diff options
Diffstat (limited to 'target/linux/mediatek/patches/0026-spi-mediatek-Add-spi-bus-for-Mediatek-MT8173.patch')
-rw-r--r-- | target/linux/mediatek/patches/0026-spi-mediatek-Add-spi-bus-for-Mediatek-MT8173.patch | 679 |
1 files changed, 679 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches/0026-spi-mediatek-Add-spi-bus-for-Mediatek-MT8173.patch b/target/linux/mediatek/patches/0026-spi-mediatek-Add-spi-bus-for-Mediatek-MT8173.patch new file mode 100644 index 0000000..3466581 --- /dev/null +++ b/target/linux/mediatek/patches/0026-spi-mediatek-Add-spi-bus-for-Mediatek-MT8173.patch @@ -0,0 +1,679 @@ +From 047222cfefe97ef8706f03117bc8deada4cb4ddd Mon Sep 17 00:00:00 2001 +From: Leilk Liu <leilk.liu@mediatek.com> +Date: Fri, 8 May 2015 16:55:42 +0800 +Subject: [PATCH 26/76] spi: mediatek: Add spi bus for Mediatek MT8173 + +This patch adds basic spi bus for MT8173. + +Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> +--- + drivers/spi/Kconfig | 10 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-mt65xx.c | 622 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 633 insertions(+) + create mode 100644 drivers/spi/spi-mt65xx.c + +diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig +index 72b0590..53dbea3 100644 +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -325,6 +325,16 @@ config SPI_MESON_SPIFC + This enables master mode support for the SPIFC (SPI flash + controller) available in Amlogic Meson SoCs. + ++config SPI_MT65XX ++ tristate "MediaTek SPI controller" ++ depends on ARCH_MEDIATEK || COMPILE_TEST ++ select SPI_BITBANG ++ help ++ This selects the MediaTek(R) SPI bus driver. ++ If you want to use MediaTek(R) SPI interface, ++ say Y or M here.If you are not sure, say N. ++ SPI drivers for Mediatek mt65XX series ARM SoCs. ++ + config SPI_OC_TINY + tristate "OpenCores tiny SPI" + depends on GPIOLIB +diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile +index d8cbf65..ab332ef 100644 +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o + obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o + obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o + obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o ++obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o + obj-$(CONFIG_SPI_MXS) += spi-mxs.o + obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o + obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o +diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c +new file mode 100644 +index 0000000..92c119d +--- /dev/null ++++ b/drivers/spi/spi-mt65xx.c +@@ -0,0 +1,622 @@ ++/* ++ * Copyright (c) 2015 MediaTek Inc. ++ * Author: Leilk Liu <leilk.liu@mediatek.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/ioport.h> ++#include <linux/errno.h> ++#include <linux/spi/spi.h> ++#include <linux/workqueue.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++#include <linux/interrupt.h> ++#include <linux/irqreturn.h> ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/sched.