diff options
Diffstat (limited to 'target/linux/omap35xx')
| -rw-r--r-- | target/linux/omap35xx/Makefile | 26 | ||||
| -rwxr-xr-x | target/linux/omap35xx/base-files/etc/config/network | 14 | ||||
| -rw-r--r-- | target/linux/omap35xx/base-files/etc/inittab | 7 | ||||
| -rw-r--r-- | target/linux/omap35xx/config-2.6.32 | 2106 | ||||
| -rw-r--r-- | target/linux/omap35xx/files/boot-mmc.cmd | 10 | ||||
| -rw-r--r-- | target/linux/omap35xx/generic/profiles/beagleboard.mk | 16 | ||||
| -rw-r--r-- | target/linux/omap35xx/generic/target.mk | 6 | ||||
| -rwxr-xr-x | target/linux/omap35xx/image/Makefile | 36 | ||||
| -rwxr-xr-x | target/linux/omap35xx/image/gen_image.sh | 35 | ||||
| -rw-r--r-- | target/linux/omap35xx/patches-2.6.32/001-DSS2.patch | 22831 | ||||
| -rw-r--r-- | target/linux/omap35xx/patches-2.6.32/002-OMAP.patch | 9839 | ||||
| -rw-r--r-- | target/linux/omap35xx/patches-2.6.32/003-enable_dss2_beagleboard.patch | 195 | ||||
| -rw-r--r-- | target/linux/omap35xx/patches-2.6.32/004-compile_fix_dispc.patch | 13 |
13 files changed, 35134 insertions, 0 deletions
diff --git a/target/linux/omap35xx/Makefile b/target/linux/omap35xx/Makefile new file mode 100644 index 0000000..2487887 --- /dev/null +++ b/target/linux/omap35xx/Makefile @@ -0,0 +1,26 @@ +# +# Copyright (C) 2006-2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=omap35xx +BOARDNAME:=TI OMAP35xx +FEATURES:=broken +SUBTARGETS=generic + +LINUX_VERSION:=2.6.32-rc5 +KERNELNAME:="uImage" + +DEVICE_TYPE=developerboard + +define Target/Description + omap35xx arm +endef + +include $(INCLUDE_DIR)/target.mk + +$(eval $(call BuildTarget)) diff --git a/target/linux/omap35xx/base-files/etc/config/network b/target/linux/omap35xx/base-files/etc/config/network new file mode 100755 index 0000000..2ea5a4b --- /dev/null +++ b/target/linux/omap35xx/base-files/etc/config/network @@ -0,0 +1,14 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname usb0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/omap35xx/base-files/etc/inittab b/target/linux/omap35xx/base-files/etc/inittab new file mode 100644 index 0000000..89626ec --- /dev/null +++ b/target/linux/omap35xx/base-files/etc/inittab @@ -0,0 +1,7 @@ +::sysinit:/etc/init.d/rcS S boot +::shutdown:/etc/init.d/rcS K stop +tts/0::askfirst:/bin/ash --login +ttyS0::askfirst:/bin/ash --login +ttyS1::askfirst:/bin/ash --login +ttyS2::askfirst:/bin/ash --login +tty1::askfirst:/bin/ash --login diff --git a/target/linux/omap35xx/config-2.6.32 b/target/linux/omap35xx/config-2.6.32 new file mode 100644 index 0000000..5b79b42 --- /dev/null +++ b/target/linux/omap35xx/config-2.6.32 @@ -0,0 +1,2106 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Thu Dec 10 00:13:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +CONFIG_RD_LZMA=y +# CONFIG_RD_LZO is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_LIB80211_CRYPT_WEP is not set +# CONFIG_LIB80211_CRYPT_CCMP is not set +# CONFIG_LIB80211_CRYPT_TKIP is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +CONFIG_DEBUG_DRIVER=y +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=2 +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_ROOTFS_ROOT_DEV=y +CONFIG_MTD_ROOTFS_SPLIT=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_AR7_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_GPIO=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_GPIO_DEVICE is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_GPIO_OLD is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC_INPUT_EVDEV is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=12 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set +CONFIG_OMAP2_DSS_FAKE_VSYNC=y +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE=y +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y +CONFIG_PANEL_SHARP_LS037V7DW01=y +CONFIG_PANEL_TAAL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_HWDEP is not set +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_ALL_CODECS=y +CONFIG_SND_SOC_WM_HUBS=y +CONFIG_SND_SOC_AD1836=y +CONFIG_SND_SOC_AD1938=y +CONFIG_SND_SOC_AD73311=y +CONFIG_SND_SOC_AK4104=y +CONFIG_SND_SOC_AK4535=y +CONFIG_SND_SOC_AK4642=y +CONFIG_SND_SOC_CS4270=y +CONFIG_SND_SOC_L3=y +CONFIG_SND_SOC_PCM3008=y +CONFIG_SND_SOC_SPDIF=y +CONFIG_SND_SOC_SSM2602=y +CONFIG_SND_SOC_TLV320AIC23=y +CONFIG_SND_SOC_TLV320AIC26=y +CONFIG_SND_SOC_TLV320AIC3X=y +CONFIG_SND_SOC_TWL4030=y +CONFIG_SND_SOC_UDA134X=y +CONFIG_SND_SOC_UDA1380=y +CONFIG_SND_SOC_WM8510=y +CONFIG_SND_SOC_WM8523=y +CONFIG_SND_SOC_WM8580=y +CONFIG_SND_SOC_WM8728=y +CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM8750=y +CONFIG_SND_SOC_WM8753=y +CONFIG_SND_SOC_WM8776=y +CONFIG_SND_SOC_WM8900=y +CONFIG_SND_SOC_WM8903=y +CONFIG_SND_SOC_WM8940=y +CONFIG_SND_SOC_WM8960=y +CONFIG_SND_SOC_WM8961=y +CONFIG_SND_SOC_WM8971=y +CONFIG_SND_SOC_WM8974=y +CONFIG_SND_SOC_WM8988=y +CONFIG_SND_SOC_WM8990=y +CONFIG_SND_SOC_WM8993=y +CONFIG_SND_SOC_WM9081=y +CONFIG_SND_SOC_MAX9877=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_ALAUDA=y +# CONFIG_USB_STORAGE_ONETOUCH is not set +CONFIG_USB_STORAGE_KARMA=y +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +CONFIG_USB_G_SERIAL=y +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_RTC7301 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +# CONFIG_ANDROID is not set + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_YAFFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_UNION_MOUNT is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZMA=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +CONFIG_MINI_FO=y +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_EXPORTFS=m + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +# CONFIG_CRYPTO_RNG is not set +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=y +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set + +# +# OCF Configuration +# +# CONFIG_OCF_OCF is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZMA_NEEDED=y +CONFIG_TEXTSEARCH=y +# CONFIG_TEXTSEARCH_KMP is not set +# CONFIG_TEXTSEARCH_BM is not set +# CONFIG_TEXTSEARCH_FSM is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/target/linux/omap35xx/files/boot-mmc.cmd b/target/linux/omap35xx/files/boot-mmc.cmd new file mode 100644 index 0000000..5e3b348 --- /dev/null +++ b/target/linux/omap35xx/files/boot-mmc.cmd @@ -0,0 +1,10 @@ +echo ----------------------------- +echo u-boot.cmd +echo Kernel: MMC0P1:uImage +echo RootFS: MMC0P2 +echo VideoMode: 640x480@60 +echo VideoSpec: omapfb:vram:2M,vram:4M +echo ----------------------------- +setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootwait nohz=off video=omapfb:vram:1M,vxres:640,vyres:480' +fatload mmc 0 83000000 uImage +bootm 83000000 diff --git a/target/linux/omap35xx/generic/profiles/beagleboard.mk b/target/linux/omap35xx/generic/profiles/beagleboard.mk new file mode 100644 index 0000000..69ecdbb --- /dev/null +++ b/target/linux/omap35xx/generic/profiles/beagleboard.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2006 - 2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Beagleboard + NAME:=beagleboard + FEATURES:=ext2 usb +endef + +define Profile/Beagleboard/Description + Beagleboard - www.beagleboard.org +endef +$(eval $(call Profile,Beagleboard)) diff --git a/target/linux/omap35xx/generic/target.mk b/target/linux/omap35xx/generic/target.mk new file mode 100644 index 0000000..30d8f23 --- /dev/null +++ b/target/linux/omap35xx/generic/target.mk @@ -0,0 +1,6 @@ +BOARDNAME:=Generic + +define Target/Description + Build firmware images for ti omap35xx based boards +endef + diff --git a/target/linux/omap35xx/image/Makefile b/target/linux/omap35xx/image/Makefile new file mode 100755 index 0000000..14b3417 --- /dev/null +++ b/target/linux/omap35xx/image/Makefile @@ -0,0 +1,36 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +JFFS2_BLOCKSIZE=128k +JFFS2OPTS += --little-endian --pagesize=0x800 --no-cleanmarkers --pad +MAKE += -j5 + +define Image/BuildKernel + $(TARGET_CROSS)objcopy -O binary -R .note -R .comment -S $(LINUX_DIR)/arch/arm/boot/compressed/vmlinux linux.bin + mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n "OpenWRT Kernel Image beagleboard" -d linux.bin uImage + mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n 'uImage.bin+mmc2' -d ../files/boot-mmc.cmd boot.scr + + mv uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage + mv boot.scr $(BIN_DIR)/boot.scr + rm linux.bin +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-root.$(1)) +endef + +define Image/Build + $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-root.$(1) + PADDING="true" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image 4 $(KDIR)/root.bootscript 240 $(KDIR)/root.$(1) + $(call Image/Build/$(1),$(1)) +endef + + +$(eval $(call BuildImage)) diff --git a/target/linux/omap35xx/image/gen_image.sh b/target/linux/omap35xx/image/gen_image.sh new file mode 100755 index 0000000..4fd6e37 --- /dev/null +++ b/target/linux/omap35xx/image/gen_image.sh @@ -0,0 +1,35 @@ +#!/usr/bin/env bash +# Copyright (C) 2006 - 2007 OpenWrt.org +set -x +[ $# == 5 ] || { + echo "SYNTAX: $0 <file> <kernel size> <kernel directory> <rootfs size> <rootfs image>" + exit 1 +} + +OUTPUT="$1" +KERNELSIZE="$2" +KERNELDIR="$3" +ROOTFSSIZE="$4" +ROOTFSIMAGE="$5" + +rm -f "$OUTPUT" + +head=16 +sect=63 +cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512))) + +# create partition table +set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m` + +KERNELOFFSET="$(($1 / 512))" +KERNELSIZE="$(($2 / 512))" +ROOTFSOFFSET="$(($3 / 512))" +ROOTFSSIZE="$(($4 / 512))" + +BLOCKS="$((($KERNELSIZE / 2) - 1))" + +genext2fs -d "$KERNELDIR" -b "$BLOCKS" "$OUTPUT.kernel" +dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc +[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE" +dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc +#rm -f "$OUTPUT.kernel" diff --git a/target/linux/omap35xx/patches-2.6.32/001-DSS2.patch b/target/linux/omap35xx/patches-2.6.32/001-DSS2.patch new file mode 100644 index 0000000..ca760bc --- /dev/null +++ b/target/linux/omap35xx/patches-2.6.32/001-DSS2.patch @@ -0,0 +1,22831 @@ +diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS +new file mode 100644 +index 0000000..0af0e9e +--- /dev/null ++++ b/Documentation/arm/OMAP/DSS +@@ -0,0 +1,317 @@ ++OMAP2/3 Display Subsystem ++------------------------- ++ ++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap ++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, ++TV-out and multiple display support, but there are lots of small improvements ++also. ++ ++The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB, ++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live ++currently side by side, you can choose which one to use. ++ ++Features ++-------- ++ ++Working and tested features include: ++ ++- MIPI DPI (parallel) output ++- MIPI DSI output in command mode ++- MIPI DBI (RFBI) output ++- SDI output ++- TV output ++- All pieces can be compiled as a module or inside kernel ++- Use DISPC to update any of the outputs ++- Use CPU to update RFBI or DSI output ++- OMAP DISPC planes ++- RGB16, RGB24 packed, RGB24 unpacked ++- YUV2, UYVY ++- Scaling ++- Adjusting DSS FCK to find a good pixel clock ++- Use DSI DPLL to create DSS FCK ++ ++Tested boards include: ++- OMAP3 SDP board ++- Beagle board ++- N810 ++ ++omapdss driver ++-------------- ++ ++The DSS driver does not itself have any support for Linux framebuffer, V4L or ++such like the current ones, but it has an internal kernel API that upper level ++drivers can use. ++ ++The DSS driver models OMAP's overlays, overlay managers and displays in a ++flexible way to enable non-common multi-display configuration. In addition to ++modelling the hardware overlays, omapdss supports virtual overlays and overlay ++managers. These can be used when updating a display with CPU or system DMA. ++ ++Panel and controller drivers ++---------------------------- ++ ++The drivers implement panel or controller specific functionality and are not ++usually visible to users except through omapfb driver. They register ++themselves to the DSS driver. ++ ++omapfb driver ++------------- ++ ++The omapfb driver implements arbitrary number of standard linux framebuffers. ++These framebuffers can be routed flexibly to any overlays, thus allowing very ++dynamic display architecture. ++ ++The driver exports some omapfb specific ioctls, which are compatible with the ++ioctls in the old driver. ++ ++The rest of the non standard features are exported via sysfs. Whether the final ++implementation will use sysfs, or ioctls, is still open. ++ ++V4L2 drivers ++------------ ++ ++V4L2 is being implemented in TI. ++ ++From omapdss point of view the V4L2 drivers should be similar to framebuffer ++driver. ++ ++Architecture ++-------------------- ++ ++Some clarification what the different components do: ++ ++ - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the ++ pixel data for the image. Framebuffer has width and height and color ++ depth. ++ - Overlay defines where the pixels are read from and where they go on the ++ screen. The overlay may be smaller than framebuffer, thus displaying only ++ part of the framebuffer. The position of the overlay may be changed if ++ the overlay is smaller than the display. ++ - Overlay manager combines the overlays in to one image and feeds them to ++ display. ++ - Display is the actual physical display device. ++ ++A framebuffer can be connected to multiple overlays to show the same pixel data ++on all of the overlays. Note that in this case the overlay input sizes must be ++the same, but, in case of video overlays, the output size can be different. Any ++framebuffer can be connected to any overlay. ++ ++An overlay can be connected to one overlay manager. Also DISPC overlays can be ++connected only to DISPC overlay managers, and virtual overlays can be only ++connected to virtual overlays. ++ ++An overlay manager can be connected to one display. There are certain ++restrictions which kinds of displays an overlay manager can be connected: ++ ++ - DISPC TV overlay manager can be only connected to TV display. ++ - Virtual overlay managers can only be connected to DBI or DSI displays. ++ - DISPC LCD overlay manager can be connected to all displays, except TV ++ display. ++ ++Sysfs ++----- ++The sysfs interface is mainly used for testing. I don't think sysfs ++interface is the best for this in the final version, but I don't quite know ++what would be the best interfaces for these things. ++ ++The sysfs interface is divided to two parts: DSS and FB. ++ ++/sys/class/graphics/fb? directory: ++mirror 0=off, 1=on ++rotate Rotation 0-3 for 0, 90, 180, 270 degrees ++rotate_type 0 = DMA rotation, 1 = VRFB rotation ++overlays List of overlay numbers to which framebuffer pixels go ++phys_addr Physical address of the framebuffer ++virt_addr Virtual address of the framebuffer ++size Size of the framebuffer ++ ++/sys/devices/platform/omapdss/overlay? directory: ++enabled 0=off, 1=on ++input_size width,height (ie. the framebuffer size) ++manager Destination overlay manager name ++name ++output_size width,height ++position x,y ++screen_width width ++global_alpha global alpha 0-255 0=transparent 255=opaque ++ ++/sys/devices/platform/omapdss/manager? directory: ++display Destination display ++name ++alpha_blending_enabled 0=off, 1=on ++trans_key_enabled 0=off, 1=on ++trans_key_type gfx-destination, video-source ++trans_key_value transparency color key (RGB24) ++default_color default background color (RGB24) ++ ++/sys/devices/platform/omapdss/display? directory: ++ctrl_name Controller name ++mirror 0=off, 1=on ++update_mode 0=off, 1=auto, 2=manual ++enabled 0=off, 1=on ++name ++rotate Rotation 0-3 for 0, 90, 180, 270 degrees ++timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) ++ When writing, two special timings are accepted for tv-out: ++ "pal" and "ntsc" ++panel_name ++tear_elim Tearing elimination 0=off, 1=on ++ ++There are also some debugfs files at <debugfs>/omapdss/ which show information ++about clocks and registers. ++ ++Examples ++-------- ++ ++The following definitions have been made for the examples below: ++ ++ovl0=/sys/devices/platform/omapdss/overlay0 ++ovl1=/sys/devices/platform/omapdss/overlay1 ++ovl2=/sys/devices/platform/omapdss/overlay2 ++ ++mgr0=/sys/devices/platform/omapdss/manager0 ++mgr1=/sys/devices/platform/omapdss/manager1 ++ ++lcd=/sys/devices/platform/omapdss/display0 ++dvi=/sys/devices/platform/omapdss/display1 ++tv=/sys/devices/platform/omapdss/display2 ++ ++fb0=/sys/class/graphics/fb0 ++fb1=/sys/class/graphics/fb1 ++fb2=/sys/class/graphics/fb2 ++ ++Default setup on OMAP3 SDP ++-------------------------- ++ ++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI ++and TV-out are not in use. The columns from left to right are: ++framebuffers, overlays, overlay managers, displays. Framebuffers are ++handled by omapfb, and the rest by the DSS. ++ ++FB0 --- GFX -\ DVI ++FB1 --- VID1 --+- LCD ---- LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Example: Switch from LCD to DVI ++---------------------- ++ ++w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1` ++h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1` ++ ++echo "0" > $lcd/enabled ++echo "" > $mgr0/display ++fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h ++# at this point you have to switch the dvi/lcd dip-switch from the omap board ++echo "dvi" > $mgr0/display ++echo "1" > $dvi/enabled ++ ++After this the configuration looks like: ++ ++FB0 --- GFX -\ -- DVI ++FB1 --- VID1 --+- LCD -/ LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Example: Clone GFX overlay to LCD and TV ++------------------------------- ++ ++w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1` ++h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1` ++ ++echo "0" > $ovl0/enabled ++echo "0" > $ovl1/enabled ++ ++echo "" > $fb1/overlays ++echo "0,1" > $fb0/overlays ++ ++echo "$w,$h" > $ovl1/output_size ++echo "tv" > $ovl1/manager ++ ++echo "1" > $ovl0/enabled ++echo "1" > $ovl1/enabled ++ ++echo "1" > $tv/enabled ++ ++After this the configuration looks like (only relevant parts shown): ++ ++FB0 +-- GFX ---- LCD ---- LCD ++ \- VID1 ---- TV ---- TV ++ ++Misc notes ++---------- ++ ++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. ++ ++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock ++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. ++ ++Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB ++does not support mirroring. ++ ++VRFB rotation requires much more memory than non-rotated framebuffer, so you ++probably need to increase your vram setting before using VRFB rotation. Also, ++many applications may not work with VRFB if they do not pay attention to all ++framebuffer parameters. ++ ++Kernel boot arguments ++--------------------- ++ ++vram=<size> ++ - Amount of total VRAM to preallocate. For example, "10M". omapfb ++ allocates memory for framebuffers from VRAM. ++ ++omapfb.mode=<display>:<mode>[,...] ++ - Default video mode for specified displays. For example, ++ "dvi:800x400MR-24@60". See drivers/video/modedb.c. ++ There are also two special modes: "pal" and "ntsc" that ++ can be used to tv out. ++ ++omapfb.vram=<fbnum>:<size>[@<physaddr>][,...] ++ - VRAM allocated for a framebuffer. Normally omapfb allocates vram ++ depending on the display size. With this you can manually allocate ++ more or define the physical address of each framebuffer. For example, ++ "1:4M" to allocate 4M for fb1. ++ ++omapfb.debug=<y|n> ++ - Enable debug printing. You have to have OMAPFB debug support enabled ++ in kernel config. ++ ++omapfb.test=<y|n> ++ - Draw test pattern to framebuffer whenever framebuffer settings change. ++ You need to have OMAPFB debug support enabled in kernel config. ++ ++omapfb.vrfb=<y|n> ++ - Use VRFB rotation for all framebuffers. ++ ++omapfb.rotate=<angle> ++ - Default rotation applied to all framebuffers. ++ 0 - 0 degree rotation ++ 1 - 90 degree rotation ++ 2 - 180 degree rotation ++ 3 - 270 degree rotation ++ ++omapfb.mirror=<y|n> ++ - Default mirror for all framebuffers. Only works with DMA rotation. ++ ++omapdss.def_disp=<display> ++ - Name of default display, to which all overlays will be connected. ++ Common examples are "lcd" or "tv". ++ ++omapdss.debug=<y|n> ++ - Enable debug printing. You have to have DSS debug support enabled in ++ kernel config. ++ ++TODO ++---- ++ ++DSS locking ++ ++Error checking ++- Lots of checks are missing or implemented just as BUG() ++ ++System DMA update for DSI ++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how ++ to skip the empty byte?) ++ ++OMAP1 support ++- Not sure if needed ++ +diff --git a/MAINTAINERS b/MAINTAINERS +index 8824115..3f5d39f 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3819,6 +3819,23 @@ L: linux-omap@vger.kernel.org + S: Maintained + F: drivers/video/omap/ + ++OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2) ++M: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) ++L: linux-omap@vger.kernel.org ++S: Maintained ++F: drivers/video/omap2/dss/ ++F: drivers/video/omap2/vrfb.c ++F: drivers/video/omap2/vram.c ++F: Documentation/arm/OMAP/DSS ++ ++OMAP FRAMEBUFFER SUPPORT (FOR DSS2) ++M: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) ++L: linux-omap@vger.kernel.org ++S: Maintained ++F: drivers/video/omap2/omapfb/ ++ + OMAP MMC SUPPORT + M: Jarkko Lavinen <jarkko.lavinen@nokia.com> + L: linux-omap@vger.kernel.org +diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig +index 8a4a7e2..59e26e4 100644 +--- a/arch/arm/configs/omap_3430sdp_defconfig ++++ b/arch/arm/configs/omap_3430sdp_defconfig +@@ -1336,10 +1336,33 @@ CONFIG_FB_CFB_IMAGEBLIT=y + # + # CONFIG_FB_S1D13XXX is not set + # CONFIG_FB_VIRTUAL is not set +-CONFIG_FB_OMAP=y +-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_BROADSHEET is not set ++# CONFIG_FB_OMAP_LCD_VGA is not set + # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 ++CONFIG_OMAP2_VRAM=y ++CONFIG_OMAP2_VRFB=y ++CONFIG_OMAP2_DSS=y ++CONFIG_OMAP2_VRAM_SIZE=4 ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++CONFIG_FB_OMAP2=y ++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=y ++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set ++CONFIG_PANEL_SHARP_LS037V7DW01=y + # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + + # +diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c +index ed2a48a..6fbde33 100644 +--- a/arch/arm/mach-omap1/board-nokia770.c ++++ b/arch/arm/mach-omap1/board-nokia770.c +@@ -14,6 +14,7 @@ + #include <linux/platform_device.h> + #include <linux/input.h> + #include <linux/clk.h> ++#include <linux/omapfb.h> + + #include <linux/spi/spi.h> + #include <linux/spi/ads7846.h> +@@ -32,7 +33,6 @@ + #include <mach/keypad.h> + #include <mach/common.h> + #include <mach/dsp_common.h> +-#include <mach/omapfb.h> + #include <mach/hwa742.h> + #include <mach/lcd_mipid.h> + #include <mach/mmc.h> +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index efaf053..60631be 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -36,6 +36,7 @@ + #include <mach/common.h> + #include <mach/dma.h> + #include <mach/gpmc.h> ++#include <mach/display.h> + + #include <mach/control.h> + #include <mach/keypad.h> +@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { + }, + }; + +-static struct platform_device sdp3430_lcd_device = { +- .name = "sdp2430_lcd", +- .id = -1, ++ ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 ++ ++static unsigned backlight_gpio; ++static unsigned enable_gpio; ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init sdp3430_display_init(void) ++{ ++ int r; ++ ++ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; ++ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; ++ ++ r = gpio_request(enable_gpio, "LCD reset"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD reset GPIO\n"); ++ goto err0; ++ } ++ ++ r = gpio_request(backlight_gpio, "LCD Backlight"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD backlight GPIO\n"); ++ goto err1; ++ } ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ return; ++err1: ++ gpio_free(enable_gpio); ++err0: ++ return; ++} ++ ++static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ gpio_direction_output(enable_gpio, 1); ++ gpio_direction_output(backlight_gpio, 1); ++ ++ lcd_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) ++{ ++ lcd_enabled = 0; ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++} ++ ++static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ dvi_enabled = 0; ++} ++ ++static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) ++{ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) ++{ ++} ++ ++ ++static struct omap_dss_device sdp3430_lcd_device = { ++ .name = "lcd", ++ .driver_name = "sharp_ls_panel", ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .phy.dpi.data_lines = 16, ++ .platform_enable = sdp3430_panel_enable_lcd, ++ .platform_disable = sdp3430_panel_disable_lcd, + }; + +-static struct regulator_consumer_supply sdp3430_vdac_supply = { +- .supply = "vdac", +- .dev = &sdp3430_lcd_device.dev, ++static struct omap_dss_device sdp3430_dvi_device = { ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .phy.dpi.data_lines = 24, ++ .platform_enable = sdp3430_panel_enable_dvi, ++ .platform_disable = sdp3430_panel_disable_dvi, + }; + +-static struct regulator_consumer_supply sdp3430_vdvi_supply = { +- .supply = "vdvi", +- .dev = &sdp3430_lcd_device.dev, ++static struct omap_dss_device sdp3430_tv_device = { ++ .name = "tv", ++ .driver_name = "venc", ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .platform_enable = sdp3430_panel_enable_tv, ++ .platform_disable = sdp3430_panel_disable_tv, + }; + +-static struct platform_device *sdp3430_devices[] __initdata = { ++ ++static struct omap_dss_device *sdp3430_dss_devices[] = { + &sdp3430_lcd_device, ++ &sdp3430_dvi_device, ++ &sdp3430_tv_device, + }; + +-static struct omap_lcd_config sdp3430_lcd_config __initdata = { +- .ctrl_name = "internal", ++static struct omap_dss_board_info sdp3430_dss_data = { ++ .num_devices = ARRAY_SIZE(sdp3430_dss_devices), ++ .devices = sdp3430_dss_devices, ++ .default_device = &sdp3430_lcd_device, ++}; ++ ++static struct platform_device sdp3430_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &sdp3430_dss_data, ++ }, ++}; ++ ++static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { ++ .supply = "vdda_dac", ++ .dev = &sdp3430_dss_device.dev, ++}; ++ ++static struct platform_device *sdp3430_devices[] __initdata = { ++ &sdp3430_dss_device, + }; + + static struct omap_board_config_kernel sdp3430_config[] __initdata = { +- { OMAP_TAG_LCD, &sdp3430_lcd_config }, + }; + + static void __init omap_3430sdp_init_irq(void) +@@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = { + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, +- .consumer_supplies = &sdp3430_vdac_supply, ++ .consumer_supplies = &sdp3430_vdda_dac_supply, + }; + + /* VPLL2 for digital video outputs */ ++static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { ++ { ++ .supply = "vdvi", ++ .dev = &sdp3430_lcd_device.dev, ++ }, ++ { ++ .supply = "vdds_dsi", ++ .dev = &sdp3430_dss_device.dev, ++ } ++}; ++ + static struct regulator_init_data sdp3430_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, ++ .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +- .num_consumer_supplies = 1, +- .consumer_supplies = &sdp3430_vdvi_supply, ++ .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), ++ .consumer_supplies = sdp3430_vpll2_supplies, + }; + + static struct twl4030_platform_data sdp3430_twldata = { +@@ -499,6 +633,7 @@ static void __init omap_3430sdp_init(void) + omap_serial_init(); + usb_musb_init(); + board_smc91x_init(); ++ sdp3430_display_init(); + enable_board_wakeup_source(); + } + +diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c +index e2dbedd..8524067 100644 +--- a/arch/arm/mach-omap2/clock24xx.c ++++ b/arch/arm/mach-omap2/clock24xx.c +@@ -116,10 +116,10 @@ static struct omap_clk omap24xx_clks[] = { + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ +- CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), +- CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), +- CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), +- CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), ++ CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), ++ CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), ++ CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), ++ CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), +diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c +index 489556e..0a7e9ac 100644 +--- a/arch/arm/mach-omap2/clock34xx.c ++++ b/arch/arm/mach-omap2/clock34xx.c +@@ -236,13 +236,13 @@ static struct omap_clk omap34xx_clks[] = { + CLK("omap_rng", "ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), +- CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), +- CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), +- CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), +- CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), +- CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), +- CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), +- CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), ++ CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), ++ CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), ++ CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), ++ CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), ++ CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), ++ CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), ++ CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), +diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c +index e3a3bad..adbb905 100644 +--- a/arch/arm/mach-omap2/io.c ++++ b/arch/arm/mach-omap2/io.c +@@ -22,17 +22,18 @@ + #include <linux/init.h> + #include <linux/io.h> + #include <linux/clk.h> ++#include <linux/omapfb.h> + + #include <asm/tlb.h> + + #include <asm/mach/map.h> + + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <mach/sram.h> + #include <mach/sdrc.h> + #include <mach/gpmc.h> + #include <mach/serial.h> ++#include <mach/vram.h> + + #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ + #include "clock.h" +@@ -246,6 +247,7 @@ void __init omap2_map_common_io(void) + omap2_check_revision(); + omap_sram_init(); + omapfb_reserve_sdram(); ++ omap_vram_reserve_sdram(); + } + + /* +diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c +index 9e3bd4f..6a5a2c5 100644 +--- a/arch/arm/mach-omap2/sdrc.c ++++ b/arch/arm/mach-omap2/sdrc.c +@@ -133,3 +133,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + (1 << SDRC_POWER_PAGEPOLICY_SHIFT); + sdrc_write_reg(l, SDRC_POWER); + } ++ ++void omap2_sms_write_rot_control(u32 val, unsigned ctx) ++{ ++ sms_write_reg(val, SMS_ROT_CONTROL(ctx)); ++} ++ ++void omap2_sms_write_rot_size(u32 val, unsigned ctx) ++{ ++ sms_write_reg(val, SMS_ROT_SIZE(ctx)); ++} ++ ++void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) ++{ ++ sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); ++} ++ +diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c +index 3746222..70fbeae 100644 +--- a/arch/arm/plat-omap/fb.c ++++ b/arch/arm/plat-omap/fb.c +@@ -28,13 +28,13 @@ + #include <linux/platform_device.h> + #include <linux/bootmem.h> + #include <linux/io.h> ++#include <linux/omapfb.h> + + #include <mach/hardware.h> + #include <asm/mach/map.h> + + #include <mach/board.h> + #include <mach/sram.h> +-#include <mach/omapfb.h> + + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +@@ -327,7 +327,33 @@ static inline int omap_init_fb(void) + + arch_initcall(omap_init_fb); + +-#else ++#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) ++ ++static u64 omap_fb_dma_mask = ~(u32)0; ++static struct omapfb_platform_data omapfb_config; ++ ++static struct platform_device omap_fb_device = { ++ .name = "omapfb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &omap_fb_dma_mask, ++ .coherent_dma_mask = ~(u32)0, ++ .platform_data = &omapfb_config, ++ }, ++ .num_resources = 0, ++}; ++ ++void omapfb_set_platform_data(struct omapfb_platform_data *data) ++{ ++ omapfb_config = *data; ++} ++ ++static inline int omap_init_fb(void) ++{ ++ return platform_device_register(&omap_fb_device); ++} ++ ++arch_initcall(omap_init_fb); + + void omapfb_reserve_sdram(void) {} + unsigned long omapfb_reserve_sram(unsigned long sram_pstart, +@@ -339,5 +365,16 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + return 0; + } + ++#else ++ ++void omapfb_reserve_sdram(void) {} ++unsigned long omapfb_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long start_avail, ++ unsigned long size_avail) ++{ ++ return 0; ++} + + #endif +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +new file mode 100644 +index 0000000..4c7422e +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -0,0 +1,540 @@ ++/* ++ * linux/include/asm-arm/arch-omap/display.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __ASM_ARCH_OMAP_DISPLAY_H ++#define __ASM_ARCH_OMAP_DISPLAY_H ++ ++#include <linux/list.h> ++#include <linux/kobject.h> ++#include <linux/device.h> ++#include <asm/atomic.h> ++ ++#define DISPC_IRQ_FRAMEDONE (1 << 0) ++#define DISPC_IRQ_VSYNC (1 << 1) ++#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) ++#define DISPC_IRQ_EVSYNC_ODD (1 << 3) ++#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) ++#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) ++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) ++#define DISPC_IRQ_GFX_END_WIN (1 << 7) ++#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) ++#define DISPC_IRQ_OCP_ERR (1 << 9) ++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) ++#define DISPC_IRQ_VID1_END_WIN (1 << 11) ++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) ++#define DISPC_IRQ_VID2_END_WIN (1 << 13) ++#define DISPC_IRQ_SYNC_LOST (1 << 14) ++#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) ++#define DISPC_IRQ_WAKEUP (1 << 16) ++ ++struct omap_dss_device; ++struct omap_overlay_manager; ++ ++enum omap_display_type { ++ OMAP_DISPLAY_TYPE_NONE = 0, ++ OMAP_DISPLAY_TYPE_DPI = 1 << 0, ++ OMAP_DISPLAY_TYPE_DBI = 1 << 1, ++ OMAP_DISPLAY_TYPE_SDI = 1 << 2, ++ OMAP_DISPLAY_TYPE_DSI = 1 << 3, ++ OMAP_DISPLAY_TYPE_VENC = 1 << 4, ++}; ++ ++enum omap_plane { ++ OMAP_DSS_GFX = 0, ++ OMAP_DSS_VIDEO1 = 1, ++ OMAP_DSS_VIDEO2 = 2 ++}; ++ ++enum omap_channel { ++ OMAP_DSS_CHANNEL_LCD = 0, ++ OMAP_DSS_CHANNEL_DIGIT = 1, ++}; ++ ++enum omap_color_mode { ++ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ ++ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ ++ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ ++ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ ++ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ ++ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ ++ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ ++ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ ++ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ ++ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ ++ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ ++ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ ++ ++ OMAP_DSS_COLOR_GFX_OMAP3 = ++ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | ++ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, ++ ++ OMAP_DSS_COLOR_VID_OMAP3 = ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 | ++ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, ++}; ++ ++enum omap_lcd_display_type { ++ OMAP_DSS_LCD_DISPLAY_STN, ++ OMAP_DSS_LCD_DISPLAY_TFT, ++}; ++ ++enum omap_dss_load_mode { ++ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, ++ OMAP_DSS_LOAD_CLUT_ONLY = 1, ++ OMAP_DSS_LOAD_FRAME_ONLY = 2, ++ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, ++}; ++ ++enum omap_dss_trans_key_type { ++ OMAP_DSS_COLOR_KEY_GFX_DST = 0, ++ OMAP_DSS_COLOR_KEY_VID_SRC = 1, ++}; ++ ++enum omap_rfbi_te_mode { ++ OMAP_DSS_RFBI_TE_MODE_1 = 1, ++ OMAP_DSS_RFBI_TE_MODE_2 = 2, ++}; ++ ++enum omap_panel_config { ++ OMAP_DSS_LCD_IVS = 1<<0, ++ OMAP_DSS_LCD_IHS = 1<<1, ++ OMAP_DSS_LCD_IPC = 1<<2, ++ OMAP_DSS_LCD_IEO = 1<<3, ++ OMAP_DSS_LCD_RF = 1<<4, ++ OMAP_DSS_LCD_ONOFF = 1<<5, ++ ++ OMAP_DSS_LCD_TFT = 1<<20, ++}; ++ ++enum omap_dss_venc_type { ++ OMAP_DSS_VENC_TYPE_COMPOSITE, ++ OMAP_DSS_VENC_TYPE_SVIDEO, ++}; ++ ++enum omap_display_caps { ++ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, ++}; ++ ++enum omap_dss_update_mode { ++ OMAP_DSS_UPDATE_DISABLED = 0, ++ OMAP_DSS_UPDATE_AUTO, ++ OMAP_DSS_UPDATE_MANUAL, ++}; ++ ++enum omap_dss_display_state { ++ OMAP_DSS_DISPLAY_DISABLED = 0, ++ OMAP_DSS_DISPLAY_ACTIVE, ++ OMAP_DSS_DISPLAY_SUSPENDED, ++}; ++ ++/* XXX perhaps this should be removed */ ++enum omap_dss_overlay_managers { ++ OMAP_DSS_OVL_MGR_LCD, ++ OMAP_DSS_OVL_MGR_TV, ++}; ++ ++enum omap_dss_rotation_type { ++ OMAP_DSS_ROT_DMA = 0, ++ OMAP_DSS_ROT_VRFB = 1, ++}; ++ ++enum omap_overlay_caps { ++ OMAP_DSS_OVL_CAP_SCALE = 1 << 0, ++ OMAP_DSS_OVL_CAP_DISPC = 1 << 1, ++}; ++ ++enum omap_overlay_manager_caps { ++ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, ++}; ++ ++/* RFBI */ ++ ++struct rfbi_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by rfbi_convert_timings() */ ++ ++ int converted; ++}; ++ ++void omap_rfbi_write_command(const void *buf, u32 len); ++void omap_rfbi_read_data(void *buf, u32 len); ++void omap_rfbi_write_data(const void *buf, u32 len); ++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, ++ u16 x, u16 y, ++ u16 w, u16 h); ++int omap_rfbi_enable_te(bool enable, unsigned line); ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div); ++ ++/* DSI */ ++void dsi_bus_lock(void); ++void dsi_bus_unlock(void); ++int dsi_vc_dcs_write(int channel, u8 *data, int len); ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len); ++int dsi_vc_send_null(int channel); ++int dsi_vc_send_bta_sync(int channel); ++ ++/* Board specific data */ ++struct omap_dss_board_info { ++ int (*get_last_off_on_transaction_id)(struct device *dev); ++ int num_devices; ++ struct omap_dss_device **devices; ++ struct omap_dss_device *default_device; ++}; ++ ++struct omap_video_timings { ++ /* Unit: pixels */ ++ u16 x_res; ++ /* Unit: pixels */ ++ u16 y_res; ++ /* Unit: KHz */ ++ u32 pixel_clock; ++ /* Unit: pixel clocks */ ++ u16 hsw; /* Horizontal synchronization pulse width */ ++ /* Unit: pixel clocks */ ++ u16 hfp; /* Horizontal front porch */ ++ /* Unit: pixel clocks */ ++ u16 hbp; /* Horizontal back porch */ ++ /* Unit: line clocks */ ++ u16 vsw; /* Vertical synchronization pulse width */ ++ /* Unit: line clocks */ ++ u16 vfp; /* Vertical front porch */ ++ /* Unit: line clocks */ ++ u16 vbp; /* Vertical back porch */ ++}; ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++/* Hardcoded timings for tv modes. Venc only uses these to ++ * identify the mode, and does not actually use the configs ++ * itself. However, the configs should be something that ++ * a normal monitor can also show */ ++const extern struct omap_video_timings omap_dss_pal_timings; ++const extern struct omap_video_timings omap_dss_ntsc_timings; ++#endif ++ ++struct omap_overlay_info { ++ bool enabled; ++ ++ u32 paddr; ++ void __iomem *vaddr; ++ u16 screen_width; ++ u16 width; ++ u16 height; ++ enum omap_color_mode color_mode; ++ u8 rotation; ++ enum omap_dss_rotation_type rotation_type; ++ bool mirror; ++ ++ u16 pos_x; ++ u16 pos_y; ++ u16 out_width; /* if 0, out_width == width */ ++ u16 out_height; /* if 0, out_height == height */ ++ u8 global_alpha; ++}; ++ ++struct omap_overlay { ++ struct kobject kobj; ++ struct list_head list; ++ ++ /* static fields */ ++ const char *name; ++ int id; ++ enum omap_color_mode supported_modes; ++ enum omap_overlay_caps caps; ++ ++ /* dynamic fields */ ++ struct omap_overlay_manager *manager; ++ struct omap_overlay_info info; ++ ++ /* if true, info has been changed, but not applied() yet */ ++ bool info_dirty; ++ ++ int (*set_manager)(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr); ++ int (*unset_manager)(struct omap_overlay *ovl); ++ ++ int (*set_overlay_info)(struct omap_overlay *ovl, ++ struct omap_overlay_info *info); ++ void (*get_overlay_info)(struct omap_overlay *ovl, ++ struct omap_overlay_info *info); ++ ++ int (*wait_for_go)(struct omap_overlay *ovl); ++}; ++ ++struct omap_overlay_manager_info { ++ u32 default_color; ++ ++ enum omap_dss_trans_key_type trans_key_type; ++ u32 trans_key; ++ bool trans_enabled; ++ ++ bool alpha_enabled; ++}; ++ ++struct omap_overlay_manager { ++ struct kobject kobj; ++ struct list_head list; ++ ++ /* static fields */ ++ const char *name; ++ int id; ++ enum omap_overlay_manager_caps caps; ++ int num_overlays; ++ struct omap_overlay **overlays; ++ enum omap_display_type supported_displays; ++ ++ /* dynamic fields */ ++ struct omap_dss_device *device; ++ struct omap_overlay_manager_info info; ++ ++ bool device_changed; ++ /* if true, info has been changed but not applied() yet */ ++ bool info_dirty; ++ ++ int (*set_device)(struct omap_overlay_manager *mgr, ++ struct omap_dss_device *dssdev); ++ int (*unset_device)(struct omap_overlay_manager *mgr); ++ ++ int (*set_manager_info)(struct omap_overlay_manager *mgr, ++ struct omap_overlay_manager_info *info); ++ void (*get_manager_info)(struct omap_overlay_manager *mgr, ++ struct omap_overlay_manager_info *info); ++ ++ int (*apply)(struct omap_overlay_manager *mgr); ++ int (*wait_for_go)(struct omap_overlay_manager *mgr); ++}; ++ ++struct omap_dss_device { ++ struct device dev; ++ ++ enum omap_display_type type; ++ ++ union { ++ struct { ++ u8 data_lines; ++ } dpi; ++ ++ struct { ++ u8 channel; ++ u8 data_lines; ++ } rfbi; ++ ++ struct { ++ u8 datapairs; ++ } sdi; ++ ++ struct { ++ u8 clk_lane; ++ u8 clk_pol; ++ u8 data1_lane; ++ u8 data1_pol; ++ u8 data2_lane; ++ u8 data2_pol; ++ unsigned long lp_clk_hz; ++ unsigned long ddr_clk_hz; ++ ++ bool ext_te; ++ u8 ext_te_gpio; ++ } dsi; ++ ++ struct { ++ enum omap_dss_venc_type type; ++ bool invert_polarity; ++ } venc; ++ } phy; ++ ++ struct { ++ struct omap_video_timings timings; ++ ++ int acbi; /* ac-bias pin transitions per interrupt */ ++ /* Unit: line clocks */ ++ int acb; /* ac-bias pin frequency */ ++ ++ enum omap_panel_config config; ++ ++ u8 recommended_bpp; ++ ++ struct omap_dss_device *ctrl; ++ } panel; ++ ++ struct { ++ u8 pixel_size; ++ struct rfbi_timings rfbi_timings; ++ struct omap_dss_device *panel; ++ } ctrl; ++ ++ int reset_gpio; ++ ++ int max_backlight_level; ++ ++ const char *name; ++ ++ /* used to match device to driver */ ++ const char *driver_name; ++ ++ void *data; ++ ++ struct omap_dss_driver *driver; ++ ++ /* helper variable for driver suspend/resume */ ++ bool activate_after_resume; ++ ++ enum omap_display_caps caps; ++ ++ struct omap_overlay_manager *manager; ++ ++ enum omap_dss_display_state state; ++ ++ int (*enable)(struct omap_dss_device *dssdev); ++ void (*disable)(struct omap_dss_device *dssdev); ++ ++ int (*suspend)(struct omap_dss_device *dssdev); ++ int (*resume)(struct omap_dss_device *dssdev); ++ ++ void (*get_resolution)(struct omap_dss_device *dssdev, ++ u16 *xres, u16 *yres); ++ int (*get_recommended_bpp)(struct omap_dss_device *dssdev); ++ ++ int (*check_timings)(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings); ++ void (*set_timings)(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings); ++ void (*get_timings)(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings); ++ int (*update)(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h); ++ int (*sync)(struct omap_dss_device *dssdev); ++ int (*wait_vsync)(struct omap_dss_device *dssdev); ++ ++ int (*set_update_mode)(struct omap_dss_device *dssdev, ++ enum omap_dss_update_mode); ++ enum omap_dss_update_mode (*get_update_mode) ++ (struct omap_dss_device *dssdev); ++ ++ int (*enable_te)(struct omap_dss_device *dssdev, bool enable); ++ int (*get_te)(struct omap_dss_device *dssdev); ++ ++ u8 (*get_rotate)(struct omap_dss_device *dssdev); ++ int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); ++ ++ bool (*get_mirror)(struct omap_dss_device *dssdev); ++ int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); ++ ++ int (*run_test)(struct omap_dss_device *dssdev, int test); ++ int (*memory_read)(struct omap_dss_device *dssdev, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h); ++ ++ int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); ++ u32 (*get_wss)(struct omap_dss_device *dssdev); ++ ++ /* platform specific */ ++ int (*platform_enable)(struct omap_dss_device *dssdev); ++ void (*platform_disable)(struct omap_dss_device *dssdev); ++ int (*set_backlight)(struct omap_dss_device *dssdev, int level); ++ int (*get_backlight)(struct omap_dss_device *dssdev); ++}; ++ ++struct omap_dss_driver { ++ struct device_driver driver; ++ ++ int (*probe)(struct omap_dss_device *); ++ void (*remove)(struct omap_dss_device *); ++ ++ int (*enable)(struct omap_dss_device *display); ++ void (*disable)(struct omap_dss_device *display); ++ int (*suspend)(struct omap_dss_device *display); ++ int (*resume)(struct omap_dss_device *display); ++ int (*run_test)(struct omap_dss_device *display, int test); ++ ++ void (*setup_update)(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h); ++ ++ int (*enable_te)(struct omap_dss_device *dssdev, bool enable); ++ int (*wait_for_te)(struct omap_dss_device *dssdev); ++ ++ u8 (*get_rotate)(struct omap_dss_device *dssdev); ++ int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); ++ ++ bool (*get_mirror)(struct omap_dss_device *dssdev); ++ int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); ++ ++ int (*memory_read)(struct omap_dss_device *dssdev, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h); ++}; ++ ++int omap_dss_register_driver(struct omap_dss_driver *); ++void omap_dss_unregister_driver(struct omap_dss_driver *); ++ ++int omap_dss_register_device(struct omap_dss_device *); ++void omap_dss_unregister_device(struct omap_dss_device *); ++ ++void omap_dss_get_device(struct omap_dss_device *dssdev); ++void omap_dss_put_device(struct omap_dss_device *dssdev); ++#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) ++struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); ++struct omap_dss_device *omap_dss_find_device(void *data, ++ int (*match)(struct omap_dss_device *dssdev, void *data)); ++ ++int omap_dss_start_device(struct omap_dss_device *dssdev); ++void omap_dss_stop_device(struct omap_dss_device *dssdev); ++ ++int omap_dss_get_num_overlay_managers(void); ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); ++ ++int omap_dss_get_num_overlays(void); ++struct omap_overlay *omap_dss_get_overlay(int num); ++ ++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++ ++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); ++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, ++ unsigned long timeout); ++ ++#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) ++#define to_dss_device(x) container_of((x), struct omap_dss_device, dev) ++ ++#endif +diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h +deleted file mode 100644 +index b226bdf..0000000 +--- a/arch/arm/plat-omap/include/mach/omapfb.h ++++ /dev/null +@@ -1,398 +0,0 @@ +-/* +- * File: arch/arm/plat-omap/include/mach/omapfb.h +- * +- * Framebuffer driver for TI OMAP boards +- * +- * Copyright (C) 2004 Nokia Corporation +- * Author: Imre Deak <imre.deak@nokia.com> +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- * +- * This program is distributed in the hope that it will be useful, but +- * WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- * General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License along +- * with this program; if not, write to the Free Software Foundation, Inc., +- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +- */ +- +-#ifndef __OMAPFB_H +-#define __OMAPFB_H +- +-#include <asm/ioctl.h> +-#include <asm/types.h> +- +-/* IOCTL commands. */ +- +-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +-#define OMAP_IO(num) _IO('O', num) +- +-#define OMAPFB_MIRROR OMAP_IOW(31, int) +-#define OMAPFB_SYNC_GFX OMAP_IO(37) +-#define OMAPFB_VSYNC OMAP_IO(38) +-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) +-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) +-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) +-#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) +-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) +-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) +-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) +-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) +-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) +-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) +-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) +- +-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +-#define OMAPFB_CAPS_PANEL_MASK 0xff000000 +- +-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +-#define OMAPFB_CAPS_TEARSYNC 0x00002000 +-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 +-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 +-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 +-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 +-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +-#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 +-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 +- +-/* Values from DSP must map to lower 16-bits */ +-#define OMAPFB_FORMAT_MASK 0x00ff +-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 +-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 +-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 +-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 +-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 +- +-#define OMAPFB_EVENT_READY 1 +-#define OMAPFB_EVENT_DISABLED 2 +- +-#define OMAPFB_MEMTYPE_SDRAM 0 +-#define OMAPFB_MEMTYPE_SRAM 1 +-#define OMAPFB_MEMTYPE_MAX 1 +- +-enum omapfb_color_format { +- OMAPFB_COLOR_RGB565 = 0, +- OMAPFB_COLOR_YUV422, +- OMAPFB_COLOR_YUV420, +- OMAPFB_COLOR_CLUT_8BPP, +- OMAPFB_COLOR_CLUT_4BPP, +- OMAPFB_COLOR_CLUT_2BPP, +- OMAPFB_COLOR_CLUT_1BPP, +- OMAPFB_COLOR_RGB444, +- OMAPFB_COLOR_YUY422, +-}; +- +-struct omapfb_update_window { +- __u32 x, y; +- __u32 width, height; +- __u32 format; +- __u32 out_x, out_y; +- __u32 out_width, out_height; +- __u32 reserved[8]; +-}; +- +-struct omapfb_update_window_old { +- __u32 x, y; +- __u32 width, height; +- __u32 format; +-}; +- +-enum omapfb_plane { +- OMAPFB_PLANE_GFX = 0, +- OMAPFB_PLANE_VID1, +- OMAPFB_PLANE_VID2, +-}; +- +-enum omapfb_channel_out { +- OMAPFB_CHANNEL_OUT_LCD = 0, +- OMAPFB_CHANNEL_OUT_DIGIT, +-}; +- +-struct omapfb_plane_info { +- __u32 pos_x; +- __u32 pos_y; +- __u8 enabled; +- __u8 channel_out; +- __u8 mirror; +- __u8 reserved1; +- __u32 out_width; +- __u32 out_height; +- __u32 reserved2[12]; +-}; +- +-struct omapfb_mem_info { +- __u32 size; +- __u8 type; +- __u8 reserved[3]; +-}; +- +-struct omapfb_caps { +- __u32 ctrl; +- __u32 plane_color; +- __u32 wnd_color; +-}; +- +-enum omapfb_color_key_type { +- OMAPFB_COLOR_KEY_DISABLED = 0, +- OMAPFB_COLOR_KEY_GFX_DST, +- OMAPFB_COLOR_KEY_VID_SRC, +-}; +- +-struct omapfb_color_key { +- __u8 channel_out; +- __u32 background; +- __u32 trans_key; +- __u8 key_type; +-}; +- +-enum omapfb_update_mode { +- OMAPFB_UPDATE_DISABLED = 0, +- OMAPFB_AUTO_UPDATE, +- OMAPFB_MANUAL_UPDATE +-}; +- +-#ifdef __KERNEL__ +- +-#include <linux/completion.h> +-#include <linux/interrupt.h> +-#include <linux/fb.h> +-#include <linux/mutex.h> +- +-#include <mach/board.h> +- +-#define OMAP_LCDC_INV_VSYNC 0x0001 +-#define OMAP_LCDC_INV_HSYNC 0x0002 +-#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +-#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +-#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +-#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 +- +-#define OMAP_LCDC_SIGNAL_MASK 0x003f +- +-#define OMAP_LCDC_PANEL_TFT 0x0100 +- +-#define OMAPFB_PLANE_XRES_MIN 8 +-#define OMAPFB_PLANE_YRES_MIN 8 +- +-#ifdef CONFIG_ARCH_OMAP1 +-#define OMAPFB_PLANE_NUM 1 +-#else +-#define OMAPFB_PLANE_NUM 3 +-#endif +- +-struct omapfb_device; +- +-struct lcd_panel { +- const char *name; +- int config; /* TFT/STN, signal inversion */ +- int bpp; /* Pixel format in fb mem */ +- int data_lines; /* Lines on LCD HW interface */ +- +- int x_res, y_res; +- int pixel_clock; /* In kHz */ +- int hsw; /* Horizontal synchronization +- pulse width */ +- int hfp; /* Horizontal front porch */ +- int hbp; /* Horizontal back porch */ +- int vsw; /* Vertical synchronization +- pulse width */ +- int vfp; /* Vertical front porch */ +- int vbp; /* Vertical back porch */ +- int acb; /* ac-bias pin frequency */ +- int pcd; /* pixel clock divider. +- Obsolete use pixel_clock instead */ +- +- int (*init) (struct lcd_panel *panel, +- struct omapfb_device *fbdev); +- void (*cleanup) (struct lcd_panel *panel); +- int (*enable) (struct lcd_panel *panel); +- void (*disable) (struct lcd_panel *panel); +- unsigned long (*get_caps) (struct lcd_panel *panel); +- int (*set_bklight_level)(struct lcd_panel *panel, +- unsigned int level); +- unsigned int (*get_bklight_level)(struct lcd_panel *panel); +- unsigned int (*get_bklight_max) (struct lcd_panel *panel); +- int (*run_test) (struct lcd_panel *panel, int test_num); +-}; +- +-struct extif_timings { +- int cs_on_time; +- int cs_off_time; +- int we_on_time; +- int we_off_time; +- int re_on_time; +- int re_off_time; +- int we_cycle_time; +- int re_cycle_time; +- int cs_pulse_width; +- int access_time; +- +- int clk_div; +- +- u32 tim[5]; /* set by extif->convert_timings */ +- +- int converted; +-}; +- +-struct lcd_ctrl_extif { +- int (*init) (struct omapfb_device *fbdev); +- void (*cleanup) (void); +- void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); +- unsigned long (*get_max_tx_rate)(void); +- int (*convert_timings) (struct extif_timings *timings); +- void (*set_timings) (const struct extif_timings *timings); +- void (*set_bits_per_cycle)(int bpc); +- void (*write_command) (const void *buf, unsigned int len); +- void (*read_data) (void *buf, unsigned int len); +- void (*write_data) (const void *buf, unsigned int len); +- void (*transfer_area) (int width, int height, +- void (callback)(void * data), void *data); +- int (*setup_tearsync) (unsigned pin_cnt, +- unsigned hs_pulse_time, unsigned vs_pulse_time, +- int hs_pol_inv, int vs_pol_inv, int div); +- int (*enable_tearsync) (int enable, unsigned line); +- +- unsigned long max_transmit_size; +-}; +- +-struct omapfb_notifier_block { +- struct notifier_block nb; +- void *data; +- int plane_idx; +-}; +- +-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, +- unsigned long event, +- void *fbi); +- +-struct omapfb_mem_region { +- u32 paddr; +- void __iomem *vaddr; +- unsigned long size; +- u8 type; /* OMAPFB_PLANE_MEM_* */ +- unsigned alloc:1; /* allocated by the driver */ +- unsigned map:1; /* kernel mapped by the driver */ +-}; +- +-struct omapfb_mem_desc { +- int region_cnt; +- struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; +-}; +- +-struct lcd_ctrl { +- const char *name; +- void *data; +- +- int (*init) (struct omapfb_device *fbdev, +- int ext_mode, +- struct omapfb_mem_desc *req_md); +- void (*cleanup) (void); +- void (*bind_client) (struct omapfb_notifier_block *nb); +- void (*get_caps) (int plane, struct omapfb_caps *caps); +- int (*set_update_mode)(enum omapfb_update_mode mode); +- enum omapfb_update_mode (*get_update_mode)(void); +- int (*setup_plane) (int plane, int channel_out, +- unsigned long offset, +- int screen_width, +- int pos_x, int pos_y, int width, +- int height, int color_mode); +- int (*set_rotate) (int angle); +- int (*setup_mem) (int plane, size_t size, +- int mem_type, unsigned long *paddr); +- int (*mmap) (struct fb_info *info, +- struct vm_area_struct *vma); +- int (*set_scale) (int plane, +- int orig_width, int orig_height, +- int out_width, int out_height); +- int (*enable_plane) (int plane, int enable); +- int (*update_window) (struct fb_info *fbi, +- struct omapfb_update_window *win, +- void (*callback)(void *), +- void *callback_data); +- void (*sync) (void); +- void (*suspend) (void); +- void (*resume) (void); +- int (*run_test) (int test_num); +- int (*setcolreg) (u_int regno, u16 red, u16 green, +- u16 blue, u16 transp, +- int update_hw_mem); +- int (*set_color_key) (struct omapfb_color_key *ck); +- int (*get_color_key) (struct omapfb_color_key *ck); +-}; +- +-enum omapfb_state { +- OMAPFB_DISABLED = 0, +- OMAPFB_SUSPENDED= 99, +- OMAPFB_ACTIVE = 100 +-}; +- +-struct omapfb_plane_struct { +- int idx; +- struct omapfb_plane_info info; +- enum omapfb_color_format color_mode; +- struct omapfb_device *fbdev; +-}; +- +-struct omapfb_device { +- int state; +- int ext_lcdc; /* Using external +- LCD controller */ +- struct mutex rqueue_mutex; +- +- int palette_size; +- u32 pseudo_palette[17]; +- +- struct lcd_panel *panel; /* LCD panel */ +- const struct lcd_ctrl *ctrl; /* LCD controller */ +- const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ +- struct lcd_ctrl_extif *ext_if; /* LCD ctrl external +- interface */ +- struct device *dev; +- struct fb_var_screeninfo new_var; /* for mode changes */ +- +- struct omapfb_mem_desc mem_desc; +- struct fb_info *fb_info[OMAPFB_PLANE_NUM]; +-}; +- +-struct omapfb_platform_data { +- struct omap_lcd_config lcd; +- struct omapfb_mem_desc mem_desc; +- void *ctrl_platform_data; +-}; +- +-#ifdef CONFIG_ARCH_OMAP1 +-extern struct lcd_ctrl omap1_lcd_ctrl; +-#else +-extern struct lcd_ctrl omap2_disp_ctrl; +-#endif +- +-extern void omapfb_reserve_sdram(void); +-extern void omapfb_register_panel(struct lcd_panel *panel); +-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +-extern void omapfb_notify_clients(struct omapfb_device *fbdev, +- unsigned long event); +-extern int omapfb_register_client(struct omapfb_notifier_block *nb, +- omapfb_notifier_callback_t callback, +- void *callback_data); +-extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); +-extern int omapfb_update_window_async(struct fb_info *fbi, +- struct omapfb_update_window *win, +- void (*callback)(void *), +- void *callback_data); +- +-/* in arch/arm/plat-omap/fb.c */ +-extern void omapfb_set_ctrl_platform_data(void *pdata); +- +-#endif /* __KERNEL__ */ +- +-#endif /* __OMAPFB_H */ +diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h +index 1c09c78..3b157ce 100644 +--- a/arch/arm/plat-omap/include/mach/sdrc.h ++++ b/arch/arm/plat-omap/include/mach/sdrc.h +@@ -88,7 +88,10 @@ + + /* SMS register offsets - read/write with sms_{read,write}_reg() */ + +-#define SMS_SYSCONFIG 0x010 ++#define SMS_SYSCONFIG 0x010 ++#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) ++#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) ++#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) + /* REVISIT: fill in other SMS registers here */ + + +@@ -121,6 +124,10 @@ int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); + ++void omap2_sms_write_rot_control(u32 val, unsigned ctx); ++void omap2_sms_write_rot_size(u32 val, unsigned ctx); ++void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); ++ + #ifdef CONFIG_ARCH_OMAP2 + + struct memory_timings { +diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h +new file mode 100644 +index 0000000..fe72f81 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/vram.h +@@ -0,0 +1,63 @@ ++/* ++ * VRAM manager for OMAP ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __OMAP_VRAM_H__ ++#define __OMAP_VRAM_H__ ++ ++#include <linux/autoconf.h> ++#include <linux/types.h> ++ ++#define OMAP_VRAM_MEMTYPE_SDRAM 0 ++#define OMAP_VRAM_MEMTYPE_SRAM 1 ++#define OMAP_VRAM_MEMTYPE_MAX 1 ++ ++extern int omap_vram_add_region(unsigned long paddr, size_t size); ++extern int omap_vram_free(unsigned long paddr, size_t size); ++extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); ++extern int omap_vram_reserve(unsigned long paddr, size_t size); ++extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, ++ unsigned long *largest_free_block); ++ ++#ifdef CONFIG_OMAP2_VRAM ++extern void omap_vram_set_sdram_vram(u32 size, u32 start); ++extern void omap_vram_set_sram_vram(u32 size, u32 start); ++ ++extern void omap_vram_reserve_sdram(void); ++extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long pstart_avail, ++ unsigned long size_avail); ++#else ++static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } ++static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } ++ ++static inline void omap_vram_reserve_sdram(void) { } ++static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long pstart_avail, ++ unsigned long size_avail) ++{ ++ return 0; ++} ++#endif ++ ++#endif +diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h +new file mode 100644 +index 0000000..8790612 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/vrfb.h +@@ -0,0 +1,46 @@ ++/* ++ * VRFB Rotation Engine ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __OMAP_VRFB_H__ ++#define __OMAP_VRFB_H__ ++ ++#define OMAP_VRFB_LINE_LEN 2048 ++ ++struct vrfb { ++ u8 context; ++ void __iomem *vaddr[4]; ++ unsigned long paddr[4]; ++ u16 xoffset; ++ u16 yoffset; ++ u8 bytespp; ++}; ++ ++extern int omap_vrfb_request_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_release_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_suspend_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_resume_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_adjust_size(u16 *width, u16 *height, ++ u8 bytespp); ++extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, ++ u16 width, u16 height, ++ unsigned bytespp, bool yuv_mode); ++extern void omap_vrfb_restore_context(void); ++ ++#endif /* __VRFB_H */ +diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c +index 75d1f26..aa9fb63 100644 +--- a/arch/arm/plat-omap/sram.c ++++ b/arch/arm/plat-omap/sram.c +@@ -28,6 +28,7 @@ + #include <mach/sram.h> + #include <mach/board.h> + #include <mach/cpu.h> ++#include <mach/vram.h> + + #include <mach/control.h> + +@@ -185,6 +186,13 @@ void __init omap_detect_sram(void) + omap_sram_start + SRAM_BOOTLOADER_SZ, + omap_sram_size - SRAM_BOOTLOADER_SZ); + omap_sram_size -= reserved; ++ ++ reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, ++ omap_sram_size, ++ omap_sram_start + SRAM_BOOTLOADER_SZ, ++ omap_sram_size - SRAM_BOOTLOADER_SZ); ++ omap_sram_size -= reserved; ++ + omap_sram_ceil = omap_sram_base + omap_sram_size; + } + +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 9bbb285..af0448f 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -2161,6 +2161,7 @@ config FB_BROADSHEET + a bridge adapter. + + source "drivers/video/omap/Kconfig" ++source "drivers/video/omap2/Kconfig" + + source "drivers/video/backlight/Kconfig" + source "drivers/video/display/Kconfig" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 80232e1..0f8da33 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o + obj-$(CONFIG_FB_OMAP) += omap/ ++obj-y += omap2/ + obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o + obj-$(CONFIG_FB_CARMINE) += carminefb.o + obj-$(CONFIG_FB_MB862XX) += mb862xx/ +diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig +index 551e3e9..455c605 100644 +--- a/drivers/video/omap/Kconfig ++++ b/drivers/video/omap/Kconfig +@@ -1,6 +1,7 @@ + config FB_OMAP + tristate "OMAP frame buffer support (EXPERIMENTAL)" +- depends on FB && ARCH_OMAP ++ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") ++ + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID + + config FB_OMAP_BOOTLOADER_INIT + bool "Check bootloader initialization" +- depends on FB_OMAP ++ depends on FB_OMAP || FB_OMAP2 + help + Say Y here if you want to enable checking if the bootloader has + already initialized the display controller. In this case the +diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c +index 70dadf9..e0d693e 100644 +--- a/drivers/video/omap/blizzard.c ++++ b/drivers/video/omap/blizzard.c +@@ -27,9 +27,9 @@ + #include <linux/clk.h> + + #include <mach/dma.h> +-#include <mach/omapfb.h> + #include <mach/blizzard.h> + ++#include "omapfb.h" + #include "dispc.h" + + #define MODULE_NAME "blizzard" +diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c +index f16e421..3f828e6 100644 +--- a/drivers/video/omap/dispc.c ++++ b/drivers/video/omap/dispc.c +@@ -24,11 +24,12 @@ + #include <linux/vmalloc.h> + #include <linux/clk.h> + #include <linux/io.h> ++#include <linux/platform_device.h> + + #include <mach/sram.h> +-#include <mach/omapfb.h> + #include <mach/board.h> + ++#include "omapfb.h" + #include "dispc.h" + + #define MODULE_NAME "dispc" +@@ -188,6 +189,11 @@ static struct { + struct omapfb_color_key color_key; + } dispc; + ++static struct platform_device omapdss_device = { ++ .name = "omapdss", ++ .id = -1, ++}; ++ + static void enable_lcd_clocks(int enable); + + static void inline dispc_write_reg(int idx, u32 val) +@@ -907,20 +913,20 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) + + static int get_dss_clocks(void) + { +- dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); ++ dispc.dss_ick = clk_get(&omapdss_device.dev, "ick"); + if (IS_ERR(dispc.dss_ick)) { + dev_err(dispc.fbdev->dev, "can't get ick\n"); + return PTR_ERR(dispc.dss_ick); + } + +- dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); ++ dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck"); + if (IS_ERR(dispc.dss1_fck)) { + dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); + clk_put(dispc.dss_ick); + return PTR_ERR(dispc.dss1_fck); + } + +- dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); ++ dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck"); + if (IS_ERR(dispc.dss_54m_fck)) { + dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); + clk_put(dispc.dss_ick); +@@ -1371,6 +1377,12 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, + int skip_init = 0; + int i; + ++ r = platform_device_register(&omapdss_device); ++ if (r) { ++ dev_err(fbdev->dev, "can't register omapdss device\n"); ++ return r; ++ } ++ + memset(&dispc, 0, sizeof(dispc)); + + dispc.base = ioremap(DISPC_BASE, SZ_1K); +@@ -1508,6 +1520,7 @@ static void omap_dispc_cleanup(void) + free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); + put_dss_clocks(); + iounmap(dispc.base); ++ platform_device_unregister(&omapdss_device); + } + + const struct lcd_ctrl omap2_int_ctrl = { +diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c +index ca51583..b84fb7c 100644 +--- a/drivers/video/omap/hwa742.c ++++ b/drivers/video/omap/hwa742.c +@@ -27,8 +27,8 @@ + #include <linux/clk.h> + + #include <mach/dma.h> +-#include <mach/omapfb.h> + #include <mach/hwa742.h> ++#include "omapfb.h" + + #define HWA742_REV_CODE_REG 0x0 + #define HWA742_CONFIG_REG 0x2 +diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c +index 393712b..7b7690a 100644 +--- a/drivers/video/omap/lcd_2430sdp.c ++++ b/drivers/video/omap/lcd_2430sdp.c +@@ -28,9 +28,10 @@ + #include <linux/i2c/twl4030.h> + + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 + #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 + #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 +diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c +index 1f74399..1d3fd13 100644 +--- a/drivers/video/omap/lcd_ams_delta.c ++++ b/drivers/video/omap/lcd_ams_delta.c +@@ -27,7 +27,8 @@ + + #include <mach/board-ams-delta.h> + #include <mach/hardware.h> +-#include <mach/omapfb.h> ++ ++#include "omapfb.h" + + #define AMS_DELTA_DEFAULT_CONTRAST 112 + +diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c +index 626ae3a..e099ad1 100644 +--- a/drivers/video/omap/lcd_apollon.c ++++ b/drivers/video/omap/lcd_apollon.c +@@ -26,7 +26,8 @@ + + #include <mach/gpio.h> + #include <mach/mux.h> +-#include <mach/omapfb.h> ++ ++#include "omapfb.h" + + /* #define USE_35INCH_LCD 1 */ + +diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c +index 417ae5e..8df6887 100644 +--- a/drivers/video/omap/lcd_h3.c ++++ b/drivers/video/omap/lcd_h3.c +@@ -24,7 +24,7 @@ + #include <linux/i2c/tps65010.h> + + #include <mach/gpio.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + #define MODULE_NAME "omapfb-lcd_h3" + +diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c +index 0c398bd..03a06a9 100644 +--- a/drivers/video/omap/lcd_h4.c ++++ b/drivers/video/omap/lcd_h4.c +@@ -22,7 +22,7 @@ + #include <linux/module.h> + #include <linux/platform_device.h> + +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) + { +diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c +index cdbd8bb..18f1422 100644 +--- a/drivers/video/omap/lcd_inn1510.c ++++ b/drivers/video/omap/lcd_inn1510.c +@@ -24,7 +24,7 @@ + #include <linux/io.h> + + #include <mach/fpga.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int innovator1510_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c +index 268f7f8..9fff86f 100644 +--- a/drivers/video/omap/lcd_inn1610.c ++++ b/drivers/video/omap/lcd_inn1610.c +@@ -23,7 +23,7 @@ + #include <linux/platform_device.h> + + #include <mach/gpio.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + #define MODULE_NAME "omapfb-lcd_h3" + +diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c +index dbfe897..44a43ea 100644 +--- a/drivers/video/omap/lcd_ldp.c ++++ b/drivers/video/omap/lcd_ldp.c +@@ -28,9 +28,10 @@ + + #include <mach/gpio.h> + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) + #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) + +diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c +index 918ee89..62e1975 100644 +--- a/drivers/video/omap/lcd_mipid.c ++++ b/drivers/video/omap/lcd_mipid.c +@@ -23,9 +23,10 @@ + #include <linux/workqueue.h> + #include <linux/spi/spi.h> + +-#include <mach/omapfb.h> + #include <mach/lcd_mipid.h> + ++#include "omapfb.h" ++ + #define MIPID_MODULE_NAME "lcd_mipid" + + #define MIPID_CMD_READ_DISP_ID 0x04 +diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c +index 7a2bbe2..c3be87c 100644 +--- a/drivers/video/omap/lcd_omap2evm.c ++++ b/drivers/video/omap/lcd_omap2evm.c +@@ -27,9 +27,10 @@ + #include <linux/i2c/twl4030.h> + + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define LCD_PANEL_ENABLE_GPIO 154 + #define LCD_PANEL_LR 128 + #define LCD_PANEL_UD 129 +diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c +index 4011910..0608a25 100644 +--- a/drivers/video/omap/lcd_omap3beagle.c ++++ b/drivers/video/omap/lcd_omap3beagle.c +@@ -26,9 +26,10 @@ + #include <linux/i2c/twl4030.h> + + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define LCD_PANEL_ENABLE_GPIO 170 + + static int omap3beagle_panel_init(struct lcd_panel *panel, +diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c +index b6a4c2c..c204afb 100644 +--- a/drivers/video/omap/lcd_omap3evm.c ++++ b/drivers/video/omap/lcd_omap3evm.c +@@ -26,9 +26,10 @@ + #include <linux/i2c/twl4030.h> + + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define LCD_PANEL_ENABLE_GPIO 153 + #define LCD_PANEL_LR 2 + #define LCD_PANEL_UD 3 +diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c +index b3fa88b..5755b5c 100644 +--- a/drivers/video/omap/lcd_osk.c ++++ b/drivers/video/omap/lcd_osk.c +@@ -25,7 +25,7 @@ + + #include <mach/gpio.h> + #include <mach/mux.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) + { +diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c +index 2bc5c92..63ebb1f 100644 +--- a/drivers/video/omap/lcd_overo.c ++++ b/drivers/video/omap/lcd_overo.c +@@ -25,9 +25,10 @@ + + #include <mach/gpio.h> + #include <mach/mux.h> +-#include <mach/omapfb.h> + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #define LCD_ENABLE 144 + + static int overo_panel_init(struct lcd_panel *panel, +diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c +index 4bf3c79..7e11a75 100644 +--- a/drivers/video/omap/lcd_palmte.c ++++ b/drivers/video/omap/lcd_palmte.c +@@ -24,7 +24,7 @@ + #include <linux/io.h> + + #include <mach/fpga.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int palmte_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c +index 48ea1f9..ff0e6d7 100644 +--- a/drivers/video/omap/lcd_palmtt.c ++++ b/drivers/video/omap/lcd_palmtt.c +@@ -30,7 +30,7 @@ GPIO13 - screen blanking + #include <linux/io.h> + + #include <mach/gpio.h> +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int palmtt_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c +index 0697d29..2334e56 100644 +--- a/drivers/video/omap/lcd_palmz71.c ++++ b/drivers/video/omap/lcd_palmz71.c +@@ -24,7 +24,7 @@ + #include <linux/platform_device.h> + #include <linux/io.h> + +-#include <mach/omapfb.h> ++#include "omapfb.h" + + static int palmz71_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c +index ab39492..520ed97 100644 +--- a/drivers/video/omap/lcdc.c ++++ b/drivers/video/omap/lcdc.c +@@ -30,10 +30,11 @@ + #include <linux/clk.h> + + #include <mach/dma.h> +-#include <mach/omapfb.h> + + #include <asm/mach-types.h> + ++#include "omapfb.h" ++ + #include "lcdc.h" + + #define MODULE_NAME "lcdc" +diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h +new file mode 100644 +index 0000000..46e4714 +--- /dev/null ++++ b/drivers/video/omap/omapfb.h +@@ -0,0 +1,227 @@ ++/* ++ * File: drivers/video/omap/omapfb.h ++ * ++ * Framebuffer driver for TI OMAP boards ++ * ++ * Copyright (C) 2004 Nokia Corporation ++ * Author: Imre Deak <imre.deak@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __OMAPFB_H ++#define __OMAPFB_H ++ ++#include <linux/fb.h> ++#include <linux/mutex.h> ++#include <linux/omapfb.h> ++ ++#define OMAPFB_EVENT_READY 1 ++#define OMAPFB_EVENT_DISABLED 2 ++ ++#define OMAP_LCDC_INV_VSYNC 0x0001 ++#define OMAP_LCDC_INV_HSYNC 0x0002 ++#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 ++#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 ++#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 ++#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 ++ ++#define OMAP_LCDC_SIGNAL_MASK 0x003f ++ ++#define OMAP_LCDC_PANEL_TFT 0x0100 ++ ++#define OMAPFB_PLANE_XRES_MIN 8 ++#define OMAPFB_PLANE_YRES_MIN 8 ++ ++struct omapfb_device; ++ ++struct lcd_panel { ++ const char *name; ++ int config; /* TFT/STN, signal inversion */ ++ int bpp; /* Pixel format in fb mem */ ++ int data_lines; /* Lines on LCD HW interface */ ++ ++ int x_res, y_res; ++ int pixel_clock; /* In kHz */ ++ int hsw; /* Horizontal synchronization ++ pulse width */ ++ int hfp; /* Horizontal front porch */ ++ int hbp; /* Horizontal back porch */ ++ int vsw; /* Vertical synchronization ++ pulse width */ ++ int vfp; /* Vertical front porch */ ++ int vbp; /* Vertical back porch */ ++ int acb; /* ac-bias pin frequency */ ++ int pcd; /* pixel clock divider. ++ Obsolete use pixel_clock instead */ ++ ++ int (*init) (struct lcd_panel *panel, ++ struct omapfb_device *fbdev); ++ void (*cleanup) (struct lcd_panel *panel); ++ int (*enable) (struct lcd_panel *panel); ++ void (*disable) (struct lcd_panel *panel); ++ unsigned long (*get_caps) (struct lcd_panel *panel); ++ int (*set_bklight_level)(struct lcd_panel *panel, ++ unsigned int level); ++ unsigned int (*get_bklight_level)(struct lcd_panel *panel); ++ unsigned int (*get_bklight_max) (struct lcd_panel *panel); ++ int (*run_test) (struct lcd_panel *panel, int test_num); ++}; ++ ++struct extif_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by extif->convert_timings */ ++ ++ int converted; ++}; ++ ++struct lcd_ctrl_extif { ++ int (*init) (struct omapfb_device *fbdev); ++ void (*cleanup) (void); ++ void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); ++ unsigned long (*get_max_tx_rate)(void); ++ int (*convert_timings) (struct extif_timings *timings); ++ void (*set_timings) (const struct extif_timings *timings); ++ void (*set_bits_per_cycle)(int bpc); ++ void (*write_command) (const void *buf, unsigned int len); ++ void (*read_data) (void *buf, unsigned int len); ++ void (*write_data) (const void *buf, unsigned int len); ++ void (*transfer_area) (int width, int height, ++ void (callback)(void *data), void *data); ++ int (*setup_tearsync) (unsigned pin_cnt, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int div); ++ int (*enable_tearsync) (int enable, unsigned line); ++ ++ unsigned long max_transmit_size; ++}; ++ ++struct omapfb_notifier_block { ++ struct notifier_block nb; ++ void *data; ++ int plane_idx; ++}; ++ ++typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, ++ unsigned long event, ++ void *fbi); ++ ++struct lcd_ctrl { ++ const char *name; ++ void *data; ++ ++ int (*init) (struct omapfb_device *fbdev, ++ int ext_mode, ++ struct omapfb_mem_desc *req_md); ++ void (*cleanup) (void); ++ void (*bind_client) (struct omapfb_notifier_block *nb); ++ void (*get_caps) (int plane, struct omapfb_caps *caps); ++ int (*set_update_mode)(enum omapfb_update_mode mode); ++ enum omapfb_update_mode (*get_update_mode)(void); ++ int (*setup_plane) (int plane, int channel_out, ++ unsigned long offset, ++ int screen_width, ++ int pos_x, int pos_y, int width, ++ int height, int color_mode); ++ int (*set_rotate) (int angle); ++ int (*setup_mem) (int plane, size_t size, ++ int mem_type, unsigned long *paddr); ++ int (*mmap) (struct fb_info *info, ++ struct vm_area_struct *vma); ++ int (*set_scale) (int plane, ++ int orig_width, int orig_height, ++ int out_width, int out_height); ++ int (*enable_plane) (int plane, int enable); ++ int (*update_window) (struct fb_info *fbi, ++ struct omapfb_update_window *win, ++ void (*callback)(void *), ++ void *callback_data); ++ void (*sync) (void); ++ void (*suspend) (void); ++ void (*resume) (void); ++ int (*run_test) (int test_num); ++ int (*setcolreg) (u_int regno, u16 red, u16 green, ++ u16 blue, u16 transp, ++ int update_hw_mem); ++ int (*set_color_key) (struct omapfb_color_key *ck); ++ int (*get_color_key) (struct omapfb_color_key *ck); ++}; ++ ++enum omapfb_state { ++ OMAPFB_DISABLED = 0, ++ OMAPFB_SUSPENDED = 99, ++ OMAPFB_ACTIVE = 100 ++}; ++ ++struct omapfb_plane_struct { ++ int idx; ++ struct omapfb_plane_info info; ++ enum omapfb_color_format color_mode; ++ struct omapfb_device *fbdev; ++}; ++ ++struct omapfb_device { ++ int state; ++ int ext_lcdc; /* Using external ++ LCD controller */ ++ struct mutex rqueue_mutex; ++ ++ int palette_size; ++ u32 pseudo_palette[17]; ++ ++ struct lcd_panel *panel; /* LCD panel */ ++ const struct lcd_ctrl *ctrl; /* LCD controller */ ++ const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ ++ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external ++ interface */ ++ struct device *dev; ++ struct fb_var_screeninfo new_var; /* for mode changes */ ++ ++ struct omapfb_mem_desc mem_desc; ++ struct fb_info *fb_info[OMAPFB_PLANE_NUM]; ++}; ++ ++#ifdef CONFIG_ARCH_OMAP1 ++extern struct lcd_ctrl omap1_lcd_ctrl; ++#else ++extern struct lcd_ctrl omap2_disp_ctrl; ++#endif ++ ++extern void omapfb_register_panel(struct lcd_panel *panel); ++extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); ++extern void omapfb_notify_clients(struct omapfb_device *fbdev, ++ unsigned long event); ++extern int omapfb_register_client(struct omapfb_notifier_block *nb, ++ omapfb_notifier_callback_t callback, ++ void *callback_data); ++extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); ++extern int omapfb_update_window_async(struct fb_info *fbi, ++ struct omapfb_update_window *win, ++ void (*callback)(void *), ++ void *callback_data); ++ ++#endif /* __OMAPFB_H */ +diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c +index 0d0c8c8..a27614d 100644 +--- a/drivers/video/omap/omapfb_main.c ++++ b/drivers/video/omap/omapfb_main.c +@@ -29,8 +29,8 @@ + #include <linux/uaccess.h> + + #include <mach/dma.h> +-#include <mach/omapfb.h> + ++#include "omapfb.h" + #include "lcdc.h" + #include "dispc.h" + +diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c +index ee01e84..fed7b1b 100644 +--- a/drivers/video/omap/rfbi.c ++++ b/drivers/video/omap/rfbi.c +@@ -27,8 +27,7 @@ + #include <linux/clk.h> + #include <linux/io.h> + +-#include <mach/omapfb.h> +- ++#include "omapfb.h" + #include "dispc.h" + + /* To work around an RFBI transfer rate limitation */ +diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c +index a769462..6853627 100644 +--- a/drivers/video/omap/sossi.c ++++ b/drivers/video/omap/sossi.c +@@ -25,8 +25,8 @@ + #include <linux/io.h> + + #include <mach/dma.h> +-#include <mach/omapfb.h> + ++#include "omapfb.h" + #include "lcdc.h" + + #define MODULE_NAME "omapfb-sossi" +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +new file mode 100644 +index 0000000..d877c36 +--- /dev/null ++++ b/drivers/video/omap2/Kconfig +@@ -0,0 +1,9 @@ ++config OMAP2_VRAM ++ bool ++ ++config OMAP2_VRFB ++ bool ++ ++source "drivers/video/omap2/dss/Kconfig" ++source "drivers/video/omap2/omapfb/Kconfig" ++source "drivers/video/omap2/displays/Kconfig" +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +new file mode 100644 +index 0000000..d853d05 +--- /dev/null ++++ b/drivers/video/omap2/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_OMAP2_VRAM) += vram.o ++obj-$(CONFIG_OMAP2_VRFB) += vrfb.o ++ ++obj-y += dss/ ++obj-y += omapfb/ ++obj-y += displays/ +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +new file mode 100644 +index 0000000..79d2861 +--- /dev/null ++++ b/drivers/video/omap2/displays/Kconfig +@@ -0,0 +1,28 @@ ++menu "OMAP2/3 Display Device Drivers" ++ depends on OMAP2_DSS ++ ++config PANEL_GENERIC ++ tristate "Generic Panel" ++ help ++ Generic panel driver. ++ Used for DVI output for Beagle and OMAP3 SDP. ++ ++config PANEL_SAMSUNG_LTE430WQ_F0C ++ tristate "Samsung LTE430WQ-F0C LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used on Overo Palo43 ++ ++config PANEL_SHARP_LS037V7DW01 ++ tristate "Sharp LS037V7DW01 LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used in TI's SDP3430 and EVM boards ++ ++config PANEL_TAAL ++ tristate "Taal DSI Panel" ++ depends on OMAP2_DSS_DSI ++ help ++ Taal DSI command mode panel from TPO. ++ ++endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +new file mode 100644 +index 0000000..d44e765 +--- /dev/null ++++ b/drivers/video/omap2/displays/Makefile +@@ -0,0 +1,5 @@ ++obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o ++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o ++obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o ++ ++obj-$(CONFIG_PANEL_TAAL) += panel-taal.o +diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c +new file mode 100644 +index 0000000..738147e +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-generic.c +@@ -0,0 +1,104 @@ ++/* ++ * Generic panel support ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++static struct omap_video_timings generic_panel_timings = { ++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ ++ .x_res = 640, ++ .y_res = 480, ++ .pixel_clock = 23500, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 7, ++}; ++ ++static int generic_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT; ++ dssdev->panel.timings = generic_panel_timings; ++ ++ return 0; ++} ++ ++static void generic_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int generic_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void generic_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++} ++ ++static int generic_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ generic_panel_disable(dssdev); ++ return 0; ++} ++ ++static int generic_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return generic_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver generic_driver = { ++ .probe = generic_panel_probe, ++ .remove = generic_panel_remove, ++ ++ .enable = generic_panel_enable, ++ .disable = generic_panel_disable, ++ .suspend = generic_panel_suspend, ++ .resume = generic_panel_resume, ++ ++ .driver = { ++ .name = "generic_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init generic_panel_drv_init(void) ++{ ++ return omap_dss_register_driver(&generic_driver); ++} ++ ++static void __exit generic_panel_drv_exit(void) ++{ ++ omap_dss_unregister_driver(&generic_driver); ++} ++ ++module_init(generic_panel_drv_init); ++module_exit(generic_panel_drv_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c +new file mode 100644 +index 0000000..eafe581 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c +@@ -0,0 +1,113 @@ ++/* ++ * LCD panel driver for Samsung LTE430WQ-F0C ++ * ++ * Author: Steve Sakoman <steve@sakoman.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++static struct omap_video_timings samsung_lte_timings = { ++ .x_res = 480, ++ .y_res = 272, ++ ++ .pixel_clock = 9200, ++ ++ .hsw = 41, ++ .hfp = 8, ++ .hbp = 45-41, ++ ++ .vsw = 10, ++ .vfp = 4, ++ .vbp = 12-10, ++}; ++ ++static int samsung_lte_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS; ++ dssdev->panel.timings = samsung_lte_timings; ++ ++ return 0; ++} ++ ++static void samsung_lte_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int samsung_lte_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void samsung_lte_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ ++ msleep(100); ++} ++ ++static int samsung_lte_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ samsung_lte_panel_disable(dssdev); ++ return 0; ++} ++ ++static int samsung_lte_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return samsung_lte_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver samsung_lte_driver = { ++ .probe = samsung_lte_panel_probe, ++ .remove = samsung_lte_panel_remove, ++ ++ .enable = samsung_lte_panel_enable, ++ .disable = samsung_lte_panel_disable, ++ .suspend = samsung_lte_panel_suspend, ++ .resume = samsung_lte_panel_resume, ++ ++ .driver = { ++ .name = "samsung_lte_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init samsung_lte_panel_drv_init(void) ++{ ++ return omap_dss_register_driver(&samsung_lte_driver); ++} ++ ++static void __exit samsung_lte_panel_drv_exit(void) ++{ ++ omap_dss_unregister_driver(&samsung_lte_driver); ++} ++ ++module_init(samsung_lte_panel_drv_init); ++module_exit(samsung_lte_panel_drv_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +new file mode 100644 +index 0000000..2f8f0df +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +@@ -0,0 +1,153 @@ ++/* ++ * LCD panel driver for Sharp LS037V7DW01 ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/device.h> ++#include <linux/regulator/consumer.h> ++#include <linux/err.h> ++ ++#include <mach/display.h> ++ ++struct sharp_data { ++ /* XXX This regulator should actually be in SDP board file, not here, ++ * as it doesn't actually power the LCD, but something else that ++ * affects the output to LCD (I think. Somebody clarify). It doesn't do ++ * harm here, as SDP is the only board using this currently */ ++ struct regulator *vdvi_reg; ++}; ++ ++static struct omap_video_timings sharp_ls_timings = { ++ .x_res = 480, ++ .y_res = 640, ++ ++ .pixel_clock = 19200, ++ ++ .hsw = 2, ++ .hfp = 1, ++ .hbp = 28, ++ ++ .vsw = 1, ++ .vfp = 1, ++ .vbp = 1, ++}; ++ ++static int sharp_ls_panel_probe(struct omap_dss_device *dssdev) ++{ ++ struct sharp_data *sd; ++ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS; ++ dssdev->panel.acb = 0x28; ++ dssdev->panel.timings = sharp_ls_timings; ++ ++ sd = kzalloc(sizeof(*sd), GFP_KERNEL); ++ if (!sd) ++ return -ENOMEM; ++ ++ dev_set_drvdata(&dssdev->dev, sd); ++ ++ sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi"); ++ if (IS_ERR(sd->vdvi_reg)) { ++ kfree(sd); ++ pr_err("failed to get VDVI regulator\n"); ++ return PTR_ERR(sd->vdvi_reg); ++ } ++ ++ return 0; ++} ++ ++static void sharp_ls_panel_remove(struct omap_dss_device *dssdev) ++{ ++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); ++ ++ regulator_put(sd->vdvi_reg); ++ ++ kfree(sd); ++} ++ ++static int sharp_ls_panel_enable(struct omap_dss_device *dssdev) ++{ ++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); ++ int r = 0; ++ ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ regulator_enable(sd->vdvi_reg); ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void sharp_ls_panel_disable(struct omap_dss_device *dssdev) ++{ ++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); ++ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ regulator_disable(sd->vdvi_reg); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ ++ msleep(100); ++} ++ ++static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ sharp_ls_panel_disable(dssdev); ++ return 0; ++} ++ ++static int sharp_ls_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return sharp_ls_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver sharp_ls_driver = { ++ .probe = sharp_ls_panel_probe, ++ .remove = sharp_ls_panel_remove, ++ ++ .enable = sharp_ls_panel_enable, ++ .disable = sharp_ls_panel_disable, ++ .suspend = sharp_ls_panel_suspend, ++ .resume = sharp_ls_panel_resume, ++ ++ .driver = { ++ .name = "sharp_ls_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init sharp_ls_panel_drv_init(void) ++{ ++ return omap_dss_register_driver(&sharp_ls_driver); ++} ++ ++static void __exit sharp_ls_panel_drv_exit(void) ++{ ++ omap_dss_unregister_driver(&sharp_ls_driver); ++} ++ ++module_init(sharp_ls_panel_drv_init); ++module_exit(sharp_ls_panel_drv_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c +new file mode 100644 +index 0000000..84f0d47 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-taal.c +@@ -0,0 +1,900 @@ ++/* ++ * Taal DSI command mode panel ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++/*#define DEBUG*/ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++#include <linux/jiffies.h> ++#include <linux/sched.h> ++#include <linux/backlight.h> ++#include <linux/fb.h> ++#include <linux/interrupt.h> ++#include <linux/gpio.h> ++#include <linux/completion.h> ++ ++#include <mach/display.h> ++ ++/* DSI Virtual channel. Hardcoded for now. */ ++#define TCH 0 ++ ++#define DCS_READ_NUM_ERRORS 0x05 ++#define DCS_READ_POWER_MODE 0x0a ++#define DCS_READ_MADCTL 0x0b ++#define DCS_READ_PIXEL_FORMAT 0x0c ++#define DCS_SLEEP_IN 0x10 ++#define DCS_SLEEP_OUT 0x11 ++#define DCS_DISPLAY_OFF 0x28 ++#define DCS_DISPLAY_ON 0x29 ++#define DCS_COLUMN_ADDR 0x2a ++#define DCS_PAGE_ADDR 0x2b ++#define DCS_MEMORY_WRITE 0x2c ++#define DCS_TEAR_OFF 0x34 ++#define DCS_TEAR_ON 0x35 ++#define DCS_MEM_ACC_CTRL 0x36 ++#define DCS_PIXEL_FORMAT 0x3a ++#define DCS_BRIGHTNESS 0x51 ++#define DCS_CTRL_DISPLAY 0x53 ++#define DCS_WRITE_CABC 0x55 ++#define DCS_READ_CABC 0x56 ++#define DCS_GET_ID1 0xda ++#define DCS_GET_ID2 0xdb ++#define DCS_GET_ID3 0xdc ++ ++struct taal_data { ++ struct backlight_device *bldev; ++ ++ unsigned long hw_guard_end; /* next value of jiffies when we can ++ * issue the next sleep in/out command ++ */ ++ unsigned long hw_guard_wait; /* max guard time in jiffies */ ++ ++ struct omap_dss_device *dssdev; ++ ++ bool enabled; ++ u8 rotate; ++ bool mirror; ++ ++ bool te_enabled; ++ bool use_ext_te; ++ struct completion te_completion; ++ ++ bool use_dsi_bl; ++ ++ bool cabc_broken; ++ unsigned cabc_mode; ++ ++ bool intro_printed; ++}; ++ ++static void hw_guard_start(struct taal_data *td, int guard_msec) ++{ ++ td->hw_guard_wait = msecs_to_jiffies(guard_msec); ++ td->hw_guard_end = jiffies + td->hw_guard_wait; ++} ++ ++static void hw_guard_wait(struct taal_data *td) ++{ ++ unsigned long wait = td->hw_guard_end - jiffies; ++ ++ if ((long)wait > 0 && wait <= td->hw_guard_wait) { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(wait); ++ } ++} ++ ++static int taal_dcs_read_1(u8 dcs_cmd, u8 *data) ++{ ++ int r; ++ u8 buf[1]; ++ ++ r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1); ++ ++ if (r < 0) ++ return r; ++ ++ *data = buf[0]; ++ ++ return 0; ++} ++ ++static int taal_dcs_write_0(u8 dcs_cmd) ++{ ++ return dsi_vc_dcs_write(TCH, &dcs_cmd, 1); ++} ++ ++static int taal_dcs_write_1(u8 dcs_cmd, u8 param) ++{ ++ u8 buf[2]; ++ buf[0] = dcs_cmd; ++ buf[1] = param; ++ return dsi_vc_dcs_write(TCH, buf, 2); ++} ++ ++static int taal_sleep_in(struct taal_data *td) ++ ++{ ++ u8 cmd; ++ int r; ++ ++ hw_guard_wait(td); ++ ++ cmd = DCS_SLEEP_IN; ++ r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1); ++ if (r) ++ return r; ++ ++ hw_guard_start(td, 120); ++ ++ msleep(5); ++ ++ return 0; ++} ++ ++static int taal_sleep_out(struct taal_data *td) ++{ ++ int r; ++ ++ hw_guard_wait(td); ++ ++ r = taal_dcs_write_0(DCS_SLEEP_OUT); ++ if (r) ++ return r; ++ ++ hw_guard_start(td, 120); ++ ++ msleep(5); ++ ++ return 0; ++} ++ ++static int taal_get_id(u8 *id1, u8 *id2, u8 *id3) ++{ ++ int r; ++ ++ r = taal_dcs_read_1(DCS_GET_ID1, id1); ++ if (r) ++ return r; ++ r = taal_dcs_read_1(DCS_GET_ID2, id2); ++ if (r) ++ return r; ++ r = taal_dcs_read_1(DCS_GET_ID3, id3); ++ if (r) ++ return r; ++ ++ return 0; ++} ++ ++static int taal_set_addr_mode(u8 rotate, bool mirror) ++{ ++ int r; ++ u8 mode; ++ int b5, b6, b7; ++ ++ r = taal_dcs_read_1(DCS_READ_MADCTL, &mode); ++ if (r) ++ return r; ++ ++ switch (rotate) { ++ default: ++ case 0: ++ b7 = 0; ++ b6 = 0; ++ b5 = 0; ++ break; ++ case 1: ++ b7 = 0; ++ b6 = 1; ++ b5 = 1; ++ break; ++ case 2: ++ b7 = 1; ++ b6 = 1; ++ b5 = 0; ++ break; ++ case 3: ++ b7 = 1; ++ b6 = 0; ++ b5 = 1; ++ break; ++ } ++ ++ if (mirror) ++ b6 = !b6; ++ ++ mode &= ~((1<<7) | (1<<6) | (1<<5)); ++ mode |= (b7 << 7) | (b6 << 6) | (b5 << 5); ++ ++ return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode); ++} ++ ++static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h) ++{ ++ int r; ++ u16 x1 = x; ++ u16 x2 = x + w - 1; ++ u16 y1 = y; ++ u16 y2 = y + h - 1; ++ ++ u8 buf[5]; ++ buf[0] = DCS_COLUMN_ADDR; ++ buf[1] = (x1 >> 8) & 0xff; ++ buf[2] = (x1 >> 0) & 0xff; ++ buf[3] = (x2 >> 8) & 0xff; ++ buf[4] = (x2 >> 0) & 0xff; ++ ++ r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); ++ if (r) ++ return r; ++ ++ buf[0] = DCS_PAGE_ADDR; ++ buf[1] = (y1 >> 8) & 0xff; ++ buf[2] = (y1 >> 0) & 0xff; ++ buf[3] = (y2 >> 8) & 0xff; ++ buf[4] = (y2 >> 0) & 0xff; ++ ++ r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); ++ if (r) ++ return r; ++ ++ dsi_vc_send_bta_sync(TCH); ++ ++ return r; ++} ++ ++static int taal_bl_update_status(struct backlight_device *dev) ++{ ++ struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev); ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ int r; ++ int level; ++ ++ if (dev->props.fb_blank == FB_BLANK_UNBLANK && ++ dev->props.power == FB_BLANK_UNBLANK) ++ level = dev->props.brightness; ++ else ++ level = 0; ++ ++ dev_dbg(&dssdev->dev, "update brightness to %d\n", level); ++ ++ if (td->use_dsi_bl) { ++ if (td->enabled) { ++ dsi_bus_lock(); ++ r = taal_dcs_write_1(DCS_BRIGHTNESS, level); ++ dsi_bus_unlock(); ++ if (r) ++ return r; ++ } ++ } else { ++ if (!dssdev->set_backlight) ++ return -EINVAL; ++ ++ r = dssdev->set_backlight(dssdev, level); ++ if (r) ++ return r; ++ } ++ ++ return 0; ++} ++ ++static int taal_bl_get_intensity(struct backlight_device *dev) ++{ ++ if (dev->props.fb_blank == FB_BLANK_UNBLANK && ++ dev->props.power == FB_BLANK_UNBLANK) ++ return dev->props.brightness; ++ ++ return 0; ++} ++ ++static struct backlight_ops taal_bl_ops = { ++ .get_brightness = taal_bl_get_intensity, ++ .update_status = taal_bl_update_status, ++}; ++ ++static void taal_get_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ *timings = dssdev->panel.timings; ++} ++ ++static void taal_get_resolution(struct omap_dss_device *dssdev, ++ u16 *xres, u16 *yres) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ ++ if (td->rotate == 0 || td->rotate == 2) { ++ *xres = dssdev->panel.timings.x_res; ++ *yres = dssdev->panel.timings.y_res; ++ } else { ++ *yres = dssdev->panel.timings.x_res; ++ *xres = dssdev->panel.timings.y_res; ++ } ++} ++ ++static irqreturn_t taal_te_isr(int irq, void *data) ++{ ++ struct omap_dss_device *dssdev = data; ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ ++ complete_all(&td->te_completion); ++ ++ return IRQ_HANDLED; ++} ++ ++static ssize_t taal_num_errors_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ u8 errors; ++ int r; ++ ++ if (td->enabled) { ++ dsi_bus_lock(); ++ r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors); ++ dsi_bus_unlock(); ++ } else { ++ r = -ENODEV; ++ } ++ ++ if (r) ++ return r; ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", errors); ++} ++ ++static ssize_t taal_hw_revision_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ u8 id1, id2, id3; ++ int r; ++ ++ if (td->enabled) { ++ dsi_bus_lock(); ++ r = taal_get_id(&id1, &id2, &id3); ++ dsi_bus_unlock(); ++ } else { ++ r = -ENODEV; ++ } ++ ++ if (r) ++ return r; ++ ++ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); ++} ++ ++static const char *cabc_modes[] = { ++ "off", /* used also always when CABC is not supported */ ++ "ui", ++ "still-image", ++ "moving-image", ++}; ++ ++static ssize_t show_cabc_mode(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ const char *mode_str; ++ int mode; ++ int len; ++ ++ mode = td->cabc_mode; ++ ++ mode_str = "unknown"; ++ if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes)) ++ mode_str = cabc_modes[mode]; ++ len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str); ++ ++ return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1; ++} ++ ++static ssize_t store_cabc_mode(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) { ++ if (sysfs_streq(cabc_modes[i], buf)) ++ break; ++ } ++ ++ if (i == ARRAY_SIZE(cabc_modes)) ++ return -EINVAL; ++ ++ if (td->enabled) { ++ dsi_bus_lock(); ++ if (!td->cabc_broken) ++ taal_dcs_write_1(DCS_WRITE_CABC, i); ++ dsi_bus_unlock(); ++ } ++ ++ td->cabc_mode = i; ++ ++ return count; ++} ++ ++static ssize_t show_cabc_available_modes(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ int len; ++ int i; ++ ++ for (i = 0, len = 0; ++ len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++) ++ len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s", ++ i ? " " : "", cabc_modes[i], ++ i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : ""); ++ ++ return len < PAGE_SIZE ? len : PAGE_SIZE - 1; ++} ++ ++static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL); ++static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL); ++static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR, ++ show_cabc_mode, store_cabc_mode); ++static DEVICE_ATTR(cabc_available_modes, S_IRUGO, ++ show_cabc_available_modes, NULL); ++ ++static struct attribute *taal_attrs[] = { ++ &dev_attr_num_dsi_errors.attr, ++ &dev_attr_hw_revision.attr, ++ &dev_attr_cabc_mode.attr, ++ &dev_attr_cabc_available_modes.attr, ++ NULL, ++}; ++ ++static struct attribute_group taal_attr_group = { ++ .attrs = taal_attrs, ++}; ++ ++static int taal_probe(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td; ++ struct backlight_device *bldev; ++ int r; ++ ++ const struct omap_video_timings taal_panel_timings = { ++ .x_res = 864, ++ .y_res = 480, ++ }; ++ ++ dev_dbg(&dssdev->dev, "probe\n"); ++ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT; ++ dssdev->panel.timings = taal_panel_timings; ++ dssdev->ctrl.pixel_size = 24; ++ ++ td = kzalloc(sizeof(*td), GFP_KERNEL); ++ if (!td) { ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ dev_set_drvdata(&dssdev->dev, td); ++ ++ dssdev->get_timings = taal_get_timings; ++ dssdev->get_resolution = taal_get_resolution; ++ ++ /* if no platform set_backlight() defined, presume DSI backlight ++ * control */ ++ if (!dssdev->set_backlight) ++ td->use_dsi_bl = true; ++ ++ bldev = backlight_device_register("taal", &dssdev->dev, dssdev, ++ &taal_bl_ops); ++ if (IS_ERR(bldev)) { ++ r = PTR_ERR(bldev); ++ goto err1; ++ } ++ ++ td->bldev = bldev; ++ ++ bldev->props.fb_blank = FB_BLANK_UNBLANK; ++ bldev->props.power = FB_BLANK_UNBLANK; ++ if (td->use_dsi_bl) { ++ bldev->props.max_brightness = 255; ++ bldev->props.brightness = 255; ++ } else { ++ bldev->props.max_brightness = 127; ++ bldev->props.brightness = 127; ++ } ++ ++ taal_bl_update_status(bldev); ++ ++ if (dssdev->phy.dsi.ext_te) { ++ int gpio = dssdev->phy.dsi.ext_te_gpio; ++ ++ r = gpio_request(gpio, "taal irq"); ++ if (r) { ++ dev_err(&dssdev->dev, "GPIO request failed\n"); ++ goto err2; ++ } ++ ++ gpio_direction_input(gpio); ++ ++ r = request_irq(gpio_to_irq(gpio), taal_te_isr, ++ IRQF_DISABLED | IRQF_TRIGGER_RISING, ++ "taal vsync", dssdev); ++ ++ if (r) { ++ dev_err(&dssdev->dev, "IRQ request failed\n"); ++ gpio_free(gpio); ++ goto err2; ++ } ++ ++ init_completion(&td->te_completion); ++ ++ td->use_ext_te = true; ++ } ++ ++ r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group); ++ if (r) { ++ dev_err(&dssdev->dev, "failed to create sysfs files\n"); ++ goto err3; ++ } ++ ++ return 0; ++err3: ++ if (td->use_ext_te) { ++ int gpio = dssdev->phy.dsi.ext_te_gpio; ++ free_irq(gpio_to_irq(gpio), dssdev); ++ gpio_free(gpio); ++ } ++err2: ++ backlight_device_unregister(bldev); ++err1: ++ kfree(td); ++err0: ++ return r; ++} ++ ++static void taal_remove(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ struct backlight_device *bldev; ++ ++ dev_dbg(&dssdev->dev, "remove\n"); ++ ++ sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group); ++ ++ if (td->use_ext_te) { ++ int gpio = dssdev->phy.dsi.ext_te_gpio; ++ free_irq(gpio_to_irq(gpio), dssdev); ++ gpio_free(gpio); ++ } ++ ++ bldev = td->bldev; ++ bldev->props.power = FB_BLANK_POWERDOWN; ++ taal_bl_update_status(bldev); ++ backlight_device_unregister(bldev); ++ ++ kfree(td); ++} ++ ++static int taal_enable(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ u8 id1, id2, id3; ++ int r; ++ ++ dev_dbg(&dssdev->dev, "enable\n"); ++ ++ if (dssdev->platform_enable) { ++ r = dssdev->platform_enable(dssdev); ++ if (r) ++ return r; ++ } ++ ++ /* it seems we have to wait a bit until taal is ready */ ++ msleep(5); ++ ++ r = taal_sleep_out(td); ++ if (r) ++ return r; ++ ++ r = taal_get_id(&id1, &id2, &id3); ++ if (r) ++ return r; ++ ++ /* on early revisions CABC is broken */ ++ if (id2 == 0x00 || id2 == 0xff || id2 == 0x81) ++ td->cabc_broken = true; ++ ++ taal_dcs_write_1(DCS_BRIGHTNESS, 0xff); ++ taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */ ++ ++ taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */ ++ ++ taal_set_addr_mode(td->rotate, td->mirror); ++ if (!td->cabc_broken) ++ taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode); ++ ++ taal_dcs_write_0(DCS_DISPLAY_ON); ++ ++ td->enabled = 1; ++ ++ if (!td->intro_printed) { ++ dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n", ++ id1, id2, id3); ++ if (td->cabc_broken) ++ dev_info(&dssdev->dev, ++ "old Taal version, CABC disabled\n"); ++ td->intro_printed = true; ++ } ++ ++ return 0; ++} ++ ++static void taal_disable(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ ++ dev_dbg(&dssdev->dev, "disable\n"); ++ ++ taal_dcs_write_0(DCS_DISPLAY_OFF); ++ taal_sleep_in(td); ++ ++ /* wait a bit so that the message goes through */ ++ msleep(10); ++ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ td->enabled = 0; ++} ++ ++static int taal_suspend(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ struct backlight_device *bldev = td->bldev; ++ ++ bldev->props.power = FB_BLANK_POWERDOWN; ++ taal_bl_update_status(bldev); ++ ++ return 0; ++} ++ ++static int taal_resume(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ struct backlight_device *bldev = td->bldev; ++ ++ bldev->props.power = FB_BLANK_UNBLANK; ++ taal_bl_update_status(bldev); ++ ++ return 0; ++} ++ ++static void taal_setup_update(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ taal_set_update_window(x, y, w, h); ++} ++ ++static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ int r; ++ ++ td->te_enabled = enable; ++ ++ if (enable) ++ r = taal_dcs_write_1(DCS_TEAR_ON, 0); ++ else ++ r = taal_dcs_write_0(DCS_TEAR_OFF); ++ ++ return r; ++} ++ ++static int taal_wait_te(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ long wait = msecs_to_jiffies(500); ++ ++ if (!td->use_ext_te || !td->te_enabled) ++ return 0; ++ ++ INIT_COMPLETION(td->te_completion); ++ wait = wait_for_completion_timeout(&td->te_completion, wait); ++ if (wait == 0) { ++ dev_err(&dssdev->dev, "timeout waiting TE\n"); ++ return -ETIME; ++ } ++ ++ return 0; ++} ++ ++static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ int r; ++ ++ dev_dbg(&dssdev->dev, "rotate %d\n", rotate); ++ ++ if (td->enabled) { ++ r = taal_set_addr_mode(rotate, td->mirror); ++ ++ if (r) ++ return r; ++ } ++ ++ td->rotate = rotate; ++ ++ return 0; ++} ++ ++static u8 taal_get_rotate(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ return td->rotate; ++} ++ ++static int taal_mirror(struct omap_dss_device *dssdev, bool enable) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ int r; ++ ++ dev_dbg(&dssdev->dev, "mirror %d\n", enable); ++ ++ if (td->enabled) { ++ r = taal_set_addr_mode(td->rotate, enable); ++ ++ if (r) ++ return r; ++ } ++ ++ td->mirror = enable; ++ ++ return 0; ++} ++ ++static bool taal_get_mirror(struct omap_dss_device *dssdev) ++{ ++ struct taal_data *td = dev_get_drvdata(&dssdev->dev); ++ return td->mirror; ++} ++ ++static int taal_run_test(struct omap_dss_device *dssdev, int test_num) ++{ ++ u8 id1, id2, id3; ++ int r; ++ ++ r = taal_dcs_read_1(DCS_GET_ID1, &id1); ++ if (r) ++ return r; ++ r = taal_dcs_read_1(DCS_GET_ID2, &id2); ++ if (r) ++ return r; ++ r = taal_dcs_read_1(DCS_GET_ID3, &id3); ++ if (r) ++ return r; ++ ++ return 0; ++} ++ ++static int taal_memory_read(struct omap_dss_device *dssdev, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int r; ++ int first = 1; ++ int plen; ++ unsigned buf_used = 0; ++ ++ if (size < w * h * 3) ++ return -ENOMEM; ++ ++ size = min(w * h * 3, ++ dssdev->panel.timings.x_res * ++ dssdev->panel.timings.y_res * 3); ++ ++ /* plen 1 or 2 goes into short packet. until checksum error is fixed, ++ * use short packets. plen 32 works, but bigger packets seem to cause ++ * an error. */ ++ if (size % 2) ++ plen = 1; ++ else ++ plen = 2; ++ ++ taal_setup_update(dssdev, x, y, w, h); ++ ++ r = dsi_vc_set_max_rx_packet_size(TCH, plen); ++ if (r) ++ return r; ++ ++ while (buf_used < size) { ++ u8 dcs_cmd = first ? 0x2e : 0x3e; ++ first = 0; ++ ++ r = dsi_vc_dcs_read(TCH, dcs_cmd, ++ buf + buf_used, size - buf_used); ++ ++ if (r < 0) { ++ dev_err(&dssdev->dev, "read error\n"); ++ goto err; ++ } ++ ++ buf_used += r; ++ ++ if (r < plen) { ++ dev_err(&dssdev->dev, "short read\n"); ++ break; ++ } ++ } ++ ++ r = buf_used; ++ ++err: ++ dsi_vc_set_max_rx_packet_size(TCH, 1); ++ ++ return r; ++} ++ ++static struct omap_dss_driver taal_driver = { ++ .probe = taal_probe, ++ .remove = taal_remove, ++ ++ .enable = taal_enable, ++ .disable = taal_disable, ++ .suspend = taal_suspend, ++ .resume = taal_resume, ++ ++ .setup_update = taal_setup_update, ++ .enable_te = taal_enable_te, ++ .wait_for_te = taal_wait_te, ++ .set_rotate = taal_rotate, ++ .get_rotate = taal_get_rotate, ++ .set_mirror = taal_mirror, ++ .get_mirror = taal_get_mirror, ++ .run_test = taal_run_test, ++ .memory_read = taal_memory_read, ++ ++ .driver = { ++ .name = "taal", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init taal_init(void) ++{ ++ omap_dss_register_driver(&taal_driver); ++ ++ return 0; ++} ++ ++static void __exit taal_exit(void) ++{ ++ omap_dss_unregister_driver(&taal_driver); ++} ++ ++module_init(taal_init); ++module_exit(taal_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); ++MODULE_DESCRIPTION("Taal Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig +new file mode 100644 +index 0000000..71d8dec +--- /dev/null ++++ b/drivers/video/omap2/dss/Kconfig +@@ -0,0 +1,89 @@ ++menuconfig OMAP2_DSS ++ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" ++ depends on ARCH_OMAP2 || ARCH_OMAP3 ++ help ++ OMAP2/3 Display Subsystem support. ++ ++if OMAP2_DSS ++ ++config OMAP2_VRAM_SIZE ++ int "VRAM size (MB)" ++ range 0 32 ++ default 0 ++ help ++ The amount of SDRAM to reserve at boot time for video RAM use. ++ This VRAM will be used by omapfb and other drivers that need ++ large continuous RAM area for video use. ++ ++ You can also set this with "vram=<bytes>" kernel argument, or ++ in the board file. ++ ++config OMAP2_DSS_DEBUG_SUPPORT ++ bool "Debug support" ++ default y ++ help ++ This enables debug messages. You need to enable printing ++ with 'debug' module parameter. ++ ++config OMAP2_DSS_RFBI ++ bool "RFBI support" ++ default n ++ help ++ MIPI DBI, or RFBI (Remote Framebuffer Interface), support. ++ ++config OMAP2_DSS_VENC ++ bool "VENC support" ++ default y ++ help ++ OMAP Video Encoder support. ++ ++config OMAP2_DSS_SDI ++ bool "SDI support" ++ depends on ARCH_OMAP3 ++ default n ++ help ++ SDI (Serial Display Interface) support. ++ ++config OMAP2_DSS_DSI ++ bool "DSI support" ++ depends on ARCH_OMAP3 ++ default n ++ help ++ MIPI DSI support. ++ ++config OMAP2_DSS_USE_DSI_PLL ++ bool "Use DSI PLL for PCLK (EXPERIMENTAL)" ++ default n ++ depends on OMAP2_DSS_DSI ++ help ++ Use DSI PLL to generate pixel clock. Currently only for DPI output. ++ DSI PLL can be used to generate higher and more precise pixel clocks. ++ ++config OMAP2_DSS_FAKE_VSYNC ++ bool "Fake VSYNC irq from manual update displays" ++ default n ++ help ++ If this is selected, DSI will generate a fake DISPC VSYNC interrupt ++ when DSI has sent a frame. This is only needed with DSI or RFBI ++ displays using manual mode, and you want VSYNC to, for example, ++ time animation. ++ ++config OMAP2_DSS_MIN_FCK_PER_PCK ++ int "Minimum FCK/PCK ratio (for scaling)" ++ range 0 32 ++ default 0 ++ help ++ This can be used to adjust the minimum FCK/PCK ratio. ++ ++ With this you can make sure that DISPC FCK is at least ++ n x PCK. Video plane scaling requires higher FCK than ++ normally. ++ ++ If this is set to 0, there's no extra constraint on the ++ DISPC FCK. However, the FCK will at minimum be ++ 2xPCK (if active matrix) or 3xPCK (if passive matrix). ++ ++ Max FCK is 173MHz, so this doesn't work if your PCK ++ is very high. ++ ++endif +diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile +new file mode 100644 +index 0000000..980c72c +--- /dev/null ++++ b/drivers/video/omap2/dss/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_OMAP2_DSS) += omapdss.o ++omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o ++omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o ++omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o ++omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o ++omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o +diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c +new file mode 100644 +index 0000000..e8d430c +--- /dev/null ++++ b/drivers/video/omap2/dss/core.c +@@ -0,0 +1,917 @@ ++/* ++ * linux/drivers/video/omap2/dss/core.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "CORE" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/platform_device.h> ++#include <linux/seq_file.h> ++#include <linux/debugfs.h> ++#include <linux/io.h> ++#include <linux/device.h> ++ ++#include <mach/display.h> ++#include <mach/clock.h> ++ ++#include "dss.h" ++ ++static struct { ++ struct platform_device *pdev; ++ int ctx_id; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss2_fck; ++ struct clk *dss_54m_fck; ++ struct clk *dss_96m_fck; ++ unsigned num_clks_enabled; ++} core; ++ ++static void dss_clk_enable_all_no_ctx(void); ++static void dss_clk_disable_all_no_ctx(void); ++static void dss_clk_enable_no_ctx(enum dss_clock clks); ++static void dss_clk_disable_no_ctx(enum dss_clock clks); ++ ++static char *def_disp_name; ++module_param_named(def_disp, def_disp_name, charp, 0); ++MODULE_PARM_DESC(def_disp_name, "default display name"); ++ ++#ifdef DEBUG ++unsigned int dss_debug; ++module_param_named(debug, dss_debug, bool, 0644); ++#endif ++ ++/* CONTEXT */ ++static int dss_get_ctx_id(void) ++{ ++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; ++ int r; ++ ++ if (!pdata->get_last_off_on_transaction_id) ++ return 0; ++ r = pdata->get_last_off_on_transaction_id(&core.pdev->dev); ++ if (r < 0) { ++ dev_err(&core.pdev->dev, "getting transaction ID failed, " ++ "will force context restore\n"); ++ r = -1; ++ } ++ return r; ++} ++ ++int dss_need_ctx_restore(void) ++{ ++ int id = dss_get_ctx_id(); ++ ++ if (id < 0 || id != core.ctx_id) { ++ DSSDBG("ctx id %d -> id %d\n", ++ core.ctx_id, id); ++ core.ctx_id = id; ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ ++static void save_all_ctx(void) ++{ ++ DSSDBG("save context\n"); ++ ++ dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dss_save_context(); ++ dispc_save_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_save_context(); ++#endif ++ ++ dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++static void restore_all_ctx(void) ++{ ++ DSSDBG("restore context\n"); ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ dss_restore_context(); ++ dispc_restore_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_restore_context(); ++#endif ++ ++ dss_clk_disable_all_no_ctx(); ++} ++ ++/* CLOCKS */ ++void dss_dump_clocks(struct seq_file *s) ++{ ++ int i; ++ struct clk *clocks[5] = { ++ core.dss_ick, ++ core.dss1_fck, ++ core.dss2_fck, ++ core.dss_54m_fck, ++ core.dss_96m_fck ++ }; ++ ++ seq_printf(s, "- dss -\n"); ++ ++ seq_printf(s, "internal clk count\t%u\n", core.num_clks_enabled); ++ ++ for (i = 0; i < 5; i++) { ++ if (!clocks[i]) ++ continue; ++ seq_printf(s, "%-15s\t%lu\t%d\n", ++ clocks[i]->name, ++ clk_get_rate(clocks[i]), ++ clocks[i]->usecount); ++ } ++} ++ ++static int dss_get_clock(struct clk **clock, const char *clk_name) ++{ ++ struct clk *clk; ++ ++ clk = clk_get(&core.pdev->dev, clk_name); ++ ++ if (IS_ERR(clk)) { ++ DSSERR("can't get clock %s", clk_name); ++ return PTR_ERR(clk); ++ } ++ ++ *clock = clk; ++ ++ DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk)); ++ ++ return 0; ++} ++ ++static int dss_get_clocks(void) ++{ ++ int r; ++ ++ core.dss_ick = NULL; ++ core.dss1_fck = NULL; ++ core.dss2_fck = NULL; ++ core.dss_54m_fck = NULL; ++ core.dss_96m_fck = NULL; ++ ++ r = dss_get_clock(&core.dss_ick, "ick"); ++ if (r) ++ goto err; ++ ++ r = dss_get_clock(&core.dss1_fck, "dss1_fck"); ++ if (r) ++ goto err; ++ ++ r = dss_get_clock(&core.dss2_fck, "dss2_fck"); ++ if (r) ++ goto err; ++ ++ r = dss_get_clock(&core.dss_54m_fck, "tv_fck"); ++ if (r) ++ goto err; ++ ++ r = dss_get_clock(&core.dss_96m_fck, "video_fck"); ++ if (r) ++ goto err; ++ ++ return 0; ++ ++err: ++ if (core.dss_ick) ++ clk_put(core.dss_ick); ++ if (core.dss1_fck) ++ clk_put(core.dss1_fck); ++ if (core.dss2_fck) ++ clk_put(core.dss2_fck); ++ if (core.dss_54m_fck) ++ clk_put(core.dss_54m_fck); ++ if (core.dss_96m_fck) ++ clk_put(core.dss_96m_fck); ++ ++ return r; ++} ++ ++static void dss_put_clocks(void) ++{ ++ if (core.dss_96m_fck) ++ clk_put(core.dss_96m_fck); ++ clk_put(core.dss_54m_fck); ++ clk_put(core.dss1_fck); ++ clk_put(core.dss2_fck); ++ clk_put(core.dss_ick); ++} ++ ++unsigned long dss_clk_get_rate(enum dss_clock clk) ++{ ++ switch (clk) { ++ case DSS_CLK_ICK: ++ return clk_get_rate(core.dss_ick); ++ case DSS_CLK_FCK1: ++ return clk_get_rate(core.dss1_fck); ++ case DSS_CLK_FCK2: ++ return clk_get_rate(core.dss2_fck); ++ case DSS_CLK_54M: ++ return clk_get_rate(core.dss_54m_fck); ++ case DSS_CLK_96M: ++ return clk_get_rate(core.dss_96m_fck); ++ } ++ ++ BUG(); ++ return 0; ++} ++ ++static unsigned count_clk_bits(enum dss_clock clks) ++{ ++ unsigned num_clks = 0; ++ ++ if (clks & DSS_CLK_ICK) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK1) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK2) ++ ++num_clks; ++ if (clks & DSS_CLK_54M) ++ ++num_clks; ++ if (clks & DSS_CLK_96M) ++ ++num_clks; ++ ++ return num_clks; ++} ++ ++static void dss_clk_enable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_enable(core.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_enable(core.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_enable(core.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_enable(core.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_enable(core.dss_96m_fck); ++ ++ core.num_clks_enabled += num_clks; ++} ++ ++void dss_clk_enable(enum dss_clock clks) ++{ ++ dss_clk_enable_no_ctx(clks); ++ ++ if (cpu_is_omap34xx() && dss_need_ctx_restore()) ++ restore_all_ctx(); ++} ++ ++static void dss_clk_disable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_disable(core.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_disable(core.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_disable(core.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_disable(core.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_disable(core.dss_96m_fck); ++ ++ core.num_clks_enabled -= num_clks; ++} ++ ++void dss_clk_disable(enum dss_clock clks) ++{ ++ if (cpu_is_omap34xx()) { ++ unsigned num_clks = count_clk_bits(clks); ++ ++ BUG_ON(core.num_clks_enabled < num_clks); ++ ++ if (core.num_clks_enabled == num_clks) ++ save_all_ctx(); ++ } ++ ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_enable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_enable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable(clks); ++} ++ ++/* DEBUGFS */ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++static void dss_debug_dump_clocks(struct seq_file *s) ++{ ++ dss_dump_clocks(s); ++ dispc_dump_clocks(s); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_dump_clocks(s); ++#endif ++} ++ ++static int dss_debug_show(struct seq_file *s, void *unused) ++{ ++ void (*func)(struct seq_file *) = s->private; ++ func(s); ++ return 0; ++} ++ ++static int dss_debug_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, dss_debug_show, inode->i_private); ++} ++ ++static const struct file_operations dss_debug_fops = { ++ .open = dss_debug_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static struct dentry *dss_debugfs_dir; ++ ++static int dss_initialize_debugfs(void) ++{ ++ dss_debugfs_dir = debugfs_create_dir("omapdss", NULL); ++ if (IS_ERR(dss_debugfs_dir)) { ++ int err = PTR_ERR(dss_debugfs_dir); ++ dss_debugfs_dir = NULL; ++ return err; ++ } ++ ++ debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir, ++ &dss_debug_dump_clocks, &dss_debug_fops); ++ ++ debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir, ++ &dss_dump_regs, &dss_debug_fops); ++ debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir, ++ &dispc_dump_regs, &dss_debug_fops); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir, ++ &rfbi_dump_regs, &dss_debug_fops); ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir, ++ &dsi_dump_regs, &dss_debug_fops); ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir, ++ &venc_dump_regs, &dss_debug_fops); ++#endif ++ return 0; ++} ++ ++static void dss_uninitialize_debugfs(void) ++{ ++ if (dss_debugfs_dir) ++ debugfs_remove_recursive(dss_debugfs_dir); ++} ++#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */ ++ ++/* PLATFORM DEVICE */ ++static int omap_dss_probe(struct platform_device *pdev) ++{ ++ struct omap_dss_board_info *pdata = pdev->dev.platform_data; ++ int skip_init = 0; ++ int r; ++ int i; ++ ++ core.pdev = pdev; ++ ++ dss_init_overlay_managers(pdev); ++ dss_init_overlays(pdev); ++ ++ r = dss_get_clocks(); ++ if (r) ++ goto fail0; ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ core.ctx_id = dss_get_ctx_id(); ++ DSSDBG("initial ctx id %u\n", core.ctx_id); ++ ++#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT ++ /* DISPC_CONTROL */ ++ if (omap_readl(0x48050440) & 1) /* LCD enabled? */ ++ skip_init = 1; ++#endif ++ ++ r = dss_init(skip_init); ++ if (r) { ++ DSSERR("Failed to initialize DSS\n"); ++ goto fail0; ++ } ++ ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ r = rfbi_init(); ++ if (r) { ++ DSSERR("Failed to initialize rfbi\n"); ++ goto fail0; ++ } ++#endif ++ ++ r = dpi_init(); ++ if (r) { ++ DSSERR("Failed to initialize dpi\n"); ++ goto fail0; ++ } ++ ++ r = dispc_init(); ++ if (r) { ++ DSSERR("Failed to initialize dispc\n"); ++ goto fail0; ++ } ++#ifdef CONFIG_OMAP2_DSS_VENC ++ r = venc_init(pdev); ++ if (r) { ++ DSSERR("Failed to initialize venc\n"); ++ goto fail0; ++ } ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_SDI ++ r = sdi_init(skip_init); ++ if (r) { ++ DSSERR("Failed to initialize SDI\n"); ++ goto fail0; ++ } ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_init(pdev); ++ if (r) { ++ DSSERR("Failed to initialize DSI\n"); ++ goto fail0; ++ } ++#endif ++ } ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++ r = dss_initialize_debugfs(); ++ if (r) ++ goto fail0; ++#endif ++ ++ for (i = 0; i < pdata->num_devices; ++i) { ++ struct omap_dss_device *dssdev = pdata->devices[i]; ++ ++ r = omap_dss_register_device(dssdev); ++ if (r) ++ DSSERR("device reg failed %d\n", i); ++ ++ if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0) ++ pdata->default_device = dssdev; ++ } ++ ++ dss_clk_disable_all(); ++ ++ return 0; ++ ++ /* XXX fail correctly */ ++fail0: ++ return r; ++} ++ ++static int omap_dss_remove(struct platform_device *pdev) ++{ ++ struct omap_dss_board_info *pdata = pdev->dev.platform_data; ++ int i; ++ int c; ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++ dss_uninitialize_debugfs(); ++#endif ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ venc_exit(); ++#endif ++ dispc_exit(); ++ dpi_exit(); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ rfbi_exit(); ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_exit(); ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ sdi_exit(); ++#endif ++ } ++ ++ dss_exit(); ++ ++ /* these should be removed at some point */ ++ c = core.dss_ick->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_ick usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss_ick); ++ } ++ ++ c = core.dss1_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss1_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss1_fck); ++ } ++ ++ c = core.dss2_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss2_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss2_fck); ++ } ++ ++ c = core.dss_54m_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss_54m_fck); ++ } ++ ++ if (core.dss_96m_fck) { ++ c = core.dss_96m_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_96m_fck usecount %d, disabling\n", ++ c); ++ while (c-- > 0) ++ clk_disable(core.dss_96m_fck); ++ } ++ } ++ ++ dss_put_clocks(); ++ ++ dss_uninit_overlays(pdev); ++ dss_uninit_overlay_managers(pdev); ++ ++ for (i = 0; i < pdata->num_devices; ++i) ++ omap_dss_unregister_device(pdata->devices[i]); ++ ++ return 0; ++} ++ ++static void omap_dss_shutdown(struct platform_device *pdev) ++{ ++ DSSDBG("shutdown\n"); ++} ++ ++static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ DSSDBG("suspend %d\n", state.event); ++ ++ return dss_suspend_all_devices(); ++} ++ ++static int omap_dss_resume(struct platform_device *pdev) ++{ ++ DSSDBG("resume\n"); ++ ++ return dss_resume_all_devices(); ++} ++ ++static struct platform_driver omap_dss_driver = { ++ .probe = omap_dss_probe, ++ .remove = omap_dss_remove, ++ .shutdown = omap_dss_shutdown, ++ .suspend = omap_dss_suspend, ++ .resume = omap_dss_resume, ++ .driver = { ++ .name = "omapdss", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++/* BUS */ ++static int dss_bus_match(struct device *dev, struct device_driver *driver) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ ++ DSSDBG("bus_match. dev %s/%s, drv %s\n", ++ dev_name(dev), dssdev->driver_name, driver->name); ++ ++ return strcmp(dssdev->driver_name, driver->name) == 0; ++} ++ ++static ssize_t device_name_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ dssdev->name ? ++ dssdev->name : ""); ++} ++ ++static struct device_attribute default_dev_attrs[] = { ++ __ATTR(name, S_IRUGO, device_name_show, NULL), ++ __ATTR_NULL, ++}; ++ ++static ssize_t driver_name_show(struct device_driver *drv, char *buf) ++{ ++ struct omap_dss_driver *dssdrv = to_dss_driver(drv); ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ dssdrv->driver.name ? ++ dssdrv->driver.name : ""); ++} ++static struct driver_attribute default_drv_attrs[] = { ++ __ATTR(name, S_IRUGO, driver_name_show, NULL), ++ __ATTR_NULL, ++}; ++ ++static struct bus_type dss_bus_type = { ++ .name = "omapdss", ++ .match = dss_bus_match, ++ .dev_attrs = default_dev_attrs, ++ .drv_attrs = default_drv_attrs, ++}; ++ ++static void dss_bus_release(struct device *dev) ++{ ++ DSSDBG("bus_release\n"); ++} ++ ++static struct device dss_bus = { ++ .release = dss_bus_release, ++}; ++ ++struct bus_type *dss_get_bus(void) ++{ ++ return &dss_bus_type; ++} ++ ++/* DRIVER */ ++static int dss_driver_probe(struct device *dev) ++{ ++ int r; ++ struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; ++ bool force; ++ ++ DSSDBG("driver_probe: dev %s/%s, drv %s\n", ++ dev_name(dev), dssdev->driver_name, ++ dssdrv->driver.name); ++ ++ dss_init_device(core.pdev, dssdev); ++ ++ /* skip this if the device is behind a ctrl */ ++ if (!dssdev->panel.ctrl) { ++ force = pdata->default_device == dssdev; ++ dss_recheck_connections(dssdev, force); ++ } ++ ++ r = dssdrv->probe(dssdev); ++ ++ if (r) { ++ DSSERR("driver probe failed: %d\n", r); ++ return r; ++ } ++ ++ DSSDBG("probe done for device %s\n", dev_name(dev)); ++ ++ dssdev->driver = dssdrv; ++ ++ return 0; ++} ++ ++static int dss_driver_remove(struct device *dev) ++{ ++ struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ ++ DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev), ++ dssdev->driver_name); ++ ++ dssdrv->remove(dssdev); ++ ++ dss_uninit_device(core.pdev, dssdev); ++ ++ dssdev->driver = NULL; ++ ++ return 0; ++} ++ ++int omap_dss_register_driver(struct omap_dss_driver *dssdriver) ++{ ++ dssdriver->driver.bus = &dss_bus_type; ++ dssdriver->driver.probe = dss_driver_probe; ++ dssdriver->driver.remove = dss_driver_remove; ++ return driver_register(&dssdriver->driver); ++} ++EXPORT_SYMBOL(omap_dss_register_driver); ++ ++void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver) ++{ ++ driver_unregister(&dssdriver->driver); ++} ++EXPORT_SYMBOL(omap_dss_unregister_driver); ++ ++/* DEVICE */ ++static void reset_device(struct device *dev, int check) ++{ ++ u8 *dev_p = (u8 *)dev; ++ u8 *dev_end = dev_p + sizeof(*dev); ++ void *saved_pdata; ++ ++ saved_pdata = dev->platform_data; ++ if (check) { ++ /* ++ * Check if there is any other setting than platform_data ++ * in struct device; warn that these will be reset by our ++ * init. ++ */ ++ dev->platform_data = NULL; ++ while (dev_p < dev_end) { ++ if (*dev_p) { ++ WARN("%s: struct device fields will be " ++ "discarded\n", ++ __func__); ++ break; ++ } ++ dev_p++; ++ } ++ } ++ memset(dev, 0, sizeof(*dev)); ++ dev->platform_data = saved_pdata; ++} ++ ++ ++static void omap_dss_dev_release(struct device *dev) ++{ ++ reset_device(dev, 0); ++} ++ ++int omap_dss_register_device(struct omap_dss_device *dssdev) ++{ ++ static int dev_num; ++ static int panel_num; ++ int r; ++ ++ WARN_ON(!dssdev->driver_name); ++ ++ reset_device(&dssdev->dev, 1); ++ dssdev->dev.bus = &dss_bus_type; ++ dssdev->dev.parent = &dss_bus; ++ dssdev->dev.release = omap_dss_dev_release; ++ dev_set_name(&dssdev->dev, "display%d", dev_num++); ++ r = device_register(&dssdev->dev); ++ if (r) ++ return r; ++ ++ if (dssdev->ctrl.panel) { ++ struct omap_dss_device *panel = dssdev->ctrl.panel; ++ ++ panel->panel.ctrl = dssdev; ++ ++ reset_device(&panel->dev, 1); ++ panel->dev.bus = &dss_bus_type; ++ panel->dev.parent = &dssdev->dev; ++ panel->dev.release = omap_dss_dev_release; ++ dev_set_name(&panel->dev, "panel%d", panel_num++); ++ r = device_register(&panel->dev); ++ if (r) ++ return r; ++ } ++ ++ return 0; ++} ++ ++void omap_dss_unregister_device(struct omap_dss_device *dssdev) ++{ ++ device_unregister(&dssdev->dev); ++ ++ if (dssdev->ctrl.panel) { ++ struct omap_dss_device *panel = dssdev->ctrl.panel; ++ device_unregister(&panel->dev); ++ } ++} ++ ++/* BUS */ ++static int omap_dss_bus_register(void) ++{ ++ int r; ++ ++ r = bus_register(&dss_bus_type); ++ if (r) { ++ DSSERR("bus register failed\n"); ++ return r; ++ } ++ ++ dev_set_name(&dss_bus, "omapdss"); ++ r = device_register(&dss_bus); ++ if (r) { ++ DSSERR("bus driver register failed\n"); ++ bus_unregister(&dss_bus_type); ++ return r; ++ } ++ ++ return 0; ++} ++ ++/* INIT */ ++ ++#ifdef CONFIG_OMAP2_DSS_MODULE ++static void omap_dss_bus_unregister(void) ++{ ++ device_unregister(&dss_bus); ++ ++ bus_unregister(&dss_bus_type); ++} ++ ++static int __init omap_dss_init(void) ++{ ++ int r; ++ ++ r = omap_dss_bus_register(); ++ if (r) ++ return r; ++ ++ r = platform_driver_register(&omap_dss_driver); ++ if (r) { ++ omap_dss_bus_unregister(); ++ return r; ++ } ++ ++ return 0; ++} ++ ++static void __exit omap_dss_exit(void) ++{ ++ platform_driver_unregister(&omap_dss_driver); ++ ++ omap_dss_bus_unregister(); ++} ++ ++module_init(omap_dss_init); ++module_exit(omap_dss_exit); ++#else ++static int __init omap_dss_init(void) ++{ ++ return omap_dss_bus_register(); ++} ++ ++static int __init omap_dss_init2(void) ++{ ++ return platform_driver_register(&omap_dss_driver); ++} ++ ++core_initcall(omap_dss_init); ++device_initcall(omap_dss_init2); ++#endif ++ ++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); ++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); ++MODULE_LICENSE("GPL v2"); ++ +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +new file mode 100644 +index 0000000..d648475 +--- /dev/null ++++ b/drivers/video/omap2/dss/dispc.c +@@ -0,0 +1,3182 @@ ++/* ++ * linux/drivers/video/omap2/dss/dispc.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPC" ++ ++#include <linux/kernel.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++#include <linux/jiffies.h> ++#include <linux/seq_file.h> ++#include <linux/delay.h> ++#include <linux/workqueue.h> ++ ++#include <mach/sram.h> ++#include <mach/board.h> ++#include <mach/clock.h> ++ ++#include <mach/display.h> ++ ++#include "dss.h" ++ ++/* DISPC */ ++#define DISPC_BASE 0x48050400 ++ ++#define DISPC_SZ_REGS SZ_1K ++ ++struct dispc_reg { u16 idx; }; ++ ++#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) ++ ++/* DISPC common */ ++#define DISPC_REVISION DISPC_REG(0x0000) ++#define DISPC_SYSCONFIG DISPC_REG(0x0010) ++#define DISPC_SYSSTATUS DISPC_REG(0x0014) ++#define DISPC_IRQSTATUS DISPC_REG(0x0018) ++#define DISPC_IRQENABLE DISPC_REG(0x001C) ++#define DISPC_CONTROL DISPC_REG(0x0040) ++#define DISPC_CONFIG DISPC_REG(0x0044) ++#define DISPC_CAPABLE DISPC_REG(0x0048) ++#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) ++#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) ++#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) ++#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) ++#define DISPC_LINE_STATUS DISPC_REG(0x005C) ++#define DISPC_LINE_NUMBER DISPC_REG(0x0060) ++#define DISPC_TIMING_H DISPC_REG(0x0064) ++#define DISPC_TIMING_V DISPC_REG(0x0068) ++#define DISPC_POL_FREQ DISPC_REG(0x006C) ++#define DISPC_DIVISOR DISPC_REG(0x0070) ++#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) ++#define DISPC_SIZE_DIG DISPC_REG(0x0078) ++#define DISPC_SIZE_LCD DISPC_REG(0x007C) ++ ++/* DISPC GFX plane */ ++#define DISPC_GFX_BA0 DISPC_REG(0x0080) ++#define DISPC_GFX_BA1 DISPC_REG(0x0084) ++#define DISPC_GFX_POSITION DISPC_REG(0x0088) ++#define DISPC_GFX_SIZE DISPC_REG(0x008C) ++#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) ++#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) ++#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) ++#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) ++#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) ++#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) ++#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) ++ ++#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) ++#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) ++#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) ++ ++#define DISPC_CPR_COEF_R DISPC_REG(0x0220) ++#define DISPC_CPR_COEF_G DISPC_REG(0x0224) ++#define DISPC_CPR_COEF_B DISPC_REG(0x0228) ++ ++#define DISPC_GFX_PRELOAD DISPC_REG(0x022C) ++ ++/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ ++#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) ++ ++#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) ++#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) ++#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) ++#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) ++#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) ++#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) ++#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) ++#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) ++#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) ++#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) ++#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) ++#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) ++#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) ++ ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4} */ ++#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) ++ ++#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) ++ ++ ++#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_OCP_ERR | \ ++ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_SYNC_LOST | \ ++ DISPC_IRQ_SYNC_LOST_DIGIT) ++ ++#define DISPC_MAX_NR_ISRS 8 ++ ++struct omap_dispc_isr_data { ++ omap_dispc_isr_t isr; ++ void *arg; ++ u32 mask; ++}; ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dispc_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) ++ ++static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, ++ DISPC_VID_ATTRIBUTES(0), ++ DISPC_VID_ATTRIBUTES(1) }; ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dpll4_m4_ck; ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_prate; ++ struct dispc_clock_info cache_cinfo; ++ ++ u32 fifo_size[3]; ++ ++ spinlock_t irq_lock; ++ u32 irq_error_mask; ++ struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; ++ u32 error_irqs; ++ struct work_struct error_work; ++ ++ u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; ++} dispc; ++ ++static void _omap_dispc_set_irqs(void); ++ ++static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) ++{ ++ __raw_writel(val, dispc.base + idx.idx); ++} ++ ++static inline u32 dispc_read_reg(const struct dispc_reg idx) ++{ ++ return __raw_readl(dispc.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) ++#define RR(reg) \ ++ dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) ++ ++void dispc_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(IRQENABLE); ++ SR(CONTROL); ++ SR(CONFIG); ++ SR(DEFAULT_COLOR0); ++ SR(DEFAULT_COLOR1); ++ SR(TRANS_COLOR0); ++ SR(TRANS_COLOR1); ++ SR(LINE_NUMBER); ++ SR(TIMING_H); ++ SR(TIMING_V); ++ SR(POL_FREQ); ++ SR(DIVISOR); ++ SR(GLOBAL_ALPHA); ++ SR(SIZE_DIG); ++ SR(SIZE_LCD); ++ ++ SR(GFX_BA0); ++ SR(GFX_BA1); ++ SR(GFX_POSITION); ++ SR(GFX_SIZE); ++ SR(GFX_ATTRIBUTES); ++ SR(GFX_FIFO_THRESHOLD); ++ SR(GFX_ROW_INC); ++ SR(GFX_PIXEL_INC); ++ SR(GFX_WINDOW_SKIP); ++ SR(GFX_TABLE_BA); ++ ++ SR(DATA_CYCLE1); ++ SR(DATA_CYCLE2); ++ SR(DATA_CYCLE3); ++ ++ SR(CPR_COEF_R); ++ SR(CPR_COEF_G); ++ SR(CPR_COEF_B); ++ ++ SR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ SR(VID_BA0(0)); ++ SR(VID_BA1(0)); ++ SR(VID_POSITION(0)); ++ SR(VID_SIZE(0)); ++ SR(VID_ATTRIBUTES(0)); ++ SR(VID_FIFO_THRESHOLD(0)); ++ SR(VID_ROW_INC(0)); ++ SR(VID_PIXEL_INC(0)); ++ SR(VID_FIR(0)); ++ SR(VID_PICTURE_SIZE(0)); ++ SR(VID_ACCU0(0)); ++ SR(VID_ACCU1(0)); ++ ++ SR(VID_FIR_COEF_H(0, 0)); ++ SR(VID_FIR_COEF_H(0, 1)); ++ SR(VID_FIR_COEF_H(0, 2)); ++ SR(VID_FIR_COEF_H(0, 3)); ++ SR(VID_FIR_COEF_H(0, 4)); ++ SR(VID_FIR_COEF_H(0, 5)); ++ SR(VID_FIR_COEF_H(0, 6)); ++ SR(VID_FIR_COEF_H(0, 7)); ++ ++ SR(VID_FIR_COEF_HV(0, 0)); ++ SR(VID_FIR_COEF_HV(0, 1)); ++ SR(VID_FIR_COEF_HV(0, 2)); ++ SR(VID_FIR_COEF_HV(0, 3)); ++ SR(VID_FIR_COEF_HV(0, 4)); ++ SR(VID_FIR_COEF_HV(0, 5)); ++ SR(VID_FIR_COEF_HV(0, 6)); ++ SR(VID_FIR_COEF_HV(0, 7)); ++ ++ SR(VID_CONV_COEF(0, 0)); ++ SR(VID_CONV_COEF(0, 1)); ++ SR(VID_CONV_COEF(0, 2)); ++ SR(VID_CONV_COEF(0, 3)); ++ SR(VID_CONV_COEF(0, 4)); ++ ++ SR(VID_FIR_COEF_V(0, 0)); ++ SR(VID_FIR_COEF_V(0, 1)); ++ SR(VID_FIR_COEF_V(0, 2)); ++ SR(VID_FIR_COEF_V(0, 3)); ++ SR(VID_FIR_COEF_V(0, 4)); ++ SR(VID_FIR_COEF_V(0, 5)); ++ SR(VID_FIR_COEF_V(0, 6)); ++ SR(VID_FIR_COEF_V(0, 7)); ++ ++ SR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ SR(VID_BA0(1)); ++ SR(VID_BA1(1)); ++ SR(VID_POSITION(1)); ++ SR(VID_SIZE(1)); ++ SR(VID_ATTRIBUTES(1)); ++ SR(VID_FIFO_THRESHOLD(1)); ++ SR(VID_ROW_INC(1)); ++ SR(VID_PIXEL_INC(1)); ++ SR(VID_FIR(1)); ++ SR(VID_PICTURE_SIZE(1)); ++ SR(VID_ACCU0(1)); ++ SR(VID_ACCU1(1)); ++ ++ SR(VID_FIR_COEF_H(1, 0)); ++ SR(VID_FIR_COEF_H(1, 1)); ++ SR(VID_FIR_COEF_H(1, 2)); ++ SR(VID_FIR_COEF_H(1, 3)); ++ SR(VID_FIR_COEF_H(1, 4)); ++ SR(VID_FIR_COEF_H(1, 5)); ++ SR(VID_FIR_COEF_H(1, 6)); ++ SR(VID_FIR_COEF_H(1, 7)); ++ ++ SR(VID_FIR_COEF_HV(1, 0)); ++ SR(VID_FIR_COEF_HV(1, 1)); ++ SR(VID_FIR_COEF_HV(1, 2)); ++ SR(VID_FIR_COEF_HV(1, 3)); ++ SR(VID_FIR_COEF_HV(1, 4)); ++ SR(VID_FIR_COEF_HV(1, 5)); ++ SR(VID_FIR_COEF_HV(1, 6)); ++ SR(VID_FIR_COEF_HV(1, 7)); ++ ++ SR(VID_CONV_COEF(1, 0)); ++ SR(VID_CONV_COEF(1, 1)); ++ SR(VID_CONV_COEF(1, 2)); ++ SR(VID_CONV_COEF(1, 3)); ++ SR(VID_CONV_COEF(1, 4)); ++ ++ SR(VID_FIR_COEF_V(1, 0)); ++ SR(VID_FIR_COEF_V(1, 1)); ++ SR(VID_FIR_COEF_V(1, 2)); ++ SR(VID_FIR_COEF_V(1, 3)); ++ SR(VID_FIR_COEF_V(1, 4)); ++ SR(VID_FIR_COEF_V(1, 5)); ++ SR(VID_FIR_COEF_V(1, 6)); ++ SR(VID_FIR_COEF_V(1, 7)); ++ ++ SR(VID_PRELOAD(1)); ++} ++ ++void dispc_restore_context(void) ++{ ++ RR(SYSCONFIG); ++ RR(IRQENABLE); ++ /*RR(CONTROL);*/ ++ RR(CONFIG); ++ RR(DEFAULT_COLOR0); ++ RR(DEFAULT_COLOR1); ++ RR(TRANS_COLOR0); ++ RR(TRANS_COLOR1); ++ RR(LINE_NUMBER); ++ RR(TIMING_H); ++ RR(TIMING_V); ++ RR(POL_FREQ); ++ RR(DIVISOR); ++ RR(GLOBAL_ALPHA); ++ RR(SIZE_DIG); ++ RR(SIZE_LCD); ++ ++ RR(GFX_BA0); ++ RR(GFX_BA1); ++ RR(GFX_POSITION); ++ RR(GFX_SIZE); ++ RR(GFX_ATTRIBUTES); ++ RR(GFX_FIFO_THRESHOLD); ++ RR(GFX_ROW_INC); ++ RR(GFX_PIXEL_INC); ++ RR(GFX_WINDOW_SKIP); ++ RR(GFX_TABLE_BA); ++ ++ RR(DATA_CYCLE1); ++ RR(DATA_CYCLE2); ++ RR(DATA_CYCLE3); ++ ++ RR(CPR_COEF_R); ++ RR(CPR_COEF_G); ++ RR(CPR_COEF_B); ++ ++ RR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ RR(VID_BA0(0)); ++ RR(VID_BA1(0)); ++ RR(VID_POSITION(0)); ++ RR(VID_SIZE(0)); ++ RR(VID_ATTRIBUTES(0)); ++ RR(VID_FIFO_THRESHOLD(0)); ++ RR(VID_ROW_INC(0)); ++ RR(VID_PIXEL_INC(0)); ++ RR(VID_FIR(0)); ++ RR(VID_PICTURE_SIZE(0)); ++ RR(VID_ACCU0(0)); ++ RR(VID_ACCU1(0)); ++ ++ RR(VID_FIR_COEF_H(0, 0)); ++ RR(VID_FIR_COEF_H(0, 1)); ++ RR(VID_FIR_COEF_H(0, 2)); ++ RR(VID_FIR_COEF_H(0, 3)); ++ RR(VID_FIR_COEF_H(0, 4)); ++ RR(VID_FIR_COEF_H(0, 5)); ++ RR(VID_FIR_COEF_H(0, 6)); ++ RR(VID_FIR_COEF_H(0, 7)); ++ ++ RR(VID_FIR_COEF_HV(0, 0)); ++ RR(VID_FIR_COEF_HV(0, 1)); ++ RR(VID_FIR_COEF_HV(0, 2)); ++ RR(VID_FIR_COEF_HV(0, 3)); ++ RR(VID_FIR_COEF_HV(0, 4)); ++ RR(VID_FIR_COEF_HV(0, 5)); ++ RR(VID_FIR_COEF_HV(0, 6)); ++ RR(VID_FIR_COEF_HV(0, 7)); ++ ++ RR(VID_CONV_COEF(0, 0)); ++ RR(VID_CONV_COEF(0, 1)); ++ RR(VID_CONV_COEF(0, 2)); ++ RR(VID_CONV_COEF(0, 3)); ++ RR(VID_CONV_COEF(0, 4)); ++ ++ RR(VID_FIR_COEF_V(0, 0)); ++ RR(VID_FIR_COEF_V(0, 1)); ++ RR(VID_FIR_COEF_V(0, 2)); ++ RR(VID_FIR_COEF_V(0, 3)); ++ RR(VID_FIR_COEF_V(0, 4)); ++ RR(VID_FIR_COEF_V(0, 5)); ++ RR(VID_FIR_COEF_V(0, 6)); ++ RR(VID_FIR_COEF_V(0, 7)); ++ ++ RR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ RR(VID_BA0(1)); ++ RR(VID_BA1(1)); ++ RR(VID_POSITION(1)); ++ RR(VID_SIZE(1)); ++ RR(VID_ATTRIBUTES(1)); ++ RR(VID_FIFO_THRESHOLD(1)); ++ RR(VID_ROW_INC(1)); ++ RR(VID_PIXEL_INC(1)); ++ RR(VID_FIR(1)); ++ RR(VID_PICTURE_SIZE(1)); ++ RR(VID_ACCU0(1)); ++ RR(VID_ACCU1(1)); ++ ++ RR(VID_FIR_COEF_H(1, 0)); ++ RR(VID_FIR_COEF_H(1, 1)); ++ RR(VID_FIR_COEF_H(1, 2)); ++ RR(VID_FIR_COEF_H(1, 3)); ++ RR(VID_FIR_COEF_H(1, 4)); ++ RR(VID_FIR_COEF_H(1, 5)); ++ RR(VID_FIR_COEF_H(1, 6)); ++ RR(VID_FIR_COEF_H(1, 7)); ++ ++ RR(VID_FIR_COEF_HV(1, 0)); ++ RR(VID_FIR_COEF_HV(1, 1)); ++ RR(VID_FIR_COEF_HV(1, 2)); ++ RR(VID_FIR_COEF_HV(1, 3)); ++ RR(VID_FIR_COEF_HV(1, 4)); ++ RR(VID_FIR_COEF_HV(1, 5)); ++ RR(VID_FIR_COEF_HV(1, 6)); ++ RR(VID_FIR_COEF_HV(1, 7)); ++ ++ RR(VID_CONV_COEF(1, 0)); ++ RR(VID_CONV_COEF(1, 1)); ++ RR(VID_CONV_COEF(1, 2)); ++ RR(VID_CONV_COEF(1, 3)); ++ RR(VID_CONV_COEF(1, 4)); ++ ++ RR(VID_FIR_COEF_V(1, 0)); ++ RR(VID_FIR_COEF_V(1, 1)); ++ RR(VID_FIR_COEF_V(1, 2)); ++ RR(VID_FIR_COEF_V(1, 3)); ++ RR(VID_FIR_COEF_V(1, 4)); ++ RR(VID_FIR_COEF_V(1, 5)); ++ RR(VID_FIR_COEF_V(1, 6)); ++ RR(VID_FIR_COEF_V(1, 7)); ++ ++ RR(VID_PRELOAD(1)); ++ ++ /* enable last, because LCD & DIGIT enable are here */ ++ RR(CONTROL); ++} ++ ++#undef SR ++#undef RR ++ ++static inline void enable_clocks(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++bool dispc_go_busy(enum omap_channel channel) ++{ ++ int bit; ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 5; /* GOLCD */ ++ else ++ bit = 6; /* GODIGIT */ ++ ++ return REG_GET(DISPC_CONTROL, bit, bit) == 1; ++} ++ ++void dispc_go(enum omap_channel channel) ++{ ++ int bit; ++ ++ enable_clocks(1); ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 0; /* LCDENABLE */ ++ else ++ bit = 1; /* DIGITALENABLE */ ++ ++ /* if the channel is not enabled, we don't need GO */ ++ if (REG_GET(DISPC_CONTROL, bit, bit) == 0) ++ goto end; ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 5; /* GOLCD */ ++ else ++ bit = 6; /* GODIGIT */ ++ ++ if (REG_GET(DISPC_CONTROL, bit, bit) == 1) { ++ DSSERR("GO bit not down for channel %d\n", channel); ++ goto end; ++ } ++ ++ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); ++ ++ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); ++end: ++ enable_clocks(0); ++} ++ ++static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); ++} ++ ++static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); ++} ++ ++static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value); ++} ++ ++static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, ++ int vscaleup, int five_taps) ++{ ++ /* Coefficients for horizontal up-sampling */ ++ static const u32 coef_hup[8] = { ++ 0x00800000, ++ 0x0D7CF800, ++ 0x1E70F5FF, ++ 0x335FF5FE, ++ 0xF74949F7, ++ 0xF55F33FB, ++ 0xF5701EFE, ++ 0xF87C0DFF, ++ }; ++ ++ /* Coefficients for horizontal down-sampling */ ++ static const u32 coef_hdown[8] = { ++ 0x24382400, ++ 0x28371FFE, ++ 0x2C361BFB, ++ 0x303516F9, ++ 0x11343311, ++ 0x1635300C, ++ 0x1B362C08, ++ 0x1F372804, ++ }; ++ ++ /* Coefficients for horizontal and vertical up-sampling */ ++ static const u32 coef_hvup[2][8] = { ++ { ++ 0x00800000, ++ 0x037B02FF, ++ 0x0C6F05FE, ++ 0x205907FB, ++ 0x00404000, ++ 0x075920FE, ++ 0x056F0CFF, ++ 0x027B0300, ++ }, ++ { ++ 0x00800000, ++ 0x0D7CF8FF, ++ 0x1E70F5FE, ++ 0x335FF5FB, ++ 0xF7404000, ++ 0xF55F33FE, ++ 0xF5701EFF, ++ 0xF87C0D00, ++ }, ++ }; ++ ++ /* Coefficients for horizontal and vertical down-sampling */ ++ static const u32 coef_hvdown[2][8] = { ++ { ++ 0x24382400, ++ 0x28391F04, ++ 0x2D381B08, ++ 0x3237170C, ++ 0x123737F7, ++ 0x173732F9, ++ 0x1B382DFB, ++ 0x1F3928FE, ++ }, ++ { ++ 0x24382400, ++ 0x28371F04, ++ 0x2C361B08, ++ 0x3035160C, ++ 0x113433F7, ++ 0x163530F9, ++ 0x1B362CFB, ++ 0x1F3728FE, ++ }, ++ }; ++ ++ /* Coefficients for vertical up-sampling */ ++ static const u32 coef_vup[8] = { ++ 0x00000000, ++ 0x0000FF00, ++ 0x0000FEFF, ++ 0x0000FBFE, ++ 0x000000F7, ++ 0x0000FEFB, ++ 0x0000FFFE, ++ 0x000000FF, ++ }; ++ ++ ++ /* Coefficients for vertical down-sampling */ ++ static const u32 coef_vdown[8] = { ++ 0x00000000, ++ 0x000004FE, ++ 0x000008FB, ++ 0x00000CF9, ++ 0x0000F711, ++ 0x0000F90C, ++ 0x0000FB08, ++ 0x0000FE04, ++ }; ++ ++ const u32 *h_coef; ++ const u32 *hv_coef; ++ const u32 *hv_coef_mod; ++ const u32 *v_coef; ++ int i; ++ ++ if (hscaleup) ++ h_coef = coef_hup; ++ else ++ h_coef = coef_hdown; ++ ++ if (vscaleup) { ++ hv_coef = coef_hvup[five_taps]; ++ v_coef = coef_vup; ++ ++ if (hscaleup) ++ hv_coef_mod = NULL; ++ else ++ hv_coef_mod = coef_hvdown[five_taps]; ++ } else { ++ hv_coef = coef_hvdown[five_taps]; ++ v_coef = coef_vdown; ++ ++ if (hscaleup) ++ hv_coef_mod = coef_hvup[five_taps]; ++ else ++ hv_coef_mod = NULL; ++ } ++ ++ for (i = 0; i < 8; i++) { ++ u32 h, hv; ++ ++ h = h_coef[i]; ++ ++ hv = hv_coef[i]; ++ ++ if (hv_coef_mod) { ++ hv &= 0xffffff00; ++ hv |= (hv_coef_mod[i] & 0xff); ++ } ++ ++ _dispc_write_firh_reg(plane, i, h); ++ _dispc_write_firhv_reg(plane, i, hv); ++ } ++ ++ if (!five_taps) ++ return; ++ ++ for (i = 0; i < 8; i++) { ++ u32 v; ++ v = v_coef[i]; ++ _dispc_write_firv_reg(plane, i, v); ++ } ++} ++ ++static void _dispc_setup_color_conv_coef(void) ++{ ++ const struct color_conv_coef { ++ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; ++ int full_range; ++ } ctbl_bt601_5 = { ++ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, ++ }; ++ ++ const struct color_conv_coef *ct; ++ ++#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) ++ ++ ct = &ctbl_bt601_5; ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); ++ ++#undef CVAL ++ ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); ++} ++ ++ ++static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, ++ DISPC_VID_BA0(0), ++ DISPC_VID_BA0(1) }; ++ ++ dispc_write_reg(ba0_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, ++ DISPC_VID_BA1(0), ++ DISPC_VID_BA1(1) }; ++ ++ dispc_write_reg(ba1_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) ++{ ++ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, ++ DISPC_VID_POSITION(0), ++ DISPC_VID_POSITION(1) }; ++ ++ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); ++ dispc_write_reg(pos_reg[plane], val); ++} ++ ++static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) ++{ ++ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, ++ DISPC_VID_PICTURE_SIZE(0), ++ DISPC_VID_PICTURE_SIZE(1) }; ++ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(siz_reg[plane], val); ++} ++ ++static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) ++{ ++ u32 val; ++ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), ++ DISPC_VID_SIZE(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(vsi_reg[plane-1], val); ++} ++ ++static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha) ++{ ++ ++ BUG_ON(plane == OMAP_DSS_VIDEO1); ++ ++ if (plane == OMAP_DSS_GFX) ++ REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0); ++ else if (plane == OMAP_DSS_VIDEO2) ++ REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16); ++} ++ ++static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, ++ DISPC_VID_PIXEL_INC(0), ++ DISPC_VID_PIXEL_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, ++ DISPC_VID_ROW_INC(0), ++ DISPC_VID_ROW_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_color_mode(enum omap_plane plane, ++ enum omap_color_mode color_mode) ++{ ++ u32 m = 0; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_CLUT1: ++ m = 0x0; break; ++ case OMAP_DSS_COLOR_CLUT2: ++ m = 0x1; break; ++ case OMAP_DSS_COLOR_CLUT4: ++ m = 0x2; break; ++ case OMAP_DSS_COLOR_CLUT8: ++ m = 0x3; break; ++ case OMAP_DSS_COLOR_RGB12U: ++ m = 0x4; break; ++ case OMAP_DSS_COLOR_ARGB16: ++ m = 0x5; break; ++ case OMAP_DSS_COLOR_RGB16: ++ m = 0x6; break; ++ case OMAP_DSS_COLOR_RGB24U: ++ m = 0x8; break; ++ case OMAP_DSS_COLOR_RGB24P: ++ m = 0x9; break; ++ case OMAP_DSS_COLOR_YUV2: ++ m = 0xa; break; ++ case OMAP_DSS_COLOR_UYVY: ++ m = 0xb; break; ++ case OMAP_DSS_COLOR_ARGB32: ++ m = 0xc; break; ++ case OMAP_DSS_COLOR_RGBA32: ++ m = 0xd; break; ++ case OMAP_DSS_COLOR_RGBX32: ++ m = 0xe; break; ++ default: ++ BUG(); break; ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); ++} ++ ++static void _dispc_set_channel_out(enum omap_plane plane, ++ enum omap_channel channel) ++{ ++ int shift; ++ u32 val; ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 8; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 16; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, channel, shift, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size) ++{ ++ int shift; ++ u32 val; ++ ++ enable_clocks(1); ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 6; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 14; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, burst_size, shift+1, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) ++{ ++ u32 val; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, enable, 9, 9); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_enable_replication(enum omap_plane plane, bool enable) ++{ ++ int bit; ++ ++ if (plane == OMAP_DSS_GFX) ++ bit = 5; ++ else ++ bit = 10; ++ ++ enable_clocks(1); ++ REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit); ++ enable_clocks(0); ++} ++ ++void dispc_set_lcd_size(u16 width, u16 height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_LCD, val); ++ enable_clocks(0); ++} ++ ++void dispc_set_digit_size(u16 width, u16 height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_DIG, val); ++ enable_clocks(0); ++} ++ ++static void dispc_read_plane_fifo_sizes(void) ++{ ++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, ++ DISPC_VID_FIFO_SIZE_STATUS(0), ++ DISPC_VID_FIFO_SIZE_STATUS(1) }; ++ u32 size; ++ int plane; ++ ++ enable_clocks(1); ++ ++ for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) { ++ if (cpu_is_omap24xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); ++ else if (cpu_is_omap34xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); ++ else ++ BUG(); ++ ++ dispc.fifo_size[plane] = size; ++ } ++ ++ enable_clocks(0); ++} ++ ++u32 dispc_get_plane_fifo_size(enum omap_plane plane) ++{ ++ return dispc.fifo_size[plane]; ++} ++ ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) ++{ ++ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, ++ DISPC_VID_FIFO_THRESHOLD(0), ++ DISPC_VID_FIFO_THRESHOLD(1) }; ++ enable_clocks(1); ++ ++ DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n", ++ plane, ++ REG_GET(ftrs_reg[plane], 11, 0), ++ REG_GET(ftrs_reg[plane], 27, 16), ++ low, high); ++ ++ if (cpu_is_omap24xx()) ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); ++ else ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); ++ ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifomerge(bool enable) ++{ ++ enable_clocks(1); ++ ++ DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) ++{ ++ u32 val; ++ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), ++ DISPC_VID_FIR(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ if (cpu_is_omap24xx()) ++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ else ++ val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); ++ dispc_write_reg(fir_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), ++ DISPC_VID_ACCU0(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac0_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), ++ DISPC_VID_ACCU1(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac1_reg[plane-1], val); ++} ++ ++ ++static void _dispc_set_scaling(enum omap_plane plane, ++ u16 orig_width, u16 orig_height, ++ u16 out_width, u16 out_height, ++ bool ilace, bool five_taps, ++ bool fieldmode) ++{ ++ int fir_hinc; ++ int fir_vinc; ++ int hscaleup, vscaleup; ++ int accu0 = 0; ++ int accu1 = 0; ++ u32 l; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ hscaleup = orig_width <= out_width; ++ vscaleup = orig_height <= out_height; ++ ++ _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); ++ ++ if (!orig_width || orig_width == out_width) ++ fir_hinc = 0; ++ else ++ fir_hinc = 1024 * orig_width / out_width; ++ ++ if (!orig_height || orig_height == out_height) ++ fir_vinc = 0; ++ else ++ fir_vinc = 1024 * orig_height / out_height; ++ ++ _dispc_set_fir(plane, fir_hinc, fir_vinc); ++ ++ l = dispc_read_reg(dispc_reg_att[plane]); ++ l &= ~((0x0f << 5) | (0x3 << 21)); ++ ++ l |= fir_hinc ? (1 << 5) : 0; ++ l |= fir_vinc ? (1 << 6) : 0; ++ ++ l |= hscaleup ? 0 : (1 << 7); ++ l |= vscaleup ? 0 : (1 << 8); ++ ++ l |= five_taps ? (1 << 21) : 0; ++ l |= five_taps ? (1 << 22) : 0; ++ ++ dispc_write_reg(dispc_reg_att[plane], l); ++ ++ /* ++ * field 0 = even field = bottom field ++ * field 1 = odd field = top field ++ */ ++ if (ilace && !fieldmode) { ++ accu1 = 0; ++ accu0 = (fir_vinc / 2) & 0x3ff; ++ if (accu0 >= 1024/2) { ++ accu1 = 1024/2; ++ accu0 -= accu1; ++ } ++ } ++ ++ _dispc_set_vid_accu0(plane, 0, accu0); ++ _dispc_set_vid_accu1(plane, 0, accu1); ++} ++ ++static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, ++ bool mirroring, enum omap_color_mode color_mode) ++{ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) { ++ int vidrot = 0; ++ ++ if (mirroring) { ++ switch (rotation) { ++ case 0: ++ vidrot = 2; ++ break; ++ case 1: ++ vidrot = 1; ++ break; ++ case 2: ++ vidrot = 0; ++ break; ++ case 3: ++ vidrot = 3; ++ break; ++ } ++ } else { ++ switch (rotation) { ++ case 0: ++ vidrot = 0; ++ break; ++ case 1: ++ vidrot = 1; ++ break; ++ case 2: ++ vidrot = 2; ++ break; ++ case 3: ++ vidrot = 3; ++ break; ++ } ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12); ++ ++ if (rotation == 1 || rotation == 3) ++ REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18); ++ else ++ REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18); ++ } else { ++ REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12); ++ REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18); ++ } ++} ++ ++static s32 pixinc(int pixels, u8 ps) ++{ ++ if (pixels == 1) ++ return 1; ++ else if (pixels > 1) ++ return 1 + (pixels - 1) * ps; ++ else if (pixels < 0) ++ return 1 - (-pixels + 1) * ps; ++ else ++ BUG(); ++} ++ ++static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, ++ u16 screen_width, ++ u16 width, u16 height, ++ enum omap_color_mode color_mode, bool fieldmode, ++ unsigned int field_offset, ++ unsigned *offset0, unsigned *offset1, ++ s32 *row_inc, s32 *pix_inc) ++{ ++ u8 ps; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ ps = 2; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ ps = 3; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ ps = 4; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, ++ width, height); ++ ++ /* ++ * field 0 = even field = bottom field ++ * field 1 = odd field = top field ++ */ ++ switch (rotation + mirror * 4) { ++ case 0: ++ case 2: ++ /* ++ * If the pixel format is YUV or UYVY divide the width ++ * of the image by 2 for 0 and 180 degree rotation. ++ */ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) ++ width = width >> 1; ++ case 1: ++ case 3: ++ *offset1 = 0; ++ if (field_offset) ++ *offset0 = field_offset * screen_width * ps; ++ else ++ *offset0 = 0; ++ ++ *row_inc = pixinc(1 + (screen_width - width) + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ case 4: ++ case 6: ++ /* If the pixel format is YUV or UYVY divide the width ++ * of the image by 2 for 0 degree and 180 degree ++ */ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) ++ width = width >> 1; ++ case 5: ++ case 7: ++ *offset1 = 0; ++ if (field_offset) ++ *offset0 = field_offset * screen_width * ps; ++ else ++ *offset0 = 0; ++ *row_inc = pixinc(1 - (screen_width + width) - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static void calc_dma_rotation_offset(u8 rotation, bool mirror, ++ u16 screen_width, ++ u16 width, u16 height, ++ enum omap_color_mode color_mode, bool fieldmode, ++ unsigned int field_offset, ++ unsigned *offset0, unsigned *offset1, ++ s32 *row_inc, s32 *pix_inc) ++{ ++ u8 ps; ++ u16 fbw, fbh; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ ps = 2; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ ps = 3; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ ps = 4; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ ps = 2; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, ++ width, height); ++ ++ /* width & height are overlay sizes, convert to fb sizes */ ++ ++ if (rotation == 0 || rotation == 2) { ++ fbw = width; ++ fbh = height; ++ } else { ++ fbw = height; ++ fbh = width; ++ } ++ ++ /* ++ * field 0 = even field = bottom field ++ * field 1 = odd field = top field ++ */ ++ switch (rotation + mirror * 4) { ++ case 0: ++ *offset1 = 0; ++ if (field_offset) ++ *offset0 = *offset1 + field_offset * screen_width * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(1 + (screen_width - fbw) + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ case 1: ++ *offset1 = screen_width * (fbh - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 + field_offset * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(screen_width * (fbh - 1) + 1 + ++ (fieldmode ? 1 : 0), ps); ++ *pix_inc = pixinc(-screen_width, ps); ++ break; ++ case 2: ++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 - field_offset * screen_width * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(-1 - ++ (screen_width - fbw) - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(-1, ps); ++ break; ++ case 3: ++ *offset1 = (fbw - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 - field_offset * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - ++ (fieldmode ? 1 : 0), ps); ++ *pix_inc = pixinc(screen_width, ps); ++ break; ++ ++ /* mirroring */ ++ case 0 + 4: ++ *offset1 = (fbw - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 + field_offset * screen_width * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(screen_width * 2 - 1 + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(-1, ps); ++ break; ++ ++ case 1 + 4: ++ *offset1 = 0; ++ if (field_offset) ++ *offset0 = *offset1 + field_offset * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + ++ (fieldmode ? 1 : 0), ++ ps); ++ *pix_inc = pixinc(screen_width, ps); ++ break; ++ ++ case 2 + 4: ++ *offset1 = screen_width * (fbh - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 - field_offset * screen_width * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(1 - screen_width * 2 - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ case 3 + 4: ++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ if (field_offset) ++ *offset0 = *offset1 - field_offset * ps; ++ else ++ *offset0 = *offset1; ++ *row_inc = pixinc(screen_width * (fbh - 1) - 1 - ++ (fieldmode ? 1 : 0), ++ ps); ++ *pix_inc = pixinc(-screen_width, ps); ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static unsigned long calc_fclk_five_taps(u16 width, u16 height, ++ u16 out_width, u16 out_height, enum omap_color_mode color_mode) ++{ ++ u32 fclk = 0; ++ /* FIXME venc pclk? */ ++ u64 tmp, pclk = dispc_pclk_rate(); ++ ++ if (height > out_height) { ++ /* FIXME get real display PPL */ ++ unsigned int ppl = 800; ++ ++ tmp = pclk * height * out_width; ++ do_div(tmp, 2 * out_height * ppl); ++ fclk = tmp; ++ ++ if (height > 2 * out_height && ppl != out_width) { ++ tmp = pclk * (height - 2 * out_height) * out_width; ++ do_div(tmp, 2 * out_height * (ppl - out_width)); ++ fclk = max(fclk, (u32) tmp); ++ } ++ } ++ ++ if (width > out_width) { ++ tmp = pclk * width; ++ do_div(tmp, out_width); ++ fclk = max(fclk, (u32) tmp); ++ ++ if (color_mode == OMAP_DSS_COLOR_RGB24U) ++ fclk <<= 1; ++ } ++ ++ return fclk; ++} ++ ++static unsigned long calc_fclk(u16 width, u16 height, ++ u16 out_width, u16 out_height) ++{ ++ unsigned int hf, vf; ++ ++ /* ++ * FIXME how to determine the 'A' factor ++ * for the no downscaling case ? ++ */ ++ ++ if (width > 3 * out_width) ++ hf = 4; ++ else if (width > 2 * out_width) ++ hf = 3; ++ else if (width > out_width) ++ hf = 2; ++ else ++ hf = 1; ++ ++ if (height > out_height) ++ vf = 2; ++ else ++ vf = 1; ++ ++ /* FIXME venc pclk? */ ++ return dispc_pclk_rate() * vf * hf; ++} ++ ++void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out) ++{ ++ enable_clocks(1); ++ _dispc_set_channel_out(plane, channel_out); ++ enable_clocks(0); ++} ++ ++static int _dispc_setup_plane(enum omap_plane plane, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ enum omap_dss_rotation_type rotation_type, ++ u8 rotation, int mirror, ++ u8 global_alpha) ++{ ++ const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; ++ bool five_taps = 0; ++ bool fieldmode = 0; ++ int cconv = 0; ++ unsigned offset0, offset1; ++ s32 row_inc; ++ s32 pix_inc; ++ u16 frame_height = height; ++ unsigned int field_offset = 0; ++ ++ if (paddr == 0) ++ return -EINVAL; ++ ++ if (ilace && height == out_height) ++ fieldmode = 1; ++ ++ if (ilace) { ++ if (fieldmode) ++ height /= 2; ++ pos_y /= 2; ++ out_height /= 2; ++ ++ DSSDBG("adjusting for ilace: height %d, pos_y %d, " ++ "out_height %d\n", ++ height, pos_y, out_height); ++ } ++ ++ if (plane == OMAP_DSS_GFX) { ++ if (width != out_width || height != out_height) ++ return -EINVAL; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_RGB24P: ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ } else { ++ /* video plane */ ++ ++ unsigned long fclk = 0; ++ ++ if (out_width < width / maxdownscale || ++ out_width > width * 8) ++ return -EINVAL; ++ ++ if (out_height < height / maxdownscale || ++ out_height > height * 8) ++ return -EINVAL; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_RGB24P: ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_RGBX32: ++ break; ++ ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ if (plane == OMAP_DSS_VIDEO1) ++ return -EINVAL; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ cconv = 1; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ /* Must use 5-tap filter? */ ++ five_taps = height > out_height * 2; ++ ++ if (!five_taps) { ++ fclk = calc_fclk(width, height, ++ out_width, out_height); ++ ++ /* Try 5-tap filter if 3-tap fclk is too high */ ++ if (cpu_is_omap34xx() && height > out_height && ++ fclk > dispc_fclk_rate()) ++ five_taps = true; ++ } ++ ++ if (width > (2048 >> five_taps)) ++ return -EINVAL; ++ ++ if (five_taps) ++ fclk = calc_fclk_five_taps(width, height, ++ out_width, out_height, color_mode); ++ ++ DSSDBG("required fclk rate = %lu Hz\n", fclk); ++ DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); ++ ++ if (fclk > dispc_fclk_rate()) { ++ DSSERR("failed to set up scaling, " ++ "required fclk rate = %lu Hz, " ++ "current fclk rate = %lu Hz\n", ++ fclk, dispc_fclk_rate()); ++ return -EINVAL; ++ } ++ } ++ ++ if (ilace && !fieldmode) { ++ /* ++ * when downscaling the bottom field may have to start several ++ * source lines below the top field. Unfortunately ACCUI ++ * registers will only hold the fractional part of the offset ++ * so the integer part must be added to the base address of the ++ * bottom field. ++ */ ++ if (!height || height == out_height) ++ field_offset = 0; ++ else ++ field_offset = height / out_height / 2; ++ } ++ ++ /* Fields are independent but interleaved in memory. */ ++ if (fieldmode) ++ field_offset = 1; ++ ++ if (rotation_type == OMAP_DSS_ROT_DMA) ++ calc_dma_rotation_offset(rotation, mirror, ++ screen_width, width, frame_height, color_mode, ++ fieldmode, field_offset, ++ &offset0, &offset1, &row_inc, &pix_inc); ++ else ++ calc_vrfb_rotation_offset(rotation, mirror, ++ screen_width, width, frame_height, color_mode, ++ fieldmode, field_offset, ++ &offset0, &offset1, &row_inc, &pix_inc); ++ ++ DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", ++ offset0, offset1, row_inc, pix_inc); ++ ++ _dispc_set_color_mode(plane, color_mode); ++ ++ _dispc_set_plane_ba0(plane, paddr + offset0); ++ _dispc_set_plane_ba1(plane, paddr + offset1); ++ ++ _dispc_set_row_inc(plane, row_inc); ++ _dispc_set_pix_inc(plane, pix_inc); ++ ++ DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height, ++ out_width, out_height); ++ ++ _dispc_set_plane_pos(plane, pos_x, pos_y); ++ ++ _dispc_set_pic_size(plane, width, height); ++ ++ if (plane != OMAP_DSS_GFX) { ++ _dispc_set_scaling(plane, width, height, ++ out_width, out_height, ++ ilace, five_taps, fieldmode); ++ _dispc_set_vid_size(plane, out_width, out_height); ++ _dispc_set_vid_color_conv(plane, cconv); ++ } ++ ++ _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode); ++ ++ if (plane != OMAP_DSS_VIDEO1) ++ _dispc_setup_global_alpha(plane, global_alpha); ++ ++ return 0; ++} ++ ++static void _dispc_enable_plane(enum omap_plane plane, bool enable) ++{ ++ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); ++} ++ ++static void dispc_disable_isr(void *data, u32 mask) ++{ ++ struct completion *compl = data; ++ complete(compl); ++} ++ ++static void _enable_lcd_out(bool enable) ++{ ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); ++} ++ ++void dispc_enable_lcd_out(bool enable) ++{ ++ struct completion frame_done_completion; ++ bool is_on; ++ int r; ++ ++ enable_clocks(1); ++ ++ /* When we disable LCD output, we need to wait until frame is done. ++ * Otherwise the DSS is still working, and turning off the clocks ++ * prevents DSS from going to OFF mode */ ++ is_on = REG_GET(DISPC_CONTROL, 0, 0); ++ ++ if (!enable && is_on) { ++ init_completion(&frame_done_completion); ++ ++ r = omap_dispc_register_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_FRAMEDONE); ++ ++ if (r) ++ DSSERR("failed to register FRAMEDONE isr\n"); ++ } ++ ++ _enable_lcd_out(enable); ++ ++ if (!enable && is_on) { ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for FRAME DONE\n"); ++ ++ r = omap_dispc_unregister_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_FRAMEDONE); ++ ++ if (r) ++ DSSERR("failed to unregister FRAMEDONE isr\n"); ++ } ++ ++ enable_clocks(0); ++} ++ ++static void _enable_digit_out(bool enable) ++{ ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); ++} ++ ++void dispc_enable_digit_out(bool enable) ++{ ++ struct completion frame_done_completion; ++ int r; ++ ++ enable_clocks(1); ++ ++ if (REG_GET(DISPC_CONTROL, 1, 1) == enable) { ++ enable_clocks(0); ++ return; ++ } ++ ++ if (enable) { ++ unsigned long flags; ++ /* When we enable digit output, we'll get an extra digit ++ * sync lost interrupt, that we need to ignore */ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; ++ _omap_dispc_set_irqs(); ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ } ++ ++ /* When we disable digit output, we need to wait until fields are done. ++ * Otherwise the DSS is still working, and turning off the clocks ++ * prevents DSS from going to OFF mode. And when enabling, we need to ++ * wait for the extra sync losts */ ++ init_completion(&frame_done_completion); ++ ++ r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, ++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); ++ if (r) ++ DSSERR("failed to register EVSYNC isr\n"); ++ ++ _enable_digit_out(enable); ++ ++ /* XXX I understand from TRM that we should only wait for the ++ * current field to complete. But it seems we have to wait ++ * for both fields */ ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for EVSYNC\n"); ++ ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for EVSYNC\n"); ++ ++ r = omap_dispc_unregister_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); ++ if (r) ++ DSSERR("failed to unregister EVSYNC isr\n"); ++ ++ if (enable) { ++ unsigned long flags; ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; ++ dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); ++ _omap_dispc_set_irqs(); ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ } ++ ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal_polarity(bool act_high) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); ++ enable_clocks(0); ++} ++ ++void dispc_pck_free_enable(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifohandcheck(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); ++ enable_clocks(0); ++} ++ ++ ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type) ++{ ++ int mode; ++ ++ switch (type) { ++ case OMAP_DSS_LCD_DISPLAY_STN: ++ mode = 0; ++ break; ++ ++ case OMAP_DSS_LCD_DISPLAY_TFT: ++ mode = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); ++ enable_clocks(0); ++} ++ ++void dispc_set_loadmode(enum omap_dss_load_mode mode) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); ++ enable_clocks(0); ++} ++ ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ ++ enable_clocks(1); ++ dispc_write_reg(def_reg[channel], color); ++ enable_clocks(0); ++} ++ ++u32 dispc_get_default_color(enum omap_channel channel) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ u32 l; ++ ++ BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && ++ channel != OMAP_DSS_CHANNEL_LCD); ++ ++ enable_clocks(1); ++ l = dispc_read_reg(def_reg[channel]); ++ enable_clocks(0); ++ ++ return l; ++} ++ ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_trans_key_type type, ++ u32 trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); ++ ++ dispc_write_reg(tr_reg[ch], trans_key); ++ enable_clocks(0); ++} ++ ++void dispc_get_trans_key(enum omap_channel ch, ++ enum omap_dss_trans_key_type *type, ++ u32 *trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (type) { ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ *type = REG_GET(DISPC_CONFIG, 11, 11); ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ *type = REG_GET(DISPC_CONFIG, 13, 13); ++ else ++ BUG(); ++ } ++ ++ if (trans_key) ++ *trans_key = dispc_read_reg(tr_reg[ch]); ++ enable_clocks(0); ++} ++ ++void dispc_enable_trans_key(enum omap_channel ch, bool enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); ++ enable_clocks(0); ++} ++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); ++ enable_clocks(0); ++} ++bool dispc_alpha_blending_enabled(enum omap_channel ch) ++{ ++ bool enabled; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ enabled = REG_GET(DISPC_CONFIG, 18, 18); ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ enabled = REG_GET(DISPC_CONFIG, 18, 18); ++ else ++ BUG(); ++ enable_clocks(0); ++ ++ return enabled; ++ ++} ++ ++ ++bool dispc_trans_key_enabled(enum omap_channel ch) ++{ ++ bool enabled; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ enabled = REG_GET(DISPC_CONFIG, 10, 10); ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ enabled = REG_GET(DISPC_CONFIG, 12, 12); ++ else ++ BUG(); ++ enable_clocks(0); ++ ++ return enabled; ++} ++ ++ ++void dispc_set_tft_data_lines(u8 data_lines) ++{ ++ int code; ++ ++ switch (data_lines) { ++ case 12: ++ code = 0; ++ break; ++ case 16: ++ code = 1; ++ break; ++ case 18: ++ code = 2; ++ break; ++ case 24: ++ code = 3; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); ++ enable_clocks(0); ++} ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) ++{ ++ u32 l; ++ int stallmode; ++ int gpout0 = 1; ++ int gpout1; ++ ++ switch (mode) { ++ case OMAP_DSS_PARALLELMODE_BYPASS: ++ stallmode = 0; ++ gpout1 = 1; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_RFBI: ++ stallmode = 1; ++ gpout1 = 0; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_DSI: ++ stallmode = 1; ++ gpout1 = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ ++ l = dispc_read_reg(DISPC_CONTROL); ++ ++ l = FLD_MOD(l, stallmode, 11, 11); ++ l = FLD_MOD(l, gpout0, 15, 15); ++ l = FLD_MOD(l, gpout1, 16, 16); ++ ++ dispc_write_reg(DISPC_CONTROL, l); ++ ++ enable_clocks(0); ++} ++ ++static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp, ++ int vsw, int vfp, int vbp) ++{ ++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { ++ if (hsw < 1 || hsw > 64 || ++ hfp < 1 || hfp > 256 || ++ hbp < 1 || hbp > 256 || ++ vsw < 1 || vsw > 64 || ++ vfp < 0 || vfp > 255 || ++ vbp < 0 || vbp > 255) ++ return false; ++ } else { ++ if (hsw < 1 || hsw > 256 || ++ hfp < 1 || hfp > 4096 || ++ hbp < 1 || hbp > 4096 || ++ vsw < 1 || vsw > 256 || ++ vfp < 0 || vfp > 4095 || ++ vbp < 0 || vbp > 4095) ++ return false; ++ } ++ ++ return true; ++} ++ ++bool dispc_lcd_timings_ok(struct omap_video_timings *timings) ++{ ++ return _dispc_lcd_timings_ok(timings->hsw, timings->hfp, ++ timings->hbp, timings->vsw, ++ timings->vfp, timings->vbp); ++} ++ ++static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, ++ int vsw, int vfp, int vbp) ++{ ++ u32 timing_h, timing_v; ++ ++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { ++ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | ++ FLD_VAL(hbp-1, 27, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | ++ FLD_VAL(vbp, 27, 20); ++ } else { ++ timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | ++ FLD_VAL(hbp-1, 31, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | ++ FLD_VAL(vbp, 31, 20); ++ } ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_TIMING_H, timing_h); ++ dispc_write_reg(DISPC_TIMING_V, timing_v); ++ enable_clocks(0); ++} ++ ++/* change name to mode? */ ++void dispc_set_lcd_timings(struct omap_video_timings *timings) ++{ ++ unsigned xtot, ytot; ++ unsigned long ht, vt; ++ ++ if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp, ++ timings->hbp, timings->vsw, ++ timings->vfp, timings->vbp)) ++ BUG(); ++ ++ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ dispc_set_lcd_size(timings->x_res, timings->y_res); ++ ++ xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; ++ ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; ++ ++ ht = (timings->pixel_clock * 1000) / xtot; ++ vt = (timings->pixel_clock * 1000) / xtot / ytot; ++ ++ DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); ++ DSSDBG("pck %u\n", timings->pixel_clock); ++ DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", ++ timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); ++} ++ ++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div) ++{ ++ BUG_ON(lck_div < 1); ++ BUG_ON(pck_div < 2); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_DIVISOR, ++ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); ++ enable_clocks(0); ++} ++ ++static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) ++{ ++ u32 l; ++ l = dispc_read_reg(DISPC_DIVISOR); ++ *lck_div = FLD_GET(l, 23, 16); ++ *pck_div = FLD_GET(l, 7, 0); ++} ++ ++unsigned long dispc_fclk_rate(void) ++{ ++ unsigned long r = 0; ++ ++ if (dss_get_dispc_clk_source() == 0) ++ r = dss_clk_get_rate(DSS_CLK_FCK1); ++ else ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_get_dsi1_pll_rate(); ++#else ++ BUG(); ++#endif ++ return r; ++} ++ ++unsigned long dispc_lclk_rate(void) ++{ ++ int lcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd; ++} ++ ++unsigned long dispc_pclk_rate(void) ++{ ++ int lcd, pcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ pcd = FLD_GET(l, 7, 0); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd / pcd; ++} ++ ++void dispc_dump_clocks(struct seq_file *s) ++{ ++ int lcd, pcd; ++ ++ enable_clocks(1); ++ ++ dispc_get_lcd_divisor(&lcd, &pcd); ++ ++ seq_printf(s, "- dispc -\n"); ++ ++ seq_printf(s, "dispc fclk source = %s\n", ++ dss_get_dispc_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi1_pll_fclk"); ++ ++ seq_printf(s, "pixel clk = %lu / %d / %d = %lu\n", ++ dispc_fclk_rate(), ++ lcd, pcd, ++ dispc_pclk_rate()); ++ ++ enable_clocks(0); ++} ++ ++void dispc_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DISPC_REVISION); ++ DUMPREG(DISPC_SYSCONFIG); ++ DUMPREG(DISPC_SYSSTATUS); ++ DUMPREG(DISPC_IRQSTATUS); ++ DUMPREG(DISPC_IRQENABLE); ++ DUMPREG(DISPC_CONTROL); ++ DUMPREG(DISPC_CONFIG); ++ DUMPREG(DISPC_CAPABLE); ++ DUMPREG(DISPC_DEFAULT_COLOR0); ++ DUMPREG(DISPC_DEFAULT_COLOR1); ++ DUMPREG(DISPC_TRANS_COLOR0); ++ DUMPREG(DISPC_TRANS_COLOR1); ++ DUMPREG(DISPC_LINE_STATUS); ++ DUMPREG(DISPC_LINE_NUMBER); ++ DUMPREG(DISPC_TIMING_H); ++ DUMPREG(DISPC_TIMING_V); ++ DUMPREG(DISPC_POL_FREQ); ++ DUMPREG(DISPC_DIVISOR); ++ DUMPREG(DISPC_GLOBAL_ALPHA); ++ DUMPREG(DISPC_SIZE_DIG); ++ DUMPREG(DISPC_SIZE_LCD); ++ ++ DUMPREG(DISPC_GFX_BA0); ++ DUMPREG(DISPC_GFX_BA1); ++ DUMPREG(DISPC_GFX_POSITION); ++ DUMPREG(DISPC_GFX_SIZE); ++ DUMPREG(DISPC_GFX_ATTRIBUTES); ++ DUMPREG(DISPC_GFX_FIFO_THRESHOLD); ++ DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS); ++ DUMPREG(DISPC_GFX_ROW_INC); ++ DUMPREG(DISPC_GFX_PIXEL_INC); ++ DUMPREG(DISPC_GFX_WINDOW_SKIP); ++ DUMPREG(DISPC_GFX_TABLE_BA); ++ ++ DUMPREG(DISPC_DATA_CYCLE1); ++ DUMPREG(DISPC_DATA_CYCLE2); ++ DUMPREG(DISPC_DATA_CYCLE3); ++ ++ DUMPREG(DISPC_CPR_COEF_R); ++ DUMPREG(DISPC_CPR_COEF_G); ++ DUMPREG(DISPC_CPR_COEF_B); ++ ++ DUMPREG(DISPC_GFX_PRELOAD); ++ ++ DUMPREG(DISPC_VID_BA0(0)); ++ DUMPREG(DISPC_VID_BA1(0)); ++ DUMPREG(DISPC_VID_POSITION(0)); ++ DUMPREG(DISPC_VID_SIZE(0)); ++ DUMPREG(DISPC_VID_ATTRIBUTES(0)); ++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(0)); ++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0)); ++ DUMPREG(DISPC_VID_ROW_INC(0)); ++ DUMPREG(DISPC_VID_PIXEL_INC(0)); ++ DUMPREG(DISPC_VID_FIR(0)); ++ DUMPREG(DISPC_VID_PICTURE_SIZE(0)); ++ DUMPREG(DISPC_VID_ACCU0(0)); ++ DUMPREG(DISPC_VID_ACCU1(0)); ++ ++ DUMPREG(DISPC_VID_BA0(1)); ++ DUMPREG(DISPC_VID_BA1(1)); ++ DUMPREG(DISPC_VID_POSITION(1)); ++ DUMPREG(DISPC_VID_SIZE(1)); ++ DUMPREG(DISPC_VID_ATTRIBUTES(1)); ++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(1)); ++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1)); ++ DUMPREG(DISPC_VID_ROW_INC(1)); ++ DUMPREG(DISPC_VID_PIXEL_INC(1)); ++ DUMPREG(DISPC_VID_FIR(1)); ++ DUMPREG(DISPC_VID_PICTURE_SIZE(1)); ++ DUMPREG(DISPC_VID_ACCU0(1)); ++ DUMPREG(DISPC_VID_ACCU1(1)); ++ ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 7)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 0)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 1)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 2)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 3)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 7)); ++ ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 7)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 0)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 1)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 2)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 3)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 7)); ++ ++ DUMPREG(DISPC_VID_PRELOAD(0)); ++ DUMPREG(DISPC_VID_PRELOAD(1)); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc, ++ bool ihs, bool ivs, u8 acbi, u8 acb) ++{ ++ u32 l = 0; ++ ++ DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", ++ onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); ++ ++ l |= FLD_VAL(onoff, 17, 17); ++ l |= FLD_VAL(rf, 16, 16); ++ l |= FLD_VAL(ieo, 15, 15); ++ l |= FLD_VAL(ipc, 14, 14); ++ l |= FLD_VAL(ihs, 13, 13); ++ l |= FLD_VAL(ivs, 12, 12); ++ l |= FLD_VAL(acbi, 11, 8); ++ l |= FLD_VAL(acb, 7, 0); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_POL_FREQ, l); ++ enable_clocks(0); ++} ++ ++void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb) ++{ ++ _dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0, ++ (config & OMAP_DSS_LCD_RF) != 0, ++ (config & OMAP_DSS_LCD_IEO) != 0, ++ (config & OMAP_DSS_LCD_IPC) != 0, ++ (config & OMAP_DSS_LCD_IHS) != 0, ++ (config & OMAP_DSS_LCD_IVS) != 0, ++ acbi, acb); ++} ++ ++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck, ++ u16 *lck_div, u16 *pck_div) ++{ ++ u16 pcd_min = is_tft ? 2 : 3; ++ unsigned long best_pck; ++ u16 best_ld, cur_ld; ++ u16 best_pd, cur_pd; ++ ++ best_pck = 0; ++ best_ld = 0; ++ best_pd = 0; ++ ++ for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { ++ unsigned long lck = fck / cur_ld; ++ ++ for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { ++ unsigned long pck = lck / cur_pd; ++ long old_delta = abs(best_pck - req_pck); ++ long new_delta = abs(pck - req_pck); ++ ++ if (best_pck == 0 || new_delta < old_delta) { ++ best_pck = pck; ++ best_ld = cur_ld; ++ best_pd = cur_pd; ++ ++ if (pck == req_pck) ++ goto found; ++ } ++ ++ if (pck < req_pck) ++ break; ++ } ++ ++ if (lck / pcd_min < req_pck) ++ break; ++ } ++ ++found: ++ *lck_div = best_ld; ++ *pck_div = best_pd; ++} ++ ++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ struct dispc_clock_info cur, best; ++ int match = 0; ++ int min_fck_per_pck; ++ unsigned long fck_rate = dss_clk_get_rate(DSS_CLK_FCK1); ++ ++ if (cpu_is_omap34xx()) ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ else ++ prate = 0; ++ ++ if (req_pck == dispc.cache_req_pck && ++ ((cpu_is_omap34xx() && prate == dispc.cache_prate) || ++ dispc.cache_cinfo.fck == fck_rate)) { ++ DSSDBG("dispc clock info found from cache.\n"); ++ *cinfo = dispc.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++retry: ++ memset(&cur, 0, sizeof(cur)); ++ memset(&best, 0, sizeof(best)); ++ ++ if (cpu_is_omap24xx()) { ++ /* XXX can we change the clock on omap2? */ ++ cur.fck = dss_clk_get_rate(DSS_CLK_FCK1); ++ cur.fck_div = 1; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ best = cur; ++ ++ goto found; ++ } else if (cpu_is_omap34xx()) { ++ for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) { ++ cur.fck = prate / cur.fck_div * 2; ++ ++ if (cur.fck > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.fck < req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } else { ++ BUG(); ++ } ++ ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dispc.cache_req_pck = req_pck; ++ dispc.cache_prate = prate; ++ dispc.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dispc_set_clock_div(struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ int r; ++ ++ if (cpu_is_omap34xx()) { ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ DSSDBG("dpll4_m4 = %ld\n", prate); ++ } ++ ++ DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); ++ DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div); ++ DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div); ++ ++ if (cpu_is_omap34xx()) { ++ r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div); ++ if (r) ++ return r; ++ } ++ ++ dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); ++ ++ return 0; ++} ++ ++int dispc_get_clock_div(struct dispc_clock_info *cinfo) ++{ ++ cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1); ++ ++ if (cpu_is_omap34xx()) { ++ unsigned long prate; ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ cinfo->fck_div = prate / (cinfo->fck / 2); ++ } else { ++ cinfo->fck_div = 0; ++ } ++ ++ cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16); ++ cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0); ++ ++ cinfo->lck = cinfo->fck / cinfo->lck_div; ++ cinfo->pck = cinfo->lck / cinfo->pck_div; ++ ++ return 0; ++} ++ ++/* dispc.irq_lock has to be locked by the caller */ ++static void _omap_dispc_set_irqs(void) ++{ ++ u32 mask; ++ u32 old_mask; ++ int i; ++ struct omap_dispc_isr_data *isr_data; ++ ++ mask = dispc.irq_error_mask; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (isr_data->isr == NULL) ++ continue; ++ ++ mask |= isr_data->mask; ++ } ++ ++ enable_clocks(1); ++ ++ old_mask = dispc_read_reg(DISPC_IRQENABLE); ++ /* clear the irqstatus for newly enabled irqs */ ++ dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask); ++ ++ dispc_write_reg(DISPC_IRQENABLE, mask); ++ ++ enable_clocks(0); ++} ++ ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ int ret; ++ unsigned long flags; ++ struct omap_dispc_isr_data *isr_data; ++ ++ if (isr == NULL) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ /* check for duplicate entry */ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ if (isr_data->isr == isr && isr_data->arg == arg && ++ isr_data->mask == mask) { ++ ret = -EINVAL; ++ goto err; ++ } ++ } ++ ++ isr_data = NULL; ++ ret = -EBUSY; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (isr_data->isr != NULL) ++ continue; ++ ++ isr_data->isr = isr; ++ isr_data->arg = arg; ++ isr_data->mask = mask; ++ ret = 0; ++ ++ break; ++ } ++ ++ _omap_dispc_set_irqs(); ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ return 0; ++err: ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_register_isr); ++ ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ unsigned long flags; ++ int ret = -EINVAL; ++ struct omap_dispc_isr_data *isr_data; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ if (isr_data->isr != isr || isr_data->arg != arg || ++ isr_data->mask != mask) ++ continue; ++ ++ /* found the correct isr */ ++ ++ isr_data->isr = NULL; ++ isr_data->arg = NULL; ++ isr_data->mask = 0; ++ ++ ret = 0; ++ break; ++ } ++ ++ if (ret == 0) ++ _omap_dispc_set_irqs(); ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_unregister_isr); ++ ++#ifdef DEBUG ++static void print_irq_status(u32 status) ++{ ++ if ((status & dispc.irq_error_mask) == 0) ++ return; ++ ++ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DISPC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(GFX_FIFO_UNDERFLOW); ++ PIS(OCP_ERR); ++ PIS(VID1_FIFO_UNDERFLOW); ++ PIS(VID2_FIFO_UNDERFLOW); ++ PIS(SYNC_LOST); ++ PIS(SYNC_LOST_DIGIT); ++#undef PIS ++ ++ printk("\n"); ++} ++#endif ++ ++/* Called from dss.c. Note that we don't touch clocks here, ++ * but we presume they are on because we got an IRQ. However, ++ * an irq handler may turn the clocks off, so we may not have ++ * clock later in the function. */ ++void dispc_irq_handler(void) ++{ ++ int i; ++ u32 irqstatus; ++ u32 handledirqs = 0; ++ u32 unhandled_errors; ++ struct omap_dispc_isr_data *isr_data; ++ struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; ++ ++ spin_lock(&dispc.irq_lock); ++ ++ irqstatus = dispc_read_reg(DISPC_IRQSTATUS); ++ ++#ifdef DEBUG ++ if (dss_debug) ++ print_irq_status(irqstatus); ++#endif ++ /* Ack the interrupt. Do it here before clocks are possibly turned ++ * off */ ++ dispc_write_reg(DISPC_IRQSTATUS, irqstatus); ++ ++ /* make a copy and unlock, so that isrs can unregister ++ * themselves */ ++ memcpy(registered_isr, dispc.registered_isr, ++ sizeof(registered_isr)); ++ ++ spin_unlock(&dispc.irq_lock); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = ®istered_isr[i]; ++ ++ if (!isr_data->isr) ++ continue; ++ ++ if (isr_data->mask & irqstatus) { ++ isr_data->isr(isr_data->arg, irqstatus); ++ handledirqs |= isr_data->mask; ++ } ++ } ++ ++ spin_lock(&dispc.irq_lock); ++ ++ unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; ++ ++ if (unhandled_errors) { ++ dispc.error_irqs |= unhandled_errors; ++ ++ dispc.irq_error_mask &= ~unhandled_errors; ++ _omap_dispc_set_irqs(); ++ ++ schedule_work(&dispc.error_work); ++ } ++ ++ spin_unlock(&dispc.irq_lock); ++} ++ ++static void dispc_error_worker(struct work_struct *work) ++{ ++ int i; ++ u32 errors; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ errors = dispc.error_irqs; ++ dispc.error_irqs = 0; ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { ++ DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 0) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { ++ DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 1) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { ++ DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 2) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_SYNC_LOST) { ++ struct omap_overlay_manager *manager = NULL; ++ bool enable = false; ++ ++ DSSERR("SYNC_LOST, disabling LCD\n"); ++ ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->id == OMAP_DSS_CHANNEL_LCD) { ++ manager = mgr; ++ enable = mgr->device->state == ++ OMAP_DSS_DISPLAY_ACTIVE; ++ mgr->device->disable(mgr->device); ++ break; ++ } ++ } ++ ++ if (manager) { ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id != 0 && ovl->manager == manager) ++ dispc_enable_plane(ovl->id, 0); ++ } ++ ++ dispc_go(manager->id); ++ mdelay(50); ++ if (enable) ++ manager->device->enable(manager->device); ++ } ++ } ++ ++ if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { ++ struct omap_overlay_manager *manager = NULL; ++ bool enable = false; ++ ++ DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); ++ ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { ++ manager = mgr; ++ enable = mgr->device->state == ++ OMAP_DSS_DISPLAY_ACTIVE; ++ mgr->device->disable(mgr->device); ++ break; ++ } ++ } ++ ++ if (manager) { ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id != 0 && ovl->manager == manager) ++ dispc_enable_plane(ovl->id, 0); ++ } ++ ++ dispc_go(manager->id); ++ mdelay(50); ++ if (enable) ++ manager->device->enable(manager->device); ++ } ++ } ++ ++ if (errors & DISPC_IRQ_OCP_ERR) { ++ DSSERR("OCP_ERR\n"); ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) ++ mgr->device->disable(mgr->device); ++ } ++ } ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ dispc.irq_error_mask |= errors; ++ _omap_dispc_set_irqs(); ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++} ++ ++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) ++{ ++ void dispc_irq_wait_handler(void *data, u32 mask) ++ { ++ complete((struct completion *)data); ++ } ++ ++ int r; ++ DECLARE_COMPLETION_ONSTACK(completion); ++ ++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, ++ irqmask); ++ ++ if (r) ++ return r; ++ ++ timeout = wait_for_completion_timeout(&completion, timeout); ++ ++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); ++ ++ if (timeout == 0) ++ return -ETIMEDOUT; ++ ++ if (timeout == -ERESTARTSYS) ++ return -ERESTARTSYS; ++ ++ return 0; ++} ++ ++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, ++ unsigned long timeout) ++{ ++ void dispc_irq_wait_handler(void *data, u32 mask) ++ { ++ complete((struct completion *)data); ++ } ++ ++ int r; ++ DECLARE_COMPLETION_ONSTACK(completion); ++ ++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, ++ irqmask); ++ ++ if (r) ++ return r; ++ ++ timeout = wait_for_completion_interruptible_timeout(&completion, ++ timeout); ++ ++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); ++ ++ if (timeout == 0) ++ return -ETIMEDOUT; ++ ++ if (timeout == -ERESTARTSYS) ++ return -ERESTARTSYS; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++void dispc_fake_vsync_irq(void) ++{ ++ u32 irqstatus = DISPC_IRQ_VSYNC; ++ int i; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ struct omap_dispc_isr_data *isr_data; ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (!isr_data->isr) ++ continue; ++ ++ if (isr_data->mask & irqstatus) ++ isr_data->isr(isr_data->arg, irqstatus); ++ } ++} ++#endif ++ ++static void _omap_dispc_initialize_irq(void) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); ++ ++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; ++ ++ /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, ++ * so clear it */ ++ dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); ++ ++ _omap_dispc_set_irqs(); ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++} ++ ++void dispc_enable_sidle(void) ++{ ++ REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ ++} ++ ++void dispc_disable_sidle(void) ++{ ++ REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ ++} ++ ++static void _omap_dispc_initial_config(void) ++{ ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_SYSCONFIG); ++ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ ++ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ ++ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ ++ l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ ++ dispc_write_reg(DISPC_SYSCONFIG, l); ++ ++ /* FUNCGATED */ ++ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); ++ ++ /* L3 firewall setting: enable access to OCM RAM */ ++ if (cpu_is_omap24xx()) ++ __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); ++ ++ _dispc_setup_color_conv_coef(); ++ ++ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); ++ ++ dispc_read_plane_fifo_sizes(); ++} ++ ++int dispc_init(void) ++{ ++ u32 rev; ++ ++ spin_lock_init(&dispc.irq_lock); ++ ++ INIT_WORK(&dispc.error_work, dispc_error_worker); ++ ++ dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); ++ if (!dispc.base) { ++ DSSERR("can't ioremap DISPC\n"); ++ return -ENOMEM; ++ } ++ ++ if (cpu_is_omap34xx()) { ++ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); ++ if (IS_ERR(dispc.dpll4_m4_ck)) { ++ DSSERR("Failed to get dpll4_m4_ck\n"); ++ return -ENODEV; ++ } ++ } ++ ++ enable_clocks(1); ++ ++ _omap_dispc_initial_config(); ++ ++ _omap_dispc_initialize_irq(); ++ ++ dispc_save_context(); ++ ++ rev = dispc_read_reg(DISPC_REVISION); ++ printk(KERN_INFO "OMAP DISPC rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dispc_exit(void) ++{ ++ if (cpu_is_omap34xx()) ++ clk_put(dispc.dpll4_m4_ck); ++ iounmap(dispc.base); ++} ++ ++int dispc_enable_plane(enum omap_plane plane, bool enable) ++{ ++ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); ++ ++ enable_clocks(1); ++ _dispc_enable_plane(plane, enable); ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++int dispc_setup_plane(enum omap_plane plane, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ enum omap_dss_rotation_type rotation_type, ++ u8 rotation, bool mirror, u8 global_alpha) ++{ ++ int r = 0; ++ ++ DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> " ++ "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n", ++ plane, paddr, screen_width, pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ ilace, color_mode, ++ rotation, mirror); ++ ++ enable_clocks(1); ++ ++ r = _dispc_setup_plane(plane, ++ paddr, screen_width, ++ pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ color_mode, ilace, ++ rotation_type, ++ rotation, mirror, ++ global_alpha); ++ ++ enable_clocks(0); ++ ++ return r; ++} +diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c +new file mode 100644 +index 0000000..6b5d0cf +--- /dev/null ++++ b/drivers/video/omap2/dss/display.c +@@ -0,0 +1,658 @@ ++/* ++ * linux/drivers/video/omap2/dss/display.