summaryrefslogtreecommitdiff
path: root/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch')
-rw-r--r--target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch301
1 files changed, 0 insertions, 301 deletions
diff --git a/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch b/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch
deleted file mode 100644
index be4d3ab..0000000
--- a/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From ae23894bcb163d1f91483b9566dc077f1e863af6 Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Tue, 23 Jul 2013 08:44:00 -0300
-Subject: [PATCH 064/203] ARM: kirkwood: Relocate PCIe device tree nodes
-
-Now that mbus has been added to the device tree, it's possible to
-move the PCIe nodes out of the ocp node, placing it directly
-below the mbus. This is a more accurate representation of the hardware.
-
-Moving the PCIe nodes, we now need to introduce an extra cell to
-encode the window target ID and attribute. Since this depends on
-the PCIe port, we split the ranges translation entries, to
-correspond to each MBus window.
-
-In addition, we encode the PCIe memory and I/O apertures in the MBus
-node, according to the MBus DT binding specification. The choice made
-is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for
-I/O space. These apertures can be changed in each per-board DT file.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Tested-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
----
- arch/arm/boot/dts/kirkwood-6281.dtsi | 35 ++++++++++++++
- arch/arm/boot/dts/kirkwood-6282.dtsi | 55 ++++++++++++++++++++++
- arch/arm/boot/dts/kirkwood-iconnect.dts | 11 +++++
- arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +++++
- .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++
- arch/arm/boot/dts/kirkwood-nsa310.dts | 19 ++++----
- arch/arm/boot/dts/kirkwood-ts219-6282.dts | 19 ++++----
- arch/arm/boot/dts/kirkwood-ts219.dtsi | 10 ++++
- arch/arm/boot/dts/kirkwood.dtsi | 4 ++
- 9 files changed, 159 insertions(+), 16 deletions(-)
-
---- a/arch/arm/boot/dts/kirkwood-6281.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
-@@ -1,4 +1,39 @@
- / {
-+ mbus {
-+ pcie-controller {
-+ compatible = "marvell,kirkwood-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &intc 9>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gate_clk 2>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
- compatible = "marvell,88f6281-pinctrl";
---- a/arch/arm/boot/dts/kirkwood-6282.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
-@@ -1,4 +1,59 @@
- / {
-+ mbus {
-+ pcie-controller {
-+ compatible = "marvell,kirkwood-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
-+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
-+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &intc 9>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gate_clk 2>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &intc 10>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gate_clk 18>;
-+ status = "disabled";
-+ };
-+ };
-+ };
- ocp@f1000000 {
-
- pinctrl: pinctrl@10000 {
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -18,6 +18,17 @@
- linux,initrd-end = <0x4800000>;
- };
-
-+ mbus {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
-
---- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
-+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
-@@ -16,6 +16,17 @@
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-
-+ mbus {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
-
---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-@@ -16,6 +16,17 @@
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-
-+ mbus {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
-
---- a/arch/arm/boot/dts/kirkwood-nsa310.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
-@@ -16,6 +16,17 @@
- bootargs = "console=ttyS0,115200";
- };
-
-+ mbus {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
- pinctrl-0 = <&pmx_unknown>;
-@@ -162,14 +173,6 @@
- reg = <0x5040000 0x2fc0000>;
- };
- };
--
-- pcie-controller {
-- status = "okay";
--
-- pcie@1,0 {
-- status = "okay";
-- };
-- };
- };
-
- gpio_keys {
---- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
-+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
-@@ -5,6 +5,17 @@
- #include "kirkwood-ts219.dtsi"
-
- / {
-+ mbus {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@2,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
-
-@@ -30,14 +41,6 @@
- marvell,function = "gpio";
- };
- };
-- pcie-controller {
-- status = "okay";
--
-- pcie@2,0 {
-- status = "okay";
-- };
-- };
--
- };
-
- gpio_keys {
---- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
-@@ -13,6 +13,16 @@
- bootargs = "console=ttyS0,115200n8";
- };
-
-+ mbus {
-+ pcie-controller {
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+ };
-+ };
-+
- ocp@f1000000 {
- i2c@11000 {
- status = "okay";
---- a/arch/arm/boot/dts/kirkwood.dtsi
-+++ b/arch/arm/boot/dts/kirkwood.dtsi
-@@ -20,7 +20,11 @@
-
- mbus {
- compatible = "marvell,kirkwood-mbus", "simple-bus";
-+ #address-cells = <2>;
-+ #size-cells = <1>;
- controller = <&mbusc>;
-+ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
-+ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- };
-
- ocp@f1000000 {
generated by cgit v1.1 at 2024-12-16 03:14:51 +0000