diff options
Diffstat (limited to 'target/linux/lantiq/patches/941-spi2.patch')
-rw-r--r-- | target/linux/lantiq/patches/941-spi2.patch | 1103 |
1 files changed, 0 insertions, 1103 deletions
diff --git a/target/linux/lantiq/patches/941-spi2.patch b/target/linux/lantiq/patches/941-spi2.patch deleted file mode 100644 index 9cc23a1..0000000 --- a/target/linux/lantiq/patches/941-spi2.patch +++ /dev/null @@ -1,1103 +0,0 @@ -From: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> -Date: Thu, 3 Mar 2011 17:15:30 +0000 (+0100) -Subject: SPI: lantiq: Add driver for Lantiq SoC SPI controller -X-Git-Url: http://nbd.name/gitweb.cgi?p=lantiq.git;a=commitdiff_plain;h=653c95b8b9066c9c6ac08bd64d0ceee439e9fd90;hp=3d21b04682ae8eb1c1965aba39d1796e8c5ad84b - -SPI: lantiq: Add driver for Lantiq SoC SPI controller - -Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> ---- - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -176,6 +176,14 @@ - This enables using the Freescale i.MX SPI controllers in master - mode. - -+config SPI_LANTIQ -+ tristate "Lantiq SoC SPI controller" -+ depends on SOC_LANTIQ_XWAY -+ select SPI_BITBANG -+ help -+ This driver supports the Lantiq SoC SPI controller in master -+ mode. -+ - config SPI_LM70_LLP - tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" - depends on PARPORT && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -24,6 +24,7 @@ - obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o -+obj-$(CONFIG_SPI_LANTIQ) += spi_lantiq.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o - obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o - obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o ---- /dev/null -+++ b/drivers/spi/spi_lantiq.c -@@ -0,0 +1,1063 @@ -+/* -+ * Lantiq SoC SPI controller -+ * -+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/workqueue.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+#include <linux/sched.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/completion.h> -+#include <linux/spinlock.h> -+#include <linux/err.h> -+#include <linux/clk.h> -+#include <linux/gpio.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/spi_bitbang.h> -+ -+#include <xway.h> -+#include <xway_irq.h> -+#include <lantiq_platform.h> -+ -+#define LQ_SPI_CLC 0x00 /* Clock control */ -+#define LQ_SPI_PISEL 0x04 /* Port input select */ -+#define LQ_SPI_ID 0x08 /* Identification */ -+#define LQ_SPI_CON 0x10 /* Control */ -+#define LQ_SPI_STAT 0x14 /* Status */ -+#define LQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ -+#define LQ_SPI_TB 0x20 /* Transmit buffer */ -+#define LQ_SPI_RB 0x24 /* Receive buffer */ -+#define LQ_SPI_RXFCON 0x30 /* Receive FIFO control */ -+#define LQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ -+#define LQ_SPI_FSTAT 0x38 /* FIFO status */ -+#define LQ_SPI_BRT 0x40 /* Baudrate timer */ -+#define LQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ -+#define LQ_SPI_SFCON 0x60 /* Serial frame control */ -+#define LQ_SPI_SFSTAT 0x64 /* Serial frame status */ -+#define LQ_SPI_GPOCON 0x70 /* General purpose output control */ -+#define LQ_SPI_GPOSTAT 0x74 /* General purpose output status */ -+#define LQ_SPI_FGPO 0x78 /* Forced general purpose output */ -+#define LQ_SPI_RXREQ 0x80 /* Receive request */ -+#define LQ_SPI_RXCNT 0x84 /* Receive count */ -+#define LQ_SPI_DMACON 0xEC /* DMA control */ -+#define LQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ -+#define LQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ -+#define LQ_SPI_IRNCR 0xFC /* Interrupt node control */ -+ -+#define LQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ -+#define LQ_SPI_CLC_SMC_MASK 0xFF -+#define LQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ -+#define LQ_SPI_CLC_RMC_MASK 0xFF -+#define LQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define LQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define LQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ -+#define LQ_SPI_ID_TXFS_MASK 0x3F -+#define LQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ -+#define LQ_SPI_ID_RXFS_MASK 0x3F -+#define LQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ -+#define LQ_SPI_ID_CFG BIT(5) /* DMA interface support */ -+ -+#define LQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ -+#define LQ_SPI_CON_BM_MASK 0x1F -+#define LQ_SPI_CON_EM BIT(24) /* Echo mode */ -+#define LQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define LQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define LQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define LQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define LQ_SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define LQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define LQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define LQ_SPI_CON_LB BIT(7) /* Loopback control */ -+#define LQ_SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define LQ_SPI_CON_PH BIT(5) /* Clock phase control */ -+#define LQ_SPI_CON_HB BIT(4) /* Heading control */ -+#define LQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define LQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define LQ_SPI_STAT_RXBV_MASK 0x7 -+#define LQ_SPI_STAT_RXBV_SHIFT 28 -+#define LQ_SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define LQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define LQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define LQ_SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define LQ_SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define LQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define LQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define LQ_SPI_STAT_EN BIT(0) /* Enable bit */ -+ -+#define LQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define LQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define LQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define LQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define LQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ -+#define LQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define LQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define LQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define LQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define LQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define LQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define LQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define LQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define LQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define LQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define LQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define LQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 -+ -+#define LQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ -+#define LQ_SPI_RXFCON_RXFITL_MASK 0x3F -+#define LQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define LQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define LQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ -+#define LQ_SPI_TXFCON_TXFITL_MASK 0x3F -+#define LQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define LQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define LQ_SPI_FSTAT_RXFFL_MASK 0x3f -+#define LQ_SPI_FSTAT_RXFFL_SHIFT 0 -+#define LQ_SPI_FSTAT_TXFFL_MASK 0x3f -+#define LQ_SPI_FSTAT_TXFFL_SHIFT 8 -+ -+#define LQ_SPI_GPOCON_ISCSBN_SHIFT 