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPLAY" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/jiffies.h> ++#include <linux/list.h> ++#include <linux/platform_device.h> ++ ++#include <mach/display.h> ++#include "dss.h" ++ ++static LIST_HEAD(display_list); ++ ++static ssize_t display_enabled_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED; ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", enabled); ++} ++ ++static ssize_t display_enabled_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ bool enabled, r; ++ ++ enabled = simple_strtoul(buf, NULL, 10); ++ ++ if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) { ++ if (enabled) { ++ r = dssdev->enable(dssdev); ++ if (r) ++ return r; ++ } else { ++ dssdev->disable(dssdev); ++ } ++ } ++ ++ return size; ++} ++ ++static ssize_t display_upd_mode_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO; ++ if (dssdev->get_update_mode) ++ mode = dssdev->get_update_mode(dssdev); ++ return snprintf(buf, PAGE_SIZE, "%d\n", mode); ++} ++ ++static ssize_t display_upd_mode_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ int val, r; ++ enum omap_dss_update_mode mode; ++ ++ val = simple_strtoul(buf, NULL, 10); ++ ++ switch (val) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ case OMAP_DSS_UPDATE_AUTO: ++ case OMAP_DSS_UPDATE_MANUAL: ++ mode = (enum omap_dss_update_mode)val; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ r = dssdev->set_update_mode(dssdev, mode); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_tear_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ dssdev->get_te ? dssdev->get_te(dssdev) : 0); ++} ++ ++static ssize_t display_tear_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ unsigned long te; ++ int r; ++ ++ if (!dssdev->enable_te || !dssdev->get_te) ++ return -ENOENT; ++ ++ te = simple_strtoul(buf, NULL, 0); ++ ++ r = dssdev->enable_te(dssdev, te); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_timings_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct omap_video_timings t; ++ ++ if (!dssdev->get_timings) ++ return -ENOENT; ++ ++ dssdev->get_timings(dssdev, &t); ++ ++ return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n", ++ t.pixel_clock, ++ t.x_res, t.hfp, t.hbp, t.hsw, ++ t.y_res, t.vfp, t.vbp, t.vsw); ++} ++ ++static ssize_t display_timings_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ struct omap_video_timings t; ++ int r, found; ++ ++ if (!dssdev->set_timings || !dssdev->check_timings) ++ return -ENOENT; ++ ++ found = 0; ++#ifdef CONFIG_OMAP2_DSS_VENC ++ if (strncmp("pal", buf, 3) == 0) { ++ t = omap_dss_pal_timings; ++ found = 1; ++ } else if (strncmp("ntsc", buf, 4) == 0) { ++ t = omap_dss_ntsc_timings; ++ found = 1; ++ } ++#endif ++ if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu", ++ &t.pixel_clock, ++ &t.x_res, &t.hfp, &t.hbp, &t.hsw, ++ &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9) ++ return -EINVAL; ++ ++ r = dssdev->check_timings(dssdev, &t); ++ if (r) ++ return r; ++ ++ dssdev->set_timings(dssdev, &t); ++ ++ return size; ++} ++ ++static ssize_t display_rotate_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ int rotate; ++ if (!dssdev->get_rotate) ++ return -ENOENT; ++ rotate = dssdev->get_rotate(dssdev); ++ return snprintf(buf, PAGE_SIZE, "%u\n", rotate); ++} ++ ++static ssize_t display_rotate_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ unsigned long rot; ++ int r; ++ ++ if (!dssdev->set_rotate || !dssdev->get_rotate) ++ return -ENOENT; ++ ++ rot = simple_strtoul(buf, NULL, 0); ++ ++ r = dssdev->set_rotate(dssdev, rot); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_mirror_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ int mirror; ++ if (!dssdev->get_mirror) ++ return -ENOENT; ++ mirror = dssdev->get_mirror(dssdev); ++ return snprintf(buf, PAGE_SIZE, "%u\n", mirror); ++} ++ ++static ssize_t display_mirror_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ unsigned long mirror; ++ int r; ++ ++ if (!dssdev->set_mirror || !dssdev->get_mirror) ++ return -ENOENT; ++ ++ mirror = simple_strtoul(buf, NULL, 0); ++ ++ r = dssdev->set_mirror(dssdev, mirror); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_wss_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ unsigned int wss; ++ ++ if (!dssdev->get_wss) ++ return -ENOENT; ++ ++ wss = dssdev->get_wss(dssdev); ++ ++ return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss); ++} ++ ++static ssize_t display_wss_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ unsigned long wss; ++ int r; ++ ++ if (!dssdev->get_wss || !dssdev->set_wss) ++ return -ENOENT; ++ ++ if (strict_strtoul(buf, 0, &wss)) ++ return -EINVAL; ++ ++ if (wss > 0xfffff) ++ return -EINVAL; ++ ++ r = dssdev->set_wss(dssdev, wss); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR, ++ display_enabled_show, display_enabled_store); ++static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR, ++ display_upd_mode_show, display_upd_mode_store); ++static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR, ++ display_tear_show, display_tear_store); ++static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR, ++ display_timings_show, display_timings_store); ++static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR, ++ display_rotate_show, display_rotate_store); ++static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR, ++ display_mirror_show, display_mirror_store); ++static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR, ++ display_wss_show, display_wss_store); ++ ++static struct device_attribute *display_sysfs_attrs[] = { ++ &dev_attr_enabled, ++ &dev_attr_update_mode, ++ &dev_attr_tear_elim, ++ &dev_attr_timings, ++ &dev_attr_rotate, ++ &dev_attr_mirror, ++ &dev_attr_wss, ++ NULL ++}; ++ ++static void default_get_resolution(struct omap_dss_device *dssdev, ++ u16 *xres, u16 *yres) ++{ ++ *xres = dssdev->panel.timings.x_res; ++ *yres = dssdev->panel.timings.y_res; ++} ++ ++void default_get_overlay_fifo_thresholds(enum omap_plane plane, ++ u32 fifo_size, enum omap_burst_size *burst_size, ++ u32 *fifo_low, u32 *fifo_high) ++{ ++ unsigned burst_size_bytes; ++ ++ *burst_size = OMAP_DSS_BURST_16x32; ++ burst_size_bytes = 16 * 32 / 8; ++ ++ *fifo_high = fifo_size - 1; ++ *fifo_low = fifo_size - burst_size_bytes; ++} ++ ++static int default_wait_vsync(struct omap_dss_device *dssdev) ++{ ++ unsigned long timeout = msecs_to_jiffies(500); ++ u32 irq; ++ ++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) ++ irq = DISPC_IRQ_EVSYNC_ODD; ++ else ++ irq = DISPC_IRQ_VSYNC; ++ ++ return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); ++} ++ ++static int default_get_recommended_bpp(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->panel.recommended_bpp) ++ return dssdev->panel.recommended_bpp; ++ ++ switch (dssdev->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ if (dssdev->phy.dpi.data_lines == 24) ++ return 24; ++ else ++ return 16; ++ ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ if (dssdev->ctrl.pixel_size == 24) ++ return 24; ++ else ++ return 16; ++ case OMAP_DISPLAY_TYPE_VENC: ++ case OMAP_DISPLAY_TYPE_SDI: ++ return 24; ++ return 24; ++ default: ++ BUG(); ++ } ++} ++ ++/* Checks if replication logic should be used. Only use for active matrix, ++ * when overlay is in RGB12U or RGB16 mode, and LCD interface is ++ * 18bpp or 24bpp */ ++bool dss_use_replication(struct omap_dss_device *dssdev, ++ enum omap_color_mode mode) ++{ ++ int bpp; ++ ++ if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16) ++ return false; ++ ++ if (dssdev->type == OMAP_DISPLAY_TYPE_DPI && ++ (dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0) ++ return false; ++ ++ switch (dssdev->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ bpp = dssdev->phy.dpi.data_lines; ++ break; ++ case OMAP_DISPLAY_TYPE_VENC: ++ case OMAP_DISPLAY_TYPE_SDI: ++ bpp = 24; ++ break; ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ bpp = dssdev->ctrl.pixel_size; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return bpp > 16; ++} ++ ++void dss_init_device(struct platform_device *pdev, ++ struct omap_dss_device *dssdev) ++{ ++ struct device_attribute *attr; ++ int i; ++ int r; ++ ++ switch (dssdev->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++#endif ++ break; ++ default: ++ DSSERR("Support for display '%s' not compiled in.\n", ++ dssdev->name); ++ return; ++ } ++ ++ dssdev->get_resolution = default_get_resolution; ++ dssdev->get_recommended_bpp = default_get_recommended_bpp; ++ dssdev->wait_vsync = default_wait_vsync; ++ ++ switch (dssdev->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ r = dpi_init_display(dssdev); ++ break; ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++ r = rfbi_init_display(dssdev); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++ r = venc_init_display(dssdev); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++ r = sdi_init_display(dssdev); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++ r = dsi_init_display(dssdev); ++ break; ++#endif ++ default: ++ BUG(); ++ } ++ ++ if (r) { ++ DSSERR("failed to init display %s\n", dssdev->name); ++ return; ++ } ++ ++ /* create device sysfs files */ ++ i = 0; ++ while ((attr = display_sysfs_attrs[i++]) != NULL) { ++ r = device_create_file(&dssdev->dev, attr); ++ if (r) ++ DSSERR("failed to create sysfs file\n"); ++ } ++ ++ /* create display? sysfs links */ ++ r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj, ++ dev_name(&dssdev->dev)); ++ if (r) ++ DSSERR("failed to create sysfs display link\n"); ++} ++ ++void dss_uninit_device(struct platform_device *pdev, ++ struct omap_dss_device *dssdev) ++{ ++ struct device_attribute *attr; ++ int i = 0; ++ ++ sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev)); ++ ++ while ((attr = display_sysfs_attrs[i++]) != NULL) ++ device_remove_file(&dssdev->dev, attr); ++ ++ if (dssdev->manager) ++ dssdev->manager->unset_device(dssdev->manager); ++} ++ ++static int dss_suspend_device(struct device *dev, void *data) ++{ ++ int r; ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ dssdev->activate_after_resume = false; ++ return 0; ++ } ++ ++ if (!dssdev->suspend) { ++ DSSERR("display '%s' doesn't implement suspend\n", ++ dssdev->name); ++ return -ENOSYS; ++ } ++ ++ r = dssdev->suspend(dssdev); ++ if (r) ++ return r; ++ ++ dssdev->activate_after_resume = true; ++ ++ return 0; ++} ++ ++int dss_suspend_all_devices(void) ++{ ++ int r; ++ struct bus_type *bus = dss_get_bus(); ++ ++ r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device); ++ if (r) { ++ /* resume all displays that were suspended */ ++ dss_resume_all_devices(); ++ return r; ++ } ++ ++ return 0; ++} ++ ++static int dss_resume_device(struct device *dev, void *data) ++{ ++ int r; ++ struct omap_dss_device *dssdev = to_dss_device(dev); ++ ++ if (dssdev->activate_after_resume && dssdev->resume) { ++ r = dssdev->resume(dssdev); ++ if (r) ++ return r; ++ } ++ ++ dssdev->activate_after_resume = false; ++ ++ return 0; ++} ++ ++int dss_resume_all_devices(void) ++{ ++ struct bus_type *bus = dss_get_bus(); ++ ++ return bus_for_each_dev(bus, NULL, NULL, dss_resume_device); ++} ++ ++ ++void omap_dss_get_device(struct omap_dss_device *dssdev) ++{ ++ get_device(&dssdev->dev); ++} ++EXPORT_SYMBOL(omap_dss_get_device); ++ ++void omap_dss_put_device(struct omap_dss_device *dssdev) ++{ ++ put_device(&dssdev->dev); ++} ++EXPORT_SYMBOL(omap_dss_put_device); ++ ++/* ref count of the found device is incremented. ref count ++ * of from-device is decremented. */ ++struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from) ++{ ++ struct device *dev; ++ struct device *dev_start = NULL; ++ struct omap_dss_device *dssdev = NULL; ++ ++ int match(struct device *dev, void *data) ++ { ++ /* skip panels connected to controllers */ ++ if (to_dss_device(dev)->panel.ctrl) ++ return 0; ++ ++ return 1; ++ } ++ ++ if (from) ++ dev_start = &from->dev; ++ dev = bus_find_device(dss_get_bus(), dev_start, NULL, match); ++ if (dev) ++ dssdev = to_dss_device(dev); ++ if (from) ++ put_device(&from->dev); ++ ++ return dssdev; ++} ++EXPORT_SYMBOL(omap_dss_get_next_device); ++ ++struct omap_dss_device *omap_dss_find_device(void *data, ++ int (*match)(struct omap_dss_device *dssdev, void *data)) ++{ ++ struct omap_dss_device *dssdev = NULL; ++ ++ while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) { ++ if (match(dssdev, data)) ++ return dssdev; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_find_device); ++ ++int omap_dss_start_device(struct omap_dss_device *dssdev) ++{ ++ int r; ++ ++ if (!dssdev->driver) { ++ DSSDBG("no driver\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) { ++ DSSDBG("no panel driver\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ if (!try_module_get(dssdev->dev.driver->owner)) { ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ if (dssdev->ctrl.panel) { ++ if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) { ++ r = -ENODEV; ++ goto err1; ++ } ++ } ++ ++ return 0; ++err1: ++ module_put(dssdev->dev.driver->owner); ++err0: ++ return r; ++} ++EXPORT_SYMBOL(omap_dss_start_device); ++ ++void omap_dss_stop_device(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->ctrl.panel) ++ module_put(dssdev->ctrl.panel->dev.driver->owner); ++ ++ module_put(dssdev->dev.driver->owner); ++} ++EXPORT_SYMBOL(omap_dss_stop_device); ++ +diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c +new file mode 100644 +index 0000000..b6543c8 +--- /dev/null ++++ b/drivers/video/omap2/dss/dpi.c +@@ -0,0 +1,388 @@ ++/* ++ * linux/drivers/video/omap2/dss/dpi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DPI" ++ ++#include <linux/kernel.h> ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/errno.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include <mach/cpu.h> ++ ++#include "dss.h" ++ ++static struct { ++ int update_enabled; ++} dpi; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, ++ unsigned long *fck, int *lck_div, int *pck_div) ++{ ++ struct dsi_clock_info cinfo; ++ int r; ++ ++ r = dsi_pll_calc_pck(is_tft, pck_req, &cinfo); ++ if (r) ++ return r; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ return r; ++ ++ dss_select_clk_source(0, 1); ++ ++ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div); ++ ++ *fck = cinfo.dsi1_pll_fclk; ++ *lck_div = cinfo.lck_div; ++ *pck_div = cinfo.pck_div; ++ ++ return 0; ++} ++#else ++static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, ++ unsigned long *fck, int *lck_div, int *pck_div) ++{ ++ struct dispc_clock_info cinfo; ++ int r; ++ ++ r = dispc_calc_clock_div(is_tft, pck_req, &cinfo); ++ if (r) ++ return r; ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) ++ return r; ++ ++ *fck = cinfo.fck; ++ *lck_div = cinfo.lck_div; ++ *pck_div = cinfo.pck_div; ++ ++ return 0; ++} ++#endif ++ ++static int dpi_set_mode(struct omap_dss_device *dssdev) ++{ ++ struct omap_video_timings *t = &dssdev->panel.timings; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ bool is_tft; ++ int r = 0; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, ++ dssdev->panel.acb); ++ ++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000, ++ &fck, &lck_div, &pck_div); ++#else ++ r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000, ++ &fck, &lck_div, &pck_div); ++#endif ++ if (r) ++ goto err0; ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != t->pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. " ++ "Requested %d kHz, got %lu kHz\n", ++ t->pixel_clock, pck); ++ ++ t->pixel_clock = pck; ++ } ++ ++ dispc_set_lcd_timings(t); ++ ++err0: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return r; ++} ++ ++static int dpi_basic_init(struct omap_dss_device *dssdev) ++{ ++ bool is_tft; ++ ++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : ++ OMAP_DSS_LCD_DISPLAY_STN); ++ dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines); ++ ++ return 0; ++} ++ ++static int dpi_display_enable(struct omap_dss_device *dssdev) ++{ ++ int r; ++ ++ r = omap_dss_start_device(dssdev); ++ if (r) { ++ DSSERR("failed to start device\n"); ++ goto err0; ++ } ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ r = -EINVAL; ++ goto err1; ++ } ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ r = dpi_basic_init(dssdev); ++ if (r) ++ goto err2; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_clk_enable(DSS_CLK_FCK2); ++ r = dsi_pll_init(0, 1); ++ if (r) ++ goto err3; ++#endif ++ r = dpi_set_mode(dssdev); ++ if (r) ++ goto err4; ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ r = dssdev->driver->enable(dssdev); ++ if (r) ++ goto err5; ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++ ++err5: ++ dispc_enable_lcd_out(0); ++err4: ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dsi_pll_uninit(); ++err3: ++ dss_clk_disable(DSS_CLK_FCK2); ++#endif ++err2: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++err1: ++ omap_dss_stop_device(dssdev); ++err0: ++ return r; ++} ++ ++static int dpi_display_resume(struct omap_dss_device *dssdev); ++ ++static void dpi_display_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ dpi_display_resume(dssdev); ++ ++ dssdev->driver->disable(dssdev); ++ ++ dispc_enable_lcd_out(0); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_select_clk_source(0, 0); ++ dsi_pll_uninit(); ++ dss_clk_disable(DSS_CLK_FCK2); ++#endif ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ omap_dss_stop_device(dssdev); ++} ++ ++static int dpi_display_suspend(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ DSSDBG("dpi_display_suspend\n"); ++ ++ if (dssdev->driver->suspend) ++ dssdev->driver->suspend(dssdev); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ DSSDBG("dpi_display_resume\n"); ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dssdev->driver->resume) ++ dssdev->driver->resume(dssdev); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void dpi_set_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("dpi_set_timings\n"); ++ dssdev->panel.timings = *timings; ++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { ++ dpi_set_mode(dssdev); ++ dispc_go(OMAP_DSS_CHANNEL_LCD); ++ } ++} ++ ++static int dpi_check_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ bool is_tft; ++ int r; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ ++ if (!dispc_lcd_timings_ok(timings)) ++ return -EINVAL; ++ ++ if (timings->pixel_clock == 0) ++ return -EINVAL; ++ ++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ { ++ struct dsi_clock_info cinfo; ++ r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.dsi1_pll_fclk; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#else ++ { ++ struct dispc_clock_info cinfo; ++ r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#endif ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ timings->pixel_clock = pck; ++ ++ return 0; ++} ++ ++static void dpi_get_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ *timings = dssdev->panel.timings; ++} ++ ++static int dpi_display_set_update_mode(struct omap_dss_device *dssdev, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ dpi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ dpi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode dpi_display_get_update_mode( ++ struct omap_dss_device *dssdev) ++{ ++ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++int dpi_init_display(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("init_display\n"); ++ ++ dssdev->enable = dpi_display_enable; ++ dssdev->disable = dpi_display_disable; ++ dssdev->suspend = dpi_display_suspend; ++ dssdev->resume = dpi_display_resume; ++ dssdev->set_timings = dpi_set_timings; ++ dssdev->check_timings = dpi_check_timings; ++ dssdev->get_timings = dpi_get_timings; ++ dssdev->set_update_mode = dpi_display_set_update_mode; ++ dssdev->get_update_mode = dpi_display_get_update_mode; ++ ++ return 0; ++} ++ ++int dpi_init(void) ++{ ++ return 0; ++} ++ ++void dpi_exit(void) ++{ ++} ++ +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +new file mode 100644 +index 0000000..d43b9ce +--- /dev/null ++++ b/drivers/video/omap2/dss/dsi.c +@@ -0,0 +1,3509 @@ ++/* ++ * linux/drivers/video/omap2/dss/dsi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DSI" ++ ++#include <linux/kernel.h> ++#include <linux/io.h> ++#include <linux/clk.h> ++#include <linux/device.h> ++#include <linux/err.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <linux/mutex.h> ++#include <linux/seq_file.h> ++#include <linux/platform_device.h> ++#include <linux/regulator/consumer.h> ++#include <linux/kthread.h> ++#include <linux/wait.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include <mach/clock.h> ++ ++#include "dss.h" ++ ++/*#define VERBOSE_IRQ*/ ++ ++#define DSI_BASE 0x4804FC00 ++ ++struct dsi_reg { u16 idx; }; ++ ++#define DSI_REG(idx) ((const struct dsi_reg) { idx }) ++ ++#define DSI_SZ_REGS SZ_1K ++/* DSI Protocol Engine */ ++ ++#define DSI_REVISION DSI_REG(0x0000) ++#define DSI_SYSCONFIG DSI_REG(0x0010) ++#define DSI_SYSSTATUS DSI_REG(0x0014) ++#define DSI_IRQSTATUS DSI_REG(0x0018) ++#define DSI_IRQENABLE DSI_REG(0x001C) ++#define DSI_CTRL DSI_REG(0x0040) ++#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) ++#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) ++#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) ++#define DSI_CLK_CTRL DSI_REG(0x0054) ++#define DSI_TIMING1 DSI_REG(0x0058) ++#define DSI_TIMING2 DSI_REG(0x005C) ++#define DSI_VM_TIMING1 DSI_REG(0x0060) ++#define DSI_VM_TIMING2 DSI_REG(0x0064) ++#define DSI_VM_TIMING3 DSI_REG(0x0068) ++#define DSI_CLK_TIMING DSI_REG(0x006C) ++#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) ++#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) ++#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) ++#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) ++#define DSI_VM_TIMING4 DSI_REG(0x0080) ++#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) ++#define DSI_VM_TIMING5 DSI_REG(0x0088) ++#define DSI_VM_TIMING6 DSI_REG(0x008C) ++#define DSI_VM_TIMING7 DSI_REG(0x0090) ++#define DSI_STOPCLK_TIMING DSI_REG(0x0094) ++#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) ++#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) ++#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) ++#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) ++#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) ++ ++/* DSIPHY_SCP */ ++ ++#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) ++#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) ++#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) ++#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) ++ ++/* DSI_PLL_CTRL_SCP */ ++ ++#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) ++#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) ++#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) ++#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) ++#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dsi_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) ++ ++/* Global interrupts */ ++#define DSI_IRQ_VC0 (1 << 0) ++#define DSI_IRQ_VC1 (1 << 1) ++#define DSI_IRQ_VC2 (1 << 2) ++#define DSI_IRQ_VC3 (1 << 3) ++#define DSI_IRQ_WAKEUP (1 << 4) ++#define DSI_IRQ_RESYNC (1 << 5) ++#define DSI_IRQ_PLL_LOCK (1 << 7) ++#define DSI_IRQ_PLL_UNLOCK (1 << 8) ++#define DSI_IRQ_PLL_RECALL (1 << 9) ++#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) ++#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) ++#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) ++#define DSI_IRQ_TE_TRIGGER (1 << 16) ++#define DSI_IRQ_ACK_TRIGGER (1 << 17) ++#define DSI_IRQ_SYNC_LOST (1 << 18) ++#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) ++#define DSI_IRQ_TA_TIMEOUT (1 << 20) ++#define DSI_IRQ_ERROR_MASK \ ++ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ ++ DSI_IRQ_TA_TIMEOUT) ++#define DSI_IRQ_CHANNEL_MASK 0xf ++ ++/* Virtual channel interrupts */ ++#define DSI_VC_IRQ_CS (1 << 0) ++#define DSI_VC_IRQ_ECC_CORR (1 << 1) ++#define DSI_VC_IRQ_PACKET_SENT (1 << 2) ++#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) ++#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) ++#define DSI_VC_IRQ_BTA (1 << 5) ++#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) ++#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) ++#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) ++#define DSI_VC_IRQ_ERROR_MASK \ ++ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ ++ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ ++ DSI_VC_IRQ_FIFO_TX_UDF) ++ ++/* ComplexIO interrupts */ ++#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) ++#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) ++#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) ++#define DSI_CIO_IRQ_ERRESC1 (1 << 5) ++#define DSI_CIO_IRQ_ERRESC2 (1 << 6) ++#define DSI_CIO_IRQ_ERRESC3 (1 << 7) ++#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) ++#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) ++#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) ++#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) ++#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) ++#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) ++ ++#define DSI_DT_DCS_SHORT_WRITE_0 0x05 ++#define DSI_DT_DCS_SHORT_WRITE_1 0x15 ++#define DSI_DT_DCS_READ 0x06 ++#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 ++#define DSI_DT_NULL_PACKET 0x09 ++#define DSI_DT_DCS_LONG_WRITE 0x39 ++ ++#define DSI_DT_RX_ACK_WITH_ERR 0x02 ++#define DSI_DT_RX_DCS_LONG_READ 0x1c ++#define DSI_DT_RX_SHORT_READ_1 0x21 ++#define DSI_DT_RX_SHORT_READ_2 0x22 ++ ++#define FINT_MAX 2100000 ++#define FINT_MIN 750000 ++#define REGN_MAX (1 << 7) ++#define REGM_MAX ((1 << 11) - 1) ++#define REGM3_MAX (1 << 4) ++#define REGM4_MAX (1 << 4) ++ ++enum fifo_size { ++ DSI_FIFO_SIZE_0 = 0, ++ DSI_FIFO_SIZE_32 = 1, ++ DSI_FIFO_SIZE_64 = 2, ++ DSI_FIFO_SIZE_96 = 3, ++ DSI_FIFO_SIZE_128 = 4, ++}; ++ ++enum dsi_vc_mode { ++ DSI_VC_MODE_L4 = 0, ++ DSI_VC_MODE_VP, ++}; ++ ++struct dsi_update_region { ++ bool dirty; ++ u16 x, y, w, h; ++ struct omap_dss_device *device; ++}; ++ ++static struct ++{ ++ void __iomem *base; ++ ++ unsigned long dsi1_pll_fclk; /* Hz */ ++ unsigned long dsi2_pll_fclk; /* Hz */ ++ unsigned long dsiphy; /* Hz */ ++ unsigned long ddr_clk; /* Hz */ ++ ++ struct regulator *vdds_dsi_reg; ++ ++ struct { ++ enum dsi_vc_mode mode; ++ struct omap_dss_device *dssdev; ++ enum fifo_size fifo_size; ++ int dest_per; /* destination peripheral 0-3 */ ++ } vc[4]; ++ ++ struct mutex lock; ++ struct mutex bus_lock; ++ ++ unsigned pll_locked; ++ ++ struct completion bta_completion; ++ ++ struct task_struct *thread; ++ wait_queue_head_t waitqueue; ++ ++ spinlock_t update_lock; ++ bool framedone_received; ++ struct dsi_update_region update_region; ++ struct dsi_update_region active_update_region; ++ struct completion update_completion; ++ ++ enum omap_dss_update_mode user_update_mode; ++ enum omap_dss_update_mode update_mode; ++ bool te_enabled; ++ bool use_ext_te; ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_clk_freq; ++ struct dsi_clock_info cache_cinfo; ++ ++ u32 errors; ++ spinlock_t errors_lock; ++#ifdef DEBUG ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++ ktime_t perf_start_time_auto; ++ int perf_measure_frames; ++#endif ++ int debug_read; ++ int debug_write; ++} dsi; ++ ++#ifdef DEBUG ++static unsigned int dsi_perf; ++module_param_named(dsi_perf, dsi_perf, bool, 0644); ++#endif ++ ++static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) ++{ ++ __raw_writel(val, dsi.base + idx.idx); ++} ++ ++static inline u32 dsi_read_reg(const struct dsi_reg idx) ++{ ++ return __raw_readl(dsi.base + idx.idx); ++} ++ ++ ++void dsi_save_context(void) ++{ ++} ++ ++void dsi_restore_context(void) ++{ ++} ++ ++void dsi_bus_lock(void) ++{ ++ mutex_lock(&dsi.bus_lock); ++} ++EXPORT_SYMBOL(dsi_bus_lock); ++ ++void dsi_bus_unlock(void) ++{ ++ mutex_unlock(&dsi.bus_lock); ++} ++EXPORT_SYMBOL(dsi_bus_unlock); ++ ++static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, ++ int value) ++{ ++ int t = 100000; ++ ++ while (REG_GET(idx, bitnum, bitnum) != value) { ++ if (--t == 0) ++ return !value; ++ } ++ ++ return value; ++} ++ ++#ifdef DEBUG ++static void dsi_perf_mark_setup(void) ++{ ++ dsi.perf_setup_time = ktime_get(); ++} ++ ++static void dsi_perf_mark_start(void) ++{ ++ dsi.perf_start_time = ktime_get(); ++} ++ ++static void dsi_perf_mark_start_auto(void) ++{ ++ dsi.perf_measure_frames = 0; ++ dsi.perf_start_time_auto = ktime_get(); ++} ++ ++static void dsi_perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ ++ if (!dsi_perf) ++ return; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, dsi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = dsi.active_update_region.w * ++ dsi.active_update_region.h * ++ dsi.active_update_region.device->ctrl.pixel_size / 8; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ static u32 s_total_trans_us, s_total_setup_us; ++ static u32 s_min_trans_us = 0xffffffff, s_min_setup_us; ++ static u32 s_max_trans_us, s_max_setup_us; ++ const int numframes = 100; ++ ktime_t total_time_auto; ++ u32 total_time_auto_us; ++ ++ dsi.perf_measure_frames++; ++ ++ if (setup_us < s_min_setup_us) ++ s_min_setup_us = setup_us; ++ ++ if (setup_us > s_max_setup_us) ++ s_max_setup_us = setup_us; ++ ++ s_total_setup_us += setup_us; ++ ++ if (trans_us < s_min_trans_us) ++ s_min_trans_us = trans_us; ++ ++ if (trans_us > s_max_trans_us) ++ s_max_trans_us = trans_us; ++ ++ s_total_trans_us += trans_us; ++ ++ if (dsi.perf_measure_frames < numframes) ++ return; ++ ++ total_time_auto = ktime_sub(t, dsi.perf_start_time_auto); ++ total_time_auto_us = (u32)ktime_to_us(total_time_auto); ++ ++ printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, " ++ "trans %u/%u/%u\n", ++ name, ++ 1000 * 1000 * numframes / total_time_auto_us, ++ s_min_setup_us, ++ s_max_setup_us, ++ s_total_setup_us / numframes, ++ s_min_trans_us, ++ s_max_trans_us, ++ s_total_trans_us / numframes); ++ ++ s_total_setup_us = 0; ++ s_min_setup_us = 0xffffffff; ++ s_max_setup_us = 0; ++ s_total_trans_us = 0; ++ s_min_trans_us = 0xffffffff; ++ s_max_trans_us = 0; ++ dsi_perf_mark_start_auto(); ++ } else { ++ printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " ++ "%u bytes, %u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++ } ++} ++#else ++#define dsi_perf_mark_setup() ++#define dsi_perf_mark_start() ++#define dsi_perf_mark_start_auto() ++#define dsi_perf_show(x) ++#endif ++ ++static void print_irq_status(u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_IRQ_##x) \ ++ printk(#x " "); ++#ifdef VERBOSE_IRQ ++ PIS(VC0); ++ PIS(VC1); ++ PIS(VC2); ++ PIS(VC3); ++#endif ++ PIS(WAKEUP); ++ PIS(RESYNC); ++ PIS(PLL_LOCK); ++ PIS(PLL_UNLOCK); ++ PIS(PLL_RECALL); ++ PIS(COMPLEXIO_ERR); ++ PIS(HS_TX_TIMEOUT); ++ PIS(LP_RX_TIMEOUT); ++ PIS(TE_TRIGGER); ++ PIS(ACK_TRIGGER); ++ PIS(SYNC_LOST); ++ PIS(LDO_POWER_GOOD); ++ PIS(TA_TIMEOUT); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static void print_irq_status_vc(int channel, u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); ++ ++#define PIS(x) \ ++ if (status & DSI_VC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(CS); ++ PIS(ECC_CORR); ++#ifdef VERBOSE_IRQ ++ PIS(PACKET_SENT); ++#endif ++ PIS(FIFO_TX_OVF); ++ PIS(FIFO_RX_OVF); ++ PIS(BTA); ++ PIS(ECC_NO_CORR); ++ PIS(FIFO_TX_UDF); ++ PIS(PP_BUSY_CHANGE); ++#undef PIS ++ printk("\n"); ++} ++ ++static void print_irq_status_cio(u32 status) ++{ ++ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_CIO_IRQ_##x) \ ++ printk(#x " "); ++ PIS(ERRSYNCESC1); ++ PIS(ERRSYNCESC2); ++ PIS(ERRSYNCESC3); ++ PIS(ERRESC1); ++ PIS(ERRESC2); ++ PIS(ERRESC3); ++ PIS(ERRCONTROL1); ++ PIS(ERRCONTROL2); ++ PIS(ERRCONTROL3); ++ PIS(STATEULPS1); ++ PIS(STATEULPS2); ++ PIS(STATEULPS3); ++ PIS(ERRCONTENTIONLP0_1); ++ PIS(ERRCONTENTIONLP1_1); ++ PIS(ERRCONTENTIONLP0_2); ++ PIS(ERRCONTENTIONLP1_2); ++ PIS(ERRCONTENTIONLP0_3); ++ PIS(ERRCONTENTIONLP1_3); ++ PIS(ULPSACTIVENOT_ALL0); ++ PIS(ULPSACTIVENOT_ALL1); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static int debug_irq; ++ ++/* called from dss */ ++void dsi_irq_handler(void) ++{ ++ u32 irqstatus, vcstatus, ciostatus; ++ int i; ++ ++ irqstatus = dsi_read_reg(DSI_IRQSTATUS); ++ ++ if (irqstatus & DSI_IRQ_ERROR_MASK) { ++ DSSERR("DSI error, irqstatus %x\n", irqstatus); ++ print_irq_status(irqstatus); ++ spin_lock(&dsi.errors_lock); ++ dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK; ++ spin_unlock(&dsi.errors_lock); ++ } else if (debug_irq) { ++ print_irq_status(irqstatus); ++ } ++ ++ for (i = 0; i < 4; ++i) { ++ if ((irqstatus & (1<<i)) == 0) ++ continue; ++ ++ vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); ++ ++ if (vcstatus & DSI_VC_IRQ_BTA) ++ complete(&dsi.bta_completion); ++ ++ if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { ++ DSSERR("DSI VC(%d) error, vc irqstatus %x\n", ++ i, vcstatus); ++ print_irq_status_vc(i, vcstatus); ++ } else if (debug_irq) { ++ print_irq_status_vc(i, vcstatus); ++ } ++ ++ dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); ++ } ++ ++ if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { ++ ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); ++ ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); ++ ++ DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); ++ print_irq_status_cio(ciostatus); ++ } ++ ++ dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); ++} ++ ++ ++static void _dsi_initialize_irq(void) ++{ ++ u32 l; ++ int i; ++ ++ /* disable all interrupts */ ++ dsi_write_reg(DSI_IRQENABLE, 0); ++ for (i = 0; i < 4; ++i) ++ dsi_write_reg(DSI_VC_IRQENABLE(i), 0); ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); ++ ++ /* clear interrupt status */ ++ l = dsi_read_reg(DSI_IRQSTATUS); ++ dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); ++ ++ for (i = 0; i < 4; ++i) { ++ l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); ++ dsi_write_reg(DSI_VC_IRQSTATUS(i), l); ++ } ++ ++ l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); ++ ++ /* enable error irqs */ ++ l = DSI_IRQ_ERROR_MASK; ++ dsi_write_reg(DSI_IRQENABLE, l); ++ ++ l = DSI_VC_IRQ_ERROR_MASK; ++ for (i = 0; i < 4; ++i) ++ dsi_write_reg(DSI_VC_IRQENABLE(i), l); ++ ++ /* XXX zonda responds incorrectly, causing control error: ++ Exit from LP-ESC mode to LP11 uses wrong transition states on the ++ data lines LP0 and LN0. */ ++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, ++ -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); ++} ++ ++static u32 dsi_get_errors(void) ++{ ++ unsigned long flags; ++ u32 e; ++ spin_lock_irqsave(&dsi.errors_lock, flags); ++ e = dsi.errors; ++ dsi.errors = 0; ++ spin_unlock_irqrestore(&dsi.errors_lock, flags); ++ return e; ++} ++ ++static void dsi_vc_enable_bta_irq(int channel) ++{ ++ u32 l; ++ ++ dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA); ++ ++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); ++ l |= DSI_VC_IRQ_BTA; ++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l); ++} ++ ++static void dsi_vc_disable_bta_irq(int channel) ++{ ++ u32 l; ++ ++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); ++ l &= ~DSI_VC_IRQ_BTA; ++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l); ++} ++ ++/* DSI func clock. this could also be DSI2_PLL_FCLK */ ++static inline void enable_clocks(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++/* source clock for DSI PLL. this could also be PCLKFREE */ ++static inline void dsi_enable_pll_clock(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_FCK2); ++ else ++ dss_clk_disable(DSS_CLK_FCK2); ++ ++ if (enable && dsi.pll_locked) { ++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) ++ DSSERR("cannot lock PLL when enabling clocks\n"); ++ } ++} ++ ++#ifdef DEBUG ++static void _dsi_print_reset_status(void) ++{ ++ u32 l; ++ ++ if (!dss_debug) ++ return; ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ l = dsi_read_reg(DSI_DSIPHY_CFG5); ++ ++ printk(KERN_DEBUG "DSI resets: "); ++ ++ l = dsi_read_reg(DSI_PLL_STATUS); ++ printk("PLL (%d) ", FLD_GET(l, 0, 0)); ++ ++ l = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ printk("CIO (%d) ", FLD_GET(l, 29, 29)); ++ ++ l = dsi_read_reg(DSI_DSIPHY_CFG5); ++ printk("PHY (%x, %d, %d, %d)\n", ++ FLD_GET(l, 28, 26), ++ FLD_GET(l, 29, 29), ++ FLD_GET(l, 30, 30), ++ FLD_GET(l, 31, 31)); ++} ++#else ++#define _dsi_print_reset_status() ++#endif ++ ++static inline int dsi_if_enable(bool enable) ++{ ++ DSSDBG("dsi_if_enable(%d)\n", enable); ++ ++ enable = enable ? 1 : 0; ++ REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ ++ ++ if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { ++ DSSERR("Failed to set dsi_if_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static unsigned long dsi_fclk_rate(void) ++{ ++ unsigned long r; ++ ++ if (dss_get_dsi_clk_source() == 0) { ++ /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ ++ r = dss_clk_get_rate(DSS_CLK_FCK1); ++ } else { ++ /* DSI FCLK source is DSI2_PLL_FCLK */ ++ r = dsi.dsi2_pll_fclk; ++ } ++ ++ return r; ++} ++ ++static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev) ++{ ++ unsigned n; ++ unsigned long dsi_fclk; ++ unsigned long lp_clk, lp_clk_req; ++ ++ dsi_fclk = dsi_fclk_rate(); ++ ++ lp_clk_req = dssdev->phy.dsi.lp_clk_hz; ++ ++ for (n = 1; n < (1 << 13) - 1; ++n) { ++ lp_clk = dsi_fclk / 2 / n; ++ if (lp_clk <= lp_clk_req) ++ break; ++ } ++ ++ if (n == (1 << 13) - 1) { ++ DSSERR("Failed to find LP_CLK_DIVISOR\n"); ++ return -EINVAL; ++ } ++ ++ DSSDBG("LP_CLK_DIV %u, LP_CLK %lu (req %lu)\n", n, lp_clk, lp_clk_req); ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, n, 12, 0); /* LP_CLK_DIVISOR */ ++ if (dsi_fclk > 30*1000*1000) ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ ++ ++ return 0; ++} ++ ++ ++enum dsi_pll_power_state { ++ DSI_PLL_POWER_OFF = 0x0, ++ DSI_PLL_POWER_ON_HSCLK = 0x1, ++ DSI_PLL_POWER_ON_ALL = 0x2, ++ DSI_PLL_POWER_ON_DIV = 0x3, ++}; ++ ++static int dsi_pll_power(enum dsi_pll_power_state state) ++{ ++ int t = 0; ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ ++ ++ /* PLL_PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("Failed to set DSI PLL power mode to %d\n", ++ state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ int min_fck_per_pck; ++ int match = 0; ++ unsigned long dss_clk_fck2; ++ ++ dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); ++ ++ if (req_pck == dsi.cache_req_pck && ++ dsi.cache_cinfo.clkin == dss_clk_fck2) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++ DSSDBG("dsi_pll_calc\n"); ++ ++retry: ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.clkin = dss_clk_fck2; ++ cur.use_dss2_fck = 1; ++ cur.highfreq = 0; ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; ++ ++cur.regm3) { ++ cur.dsi1_pll_fclk = cur.dsiphy / cur.regm3; ++ ++ /* this will narrow down the search a bit, ++ * but still give pixclocks below what was ++ * requested */ ++ if (cur.dsi1_pll_fclk < req_pck) ++ break; ++ ++ if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.dsi1_pll_fclk < ++ req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, ++ cur.dsi1_pll_fclk, ++ &cur.lck_div, ++ &cur.pck_div); ++ ++ cur.lck = cur.dsi1_pll_fclk / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < ++ abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } ++ } ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */ ++ best.regm4 = best.dsiphy / 48000000; ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ else if (best.regm4 == 0) ++ best.regm4 = 1; ++ best.dsi2_pll_fclk = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_req_pck = req_pck; ++ dsi.cache_clk_freq = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++static int dsi_pll_calc_ddrfreq(unsigned long clk_freq, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ const bool use_dss2_fck = 1; ++ unsigned long datafreq; ++ unsigned long dss_clk_fck2; ++ ++ DSSDBG("dsi_pll_calc_ddrfreq\n"); ++ ++ dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); ++ ++ if (clk_freq == dsi.cache_clk_freq && ++ dsi.cache_cinfo.clkin == dss_clk_fck2) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ datafreq = clk_freq * 4; ++ ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.use_dss2_fck = use_dss2_fck; ++ if (use_dss2_fck) { ++ cur.clkin = dss_clk_fck2; ++ cur.highfreq = 0; ++ } else { ++ cur.clkin = dispc_pclk_rate(); ++ if (cur.clkin < 32000000) ++ cur.highfreq = 0; ++ else ++ cur.highfreq = 1; ++ } ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ if (abs(cur.dsiphy - datafreq) < ++ abs(best.dsiphy - datafreq)) { ++ best = cur; ++ /* DSSDBG("best %ld\n", best.dsiphy); */ ++ } ++ ++ if (cur.dsiphy == datafreq) ++ goto found; ++ } ++ } ++found: ++ /* DSI1_PLL_FCLK (regm3) is not used. Set it to something sane. */ ++ best.regm3 = best.dsiphy / 48000000; ++ if (best.regm3 > REGM3_MAX) ++ best.regm3 = REGM3_MAX; ++ else if (best.regm3 == 0) ++ best.regm3 = 1; ++ best.dsi1_pll_fclk = best.dsiphy / best.regm3; ++ ++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */ ++ best.regm4 = best.dsiphy / 48000000; ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ else if (best.regm4 == 0) ++ best.regm4 = 1; ++ best.dsi2_pll_fclk = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_clk_freq = clk_freq; ++ dsi.cache_req_pck = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dsi_pll_program(struct dsi_clock_info *cinfo) ++{ ++ int r = 0; ++ u32 l; ++ ++ DSSDBG("dsi_pll_program\n"); ++ ++ dsi.dsiphy = cinfo->dsiphy; ++ dsi.ddr_clk = dsi.dsiphy / 4; ++ dsi.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; ++ dsi.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; ++ ++ DSSDBG("DSI Fint %ld\n", cinfo->fint); ++ ++ DSSDBG("clkin (%s) rate %ld, highfreq %d\n", ++ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", ++ cinfo->clkin, ++ cinfo->highfreq); ++ ++ /* DSIPHY == CLKIN4DDR */ ++ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", ++ cinfo->regm, ++ cinfo->regn, ++ cinfo->clkin, ++ cinfo->highfreq + 1, ++ cinfo->dsiphy); ++ ++ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", ++ dsi.dsiphy / 1000 / 1000 / 2); ++ ++ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); ++ ++ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", ++ cinfo->regm3, cinfo->dsi1_pll_fclk); ++ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", ++ cinfo->regm4, cinfo->dsi2_pll_fclk); ++ ++ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION1); ++ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ ++ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ ++ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ ++ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ ++ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION1, l); ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ ++ /* DSI_PLL_CLKSEL */ ++ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); ++ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ ++ ++ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { ++ DSSERR("dsi pll go bit not going down.