summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/patches/230-xway_etop.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/patches/230-xway_etop.patch')
-rw-r--r--target/linux/lantiq/patches/230-xway_etop.patch585
1 files changed, 0 insertions, 585 deletions
diff --git a/target/linux/lantiq/patches/230-xway_etop.patch b/target/linux/lantiq/patches/230-xway_etop.patch
deleted file mode 100644
index 2ba8427..0000000
--- a/target/linux/lantiq/patches/230-xway_etop.patch
+++ /dev/null
@@ -1,585 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -235,6 +235,12 @@
-
- source "drivers/net/arm/Kconfig"
-
-+config LANTIQ_ETOP
-+ tristate "Lantiq SoC ETOP driver"
-+ depends on SOC_LANTIQ_XWAY
-+ help
-+ Support for the MII0 inside the Lantiq SoC
-+
- config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -212,6 +212,7 @@
- obj-$(CONFIG_MVME16x_NET) += 82596.o
- obj-$(CONFIG_BVME6000_NET) += 82596.o
- obj-$(CONFIG_SC92031) += sc92031.o
-+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
---- /dev/null
-+++ b/drivers/net/lantiq_etop.c
-@@ -0,0 +1,557 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com>
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/uaccess.h>
-+#include <linux/in.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/phy.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/skbuff.h>
-+#include <linux/mm.h>
-+#include <linux/platform_device.h>
-+#include <linux/ethtool.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/checksum.h>
-+
-+#include <xway.h>
-+#include <xway_dma.h>
-+#include <lantiq_platform.h>
-+
-+#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
-+#define LQ_PPE32_MEM_MAP ((u32 *)(LQ_PPE32_BASE_ADDR + 0x10000))
-+#define LQ_PPE32_SRST ((u32 *)(LQ_PPE32_BASE_ADDR + 0x10080))
-+
-+/* mdio access */
-+#define LQ_PPE32_MDIO_CFG ((u32 *)(LQ_PPE32_BASE_ADDR + 0x11800))
-+#define LQ_PPE32_MDIO_ACC ((u32 *)(LQ_PPE32_BASE_ADDR + 0x11804))
-+
-+#define MDIO_ACC_REQUEST 0x80000000
-+#define MDIO_ACC_READ 0x40000000
-+#define MDIO_ACC_ADDR_MASK 0x1f
-+#define MDIO_ACC_ADDR_OFFSET 0x15
-+#define MDIO_ACC_REG_MASK 0x1f
-+#define MDIO_ACC_REG_OFFSET 0x10
-+#define MDIO_ACC_VAL_MASK 0xffff
-+
-+/* configuration */
-+#define LQ_PPE32_CFG ((u32 *)(LQ_PPE32_MEM_MAP + 0x1808))
-+
-+#define PPE32_MII_MASK 0xfffffffc
-+#define PPE32_MII_NORMAL 0x8
-+#define PPE32_MII_REVERSE 0xe
-+
-+/* packet length */
-+#define LQ_PPE32_IG_PLEN_CTRL ((u32 *)(LQ_PPE32_MEM_MAP + 0x1820))
-+
-+#define PPE32_PLEN_OVER 0x5ee
-+#define PPE32_PLEN_UNDER 0x400000
-+
-+/* enet */
-+#define LQ_PPE32_ENET_MAC_CFG ((u32 *)(LQ_PPE32_MEM_MAP + 0x1840))
-+
-+#define PPE32_CGEN 0x800
-+
-+struct lq_mii_priv {
-+ struct net_device_stats stats;
-+ struct dma_device_info *dma_device;
-+ struct sk_buff *skb;
-+
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phydev;
-+ int oldlink, oldspeed, oldduplex;
-+};
-+
-+static struct net_device *lq_etop_dev;
-+static unsigned char mac_addr[MAX_ADDR_LEN];
-+
-+static int lq_mdiobus_write(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data)
-+{
-+ u32 val = MDIO_ACC_REQUEST |
-+ ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) |
-+ phy_data;
-+
-+ while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
-+ ;
-+ lq_w32(val, LQ_PPE32_MDIO_ACC);
-+
-+ return 0;
-+}
-+
-+static int lq_mdiobus_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ |
-+ ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET);
-+
-+ while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
-+ ;
-+ lq_w32(val, LQ_PPE32_MDIO_ACC);
-+ while (lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST)
-+ ;
-+ val = lq_r32(LQ_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK;