8 -+#define LQ_SPI_GPOCON_INVOUTN_SHIFT 0 -+ -+#define LQ_SPI_FGPO_SETOUTN_SHIFT 8 -+#define LQ_SPI_FGPO_CLROUTN_SHIFT 0 -+ -+#define LQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ -+#define LQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ -+ -+#define LQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define LQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define LQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ -+#define LQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ -+#define LQ_SPI_IRNEN_ALL 0xF -+ -+/* Hard-wired GPIOs used by SPI controller */ -+#define LQ_SPI_GPIO_DI 16 -+#define LQ_SPI_GPIO_DO 17 -+#define LQ_SPI_GPIO_CLK 18 -+ -+struct lq_spi { -+ struct spi_bitbang bitbang; -+ struct completion done; -+ spinlock_t lock; -+ -+ struct device *dev; -+ void __iomem *base; -+ struct clk *clk; -+ -+ int status; -+ int irq[3]; -+ -+ const u8 *tx; -+ u8 *rx; -+ u32 tx_cnt; -+ u32 rx_cnt; -+ u32 len; -+ struct spi_transfer *curr_transfer; -+ -+ u32 (*get_tx) (struct lq_spi *); -+ -+ u16 txfs; -+ u16 rxfs; -+ unsigned dma_support:1; -+ unsigned cfg_mode:1; -+ -+}; -+ -+struct lq_spi_controller_state { -+ void (*cs_activate) (struct spi_device *); -+ void (*cs_deactivate) (struct spi_device *); -+}; -+ -+struct lq_spi_irq_map { -+ char *name; -+ irq_handler_t handler; -+}; -+ -+struct lq_spi_cs_gpio_map { -+ unsigned gpio; -+ unsigned altsel0; -+ unsigned altsel1; -+}; -+ -+static inline struct lq_spi *lq_spi_to_hw(struct spi_device *spi) -+{ -+ return spi_master_get_devdata(spi->master); -+} -+ -+static inline u32 lq_spi_reg_read(struct lq_spi *hw, u32 reg) -+{ -+ return ioread32be(hw->base + reg); -+} -+ -+static inline void lq_spi_reg_write(struct lq_spi *hw, u32 val, u32 reg) -+{ -+ iowrite32be(val, hw->base + reg); -+} -+ -+static inline void lq_spi_reg_setbit(struct lq_spi *hw, u32 bits, u32 reg) -+{ -+ u32 val; -+ -+ val = lq_spi_reg_read(hw, reg); -+ val |= bits; -+ lq_spi_reg_write(hw, val, reg); -+} -+ -+static inline void lq_spi_reg_clearbit(struct lq_spi *hw, u32 bits, u32 reg) -+{ -+ u32 val; -+ -+ val = lq_spi_reg_read(hw, reg); -+ val &= ~bits; -+ lq_spi_reg_write(hw, val, reg); -+} -+ -+static void lq_spi_hw_enable(struct lq_spi *hw) -+{ -+ u32 clc; -+ -+ /* Power-up mdule */ -+ lq_pmu_enable(PMU_SPI); -+ -+ /* -+ * Set clock divider for run mode to 1 to -+ * run at same frequency as FPI bus -+ */ -+ clc = (1 << LQ_SPI_CLC_RMC_SHIFT); -+ lq_spi_reg_write(hw, clc, LQ_SPI_CLC); -+} -+ -+static void lq_spi_hw_disable(struct lq_spi *hw) -+{ -+ /* Set clock divider to 0 and set module disable bit */ -+ lq_spi_reg_write(hw, LQ_SPI_CLC_DISS, LQ_SPI_CLC); -+ -+ /* Power-down mdule */ -+ lq_pmu_disable(PMU_SPI); -+} -+ -+static void lq_spi_reset_fifos(struct lq_spi *hw) -+{ -+ u32 val; -+ -+ /* -+ * Enable and flush FIFOs. Set interrupt trigger level to -+ * half of FIFO count implemented in hardware. -+ */ -+ if (hw->txfs > 1) { -+ val = hw->txfs << (LQ_SPI_TXFCON_TXFITL_SHIFT - 1); -+ val |= LQ_SPI_TXFCON_TXFEN | LQ_SPI_TXFCON_TXFLU; -+ lq_spi_reg_write(hw, val, LQ_SPI_TXFCON); -+ } -+ -+ if (hw->rxfs > 1) { -+ val = hw->rxfs << (LQ_SPI_RXFCON_RXFITL_SHIFT - 1); -+ val |= LQ_SPI_RXFCON_RXFEN | LQ_SPI_RXFCON_RXFLU; -+ lq_spi_reg_write(hw, val, LQ_SPI_RXFCON); -+ } -+} -+ -+static inline int lq_spi_wait_ready(struct lq_spi *hw) -+{ -+ u32 stat; -+ unsigned long timeout; -+ -+ timeout = jiffies + msecs_to_jiffies(200); -+ -+ do { -+ stat = lq_spi_reg_read(hw, LQ_SPI_STAT); -+ if (!