summaryrefslogtreecommitdiff
path: root/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch')
-rw-r--r--target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch325
1 files changed, 325 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch b/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch
new file mode 100644
index 0000000..f8e3c87
--- /dev/null
+++ b/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch
@@ -0,0 +1,325 @@
+From cfd1799f9ec5c9820f371e1fcf2f3c458bd24ebb Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Thu, 14 Nov 2013 18:25:37 -0300
+Subject: [PATCH 151/203] mtd: nand: pxa3xx: Introduce multiple page I/O
+ support
+
+As preparation work to fully support large pages, this commit adds
+the initial infrastructure to support splitted (aka chunked) I/O
+operation. This commit adds support for read, and follow-up patches
+will add write support.
+
+When a read (aka READ0) command is issued, the driver loops issuing
+the same command until all the requested data is transfered, changing
+the 'extended' command field as needed.
+
+For instance, if the driver is required to read a 4 KiB page, using a
+chunk size of 2 KiB, the transaction is splitted in:
+1. Monolithic read, first 2 KiB page chunk is read
+2. Last naked read, second and last 2KiB page chunk is read
+
+If ECC is enabled it is calculated on each chunk transfered and added
+at a controller-fixed location after the data chunk that must be
+spare area.
+
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Tested-by: Daniel Mack <zonque@gmail.com>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+ drivers/mtd/nand/pxa3xx_nand.c | 182 ++++++++++++++++++++++++++++++++++++++---
+ 1 file changed, 172 insertions(+), 10 deletions(-)
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -103,6 +103,8 @@
+ #define NDCB0_ST_ROW_EN (0x1 << 26)
+ #define NDCB0_AUTO_RS (0x1 << 25)
+ #define NDCB0_CSEL (0x1 << 24)
++#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29)
++#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
+ #define NDCB0_CMD_TYPE_MASK (0x7 << 21)
+ #define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
+ #define NDCB0_NC (0x1 << 20)
+@@ -113,6 +115,14 @@
+ #define NDCB0_CMD1_MASK (0xff)
+ #define NDCB0_ADDR_CYC_SHIFT (16)
+
++#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
++#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
++#define EXT_CMD_TYPE_READ 4 /* Read */
++#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
++#define EXT_CMD_TYPE_FINAL 3 /* Final command */
++#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
++#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
++
+ /* macros for registers read/write */
+ #define nand_writel(info, off, val) \
+ __raw_writel((val), (info)->mmio_base + (off))
+@@ -206,8 +216,8 @@ struct pxa3xx_nand_info {
+ int use_spare; /* use spare ? */
+ int need_wait;
+
+- unsigned int fifo_size; /* max. data size in the FIFO */
+ unsigned int data_size; /* data to be read from FIFO */
++ unsigned int chunk_size; /* split commands chunk size */
+ unsigned int oob_size;
+ unsigned int spare_size;
+ unsigned int ecc_size;
+@@ -271,6 +281,31 @@ static struct nand_bbt_descr bbt_mirror_
+ .pattern = bbt_mirror_pattern
+ };
+
++static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
++ .eccbytes = 64,
++ .eccpos = {
++ 32, 33, 34, 35, 36, 37, 38, 39,
++ 40, 41, 42, 43, 44, 45, 46, 47,
++ 48, 49, 50, 51, 52, 53, 54, 55,
++ 56, 57, 58, 59, 60, 61, 62, 63,
++ 96, 97, 98, 99, 100, 101, 102, 103,
++ 104, 105, 106, 107, 108, 109, 110, 111,
++ 112, 113, 114, 115, 116, 117, 118, 119,
++ 120, 121, 122, 123, 124, 125, 126, 127},
++ /* Bootrom looks in bytes 0 & 5 for bad blocks */
++ .oobfree = { {6, 26}, { 64, 32} }
++};
++
++static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
++ .eccbytes = 128,
++ .eccpos = {
++ 32, 33, 34, 35, 36, 37, 38, 39,
++ 40, 41, 42, 43, 44, 45, 46, 47,
++ 48, 49, 50, 51, 52, 53, 54, 55,
++ 56, 57, 58, 59, 60, 61, 62, 63},
++ .oobfree = { }
++};
++
+ /* Define a default flash type setting serve as flash detecting only */
+ #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
+
+@@ -433,7 +468,7 @@ static void disable_int(struct pxa3xx_na
+
+ static void handle_data_pio(struct pxa3xx_nand_info *info)
+ {
+- unsigned int do_bytes = min(info->data_size, info->fifo_size);
++ unsigned int do_bytes = min(info->data_size, info->chunk_size);
+
+ switch (info->state) {
+ case STATE_PIO_WRITING:
+@@ -670,7 +705,7 @@ static void prepare_start_command(struct
+ }
+
+ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+- uint16_t column, int page_addr)
++ int ext_cmd_type, uint16_t column, int page_addr)
+ {
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+@@ -703,9 +738,20 @@ static int prepare_set_command(struct px
+ if (command == NAND_CMD_READOOB)
+ info->buf_start += mtd->writesize;
+
+- /* Second command setting for large pages */
+- if (mtd->writesize >= PAGE_CHUNK_SIZE)
++ /*
++ * Multiple page read needs an 'extended command type' field,
++ * which is either naked-read or last-read according to the
++ * state.
