diff options
Diffstat (limited to 'target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch')
| -rw-r--r-- | target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch b/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch deleted file mode 100644 index cc9311b..0000000 --- a/target/linux/mvebu/patches-3.18/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch +++ /dev/null @@ -1,212 +0,0 @@ -From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Thu, 8 Jan 2015 18:38:09 +0100 -Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board - support - -The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB -SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage. - -[gregory.clement@free-electrons.com: switch the license to the dual -X11/GPL with the agreement of the author] - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++ - 2 files changed, 179 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -500,6 +500,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - armada-375-db.dtb - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ -+ armada-385-db-ap.dtb \ - armada-385-rd.dtb - dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-axpwifiap.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -0,0 +1,178 @@ -+/* -+ * Device Tree file for Marvell Armada 385 Access Point Development board -+ * (DB-88F6820-AP) -+ * -+ * Copyright (C) 2014 Marvell -+ * -+ * Nadav Haklai <nadavh@marvell.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "armada-385.dtsi" -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ model = "Marvell Armada 385 Access Point Development Board"; -+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart1; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x80000000>; /* 2GB */ -+ }; -+ -+ soc { -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 -+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; -+ -+ internal-regs { -+ spi1: spi@10680 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins>; -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "st,m25p128"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <54000000>; -+ }; -+ }; -+ -+ i2c0: i2c@11000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ status = "okay"; -+ -+ /* -+ * This bus is wired to two EEPROM -+ * sockets, one of which holding the -+ * board ID used by the bootloader. -+ * Erasing this EEPROM's content will -+ * brick the board. -+ * Use this bus with caution. -+ */ -+ }; -+ -+ mdio@72004 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mdio_pins>; -+ -+ phy0: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ phy1: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ -+ phy2: ethernet-phy@6 { -+ reg = <6>; -+ }; -+ }; -+ -+ /* UART0 is exposed through the JP8 connector */ -+ uart0: serial@12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ -+ /* -+ * UART1 is exposed through a FTDI chip -+ * wired to the mini-USB connector -+ */ -+ uart1: serial@12100 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+ }; -+ -+ ethernet@30000 { -+ status = "okay"; -+ phy = <&phy2>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@34000 { -+ status = "okay"; -+ phy = <&phy1>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-names = "default"; -+ -+ /* -+ * The Reference Clock 0 is used to -+ * provide a clock to the PHY -+ */ -+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; -+ status = "okay"; -+ phy = <&phy0>; -+ phy-mode = "rgmii-id"; -+ }; -+ }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* -+ * The three PCIe units are accessible through -+ * standard mini-PCIe slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@3,0 { -+ /* Port 2, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ }; -+}; |