(stat & LQ_SPI_STAT_BSY)) -+ return 0; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ -+ dev_err(hw->dev, "SPI wait ready timed out\n"); -+ -+ return -ETIMEDOUT; -+} -+ -+static void lq_spi_config_mode_set(struct lq_spi *hw) -+{ -+ if (hw->cfg_mode) -+ return; -+ -+ /* -+ * Putting the SPI module in config mode is only safe if no -+ * transfer is in progress as indicated by busy flag STATE.BSY. -+ */ -+ if (lq_spi_wait_ready(hw)) { -+ lq_spi_reset_fifos(hw); -+ hw->status = -ETIMEDOUT; -+ } -+ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_CLREN, LQ_SPI_WHBSTATE); -+ -+ hw->cfg_mode = 1; -+} -+ -+static void lq_spi_run_mode_set(struct lq_spi *hw) -+{ -+ if (!hw->cfg_mode) -+ return; -+ -+ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_SETEN, LQ_SPI_WHBSTATE); -+ -+ hw->cfg_mode = 0; -+} -+ -+static u32 lq_spi_tx_word_u8(struct lq_spi *hw) -+{ -+ const u8 *tx = hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt++; -+ hw->tx++; -+ -+ return data; -+} -+ -+static u32 lq_spi_tx_word_u16(struct lq_spi *hw) -+{ -+ const u16 *tx = (u16 *) hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt += 2; -+ hw->tx += 2; -+ -+ return data; -+} -+ -+static u32 lq_spi_tx_word_u32(struct lq_spi *hw) -+{ -+ const u32 *tx = (u32 *) hw->tx; -+ u32 data = *tx++; -+ -+ hw->tx_cnt += 4; -+ hw->tx += 4; -+ -+ return data; -+} -+ -+static void lq_spi_bits_per_word_set(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 bm; -+ u8 bits_per_word = spi->bits_per_word; -+ -+ /* -+ * Use either default value of SPI device or value -+ * from current transfer. -+ */ -+ if (hw->curr_transfer && hw->curr_transfer->bits_per_word) -+ bits_per_word = hw->curr_transfer->bits_per_word; -+ -+ if (bits_per_word <= 8) -+ hw->get_tx = lq_spi_tx_word_u8; -+ else if (bits_per_word <= 16) -+ hw->get_tx = lq_spi_tx_word_u16; -+ else if (bits_per_word <= 32) -+ hw->get_tx = lq_spi_tx_word_u32; -+ -+ /* CON.BM value = bits_per_word - 1 */ -+ bm = (bits_per_word - 1) << LQ_SPI_CON_BM_SHIFT; -+ -+ lq_spi_reg_clearbit(hw, LQ_SPI_CON_BM_MASK << -+ LQ_SPI_CON_BM_SHIFT, LQ_SPI_CON); -+ lq_spi_reg_setbit(hw, bm, LQ_SPI_CON); -+} -+ -+static void lq_spi_speed_set(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 br, max_speed_hz, spi_clk; -+ u32 speed_hz = spi->max_speed_hz; -+ -+ /* -+ * Use either default value of SPI device or value -+ * from current transfer. -+ */ -+ if (hw->curr_transfer && hw->curr_transfer->speed_hz) -+ speed_hz = hw->curr_transfer->speed_hz; -+ -+ /* -+ * SPI module clock is derived from FPI bus clock dependent on -+ * divider value in CLC.RMS which is always set to 1. -+ */ -+ spi_clk = clk_get_rate(hw->clk); -+ -+ /* -+ * Maximum SPI clock frequency in master mode is half of -+ * SPI module clock frequency. Maximum reload value of -+ * baudrate generator BR is 2^16. -+ */ -+ max_speed_hz = spi_clk / 2; -+ if (speed_hz >= max_speed_hz) -+ br = 0; -+ else -+ br = (max_speed_hz / speed_hz) - 1; -+ -+ if (br > 0xFFFF) -+ br = 0xFFFF; -+ -+ lq_spi_reg_write(hw, br, LQ_SPI_BRT); -+} -+ -+static void lq_spi_clockmode_set(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 con; -+ -+ con = lq_spi_reg_read(hw, LQ_SPI_CON); -+ -+ /* -+ * SPI mode mapping in CON register: -+ * Mode CPOL CPHA CON.PO CON.PH -+ * 0 0 0 0 1 -+ * 1 0 1 0 0 -+ * 2 1 0 1 1 -+ * 3 1 1 1 0 -+ */ -+ if (spi->mode & SPI_CPHA) -+ con &= ~LQ_SPI_CON_PH; -+ else -+ con |= LQ_SPI_CON_PH; -+ -+ if (spi->mode & SPI_CPOL) -+ con |= LQ_SPI_CON_PO; -+ else -+ con &= ~LQ_SPI_CON_PO; -+ -+ /* Set heading control */ -+ if (spi->mode & SPI_LSB_FIRST) -+ con &= ~LQ_SPI_CON_HB; -+ else -+ con |= LQ_SPI_CON_HB; -+ -+ lq_spi_reg_write(hw, con, LQ_SPI_CON); -+} -+ -+static void lq_spi_xmit_set(struct lq_spi *hw, struct spi_transfer *t) -+{ -+ u32 con; -+ -+ con = lq_spi_reg_read(hw, LQ_SPI_CON); -+ -+ if (t) { -+ if (t->tx_buf && t->rx_buf) { -+ con &= ~(LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF); -+ } else if (t->rx_buf) { -+ con &= ~LQ_SPI_CON_RXOFF; -+ con |= LQ_SPI_CON_TXOFF; -+ } else if (t->tx_buf) { -+ con &= ~LQ_SPI_CON_TXOFF; -+ con |= LQ_SPI_CON_RXOFF; -+ } -+ } else -+ con |= (LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF); -+ -+ lq_spi_reg_write(hw, con, LQ_SPI_CON); -+} -+ -+static void lq_spi_gpio_cs_activate(struct spi_device *spi) -+{ -+ struct lq_spi_controller_data *cdata = spi->controller_data; -+ int val = spi->mode & SPI_CS_HIGH ? 