-+ return val;
-+}
-+
-+int lq_mii_open(struct net_device *dev)
-+{
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
-+ struct dma_device_info *dma_dev = priv->dma_device;
-+ int i;
-+
-+ for (i = 0; i < dma_dev->max_rx_chan_num; i++) {
-+ if ((dma_dev->rx_chan[i])->control == LQ_DMA_CH_ON)
-+ (dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]);
-+ }
-+ netif_start_queue(dev);
-+ return 0;
-+}
-+
-+int lq_mii_release(struct net_device *dev)
-+{
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
-+ struct dma_device_info *dma_dev = priv->dma_device;
-+ int i;
-+
-+ for (i = 0; i < dma_dev->max_rx_chan_num; i++)
-+ dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
-+ netif_stop_queue(dev);
-+ return 0;
-+}
-+
-+int lq_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
-+{
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
-+ unsigned char *buf = NULL;
-+ struct sk_buff *skb = NULL;
-+ int len = 0;
-+
-+ len = dma_device_read(dma_dev, &buf, (void **)&skb);
-+
-+ if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE) {
-+ printk(KERN_INFO "lq_etop: packet too large %d\n", len);
-+ goto lq_mii_hw_receive_err_exit;
-+ }
-+
-+ /* remove CRC */
-+ len -= 4;
-+ if (skb == NULL) {
-+ printk(KERN_INFO "lq_etop: cannot restore pointer\n");
-+ goto lq_mii_hw_receive_err_exit;
-+ }
-+
-+ if (len > (skb->end - skb->tail)) {
-+ printk(KERN_INFO "lq_etop: BUG, len:%d end:%p tail:%p\n",
-+ (len+4), skb->end, skb->tail);
-+ goto lq_mii_hw_receive_err_exit;
-+ }
-+
-+ skb_put(skb, len);
-+ skb->dev = dev;
-+
-+ if (priv->phydev && priv->phydev->netif_rx) {
-+ priv->phydev->netif_rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, dev);
-+ netif_rx(skb);
-+ }
-+
-+ priv->stats.rx_packets++;
-+ priv->stats.rx_bytes += len;
-+ return 0;
-+
-+lq_mii_hw_receive_err_exit:
-+ if (len == 0) {
-+ if (skb)
-+ dev_kfree_skb_any(skb);
-+ priv->stats.rx_errors++;
-+ priv->stats.rx_dropped++;
-+ return -EIO;
-+ } else {
-+ return len;
-+ }
-+}
-+
-+int lq_mii_hw_tx(char *buf, int len, struct net_device *dev)
-+{
-+ int ret = 0;
-+ struct lq_mii_priv *priv = netdev_priv(dev);
-+ struct dma_device_info *dma_dev = priv->dma_device;
-+ ret = dma_device_write(dma_dev, buf, len, priv->skb);
-+ return ret;
-+}
-+
-+int lq_mii_tx(struct sk_buff *skb, struct net_device *dev)
-+{
-+ int len;
-+ char *data;
-+ struct lq_mii_priv *priv = netdev_priv(dev);
-+ struct dma_device_info *dma_dev = priv->dma_device;
-+
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+ data = skb->data;
-+ priv->skb = skb;
-+ dev->trans_start = jiffies;
-+ /* TODO: we got more than 1 dma channel,
-+ so we should do something intelligent here to select one */
-+ dma_dev->current_tx_chan = 0;
-+
-+ wmb();
-+
-+ if (lq_mii_hw_tx(data, len, dev) != len) {
-+ dev_kfree_skb_any(skb);
-+ priv->stats.tx_errors++;
-+ priv->stats.tx_dropped++;
-+ } else {
-+ priv->stats.tx_packets++;
-+ priv->stats.tx_bytes += len;
-+ }
-+
-+ return 0;
-+}
-+
-+void lq_mii_tx_timeout(struct net_device *dev)
-+{
-+ int i;
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
-+
-+ priv->stats.tx_errors++;
-+ for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
-+ priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
-+ netif_wake_queue(dev);
-+ return;
-+}
-+
-+int dma_intr_handler(struct dma_device_info *dma_dev, int status)
-+{
-+ int i;
-+
-+ switch (status) {
-+ case RCV_INT:
-+ lq_mii_hw_receive(lq_etop_dev, dma_dev);
-+ break;
-+
-+ case TX_BUF_FULL_INT:
-+ printk(KERN_INFO "lq_etop: tx buffer full\n");
-+ netif_stop_queue(lq_etop_dev);
-+ for (i = 0; i < dma_dev->max_tx_chan_num; i++) {
-+ if ((dma_dev->tx_chan[i])->control == LQ_DMA_CH_ON)
