsigned int M, unsigned int N, unsigned int K, -+ unsigned int dsmsel, unsigned int phase_div_en) -+{ -+ if (!dsmsel) -+ return mash_dsm(pll, M, N, K); -+ else if (!phase_div_en) -+ return mash_dsm(pll, M, N, K); -+ else -+ return ssff_dsm_2(pll, M, N, K); -+} -+ -+static inline unsigned int -+lq_get_pll0_fosc(void) -+{ -+ if (CGU_PLL0_BYPASS) -+ return get_input_clock(0); -+ else -+ return !CGU_PLL0_CFG_FRAC_EN -+ ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, CGU_PLL0_CFG_DSMSEL, -+ CGU_PLL0_PHASE_DIVIDER_ENABLE) -+ : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, CGU_PLL0_CFG_PLLK, -+ CGU_PLL0_CFG_DSMSEL, CGU_PLL0_PHASE_DIVIDER_ENABLE); -+} -+ -+static unsigned int -+lq_get_pll0_fdiv(void) -+{ -+ unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; -+ return (lq_get_pll0_fosc() + (div >> 1)) / div; -+} -+ -+unsigned int -+lq_get_io_region_clock(void) -+{ -+ unsigned int ret = lq_get_pll0_fosc(); -+ switch (lq_r32(LQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) { -+ default: -+ case 0: -+ return (ret + 1) / 2; -+ case 1: -+ return (ret * 2 + 2) / 5; -+ case 2: -+ return (ret + 1) / 3; -+ case 3: -+ return (ret + 2) / 4; -+ } -+} -+EXPORT_SYMBOL(lq_get_io_region_clock); -+ -+unsigned int -+lq_get_fpi_bus_clock(int fpi) -+{ -+ unsigned int ret = lq_get_io_region_clock(); -+ if ((fpi == 2) && (lq_r32(LQ_CGU_SYS) & CGU_SYS_FPI_SEL)) -+ ret >>= 1; -+ return ret; -+} -+EXPORT_SYMBOL(lq_get_fpi_bus_clock); -+ -+unsigned int -+lq_get_cpu_hz(void) -+{ -+ switch (lq_r32(LQ_CGU_SYS) & 0xc) -+ { -+ case 0: -+ return CLOCK_333M; -+ case 4: -+ return DDR_HZ; -+ case 8: -+ return DDR_HZ << 1; -+ default: -+ return DDR_HZ >> 1; -+ } -+} -+EXPORT_SYMBOL(lq_get_cpu_hz); -+ -+unsigned int -+lq_get_fpi_hz(void) -+{ -+ unsigned int ddr_clock = DDR_HZ; -+ if (lq_r32(LQ_CGU_SYS) & 0x40) -+ return ddr_clock >> 1; -+ return ddr_clock; -+} -+EXPORT_SYMBOL(lq_get_fpi_hz); -+ -+ ---- /dev/null -+++ b/arch/mips/lantiq/xway/gpio.c -@@ -0,0 +1,206 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/slab.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/gpio.h> -+ -+#include <lantiq.h> -+ -+#define LQ_GPIO0_BASE_ADDR 0x1E100B10 -+#define LQ_GPIO1_BASE_ADDR 0x1E100B40 -+#define LQ_GPIO_SIZE 0x30 -+ -+#define LQ_GPIO_OUT 0x00 -+#define LQ_GPIO_IN 0x04 -+#define LQ_GPIO_DIR 0x08 -+#define LQ_GPIO_ALTSEL0 0x0C -+#define LQ_GPIO_ALTSEL1 0x10 -+#define LQ_GPIO_OD 0x14 -+ -+#define PINS_PER_PORT 16 -+ -+#define lq_gpio_getbit(m, r, p) !!(lq_r32(m + r) & (1 << p)) -+#define lq_gpio_setbit(m, r, p) lq_w32_mask(0, (1 << p), m + r) -+#define lq_gpio_clearbit(m, r, p) lq_w32_mask((1 << p), 0, m + r) -+ -+struct lq_gpio -+{ -+ void __iomem *membase; -+ struct gpio_chip chip; -+}; -+ -+int -+gpio_to_irq(unsigned int gpio) -+{ -+ return -EINVAL; -+} -+EXPORT_SYMBOL(gpio_to_irq); -+ -+int -+lq_gpio_setconfig(unsigned int pin, unsigned int reg, unsigned int val) -+{ -+ void __iomem *membase = (void*)KSEG1ADDR(LQ_GPIO0_BASE_ADDR); -+ if(pin >= (2 * PINS_PER_PORT)) -+ return -EINVAL; -+ if(pin >= PINS_PER_PORT) -+ { -+ pin -= PINS_PER_PORT; -+ membase += LQ_GPIO_SIZE; -+ } -+ if(val) -+ lq_w32_mask(0, (1 << pin), membase + reg); -+ else -+ lq_w32_mask((1 << pin), 0, membase + reg); -+ return 0; -+} -+EXPORT_SYMBOL(lq_gpio_setconfig); -+ -+int -+lq_gpio_request(unsigned int pin, unsigned int alt0, -+ unsigned int alt1, unsigned int dir, const char *name) -+{ -+ void __iomem *membase = (void*)KSEG1ADDR(LQ_GPIO0_BASE_ADDR); -+ if(pin >= (2 * PINS_PER_PORT)) -+ return -EINVAL; -+ if(gpio_request(pin, name)) -+ { -+ printk("failed to register %s gpio\n", name); -+ return -EBUSY; -+ } -+ if(dir) -+ gpio_direction_output(pin, 1); -+ else -+ gpio_direction_input(pin); -+ if(pin >= PINS_PER_PORT) -+ { -+ pin -= PINS_PER_PORT; -+ membase += LQ_GPIO_SIZE; -+ } -+ if(alt0) -+ lq_gpio_setbit(membase, LQ_GPIO_ALTSEL0, pin); -+ else -+ lq_gpio_clearbit(membase, LQ_GPIO_ALTSEL0, pin); -+ if(alt1) -+ lq_gpio_setbit(membase, LQ_GPIO_ALTSEL1, pin); -+ else -+ lq_gpio_clearbit(membase, LQ_GPIO_ALTSEL1, pin); -+ return 0; -+} -+EXPORT_SYMBOL(lq_gpio_request); -+ -+static void -+lq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) -+{ -+ struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip); -+ if(value) -+ lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_OUT, offset); -+ else -+ lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_OUT, offset); -+} -+ -+static int -+lq_gpio_get(struct gpio_chip *chip, unsigned int offset) -+{ -+ struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip); -+ return lq_gpio_getbit(lq_gpio->membase, LQ_GPIO_IN, offset); -+} -+ -+static int -+lq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) -+{ -+ struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip); -+ lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_OD, offset); -+ lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_DIR, offset); -+ return 0; -+} -+ -+static int -+lq_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) -+{ -+ struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip); -+ lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_OD, offset); -+ lq_gpio_setbit(lq_gpio->membase, LQ_GPIO_DIR, offset); -+ lq_gpio_set(chip, offset, value); -+ return 0; -+} -+ -+static int -+lq_gpio_req(struct gpio_chip *chip, unsigned offset) -+{ -+ struct lq_gpio *lq_gpio = container_of(chip, struct lq_gpio, chip); -+ lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_ALTSEL0, offset); -+ lq_gpio_clearbit(lq_gpio->membase, LQ_GPIO_ALTSEL1, offset); -+ return 0; -+} -+ -+static int -+lq_gpio_probe(struct platform_device *pdev) -+{ -+ struct lq_gpio *lq_gpio = kzalloc(sizeof(struct lq_gpio), GFP_KERNEL); -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ int ret = 0; -+ if(!res) -+ { -+ ret = -ENOENT; -+ goto err_free; -+ } -+ res = request_mem_region(res->start, resource_size(res), -+ dev_name(&pdev->dev)); -+ if(!res) -+ { -+ ret = -EBUSY; -+ goto err_free; -+ } -+ lq_gpio->membase = ioremap_nocache(res->start, resource_size(res)); -+ if(!lq_gpio->membase) -+ { -+ ret = -ENOMEM; -+ goto err_release_mem_region; -+ } -+ lq_gpio->chip.label = "lq_gpio"; -+ lq_gpio->chip.direction_input = lq_gpio_direction_input; -+ lq_gpio->chip.direction_output = lq_gpio_direction_output; -+ lq_gpio->chip.get = lq_gpio_get; -+ lq_gpio->chip.set = lq_gpio_set; -+ lq_gpio->chip.request = lq_gpio_req; -+ lq_gpio->chip.base = PINS_PER_PORT * pdev->id; -+ lq_gpio->chip.ngpio = PINS_PER_PORT; -+ platform_set_drvdata(pdev, lq_gpio); -+ ret = gpiochip_add(&lq_gpio->chip); -+ if(!ret) -+ return 0; -+ -+ iounmap(lq_gpio->membase); -+err_release_mem_region: -+ release_mem_region(res->start, resource_size(res)); -+err_free: -+ kfree(lq_gpio); -+ return ret; -+} -+ -+static struct platform_driver -+lq_gpio_driver = { -+ .probe = lq_gpio_probe, -+ .driver = { -+ .name = "lq_gpio", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+int __init -+lq_gpio_init(void) -+{ -+ int ret = platform_driver_register(&lq_gpio_driver); -+ if(ret) -+ printk(KERN_INFO "lq_gpio : Error registering platfom driver!"); -+ return ret; -+} -+ -+postcore_initcall(lq_gpio_init); ---- /dev/null -+++ b/arch/mips/lantiq/xway/reset.c -@@ -0,0 +1,53 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/init.h> -+#include <linux/io.h> -+#include <linux/pm.h> -+#include <asm/reboot.h> -+ -+#include <xway.h> -+ -+#define LQ_RCU_RST ((u32 *)(LQ_RCU_BASE_ADDR + 0x0010)) -+#define LQ_RCU_RST_ALL 0x40000000 -+ -+static void -+lq_machine_restart(char *command) -+{ -+ printk(KERN_NOTICE "System restart\n"); -+ local_irq_disable(); -+ lq_w32(lq_r32(LQ_RCU_RST) | LQ_RCU_RST_ALL, LQ_RCU_RST); -+ for(;;); -+} -+ -+static void -+lq_machine_halt(void) -+{ -+ printk(KERN_NOTICE "System halted.\n"); -+ local_irq_disable(); -+ for(;;); -+} -+ -+static void -+lq_machine_power_off(void) -+{ -+ printk(KERN_NOTICE "Please turn off the power now.\n"); -+ local_irq_disable(); -+ for(;;); -+} -+ -+static int __init -+mips_reboot_setup(void) -+{ -+ _machine_restart = lq_machine_restart; -+ _machine_halt = lq_machine_halt; -+ pm_power_off = lq_machine_power_off; -+ return 0; -+} -+ -+arch_initcall(mips_reboot_setup); |