1 : 0; -+ -+ gpio_set_value(cdata->gpio, val); -+} -+ -+static void lq_spi_gpio_cs_deactivate(struct spi_device *spi) -+{ -+ struct lq_spi_controller_data *cdata = spi->controller_data; -+ int val = spi->mode & SPI_CS_HIGH ? 0 : 1; -+ -+ gpio_set_value(cdata->gpio, val); -+} -+ -+static void lq_spi_internal_cs_activate(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 fgpo; -+ -+ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_CLROUTN_SHIFT)); -+ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); -+} -+ -+static void lq_spi_internal_cs_deactivate(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 fgpo; -+ -+ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_SETOUTN_SHIFT)); -+ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); -+} -+ -+static void lq_spi_chipselect(struct spi_device *spi, int cs) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ struct lq_spi_controller_state *cstate = spi->controller_state; -+ -+ switch (cs) { -+ case BITBANG_CS_ACTIVE: -+ lq_spi_bits_per_word_set(spi); -+ lq_spi_speed_set(spi); -+ lq_spi_clockmode_set(spi); -+ lq_spi_run_mode_set(hw); -+ -+ cstate->cs_activate(spi); -+ break; -+ -+ case BITBANG_CS_INACTIVE: -+ cstate->cs_deactivate(spi); -+ -+ lq_spi_config_mode_set(hw); -+ -+ break; -+ } -+} -+ -+static int lq_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u8 bits_per_word = spi->bits_per_word; -+ -+ hw->curr_transfer = t; -+ -+ if (t && t->bits_per_word) -+ bits_per_word = t->bits_per_word; -+ -+ if (bits_per_word > 32) -+ return -EINVAL; -+ -+ lq_spi_config_mode_set(hw); -+ -+ return 0; -+} -+ -+static const struct lq_spi_cs_gpio_map lq_spi_cs[] = { -+ { 15, 1, 0 }, -+ { 22, 1, 0 }, -+ { 13, 0, 1 }, -+ { 10, 0, 1 }, -+ { 9, 0, 1 }, -+ { 11, 1, 1 }, -+}; -+ -+static int lq_spi_setup(struct spi_device *spi) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ struct lq_spi_controller_data *cdata = spi->controller_data; -+ struct lq_spi_controller_state *cstate; -+ u32 gpocon, fgpo; -+ int ret; -+ -+ /* Set default word length to 8 if not set */ -+ if (!spi->bits_per_word) -+ spi->bits_per_word = 8; -+ -+ if (spi->bits_per_word > 32) -+ return -EINVAL; -+ -+ if (!spi->controller_state) { -+ cstate = kzalloc(sizeof(struct lq_spi_controller_state), -+ GFP_KERNEL); -+ if (!cstate) -+ return -ENOMEM; -+ -+ spi->controller_state = cstate; -+ } else -+ return 0; -+ -+ /* -+ * Up to six GPIOs can be connected to the SPI module -+ * via GPIO alternate function to control the chip select lines. -+ * For more flexibility in board layout this driver can also control -+ * the CS lines via GPIO API. If GPIOs should be used, board setup code -+ * have to register the SPI device with struct lq_spi_controller_data -+ * attached. -+ */ -+ if (cdata && cdata->gpio) { -+ ret = gpio_request(cdata->gpio, "spi-cs"); -+ if (ret) -+ return -EBUSY; -+ -+ ret = spi->mode & SPI_CS_HIGH ? 