\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { ++ DSSERR("cannot lock PLL\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ dsi.pll_locked = 1; ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ ++ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ ++ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ ++ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ ++ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ ++ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ ++ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ ++ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ ++ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ DSSDBG("PLL config done\n"); ++err: ++ return r; ++} ++ ++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv) ++{ ++ int r = 0; ++ enum dsi_pll_power_state pwstate; ++ struct dispc_clock_info cinfo; ++ ++ DSSDBG("PLL init\n"); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ /* XXX this should be calculated depending on the screen size, ++ * required framerate and DSI speed. ++ * For now 48MHz is enough for 864x480@60 with 360Mbps/lane ++ * with two lanes */ ++ r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo); ++ if (r) ++ goto err0; ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) { ++ DSSERR("Failed to set basic clocks\n"); ++ goto err0; ++ } ++ ++ r = regulator_enable(dsi.vdds_dsi_reg); ++ if (r) ++ goto err0; ++ ++ /* XXX PLL does not come out of reset without this... */ ++ dispc_pck_free_enable(1); ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { ++ DSSERR("PLL not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err1; ++ } ++ ++ /* XXX ... but if left on, we get problems when planes do not ++ * fill the whole display. No idea about this */ ++ dispc_pck_free_enable(0); ++ ++ if (enable_hsclk && enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_ALL; ++ else if (enable_hsclk) ++ pwstate = DSI_PLL_POWER_ON_HSCLK; ++ else if (enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_DIV; ++ else ++ pwstate = DSI_PLL_POWER_OFF; ++ ++ r = dsi_pll_power(pwstate); ++ ++ if (r) ++ goto err1; ++ ++ DSSDBG("PLL init done\n"); ++ ++ return 0; ++err1: ++ regulator_disable(dsi.vdds_dsi_reg); ++err0: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ return r; ++} ++ ++void dsi_pll_uninit(void) ++{ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ dsi.pll_locked = 0; ++ dsi_pll_power(DSI_PLL_POWER_OFF); ++ regulator_disable(dsi.vdds_dsi_reg); ++ DSSDBG("PLL uninit done\n"); ++} ++ ++unsigned long dsi_get_dsi1_pll_rate(void) ++{ ++ return dsi.dsi1_pll_fclk; ++} ++ ++unsigned long dsi_get_dsi2_pll_rate(void) ++{ ++ return dsi.dsi2_pll_fclk; ++} ++ ++void dsi_dump_clocks(struct seq_file *s) ++{ ++ int clksel; ++ ++ enable_clocks(1); ++ ++ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); ++ ++ seq_printf(s, "- dsi -\n"); ++ ++ seq_printf(s, "dsi fclk source = %s\n", ++ dss_get_dsi_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi2_pll_fclk"); ++ ++ seq_printf(s, "dsi pll source = %s\n", ++ clksel == 0 ? ++ "dss2_alwon_fclk" : "pclkfree"); ++ ++ seq_printf(s, "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", ++ dsi.dsiphy, dsi.ddr_clk); ++ ++ seq_printf(s, "dsi1_pll_fck\t%lu (%s)\n" ++ "dsi2_pll_fck\t%lu (%s)\n", ++ dsi.dsi1_pll_fclk, ++ dss_get_dispc_clk_source() == 0 ? "off" : "on", ++ dsi.dsi2_pll_fclk, ++ dss_get_dsi_clk_source() == 0 ? "off" : "on"); ++ ++ enable_clocks(0); ++} ++ ++void dsi_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DSI_REVISION); ++ DUMPREG(DSI_SYSCONFIG); ++ DUMPREG(DSI_SYSSTATUS); ++ DUMPREG(DSI_IRQSTATUS); ++ DUMPREG(DSI_IRQENABLE); ++ DUMPREG(DSI_CTRL); ++ DUMPREG(DSI_COMPLEXIO_CFG1); ++ DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); ++ DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); ++ DUMPREG(DSI_CLK_CTRL); ++ DUMPREG(DSI_TIMING1); ++ DUMPREG(DSI_TIMING2); ++ DUMPREG(DSI_VM_TIMING1); ++ DUMPREG(DSI_VM_TIMING2); ++ DUMPREG(DSI_VM_TIMING3); ++ DUMPREG(DSI_CLK_TIMING); ++ DUMPREG(DSI_TX_FIFO_VC_SIZE); ++ DUMPREG(DSI_RX_FIFO_VC_SIZE); ++ DUMPREG(DSI_COMPLEXIO_CFG2); ++ DUMPREG(DSI_RX_FIFO_VC_FULLNESS); ++ DUMPREG(DSI_VM_TIMING4); ++ DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); ++ DUMPREG(DSI_VM_TIMING5); ++ DUMPREG(DSI_VM_TIMING6); ++ DUMPREG(DSI_VM_TIMING7); ++ DUMPREG(DSI_STOPCLK_TIMING); ++ ++ DUMPREG(DSI_VC_CTRL(0)); ++ DUMPREG(DSI_VC_TE(0)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); ++ DUMPREG(DSI_VC_IRQSTATUS(0)); ++ DUMPREG(DSI_VC_IRQENABLE(0)); ++ ++ DUMPREG(DSI_VC_CTRL(1)); ++ DUMPREG(DSI_VC_TE(1)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); ++ DUMPREG(DSI_VC_IRQSTATUS(1)); ++ DUMPREG(DSI_VC_IRQENABLE(1)); ++ ++ DUMPREG(DSI_VC_CTRL(2)); ++ DUMPREG(DSI_VC_TE(2)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); ++ DUMPREG(DSI_VC_IRQSTATUS(2)); ++ DUMPREG(DSI_VC_IRQENABLE(2)); ++ ++ DUMPREG(DSI_VC_CTRL(3)); ++ DUMPREG(DSI_VC_TE(3)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); ++ DUMPREG(DSI_VC_IRQSTATUS(3)); ++ DUMPREG(DSI_VC_IRQENABLE(3)); ++ ++ DUMPREG(DSI_DSIPHY_CFG0); ++ DUMPREG(DSI_DSIPHY_CFG1); ++ DUMPREG(DSI_DSIPHY_CFG2); ++ DUMPREG(DSI_DSIPHY_CFG5); ++ ++ DUMPREG(DSI_PLL_CONTROL); ++ DUMPREG(DSI_PLL_STATUS); ++ DUMPREG(DSI_PLL_GO); ++ DUMPREG(DSI_PLL_CONFIGURATION1); ++ DUMPREG(DSI_PLL_CONFIGURATION2); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++enum dsi_complexio_power_state { ++ DSI_COMPLEXIO_POWER_OFF = 0x0, ++ DSI_COMPLEXIO_POWER_ON = 0x1, ++ DSI_COMPLEXIO_POWER_ULPS = 0x2, ++}; ++ ++static int dsi_complexio_power(enum dsi_complexio_power_state state) ++{ ++ int t = 0; ++ ++ /* PWR_CMD */ ++ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); ++ ++ /* PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("failed to set complexio power state to " ++ "%d\n", state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static void dsi_complexio_config(struct omap_dss_device *dssdev) ++{ ++ u32 r; ++ ++ int clk_lane = dssdev->phy.dsi.clk_lane; ++ int data1_lane = dssdev->phy.dsi.data1_lane; ++ int data2_lane = dssdev->phy.dsi.data2_lane; ++ int clk_pol = dssdev->phy.dsi.clk_pol; ++ int data1_pol = dssdev->phy.dsi.data1_pol; ++ int data2_pol = dssdev->phy.dsi.data2_pol; ++ ++ r = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ r = FLD_MOD(r, clk_lane, 2, 0); ++ r = FLD_MOD(r, clk_pol, 3, 3); ++ r = FLD_MOD(r, data1_lane, 6, 4); ++ r = FLD_MOD(r, data1_pol, 7, 7); ++ r = FLD_MOD(r, data2_lane, 10, 8); ++ r = FLD_MOD(r, data2_pol, 11, 11); ++ dsi_write_reg(DSI_COMPLEXIO_CFG1, r); ++ ++ /* The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for ++ the hardware to take into account a new configuration of the complex ++ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to ++ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, ++ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set ++ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the ++ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the ++ DSI complex I/O configuration is unknown. */ ++ ++ /* ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ REG_FLD_MOD(DSI_CTRL, 0, 0, 0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ */ ++} ++ ++static inline unsigned ns2ddr(unsigned ns) ++{ ++ /* convert time in ns to ddr ticks, rounding up */ ++ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; ++} ++ ++static inline unsigned ddr2ns(unsigned ddr) ++{ ++ return ddr * 1000 * 1000 / (dsi.ddr_clk / 1000); ++} ++ ++static void dsi_complexio_timings(void) ++{ ++ u32 r; ++ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; ++ u32 tlpx_half, tclk_trail, tclk_zero; ++ u32 tclk_prepare; ++ ++ /* calculate timings */ ++ ++ /* 1 * DDR_CLK = 2 * UI */ ++ ++ /* min 40ns + 4*UI max 85ns + 6*UI */ ++ ths_prepare = ns2ddr(70) + 2; ++ ++ /* min 145ns + 10*UI */ ++ ths_prepare_ths_zero = ns2ddr(175) + 2; ++ ++ /* min max(8*UI, 60ns+4*UI) */ ++ ths_trail = ns2ddr(60) + 5; ++ ++ /* min 100ns */ ++ ths_exit = ns2ddr(145); ++ ++ /* tlpx min 50n */ ++ tlpx_half = ns2ddr(25); ++ ++ /* min 60ns */ ++ tclk_trail = ns2ddr(60) + 2; ++ ++ /* min 38ns, max 95ns */ ++ tclk_prepare = ns2ddr(65); ++ ++ /* min tclk-prepare + tclk-zero = 300ns */ ++ tclk_zero = ns2ddr(260); ++ ++ DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", ++ ths_prepare, ddr2ns(ths_prepare), ++ ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); ++ DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", ++ ths_trail, ddr2ns(ths_trail), ++ ths_exit, ddr2ns(ths_exit)); ++ ++ DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " ++ "tclk_zero %u (%uns)\n", ++ tlpx_half, ddr2ns(tlpx_half), ++ tclk_trail, ddr2ns(tclk_trail), ++ tclk_zero, ddr2ns(tclk_zero)); ++ DSSDBG("tclk_prepare %u (%uns)\n", ++ tclk_prepare, ddr2ns(tclk_prepare)); ++ ++ /* program timings */ ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG0); ++ r = FLD_MOD(r, ths_prepare, 31, 24); ++ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); ++ r = FLD_MOD(r, ths_trail, 15, 8); ++ r = FLD_MOD(r, ths_exit, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG0, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ r = FLD_MOD(r, tlpx_half, 22, 16); ++ r = FLD_MOD(r, tclk_trail, 15, 8); ++ r = FLD_MOD(r, tclk_zero, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG1, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ r = FLD_MOD(r, tclk_prepare, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG2, r); ++} ++ ++ ++static int dsi_complexio_init(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_complexio_init\n"); ++ ++ /* CIO_CLK_ICG, enable L3 clk to CIO */ ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ dsi_read_reg(DSI_DSIPHY_CFG5); ++ ++ if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { ++ DSSERR("ComplexIO PHY not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_config(dssdev); ++ ++ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); ++ ++ if (r) ++ goto err; ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { ++ DSSERR("ComplexIO not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { ++ DSSERR("ComplexIO LDO power down.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_timings(); ++ ++ /* ++ The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the ++ hardware to recognize a new configuration of the complex I/O (done ++ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow ++ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next ++ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] ++ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN ++ bit to 1. If the sequence is not followed, the DSi complex I/O ++ configuration is undetermined. ++ */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ ++ DSSDBG("CIO init done\n"); ++err: ++ return r; ++} ++ ++static void dsi_complexio_uninit(void) ++{ ++ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); ++} ++ ++static int _dsi_wait_reset(void) ++{ ++ int i = 0; ++ ++ while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { ++ if (i++ > 5) { ++ DSSERR("soft reset failed\n"); ++ return -ENODEV; ++ } ++ udelay(1); ++ } ++ ++ return 0; ++} ++ ++static int _dsi_reset(void) ++{ ++ /* Soft reset */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); ++ return _dsi_wait_reset(); ++} ++ ++ ++static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); ++} ++ ++static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); ++} ++ ++static int dsi_force_tx_stop_mode_io(void) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { ++ DSSERR("TX_STOP bit not going down\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_print_status(int channel) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " ++ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", ++ channel, ++ FLD_GET(r, 5, 5), ++ FLD_GET(r, 6, 6), ++ FLD_GET(r, 15, 15), ++ FLD_GET(r, 16, 16), ++ FLD_GET(r, 20, 20)); ++ ++ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); ++ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); ++} ++ ++static int dsi_vc_enable(int channel, bool enable) ++{ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) ++ DSSDBG("dsi_vc_enable channel %d, enable %d\n", ++ channel, enable); ++ ++ enable = enable ? 1 : 0; ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); ++ ++ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { ++ DSSERR("Failed to set dsi_vc_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_initial_config(int channel) ++{ ++ u32 r; ++ ++ DSSDBGF("%d", channel); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ if (FLD_GET(r, 15, 15)) /* VC_BUSY */ ++ DSSERR("VC(%d) busy when trying to configure it!\n", ++ channel); ++ ++ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++ ++ dsi.vc[channel].mode = DSI_VC_MODE_L4; ++} ++ ++static void dsi_vc_config_l4(int channel) ++{ ++ if (dsi.vc[channel].mode == DSI_VC_MODE_L4) ++ return; ++ ++ DSSDBGF("%d", channel); ++ ++ dsi_vc_enable(channel, 0); ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ ++ DSSERR("vc(%d) busy when trying to config for L4\n", channel); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ ++ ++ dsi_vc_enable(channel, 1); ++ ++ dsi.vc[channel].mode = DSI_VC_MODE_L4; ++} ++ ++static void dsi_vc_config_vp(int channel) ++{ ++ if (dsi.vc[channel].mode == DSI_VC_MODE_VP) ++ return; ++ ++ DSSDBGF("%d", channel); ++ ++ dsi_vc_enable(channel, 0); ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ ++ DSSERR("vc(%d) busy when trying to config for VP\n", channel); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ ++ ++ dsi_vc_enable(channel, 1); ++ ++ dsi.vc[channel].mode = DSI_VC_MODE_VP; ++} ++ ++ ++static void dsi_vc_enable_hs(int channel, bool enable) ++{ ++ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); ++ ++ dsi_vc_enable(channel, 0); ++ dsi_if_enable(0); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); ++ ++ dsi_vc_enable(channel, 1); ++ dsi_if_enable(1); ++ ++ dsi_force_tx_stop_mode_io(); ++} ++ ++static void dsi_vc_flush_long_data(int channel) ++{ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ } ++} ++ ++static void dsi_show_rx_ack_with_err(u16 err) ++{ ++ DSSERR("\tACK with ERROR (%#x):\n", err); ++ if (err & (1 << 0)) ++ DSSERR("\t\tSoT Error\n"); ++ if (err & (1 << 1)) ++ DSSERR("\t\tSoT Sync Error\n"); ++ if (err & (1 << 2)) ++ DSSERR("\t\tEoT Sync Error\n"); ++ if (err & (1 << 3)) ++ DSSERR("\t\tEscape Mode Entry Command Error\n"); ++ if (err & (1 << 4)) ++ DSSERR("\t\tLP Transmit Sync Error\n"); ++ if (err & (1 << 5)) ++ DSSERR("\t\tHS Receive Timeout Error\n"); ++ if (err & (1 << 6)) ++ DSSERR("\t\tFalse Control Error\n"); ++ if (err & (1 << 7)) ++ DSSERR("\t\t(reserved7)\n"); ++ if (err & (1 << 8)) ++ DSSERR("\t\tECC Error, single-bit (corrected)\n"); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); ++ if (err & (1 << 10)) ++ DSSERR("\t\tChecksum Error\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ if (err & (1 << 13)) ++ DSSERR("\t\tInvalid Transmission Length\n"); ++ if (err & (1 << 14)) ++ DSSERR("\t\t(reserved14)\n"); ++ if (err & (1 << 15)) ++ DSSERR("\t\tDSI Protocol Violation\n"); ++} ++ ++static u16 dsi_vc_flush_receive_data(int channel) ++{ ++ /* RX_FIFO_NOT_EMPTY */ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ u8 dt; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 5, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ dsi_show_rx_ack_with_err(err); ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ DSSDBG("\tDCS long response, len %d\n", ++ FLD_GET(val, 23, 8)); ++ dsi_vc_flush_long_data(channel); ++ } else { ++ DSSERR("\tunknown datatype 0x%02x\n", dt); ++ } ++ } ++ return 0; ++} ++ ++static int dsi_vc_send_bta(int channel) ++{ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO && ++ (dsi.debug_write || dsi.debug_read)) ++ DSSDBG("dsi_vc_send_bta %d\n", channel); ++ ++ WARN_ON(!mutex_is_locked(&dsi.bus_lock)); ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ ++ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); ++ dsi_vc_flush_receive_data(channel); ++ } ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ ++ ++ return 0; ++} ++ ++int dsi_vc_send_bta_sync(int channel) ++{ ++ int r = 0; ++ u32 err; ++ ++ INIT_COMPLETION(dsi.bta_completion); ++ ++ dsi_vc_enable_bta_irq(channel); ++ ++ r = dsi_vc_send_bta(channel); ++ if (r) ++ goto err; ++ ++ if (wait_for_completion_timeout(&dsi.bta_completion, ++ msecs_to_jiffies(500)) == 0) { ++ DSSERR("Failed to receive BTA\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ err = dsi_get_errors(); ++ if (err) { ++ DSSERR("Error while sending BTA: %x\n", err); ++ r = -EIO; ++ goto err; ++ } ++err: ++ dsi_vc_disable_bta_irq(channel); ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_send_bta_sync); ++ ++static inline void dsi_vc_write_long_header(int channel, u8 data_type, ++ u16 len, u8 ecc) ++{ ++ u32 val; ++ u8 data_id; ++ ++ WARN_ON(!mutex_is_locked(&dsi.bus_lock)); ++ ++ /*data_id = data_type | channel << 6; */ ++ data_id = data_type | dsi.vc[channel].dest_per << 6; ++ ++ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | ++ FLD_VAL(ecc, 31, 24); ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); ++} ++ ++static inline void dsi_vc_write_long_payload(int channel, ++ u8 b1, u8 b2, u8 b3, u8 b4) ++{ ++ u32 val; ++ ++ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; ++ ++/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", ++ b1, b2, b3, b4, val); */ ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); ++} ++ ++static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, ++ u8 ecc) ++{ ++ /*u32 val; */ ++ int i; ++ u8 *p; ++ int r = 0; ++ u8 b1, b2, b3, b4; ++ ++ if (dsi.debug_write) ++ DSSDBG("dsi_vc_send_long, %d bytes\n", len); ++ ++ /* len + header */ ++ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { ++ DSSERR("unable to send long packet: packet too long.\n"); ++ return -EINVAL; ++ } ++ ++ dsi_vc_config_l4(channel); ++ ++ dsi_vc_write_long_header(channel, data_type, len, ecc); ++ ++ /*dsi_vc_print_status(0); */ ++ ++ p = data; ++ for (i = 0; i < len >> 2; i++) { ++ if (dsi.debug_write) ++ DSSDBG("\tsending full packet %d\n", i); ++ /*dsi_vc_print_status(0); */ ++ ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ b4 = *p++; ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, b4); ++ } ++ ++ i = len % 4; ++ if (i) { ++ b1 = 0; b2 = 0; b3 = 0; ++ ++ if (dsi.debug_write) ++ DSSDBG("\tsending remainder bytes %d\n", i); ++ ++ switch (i) { ++ case 3: ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ break; ++ case 2: ++ b1 = *p++; ++ b2 = *p++; ++ break; ++ case 1: ++ b1 = *p++; ++ break; ++ } ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, 0); ++ } ++ ++ return r; ++} ++ ++static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) ++{ ++ u32 r; ++ u8 data_id; ++ ++ WARN_ON(!mutex_is_locked(&dsi.bus_lock)); ++ ++ if (dsi.debug_write) ++ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", ++ channel, ++ data_type, data & 0xff, (data >> 8) & 0xff); ++ ++ dsi_vc_config_l4(channel); ++ ++ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { ++ DSSERR("ERROR FIFO FULL, aborting transfer\n"); ++ return -EINVAL; ++ } ++ ++ data_id = data_type | channel << 6; ++ ++ r = (data_id << 0) | (data << 8) | (ecc << 24); ++ ++ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); ++ ++ return 0; ++} ++ ++int dsi_vc_send_null(int channel) ++{ ++ u8 nullpkg[] = {0, 0, 0, 0}; ++ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); ++} ++EXPORT_SYMBOL(dsi_vc_send_null); ++ ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ BUG_ON(len == 0); ++ ++ if (len == 1) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, ++ data[0], 0); ++ } else if (len == 2) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, ++ data[0] | (data[1] << 8), 0); ++ } else { ++ /* 0x39 = DCS Long Write */ ++ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, ++ data, len, 0); ++ } ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); ++ ++int dsi_vc_dcs_write(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ r = dsi_vc_dcs_write_nosync(channel, data, len); ++ if (r) ++ return r; ++ ++ r = dsi_vc_send_bta_sync(channel); ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write); ++ ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) ++{ ++ u32 val; ++ u8 dt; ++ int r; ++ ++ if (dsi.debug_read) ++ DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd); ++ ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); ++ if (r) ++ return r; ++ ++ r = dsi_vc_send_bta_sync(channel); ++ if (r) ++ return r; ++ ++ /* RX_FIFO_NOT_EMPTY */ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { ++ DSSERR("RX fifo empty when trying to read.\n"); ++ return -EIO; ++ } ++ ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (dsi.debug_read) ++ DSSDBG("\theader: %08x\n", val); ++ dt = FLD_GET(val, 5, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ dsi_show_rx_ack_with_err(err); ++ return -EIO; ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ u8 data = FLD_GET(val, 15, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS short response, 1 byte: %02x\n", data); ++ ++ if (buflen < 1) ++ return -EIO; ++ ++ buf[0] = data; ++ ++ return 1; ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ u16 data = FLD_GET(val, 23, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS short response, 2 byte: %04x\n", data); ++ ++ if (buflen < 2) ++ return -EIO; ++ ++ buf[0] = data & 0xff; ++ buf[1] = (data >> 8) & 0xff; ++ ++ return 2; ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ int w; ++ int len = FLD_GET(val, 23, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS long response, len %d\n", len); ++ ++ if (len > buflen) ++ return -EIO; ++ ++ /* two byte checksum ends the packet, not included in len */ ++ for (w = 0; w < len + 2;) { ++ int b; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (dsi.debug_read) ++ DSSDBG("\t\t%02x %02x %02x %02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ ++ for (b = 0; b < 4; ++b) { ++ if (w < len) ++ buf[w] = (val >> (b * 8)) & 0xff; ++ /* we discard the 2 byte checksum */ ++ ++w; ++ } ++ } ++ ++ return len; ++ ++ } else { ++ DSSERR("\tunknown datatype 0x%02x\n", dt); ++ return -EIO; ++ } ++} ++EXPORT_SYMBOL(dsi_vc_dcs_read); ++ ++ ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len) ++{ ++ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, ++ len, 0); ++} ++EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); ++ ++ ++static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("LP_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ ++ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ ++ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ ++ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_ta_timeout(int ns, int x8, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("TA_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ ++ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ ++ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("TA_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_stop_state_counter(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("STOP_STATE_COUNTER_IO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ ++ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ ++ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in TxByteClkHS */ ++ ++ fck = dsi.ddr_clk / 4; ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("HS_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ ++ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ ++ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++static int dsi_proto_config(struct omap_dss_device *dssdev) ++{ ++ u32 r; ++ int buswidth = 0; ++ int div; ++ ++ dsi_config_tx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ dsi_config_rx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ /* XXX what values for the timeouts? */ ++ dsi_set_stop_state_counter(1000, 0, 0); ++ ++ dsi_set_ta_timeout(50000, 1, 1); ++ ++ /* 3000ns * 16 */ ++ dsi_set_lp_rx_timeout(3000, 0, 1); ++ ++ /* 10000ns * 4 */ ++ dsi_set_hs_tx_timeout(10000, 1, 0); ++ ++ switch (dssdev->ctrl.pixel_size) { ++ case 16: ++ buswidth = 0; ++ break; ++ case 18: ++ buswidth = 1; ++ break; ++ case 24: ++ buswidth = 2; ++ break; ++ default: ++ BUG(); ++ } ++ ++ r = dsi_read_reg(DSI_CTRL); ++ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ ++ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ ++ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ ++ ++ div = dispc_lclk_rate() / dispc_pclk_rate(); ++ r = FLD_MOD(r, div == 2 ? 0 : 1, 4, 4); /* VP_CLK_RATIO */ ++ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ ++ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ ++ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ ++ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ ++ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ ++ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ ++ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ ++ ++ dsi_write_reg(DSI_CTRL, r); ++ ++ dsi_vc_initial_config(0); ++ ++ /* set all vc targets to peripheral 0 */ ++ dsi.vc[0].dest_per = 0; ++ dsi.vc[1].dest_per = 0; ++ dsi.vc[2].dest_per = 0; ++ dsi.vc[3].dest_per = 0; ++ ++ return 0; ++} ++ ++static void dsi_proto_timings(struct omap_dss_device *dssdev) ++{ ++ unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; ++ unsigned tclk_pre, tclk_post; ++ unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; ++ unsigned ths_trail, ths_exit; ++ unsigned ddr_clk_pre, ddr_clk_post; ++ unsigned enter_hs_mode_lat, exit_hs_mode_lat; ++ unsigned ths_eot; ++ u32 r; ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG0); ++ ths_prepare = FLD_GET(r, 31, 24); ++ ths_prepare_ths_zero = FLD_GET(r, 23, 16); ++ ths_zero = ths_prepare_ths_zero - ths_prepare; ++ ths_trail = FLD_GET(r, 15, 8); ++ ths_exit = FLD_GET(r, 7, 0); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ tlpx = FLD_GET(r, 22, 16) * 2; ++ tclk_trail = FLD_GET(r, 15, 8); ++ tclk_zero = FLD_GET(r, 7, 0); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ tclk_prepare = FLD_GET(r, 7, 0); ++ ++ /* min 8*UI */ ++ tclk_pre = 20; ++ /* min 60ns + 52*UI */ ++ tclk_post = ns2ddr(60) + 26; ++ ++ /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */ ++ if (dssdev->phy.dsi.data1_lane != 0 && ++ dssdev->phy.dsi.data2_lane != 0) ++ ths_eot = 2; ++ else ++ ths_eot = 4; ++ ++ ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare, ++ 4); ++ ddr_clk_post = DIV_ROUND_UP(tclk_post + tclk_trail, 4) + ths_eot; ++ ++ BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255); ++ BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255); ++ ++ r = dsi_read_reg(DSI_CLK_TIMING); ++ r = FLD_MOD(r, ddr_clk_pre, 15, 8); ++ r = FLD_MOD(r, ddr_clk_post, 7, 0); ++ dsi_write_reg(DSI_CLK_TIMING, r); ++ ++ DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n", ++ ddr_clk_pre, ++ ddr_clk_post); ++ ++ enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) + ++ DIV_ROUND_UP(ths_prepare, 4) + ++ DIV_ROUND_UP(ths_zero + 3, 4); ++ ++ exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot; ++ ++ r = FLD_VAL(enter_hs_mode_lat, 31, 16) | ++ FLD_VAL(exit_hs_mode_lat, 15, 0); ++ dsi_write_reg(DSI_VM_TIMING7, r); ++ ++ DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n", ++ enter_hs_mode_lat, exit_hs_mode_lat); ++} ++ ++ ++#define DSI_DECL_VARS \ ++ int __dsi_cb = 0; u32 __dsi_cv = 0; ++ ++#define DSI_FLUSH(ch) \ ++ if (__dsi_cb > 0) { \ ++ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ ++ __dsi_cb = __dsi_cv = 0; \ ++ } ++ ++#define DSI_PUSH(ch, data) \ ++ do { \ ++ __dsi_cv |= (data) << (__dsi_cb * 8); \ ++ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ ++ if (++__dsi_cb > 3) \ ++ DSI_FLUSH(ch); \ ++ } while (0) ++ ++static int dsi_update_screen_l4(struct omap_dss_device *dssdev, ++ int x, int y, int w, int h) ++{ ++ /* Note: supports only 24bit colors in 32bit container */ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = dssdev->ctrl.pixel_size / 8; ++ int scr_width; ++ u32 __iomem *data; ++ int start_offset; ++ int horiz_inc; ++ int current_x; ++ struct omap_overlay *ovl; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ ovl = dssdev->manager->overlays[0]; ++ ++ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) ++ return -EINVAL; ++ ++ if (dssdev->ctrl.pixel_size != 24) ++ return -EINVAL; ++ ++ scr_width = ovl->info.screen_width; ++ data = ovl->info.vaddr; ++ ++ start_offset = scr_width * y + x; ++ horiz_inc = scr_width - w; ++ current_x = x; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes ++ * in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ /* we seem to get better perf if we divide the tx fifo to half, ++ and while the other half is being sent, we fill the other half ++ max_dsi_packet_size /= 2; */ ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); ++ ++ pixels_left = w * h; ++ ++ DSSDBG("total pixels %d\n", pixels_left); ++ ++ data += start_offset; ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++#if 1 ++ /* using fifo not empty */ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ udelay(1); ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#elif 1 ++ /* using fifo emptiness */ ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < ++ max_dsi_packet_size) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#else ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#endif ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix = __raw_readl(data++); ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ ++ current_x++; ++ if (current_x == x+w) { ++ current_x = x; ++ data += horiz_inc; ++ } ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ return 0; ++} ++ ++static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int bytespp = dssdev->ctrl.pixel_size / 8; ++ int len; ++ int total_len; ++ int packet_payload; ++ int packet_len; ++ u32 l; ++ bool use_te_trigger; ++ const int channel = 0; ++ ++ use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) ++ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ len = w * h * bytespp; ++ ++ /* XXX: one packet could be longer, I think? Line buffer is ++ * 1024 x 24bits, but we have to put DCS cmd there also. ++ * 1023 * 3 should work, but causes strange color effects. */ ++ packet_payload = min(w, (u16)1020) * bytespp; ++ ++ packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ ++ total_len = (len / packet_payload) * packet_len; ++ ++ if (len % packet_payload) ++ total_len += (len % packet_payload) + 1; ++ ++ if (0) ++ dsi_vc_print_status(1); ++ ++ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ ++ dsi_write_reg(DSI_VC_TE(channel), l); ++ ++ dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); ++ ++ if (use_te_trigger) ++ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ ++ else ++ l = FLD_MOD(l, 1, 31, 31); /* TE_START */ ++ dsi_write_reg(DSI_VC_TE(channel), l); ++ ++ /* We put SIDLEMODE to no-idle for the duration of the transfer, ++ * because DSS interrupts are not capable of waking up the CPU and the ++ * framedone interrupt could be delayed for quite a long time. I think ++ * the same goes for any DSS interrupts, but for some reason I have not ++ * seen the problem anywhere else than here. ++ */ ++ dispc_disable_sidle(); ++ ++ dss_start_update(dssdev); ++ ++ if (use_te_trigger) { ++ /* disable LP_RX_TO, so that we can receive TE. Time to wait ++ * for TE is longer than the timer allows */ ++ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ ++ ++ dsi_vc_send_bta(channel); ++ } ++} ++ ++static void dsi_framedone_irq_callback(void *data, u32 mask) ++{ ++ /* Note: We get FRAMEDONE when DISPC has finished sending pixels and ++ * turns itself off. However, DSI still has the pixels in its buffers, ++ * and is sending the data. ++ */ ++ ++ /* SIDLEMODE back to smart-idle */ ++ dispc_enable_sidle(); ++ ++ dsi.framedone_received = true; ++ wake_up(&dsi.waitqueue); ++} ++ ++static void dsi_set_update_region(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ spin_lock(&dsi.update_lock); ++ if (dsi.update_region.dirty) { ++ dsi.update_region.x = min(x, dsi.update_region.x); ++ dsi.update_region.y = min(y, dsi.update_region.y); ++ dsi.update_region.w = max(w, dsi.update_region.w); ++ dsi.update_region.h = max(h, dsi.update_region.h); ++ } else { ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ } ++ ++ dsi.update_region.device = dssdev; ++ dsi.update_region.dirty = true; ++ ++ spin_unlock(&dsi.update_lock); ++ ++} ++ ++static void dsi_start_auto_update(struct omap_dss_device *dssdev) ++{ ++ u16 w, h; ++ int i; ++ ++ DSSDBG("starting auto update\n"); ++ ++ /* In automatic mode the overlay settings are applied like on DPI/SDI. ++ * Mark the overlays dirty, so that we get the overlays configured, as ++ * manual mode has left them in bad shape after config partia planes */ ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ if (ovl->manager == dssdev->manager) ++ ovl->info_dirty = true; ++ } ++ dssdev->manager->apply(dssdev->manager); ++ ++ dssdev->get_resolution(dssdev, &w, &h); ++ ++ dsi_set_update_region(dssdev, 0, 0, w, h); ++ ++ dsi_perf_mark_start_auto(); ++ ++ wake_up(&dsi.waitqueue); ++} ++ ++static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) ++{ ++ int r; ++ r = dssdev->driver->enable_te(dssdev, enable); ++ /* XXX for some reason, DSI TE breaks if we don't wait here. ++ * Panel bug? Needs more studying */ ++ msleep(100); ++ return r; ++} ++ ++static void dsi_handle_framedone(void) ++{ ++ int r; ++ const int channel = 0; ++ bool use_te_trigger; ++ ++ use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) ++ DSSDBG("FRAMEDONE\n"); ++ ++ if (use_te_trigger) { ++ /* enable LP_RX_TO again after the TE */ ++ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ ++ } ++ ++ /* Send BTA after the frame. We need this for the TE to work, as TE ++ * trigger is only sent for BTAs without preceding packet. Thus we need ++ * to BTA after the pixel packets so that next BTA will cause TE ++ * trigger. ++ * ++ * This is not needed when TE is not in use, but we do it anyway to ++ * make sure that the transfer has been completed. It would be more ++ * optimal, but more complex, to wait only just before starting next ++ * transfer. */ ++ r = dsi_vc_send_bta_sync(channel); ++ if (r) ++ DSSERR("BTA after framedone failed\n"); ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++ dispc_fake_vsync_irq(); ++#endif ++} ++ ++static int dsi_update_thread(void *data) ++{ ++ unsigned long timeout; ++ struct omap_dss_device *device; ++ u16 x, y, w, h; ++ ++ while (1) { ++ bool sched; ++ ++ wait_event_interruptible(dsi.waitqueue, ++ dsi.update_mode == OMAP_DSS_UPDATE_AUTO || ++ (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && ++ dsi.update_region.dirty == true) || ++ kthread_should_stop()); ++ ++ if (kthread_should_stop()) ++ break; ++ ++ dsi_bus_lock(); ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED || ++ kthread_should_stop()) { ++ dsi_bus_unlock(); ++ break; ++ } ++ ++ dsi_perf_mark_setup(); ++ ++ if (dsi.update_region.dirty) { ++ spin_lock(&dsi.update_lock); ++ dsi.active_update_region = dsi.update_region; ++ dsi.update_region.dirty = false; ++ spin_unlock(&dsi.update_lock); ++ } ++ ++ device = dsi.active_update_region.device; ++ x = dsi.active_update_region.x; ++ y = dsi.active_update_region.y; ++ w = dsi.active_update_region.w; ++ h = dsi.active_update_region.h; ++ ++ if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) { ++ dss_setup_partial_planes(device, ++ &x, &y, &w, &h); ++#if 1 ++ /* XXX there seems to be a bug in this driver ++ * or OMAP hardware. Some updates with certain ++ * widths and x coordinates fail. These widths ++ * are always odd, so "fix" it here for now */ ++ if (w & 1) { ++ u16 dw, dh; ++ device->get_resolution(device, ++ &dw, &dh); ++ if (x + w == dw) ++ x &= ~1; ++ ++w; ++ ++ dss_setup_partial_planes(device, ++ &x, &y, &w, &h); ++ } ++#endif ++ } ++ ++ dispc_set_lcd_size(w, h); ++ } ++ ++ if (dsi.active_update_region.dirty) { ++ dsi.active_update_region.dirty = false; ++ /* XXX TODO we don't need to send the coords, if they ++ * are the same that are already programmed to the ++ * panel. That should speed up manual update a bit */ ++ device->driver->setup_update(device, x, y, w, h); ++ } ++ ++ dsi_perf_mark_start(); ++ ++ if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ dsi_vc_config_vp(0); ++ ++ if (dsi.te_enabled && dsi.use_ext_te) ++ device->driver->wait_for_te(device); ++ ++ dsi.framedone_received = false; ++ ++ dsi_update_screen_dispc(device, x, y, w, h); ++ ++ /* wait for framedone */ ++ timeout = msecs_to_jiffies(1000); ++ timeout = wait_event_timeout(dsi.waitqueue, ++ dsi.framedone_received == true, ++ timeout); ++ ++ if (timeout == 0) { ++ DSSERR("framedone timeout\n"); ++ DSSERR("failed update %d,%d %dx%d\n", ++ x, y, w, h); ++ ++ dispc_enable_sidle(); ++ dispc_enable_lcd_out(0); ++ } else { ++ dsi_handle_framedone(); ++ dsi_perf_show("DISPC"); ++ } ++ } else { ++ dsi_update_screen_l4(device, x, y, w, h); ++ dsi_perf_show("L4"); ++ } ++ ++ sched = atomic_read(&dsi.bus_lock.count) < 0; ++ ++ complete_all(&dsi.update_completion); ++ ++ dsi_bus_unlock(); ++ ++ /* XXX We need to give others chance to get the bus lock. Is ++ * there a better way for this? */ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched) ++ schedule_timeout_interruptible(1); ++ } ++ ++ DSSDBG("update thread exiting\n"); ++ ++ return 0; ++} ++ ++ ++ ++/* Display funcs */ ++ ++static int dsi_display_init_dispc(struct omap_dss_device *dssdev) ++{ ++ int r; ++ ++ r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ return r; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); ++ dispc_enable_fifohandcheck(1); ++ ++ dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); ++ ++ { ++ struct omap_video_timings timings = { ++ .hsw = 1, ++ .hfp = 1, ++ .hbp = 1, ++ .vsw = 1, ++ .vfp = 0, ++ .vbp = 0, ++ }; ++ ++ dispc_set_lcd_timings(&timings); ++ } ++ ++ return 0; ++} ++ ++static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev) ++{ ++ omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++} ++ ++static int dsi_display_init_dsi(struct omap_dss_device *dssdev) ++{ ++ struct dsi_clock_info cinfo; ++ int r; ++ ++ _dsi_print_reset_status(); ++ ++ r = dsi_pll_init(1, 0); ++ if (r) ++ goto err0; ++ ++ r = dsi_pll_calc_ddrfreq(dssdev->phy.dsi.ddr_clk_hz, &cinfo); ++ if (r) ++ goto err1; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ goto err1; ++ ++ DSSDBG("PLL OK\n"); ++ ++ r = dsi_complexio_init(dssdev); ++ if (r) ++ goto err1; ++ ++ _dsi_print_reset_status(); ++ ++ dsi_proto_timings(dssdev); ++ dsi_set_lp_clk_divisor(dssdev); ++ ++ if (1) ++ _dsi_print_reset_status(); ++ ++ r = dsi_proto_config(dssdev); ++ if (r) ++ goto err2; ++ ++ /* enable interface */ ++ dsi_vc_enable(0, 1); ++ dsi_if_enable(1); ++ dsi_force_tx_stop_mode_io(); ++ ++ if (dssdev->driver->enable) { ++ r = dssdev->driver->enable(dssdev); ++ if (r) ++ goto err3; ++ } ++ ++ /* enable high-speed after initial config */ ++ dsi_vc_enable_hs(0, 1); ++ ++ return 0; ++err3: ++ dsi_if_enable(0); ++err2: ++ dsi_complexio_uninit(); ++err1: ++ dsi_pll_uninit(); ++err0: ++ return r; ++} ++ ++static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->driver->disable) ++ dssdev->driver->disable(dssdev); ++ ++ dsi_complexio_uninit(); ++ dsi_pll_uninit(); ++} ++ ++static int dsi_core_init(void) ++{ ++ /* Autoidle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); ++ ++ /* ENWAKEUP */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); ++ ++ /* SIDLEMODE smart-idle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); ++ ++ _dsi_initialize_irq(); ++ ++ return 0; ++} ++ ++static int dsi_display_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_display_enable\n"); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ r = omap_dss_start_device(dssdev); ++ if (r) { ++ DSSERR("failed to start device\n"); ++ goto err0; ++ } ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("dssdev already enabled\n"); ++ r = -EINVAL; ++ goto err1; ++ } ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ r = _dsi_reset(); ++ if (r) ++ goto err2; ++ ++ dsi_core_init(); ++ ++ r = dsi_display_init_dispc(dssdev); ++ if (r) ++ goto err2; ++ ++ r = dsi_display_init_dsi(dssdev); ++ if (r) ++ goto err3; ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ dsi.use_ext_te = dssdev->phy.dsi.ext_te; ++ r = dsi_set_te(dssdev, dsi.te_enabled); ++ if (r) ++ goto err3; ++ ++ dsi.update_mode = dsi.user_update_mode; ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(dssdev); ++ ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++ ++err3: ++ dsi_display_uninit_dispc(dssdev); ++err2: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++err1: ++ omap_dss_stop_device(dssdev); ++err0: ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ DSSDBG("dsi_display_enable FAILED\n"); ++ return r; ++} ++ ++static void dsi_display_disable(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("dsi_display_disable\n"); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || ++ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ goto end; ++ ++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; ++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ dsi_display_uninit_dispc(dssdev); ++ ++ dsi_display_uninit_dsi(dssdev); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ omap_dss_stop_device(dssdev); ++end: ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++} ++ ++static int dsi_display_suspend(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("dsi_display_suspend\n"); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || ++ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ goto end; ++ ++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; ++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ dsi_display_uninit_dispc(dssdev); ++ ++ dsi_display_uninit_dsi(dssdev); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++end: ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++} ++ ++static int dsi_display_resume(struct omap_dss_device *dssdev) ++{ ++ int r; ++ ++ DSSDBG("dsi_display_resume\n"); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { ++ DSSERR("dssdev not suspended\n"); ++ r = -EINVAL; ++ goto err0; ++ } ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ r = _dsi_reset(); ++ if (r) ++ goto err1; ++ ++ dsi_core_init(); ++ ++ r = dsi_display_init_dispc(dssdev); ++ if (r) ++ goto err1; ++ ++ r = dsi_display_init_dsi(dssdev); ++ if (r) ++ goto err2; ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ r = dsi_set_te(dssdev, dsi.te_enabled); ++ if (r) ++ goto err2; ++ ++ dsi.update_mode = dsi.user_update_mode; ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(dssdev); ++ ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++ ++err2: ++ dsi_display_uninit_dispc(dssdev); ++err1: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++err0: ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ DSSDBG("dsi_display_resume FAILED\n"); ++ return r; ++} ++ ++static int dsi_display_update(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int r = 0; ++ u16 dw, dh; ++ ++ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) ++ goto end; ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ goto end; ++ ++ dssdev->get_resolution(dssdev, &dw, &dh); ++ ++ if (x > dw || y > dh) ++ goto end; ++ ++ if (x + w > dw) ++ w = dw - x; ++ ++ if (y + h > dh) ++ h = dh - y; ++ ++ if (w == 0 || h == 0) ++ goto end; ++ ++ dsi_set_update_region(dssdev, x, y, w, h); ++ ++ wake_up(&dsi.waitqueue); ++ ++end: ++ mutex_unlock(&dsi.lock); ++ ++ return r; ++} ++ ++static int dsi_display_sync(struct omap_dss_device *dssdev) ++{ ++ bool wait; ++ ++ DSSDBG("dsi_display_sync()\n"); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && ++ dsi.update_region.dirty) { ++ INIT_COMPLETION(dsi.update_completion); ++ wait = true; ++ } else { ++ wait = false; ++ } ++ ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ ++ if (wait) ++ wait_for_completion_interruptible(&dsi.update_completion); ++ ++ DSSDBG("dsi_display_sync() done\n"); ++ return 0; ++} ++ ++static int dsi_display_set_update_mode(struct omap_dss_device *dssdev, ++ enum omap_dss_update_mode mode) ++{ ++ DSSDBGF("%d", mode); ++ ++ mutex_lock(&dsi.lock); ++ dsi_bus_lock(); ++ ++ if (dsi.update_mode != mode) { ++ dsi.user_update_mode = mode; ++ dsi.update_mode = mode; ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && ++ mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(dssdev); ++ } ++ ++ dsi_bus_unlock(); ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode dsi_display_get_update_mode( ++ struct omap_dss_device *dssdev) ++{ ++ return dsi.update_mode; ++} ++ ++ ++static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable) ++{ ++ int r = 0; ++ ++ DSSDBGF("%d", enable); ++ ++ if (!dssdev->driver->enable_te) ++ return -ENOENT; ++ ++ dsi_bus_lock(); ++ ++ dsi.te_enabled = enable; ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ goto end; ++ ++ r = dsi_set_te(dssdev, enable); ++end: ++ dsi_bus_unlock(); ++ ++ return r; ++} ++ ++static int dsi_display_get_te(struct omap_dss_device *dssdev) ++{ ++ return dsi.te_enabled; ++} ++ ++static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate) ++{ ++ ++ DSSDBGF("%d", rotate); ++ ++ if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) ++ return -EINVAL; ++ ++ dsi_bus_lock(); ++ dssdev->driver->set_rotate(dssdev, rotate); ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ u16 w, h; ++ /* the display dimensions may have changed, so set a new ++ * update region */ ++ dssdev->get_resolution(dssdev, &w, &h); ++ dsi_set_update_region(dssdev, 0, 0, w, h); ++ } ++ dsi_bus_unlock(); ++ ++ return 0; ++} ++ ++static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev) ++{ ++ if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) ++ return 0; ++ ++ return dssdev->driver->get_rotate(dssdev); ++} ++ ++static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror) ++{ ++ DSSDBGF("%d", mirror); ++ ++ if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) ++ return -EINVAL; ++ ++ dsi_bus_lock(); ++ dssdev->driver->set_mirror(dssdev, mirror); ++ dsi_bus_unlock(); ++ ++ return 0; ++} ++ ++static bool dsi_display_get_mirror(struct omap_dss_device *dssdev) ++{ ++ if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) ++ return 0; ++ ++ return dssdev->driver->get_mirror(dssdev); ++} ++ ++static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num) ++{ ++ int r; ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EIO; ++ ++ DSSDBGF("%d", test_num); ++ ++ dsi_bus_lock(); ++ ++ /* run test first in low speed mode */ ++ dsi_vc_enable_hs(0, 0); ++ ++ if (dssdev->driver->run_test) { ++ r = dssdev->driver->run_test(dssdev, test_num); ++ if (r) ++ goto end; ++ } ++ ++ /* then in high speed */ ++ dsi_vc_enable_hs(0, 1); ++ ++ if (dssdev->driver->run_test) { ++ r = dssdev->driver->run_test(dssdev, test_num); ++ if (r) ++ goto end; ++ } ++ ++end: ++ dsi_vc_enable_hs(0, 1); ++ ++ dsi_bus_unlock(); ++ ++ return r; ++} ++ ++static int dsi_display_memory_read(struct omap_dss_device *dssdev, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int r; ++ ++ DSSDBGF(""); ++ ++ if (!dssdev->driver->memory_read) ++ return -EINVAL; ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EIO; ++ ++ dsi_bus_lock(); ++ ++ r = dssdev->driver->memory_read(dssdev, buf, size, ++ x, y, w, h); ++ ++ dsi_bus_unlock(); ++ ++ return r; ++} ++ ++void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, ++ u32 fifo_size, enum omap_burst_size *burst_size, ++ u32 *fifo_low, u32 *fifo_high) ++{ ++ unsigned burst_size_bytes; ++ ++ *burst_size = OMAP_DSS_BURST_16x32; ++ burst_size_bytes = 16 * 32 / 8; ++ ++ *fifo_high = fifo_size - burst_size_bytes; ++ *fifo_low = 0; ++} ++ ++int dsi_init_display(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("DSI init\n"); ++ ++ dssdev->enable = dsi_display_enable; ++ dssdev->disable = dsi_display_disable; ++ dssdev->suspend = dsi_display_suspend; ++ dssdev->resume = dsi_display_resume; ++ dssdev->update = dsi_display_update; ++ dssdev->sync = dsi_display_sync; ++ dssdev->set_update_mode = dsi_display_set_update_mode; ++ dssdev->get_update_mode = dsi_display_get_update_mode; ++ dssdev->enable_te = dsi_display_enable_te; ++ dssdev->get_te = dsi_display_get_te; ++ ++ dssdev->get_rotate = dsi_display_get_rotate; ++ dssdev->set_rotate = dsi_display_set_rotate; ++ ++ dssdev->get_mirror = dsi_display_get_mirror; ++ dssdev->set_mirror = dsi_display_set_mirror; ++ ++ dssdev->run_test = dsi_display_run_test; ++ dssdev->memory_read = dsi_display_memory_read; ++ ++ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++ ++ dsi.vc[0].dssdev = dssdev; ++ dsi.vc[1].dssdev = dssdev; ++ ++ return 0; ++} ++ ++int dsi_init(struct platform_device *pdev) ++{ ++ u32 rev; ++ struct sched_param param = { ++ .sched_priority = MAX_USER_RT_PRIO-1 ++ }; ++ ++ spin_lock_init(&dsi.errors_lock); ++ dsi.errors = 0; ++ ++ /* XXX fail properly */ ++ ++ init_completion(&dsi.bta_completion); ++ init_completion(&dsi.update_completion); ++ ++ dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi"); ++ if (IS_ERR(dsi.thread)) { ++ DSSERR("cannot create kthread\n"); ++ return PTR_ERR(dsi.thread); ++ } ++ sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m); ++ ++ init_waitqueue_head(&dsi.waitqueue); ++ spin_lock_init(&dsi.update_lock); ++ ++ mutex_init(&dsi.lock); ++ mutex_init(&dsi.bus_lock); ++ ++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; ++ dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; ++ ++ dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); ++ if (!dsi.base) { ++ DSSERR("can't ioremap DSI\n"); ++ return -ENOMEM; ++ } ++ ++ dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi"); ++ if (IS_ERR(dsi.vdds_dsi_reg)) { ++ iounmap(dsi.base); ++ DSSERR("can't get VDDS_DSI regulator\n"); ++ return PTR_ERR(dsi.vdds_dsi_reg); ++ } ++ ++ enable_clocks(1); ++ ++ rev = dsi_read_reg(DSI_REVISION); ++ printk(KERN_INFO "OMAP DSI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ wake_up_process(dsi.thread); ++ ++ return 0; ++} ++ ++void dsi_exit(void) ++{ ++ kthread_stop(dsi.thread); ++ ++ regulator_put(dsi.vdds_dsi_reg); ++ ++ iounmap(dsi.base); ++ ++ DSSDBG("omap_dsi_exit\n"); ++} ++ +diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c +new file mode 100644 +index 0000000..aab9758 +--- /dev/null ++++ b/drivers/video/omap2/dss/dss.c +@@ -0,0 +1,347 @@ ++/* ++ * linux/drivers/video/omap2/dss/dss.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "DSS" ++ ++#include <linux/kernel.h> ++#include <linux/io.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/seq_file.h> ++ ++#include <mach/display.h> ++#include "dss.h" ++ ++#define DSS_BASE 0x48050000 ++ ++#define DSS_SZ_REGS SZ_512 ++ ++struct dss_reg { ++ u16 idx; ++}; ++ ++#define DSS_REG(idx) ((const struct dss_reg) { idx }) ++ ++#define DSS_REVISION DSS_REG(0x0000) ++#define DSS_SYSCONFIG DSS_REG(0x0010) ++#define DSS_SYSSTATUS DSS_REG(0x0014) ++#define DSS_IRQSTATUS DSS_REG(0x0018) ++#define DSS_CONTROL DSS_REG(0x0040) ++#define DSS_SDI_CONTROL DSS_REG(0x0044) ++#define DSS_PLL_CONTROL DSS_REG(0x0048) ++#define DSS_SDI_STATUS DSS_REG(0x005C) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dss_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) ++ ++static struct { ++ void __iomem *base; ++ ++ u32 ctx[DSS_SZ_REGS / sizeof(u32)]; ++} dss; ++ ++static int _omap_dss_wait_reset(void); ++ ++static inline void dss_write_reg(const struct dss_reg idx, u32 val) ++{ ++ __raw_writel(val, dss.base + idx.idx); ++} ++ ++static inline u32 dss_read_reg(const struct dss_reg idx) ++{ ++ return __raw_readl(dss.