diff options
Diffstat (limited to 'target/linux/octeon/patches-2.6.34')
3 files changed, 138 insertions, 0 deletions
diff --git a/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch b/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch new file mode 100644 index 0000000..63f407d --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch @@ -0,0 +1,77 @@ +--- a/drivers/staging/octeon/cvmx-helper-board.c ++++ b/drivers/staging/octeon/cvmx-helper-board.c +@@ -90,7 +90,7 @@ int cvmx_helper_board_get_mii_address(in + case CVMX_BOARD_TYPE_KODAMA: + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_HIKARI: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* +@@ -103,6 +103,12 @@ int cvmx_helper_board_get_mii_address(in + return 9; + else + return -1; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ ++ /* We have only one port, using GMII */ ++ if (ipd_port == 0) ++ return 9; ++ else ++ return -1; + case CVMX_BOARD_TYPE_NAC38: + /* Board has 8 RGMII ports PHYs are 0-7 */ + if ((ipd_port >= 0) && (ipd_port < 4)) +@@ -213,7 +219,7 @@ cvmx_helper_link_info_t __cvmx_helper_bo + result.s.speed = 1000; + return result; + case CVMX_BOARD_TYPE_EBH3100: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* Port 1 on these boards is always Gigabit */ +@@ -225,6 +231,9 @@ cvmx_helper_link_info_t __cvmx_helper_bo + } + /* Fall through to the generic code below */ + break; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ ++ is_broadcom_phy = 1; ++ break; + case CVMX_BOARD_TYPE_CUST_NB5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { +--- a/drivers/staging/octeon/cvmx-helper-rgmii.c ++++ b/drivers/staging/octeon/cvmx-helper-rgmii.c +@@ -66,13 +66,15 @@ int __cvmx_helper_rgmii_probe(int interf + cvmx_dprintf("ERROR: RGMII initialize called in " + "SPI interface\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) +- || OCTEON_IS_MODEL(OCTEON_CN30XX) ++ //|| OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * On these chips "type" says we're in + * GMII/MII mode. This limits us to 2 ports + */ + num_ports = 2; ++ } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { ++ num_ports = 1; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); +--- a/arch/mips/pci/pci-octeon.c ++++ b/arch/mips/pci/pci-octeon.c +@@ -210,9 +210,11 @@ const char *octeon_get_pci_interrupts(vo + /* This is really the NAC38 */ + return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_EBH3100: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ return "AAAAAAAAAAAAAABAAAAAAAAAAAAAAABA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; + case CVMX_BOARD_TYPE_THUNDER: diff --git a/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch b/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch new file mode 100644 index 0000000..1d3641a --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/pci/pci-octeon.c ++++ b/arch/mips/pci/pci-octeon.c +@@ -217,6 +217,8 @@ const char *octeon_get_pci_interrupts(vo + return "AAAAAAAAAAAAAABAAAAAAAAAAAAAAABA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; ++ case CVMX_BOARD_TYPE_CUST_NB5: ++ return "ABDABAAAAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_EBH3000: + default: +--- a/drivers/staging/octeon/cvmx-helper-board.c ++++ b/drivers/staging/octeon/cvmx-helper-board.c +@@ -707,6 +707,7 @@ cvmx_helper_board_usb_clock_types_t __cv + { + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_BBGW_REF: ++ case CVMX_BOARD_TYPE_CUST_NB5: + return USB_CLOCK_TYPE_CRYSTAL_12; + } + return USB_CLOCK_TYPE_REF_48; diff --git a/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch b/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch new file mode 100644 index 0000000..2920de2 --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch @@ -0,0 +1,40 @@ +When building with a toolchain that is configured to produce 32-bits executable +by default, we will produce __lshrti3 in sched_clock() which is never resolved +so the kernel fails to link. Unconditionally use the inline assemble version +as suggested by David Daney, which works around the issue. + +CC: David Daney <ddaney@caviumnetworks.com> +Signed-off-by: Florian Fainelli <florian@openwrt.org> +--- + arch/mips/cavium-octeon/csrc-octeon.c | 8 -------- + 1 files changed, 0 insertions(+), 8 deletions(-) + +diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c +index 0bf4bbe..36400d2 100644 +--- a/arch/mips/cavium-octeon/csrc-octeon.c ++++ b/arch/mips/cavium-octeon/csrc-octeon.c +@@ -53,7 +53,6 @@ static struct clocksource clocksource_mips = { + unsigned long long notrace sched_clock(void) + { + /* 64-bit arithmatic can overflow, so use 128-bit. */ +-#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3)) + u64 t1, t2, t3; + unsigned long long rv; + u64 mult = clocksource_mips.mult; +@@ -73,13 +72,6 @@ unsigned long long notrace sched_clock(void) + : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift) + : "hi", "lo"); + return rv; +-#else +- /* GCC > 4.3 do it the easy way. */ +- unsigned int __attribute__((mode(TI))) t; +- t = read_c0_cvmcount(); +- t = t * clocksource_mips.mult; +- return (unsigned long long)(t >> clocksource_mips.shift); +-#endif + } + + void __init plat_time_init(void) +-- +1.7.1 + |