0 : 1; -+ gpio_direction_output(cdata->gpio, ret); -+ -+ cstate->cs_activate = lq_spi_gpio_cs_activate; -+ cstate->cs_deactivate = lq_spi_gpio_cs_deactivate; -+ } else { -+ ret = lq_gpio_request(lq_spi_cs[spi->chip_select].gpio, -+ lq_spi_cs[spi->chip_select].altsel0, -+ lq_spi_cs[spi->chip_select].altsel1, -+ 1, "spi-cs"); -+ if (ret) -+ return -EBUSY; -+ -+ gpocon = (1 << (spi->chip_select + -+ LQ_SPI_GPOCON_ISCSBN_SHIFT)); -+ -+ if (spi->mode & SPI_CS_HIGH) -+ gpocon |= (1 << spi->chip_select); -+ -+ fgpo = (1 << (spi->chip_select + LQ_SPI_FGPO_SETOUTN_SHIFT)); -+ -+ lq_spi_reg_setbit(hw, gpocon, LQ_SPI_GPOCON); -+ lq_spi_reg_setbit(hw, fgpo, LQ_SPI_FGPO); -+ -+ cstate->cs_activate = lq_spi_internal_cs_activate; -+ cstate->cs_deactivate = lq_spi_internal_cs_deactivate; -+ } -+ -+ return 0; -+} -+ -+static void lq_spi_cleanup(struct spi_device *spi) -+{ -+ struct lq_spi_controller_data *cdata = spi->controller_data; -+ struct lq_spi_controller_state *cstate = spi->controller_state; -+ unsigned gpio; -+ -+ if (cdata && cdata->gpio) -+ gpio = cdata->gpio; -+ else -+ gpio = lq_spi_cs[spi->chip_select].gpio; -+ -+ gpio_free(gpio); -+ kfree(cstate); -+} -+ -+static void lq_spi_txfifo_write(struct lq_spi *hw) -+{ -+ u32 fstat, data; -+ u16 fifo_space; -+ -+ /* Determine how much FIFOs are free for TX data */ -+ fstat = lq_spi_reg_read(hw, LQ_SPI_FSTAT); -+ fifo_space = hw->txfs - ((fstat >> LQ_SPI_FSTAT_TXFFL_SHIFT) & -+ LQ_SPI_FSTAT_TXFFL_MASK); -+ -+ if (!fifo_space) -+ return; -+ -+ while (hw->tx_cnt < hw->len && fifo_space) { -+ data = hw->get_tx(hw); -+ lq_spi_reg_write(hw, data, LQ_SPI_TB); -+ fifo_space--; -+ } -+} -+ -+static void lq_spi_rxfifo_read(struct lq_spi *hw) -+{ -+ u32 fstat, data, *rx32; -+ u16 fifo_fill; -+ u8 rxbv, shift, *rx8; -+ -+ /* Determine how much FIFOs are filled with RX data */ -+ fstat = lq_spi_reg_read(hw, LQ_SPI_FSTAT); -+ fifo_fill = ((fstat >> LQ_SPI_FSTAT_RXFFL_SHIFT) -+ & LQ_SPI_FSTAT_RXFFL_MASK); -+ -+ if (!fifo_fill) -+ return; -+ -+ /* -+ * The 32 bit FIFO is always used completely independent from the -+ * bits_per_word value. Thus four bytes have to be read at once -+ * per FIFO. -+ */ -+ rx32 = (u32 *) hw->rx; -+ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { -+ *rx32++ = lq_spi_reg_read(hw, LQ_SPI_RB); -+ hw->rx_cnt += 4; -+ hw->rx += 4; -+ fifo_fill--; -+ } -+ -+ /* -+ * If there are remaining bytes, read byte count from STAT.RXBV -+ * register and read the data byte-wise. -+ */ -+ while (fifo_fill && hw->rx_cnt < hw->len) { -+ rxbv = (lq_spi_reg_read(hw, LQ_SPI_STAT) >> -+ LQ_SPI_STAT_RXBV_SHIFT) & LQ_SPI_STAT_RXBV_MASK; -+ data = lq_spi_reg_read(hw, LQ_SPI_RB); -+ -+ shift = (rxbv - 1) * 8; -+ rx8 = hw->rx; -+ -+ while (rxbv) { -+ *rx8++ = (data >> shift) & 0xFF; -+ rxbv--; -+ shift -= 8; -+ hw->rx_cnt++; -+ hw->rx++; -+ } -+ -+ fifo_fill--; -+ } -+} -+ -+static void lq_spi_rxreq_set(struct lq_spi *hw) -+{ -+ u32 rxreq, rxreq_max, rxtodo; -+ -+ rxtodo = lq_spi_reg_read(hw, LQ_SPI_RXCNT) & LQ_SPI_RXCNT_TODO_MASK; -+ -+ /* -+ * In RX-only mode the serial clock is activated only after writing -+ * the expected amount of RX bytes into RXREQ register. -+ * To avoid receive overflows at high clocks it is better to request -+ * only the amount of bytes that fits into all FIFOs. This value -+ * depends on the FIFO size implemented in hardware. -+ */ -+ rxreq = hw->len - hw->rx_cnt; -+ rxreq_max = hw->rxfs << 2; -+ rxreq = min(rxreq_max, rxreq); -+ -+ if (!rxtodo && rxreq) -+ lq_spi_reg_write(hw, rxreq, LQ_SPI_RXREQ); -+} -+ -+static inline void lq_spi_complete(struct lq_spi *hw) -+{ -+ complete(&hw->done); -+} -+ -+irqreturn_t lq_spi_tx_irq(int irq, void *data) -+{ -+ struct lq_spi *hw = data; -+ unsigned long flags; -+ int completed = 0; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ if (hw->tx_cnt < hw->len) -+ lq_spi_txfifo_write(hw); -+ -+ if (hw->tx_cnt == hw->len) -+ completed = 1; -+ -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ if (completed) -+ lq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+irqreturn_t