-+ dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
-+ }
-+ break;
-+
-+ case TRANSMIT_CPT_INT:
-+ for (i = 0; i < dma_dev->max_tx_chan_num; i++)
-+ dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
-+
-+ netif_wake_queue(lq_etop_dev);
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+unsigned char *lq_etop_dma_buffer_alloc(int len, int *byte_offset, void **opt)
-+{
-+ unsigned char *buffer = NULL;
-+ struct sk_buff *skb = NULL;
-+
-+ skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
-+ if (skb == NULL)
-+ return NULL;
-+
-+ buffer = (unsigned char *)(skb->data);
-+ skb_reserve(skb, 2);
-+ *(int *)opt = (int)skb;
-+ *byte_offset = 2;
-+
-+ return buffer;
-+}
-+
-+void lq_etop_dma_buffer_free(unsigned char *dataptr, void *opt)
-+{
-+ struct sk_buff *skb = NULL;
-+
-+ if (opt == NULL) {
-+ kfree(dataptr);
-+ } else {
-+ skb = (struct sk_buff *)opt;
-+ dev_kfree_skb_any(skb);
-+ }
-+}
-+
-+static void
-+lq_adjust_link(struct net_device *dev)
-+{
-+ struct lq_mii_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = priv->phydev;
-+ int new_state = 0;
-+
-+ /* Did anything change? */
-+ if (priv->oldlink != phydev->link ||
-+ priv->oldduplex != phydev->duplex ||
-+ priv->oldspeed != phydev->speed) {
-+ /* Yes, so update status and mark as changed */
-+ new_state = 1;
-+ priv->oldduplex = phydev->duplex;
-+ priv->oldspeed = phydev->speed;
-+ priv->oldlink = phydev->link;
-+ }
-+
-+ /* If link status changed, show new status */
-+ if (new_state)
-+ phy_print_status(phydev);
-+}
-+
-+static int mii_probe(struct net_device *dev)
-+{
-+ struct lq_mii_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ priv->oldlink = 0;
-+ priv->oldspeed = 0;
-+ priv->oldduplex = -1;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-+ if (priv->mii_bus->phy_map[phy_addr]) {
-+ phydev = priv->mii_bus->phy_map[phy_addr];
-+ break; /* break out with first one found */
-+ }
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "%s: no PHY found\n", dev->name);
-+ return -ENODEV;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &lq_adjust_link,
-+ 0, PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ priv->phydev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
-+
-+ return 0;
-+}
-+
-+
-+static int lq_mii_dev_init(struct net_device *dev)
-+{
-+ int i;
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(dev);
-+ ether_setup(dev);
-+ dev->watchdog_timeo = 10 * HZ;
-+ dev->mtu = 1500;
-+ memset(priv, 0, sizeof(struct lq_mii_priv));
-+ priv->dma_device = dma_device_reserve("PPE");
-+ if (!priv->dma_device) {
-+ BUG();
-+ return -ENODEV;
-+ }
-+ priv->dma_device->buffer_alloc = &lq_etop_dma_buffer_alloc;
-+ priv->dma_device->buffer_free = &lq_etop_dma_buffer_free;
-+ priv->dma_device->intr_handler = &dma_intr_handler;
-+ priv->dma_device->max_rx_chan_num = 4;
-+
-+ for (i = 0; i < priv->dma_device->max_rx_chan_num; i++) {
-+ priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
-+ priv->dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
-+ }
-+
-+ for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
-+ if (i == 0)
-+ priv->dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
-+ else
-+ priv->dma_device->tx_chan[i]->control = LQ_DMA_CH_OFF;
-+
-+ dma_device_register(priv->dma_device);
-+
-+ printk(KERN_INFO "%s: using mac=", dev->name);
-+ for (i = 0; i < 6; i++) {
-+ dev->dev_addr[i] = mac_addr[i];
-+ printk("%02X%c", dev->dev_addr[i], (i == 5) ? ('\n') : (':'));
-+ }
-+
-+ priv->mii_bus = mdiobus_alloc();
-+ if (priv->mii_bus == NULL)
-+ return -ENOMEM;
-+
-+ priv->mii_bus->priv = dev;
-+ priv->mii_bus->read = lq_mdiobus_read;
-+ priv->mii_bus->write = lq_mdiobus_write;
-+ priv->mii_bus->name = "lq_mii";
