diff options
Diffstat (limited to 'target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch')
| -rw-r--r-- | target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch b/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch new file mode 100644 index 0000000..c556ac0 --- /dev/null +++ b/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch @@ -0,0 +1,57 @@ +From 9b799b8a4ecbf560f8fb996e8e5147a8f7b9a1b3 Mon Sep 17 00:00:00 2001 +From: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed, 13 May 2015 10:52:41 +0200 +Subject: [PATCH 22/76] dt-bindings: thermal: Add binding document for + Mediatek thermal controller + +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> +--- + .../bindings/thermal/mediatek-thermal.txt | 36 ++++++++++++++++++++ + 1 file changed, 36 insertions(+) + create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt + +diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +new file mode 100644 +index 0000000..adf5d2c +--- /dev/null ++++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +@@ -0,0 +1,36 @@ ++* Mediatek Thermal ++ ++This describes the device tree binding for the Mediatek thermal controller ++which measures the on-SoC temperatures. This device does not have its own ADC, ++instead it directly controls the AUXADC via AHB bus accesses. For this reason ++this device needs phandles to the AUXADC. ++ ++Required properties: ++- compatible: "mediatek,mt8173-thermal" ++- reg: Address range of the thermal controller ++- interrupts: IRQ for the thermal controller ++- clocks, clock-names: Clocks needed for the thermal controller. required ++ clocks are: ++ "therm": Main clock needed for register access ++ "auxadc": The AUXADC clock ++- resets, reset-names: Reference to the reset controller controlling the thermal ++ controller. Required reset-names: ++ "therm": The main reset line ++- auxadc: A phandle to the AUXADC which the thermal controller uses ++- apmixedsys: A phandle to the APMIXEDSYS controller. ++- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description ++ ++Example: ++ ++ thermal: thermal@1100b000 { ++ #thermal-sensor-cells = <1>; ++ compatible = "mediatek,mt8173-thermal"; ++ reg = <0 0x1100b000 0 0x1000>; ++ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; ++ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; ++ clock-names = "therm", "auxadc"; ++ resets = <&pericfg MT8173_PERI_THERM_SW_RST>; ++ reset-names = "therm"; ++ auxadc = <&auxadc>; ++ apmixedsys = <&apmixedsys>; ++ }; +-- +1.7.10.4 + |