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) ++#define RR(reg) \ ++ dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) ++ ++void dss_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(CONTROL); ++ ++#ifdef CONFIG_OMAP2_DSS_SDI ++ SR(SDI_CONTROL); ++ SR(PLL_CONTROL); ++#endif ++} ++ ++void dss_restore_context(void) ++{ ++ if (_omap_dss_wait_reset()) ++ DSSERR("DSS not coming out of reset after sleep\n"); ++ ++ RR(SYSCONFIG); ++ RR(CONTROL); ++ ++#ifdef CONFIG_OMAP2_DSS_SDI ++ RR(SDI_CONTROL); ++ RR(PLL_CONTROL); ++#endif ++} ++ ++#undef SR ++#undef RR ++ ++void dss_sdi_init(u8 datapairs) ++{ ++ u32 l; ++ ++ BUG_ON(datapairs > 3 || datapairs < 1); ++ ++ l = dss_read_reg(DSS_SDI_CONTROL); ++ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ ++ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ ++ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ ++ dss_write_reg(DSS_SDI_CONTROL, l); ++ ++ l = dss_read_reg(DSS_PLL_CONTROL); ++ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ ++ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ ++ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ ++ dss_write_reg(DSS_PLL_CONTROL, l); ++} ++ ++void dss_sdi_enable(void) ++{ ++ dispc_pck_free_enable(1); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ ++ udelay(1); /* wait 2x PCLK */ ++ ++ /* Lock SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ ++ ++ /* Waiting for PLL lock request to complete */ ++ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) ++ ; ++ ++ /* Clearing PLL_GO bit */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); ++ ++ /* Waiting for PLL to lock */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++ ++ dispc_lcd_enable_signal(1); ++ ++ /* Waiting for SDI reset to complete */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2))) ++ ; ++} ++ ++void dss_sdi_disable(void) ++{ ++ dispc_lcd_enable_signal(0); ++ ++ dispc_pck_free_enable(0); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ ++} ++ ++void dss_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DSS_REVISION); ++ DUMPREG(DSS_SYSCONFIG); ++ DUMPREG(DSS_SYSSTATUS); ++ DUMPREG(DSS_IRQSTATUS); ++ DUMPREG(DSS_CONTROL); ++ DUMPREG(DSS_SDI_CONTROL); ++ DUMPREG(DSS_PLL_CONTROL); ++ DUMPREG(DSS_SDI_STATUS); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++void dss_select_clk_source(bool dsi, bool dispc) ++{ ++ u32 r; ++ r = dss_read_reg(DSS_CONTROL); ++ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ ++ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ ++ dss_write_reg(DSS_CONTROL, r); ++} ++ ++int dss_get_dsi_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); ++} ++ ++int dss_get_dispc_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); ++} ++ ++static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) ++{ ++ dispc_irq_handler(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) ++{ ++ u32 irqstatus; ++ ++ irqstatus = dss_read_reg(DSS_IRQSTATUS); ++ ++ if (irqstatus & (1<<0)) /* DISPC_IRQ */ ++ dispc_irq_handler(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ if (irqstatus & (1<<1)) /* DSI_IRQ */ ++ dsi_irq_handler(); ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++static int _omap_dss_wait_reset(void) ++{ ++ unsigned timeout = 1000; ++ ++ while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { ++ udelay(1); ++ if (!--timeout) { ++ DSSERR("soft reset failed\n"); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int _omap_dss_reset(void) ++{ ++ /* Soft reset */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); ++ return _omap_dss_wait_reset(); ++} ++ ++void dss_set_venc_output(enum omap_dss_venc_type type) ++{ ++ int l = 0; ++ ++ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) ++ l = 0; ++ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) ++ l = 1; ++ else ++ BUG(); ++ ++ /* venc out selection. 0 = comp, 1 = svideo */ ++ REG_FLD_MOD(DSS_CONTROL, l, 6, 6); ++} ++ ++void dss_set_dac_pwrdn_bgz(bool enable) ++{ ++ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ ++} ++ ++int dss_init(bool skip_init) ++{ ++ int r; ++ u32 rev; ++ ++ dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); ++ if (!dss.base) { ++ DSSERR("can't ioremap DSS\n"); ++ r = -ENOMEM; ++ goto fail0; ++ } ++ ++ if (!skip_init) { ++ /* disable LCD and DIGIT output. This seems to fix the synclost ++ * problem that we get, if the bootloader starts the DSS and ++ * the kernel resets it */ ++ omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440); ++ ++ /* We need to wait here a bit, otherwise we sometimes start to ++ * get synclost errors, and after that only power cycle will ++ * restore DSS functionality. I have no idea why this happens. ++ * And we have to wait _before_ resetting the DSS, but after ++ * enabling clocks. ++ */ ++ msleep(50); ++ ++ _omap_dss_reset(); ++ } ++ ++ /* autoidle */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); ++ ++ /* Select DPLL */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ ++ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ ++#endif ++ ++ r = request_irq(INT_24XX_DSS_IRQ, ++ cpu_is_omap24xx() ++ ? dss_irq_handler_omap2 ++ : dss_irq_handler_omap3, ++ 0, "OMAP DSS", NULL); ++ ++ if (r < 0) { ++ DSSERR("omap2 dss: request_irq failed\n"); ++ goto fail1; ++ } ++ ++ dss_save_context(); ++ ++ rev = dss_read_reg(DSS_REVISION); ++ printk(KERN_INFO "OMAP DSS rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ return 0; ++ ++fail1: ++ iounmap(dss.base); ++fail0: ++ return r; ++} ++ ++void dss_exit(void) ++{ ++ free_irq(INT_24XX_DSS_IRQ, NULL); ++ ++ iounmap(dss.base); ++} ++ +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +new file mode 100644 +index 0000000..50f7f5f +--- /dev/null ++++ b/drivers/video/omap2/dss/dss.h +@@ -0,0 +1,356 @@ ++/* ++ * linux/drivers/video/omap2/dss/dss.h ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __OMAP2_DSS_H ++#define __OMAP2_DSS_H ++ ++#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++extern unsigned int dss_debug; ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBGF(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \ ++ ": %s(" format ")\n", \ ++ __func__, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBGF(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss: " \ ++ ": %s(" format ")\n", \ ++ __func__, \ ++ ## __VA_ARGS__) ++#endif ++ ++#else /* DEBUG */ ++#define DSSDBG(format, ...) ++#define DSSDBGF(format, ...) ++#endif ++ ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++/* OMAP TRM gives bitfields as start:end, where start is the higher bit ++ number. For example 7:0 */ ++#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end)) ++#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end)) ++#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) ++#define FLD_MOD(orig, val, start, end) \ ++ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) ++ ++#define DISPC_MAX_FCK 173000000 ++ ++enum omap_burst_size { ++ OMAP_DSS_BURST_4x32 = 0, ++ OMAP_DSS_BURST_8x32 = 1, ++ OMAP_DSS_BURST_16x32 = 2, ++}; ++ ++enum omap_parallel_interface_mode { ++ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ ++ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ ++ OMAP_DSS_PARALLELMODE_DSI, ++}; ++ ++enum dss_clock { ++ DSS_CLK_ICK = 1 << 0, ++ DSS_CLK_FCK1 = 1 << 1, ++ DSS_CLK_FCK2 = 1 << 2, ++ DSS_CLK_54M = 1 << 3, ++ DSS_CLK_96M = 1 << 4, ++}; ++ ++struct dispc_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fck; ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ u16 fck_div; ++ u16 lck_div; ++ u16 pck_div; ++}; ++ ++struct dsi_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fint; ++ unsigned long dsiphy; ++ unsigned long clkin; ++ unsigned long dsi1_pll_fclk; ++ unsigned long dsi2_pll_fclk; ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ u16 regn; ++ u16 regm; ++ u16 regm3; ++ u16 regm4; ++ ++ u16 lck_div; ++ u16 pck_div; ++ ++ u8 highfreq; ++ bool use_dss2_fck; ++}; ++ ++struct seq_file; ++struct platform_device; ++ ++/* core */ ++void dss_clk_enable(enum dss_clock clks); ++void dss_clk_disable(enum dss_clock clks); ++unsigned long dss_clk_get_rate(enum dss_clock clk); ++int dss_need_ctx_restore(void); ++void dss_dump_clocks(struct seq_file *s); ++struct bus_type *dss_get_bus(void); ++ ++/* display */ ++int dss_suspend_all_devices(void); ++int dss_resume_all_devices(void); ++ ++void dss_init_device(struct platform_device *pdev, ++ struct omap_dss_device *dssdev); ++void dss_uninit_device(struct platform_device *pdev, ++ struct omap_dss_device *dssdev); ++bool dss_use_replication(struct omap_dss_device *dssdev, ++ enum omap_color_mode mode); ++void default_get_overlay_fifo_thresholds(enum omap_plane plane, ++ u32 fifo_size, enum omap_burst_size *burst_size, ++ u32 *fifo_low, u32 *fifo_high); ++ ++/* manager */ ++int dss_init_overlay_managers(struct platform_device *pdev); ++void dss_uninit_overlay_managers(struct platform_device *pdev); ++int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); ++void dss_setup_partial_planes(struct omap_dss_device *dssdev, ++ u16 *x, u16 *y, u16 *w, u16 *h); ++void dss_start_update(struct omap_dss_device *dssdev); ++ ++/* overlay */ ++void dss_init_overlays(struct platform_device *pdev); ++void dss_uninit_overlays(struct platform_device *pdev); ++int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev); ++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr); ++#ifdef L4_EXAMPLE ++void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr); ++#endif ++void dss_recheck_connections(struct omap_dss_device *dssdev, bool force); ++ ++/* DSS */ ++int dss_init(bool skip_init); ++void dss_exit(void); ++ ++void dss_save_context(void); ++void dss_restore_context(void); ++ ++void dss_dump_regs(struct seq_file *s); ++ ++void dss_sdi_init(u8 datapairs); ++void dss_sdi_enable(void); ++void dss_sdi_disable(void); ++ ++void dss_select_clk_source(bool dsi, bool dispc); ++int dss_get_dsi_clk_source(void); ++int dss_get_dispc_clk_source(void); ++void dss_set_venc_output(enum omap_dss_venc_type type); ++void dss_set_dac_pwrdn_bgz(bool enable); ++ ++/* SDI */ ++int sdi_init(bool skip_init); ++void sdi_exit(void); ++int sdi_init_display(struct omap_dss_device *display); ++ ++/* DSI */ ++int dsi_init(struct platform_device *pdev); ++void dsi_exit(void); ++ ++void dsi_dump_clocks(struct seq_file *s); ++void dsi_dump_regs(struct seq_file *s); ++ ++void dsi_save_context(void); ++void dsi_restore_context(void); ++ ++int dsi_init_display(struct omap_dss_device *display); ++void dsi_irq_handler(void); ++unsigned long dsi_get_dsi1_pll_rate(void); ++unsigned long dsi_get_dsi2_pll_rate(void); ++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo); ++int dsi_pll_program(struct dsi_clock_info *cinfo); ++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv); ++void dsi_pll_uninit(void); ++void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, ++ u32 fifo_size, enum omap_burst_size *burst_size, ++ u32 *fifo_low, u32 *fifo_high); ++ ++/* DPI */ ++int dpi_init(void); ++void dpi_exit(void); ++int dpi_init_display(struct omap_dss_device *dssdev); ++ ++/* DISPC */ ++int dispc_init(void); ++void dispc_exit(void); ++void dispc_dump_clocks(struct seq_file *s); ++void dispc_dump_regs(struct seq_file *s); ++void dispc_irq_handler(void); ++void dispc_fake_vsync_irq(void); ++ ++void dispc_save_context(void); ++void dispc_restore_context(void); ++ ++void dispc_enable_sidle(void); ++void dispc_disable_sidle(void); ++ ++void dispc_lcd_enable_signal_polarity(bool act_high); ++void dispc_lcd_enable_signal(bool enable); ++void dispc_pck_free_enable(bool enable); ++void dispc_enable_fifohandcheck(bool enable); ++ ++void dispc_set_lcd_size(u16 width, u16 height); ++void dispc_set_digit_size(u16 width, u16 height); ++u32 dispc_get_plane_fifo_size(enum omap_plane plane); ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); ++void dispc_enable_fifomerge(bool enable); ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size); ++ ++void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y); ++void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height); ++void dispc_set_channel_out(enum omap_plane plane, ++ enum omap_channel channel_out); ++ ++int dispc_setup_plane(enum omap_plane plane, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ enum omap_dss_rotation_type rotation_type, ++ u8 rotation, bool mirror, ++ u8 global_alpha); ++ ++bool dispc_go_busy(enum omap_channel channel); ++void dispc_go(enum omap_channel channel); ++void dispc_enable_lcd_out(bool enable); ++void dispc_enable_digit_out(bool enable); ++int dispc_enable_plane(enum omap_plane plane, bool enable); ++void dispc_enable_replication(enum omap_plane plane, bool enable); ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); ++void dispc_set_tft_data_lines(u8 data_lines); ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type); ++void dispc_set_loadmode(enum omap_dss_load_mode mode); ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color); ++u32 dispc_get_default_color(enum omap_channel channel); ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_trans_key_type type, ++ u32 trans_key); ++void dispc_get_trans_key(enum omap_channel ch, ++ enum omap_dss_trans_key_type *type, ++ u32 *trans_key); ++void dispc_enable_trans_key(enum omap_channel ch, bool enable); ++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable); ++bool dispc_trans_key_enabled(enum omap_channel ch); ++bool dispc_alpha_blending_enabled(enum omap_channel ch); ++ ++bool dispc_lcd_timings_ok(struct omap_video_timings *timings); ++void dispc_set_lcd_timings(struct omap_video_timings *timings); ++unsigned long dispc_fclk_rate(void); ++unsigned long dispc_lclk_rate(void); ++unsigned long dispc_pclk_rate(void); ++void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb); ++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck, ++ u16 *lck_div, u16 *pck_div); ++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo); ++int dispc_set_clock_div(struct dispc_clock_info *cinfo); ++int dispc_get_clock_div(struct dispc_clock_info *cinfo); ++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div); ++ ++ ++/* VENC */ ++int venc_init(struct platform_device *pdev); ++void venc_exit(void); ++void venc_dump_regs(struct seq_file *s); ++int venc_init_display(struct omap_dss_device *display); ++ ++/* RFBI */ ++int rfbi_init(void); ++void rfbi_exit(void); ++void rfbi_dump_regs(struct seq_file *s); ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++void rfbi_enable_rfbi(bool enable); ++void rfbi_transfer_area(u16 width, u16 height, ++ void (callback)(void *data), void *data); ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); ++unsigned long rfbi_get_max_tx_rate(void); ++int rfbi_init_display(struct omap_dss_device *display); ++ ++#endif +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +new file mode 100644 +index 0000000..7ee0b2b +--- /dev/null ++++ b/drivers/video/omap2/dss/manager.c +@@ -0,0 +1,1487 @@ ++/* ++ * linux/drivers/video/omap2/dss/manager.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "MANAGER" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spinlock.h> ++#include <linux/jiffies.h> ++ ++#include <mach/display.h> ++#include <mach/cpu.h> ++ ++#include "dss.h" ++ ++static int num_managers; ++static struct list_head manager_list; ++ ++static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name); ++} ++ ++static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ mgr->device ? mgr->device->name : "<none>"); ++} ++ ++static ssize_t manager_display_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ int r = 0; ++ size_t len = size; ++ struct omap_dss_device *dssdev = NULL; ++ ++ int match(struct omap_dss_device *dssdev, void *data) ++ { ++ const char *str = data; ++ return sysfs_streq(dssdev->name, str); ++ } ++ ++ if (buf[size-1] == '\n') ++ --len; ++ ++ if (len > 0) ++ dssdev = omap_dss_find_device((void *)buf, match); ++ ++ if (len > 0 && dssdev == NULL) ++ return -EINVAL; ++ ++ if (dssdev) ++ DSSDBG("display %s found\n", dssdev->name); ++ ++ if (mgr->device) { ++ r = mgr->unset_device(mgr); ++ if (r) { ++ DSSERR("failed to unset display\n"); ++ goto put_device; ++ } ++ } ++ ++ if (dssdev) { ++ r = mgr->set_device(mgr, dssdev); ++ if (r) { ++ DSSERR("failed to set manager\n"); ++ goto put_device; ++ } ++ ++ r = mgr->apply(mgr); ++ if (r) { ++ DSSERR("failed to apply dispc config\n"); ++ goto put_device; ++ } ++ } ++ ++put_device: ++ if (dssdev) ++ omap_dss_put_device(dssdev); ++ ++ return r ? r : size; ++} ++ ++static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color); ++} ++ ++static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager_info info; ++ u32 color; ++ int r; ++ ++ if (sscanf(buf, "%d", &color) != 1) ++ return -EINVAL; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ info.default_color = color; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static const char *trans_key_type_str[] = { ++ "gfx-destination", ++ "video-source", ++}; ++ ++static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ enum omap_dss_trans_key_type key_type; ++ ++ key_type = mgr->info.trans_key_type; ++ BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str)); ++ ++ return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]); ++} ++ ++static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ enum omap_dss_trans_key_type key_type; ++ struct omap_overlay_manager_info info; ++ int r; ++ ++ for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST; ++ key_type < ARRAY_SIZE(trans_key_type_str); key_type++) { ++ if (sysfs_streq(buf, trans_key_type_str[key_type])) ++ break; ++ } ++ ++ if (key_type == ARRAY_SIZE(trans_key_type_str)) ++ return -EINVAL; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ info.trans_key_type = key_type; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key); ++} ++ ++static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager_info info; ++ u32 key_value; ++ int r; ++ ++ if (sscanf(buf, "%d", &key_value) != 1) ++ return -EINVAL; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ info.trans_key = key_value; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_enabled); ++} ++ ++static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager_info info; ++ int enable; ++ int r; ++ ++ if (sscanf(buf, "%d", &enable) != 1) ++ return -EINVAL; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ info.trans_enabled = enable ? true : false; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t manager_alpha_blending_enabled_show( ++ struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled); ++} ++ ++static ssize_t manager_alpha_blending_enabled_store( ++ struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager_info info; ++ int enable; ++ int r; ++ ++ if (sscanf(buf, "%d", &enable) != 1) ++ return -EINVAL; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ info.alpha_enabled = enable ? true : false; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ ++ return size; ++} ++ ++struct manager_attribute { ++ struct attribute attr; ++ ssize_t (*show)(struct omap_overlay_manager *, char *); ++ ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t); ++}; ++ ++#define MANAGER_ATTR(_name, _mode, _show, _store) \ ++ struct manager_attribute manager_attr_##_name = \ ++ __ATTR(_name, _mode, _show, _store) ++ ++static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL); ++static MANAGER_ATTR(display, S_IRUGO|S_IWUSR, ++ manager_display_show, manager_display_store); ++static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR, ++ manager_default_color_show, manager_default_color_store); ++static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR, ++ manager_trans_key_type_show, manager_trans_key_type_store); ++static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR, ++ manager_trans_key_value_show, manager_trans_key_value_store); ++static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR, ++ manager_trans_key_enabled_show, ++ manager_trans_key_enabled_store); ++static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR, ++ manager_alpha_blending_enabled_show, ++ manager_alpha_blending_enabled_store); ++ ++ ++static struct attribute *manager_sysfs_attrs[] = { ++ &manager_attr_name.attr, ++ &manager_attr_display.attr, ++ &manager_attr_default_color.attr, ++ &manager_attr_trans_key_type.attr, ++ &manager_attr_trans_key_value.attr, ++ &manager_attr_trans_key_enabled.attr, ++ &manager_attr_alpha_blending_enabled.attr, ++ NULL ++}; ++ ++static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr, ++ char *buf) ++{ ++ struct omap_overlay_manager *manager; ++ struct manager_attribute *manager_attr; ++ ++ manager = container_of(kobj, struct omap_overlay_manager, kobj); ++ manager_attr = container_of(attr, struct manager_attribute, attr); ++ ++ if (!manager_attr->show) ++ return -ENOENT; ++ ++ return manager_attr->show(manager, buf); ++} ++ ++static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager *manager; ++ struct manager_attribute *manager_attr; ++ ++ manager = container_of(kobj, struct omap_overlay_manager, kobj); ++ manager_attr = container_of(attr, struct manager_attribute, attr); ++ ++ if (!manager_attr->store) ++ return -ENOENT; ++ ++ return manager_attr->store(manager, buf, size); ++} ++ ++static struct sysfs_ops manager_sysfs_ops = { ++ .show = manager_attr_show, ++ .store = manager_attr_store, ++}; ++ ++static struct kobj_type manager_ktype = { ++ .sysfs_ops = &manager_sysfs_ops, ++ .default_attrs = manager_sysfs_attrs, ++}; ++ ++/* ++ * We have 4 levels of cache for the dispc settings. First two are in SW and ++ * the latter two in HW. ++ * ++ * +--------------------+ ++ * |overlay/manager_info| ++ * +--------------------+ ++ * v ++ * apply() ++ * v ++ * +--------------------+ ++ * | dss_cache | ++ * +--------------------+ ++ * v ++ * configure() ++ * v ++ * +--------------------+ ++ * | shadow registers | ++ * +--------------------+ ++ * v ++ * VFP or lcd/digit_enable ++ * v ++ * +--------------------+ ++ * | registers | ++ * +--------------------+ ++ */ ++ ++struct overlay_cache_data { ++ /* If true, cache changed, but not written to shadow registers. Set ++ * in apply(), cleared when registers written. */ ++ bool dirty; ++ /* If true, shadow registers contain changed values not yet in real ++ * registers. Set when writing to shadow registers, cleared at ++ * VSYNC/EVSYNC */ ++ bool shadow_dirty; ++ ++ bool enabled; ++ ++ u32 paddr; ++ void __iomem *vaddr; ++ u16 screen_width; ++ u16 width; ++ u16 height; ++ enum omap_color_mode color_mode; ++ u8 rotation; ++ enum omap_dss_rotation_type rotation_type; ++ bool mirror; ++ ++ u16 pos_x; ++ u16 pos_y; ++ u16 out_width; /* if 0, out_width == width */ ++ u16 out_height; /* if 0, out_height == height */ ++ u8 global_alpha; ++ ++ enum omap_channel channel; ++ bool replication; ++ bool ilace; ++ ++ enum omap_burst_size burst_size; ++ u32 fifo_low; ++ u32 fifo_high; ++ ++ bool manual_update; ++}; ++ ++struct manager_cache_data { ++ /* If true, cache changed, but not written to shadow registers. Set ++ * in apply(), cleared when registers written. */ ++ bool dirty; ++ /* If true, shadow registers contain changed values not yet in real ++ * registers. Set when writing to shadow registers, cleared at ++ * VSYNC/EVSYNC */ ++ bool shadow_dirty; ++ ++ u32 default_color; ++ ++ enum omap_dss_trans_key_type trans_key_type; ++ u32 trans_key; ++ bool trans_enabled; ++ ++ bool alpha_enabled; ++ ++ bool manual_upd_display; ++ bool manual_update; ++ bool do_manual_update; ++ ++ /* manual update region */ ++ u16 x, y, w, h; ++}; ++ ++static struct { ++ spinlock_t lock; ++ struct overlay_cache_data overlay_cache[3]; ++ struct manager_cache_data manager_cache[2]; ++ ++ bool irq_enabled; ++} dss_cache; ++ ++ ++ ++static int omap_dss_set_device(struct omap_overlay_manager *mgr, ++ struct omap_dss_device *dssdev) ++{ ++ int i; ++ int r; ++ ++ if (dssdev->manager) { ++ DSSERR("display '%s' already has a manager '%s'\n", ++ dssdev->name, dssdev->manager->name); ++ return -EINVAL; ++ } ++ ++ if ((mgr->supported_displays & dssdev->type) == 0) { ++ DSSERR("display '%s' does not support manager '%s'\n", ++ dssdev->name, mgr->name); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = mgr->overlays[i]; ++ ++ if (ovl->manager != mgr || !ovl->info.enabled) ++ continue; ++ ++ r = dss_check_overlay(ovl, dssdev); ++ if (r) ++ return r; ++ } ++ ++ dssdev->manager = mgr; ++ mgr->device = dssdev; ++ mgr->device_changed = true; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_device(struct omap_overlay_manager *mgr) ++{ ++ if (!mgr->device) { ++ DSSERR("failed to unset display, display not set.\n"); ++ return -EINVAL; ++ } ++ ++ mgr->device->manager = NULL; ++ mgr->device = NULL; ++ mgr->device_changed = true; ++ ++ return 0; ++} ++ ++static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) ++{ ++ unsigned long timeout = msecs_to_jiffies(500); ++ struct manager_cache_data *mc; ++ enum omap_channel channel; ++ u32 irq; ++ int r; ++ int i; ++ ++ if (!mgr->device) ++ return 0; ++ ++ if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) { ++ irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; ++ channel = OMAP_DSS_CHANNEL_DIGIT; ++ } else { ++ if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++ enum omap_dss_update_mode mode; ++ mode = mgr->device->get_update_mode(mgr->device); ++ if (mode != OMAP_DSS_UPDATE_AUTO) ++ return 0; ++ ++ irq = DISPC_IRQ_FRAMEDONE; ++ } else { ++ irq = DISPC_IRQ_VSYNC; ++ } ++ channel = OMAP_DSS_CHANNEL_LCD; ++ } ++ ++ mc = &dss_cache.manager_cache[mgr->id]; ++ i = 0; ++ while (1) { ++ unsigned long flags; ++ bool shadow_dirty, dirty; ++ ++ spin_lock_irqsave(&dss_cache.lock, flags); ++ dirty = mc->dirty; ++ shadow_dirty = mc->shadow_dirty; ++ spin_unlock_irqrestore(&dss_cache.lock, flags); ++ ++ if (!dirty && !shadow_dirty) { ++ r = 0; ++ break; ++ } ++ ++ /* 4 iterations is the worst case: ++ * 1 - initial iteration, dirty = true (between VFP and VSYNC) ++ * 2 - first VSYNC, dirty = true ++ * 3 - dirty = false, shadow_dirty = true ++ * 4 - shadow_dirty = false */ ++ if (i++ == 3) { ++ DSSERR("mgr(%d)->wait_for_go() not finishing\n", ++ mgr->id); ++ r = 0; ++ break; ++ } ++ ++ r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); ++ if (r == -ERESTARTSYS) ++ break; ++ ++ if (r) { ++ DSSERR("mgr(%d)->wait_for_go() timeout\n", mgr->id); ++ break; ++ } ++ } ++ ++ return r; ++} ++ ++int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) ++{ ++ unsigned long timeout = msecs_to_jiffies(500); ++ enum omap_channel channel; ++ struct overlay_cache_data *oc; ++ struct omap_dss_device *dssdev; ++ u32 irq; ++ int r; ++ int i; ++ ++ if (!ovl->manager || !ovl->manager->device) ++ return 0; ++ ++ dssdev = ovl->manager->device; ++ ++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { ++ irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; ++ channel = OMAP_DSS_CHANNEL_DIGIT; ++ } else { ++ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++ enum omap_dss_update_mode mode; ++ mode = dssdev->get_update_mode(dssdev); ++ if (mode != OMAP_DSS_UPDATE_AUTO) ++ return 0; ++ ++ irq = DISPC_IRQ_FRAMEDONE; ++ } else { ++ irq = DISPC_IRQ_VSYNC; ++ } ++ channel = OMAP_DSS_CHANNEL_LCD; ++ } ++ ++ oc = &dss_cache.overlay_cache[ovl->id]; ++ i = 0; ++ while (1) { ++ unsigned long flags; ++ bool shadow_dirty, dirty; ++ ++ spin_lock_irqsave(&dss_cache.lock, flags); ++ dirty = oc->dirty; ++ shadow_dirty = oc->shadow_dirty; ++ spin_unlock_irqrestore(&dss_cache.lock, flags); ++ ++ if (!dirty && !shadow_dirty) { ++ r = 0; ++ break; ++ } ++ ++ /* 4 iterations is the worst case: ++ * 1 - initial iteration, dirty = true (between VFP and VSYNC) ++ * 2 - first VSYNC, dirty = true ++ * 3 - dirty = false, shadow_dirty = true ++ * 4 - shadow_dirty = false */ ++ if (i++ == 3) { ++ DSSERR("ovl(%d)->wait_for_go() not finishing\n", ++ ovl->id); ++ r = 0; ++ break; ++ } ++ ++ r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); ++ if (r == -ERESTARTSYS) ++ break; ++ ++ if (r) { ++ DSSERR("ovl(%d)->wait_for_go() timeout\n", ovl->id); ++ break; ++ } ++ } ++ ++ return r; ++} ++ ++static int overlay_enabled(struct omap_overlay *ovl) ++{ ++ return ovl->info.enabled && ovl->manager && ovl->manager->device; ++} ++ ++/* Is rect1 a subset of rect2? */ ++static bool rectangle_subset(int x1, int y1, int w1, int h1, ++ int x2, int y2, int w2, int h2) ++{ ++ if (x1 < x2 || y1 < y2) ++ return false; ++ ++ if (x1 + w1 > x2 + w2) ++ return false; ++ ++ if (y1 + h1 > y2 + h2) ++ return false; ++ ++ return true; ++} ++ ++/* Do rect1 and rect2 overlap? */ ++static bool rectangle_intersects(int x1, int y1, int w1, int h1, ++ int x2, int y2, int w2, int h2) ++{ ++ if (x1 >= x2 + w2) ++ return false; ++ ++ if (x2 >= x1 + w1) ++ return false; ++ ++ if (y1 >= y2 + h2) ++ return false; ++ ++ if (y2 >= y1 + h1) ++ return false; ++ ++ return true; ++} ++ ++static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc) ++{ ++ if (oc->out_width != 0 && oc->width != oc->out_width) ++ return true; ++ ++ if (oc->out_height != 0 && oc->height != oc->out_height) ++ return true; ++ ++ return false; ++} ++ ++static int configure_overlay(enum omap_plane plane) ++{ ++ struct overlay_cache_data *c; ++ struct manager_cache_data *mc; ++ u16 outw, outh; ++ u16 x, y, w, h; ++ u32 paddr; ++ int r; ++ ++ DSSDBGF("%d", plane); ++ ++ c = &dss_cache.overlay_cache[plane]; ++ ++ if (!c->enabled) { ++ dispc_enable_plane(plane, 0); ++ return 0; ++ } ++ ++ mc = &dss_cache.manager_cache[c->channel]; ++ ++ x = c->pos_x; ++ y = c->pos_y; ++ w = c->width; ++ h = c->height; ++ outw = c->out_width == 0 ? c->width : c->out_width; ++ outh = c->out_height == 0 ? c->height : c->out_height; ++ paddr = c->paddr; ++ ++ if (c->manual_update && mc->do_manual_update) { ++ unsigned bpp; ++ /* If the overlay is outside the update region, disable it */ ++ if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h, ++ x, y, outw, outh)) { ++ dispc_enable_plane(plane, 0); ++ return 0; ++ } ++ ++ switch (c->color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ bpp = 16; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ bpp = 32; ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ if (dispc_is_overlay_scaled(c)) { ++ /* If the overlay is scaled, the update area has ++ * already been enlarged to cover the whole overlay. We ++ * only need to adjust x/y here */ ++ x = c->pos_x - mc->x; ++ y = c->pos_y - mc->y; ++ } else { ++ if (mc->x > c->pos_x) { ++ x = 0; ++ w -= (mc->x - c->pos_x); ++ paddr += (mc->x - c->pos_x) * bpp / 8; ++ } else { ++ x = c->pos_x - mc->x; ++ } ++ ++ if (mc->y > c->pos_y) { ++ y = 0; ++ h -= (mc->y - c->pos_y); ++ paddr += (mc->y - c->pos_y) * c->screen_width * ++ bpp / 8; ++ } else { ++ y = c->pos_y - mc->y; ++ } ++ ++ if (mc->w < (x+w)) ++ w -= (x+w) - (mc->w); ++ ++ if (mc->h < (y+h)) ++ h -= (y+h) - (mc->h); ++ ++ outw = w; ++ outh = h; ++ } ++ } ++ ++ r = dispc_setup_plane(plane, ++ paddr, ++ c->screen_width, ++ x, y, ++ w, h, ++ outw, outh, ++ c->color_mode, ++ c->ilace, ++ c->rotation_type, ++ c->rotation, ++ c->mirror, ++ c->global_alpha); ++ ++ if (r) { ++ /* this shouldn't happen */ ++ DSSERR("dispc_setup_plane failed for ovl %d\n", plane); ++ dispc_enable_plane(plane, 0); ++ return r; ++ } ++ ++ dispc_enable_replication(plane, c->replication); ++ ++ dispc_set_burst_size(plane, c->burst_size); ++ dispc_setup_plane_fifo(plane, c->fifo_low, c->fifo_high); ++ ++ dispc_enable_plane(plane, 1); ++ ++ return 0; ++} ++ ++static void configure_manager(enum omap_channel channel) ++{ ++ struct manager_cache_data *c; ++ ++ DSSDBGF("%d", channel); ++ ++ c = &dss_cache.manager_cache[channel]; ++ ++ dispc_set_trans_key(channel, c->trans_key_type, c->trans_key); ++ dispc_enable_trans_key(channel, c->trans_enabled); ++ dispc_enable_alpha_blending(channel, c->alpha_enabled); ++} ++ ++/* configure_dispc() tries to write values from cache to shadow registers. ++ * It writes only to those managers/overlays that are not busy. ++ * returns 0 if everything could be written to shadow registers. ++ * returns 1 if not everything could be written to shadow registers. */ ++static int configure_dispc(void) ++{ ++ struct overlay_cache_data *oc; ++ struct manager_cache_data *mc; ++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); ++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); ++ int i; ++ int r; ++ bool mgr_busy[2]; ++ bool mgr_go[2]; ++ bool busy; ++ ++ r = 0; ++ busy = false; ++ ++ mgr_busy[0] = dispc_go_busy(0); ++ mgr_busy[1] = dispc_go_busy(1); ++ mgr_go[0] = false; ++ mgr_go[1] = false; ++ ++ /* Commit overlay settings */ ++ for (i = 0; i < num_ovls; ++i) { ++ oc = &dss_cache.overlay_cache[i]; ++ mc = &dss_cache.manager_cache[oc->channel]; ++ ++ if (!oc->dirty) ++ continue; ++ ++ if (oc->manual_update && !mc->do_manual_update) ++ continue; ++ ++ if (mgr_busy[oc->channel]) { ++ busy = true; ++ continue; ++ } ++ ++ r = configure_overlay(i); ++ if (r) ++ DSSERR("configure_overlay %d failed\n", i); ++ ++ oc->dirty = false; ++ oc->shadow_dirty = true; ++ mgr_go[oc->channel] = true; ++ } ++ ++ /* Commit manager settings */ ++ for (i = 0; i < num_mgrs; ++i) { ++ mc = &dss_cache.manager_cache[i]; ++ ++ if (!mc->dirty) ++ continue; ++ ++ if (mc->manual_update && !mc->do_manual_update) ++ continue; ++ ++ if (mgr_busy[i]) { ++ busy = true; ++ continue; ++ } ++ ++ configure_manager(i); ++ mc->dirty = false; ++ mc->shadow_dirty = true; ++ mgr_go[i] = true; ++ } ++ ++ /* set GO */ ++ for (i = 0; i < num_mgrs; ++i) { ++ mc = &dss_cache.manager_cache[i]; ++ ++ if (!mgr_go[i]) ++ continue; ++ ++ /* We don't need GO with manual update display. LCD iface will ++ * always be turned off after frame, and new settings will be ++ * taken in to use at next update */ ++ if (!mc->manual_upd_display) ++ dispc_go(i); ++ } ++ ++ if (busy) ++ r = 1; ++ else ++ r = 0; ++ ++ return r; ++} ++ ++/* Configure dispc for partial update. Return possibly modified update ++ * area */ ++void dss_setup_partial_planes(struct omap_dss_device *dssdev, ++ u16 *xi, u16 *yi, u16 *wi, u16 *hi) ++{ ++ struct overlay_cache_data *oc; ++ struct manager_cache_data *mc; ++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); ++ struct omap_overlay_manager *mgr; ++ int i; ++ u16 x, y, w, h; ++ unsigned long flags; ++ ++ x = *xi; ++ y = *yi; ++ w = *wi; ++ h = *hi; ++ ++ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", ++ *xi, *yi, *wi, *hi); ++ ++ mgr = dssdev->manager; ++ ++ if (!mgr) { ++ DSSDBG("no manager\n"); ++ return; ++ } ++ ++ spin_lock_irqsave(&dss_cache.lock, flags); ++ ++ /* We need to show the whole overlay if it is scaled. So look for ++ * those, and make the update area larger if found. ++ * Also mark the overlay cache dirty */ ++ for (i = 0; i < num_ovls; ++i) { ++ unsigned x1, y1, x2, y2; ++ unsigned outw, outh; ++ ++ oc = &dss_cache.overlay_cache[i]; ++ ++ if (oc->channel != mgr->id) ++ continue; ++ ++ oc->dirty = true; ++ ++ if (!oc->enabled) ++ continue; ++ ++ if (!dispc_is_overlay_scaled(oc)) ++ continue; ++ ++ outw = oc->out_width == 0 ? oc->width : oc->out_width; ++ outh = oc->out_height == 0 ? oc->height : oc->out_height; ++ ++ /* is the overlay outside the update region? */ ++ if (!rectangle_intersects(x, y, w, h, ++ oc->pos_x, oc->pos_y, ++ outw, outh)) ++ continue; ++ ++ /* if the overlay totally inside the update region? */ ++ if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh, ++ x, y, w, h)) ++ continue; ++ ++ if (x > oc->pos_x) ++ x1 = oc->pos_x; ++ else ++ x1 = x; ++ ++ if (y > oc->pos_y) ++ y1 = oc->pos_y; ++ else ++ y1 = y; ++ ++ if ((x + w) < (oc->pos_x + outw)) ++ x2 = oc->pos_x + outw; ++ else ++ x2 = x + w; ++ ++ if ((y + h) < (oc->pos_y + outh)) ++ y2 = oc->pos_y + outh; ++ else ++ y2 = y + h; ++ ++ x = x1; ++ y = y1; ++ w = x2 - x1; ++ h = y2 - y1; ++ ++ DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n", ++ i, x, y, w, h); ++ } ++ ++ mc = &dss_cache.manager_cache[mgr->id]; ++ mc->do_manual_update = true; ++ mc->x = x; ++ mc->y = y; ++ mc->w = w; ++ mc->h = h; ++ ++ configure_dispc(); ++ ++ mc->do_manual_update = false; ++ ++ spin_unlock_irqrestore(&dss_cache.lock, flags); ++ ++ *xi = x; ++ *yi = y; ++ *wi = w; ++ *hi = h; ++} ++ ++void dss_start_update(struct omap_dss_device *dssdev) ++{ ++ struct manager_cache_data *mc; ++ struct overlay_cache_data *oc; ++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); ++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); ++ struct omap_overlay_manager *mgr; ++ int i; ++ ++ mgr = dssdev->manager; ++ ++ for (i = 0; i < num_ovls; ++i) { ++ oc = &dss_cache.overlay_cache[i]; ++ if (oc->channel != mgr->id) ++ continue; ++ ++ oc->shadow_dirty = false; ++ } ++ ++ for (i = 0; i < num_mgrs; ++i) { ++ mc = &dss_cache.manager_cache[i]; ++ if (mgr->id != i) ++ continue; ++ ++ mc->shadow_dirty = false; ++ } ++ ++ dispc_enable_lcd_out(1); ++} ++ ++static void dss_apply_irq_handler(void *data, u32 mask) ++{ ++ struct manager_cache_data *mc; ++ struct overlay_cache_data *oc; ++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); ++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); ++ int i, r; ++ bool mgr_busy[2]; ++ ++ mgr_busy[0] = dispc_go_busy(0); ++ mgr_busy[1] = dispc_go_busy(1); ++ ++ spin_lock(&dss_cache.lock); ++ ++ for (i = 0; i < num_ovls; ++i) { ++ oc = &dss_cache.overlay_cache[i]; ++ if (!mgr_busy[oc->channel]) ++ oc->shadow_dirty = false; ++ } ++ ++ for (i = 0; i < num_mgrs; ++i) { ++ mc = &dss_cache.manager_cache[i]; ++ if (!mgr_busy[i]) ++ mc->shadow_dirty = false; ++ } ++ ++ r = configure_dispc(); ++ if (r == 1) ++ goto end; ++ ++ /* re-read busy flags */ ++ mgr_busy[0] = dispc_go_busy(0); ++ mgr_busy[1] = dispc_go_busy(1); ++ ++ /* keep running as long as there are busy managers, so that ++ * we can collect overlay-applied information */ ++ for (i = 0; i < num_mgrs; ++i) { ++ if (mgr_busy[i]) ++ goto end; ++ } ++ ++ omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, ++ DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | ++ DISPC_IRQ_EVSYNC_EVEN); ++ dss_cache.irq_enabled = false; ++ ++end: ++ spin_unlock(&dss_cache.lock); ++} ++ ++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ++{ ++ struct overlay_cache_data *oc; ++ struct manager_cache_data *mc; ++ int i; ++ struct omap_overlay *ovl; ++ int num_planes_enabled = 0; ++ bool use_fifomerge; ++ unsigned long flags; ++ int r; ++ ++ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); ++ ++ spin_lock_irqsave(&dss_cache.lock, flags); ++ ++ /* Configure overlays */ ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_dss_device *dssdev; ++ ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ oc = &dss_cache.overlay_cache[ovl->id]; ++ ++ if (!overlay_enabled(ovl)) { ++ if (oc->enabled) { ++ oc->enabled = false; ++ oc->dirty = true; ++ } ++ continue; ++ } ++ ++ if (!ovl->info_dirty) { ++ if (oc->enabled) ++ ++num_planes_enabled; ++ continue; ++ } ++ ++ dssdev = ovl->manager->device; ++ ++ if (dss_check_overlay(ovl, dssdev)) { ++ if (oc->enabled) { ++ oc->enabled = false; ++ oc->dirty = true; ++ } ++ continue; ++ } ++ ++ ovl->info_dirty = false; ++ oc->dirty = true; ++ ++ oc->paddr = ovl->info.paddr; ++ oc->vaddr = ovl->info.vaddr; ++ oc->screen_width = ovl->info.screen_width; ++ oc->width = ovl->info.width; ++ oc->height = ovl->info.height; ++ oc->color_mode = ovl->info.color_mode; ++ oc->rotation = ovl->info.rotation; ++ oc->rotation_type = ovl->info.rotation_type; ++ oc->mirror = ovl->info.mirror; ++ oc->pos_x = ovl->info.pos_x; ++ oc->pos_y = ovl->info.pos_y; ++ oc->out_width = ovl->info.out_width; ++ oc->out_height = ovl->info.out_height; ++ oc->global_alpha = ovl->info.global_alpha; ++ ++ oc->replication = ++ dss_use_replication(dssdev, ovl->info.color_mode); ++ ++ oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC; ++ ++ oc->channel = ovl->manager->id; ++ ++ oc->enabled = true; ++ ++ oc->manual_update = ++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && ++ dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; ++ ++ ++num_planes_enabled; ++ } ++ ++ /* Configure managers */ ++ list_for_each_entry(mgr, &manager_list, list) { ++ struct omap_dss_device *dssdev; ++ ++ if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC)) ++ continue; ++ ++ mc = &dss_cache.manager_cache[mgr->id]; ++ ++ if (mgr->device_changed) { ++ mgr->device_changed = false; ++ mgr->info_dirty = true; ++ } ++ ++ if (!mgr->info_dirty) ++ continue; ++ ++ if (!mgr->device) ++ continue; ++ ++ dssdev = mgr->device; ++ ++ mgr->info_dirty = false; ++ mc->dirty = true; ++ ++ mc->default_color = mgr->info.default_color; ++ mc->trans_key_type = mgr->info.trans_key_type; ++ mc->trans_key = mgr->info.trans_key; ++ mc->trans_enabled = mgr->info.trans_enabled; ++ mc->alpha_enabled = mgr->info.alpha_enabled; ++ ++ mc->manual_upd_display = ++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++ ++ mc->manual_update = ++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && ++ dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; ++ } ++ ++ /* XXX TODO: Try to get fifomerge working. The problem is that it ++ * affects both managers, not individually but at the same time. This ++ * means the change has to be well synchronized. I guess the proper way ++ * is to have a two step process for fifo merge: ++ * fifomerge enable: ++ * 1. disable other planes, leaving one plane enabled ++ * 2. wait until the planes are disabled on HW ++ * 3. config merged fifo thresholds, enable fifomerge ++ * fifomerge disable: ++ * 1. config unmerged fifo thresholds, disable fifomerge ++ * 2. wait until fifo changes are in HW ++ * 3. enable planes ++ */ ++ use_fifomerge = false; ++ ++ /* Configure overlay fifos */ ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_dss_device *dssdev; ++ u32 size; ++ ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ oc = &dss_cache.overlay_cache[ovl->id]; ++ ++ if (!oc->enabled) ++ continue; ++ ++ dssdev = ovl->manager->device; ++ ++ size = dispc_get_plane_fifo_size(ovl->id); ++ if (use_fifomerge) ++ size *= 3; ++ ++ switch (dssdev->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_SDI: ++ case OMAP_DISPLAY_TYPE_VENC: ++ default_get_overlay_fifo_thresholds(ovl->id, size, ++ &oc->burst_size, &oc->fifo_low, ++ &oc->fifo_high); ++ break; ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++ dsi_get_overlay_fifo_thresholds(ovl->id, size, ++ &oc->burst_size, &oc->fifo_low, ++ &oc->fifo_high); ++ break; ++#endif ++ default: ++ BUG(); ++ } ++ } ++ ++ r = 0; ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ if (!dss_cache.irq_enabled) { ++ r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, ++ DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | ++ DISPC_IRQ_EVSYNC_EVEN); ++ dss_cache.irq_enabled = true; ++ } ++ configure_dispc(); ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ spin_unlock_irqrestore(&dss_cache.lock, flags); ++ ++ return r; ++} ++ ++static int dss_check_manager(struct omap_overlay_manager *mgr) ++{ ++ /* OMAP supports only graphics source transparency color key and alpha ++ * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */ ++ ++ if (mgr->info.alpha_enabled && mgr->info.trans_enabled && ++ mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int omap_dss_mgr_set_info(struct omap_overlay_manager *mgr, ++ struct omap_overlay_manager_info *info) ++{ ++ int r; ++ struct omap_overlay_manager_info old_info; ++ ++ old_info = mgr->info; ++ mgr->info = *info; ++ ++ r = dss_check_manager(mgr); ++ if (r) { ++ mgr->info = old_info; ++ return r; ++ } ++ ++ mgr->info_dirty = true; ++ ++ return 0; ++} ++ ++static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr, ++ struct omap_overlay_manager_info *info) ++{ ++ *info = mgr->info; ++} ++ ++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) ++{ ++ ++num_managers; ++ list_add_tail(&manager->list, &manager_list); ++} ++ ++int dss_init_overlay_managers(struct platform_device *pdev) ++{ ++ int i, r; ++ ++ spin_lock_init(&dss_cache.lock); ++ ++ INIT_LIST_HEAD(&manager_list); ++ ++ num_managers = 0; ++ ++ for (i = 0; i < 2; ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); ++ ++ BUG_ON(mgr == NULL); ++ ++ switch (i) { ++ case 0: ++ mgr->name = "lcd"; ++ mgr->id = OMAP_DSS_CHANNEL_LCD; ++ mgr->supported_displays = ++ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | ++ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI; ++ break; ++ case 1: ++ mgr->name = "tv"; ++ mgr->id = OMAP_DSS_CHANNEL_DIGIT; ++ mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC; ++ break; ++ } ++ ++ mgr->set_device = &omap_dss_set_device; ++ mgr->unset_device = &omap_dss_unset_device; ++ mgr->apply = &omap_dss_mgr_apply; ++ mgr->set_manager_info = &omap_dss_mgr_set_info; ++ mgr->get_manager_info = &omap_dss_mgr_get_info; ++ mgr->wait_for_go = &dss_mgr_wait_for_go; ++ ++ mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC; ++ ++ dss_overlay_setup_dispc_manager(mgr); ++ ++ omap_dss_add_overlay_manager(mgr); ++ ++ r = kobject_init_and_add(&mgr->kobj, &manager_ktype, ++ &pdev->dev.kobj, "manager%d", i); ++ ++ if (r) { ++ DSSERR("failed to create sysfs file\n"); ++ continue; ++ } ++ } ++ ++#ifdef L4_EXAMPLE ++ { ++ int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr) ++ { ++ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); ++ ++ return 0; ++ } ++ ++ struct omap_overlay_manager *mgr; ++ mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); ++ ++ BUG_ON(mgr == NULL); ++ ++ mgr->name = "l4"; ++ mgr->supported_displays = ++ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI; ++ ++ mgr->set_device = &omap_dss_set_device; ++ mgr->unset_device = &omap_dss_unset_device; ++ mgr->apply = &omap_dss_mgr_apply_l4; ++ mgr->set_manager_info = &omap_dss_mgr_set_info; ++ mgr->get_manager_info = &omap_dss_mgr_get_info; ++ ++ dss_overlay_setup_l4_manager(mgr); ++ ++ omap_dss_add_overlay_manager(mgr); ++ ++ r = kobject_init_and_add(&mgr->kobj, &manager_ktype, ++ &pdev->dev.kobj, "managerl4"); ++ ++ if (r) ++ DSSERR("failed to create sysfs file\n"); ++ } ++#endif ++ ++ return 0; ++} ++ ++void dss_uninit_overlay_managers(struct platform_device *pdev) ++{ ++ struct omap_overlay_manager *mgr; ++ ++ while (!list_empty(&manager_list)) { ++ mgr = list_first_entry(&manager_list, ++ struct omap_overlay_manager, list); ++ list_del(&mgr->list); ++ kobject_del(&mgr->kobj); ++ kobject_put(&mgr->kobj); ++ kfree(mgr); ++ } ++ ++ num_managers = 0; ++} ++ ++int omap_dss_get_num_overlay_managers(void) ++{ ++ return num_managers; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); ++ ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) ++{ ++ int i = 0; ++ struct omap_overlay_manager *mgr; ++ ++ list_for_each_entry(mgr, &manager_list, list) { ++ if (i++ == num) ++ return mgr; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay_manager); ++ +diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c +new file mode 100644 +index 0000000..c7cb81b +--- /dev/null ++++ b/drivers/video/omap2/dss/overlay.c +@@ -0,0 +1,673 @@ ++/* ++ * linux/drivers/video/omap2/dss/overlay.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "OVERLAY" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/err.h> ++#include <linux/sysfs.h> ++#include <linux/kobject.