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/of_address.h> ++#include <linux/kernel.h> ++#include <linux/spi/spi_bitbang.h> ++#include <linux/gpio.h> ++#include <linux/module.h> ++#include <linux/of_gpio.h> ++ ++#define SPI_CFG0_REG 0x0000 ++#define SPI_CFG1_REG 0x0004 ++#define SPI_TX_SRC_REG 0x0008 ++#define SPI_RX_DST_REG 0x000c ++#define SPI_CMD_REG 0x0018 ++#define SPI_STATUS0_REG 0x001c ++#define SPI_PAD_SEL_REG 0x0024 ++ ++#define SPI_CFG0_SCK_HIGH_OFFSET 0 ++#define SPI_CFG0_SCK_LOW_OFFSET 8 ++#define SPI_CFG0_CS_HOLD_OFFSET 16 ++#define SPI_CFG0_CS_SETUP_OFFSET 24 ++ ++#define SPI_CFG0_SCK_HIGH_MASK 0xff ++#define SPI_CFG0_SCK_LOW_MASK 0xff00 ++#define SPI_CFG0_CS_HOLD_MASK 0xff0000 ++#define SPI_CFG0_CS_SETUP_MASK 0xff000000 ++ ++#define SPI_CFG1_CS_IDLE_OFFSET 0 ++#define SPI_CFG1_PACKET_LOOP_OFFSET 8 ++#define SPI_CFG1_PACKET_LENGTH_OFFSET 16 ++#define SPI_CFG1_GET_TICK_DLY_OFFSET 30 ++ ++#define SPI_CFG1_CS_IDLE_MASK 0xff ++#define SPI_CFG1_PACKET_LOOP_MASK 0xff00 ++#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 ++#define SPI_CFG1_GET_TICK_DLY_MASK 0xc0000000 ++ ++#define SPI_CMD_ACT_OFFSET 0 ++#define SPI_CMD_RESUME_OFFSET 1 ++#define SPI_CMD_RST_OFFSET 2 ++#define SPI_CMD_PAUSE_EN_OFFSET 4 ++#define SPI_CMD_DEASSERT_OFFSET 5 ++#define SPI_CMD_CPHA_OFFSET 8 ++#define SPI_CMD_CPOL_OFFSET 9 ++#define SPI_CMD_RX_DMA_OFFSET 10 ++#define SPI_CMD_TX_DMA_OFFSET 11 ++#define SPI_CMD_TXMSBF_OFFSET 12 ++#define SPI_CMD_RXMSBF_OFFSET 13 ++#define SPI_CMD_RX_ENDIAN_OFFSET 14 ++#define SPI_CMD_TX_ENDIAN_OFFSET 15 ++#define SPI_CMD_FINISH_IE_OFFSET 16 ++#define SPI_CMD_PAUSE_IE_OFFSET 17 ++ ++#define SPI_CMD_RESUME_MASK 0x2 ++#define SPI_CMD_RST_MASK 0x4 ++#define SPI_CMD_PAUSE_EN_MASK 0x10 ++#define SPI_CMD_DEASSERT_MASK 0x20 ++#define SPI_CMD_CPHA_MASK 0x100 ++#define SPI_CMD_CPOL_MASK 0x200 ++#define SPI_CMD_RX_DMA_MASK 0x400 ++#define SPI_CMD_TX_DMA_MASK 0x800 ++#define SPI_CMD_TXMSBF_MASK 0x1000 ++#define SPI_CMD_RXMSBF_MASK 0x2000 ++#define SPI_CMD_RX_ENDIAN_MASK 0x4000 ++#define SPI_CMD_TX_ENDIAN_MASK 0x8000 ++#define SPI_CMD_FINISH_IE_MASK 0x10000 ++ ++#define COMPAT_MT6589 (0x1 << 0) ++#define COMPAT_MT8173 (0x1 << 1) ++ ++#define MT8173_MAX_PAD_SEL 3 ++ ++#define IDLE 0 ++#define INPROGRESS 1 ++#define PAUSED 2 ++ ++#define PACKET_SIZE 1024 ++ ++struct mtk_chip_config { ++ u32 setuptime; ++ u32 holdtime; ++ u32 high_time; ++ u32 low_time; ++ u32 cs_idletime; ++ u32 tx_mlsb; ++ u32 rx_mlsb; ++ u32 tx_endian; ++ u32 rx_endian; ++ u32 pause; ++ u32 finish_intr; ++ u32 deassert; ++ u32 tckdly; ++}; ++ ++struct mtk_spi_ddata { ++ struct spi_bitbang bitbang; ++ void __iomem *base; ++ u32 irq; ++ u32 state; ++ u32 platform_compat; ++ u32 pad_sel; ++ struct clk *clk; ++ ++ const u8 *tx_buf; ++ u8 *rx_buf; ++ u32 tx_len, rx_len; ++ struct completion done; ++}; ++ ++/* ++ * A piece of default chip info unless the platform ++ * supplies it. ++ */ ++static const struct mtk_chip_config mtk_default_chip_info = { ++ .setuptime = 10, ++ .holdtime = 12, ++ .high_time = 6, ++ .low_time = 6, ++ .cs_idletime = 12, ++ .rx_mlsb = 1, ++ .tx_mlsb = 1, ++ .tx_endian = 0, ++ .rx_endian = 0, ++ .pause = 0, ++ .finish_intr = 1, ++ .deassert = 0, ++ .tckdly = 0, ++}; ++ ++static const struct of_device_id mtk_spi_of_match[] = { ++ { .compatible = "mediatek,mt6589-spi", .data = (void *)COMPAT_MT6589}, ++ { .compatible = "mediatek,mt8173-spi", .data = (void *)COMPAT_MT8173}, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, mtk_spi_of_match); ++ ++static void mtk_spi_reset(struct mtk_spi_ddata *mdata) ++{ ++ u32 reg_val; ++ ++ /*set the software reset bit in SPI_CMD_REG.