summaryrefslogtreecommitdiff
path: root/target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch')
-rw-r--r--target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch551
1 files changed, 551 insertions, 0 deletions
diff --git a/target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch b/target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch
new file mode 100644
index 0000000..4516561
--- /dev/null
+++ b/target/linux/mediatek/patches/0066-arm-mediatek-add-m7623-devicetree.patch
@@ -0,0 +1,551 @@
+From a6bf117b5fe3acd76bbc45cc87fd80f589136e59 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 27 Jun 2015 13:14:42 +0200
+Subject: [PATCH 66/76] arm: mediatek: add m7623 devicetree
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/mt7623-evb.dts | 162 ++++++++++++++++++
+ arch/arm/boot/dts/mt7623.dtsi | 348 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 511 insertions(+)
+ create mode 100644 arch/arm/boot/dts/mt7623-evb.dts
+ create mode 100644 arch/arm/boot/dts/mt7623.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 992736b..525392e 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -658,6 +658,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
+ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt6589-aquaris5.dtb \
+ mt6592-evb.dtb \
++ mt7623-evb.dtb \
+ mt8127-moose.dtb \
+ mt8135-evbp1.dtb
+ endif
+diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
+new file mode 100644
+index 0000000..759142f
+--- /dev/null
++++ b/arch/arm/boot/dts/mt7623-evb.dts
+@@ -0,0 +1,162 @@
++/*
++ * Copyright (c) 2014 MediaTek Inc.
++ * Author: Joe.C <yingjoe.chen@mediatek.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include "mt7623.dtsi"
++
++/ {
++ model = "MediaTek MT7623 Evaluation Board";
++ compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
++
++ chosen {
++ stdout-path = &uart2;
++ };
++
++ memory {
++ reg = <0 0x80000000 0 0x10000000>;
++ };
++
++ usb_p1_vbus: fixedregulator@0 {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++};
++
++
++&pio {
++ pinctrl_uart2_default: uart2@0 {
++ pins {
++ pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
++ <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
++ };
++ };
++
++ pinctrl_i2c0_default: i2c@0 {
++ pins {
++ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
++ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
++ };
++ };
++
++ pinctrl_pcie_default: pcie@0 {
++ pins {
++ pinmux = <MT7623_PIN_24_EINT2_FUNC_PCIE2_PERST_N>,
++ <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
++ <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>,
++ <MT7623_PIN_250_GPIO250_FUNC_PCIE0_CLKREQ_N>,
++ <MT7623_PIN_251_GPIO251_FUNC_PCIE0_WAKE_N>,
++ <MT7623_PIN_252_GPIO252_FUNC_PCIE1_CLKREQ_N>,
++ <MT7623_PIN_253_GPIO253_FUNC_PCIE1_WAKE_N>,
++ <MT7623_PIN_254_GPIO254_FUNC_PCIE2_CLKREQ_N>,
++ <MT7623_PIN_255_GPIO255_FUNC_PCIE2_WAKE_N>;
++ };
++ };
++
++ pinctrl_spi_default: spi@0 {
++ pins {
++ pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
++ <MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
++ <MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>,
++ <MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>;
++ bias-disable;
++ };
++ };
++};
++
++&thermal {
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_default>;
++};
++
++&i2c0 {
++ status = "okay";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c0_default>;
++};
++
++&spi {
++ status = "okay";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spi_default>;
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "mx25l12805d";
++ reg = <0 0 0 0>;
++ linux,modalias = "m25p80", "w25q128";
++ spi-max-frequency = <10000000>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x30000>;
++ read-only;
++ };
++
++ partition@30000 {
++ label = "u-boot-env";
++ reg = <0x30000 0x10000>;
++ read-only;
++ };
++
++ factory: partition@40000 {
++ label = "factory";
++ reg = <0x40000 0x10000>;
++ read-only;
++ };
++
++ partition@50000 {
++ label = "firmware";
++ reg = <0x50000 0xfb0000>;
++ };
++ };
++};
++
++&mmc0 {
++ status = "okay";
++
++// pinctrl-names = "default", "state_uhs";
++// pinctrl-0 = <&mmc0_pins_default>;
++// pinctrl-1 = <&mmc0_pins_uhs>;
++ bus-width = <8>;
++ max-frequency = <50000000>;
++ cap-mmc-highspeed;
++// vmmc-supply = <&mt6397_vemc_3v3_reg>;
++// vqmmc-supply = <&mt6397_vio18_reg>;
++ non-removable;
++};
++
++&u3phy {
++ reg-p1-vbus-supply = <&usb_p1_vbus>;
++};
++
++&pcie {
++ status = "okay";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pcie_default>;
++};
+diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
+new file mode 100644
+index 0000000..ba74ed9
+--- /dev/null
++++ b/arch/arm/boot/dts/mt7623.dtsi
+@@ -0,0 +1,348 @@
++/*
++ * Copyright (c) 2014 MediaTek Inc.