++ */
++ if (mtd->writesize == PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
++ } else if (mtd->writesize > PAGE_CHUNK_SIZE) {
++ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
++ | NDCB0_LEN_OVRD
++ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
++ info->ndcb3 = info->chunk_size +
++ info->oob_size;
++ }
+
+ set_command_address(info, mtd->writesize, column, page_addr);
+ break;
+@@ -821,7 +867,8 @@ static void pxa3xx_nand_cmdfunc(struct m
+ prepare_start_command(info, command);
+
+ info->state = STATE_PREPARED;
+- exec_cmd = prepare_set_command(info, command, column, page_addr);
++ exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
++
+ if (exec_cmd) {
+ init_completion(&info->cmd_complete);
+ init_completion(&info->dev_ready);
+@@ -839,6 +886,93 @@ static void pxa3xx_nand_cmdfunc(struct m
+ info->state = STATE_IDLE;
+ }
+
++static void armada370_nand_cmdfunc(struct mtd_info *mtd,
++ const unsigned command,
++ int column, int page_addr)
++{
++ struct pxa3xx_nand_host *host = mtd->priv;
++ struct pxa3xx_nand_info *info = host->info_data;
++ int ret, exec_cmd, ext_cmd_type;
++
++ /*
++ * if this is a x16 device then convert the input
++ * "byte" address into a "word" address appropriate
++ * for indexing a word-oriented device
++ */
++ if (info->reg_ndcr & NDCR_DWIDTH_M)
++ column /= 2;
++
++ /*
++ * There may be different NAND chip hooked to
++ * different chip select, so check whether
++ * chip select has been changed, if yes, reset the timing
++ */
++ if (info->cs != host->cs) {
++ info->cs = host->cs;
++ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
++ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
++ }
++
++ /* Select the extended command for the first command */
++ switch (command) {
++ case NAND_CMD_READ0:
++ case NAND_CMD_READOOB:
++ ext_cmd_type = EXT_CMD_TYPE_MONO;
++ break;
++ default:
++ ext_cmd_type = 0;
++ }
++
++ prepare_start_command(info, command);
++
++ /*
++ * Prepare the "is ready" completion before starting a command
++ * transaction sequence. If the command is not executed the
++ * completion will be completed, see below.
++ *
++ * We can do that inside the loop because the command variable
++ * is invariant and thus so is the exec_cmd.
++ */
++ info->need_wait = 1;
++ init_completion(&info->dev_ready);
++ do {
++ info->state = STATE_PREPARED;
++ exec_cmd = prepare_set_command(info, command, ext_cmd_type,
++ column, page_addr);
++ if (!exec_cmd) {
++ info->need_wait = 0;
++ complete(&info->dev_ready);
++ break;
++ }
++
++ init_completion(&info->cmd_complete);
++ pxa3xx_nand_start(info);
++
++ ret = wait_for_completion_timeout(&info->cmd_complete,
++ CHIP_DELAY_TIMEOUT);
++ if (!ret) {
++ dev_err(&info->pdev->dev, "Wait time out!!!\n");
++ /* Stop State Machine for next command cycle */
++ pxa3xx_nand_stop(info);
++ break;
++ }
++
++ /* Check if the sequence is complete */
++ if (info->data_size == 0)
++ break;
++
++ if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
++ /* Last read: issue a 'last naked read' */
++ if (info->data_size == info->chunk_size)
++ ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
++ else
++ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
++ }
++ } while (1);
++
++ info->state = STATE_IDLE;
++}
++
+ static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
+ {
+@@ -1019,13 +1153,14 @@ static int pxa3xx_nand_detect_config(str
+
+ if (ndcr & NDCR_PAGE_SZ) {
+ /* Controller's FIFO size */
+- info->fifo_size = 2048;
++ info->chunk_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+- info->fifo_size = 512;
++ info->chunk_size = 512;
+ host->read_id_bytes = 2;
+ }
+
++ /* Set an initial chunk size */
+ info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+@@ -1129,6 +1264,7 @@ static int pxa_ecc_init(struct pxa3xx_na
+ * is used with non-ONFI compliant devices.
+ */
+ if (page_size == 2048) {
++ info->chunk_size = 2048;
+ info->spare_size = 40;
+ info->ecc_size = 24;
+ ecc->mode = NAND_ECC_HW;
+@@ -1137,6 +1273,7 @@ static int pxa_ecc_init(struct pxa3xx_na
+ return 1;
+
+ } else if (page_size == 512) {
++ info->chunk_size = 512;
+ info->spare_size = 8;
+ info->ecc_size = 8;
+ ecc->mode = NAND_ECC_HW;
+@@ -1151,7 +1288,28 @@ static int armada370_ecc_init(struct pxa
+ struct nand_ecc_ctrl *ecc,
+ int strength, int page_size)
+ {
+- /* Unimplemented yet */
++ if (strength == 4 && page_size == 4096) {
++ info->ecc_bch = 1;
++ info->chunk_size = 2048;
++ info->spare_size = 32;
++ info->ecc_size = 32;
++ ecc->mode = NAND_ECC_HW;
++ ecc->size = info->chunk_size;
++ ecc->layout = &ecc_layout_4KB_bch4bit;
++ ecc->strength = 16;
++ return 1;
++
++ } else if (strength == 8 && page_size == 4096) {
++ info->ecc_bch = 1;
++ info->chunk_size = 1024;
++ info->spare_size = 0;
++ info->ecc_size = 32;
++ ecc->mode = NAND_ECC_HW;
++ ecc->size = info->chunk_size;
++ ecc->layout = &ecc_layout_4KB_bch8bit;
++ ecc->strength = 16;
++ return 1;
++ }
+ return 0;
+ }
+
+@@ -1319,12 +1477,16 @@ static int alloc_nand_resource(struct pl
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+- chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
++
++ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
++ chip->cmdfunc = armada370_nand_cmdfunc;
++ else
++ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ }
+
+ spin_lock_init(&chip->controller->lock);
generated by cgit v1.1 at 2024-07-08 23:57:05 +0000