*/ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_RST_MASK; ++ reg_val |= 1 << SPI_CMD_RST_OFFSET; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_RST_MASK; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++} ++ ++static void mtk_set_pause_bit(struct mtk_spi_ddata *mdata) ++{ ++ u32 reg_val; ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val |= 1 << SPI_CMD_PAUSE_EN_OFFSET; ++ reg_val |= 1 << SPI_CMD_PAUSE_IE_OFFSET; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++} ++ ++static void mtk_clear_pause_bit(struct mtk_spi_ddata *mdata) ++{ ++ u32 reg_val; ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_PAUSE_EN_MASK; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++} ++ ++static int mtk_spi_config(struct mtk_spi_ddata *mdata, ++ struct mtk_chip_config *chip_config) ++{ ++ u32 reg_val; ++ ++ /* set the timing */ ++ reg_val = readl(mdata->base + SPI_CFG0_REG); ++ reg_val &= ~(SPI_CFG0_SCK_HIGH_MASK | SPI_CFG0_SCK_LOW_MASK); ++ reg_val &= ~(SPI_CFG0_CS_HOLD_MASK | SPI_CFG0_CS_SETUP_MASK); ++ reg_val |= ((chip_config->high_time - 1) << SPI_CFG0_SCK_HIGH_OFFSET); ++ reg_val |= ((chip_config->low_time - 1) << SPI_CFG0_SCK_LOW_OFFSET); ++ reg_val |= ((chip_config->holdtime - 1) << SPI_CFG0_CS_HOLD_OFFSET); ++ reg_val |= ((chip_config->setuptime - 1) << SPI_CFG0_CS_SETUP_OFFSET); ++ writel(reg_val, mdata->base + SPI_CFG0_REG); ++ ++ reg_val = readl(mdata->base + SPI_CFG1_REG); ++ reg_val &= ~SPI_CFG1_CS_IDLE_MASK; ++ reg_val |= ((chip_config->cs_idletime - 1) << SPI_CFG1_CS_IDLE_OFFSET); ++ reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK; ++ reg_val |= ((chip_config->tckdly) << SPI_CFG1_GET_TICK_DLY_OFFSET); ++ writel(reg_val, mdata->base + SPI_CFG1_REG); ++ ++ /* set the mlsbx and mlsbtx */ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~(SPI_CMD_TX_ENDIAN_MASK | SPI_CMD_RX_ENDIAN_MASK); ++ reg_val &= ~(SPI_CMD_TXMSBF_MASK | SPI_CMD_RXMSBF_MASK); ++ reg_val |= (chip_config->tx_mlsb << SPI_CMD_TXMSBF_OFFSET); ++ reg_val |= (chip_config->rx_mlsb << SPI_CMD_RXMSBF_OFFSET); ++ reg_val |= (chip_config->tx_endian << SPI_CMD_TX_ENDIAN_OFFSET); ++ reg_val |= (chip_config->rx_endian << SPI_CMD_RX_ENDIAN_OFFSET); ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ ++ /* set finish and pause interrupt always enable */ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_FINISH_IE_MASK; ++ reg_val |= (chip_config->finish_intr << SPI_CMD_FINISH_IE_OFFSET); ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val |= 1 << SPI_CMD_TX_DMA_OFFSET; ++ reg_val |= 1 << SPI_CMD_RX_DMA_OFFSET; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ ++ /* set deassert mode */ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_DEASSERT_MASK; ++ reg_val |= (chip_config->deassert << SPI_CMD_DEASSERT_OFFSET); ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ ++ /* pad select */ ++ if (mdata->platform_compat & COMPAT_MT8173) ++ writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG); ++ ++ return 0; ++} ++ ++static int mtk_spi_setup_transfer(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ u32 reg_val; ++ struct spi_master *master = spi->master; ++ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master); ++ struct spi_message *m = master->cur_msg; ++ struct mtk_chip_config *chip_config; ++ ++ u8 cpha = spi->mode & SPI_CPHA ? 