++ * Author: Joe.C <yingjoe.chen@mediatek.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <dt-bindings/clock/mt7623-clk.h>
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
++#include <dt-bindings/reset-controller/mt7623-resets.h>
++#include "skeleton64.dtsi"
++
++/ {
++ compatible = "mediatek,mt7623";
++ interrupt-parent = <&sysirq>;
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ enable-method = "mediatek,mt65xx-smp";
++ cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a7";
++ reg = <0x0>;
++ };
++ cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a7";
++ reg = <0x1>;
++ };
++ cpu@2 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a7";
++ reg = <0x2>;
++ };
++ cpu@3 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a7";
++ reg = <0x3>;
++ };
++
++ };
++
++ clk26m: oscillator@0 {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <26000000>;
++ clock-output-names = "clk26m";
++ };
++
++ clk32k: oscillator@1 {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <32000>;
++ clock-output-names = "clk32k";
++ };
++
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupt-parent = <&gic>;
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>;
++ clock-frequency = <13000000>;
++ arm,cpu-registers-not-fw-configured;
++ };
++
++ thermal-zones {
++ cpu_thermal: cpu_thermal {
++ polling-delay-passive = <1000>;
++ polling-delay = <5000>;
++
++ thermal-sensors = <&thermal 1>;
++ };
++ };
++
++ soc {
++ #address-cells = <2>;
++ #size-cells = <2>;
++ compatible = "simple-bus";
++ ranges;
++
++ topckgen: topckgen@10000000 {
++ compatible = "mediatek,mt7623-topckgen";
++ reg = <0 0x10000000 0 0x1000>;
++ #clock-cells = <1>;
++ };
++
++ infracfg: infracfg@10001000 {
++ compatible = "mediatek,mt7623-infracfg", "syscon";
++ reg = <0 0x10001000 0 0x1000>;
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ pericfg: pericfg@10003000 {
++ compatible = "mediatek,mt7623-pericfg", "syscon";
++ reg = <0 0x10003000 0 0x1000>;
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ /*
++ * Pinctrl access register at 0x10005000 through regmap.
++ * Register 0x1000b000 is used by EINT.
++ */
++ pio: pinctrl@10005000 {
++ compatible = "mediatek,mt7623-pinctrl";
++ reg = <0 0x1000b000 0 0x1000>;
++ mediatek,pctl-regmap = <&syscfg_pctl_a>;
++ pins-are-numbered;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
++ };
++
++ syscfg_pctl_a: syscfg_pctl_a@10005000 {
++ compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
++ reg = <0 0x10005000 0 0x1000>;
++ };
++
++ wdt: watchdog@10007000 {
++ compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt";
++ reg = <0 0x10007000 0 0x18>;
++ };
++
++ timer: timer@10008000 {
++ compatible = "mediatek,mt7623-timer",
++ "mediatek,mt6577-timer";
++ reg = <0 0x10008000 0 0x80>;
++ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&topckgen CLK_TOP_AXI_SEL>,
++ <&topckgen CLK_TOP_RTC_SEL>;
++ clock-names = "system-clk", "rtc-clk";
++ };
++
++ sysirq: interrupt-controller@10200100 {
++ compatible = "mediatek,mt7623-sysirq",
++ "mediatek,mt6577-sysirq";
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ interrupt-parent = <&gic>;
++ reg = <0 0x10200100 0 0x1c>;
++ };
++
++ apmixedsys: apmixedsys@10209000 {
++ compatible = "mediatek,mt7623-apmixedsys";
++ reg = <0 0x10209000 0 0x1000>;
++ #clock-cells = <1>;
++ };
++
++ gic: interrupt-controller@10211000 {
++ compatible = "arm,cortex-a7-gic";
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ interrupt-parent = <&gic>;
++ reg = <0 0x10211000 0 0x1000>,
++ <0 0x10212000 0 0x1000>,
++ <0 0x10214000 0 0x2000>,
++ <0 0x10216000 0 0x2000>;
++ };
++
++ auxadc: auxadc@11001000 {
++ compatible = "mediatek,mt7623-auxadc", "mediatek,mt8173-auxadc";
++ reg = <0 0x11001000 0 0x1000>;
++ };
++
++ uart0: serial@11006000 {
++ compatible = "mediatek,mt7623-uart","mediatek,mt6577-uart";
++ reg = <0 0x11002000 0 0x400>;
++ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
++ clock-names = "baud", "bus";
++
++ status = "disabled";
++ };
++
++ uart1: serial@11007000 {
++ compatible = "mediatek,mt7623-uart","mediatek,mt6577-uart";
++ reg = <0 0x11003000 0 0x400>;
++ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
++ clock-names = "baud", "bus";
++
++ status = "disabled";
++ };
++
++ uart2: serial@11008000 {
++ compatible = "mediatek,mt7623-uart","mediatek,mt6577-uart";
++ reg = <0 0x11004000 0 0x400>;
++ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
++ clock-names = "baud", "bus";
++
++ status = "disabled";
++ };
++
++ uart3: serial@11009000 {
++ compatible = "mediatek,mt7623-uart","mediatek,mt6577-uart";
++ reg = <0 0x11005000 0 0x400>;
++ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
++ clock-names = "baud", "bus";
++
++ status = "disabled";
++ };
++
++ spi: spi@1100a000 {
++ compatible = "medi/THEatek,mt7623-spi", "mediatek,mt6589-spi";
++ reg = <0 0x1100a000 0 0x1000>;
++ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_SPI0>;
++ clock-names = "main";
++
++ status = "disabled";
++ };
++
++ thermal: thermal@1100b000 {
++ #thermal-sensor-cells = <1>;
++ compatible = "mediatek,mt7623-thermal", "mediatek,mt8173-thermal";
++ reg = <0 0x1100b000 0 0x1000>;
++ interrupts = <0 38 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
++ clock-names = "therm", "auxadc";
++ resets = <&pericfg MT7623_PERI_THERM_SW_RST>;
++ reset-names = "therm";
++ auxadc = <&auxadc>;
++ apmixedsys = <&apmixedsys>;
++
++ status = "disabled";
++ };
++
++ i2c0: i2c@11007000 {
++ compatible = "mediatek,mt7623-i2c", "mediatek,mt6577-i2c";
++ reg = <0 0x11007000 0 0x70>,
++ <0 0x11000300 0 0x80>;
++ interrupts = <0 44 IRQ_TYPE_LEVEL_LOW>;
++ clock-frequency = <400000>;
++ clock-div = <16>;
++ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
++ clock-names = "main", "dma";
++
++ status = "disabled";
++ };
++
++ mmc0: mmc@11230000 {
++ compatible = "mediatek,mt7623-mmc",
++ "mediatek,mt8135-mmc";
++ reg = <0 0x11230000 0 0x1000>;
++ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
++ clocks = <&pericfg CLK_PERI_MSDC20_1>,
++ <&topckgen CLK_TOP_MSDC30_0_SEL>;
++ clock-names = "source", "hclk";
++ status = "disabled";
++ };
++
++ usb: usb30@11270000 {
++ compatible = "mediatek,mt7623-xhci", "mediatek,mt8173-xhci", "generic-xhci";
++ reg = <0 0x11270000 0 0x1000>;
++ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
++ usb-phy = <&u3phy>;
++ usb3-lpm-capable;
++ };
++
++ u3phy: usb-phy@11271000 {
++ compatible = "mediatek,mt7623-u3phy", "mediatek,mt8173-u3phy";
++ reg = <0 0x11271000 0 0x3000>,
++ <0 0x11280000 0 0x20000>;
++// power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
++// reg-vusb33-supply = <&mt6397_vusb_reg>;
++ clocks = <&pericfg CLK_PERI_USB0>,
++ <&pericfg CLK_PERI_USB1>,
++ <&topckgen CLK_TOP_USB20_SEL>;
++// <&apmixedsys CLK_APMIXED_REF2USB_TX>;
++ clock-names = "wakeup_deb_p0",
++ "wakeup_deb_p1",
++ "sys_mac";
++// "u3phya_ref";
++ disable-usb2-p1;
++ };
++ };
++
++ ethernet@1B100000 {
++ compatible = "mediatek,mt7623-net";
++ interrupts = <0 200 IRQ_TYPE_LEVEL_LOW>;
++ };
++
++ pcie: pcie@1a140000 {
++ compatible = "mediatek,mt7623-pcie";
++ reg = <0 0x1a140000 0 0x10000>;
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ device_type = "pci";
++
++ bus-range = <0 255>;
++ ranges = <
++ 0x02000000 0 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
++ 0x01000000 0 0 0x00000000 0x1A160000 0 0x00010000 /* io space */
++ >;
++
++ pcie0 {
++ reg = <0x0000 0 0 0 0>;
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ device_type = "pci";
++ };
++
++ pcie1 {
++ reg = <0x0800 0 0 0 0>;
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ device_type = "pci";
++ };
++
++ pcie2 {
++ reg = <0x1000 0 0 0 0>;
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ device_type = "pci";
++ };
++
++ status = "disabled";
++ };
++};
+--
+1.7.10.4
+