1 files changed, 0 insertions, 41 deletions
diff --git a/target/linux/mediatek/patches/0048-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt6.patch b/target/linux/mediatek/patches/0048-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt6.patch
deleted file mode 100644
index 1525409..0000000
--- a/target/linux/mediatek/patches/0048-dt-bindings-mediatek-Modify-pinctrl-bindings-for-mt6.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 69b78182d6d7777153323abe3cff8e533ca01143 Mon Sep 17 00:00:00 2001
-From: Hongzhou Yang <hongzhou.yang@mediatek.com>
-Date: Mon, 18 May 2015 23:11:12 -0700
-Subject: [PATCH 48/76] dt-bindings: mediatek: Modify pinctrl bindings for
- mt6397.
-
-Since 6397 is no need to support interrupt controller,
-moving interrupt controller relate property to optional list.
-Also adding mt8173 and mt8127 to bindings.
-
-Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
----
- Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt |    9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
-@@ -3,9 +3,11 @@
- The Mediatek's Pin controller is used to control SoC pins.
- 
- Required properties:
--- compatible: value should be either of the following.
-+- compatible: value should be one of the following.
-     (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
--- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
-+    (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
-+    (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
-+    (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
- - pins-are-numbered: Specify the subnodes are using numbered pinmux to
-   specify pins.
- - gpio-controller : Marks the device node as a gpio controller.
-@@ -24,6 +26,9 @@ Required properties:
-             Only the following flags are supported:
-             0 - GPIO_ACTIVE_HIGH
-             1 - GPIO_ACTIVE_LOW
-+
-+Optional properties:
-+- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
- - reg: physicall address base for EINT registers
- - interrupt-controller: Marks the device node as an interrupt controller
- - #interrupt-cells: Should be two.