1 : 0; ++ u8 cpol = spi->mode & SPI_CPOL ? 1 : 0; ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~(SPI_CMD_CPHA_MASK | SPI_CMD_CPOL_MASK); ++ reg_val |= (cpha << SPI_CMD_CPHA_OFFSET); ++ reg_val |= (cpol << SPI_CMD_CPOL_OFFSET); ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++ ++ if (t->cs_change) { ++ if (!(list_is_last(&t->transfer_list, &m->transfers))) ++ mdata->state = IDLE; ++ } else { ++ mdata->state = IDLE; ++ mtk_spi_reset(mdata); ++ } ++ ++ chip_config = (struct mtk_chip_config *)spi->controller_data; ++ if (!chip_config) { ++ chip_config = (void *)&mtk_default_chip_info; ++ spi->controller_data = chip_config; ++ mdata->state = IDLE; ++ } ++ ++ mtk_spi_config(mdata, chip_config); ++ ++ return 0; ++} ++ ++static void mtk_spi_chipselect(struct spi_device *spi, int is_on) ++{ ++ struct mtk_spi_ddata *mdata = spi_master_get_devdata(spi->master); ++ ++ switch (is_on) { ++ case BITBANG_CS_ACTIVE: ++ mtk_set_pause_bit(mdata); ++ break; ++ case BITBANG_CS_INACTIVE: ++ mtk_clear_pause_bit(mdata); ++ break; ++ } ++} ++ ++static void mtk_spi_start_transfer(struct mtk_spi_ddata *mdata) ++{ ++ u32 reg_val; ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val |= 1 << SPI_CMD_ACT_OFFSET; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++} ++ ++static void mtk_spi_resume_transfer(struct mtk_spi_ddata *mdata) ++{ ++ u32 reg_val; ++ ++ reg_val = readl(mdata->base + SPI_CMD_REG); ++ reg_val &= ~SPI_CMD_RESUME_MASK; ++ reg_val |= 1 << SPI_CMD_RESUME_OFFSET; ++ writel(reg_val, mdata->base + SPI_CMD_REG); ++} ++ ++static int mtk_spi_setup_packet(struct mtk_spi_ddata *mdata, ++ struct spi_transfer *xfer) ++{ ++ struct device *dev = &mdata->bitbang.master->dev; ++ u32 packet_size, packet_loop, reg_val; ++ ++ packet_size = min_t(unsigned, xfer->len, PACKET_SIZE); ++ ++ /* mtk hw has the restriction that xfer len must be a multiple of 1024, ++ * when it is greater than 1024bytes. ++ */ ++ if (xfer->len % packet_size) { ++ dev_err(dev, "ERROR!The lens must be a multiple of %d, your len %d\n", ++ PACKET_SIZE, xfer->len); ++ return -EINVAL; ++ } ++ ++ packet_loop = xfer->len / packet_size; ++ ++ reg_val = readl(mdata->base + SPI_CFG1_REG); ++ reg_val &= ~(SPI_CFG1_PACKET_LENGTH_MASK + SPI_CFG1_PACKET_LOOP_MASK); ++ reg_val |= (packet_size - 1) << SPI_CFG1_PACKET_LENGTH_OFFSET; ++ reg_val |= (packet_loop - 1) << SPI_CFG1_PACKET_LOOP_OFFSET; ++ writel(reg_val, mdata->base + SPI_CFG1_REG); ++ ++ return 0; ++} ++ ++static int mtk_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *xfer) ++{ ++ struct spi_master *master = spi->master; ++ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master); ++ struct device *dev = &mdata->bitbang.master->dev; ++ int cmd, ret; ++ ++ /* mtk spi hw tx/rx have 4bytes aligned restriction, ++ * so kmalloc tx/rx buffer to workaround here. ++ */ ++ mdata->tx_buf = NULL; ++ mdata->rx_buf = NULL; ++ if (xfer->tx_buf) { ++ mdata->tx_buf = kmalloc(xfer->len, GFP_KERNEL); ++ if (!mdata->tx_buf) { ++ dev_err(dev, "malloc tx_buf failed.