diff options
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch')
| -rw-r--r-- | target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch b/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch new file mode 100644 index 0000000..e31cd2f --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch @@ -0,0 +1,39 @@ +From d6af8f27223a244d74ab44842bdec707c97cfe55 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> +Date: Mon, 12 Aug 2013 14:14:48 -0300 +Subject: [PATCH 115/203] mtd: nand: pxa3xx: Handle ECC and DMA enable/disable + properly + +When ECC is not selected, the ECC enable bit must be cleared +in the NAND control register. Same applies to DMA. + +Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> +Tested-by: Daniel Mack <zonque@gmail.com> +Signed-off-by: Brian Norris <computersforpeace@gmail.com> +Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> +--- + drivers/mtd/nand/pxa3xx_nand.c | 13 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -314,8 +314,17 @@ static void pxa3xx_nand_start(struct pxa + uint32_t ndcr; + + ndcr = host->reg_ndcr; +- ndcr |= info->use_ecc ? NDCR_ECC_EN : 0; +- ndcr |= info->use_dma ? NDCR_DMA_EN : 0; ++ ++ if (info->use_ecc) ++ ndcr |= NDCR_ECC_EN; ++ else ++ ndcr &= ~NDCR_ECC_EN; ++ ++ if (info->use_dma) ++ ndcr |= NDCR_DMA_EN; ++ else ++ ndcr &= ~NDCR_DMA_EN; ++ + ndcr |= NDCR_ND_RUN; + + /* clear status bits and run */ |