summaryrefslogtreecommitdiff
path: root/target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch')
-rw-r--r--target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch102
1 files changed, 102 insertions, 0 deletions
diff --git a/target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch b/target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch
new file mode 100644
index 0000000..beee4c8
--- /dev/null
+++ b/target/linux/omap/patches-3.12/908-Documentation-dt-bindings-TI-WiLink-modules.patch
@@ -0,0 +1,102 @@
+From patchwork Tue Jul 30 20:21:08 2013
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v3] Documentation: dt: bindings: TI WiLink modules
+From: Luciano Coelho <coelho@ti.com>
+X-Patchwork-Id: 2835914
+Message-Id: <1375215668-29171-1-git-send-email-coelho@ti.com>
+To: <devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>
+Cc: <mturquette@linaro.org>, <mark.rutland@arm.com>, <balbi@ti.com>,
+ <grant.likely@linaro.org>, <rob.herring@calxeda.com>,
+ <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
+ <linux-wireless@vger.kernel.org>,
+ <linux-arm-kernel@lists.infradead.org>, <tony@atomide.com>,
+ <nm@ti.com>, <laurent.pinchart@ideasonboard.com>
+Date: Tue, 30 Jul 2013 23:21:08 +0300
+
+Add device tree bindings documentation for the TI WiLink modules.
+Currently only the WLAN part of the WiLink6, WiLink7 and WiLink8
+modules is supported.
+
+Signed-off-by: Luciano Coelho <coelho@ti.com>
+Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+---
+In v3, use IRQ_TYPE_LEVEL_HIGH in the example, as suggested by Laurent.
+
+ .../devicetree/bindings/net/wireless/ti-wilink.txt | 68 ++++++++++++++++++++++
+ 1 file changed, 68 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/wireless/ti-wilink.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/wireless/ti-wilink.txt
+@@ -0,0 +1,68 @@
++TI WiLink Wireless Modules Device Tree Bindings
++===============================================
++
++The WiLink modules provide wireless connectivity, such as WLAN,
++Bluetooth, FM and NFC.
++
++There are several different modules available, which can be grouped by
++their generation: WiLink6, WiLink7 and WiLink8. WiLink4 is not
++currently supported with device tree.
++
++Currently, only the WLAN portion of the modules is supported with
++device tree.
++
++Required properties:
++--------------------
++
++- compatible: should be "ti,wilink6", "ti,wilink7" or "ti,wilink8"
++- interrupt-parent: the interrupt controller
++- interrupts: out-of-band WLAN interrupt
++ See the interrupt controller's bindings documentation for
++ detailed definition.
++
++Optional properties:
++--------------------
++
++- clocks: list of clocks needed by the chip as follows:
++
++ refclock: the internal WLAN reference clock frequency (required for
++ WiLink6 and WiLink7; not used for WiLink8).
++
++ tcxoclock: the internal WLAN TCXO clock frequency (required for
++ WiLink7 not used for WiLink6 and WiLink8).
++
++ The clocks must be defined and named accordingly. For example:
++
++ clocks = <&refclock>
++ clock-names = "refclock";
++
++ refclock: refclock {
++ compatible = "ti,wilink-clock";
++ #clock-cells = <0>;
++ clock-frequency = <38400000>;
++ };
++
++ Some modules that contain the WiLink chip provide clocks in the
++ module itself. In this case, we define a "ti,wilink-clock" as shown
++ above. But any other clock could in theory be used, so the proper
++ clock definition should be used.
++
++
++Example:
++--------
++
++Example definition that can be used in OMAP4 Panda:
++
++wlan {
++ compatible = "ti,wilink6";
++ interrupt-parent = <&gpio2>;
++ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio line 53 */
++ clocks = <&refclock>;
++ clock-names = "refclock";
++
++ refclock: refclock {
++ compatible = "ti,wilink-clock";
++ #clock-cells = <0>;
++ clock-frequency = <38400000>;
++ };
++};