\n"); ++ ret = -ENOMEM; ++ goto err_free; ++ } ++ memcpy((void *)mdata->tx_buf, xfer->tx_buf, xfer->len); ++ } ++ if (xfer->rx_buf) { ++ mdata->rx_buf = kmalloc(xfer->len, GFP_KERNEL); ++ if (!mdata->rx_buf) { ++ dev_err(dev, "malloc rx_buf failed.\n"); ++ ret = -ENOMEM; ++ goto err_free; ++ } ++ } ++ ++ reinit_completion(&mdata->done); ++ ++ xfer->tx_dma = DMA_ERROR_CODE; ++ xfer->rx_dma = DMA_ERROR_CODE; ++ if (xfer->tx_buf) { ++ xfer->tx_dma = dma_map_single(dev, (void *)mdata->tx_buf, ++ xfer->len, DMA_TO_DEVICE); ++ if (dma_mapping_error(dev, xfer->tx_dma)) { ++ dev_err(dev, "dma mapping tx_buf error.\n"); ++ ret = -ENOMEM; ++ goto err_free; ++ } ++ } ++ if (xfer->rx_buf) { ++ xfer->rx_dma = dma_map_single(dev, mdata->rx_buf, ++ xfer->len, DMA_FROM_DEVICE); ++ if (dma_mapping_error(dev, xfer->rx_dma)) { ++ if (xfer->tx_buf) ++ dma_unmap_single(dev, xfer->tx_dma, ++ xfer->len, DMA_TO_DEVICE); ++ dev_err(dev, "dma mapping rx_buf error.\n"); ++ ret = -ENOMEM; ++ goto err_free; ++ } ++ } ++ ++ ret = mtk_spi_setup_packet(mdata, xfer); ++ if (ret != 0) ++ goto err_free; ++ ++ /* Here is mt8173 HW issue: RX must enable TX, then TX transfer ++ * dummy data; TX don't need to enable RX. so enable TX dma for ++ * RX to workaround. ++ */ ++ cmd = readl(mdata->base + SPI_CMD_REG); ++ if (xfer->tx_buf || (mdata->platform_compat & COMPAT_MT8173)) ++ cmd |= 1 << SPI_CMD_TX_DMA_OFFSET; ++ if (xfer->rx_buf) ++ cmd |= 1 << SPI_CMD_RX_DMA_OFFSET; ++ writel(cmd, mdata->base + SPI_CMD_REG); ++ ++ /* set up the DMA bus address */ ++ if (xfer->tx_dma != DMA_ERROR_CODE) ++ writel(cpu_to_le32(xfer->tx_dma), mdata->base + SPI_TX_SRC_REG); ++ if (xfer->rx_dma != DMA_ERROR_CODE) ++ writel(cpu_to_le32(xfer->rx_dma), mdata->base + SPI_RX_DST_REG); ++ ++ if (mdata->state == IDLE) ++ mtk_spi_start_transfer(mdata); ++ else if (mdata->state == PAUSED) ++ mtk_spi_resume_transfer(mdata); ++ else ++ mdata->state = INPROGRESS; ++ ++ wait_for_completion(&mdata->done); ++ ++ if (xfer->tx_dma != DMA_ERROR_CODE) { ++ dma_unmap_single(dev, xfer->tx_dma, xfer->len, DMA_TO_DEVICE); ++ xfer->tx_dma = DMA_ERROR_CODE; ++ } ++ if (xfer->rx_dma != DMA_ERROR_CODE) { ++ dma_unmap_single(dev, xfer->rx_dma, xfer->len, DMA_FROM_DEVICE); ++ xfer->rx_dma = DMA_ERROR_CODE; ++ } ++ ++ /* spi disable dma */ ++ cmd = readl(mdata->base + SPI_CMD_REG); ++ cmd &= ~SPI_CMD_TX_DMA_MASK; ++ cmd &= ~SPI_CMD_RX_DMA_MASK; ++ writel(cmd, mdata->base + SPI_CMD_REG); ++ ++ if (xfer->rx_buf) ++ memcpy(xfer->rx_buf, mdata->rx_buf, xfer->len); ++ ++ ret = xfer->len; ++ ++err_free: ++ kfree(mdata->tx_buf); ++ kfree(mdata->rx_buf); ++ return ret; ++} ++ ++static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) ++{ ++ struct mtk_spi_ddata *mdata = dev_id; ++ u32 reg_val; ++ ++ reg_val = readl(mdata->base + SPI_STATUS0_REG); ++ if (reg_val & 0x2) ++ mdata->state = PAUSED; ++ else ++ mdata->state = IDLE; ++ complete(&mdata->done); ++ ++ return IRQ_HANDLED; ++} ++ ++static unsigned long mtk_get_device_prop(struct platform_device *pdev) ++{ ++ const struct of_device_id *match; ++ ++ match = of_match_node(mtk_spi_of_match, pdev->dev.of_node); ++ return (unsigned long)match->data; ++} ++ ++static int mtk_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct mtk_spi_ddata *mdata; ++ struct resource *res; ++ int ret; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(struct mtk_spi_ddata)); ++ if (!master) { ++ dev_err(&pdev->dev, "failed to alloc spi master\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, master); ++ ++ master->dev.of_node = pdev->dev.of_node; ++ master->bus_num = pdev->id; ++ master->num_chipselect = 1; ++ master->mode_bits = SPI_CPOL | SPI_CPHA; ++ ++ mdata = spi_master_get_devdata(master); ++ ++ mdata->bitbang.master = master; ++ mdata->bitbang.chipselect = mtk_spi_chipselect; ++ mdata->bitbang.setup_transfer = mtk_spi_setup_transfer; ++ mdata->bitbang.txrx_bufs = mtk_spi_txrx_bufs; ++ mdata->platform_compat = mtk_get_device_prop(pdev); ++ ++ if (mdata->platform_compat & COMPAT_MT8173) { ++ ret = of_property_read_u32(pdev->dev.of_node, "pad-select", ++ &mdata->pad_sel); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to read pad select: %d\n", ++ ret); ++ goto err; ++ } ++ ++ if (mdata->pad_sel > MT8173_MAX_PAD_SEL) { ++ dev_err(&pdev->dev, "wrong pad-select: %u\n", ++ mdata->pad_sel); ++ goto err; ++ } ++ } ++ ++ init_completion(&mdata->done); ++ ++ mdata->clk = devm_clk_get(&pdev->dev, "main"); ++ if (IS_ERR(mdata->clk)) { ++ ret = PTR_ERR(mdata->clk); ++ dev_err(&pdev->dev, "failed to get clock: %d\n", ret); ++ goto err; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ ret = -ENODEV; ++ dev_err(&pdev->dev, "failed to determine base address\n"); ++ goto err; ++ } ++ ++ mdata->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(mdata->base)) { ++ ret = PTR_ERR(mdata->base); ++ goto err; ++ } ++ ++ ret = platform_get_irq(pdev, 0); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to get irq (%d)\n", ret); ++ goto err; ++ } ++ ++ mdata->irq = ret; ++ ++ if (!pdev->dev.dma_mask) ++ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; ++ ++ mdata->bitbang.master->dev.dma_mask = pdev->dev.dma_mask; ++ ++ ret = clk_prepare_enable(mdata->clk); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret); ++ goto err; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, mdata->irq, mtk_spi_interrupt, ++ IRQF_TRIGGER_NONE, dev_name(&pdev->dev), mdata); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to register irq (%d)\n", ret); ++ goto err_disable_clk; ++ } ++ ++ ret = spi_bitbang_start(&mdata->bitbang); ++ if (ret) { ++ dev_err(&pdev->dev, "spi_bitbang_start failed (%d)\n", ret); ++err_disable_clk: ++ clk_disable_unprepare(mdata->clk); ++err: ++ spi_master_put(master); ++ } ++ ++ return ret; ++} ++ ++static int mtk_spi_remove(struct platform_device *pdev) ++{ ++ struct spi_master *master = platform_get_drvdata(pdev); ++ struct mtk_spi_ddata *mdata = spi_master_get_devdata(master); ++ ++ spi_bitbang_stop(&mdata->bitbang); ++ mtk_spi_reset(mdata); ++ clk_disable_unprepare(mdata->clk); ++ spi_master_put(master); ++ ++ return 0; ++} ++ ++struct platform_driver mtk_spi_driver = { ++ .driver = { ++ .name = "mtk-spi", ++ .of_match_table = mtk_spi_of_match, ++ }, ++ .probe = mtk_spi_probe, ++ .remove = mtk_spi_remove, ++}; ++ ++module_platform_driver(mtk_spi_driver); ++ ++MODULE_DESCRIPTION("MTK SPI Controller driver"); ++MODULE_AUTHOR("Leilk Liu <leilk.liu@mediatek.com>"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform: mtk_spi"); +-- +1.7.10.4 + |