lq_spi_rx_irq(int irq, void *data) -+{ -+ struct lq_spi *hw = data; -+ unsigned long flags; -+ int completed = 0; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ if (hw->rx_cnt < hw->len) { -+ lq_spi_rxfifo_read(hw); -+ -+ if (hw->tx && hw->tx_cnt < hw->len) -+ lq_spi_txfifo_write(hw); -+ } -+ -+ if (hw->rx_cnt == hw->len) -+ completed = 1; -+ else if (!hw->tx) -+ lq_spi_rxreq_set(hw); -+ -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ if (completed) -+ lq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+irqreturn_t lq_spi_err_irq(int irq, void *data) -+{ -+ struct lq_spi *hw = data; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&hw->lock, flags); -+ -+ /* Disable all interrupts */ -+ lq_spi_reg_clearbit(hw, LQ_SPI_IRNEN_ALL, LQ_SPI_IRNEN); -+ -+ /* Clear all error flags */ -+ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_CLR_ERRORS, LQ_SPI_WHBSTATE); -+ -+ /* Flush FIFOs */ -+ lq_spi_reg_setbit(hw, LQ_SPI_RXFCON_RXFLU, LQ_SPI_RXFCON); -+ lq_spi_reg_setbit(hw, LQ_SPI_TXFCON_TXFLU, LQ_SPI_TXFCON); -+ -+ hw->status = -EIO; -+ spin_unlock_irqrestore(&hw->lock, flags); -+ -+ lq_spi_complete(hw); -+ -+ return IRQ_HANDLED; -+} -+ -+static int lq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct lq_spi *hw = lq_spi_to_hw(spi); -+ u32 irq_flags = 0; -+ -+ hw->tx = t->tx_buf; -+ hw->rx = t->rx_buf; -+ hw->len = t->len; -+ hw->tx_cnt = 0; -+ hw->rx_cnt = 0; -+ hw->status = 0; -+ INIT_COMPLETION(hw->done); -+ -+ lq_spi_xmit_set(hw, t); -+ -+ /* Enable error interrupts */ -+ lq_spi_reg_setbit(hw, LQ_SPI_IRNEN_E, LQ_SPI_IRNEN); -+ -+ if (hw->tx) { -+ /* Initially fill TX FIFO with as much data as possible */ -+ lq_spi_txfifo_write(hw); -+ irq_flags |= LQ_SPI_IRNEN_T; -+ -+ /* Always enable RX interrupt in Full Duplex mode */ -+ if (hw->rx) -+ irq_flags |= LQ_SPI_IRNEN_R; -+ } else if (hw->rx) { -+ /* Start RX clock */ -+ lq_spi_rxreq_set(hw); -+ -+ /* Enable RX interrupt to receive data from RX FIFOs */ -+ irq_flags |= LQ_SPI_IRNEN_R; -+ } -+ -+ /* Enable TX or RX interrupts */ -+ lq_spi_reg_setbit(hw, irq_flags, LQ_SPI_IRNEN); -+ wait_for_completion_interruptible(&hw->done); -+ -+ /* Disable all interrupts */ -+ lq_spi_reg_clearbit(hw, LQ_SPI_IRNEN_ALL, LQ_SPI_IRNEN); -+ -+ /* -+ * Return length of current transfer for bitbang utility code if -+ * no errors occured during transmission. -+ */ -+ if (!hw->status) -+ hw->status = hw->len; -+ -+ return hw->status; -+} -+ -+static const struct lq_spi_irq_map lq_spi_irqs[] = { -+ { "spi_tx", lq_spi_tx_irq }, -+ { "spi_rx", lq_spi_rx_irq }, -+ { "spi_err", lq_spi_err_irq }, -+}; -+ -+static int __init lq_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct resource *r; -+ struct lq_spi *hw; -+ struct lq_spi_platform_data *pdata = pdev->dev.platform_data; -+ int ret, i; -+ u32 data, id; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct lq_spi)); -+ if (!master) { -+ dev_err(&pdev->dev, "spi_alloc_master\n"); -+ ret = -ENOMEM; -+ goto err; -+ } -+ -+ hw = spi_master_get_devdata(master); -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (r == NULL) { -+ dev_err(&pdev->dev, "platform_get_resource\n"); -+ ret = -ENOENT; -+ goto err_master; -+ } -+ -+ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), -+ pdev->name); -+ if (!r) { -+ dev_err(&pdev->dev, "devm_request_mem_region\n"); -+ ret = -ENXIO; -+ goto err_master; -+ } -+ -+ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); -+ if (!hw->base) { -+ dev_err(&pdev->dev, "devm_ioremap_nocache\n"); -+ ret = -ENXIO; -+ goto err_master; -+ } -+ -+ hw->clk = clk_get(&pdev->dev, "fpi"); -+ if (IS_ERR(hw->clk)) { -+ dev_err(&pdev->dev, "clk_get\n"); -+ ret = PTR_ERR(hw->clk); -+ goto