1 files changed, 0 insertions, 154 deletions
diff --git a/target/linux/mediatek/patches-4.9/0002-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch b/target/linux/mediatek/patches-4.9/0002-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch
deleted file mode 100644
index 9dd6fcd..0000000
--- a/target/linux/mediatek/patches-4.9/0002-dt-bindings-add-MediaTek-PCIe-binding-documentation.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-From ad2d4df46d8ef6a7aab20f0b668fa7db5257cbea Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 6 Jan 2016 21:55:10 +0100
-Subject: [PATCH 02/57] dt-bindings: add MediaTek PCIe binding documentation
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/pci/mediatek-pcie.txt      | 140 +++++++++++++++++++++
- 1 file changed, 140 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
-@@ -0,0 +1,140 @@
-+Mediatek PCIe controller
-+
-+Required properties:
-+- compatible: Should be one of:
-+	- "mediatek,mt2701-pcie"
-+	- "mediatek,mt7623-pcie"
-+- device_type: Must be "pci"
-+- reg: A list of physical base address and length for each set of controller
-+  registers. A list of register ranges to use. Must contain an
-+    entry for each entry in the reg-names property.
-+- reg-names: Must include the following entries:
-+  "pcie": PCIe registers
-+  "pcie phy0": PCIe PHY0 registers
-+  "pcie phy1": PCIe PHY0 registers
-+  "pcie phy2": PCIe PHY0 registers
-+- interrupts: A list of interrupt outputs of the controller. Must contain an
-+  entry for each entry in the interrupt-names property.
-+- interrupt-names: Must include the following entries:
-+  "pcie0": The interrupt that is asserted for port0
-+  "pcie1": The interrupt that is asserted for port1
-+  "pcie2": The interrupt that is asserted for port2
-+- bus-range: Range of bus numbers associated with this controller
-+- #address-cells: Address representation for root ports (must be 3)
-+- #size-cells: Size representation for root ports (must be 2)
-+- ranges: Describes the translation of addresses for root ports and standard
-+  PCI regions. The entries must be 6 cells each.
-+  Please refer to the standard PCI bus binding document for a more detailed
-+  explanation.
-+- #interrupt-cells: Size representation for interrupts (must be 1)
-+- clocks: Must contain an entry for each entry in clock-names.
-+  See ../clocks/clock-bindings.txt for details.
-+- clock-names: Must include the following entries:
-+  - pcie0
-+  - pcie1
-+  - pcie2
-+- resets: Must contain an entry for each entry in reset-names.
-+  See ../reset/reset.txt for details.
-+- reset-names: Must include the following entries:
-+  - pcie0
-+  - pcie1
-+  - pcie2
-+- mediatek,hifsys: Must contain a phandle to the HIFSYS syscon range.
-+Root ports are defined as subnodes of the PCIe controller node.
-+
-+Required properties:
-+- device_type: Must be "pci"
-+- assigned-addresses: Address and size of the port configuration registers
-+- reg: PCI bus address of the root port
-+- #address-cells: Must be 3
-+- #size-cells: Must be 2
-+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
-+  property is sufficient.
-+
-+Example:
-+
-+SoC DTSI:
-+
-+	hifsys: clock-controller@1a000000 {
-+		compatible = "mediatek,mt7623-hifsys",
-+			     "mediatek,mt2701-hifsys",
-+			     "syscon";
-+		reg = <0 0x1a000000 0 0x1000>;
-+		#clock-cells = <1>;
-+		#reset-cells = <1>;
-+	};
-+
-+	pcie-controller@1a140000 {
-+		compatible = "mediatek,mt7623-pcie";
-+		device_type = "pci";
-+		reg = <0 0x1a140000 0 0x8000>, /* PCI-Express registers */
-+		      <0 0x1a149000 0 0x1000>, /* PCI-Express PHY0 */
-+		      <0 0x1a14a000 0 0x1000>, /* PCI-Express PHY1 */
-+		      <0 0x1a244000 0 0x1000>; /* PCI-Express PHY2 */
-+		reg-names = "pcie", "pcie phy0", "pcie phy1", "pcie phy2";
-+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
-+			     <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
-+			     <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "pcie0", "pcie1", "pcie2";
-+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
-+		clock-names = "pcie";
-+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
-+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
-+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
-+		reset-names = "pcie0", "pice1", "pcie2";
-+
-+		bus-range = <0x00 0xff>;
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+
-+                mediatek,hifsys = <&hifsys>;
-+
-+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* io space */
-+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* pci memory */
-+
-+		status = "disabled";
-+
-+		pcie@1,0 {
-+			device_type = "pci";
-+			reg = <0x0800 0 0 0 0>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			ranges;
-+
-+			status = "disabled";
-+		};
-+
-+		pcie@2,0{
-+			device_type = "pci";
-+			reg = <0x1000 0 0 0 0>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			ranges;
-+
-+			status = "disabled";
-+		};
-+
-+		pcie@3,0{
-+			device_type = "pci";
-+			reg = <0x1800 0 0 0 0>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
-+			ranges;
-+
-+			status = "disabled";
-+		};
-+	};
-+
-+Board DTS:
-+
-+	pcie-controller {
-+		status = "okay";
-+
-+		pci@1,0 {
-+			status = "okay";
-+		};
-+	};