-+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+ priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-+ for(i = 0; i < PHY_MAX_ADDR; ++i)
-+ priv->mii_bus->irq[i] = PHY_POLL;
-+
-+ mdiobus_register(priv->mii_bus);
-+
-+ return mii_probe(dev);
-+}
-+
-+static void lq_mii_chip_init(int mode)
-+{
-+ lq_pmu_enable(PMU_DMA);
-+ lq_pmu_enable(PMU_PPE);
-+
-+ if (mode == REV_MII_MODE)
-+ lq_w32_mask(PPE32_MII_MASK, PPE32_MII_REVERSE, LQ_PPE32_CFG);
-+ else if (mode == MII_MODE)
-+ lq_w32_mask(PPE32_MII_MASK, PPE32_MII_NORMAL, LQ_PPE32_CFG);
-+ lq_w32(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, LQ_PPE32_IG_PLEN_CTRL);
-+ lq_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
-+ wmb();
-+}
-+
-+static int lq_mii_eth_mac_addr(struct net_device *dev, void *p)
-+{
-+ int retcode;
-+
-+ retcode = eth_mac_addr(dev, p);
-+
-+ if (retcode)
-+ return retcode;
-+
-+ // set rx_addr for unicast filter
-+ lq_w32(((dev->dev_addr[0]<<24)|(dev->dev_addr[1]<<16)|(dev->dev_addr[2]<< 8)|dev->dev_addr[3]), (u32*)(LQ_PPE32_BASE_ADDR|(0x461b<<2)));
-+ lq_w32(((dev->dev_addr[4]<<24)|(dev->dev_addr[5]<<16)), (u32*)(LQ_PPE32_BASE_ADDR|(0x461c<<2)));
-+
-+ return 0;
-+}
-+
-+static void lq_mii_set_rx_mode (struct net_device *dev)
-+{
-+ // rx_mode promisc: unset unicast filter
-+ if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
-+ lq_w32(lq_r32((u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2))) & ~(1<<28), (u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2)));
-+ // enable unicast filter
-+ else
-+ lq_w32(lq_r32((u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2))) | (1<<28), (u32*)(LQ_PPE32_BASE_ADDR|(0x4614<<2)));
-+}
-+
-+static const struct net_device_ops lq_eth_netdev_ops = {
-+ .ndo_init = lq_mii_dev_init,
-+ .ndo_open = lq_mii_open,
-+ .ndo_stop = lq_mii_release,
-+ .ndo_start_xmit = lq_mii_tx,
-+ .ndo_tx_timeout = lq_mii_tx_timeout,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_set_mac_address = lq_mii_eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_multicast_list = lq_mii_set_rx_mode,
-+};
-+
-+static int
-+lq_mii_probe(struct platform_device *dev)
-+{
-+ int result = 0;
-+ struct lq_eth_data *eth = (struct lq_eth_data*)dev->dev.platform_data;
-+ lq_etop_dev = alloc_etherdev(sizeof(struct lq_mii_priv));
-+ lq_etop_dev->netdev_ops = &lq_eth_netdev_ops;
-+ memcpy(mac_addr, eth->mac, 6);
-+ strcpy(lq_etop_dev->name, "eth%d");
-+ lq_mii_chip_init(eth->mii_mode);
-+ result = register_netdev(lq_etop_dev);
-+ if (result) {
-+ printk(KERN_INFO "lq_etop: error %i registering device \"%s\"\n", result, lq_etop_dev->name);
-+ goto out;
-+ }
-+
-+ printk(KERN_INFO "lq_etop: driver loaded!\n");
-+
-+out:
-+ return result;
-+}
-+
-+static int lq_mii_remove(struct platform_device *dev)
-+{
-+ struct lq_mii_priv *priv = (struct lq_mii_priv *)netdev_priv(lq_etop_dev);
-+
-+ printk(KERN_INFO "lq_etop: lq_etop cleanup\n");
-+
-+ dma_device_unregister(priv->dma_device);
-+ dma_device_release(priv->dma_device);
-+ kfree(priv->dma_device);
-+ unregister_netdev(lq_etop_dev);
-+ return 0;
-+}
-+
-+static struct platform_driver lq_mii_driver = {
-+ .probe = lq_mii_probe,
-+ .remove = lq_mii_remove,
-+ .driver = {
-+ .name = "lq_etop",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+int __init lq_mii_init(void)
-+{
-+ int ret = platform_driver_register(&lq_mii_driver);
-+ if (ret)
-+ printk(KERN_INFO "lq_etop: Error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit lq_mii_cleanup(void)
-+{
-+ platform_driver_unregister(&lq_mii_driver);
-+}
-+
-+module_init(lq_mii_init);
-+module_exit(lq_mii_cleanup);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("ethernet driver for IFXMIPS boards");