err_master; -+ } -+ -+ memset(hw->irq, 0, sizeof(hw->irq)); -+ for (i = 0; i < ARRAY_SIZE(lq_spi_irqs); i++) { -+ ret = platform_get_irq_byname(pdev, lq_spi_irqs[i].name); -+ if (0 > ret) { -+ dev_err(&pdev->dev, "platform_get_irq_byname\n"); -+ goto err_irq; -+ } -+ -+ hw->irq[i] = ret; -+ ret = request_irq(hw->irq[i], lq_spi_irqs[i].handler, -+ 0, lq_spi_irqs[i].name, hw); -+ if (ret) { -+ dev_err(&pdev->dev, "request_irq\n"); -+ goto err_irq; -+ } -+ } -+ -+ hw->bitbang.master = spi_master_get(master); -+ hw->bitbang.chipselect = lq_spi_chipselect; -+ hw->bitbang.setup_transfer = lq_spi_setup_transfer; -+ hw->bitbang.txrx_bufs = lq_spi_txrx_bufs; -+ -+ master->bus_num = pdev->id; -+ master->num_chipselect = pdata->num_chipselect; -+ master->setup = lq_spi_setup; -+ master->cleanup = lq_spi_cleanup; -+ -+ hw->dev = &pdev->dev; -+ init_completion(&hw->done); -+ spin_lock_init(&hw->lock); -+ -+ /* Set GPIO alternate functions to SPI */ -+ lq_gpio_request(LQ_SPI_GPIO_DI, 1, 0, 0, "spi-di"); -+ lq_gpio_request(LQ_SPI_GPIO_DO, 1, 0, 1, "spi-do"); -+ lq_gpio_request(LQ_SPI_GPIO_CLK, 1, 0, 1, "spi-clk"); -+ -+ lq_spi_hw_enable(hw); -+ -+ /* Read module capabilities */ -+ id = lq_spi_reg_read(hw, LQ_SPI_ID); -+ hw->txfs = (id >> LQ_SPI_ID_TXFS_SHIFT) & LQ_SPI_ID_TXFS_MASK; -+ hw->rxfs = (id >> LQ_SPI_ID_TXFS_SHIFT) & LQ_SPI_ID_TXFS_MASK; -+ hw->dma_support = (id & LQ_SPI_ID_CFG) ? 1 : 0; -+ -+ lq_spi_config_mode_set(hw); -+ -+ /* Enable error checking, disable TX/RX, set idle value high */ -+ data = LQ_SPI_CON_RUEN | LQ_SPI_CON_AEN | -+ LQ_SPI_CON_TEN | LQ_SPI_CON_REN | -+ LQ_SPI_CON_TXOFF | LQ_SPI_CON_RXOFF | LQ_SPI_CON_IDLE; -+ lq_spi_reg_write(hw, data, LQ_SPI_CON); -+ -+ /* Enable master mode and clear error flags */ -+ lq_spi_reg_write(hw, LQ_SPI_WHBSTATE_SETMS | -+ LQ_SPI_WHBSTATE_CLR_ERRORS, LQ_SPI_WHBSTATE); -+ -+ /* Reset GPIO/CS registers */ -+ lq_spi_reg_write(hw, 0x0, LQ_SPI_GPOCON); -+ lq_spi_reg_write(hw, 0xFF00, LQ_SPI_FGPO); -+ -+ /* Enable and flush FIFOs */ -+ lq_spi_reset_fifos(hw); -+ -+ ret = spi_bitbang_start(&hw->bitbang); -+ if (ret) { -+ dev_err(&pdev->dev, "spi_bitbang_start\n"); -+ goto err_bitbang; -+ } -+ -+ platform_set_drvdata(pdev, hw); -+ -+ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", -+ id & LQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); -+ -+ return 0; -+ -+err_bitbang: -+ lq_spi_hw_disable(hw); -+ -+err_irq: -+ clk_put(hw->clk); -+ -+ for (; i > 0; i--) -+ free_irq(hw->irq[i], hw); -+ -+err_master: -+ spi_master_put(master); -+ -+err: -+ return ret; -+} -+ -+static int __exit lq_spi_remove(struct platform_device *pdev) -+{ -+ struct lq_spi *hw = platform_get_drvdata(pdev); -+ int ret, i; -+ -+ ret = spi_bitbang_stop(&hw->bitbang); -+ if (ret) -+ return ret; -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ lq_spi_config_mode_set(hw); -+ lq_spi_hw_disable(hw); -+ -+ for (i = 0; i < ARRAY_SIZE(hw->irq); i++) -+ if (0 < hw->irq[i]) -+ free_irq(hw->irq[i], hw); -+ -+ gpio_free(LQ_SPI_GPIO_DI); -+ gpio_free(LQ_SPI_GPIO_DO); -+ gpio_free(LQ_SPI_GPIO_CLK); -+ -+ clk_put(hw->clk); -+ spi_master_put(hw->bitbang.master); -+ -+ return 0; -+} -+ -+static struct platform_driver lq_spi_driver = { -+ .driver = { -+ .name = "ltq-spi", -+ .owner = THIS_MODULE, -+ }, -+ .remove = __exit_p(lq_spi_remove), -+}; -+ -+static int __init lq_spi_init(void) -+{ -+ return platform_driver_probe(&lq_spi_driver, lq_spi_probe); -+} -+module_init(lq_spi_init); -+ -+static void __exit lq_spi_exit(void) -+{ -+ platform_driver_unregister(&lq_spi_driver); -+} -+module_exit(lq_spi_exit); -+ -+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); -+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:ltq-spi"); |