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++ ++#include <mach/display.h> ++ ++#include "dss.h" ++ ++static int num_overlays; ++static struct list_head overlay_list; ++ ++static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name); ++} ++ ++static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ ovl->manager ? ovl->manager->name : "<none>"); ++} ++ ++static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, ++ size_t size) ++{ ++ int i, r; ++ struct omap_overlay_manager *mgr = NULL; ++ struct omap_overlay_manager *old_mgr; ++ int len = size; ++ ++ if (buf[size-1] == '\n') ++ --len; ++ ++ if (len > 0) { ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (strncmp(buf, mgr->name, len) == 0) ++ break; ++ ++ mgr = NULL; ++ } ++ } ++ ++ if (len > 0 && mgr == NULL) ++ return -EINVAL; ++ ++ if (mgr) ++ DSSDBG("manager %s found\n", mgr->name); ++ ++ if (mgr == ovl->manager) ++ return size; ++ ++ old_mgr = ovl->manager; ++ ++ /* detach old manager */ ++ if (old_mgr) { ++ r = ovl->unset_manager(ovl); ++ if (r) { ++ DSSERR("detach failed\n"); ++ return r; ++ } ++ ++ r = old_mgr->apply(old_mgr); ++ if (r) ++ return r; ++ } ++ ++ if (mgr) { ++ r = ovl->set_manager(ovl, mgr); ++ if (r) { ++ DSSERR("Failed to attach overlay\n"); ++ return r; ++ } ++ ++ r = mgr->apply(mgr); ++ if (r) ++ return r; ++ } ++ ++ return size; ++} ++ ++static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.width, ovl->info.height); ++} ++ ++static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width); ++} ++ ++static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.pos_x, ovl->info.pos_y); ++} ++ ++static ssize_t overlay_position_store(struct omap_overlay *ovl, ++ const char *buf, size_t size) ++{ ++ int r; ++ char *last; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.pos_x = simple_strtoul(buf, &last, 10); ++ ++last; ++ if (last - buf >= size) ++ return -EINVAL; ++ ++ info.pos_y = simple_strtoul(last, &last, 10); ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ return r; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ return r; ++ } ++ ++ return size; ++} ++ ++static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.out_width, ovl->info.out_height); ++} ++ ++static ssize_t overlay_output_size_store(struct omap_overlay *ovl, ++ const char *buf, size_t size) ++{ ++ int r; ++ char *last; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.out_width = simple_strtoul(buf, &last, 10); ++ ++last; ++ if (last - buf >= size) ++ return -EINVAL; ++ ++ info.out_height = simple_strtoul(last, &last, 10); ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ return r; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ return r; ++ } ++ ++ return size; ++} ++ ++static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled); ++} ++ ++static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf, ++ size_t size) ++{ ++ int r; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.enabled = simple_strtoul(buf, NULL, 10); ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ return r; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ return r; ++ } ++ ++ return size; ++} ++ ++static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ ovl->info.global_alpha); ++} ++ ++static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl, ++ const char *buf, size_t size) ++{ ++ int r; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ /* Video1 plane does not support global alpha ++ * to always make it 255 completely opaque ++ */ ++ if (ovl->id == OMAP_DSS_VIDEO1) ++ info.global_alpha = 255; ++ else ++ info.global_alpha = simple_strtoul(buf, NULL, 10); ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ return r; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ return r; ++ } ++ ++ return size; ++} ++ ++struct overlay_attribute { ++ struct attribute attr; ++ ssize_t (*show)(struct omap_overlay *, char *); ++ ssize_t (*store)(struct omap_overlay *, const char *, size_t); ++}; ++ ++#define OVERLAY_ATTR(_name, _mode, _show, _store) \ ++ struct overlay_attribute overlay_attr_##_name = \ ++ __ATTR(_name, _mode, _show, _store) ++ ++static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL); ++static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR, ++ overlay_manager_show, overlay_manager_store); ++static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL); ++static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL); ++static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR, ++ overlay_position_show, overlay_position_store); ++static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR, ++ overlay_output_size_show, overlay_output_size_store); ++static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR, ++ overlay_enabled_show, overlay_enabled_store); ++static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR, ++ overlay_global_alpha_show, overlay_global_alpha_store); ++ ++static struct attribute *overlay_sysfs_attrs[] = { ++ &overlay_attr_name.attr, ++ &overlay_attr_manager.attr, ++ &overlay_attr_input_size.attr, ++ &overlay_attr_screen_width.attr, ++ &overlay_attr_position.attr, ++ &overlay_attr_output_size.attr, ++ &overlay_attr_enabled.attr, ++ &overlay_attr_global_alpha.attr, ++ NULL ++}; ++ ++static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr, ++ char *buf) ++{ ++ struct omap_overlay *overlay; ++ struct overlay_attribute *overlay_attr; ++ ++ overlay = container_of(kobj, struct omap_overlay, kobj); ++ overlay_attr = container_of(attr, struct overlay_attribute, attr); ++ ++ if (!overlay_attr->show) ++ return -ENOENT; ++ ++ return overlay_attr->show(overlay, buf); ++} ++ ++static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay *overlay; ++ struct overlay_attribute *overlay_attr; ++ ++ overlay = container_of(kobj, struct omap_overlay, kobj); ++ overlay_attr = container_of(attr, struct overlay_attribute, attr); ++ ++ if (!overlay_attr->store) ++ return -ENOENT; ++ ++ return overlay_attr->store(overlay, buf, size); ++} ++ ++static struct sysfs_ops overlay_sysfs_ops = { ++ .show = overlay_attr_show, ++ .store = overlay_attr_store, ++}; ++ ++static struct kobj_type overlay_ktype = { ++ .sysfs_ops = &overlay_sysfs_ops, ++ .default_attrs = overlay_sysfs_attrs, ++}; ++ ++/* Check if overlay parameters are compatible with display */ ++int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev) ++{ ++ struct omap_overlay_info *info; ++ u16 outw, outh; ++ u16 dw, dh; ++ ++ if (!dssdev) ++ return 0; ++ ++ if (!ovl->info.enabled) ++ return 0; ++ ++ info = &ovl->info; ++ ++ if (info->paddr == 0) { ++ DSSDBG("check_overlay failed: paddr 0\n"); ++ return -EINVAL; ++ } ++ ++ dssdev->get_resolution(dssdev, &dw, &dh); ++ ++ DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n", ++ ovl->id, ++ info->pos_x, info->pos_y, ++ info->width, info->height, ++ info->out_width, info->out_height, ++ dw, dh); ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = info->width; ++ outh = info->height; ++ } else { ++ if (info->out_width == 0) ++ outw = info->width; ++ else ++ outw = info->out_width; ++ ++ if (info->out_height == 0) ++ outh = info->height; ++ else ++ outh = info->out_height; ++ } ++ ++ if (dw < info->pos_x + outw) { ++ DSSDBG("check_overlay failed 1: %d < %d + %d\n", ++ dw, info->pos_x, outw); ++ return -EINVAL; ++ } ++ ++ if (dh < info->pos_y + outh) { ++ DSSDBG("check_overlay failed 2: %d < %d + %d\n", ++ dh, info->pos_y, outh); ++ return -EINVAL; ++ } ++ ++ if ((ovl->supported_modes & info->color_mode) == 0) { ++ DSSERR("overlay doesn't support mode %d\n", info->color_mode); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, ++ struct omap_overlay_info *info) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ old_info = ovl->info; ++ ovl->info = *info; ++ ++ if (ovl->manager) { ++ r = dss_check_overlay(ovl, ovl->manager->device); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ ovl->info_dirty = true; ++ ++ return 0; ++} ++ ++static void dss_ovl_get_overlay_info(struct omap_overlay *ovl, ++ struct omap_overlay_info *info) ++{ ++ *info = ovl->info; ++} ++ ++static int dss_ovl_wait_for_go(struct omap_overlay *ovl) ++{ ++ return dss_mgr_wait_for_go_ovl(ovl); ++} ++ ++static int omap_dss_set_manager(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr) ++{ ++ if (!mgr) ++ return -EINVAL; ++ ++ if (ovl->manager) { ++ DSSERR("overlay '%s' already has a manager '%s'\n", ++ ovl->name, ovl->manager->name); ++ return -EINVAL; ++ } ++ ++ if (ovl->info.enabled) { ++ DSSERR("overlay has to be disabled to change the manager\n"); ++ return -EINVAL; ++ } ++ ++ ovl->manager = mgr; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ /* XXX: on manual update display, in auto update mode, a bug happens ++ * here. When an overlay is first enabled on LCD, then it's disabled, ++ * and the manager is changed to TV, we sometimes get SYNC_LOST_DIGIT ++ * errors. Waiting before changing the channel_out fixes it. I'm ++ * guessing that the overlay is still somehow being used for the LCD, ++ * but I don't understand how or why. */ ++ msleep(40); ++ dispc_set_channel_out(ovl->id, mgr->id); ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ return 0; ++} ++ ++static int omap_dss_unset_manager(struct omap_overlay *ovl) ++{ ++ int r; ++ ++ if (!ovl->manager) { ++ DSSERR("failed to detach overlay: manager not set\n"); ++ return -EINVAL; ++ } ++ ++ if (ovl->info.enabled) { ++ DSSERR("overlay has to be disabled to unset the manager\n"); ++ return -EINVAL; ++ } ++ ++ r = ovl->wait_for_go(ovl); ++ if (r) ++ return r; ++ ++ ovl->manager = NULL; ++ ++ return 0; ++} ++ ++int omap_dss_get_num_overlays(void) ++{ ++ return num_overlays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlays); ++ ++struct omap_overlay *omap_dss_get_overlay(int num) ++{ ++ int i = 0; ++ struct omap_overlay *ovl; ++ ++ list_for_each_entry(ovl, &overlay_list, list) { ++ if (i++ == num) ++ return ovl; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay); ++ ++static void omap_dss_add_overlay(struct omap_overlay *overlay) ++{ ++ ++num_overlays; ++ list_add_tail(&overlay->list, &overlay_list); ++} ++ ++static struct omap_overlay *dispc_overlays[3]; ++ ++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr) ++{ ++ mgr->num_overlays = 3; ++ mgr->overlays = dispc_overlays; ++} ++ ++#ifdef L4_EXAMPLE ++static struct omap_overlay *l4_overlays[1]; ++void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr) ++{ ++ mgr->num_overlays = 1; ++ mgr->overlays = l4_overlays; ++} ++#endif ++ ++void dss_init_overlays(struct platform_device *pdev) ++{ ++ int i, r; ++ ++ INIT_LIST_HEAD(&overlay_list); ++ ++ num_overlays = 0; ++ ++ for (i = 0; i < 3; ++i) { ++ struct omap_overlay *ovl; ++ ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); ++ ++ BUG_ON(ovl == NULL); ++ ++ switch (i) { ++ case 0: ++ ovl->name = "gfx"; ++ ovl->id = OMAP_DSS_GFX; ++ ovl->supported_modes = OMAP_DSS_COLOR_GFX_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_DISPC; ++ ovl->info.global_alpha = 255; ++ break; ++ case 1: ++ ovl->name = "vid1"; ++ ovl->id = OMAP_DSS_VIDEO1; ++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE | ++ OMAP_DSS_OVL_CAP_DISPC; ++ ovl->info.global_alpha = 255; ++ break; ++ case 2: ++ ovl->name = "vid2"; ++ ovl->id = OMAP_DSS_VIDEO2; ++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE | ++ OMAP_DSS_OVL_CAP_DISPC; ++ ovl->info.global_alpha = 255; ++ break; ++ } ++ ++ ovl->set_manager = &omap_dss_set_manager; ++ ovl->unset_manager = &omap_dss_unset_manager; ++ ovl->set_overlay_info = &dss_ovl_set_overlay_info; ++ ovl->get_overlay_info = &dss_ovl_get_overlay_info; ++ ovl->wait_for_go = &dss_ovl_wait_for_go; ++ ++ omap_dss_add_overlay(ovl); ++ ++ r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, ++ &pdev->dev.kobj, "overlay%d", i); ++ ++ if (r) { ++ DSSERR("failed to create sysfs file\n"); ++ continue; ++ } ++ ++ dispc_overlays[i] = ovl; ++ } ++ ++#ifdef L4_EXAMPLE ++ { ++ struct omap_overlay *ovl; ++ ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); ++ ++ BUG_ON(ovl == NULL); ++ ++ ovl->name = "l4"; ++ ovl->supported_modes = OMAP_DSS_COLOR_RGB24U; ++ ++ ovl->set_manager = &omap_dss_set_manager; ++ ovl->unset_manager = &omap_dss_unset_manager; ++ ovl->set_overlay_info = &dss_ovl_set_overlay_info; ++ ovl->get_overlay_info = &dss_ovl_get_overlay_info; ++ ++ omap_dss_add_overlay(ovl); ++ ++ r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, ++ &pdev->dev.kobj, "overlayl4"); ++ ++ if (r) ++ DSSERR("failed to create sysfs file\n"); ++ ++ l4_overlays[0] = ovl; ++ } ++#endif ++} ++ ++/* connect overlays to the new device, if not already connected. if force ++ * selected, connect always. */ ++void dss_recheck_connections(struct omap_dss_device *dssdev, bool force) ++{ ++ int i; ++ struct omap_overlay_manager *lcd_mgr; ++ struct omap_overlay_manager *tv_mgr; ++ struct omap_overlay_manager *mgr = NULL; ++ ++ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); ++ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); ++ ++ if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) { ++ if (!lcd_mgr->device || force) { ++ if (lcd_mgr->device) ++ lcd_mgr->unset_device(lcd_mgr); ++ lcd_mgr->set_device(lcd_mgr, dssdev); ++ mgr = lcd_mgr; ++ } ++ } ++ ++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { ++ if (!tv_mgr->device || force) { ++ if (tv_mgr->device) ++ tv_mgr->unset_device(tv_mgr); ++ tv_mgr->set_device(tv_mgr, dssdev); ++ mgr = tv_mgr; ++ } ++ } ++ ++ if (mgr) { ++ for (i = 0; i < 3; i++) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ if (!ovl->manager || force) { ++ if (ovl->manager) ++ omap_dss_unset_manager(ovl); ++ omap_dss_set_manager(ovl, mgr); ++ } ++ } ++ } ++} ++ ++void dss_uninit_overlays(struct platform_device *pdev) ++{ ++ struct omap_overlay *ovl; ++ ++ while (!list_empty(&overlay_list)) { ++ ovl = list_first_entry(&overlay_list, ++ struct omap_overlay, list); ++ list_del(&ovl->list); ++ kobject_del(&ovl->kobj); ++ kobject_put(&ovl->kobj); ++ kfree(ovl); ++ } ++ ++ num_overlays = 0; ++} ++ +diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c +new file mode 100644 +index 0000000..9dd2349 +--- /dev/null ++++ b/drivers/video/omap2/dss/rfbi.c +@@ -0,0 +1,1310 @@ ++/* ++ * linux/drivers/video/omap2/dss/rfbi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "RFBI" ++ ++#include <linux/kernel.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++#include <linux/delay.h> ++#include <linux/kfifo.h> ++#include <linux/ktime.h> ++#include <linux/hrtimer.h> ++#include <linux/seq_file.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include "dss.h" ++ ++/*#define MEASURE_PERF*/ ++ ++#define RFBI_BASE 0x48050800 ++ ++struct rfbi_reg { u16 idx; }; ++ ++#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) ++ ++#define RFBI_REVISION RFBI_REG(0x0000) ++#define RFBI_SYSCONFIG RFBI_REG(0x0010) ++#define RFBI_SYSSTATUS RFBI_REG(0x0014) ++#define RFBI_CONTROL RFBI_REG(0x0040) ++#define RFBI_PIXEL_CNT RFBI_REG(0x0044) ++#define RFBI_LINE_NUMBER RFBI_REG(0x0048) ++#define RFBI_CMD RFBI_REG(0x004c) ++#define RFBI_PARAM RFBI_REG(0x0050) ++#define RFBI_DATA RFBI_REG(0x0054) ++#define RFBI_READ RFBI_REG(0x0058) ++#define RFBI_STATUS RFBI_REG(0x005c) ++ ++#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) ++#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) ++#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) ++#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) ++#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) ++#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) ++ ++#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) ++#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) ++ ++#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) ++ ++/* To work around an RFBI transfer rate limitation */ ++#define OMAP_RFBI_RATE_LIMIT 1 ++ ++enum omap_rfbi_cycleformat { ++ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, ++ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, ++}; ++ ++enum omap_rfbi_datatype { ++ OMAP_DSS_RFBI_DATATYPE_12 = 0, ++ OMAP_DSS_RFBI_DATATYPE_16 = 1, ++ OMAP_DSS_RFBI_DATATYPE_18 = 2, ++ OMAP_DSS_RFBI_DATATYPE_24 = 3, ++}; ++ ++enum omap_rfbi_parallelmode { ++ OMAP_DSS_RFBI_PARALLELMODE_8 = 0, ++ OMAP_DSS_RFBI_PARALLELMODE_9 = 1, ++ OMAP_DSS_RFBI_PARALLELMODE_12 = 2, ++ OMAP_DSS_RFBI_PARALLELMODE_16 = 3, ++}; ++ ++enum update_cmd { ++ RFBI_CMD_UPDATE = 0, ++ RFBI_CMD_SYNC = 1, ++}; ++ ++static int rfbi_convert_timings(struct rfbi_timings *t); ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); ++static void process_cmd_fifo(void); ++ ++static struct { ++ void __iomem *base; ++ ++ unsigned long l4_khz; ++ ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ enum omap_rfbi_te_mode te_mode; ++ int te_enabled; ++ ++ void (*framedone_callback)(void *data); ++ void *framedone_callback_data; ++ ++ struct omap_dss_device *dssdev[2]; ++ ++ struct kfifo *cmd_fifo; ++ spinlock_t cmd_lock; ++ struct completion cmd_done; ++ atomic_t cmd_fifo_full; ++ atomic_t cmd_pending; ++#ifdef MEASURE_PERF ++ unsigned perf_bytes; ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++#endif ++} rfbi; ++ ++struct update_region { ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++}; ++ ++struct update_param { ++ u8 rfbi_module; ++ u8 cmd; ++ ++ union { ++ struct update_region r; ++ struct completion *sync; ++ } par; ++}; ++ ++static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) ++{ ++ __raw_writel(val, rfbi.base + idx.idx); ++} ++ ++static inline u32 rfbi_read_reg(const struct rfbi_reg idx) ++{ ++ return __raw_readl(rfbi.base + idx.idx); ++} ++ ++static void rfbi_enable_clocks(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++void omap_rfbi_write_command(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_CMD, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_CMD, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_command); ++ ++void omap_rfbi_read_data(void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ u8 *b = buf; ++ for (; len; len--) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *b++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ u16 *w = buf; ++ BUG_ON(len & ~1); ++ for (; len; len -= 2) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *w++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_read_data); ++ ++void omap_rfbi_write_data(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_PARAM, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_PARAM, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_data); ++ ++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, ++ u16 x, u16 y, ++ u16 w, u16 h) ++{ ++ int start_offset = scr_width * y + x; ++ int horiz_offset = scr_width - w; ++ int i; ++ ++ rfbi_enable_clocks(1); ++ ++ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u16 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 __iomem *b = (const u8 __iomem *)pd; ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u32 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 __iomem *b = (const u8 __iomem *)pd; ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { ++ const u16 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else { ++ BUG(); ++ } ++ ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_pixels); ++ ++#ifdef MEASURE_PERF ++static void perf_mark_setup(void) ++{ ++ rfbi.perf_setup_time = ktime_get(); ++} ++ ++static void perf_mark_start(void) ++{ ++ rfbi.perf_start_time = ktime_get(); ++} ++ ++static void perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, rfbi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = rfbi.perf_bytes; ++ ++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " ++ "%u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++} ++#else ++#define perf_mark_setup() ++#define perf_mark_start() ++#define perf_show(x) ++#endif ++ ++void rfbi_transfer_area(u16 width, u16 height, ++ void (callback)(void *data), void *data) ++{ ++ u32 l; ++ ++ /*BUG_ON(callback == 0);*/ ++ BUG_ON(rfbi.framedone_callback != NULL); ++ ++ DSSDBG("rfbi_transfer_area %dx%d\n", width, height); ++ ++ dispc_set_lcd_size(width, height); ++ ++ dispc_enable_lcd_out(1); ++ ++ rfbi.framedone_callback = callback; ++ rfbi.framedone_callback_data = data; ++ ++ rfbi_enable_clocks(1); ++ ++ rfbi_write_reg(RFBI_PIXEL_CNT, width * height); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, 1, 0, 0); /* enable */ ++ if (!rfbi.te_enabled) ++ l = FLD_MOD(l, 1, 4, 4); /* ITE */ ++ ++ perf_mark_start(); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ void (*callback)(void *data); ++ ++ DSSDBG("FRAMEDONE\n"); ++ ++ perf_show("DISPC"); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); ++ ++ rfbi_enable_clocks(0); ++ ++ callback = rfbi.framedone_callback; ++ rfbi.framedone_callback = NULL; ++ ++ /*callback(rfbi.framedone_callback_data);*/ ++ ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ process_cmd_fifo(); ++} ++ ++#if 1 /* VERBOSE */ ++static void rfbi_print_timings(void) ++{ ++ u32 l; ++ u32 time; ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ time = 1000000000 / rfbi.l4_khz; ++ if (l & (1 << 4)) ++ time *= 2; ++ ++ DSSDBG("Tick time %u ps\n", time); ++ l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); ++ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " ++ "REONTIME %d, REOFFTIME %d\n", ++ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, ++ (l >> 20) & 0x0f, (l >> 24) & 0x3f); ++ ++ l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); ++ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " ++ "ACCESSTIME %d\n", ++ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, ++ (l >> 22) & 0x3f); ++} ++#else ++static void rfbi_print_timings(void) {} ++#endif ++ ++ ++ ++ ++static u32 extif_clk_period; ++ ++static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) ++{ ++ int bus_tick = extif_clk_period * div; ++ return (ps + bus_tick - 1) / bus_tick * bus_tick; ++} ++ ++static int calc_reg_timing(struct rfbi_timings *t, int div) ++{ ++ t->clk_div = div; ++ ++ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); ++ ++ t->we_on_time = round_to_extif_ticks(t->we_on_time, div); ++ t->we_off_time = round_to_extif_ticks(t->we_off_time, div); ++ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); ++ ++ t->re_on_time = round_to_extif_ticks(t->re_on_time, div); ++ t->re_off_time = round_to_extif_ticks(t->re_off_time, div); ++ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); ++ ++ t->access_time = round_to_extif_ticks(t->access_time, div); ++ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); ++ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); ++ ++ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", ++ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); ++ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", ++ t->we_on_time, t->we_off_time, t->re_cycle_time, ++ t->we_cycle_time); ++ DSSDBG("[reg]rdaccess %d cspulse %d\n", ++ t->access_time, t->cs_pulse_width); ++ ++ return rfbi_convert_timings(t); ++} ++ ++static int calc_extif_timings(struct rfbi_timings *t) ++{ ++ u32 max_clk_div; ++ int div; ++ ++ rfbi_get_clk_info(&extif_clk_period, &max_clk_div); ++ for (div = 1; div <= max_clk_div; div++) { ++ if (calc_reg_timing(t, div) == 0) ++ break; ++ } ++ ++ if (div <= max_clk_div) ++ return 0; ++ ++ DSSERR("can't setup timings\n"); ++ return -1; ++} ++ ++ ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) ++{ ++ int r; ++ ++ if (!t->converted) { ++ r = calc_extif_timings(t); ++ if (r < 0) ++ DSSERR("Failed to calc timings\n"); ++ } ++ ++ BUG_ON(!t->converted); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); ++ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); ++ ++ /* TIMEGRANULARITY */ ++ REG_FLD_MOD(RFBI_CONFIG(rfbi_module), ++ (t->tim[2] ? 1 : 0), 4, 4); ++ ++ rfbi_print_timings(); ++ rfbi_enable_clocks(0); ++} ++ ++static int ps_to_rfbi_ticks(int time, int div) ++{ ++ unsigned long tick_ps; ++ int ret; ++ ++ /* Calculate in picosecs to yield more exact results */ ++ tick_ps = 1000000000 / (rfbi.l4_khz) * div; ++ ++ ret = (time + tick_ps - 1) / tick_ps; ++ ++ return ret; ++} ++ ++#ifdef OMAP_RFBI_RATE_LIMIT ++unsigned long rfbi_get_max_tx_rate(void) ++{ ++ unsigned long l4_rate, dss1_rate; ++ int min_l4_ticks = 0; ++ int i; ++ ++ /* According to TI this can't be calculated so make the ++ * adjustments for a couple of known frequencies and warn for ++ * others. ++ */ ++ static const struct { ++ unsigned long l4_clk; /* HZ */ ++ unsigned long dss1_clk; /* HZ */ ++ unsigned long min_l4_ticks; ++ } ftab[] = { ++ { 55, 132, 7, }, /* 7.86 MPix/s */ ++ { 110, 110, 12, }, /* 9.16 MPix/s */ ++ { 110, 132, 10, }, /* 11 Mpix/s */ ++ { 120, 120, 10, }, /* 12 Mpix/s */ ++ { 133, 133, 10, }, /* 13.3 Mpix/s */ ++ }; ++ ++ l4_rate = rfbi.l4_khz / 1000; ++ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; ++ ++ for (i = 0; i < ARRAY_SIZE(ftab); i++) { ++ /* Use a window instead of an exact match, to account ++ * for different DPLL multiplier / divider pairs. ++ */ ++ if (abs(ftab[i].l4_clk - l4_rate) < 3 && ++ abs(ftab[i].dss1_clk - dss1_rate) < 3) { ++ min_l4_ticks = ftab[i].min_l4_ticks; ++ break; ++ } ++ } ++ if (i == ARRAY_SIZE(ftab)) { ++ /* Can't be sure, return anyway the maximum not ++ * rate-limited. This might cause a problem only for the ++ * tearing synchronisation. ++ */ ++ DSSERR("can't determine maximum RFBI transfer rate\n"); ++ return rfbi.l4_khz * 1000; ++ } ++ return rfbi.l4_khz * 1000 / min_l4_ticks; ++} ++#else ++int rfbi_get_max_tx_rate(void) ++{ ++ return rfbi.l4_khz * 1000; ++} ++#endif ++ ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) ++{ ++ *clk_period = 1000000000 / rfbi.l4_khz; ++ *max_clk_div = 2; ++} ++ ++static int rfbi_convert_timings(struct rfbi_timings *t) ++{ ++ u32 l; ++ int reon, reoff, weon, weoff, cson, csoff, cs_pulse; ++ int actim, recyc, wecyc; ++ int div = t->clk_div; ++ ++ if (div <= 0 || div > 2) ++ return -1; ++ ++ /* Make sure that after conversion it still holds that: ++ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, ++ * csoff > cson, csoff >= max(weoff, reoff), actim > reon ++ */ ++ weon = ps_to_rfbi_ticks(t->we_on_time, div); ++ weoff = ps_to_rfbi_ticks(t->we_off_time, div); ++ if (weoff <= weon) ++ weoff = weon + 1; ++ if (weon > 0x0f) ++ return -1; ++ if (weoff > 0x3f) ++ return -1; ++ ++ reon = ps_to_rfbi_ticks(t->re_on_time, div); ++ reoff = ps_to_rfbi_ticks(t->re_off_time, div); ++ if (reoff <= reon) ++ reoff = reon + 1; ++ if (reon > 0x0f) ++ return -1; ++ if (reoff > 0x3f) ++ return -1; ++ ++ cson = ps_to_rfbi_ticks(t->cs_on_time, div); ++ csoff = ps_to_rfbi_ticks(t->cs_off_time, div); ++ if (csoff <= cson) ++ csoff = cson + 1; ++ if (csoff < max(weoff, reoff)) ++ csoff = max(weoff, reoff); ++ if (cson > 0x0f) ++ return -1; ++ if (csoff > 0x3f) ++ return -1; ++ ++ l = cson; ++ l |= csoff << 4; ++ l |= weon << 10; ++ l |= weoff << 14; ++ l |= reon << 20; ++ l |= reoff << 24; ++ ++ t->tim[0] = l; ++ ++ actim = ps_to_rfbi_ticks(t->access_time, div); ++ if (actim <= reon) ++ actim = reon + 1; ++ if (actim > 0x3f) ++ return -1; ++ ++ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); ++ if (wecyc < weoff) ++ wecyc = weoff; ++ if (wecyc > 0x3f) ++ return -1; ++ ++ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); ++ if (recyc < reoff) ++ recyc = reoff; ++ if (recyc > 0x3f) ++ return -1; ++ ++ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); ++ if (cs_pulse > 0x3f) ++ return -1; ++ ++ l = wecyc; ++ l |= recyc << 6; ++ l |= cs_pulse << 12; ++ l |= actim << 22; ++ ++ t->tim[1] = l; ++ ++ t->tim[2] = div - 1; ++ ++ t->converted = 1; ++ ++ return 0; ++} ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div) ++{ ++ int hs, vs; ++ int min; ++ u32 l; ++ ++ hs = ps_to_rfbi_ticks(hs_pulse_time, 1); ++ vs = ps_to_rfbi_ticks(vs_pulse_time, 1); ++ if (hs < 2) ++ return -EDOM; ++ if (mode == OMAP_DSS_RFBI_TE_MODE_2) ++ min = 2; ++ else /* OMAP_DSS_RFBI_TE_MODE_1 */ ++ min = 4; ++ if (vs < min) ++ return -EDOM; ++ if (vs == hs) ++ return -EINVAL; ++ rfbi.te_mode = mode; ++ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", ++ mode, hs, vs, hs_pol_inv, vs_pol_inv); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); ++ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ if (hs_pol_inv) ++ l &= ~(1 << 21); ++ else ++ l |= 1 << 21; ++ if (vs_pol_inv) ++ l &= ~(1 << 20); ++ else ++ l |= 1 << 20; ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_setup_te); ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_enable_te(bool enable, unsigned line) ++{ ++ u32 l; ++ ++ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); ++ if (line > (1 << 11) - 1) ++ return -EINVAL; ++ ++ rfbi_enable_clocks(1); ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l &= ~(0x3 << 2); ++ if (enable) { ++ rfbi.te_enabled = 1; ++ l |= rfbi.te_mode << 2; ++ } else ++ rfbi.te_enabled = 0; ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ rfbi_write_reg(RFBI_LINE_NUMBER, line); ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_enable_te); ++ ++#if 0 ++static void rfbi_enable_config(int enable1, int enable2) ++{ ++ u32 l; ++ int cs = 0; ++ ++ if (enable1) ++ cs |= 1<<0; ++ if (enable2) ++ cs |= 1<<1; ++ ++ rfbi_enable_clocks(1); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ ++ l = FLD_MOD(l, cs, 3, 2); ++ l = FLD_MOD(l, 0, 1, 1); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ ++ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ ++ ++ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ ++ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ ++ ++ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ ++ rfbi_enable_clocks(0); ++} ++#endif ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines) ++{ ++ u32 l; ++ int cycle1 = 0, cycle2 = 0, cycle3 = 0; ++ enum omap_rfbi_cycleformat cycleformat; ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ switch (bpp) { ++ case 12: ++ datatype = OMAP_DSS_RFBI_DATATYPE_12; ++ break; ++ case 16: ++ datatype = OMAP_DSS_RFBI_DATATYPE_16; ++ break; ++ case 18: ++ datatype = OMAP_DSS_RFBI_DATATYPE_18; ++ break; ++ case 24: ++ datatype = OMAP_DSS_RFBI_DATATYPE_24; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.datatype = datatype; ++ ++ switch (lines) { ++ case 8: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; ++ break; ++ case 9: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; ++ break; ++ case 12: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; ++ break; ++ case 16: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.parallelmode = parallelmode; ++ ++ if ((bpp % lines) == 0) { ++ switch (bpp / lines) { ++ case 1: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; ++ break; ++ case 2: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; ++ break; ++ case 3: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ } else if ((2 * bpp % lines) == 0) { ++ if ((2 * bpp / lines) == 3) ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; ++ else { ++ BUG(); ++ return 1; ++ } ++ } else { ++ BUG(); ++ return 1; ++ } ++ ++ switch (cycleformat) { ++ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: ++ cycle1 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ cycle3 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: ++ cycle1 = lines; ++ cycle2 = (lines / 2) | ((lines / 2) << 16); ++ cycle3 = (lines << 16); ++ break; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ ++ ++ l = 0; ++ l |= FLD_VAL(parallelmode, 1, 0); ++ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ ++ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ ++ l |= FLD_VAL(datatype, 6, 5); ++ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ ++ l |= FLD_VAL(cycleformat, 10, 9); ++ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ ++ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ ++ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ ++ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ ++ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ ++ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ ++ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); ++ ++ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); ++ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); ++ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); ++ ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ ++ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", ++ bpp, lines, cycle1, cycle2, cycle3); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(rfbi_configure); ++ ++static int rfbi_find_display(struct omap_dss_device *dssdev) ++{ ++ if (dssdev == rfbi.dssdev[0]) ++ return 0; ++ ++ if (dssdev == rfbi.dssdev[1]) ++ return 1; ++ ++ BUG(); ++ return -1; ++} ++ ++ ++static void signal_fifo_waiters(void) ++{ ++ if (atomic_read(&rfbi.cmd_fifo_full) > 0) { ++ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ ++ complete(&rfbi.cmd_done); ++ atomic_dec(&rfbi.cmd_fifo_full); ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int do_update(struct omap_dss_device *dssdev, struct update_region *upd) ++{ ++ u16 x = upd->x; ++ u16 y = upd->y; ++ u16 w = upd->w; ++ u16 h = upd->h; ++ ++ perf_mark_setup(); ++ ++ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ /*dssdev->driver->enable_te(dssdev, 1); */ ++ dss_setup_partial_planes(dssdev, &x, &y, &w, &h); ++ } ++ ++#ifdef MEASURE_PERF ++ rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ ++#endif ++ ++ dssdev->driver->setup_update(dssdev, x, y, w, h); ++ ++ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ rfbi_transfer_area(w, h, NULL, NULL); ++ return 1; ++ } else { ++ struct omap_overlay *ovl; ++ void __iomem *addr; ++ int scr_width; ++ ++ ovl = dssdev->manager->overlays[0]; ++ scr_width = ovl->info.screen_width; ++ addr = ovl->info.vaddr; ++ ++ omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); ++ ++ perf_show("L4"); ++ ++ return 0; ++ } ++} ++ ++static void process_cmd_fifo(void) ++{ ++ int len; ++ struct update_param p; ++ struct omap_dss_device *dssdev; ++ unsigned long flags; ++ ++ if (atomic_inc_return(&rfbi.cmd_pending) != 1) ++ return; ++ ++ while (true) { ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ ++ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, ++ sizeof(struct update_param)); ++ if (len == 0) { ++ DSSDBG("nothing more in fifo\n"); ++ atomic_set(&rfbi.cmd_pending, 0); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ break; ++ } ++ ++ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(len != sizeof(struct update_param)); ++ BUG_ON(p.rfbi_module > 1); ++ ++ dssdev = rfbi.dssdev[p.rfbi_module]; ++ ++ if (p.cmd == RFBI_CMD_UPDATE) { ++ if (do_update(dssdev, &p.par.r)) ++ break; /* async op */ ++ } else if (p.cmd == RFBI_CMD_SYNC) { ++ DSSDBG("Signaling SYNC done!\n"); ++ complete(p.par.sync); ++ } else ++ BUG(); ++ } ++ ++ signal_fifo_waiters(); ++} ++ ++static void rfbi_push_cmd(struct update_param *p) ++{ ++ int ret; ++ ++ while (1) { ++ unsigned long flags; ++ int available; ++ ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ available = RFBI_CMD_FIFO_LEN_BYTES - ++ __kfifo_len(rfbi.cmd_fifo); ++ ++/* DSSDBG("%d bytes left in fifo\n", available); */ ++ if (available < sizeof(struct update_param)) { ++ DSSDBG("Going to wait because FIFO FULL..\n"); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ atomic_inc(&rfbi.cmd_fifo_full); ++ wait_for_completion(&rfbi.cmd_done); ++ /*DSSDBG("Woke up because fifo not full anymore\n");*/ ++ continue; ++ } ++ ++ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, ++ sizeof(struct update_param)); ++/* DSSDBG("pushed %d bytes\n", ret);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(ret != sizeof(struct update_param)); ++ ++ break; ++ } ++} ++ ++static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_UPDATE; ++ ++ p.par.r.x = x; ++ p.par.r.y = y; ++ p.par.r.w = w; ++ p.par.r.h = h; ++ ++ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); ++ ++ rfbi_push_cmd(&p); ++ ++ process_cmd_fifo(); ++} ++ ++static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_SYNC; ++ p.par.sync = sync_comp; ++ ++ rfbi_push_cmd(&p); ++ ++ DSSDBG("RFBI sync pushed to cmd fifo\n"); ++ ++ process_cmd_fifo(); ++} ++ ++void rfbi_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(RFBI_REVISION); ++ DUMPREG(RFBI_SYSCONFIG); ++ DUMPREG(RFBI_SYSSTATUS); ++ DUMPREG(RFBI_CONTROL); ++ DUMPREG(RFBI_PIXEL_CNT); ++ DUMPREG(RFBI_LINE_NUMBER); ++ DUMPREG(RFBI_CMD); ++ DUMPREG(RFBI_PARAM); ++ DUMPREG(RFBI_DATA); ++ DUMPREG(RFBI_READ); ++ DUMPREG(RFBI_STATUS); ++ ++ DUMPREG(RFBI_CONFIG(0)); ++ DUMPREG(RFBI_ONOFF_TIME(0)); ++ DUMPREG(RFBI_CYCLE_TIME(0)); ++ DUMPREG(RFBI_DATA_CYCLE1(0)); ++ DUMPREG(RFBI_DATA_CYCLE2(0)); ++ DUMPREG(RFBI_DATA_CYCLE3(0)); ++ ++ DUMPREG(RFBI_CONFIG(1)); ++ DUMPREG(RFBI_ONOFF_TIME(1)); ++ DUMPREG(RFBI_CYCLE_TIME(1)); ++ DUMPREG(RFBI_DATA_CYCLE1(1)); ++ DUMPREG(RFBI_DATA_CYCLE2(1)); ++ DUMPREG(RFBI_DATA_CYCLE3(1)); ++ ++ DUMPREG(RFBI_VSYNC_WIDTH); ++ DUMPREG(RFBI_HSYNC_WIDTH); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++int rfbi_init(void) ++{ ++ u32 rev; ++ u32 l; ++ ++ spin_lock_init(&rfbi.cmd_lock); ++ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, ++ &rfbi.cmd_lock); ++ if (IS_ERR(rfbi.cmd_fifo)) ++ return -ENOMEM; ++ ++ init_completion(&rfbi.cmd_done); ++ atomic_set(&rfbi.cmd_fifo_full, 0); ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ rfbi.base = ioremap(RFBI_BASE, SZ_256); ++ if (!rfbi.base) { ++ DSSERR("can't ioremap RFBI\n"); ++ return -ENOMEM; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ msleep(10); ++ ++ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; ++ ++ /* Enable autoidle and smart-idle */ ++ l = rfbi_read_reg(RFBI_SYSCONFIG); ++ l |= (1 << 0) | (2 << 3); ++ rfbi_write_reg(RFBI_SYSCONFIG, l); ++ ++ rev = rfbi_read_reg(RFBI_REVISION); ++ printk(KERN_INFO "OMAP RFBI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++ ++void rfbi_exit(void) ++{ ++ DSSDBG("rfbi_exit\n"); ++ ++ kfifo_free(rfbi.cmd_fifo); ++ ++ iounmap(rfbi.base); ++} ++ ++/* struct omap_display support */ ++static int rfbi_display_update(struct omap_dss_device *dssdev, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int rfbi_module; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ rfbi_module = rfbi_find_display(dssdev); ++ ++ rfbi_push_update(rfbi_module, x, y, w, h); ++ ++ return 0; ++} ++ ++static int rfbi_display_sync(struct omap_dss_device *dssdev) ++{ ++ struct completion sync_comp; ++ int rfbi_module; ++ ++ rfbi_module = rfbi_find_display(dssdev); ++ ++ init_completion(&sync_comp); ++ rfbi_push_sync(rfbi_module, &sync_comp); ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait_for_completion(&sync_comp); ++ DSSDBG("Released from SYNC\n"); ++ return 0; ++} ++ ++static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable) ++{ ++ dssdev->driver->enable_te(dssdev, enable); ++ return 0; ++} ++ ++static int rfbi_display_enable(struct omap_dss_device *dssdev) ++{ ++ int r; ++ ++ r = omap_dss_start_device(dssdev); ++ if (r) { ++ DSSERR("failed to start device\n"); ++ goto err0; ++ } ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ goto err1; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); ++ ++ dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); ++ ++ rfbi_configure(dssdev->phy.rfbi.channel, ++ dssdev->ctrl.pixel_size, ++ dssdev->phy.rfbi.data_lines); ++ ++ rfbi_set_timings(dssdev->phy.rfbi.channel, ++ &dssdev->ctrl.rfbi_timings); ++ ++ ++ if (dssdev->driver->enable) { ++ r = dssdev->driver->enable(dssdev); ++ if (r) ++ goto err2; ++ } ++ ++ return 0; ++err2: ++ omap_dispc_unregister_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++err1: ++ omap_dss_stop_device(dssdev); ++err0: ++ return r; ++} ++ ++static void rfbi_display_disable(struct omap_dss_device *dssdev) ++{ ++ dssdev->driver->disable(dssdev); ++ omap_dispc_unregister_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ omap_dss_stop_device(dssdev); ++} ++ ++int rfbi_init_display(struct omap_dss_device *dssdev) ++{ ++ dssdev->enable = rfbi_display_enable; ++ dssdev->disable = rfbi_display_disable; ++ dssdev->update = rfbi_display_update; ++ dssdev->sync = rfbi_display_sync; ++ dssdev->enable_te = rfbi_display_enable_te; ++ ++ rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; ++ ++ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++ ++ return 0; ++} +diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c +new file mode 100644 +index 0000000..a9c727e +--- /dev/null ++++ b/drivers/video/omap2/dss/sdi.c +@@ -0,0 +1,261 @@ ++/* ++ * linux/drivers/video/omap2/dss/sdi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "SDI" ++ ++#include <linux/kernel.h> ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/err.h> ++ ++#include <mach/board.h> ++#include <mach/display.h> ++#include "dss.h" ++ ++static struct { ++ bool skip_init; ++ bool update_enabled; ++} sdi; ++ ++static void sdi_basic_init(void) ++{ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ dispc_set_tft_data_lines(24); ++ dispc_lcd_enable_signal_polarity(1); ++} ++ ++static int sdi_display_enable(struct omap_dss_device *dssdev) ++{ ++ struct omap_video_timings *t = &dssdev->panel.timings; ++ struct dispc_clock_info cinfo; ++ u16 lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ int r; ++ ++ r = omap_dss_start_device(dssdev); ++ if (r) { ++ DSSERR("failed to start device\n"); ++ goto err0; ++ } ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("dssdev already enabled\n"); ++ r = -EINVAL; ++ goto err1; ++ } ++ ++ /* In case of skip_init sdi_init has already enabled the clocks */ ++ if (!sdi.skip_init) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ sdi_basic_init(); ++ ++ /* 15.5.9.1.2 */ ++ dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; ++ ++ dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, ++ dssdev->panel.acb); ++ ++ if (!sdi.skip_init) ++ r = dispc_calc_clock_div(1, t->pixel_clock * 1000, ++ &cinfo); ++ else ++ r = dispc_get_clock_div(&cinfo); ++ ++ if (r) ++ goto err2; ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != t->pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. Requested %d kHz, " ++ "got %lu kHz\n", ++ t->pixel_clock, pck); ++ ++ t->pixel_clock = pck; ++ } ++ ++ ++ dispc_set_lcd_timings(t); ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) ++ goto err2; ++ ++ if (!sdi.skip_init) { ++ dss_sdi_init(dssdev->phy.sdi.datapairs); ++ dss_sdi_enable(); ++ mdelay(2); ++ } ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dssdev->driver->enable) { ++ r = dssdev->driver->enable(dssdev); ++ if (r) ++ goto err3; ++ } ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ sdi.skip_init = 0; ++ ++ return 0; ++err3: ++ dispc_enable_lcd_out(0); ++err2: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++err1: ++ omap_dss_stop_device(dssdev); ++err0: ++ return r; ++} ++ ++static int sdi_display_resume(struct omap_dss_device *dssdev); ++ ++static void sdi_display_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ sdi_display_resume(dssdev); ++ ++ if (dssdev->driver->disable) ++ dssdev->driver->disable(dssdev); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_sdi_disable(); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ omap_dss_stop_device(dssdev); ++} ++ ++static int sdi_display_suspend(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (dssdev->driver->suspend) ++ dssdev->driver->suspend(dssdev); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_sdi_disable(); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int sdi_display_resume(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dss_sdi_enable(); ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dssdev->driver->resume) ++ dssdev->driver->resume(dssdev); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static int sdi_display_set_update_mode(struct omap_dss_device *dssdev, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ sdi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ sdi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode sdi_display_get_update_mode( ++ struct omap_dss_device *dssdev) ++{ ++ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++static void sdi_get_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ *timings = dssdev->panel.timings; ++} ++ ++int sdi_init_display(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("SDI init\n"); ++ ++ dssdev->enable = sdi_display_enable; ++ dssdev->disable = sdi_display_disable; ++ dssdev->suspend = sdi_display_suspend; ++ dssdev->resume = sdi_display_resume; ++ dssdev->set_update_mode = sdi_display_set_update_mode; ++ dssdev->get_update_mode = sdi_display_get_update_mode; ++ dssdev->get_timings = sdi_get_timings; ++ ++ return 0; ++} ++ ++int sdi_init(bool skip_init) ++{ ++ /* we store this for first display enable, then clear it */ ++ sdi.skip_init = skip_init; ++ ++ /* ++ * Enable clocks already here, otherwise there would be a toggle ++ * of them until sdi_display_enable is called. ++ */ ++ if (skip_init) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return 0; ++} ++ ++void sdi_exit(void) ++{ ++} +diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c +new file mode 100644 +index 0000000..cf7827e +--- /dev/null ++++ b/drivers/video/omap2/dss/venc.c +@@ -0,0 +1,797 @@ ++/* ++ * linux/drivers/video/omap2/dss/venc.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * VENC settings from TI's DSS driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#define DSS_SUBSYS_NAME "VENC" ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/io.h> ++#include <linux/mutex.h> ++#include <linux/completion.h> ++#include <linux/delay.h> ++#include <linux/string.h> ++#include <linux/seq_file.h> ++#include <linux/platform_device.h> ++#include <linux/regulator/consumer.h> ++ ++#include <mach/display.h> ++#include <mach/cpu.h> ++ ++#include "dss.h" ++ ++#define VENC_BASE 0x48050C00 ++ ++/* Venc registers */ ++#define VENC_REV_ID 0x00 ++#define VENC_STATUS 0x04 ++#define VENC_F_CONTROL 0x08 ++#define VENC_VIDOUT_CTRL 0x10 ++#define VENC_SYNC_CTRL 0x14 ++#define VENC_LLEN 0x1C ++#define VENC_FLENS 0x20 ++#define VENC_HFLTR_CTRL 0x24 ++#define VENC_CC_CARR_WSS_CARR 0x28 ++#define VENC_C_PHASE 0x2C ++#define VENC_GAIN_U 0x30 ++#define VENC_GAIN_V 0x34 ++#define VENC_GAIN_Y 0x38 ++#define VENC_BLACK_LEVEL 0x3C ++#define VENC_BLANK_LEVEL 0x40 ++#define VENC_X_COLOR 0x44 ++#define VENC_M_CONTROL 0x48 ++#define VENC_BSTAMP_WSS_DATA 0x4C ++#define VENC_S_CARR 0x50 ++#define VENC_LINE21 0x54 ++#define VENC_LN_SEL 0x58 ++#define VENC_L21__WC_CTL 0x5C ++#define VENC_HTRIGGER_VTRIGGER 0x60 ++#define VENC_SAVID__EAVID 0x64 ++#define VENC_FLEN__FAL 0x68 ++#define VENC_LAL__PHASE_RESET 0x6C ++#define VENC_HS_INT_START_STOP_X 0x70 ++#define VENC_HS_EXT_START_STOP_X 0x74 ++#define VENC_VS_INT_START_X 0x78 ++#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C ++#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 ++#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 ++#define VENC_VS_EXT_STOP_Y 0x88 ++#define VENC_AVID_START_STOP_X 0x90 ++#define VENC_AVID_START_STOP_Y 0x94 ++#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 ++#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 ++#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 ++#define VENC_TVDETGP_INT_START_STOP_X 0xB0 ++#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 ++#define VENC_GEN_CTRL 0xB8 ++#define VENC_OUTPUT_CONTROL 0xC4 ++#define VENC_OUTPUT_TEST 0xC8 ++#define VENC_DAC_B__DAC_C 0xC8 ++ ++struct venc_config { ++ u32 f_control; ++ u32 vidout_ctrl; ++ u32 sync_ctrl; ++ u32 llen; ++ u32 flens; ++ u32 hfltr_ctrl; ++ u32 cc_carr_wss_carr; ++ u32 c_phase; ++ u32 gain_u; ++ u32 gain_v; ++ u32 gain_y; ++ u32 black_level; ++ u32 blank_level; ++ u32 x_color; ++ u32 m_control; ++ u32 bstamp_wss_data; ++ u32 s_carr; ++ u32 line21; ++ u32 ln_sel; ++ u32 l21__wc_ctl; ++ u32 htrigger_vtrigger; ++ u32 savid__eavid; ++ u32 flen__fal; ++ u32 lal__phase_reset; ++ u32 hs_int_start_stop_x; ++ u32 hs_ext_start_stop_x; ++ u32 vs_int_start_x; ++ u32 vs_int_stop_x__vs_int_start_y; ++ u32 vs_int_stop_y__vs_ext_start_x; ++ u32 vs_ext_stop_x__vs_ext_start_y; ++ u32 vs_ext_stop_y; ++ u32 avid_start_stop_x; ++ u32 avid_start_stop_y; ++ u32 fid_int_start_x__fid_int_start_y; ++ u32 fid_int_offset_y__fid_ext_start_x; ++ u32 fid_ext_start_y__fid_ext_offset_y; ++ u32 tvdetgp_int_start_stop_x; ++ u32 tvdetgp_int_start_stop_y; ++ u32 gen_ctrl; ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_pal_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x40, ++ .llen = 0x35F, /* 863 */ ++ .flens = 0x270, /* 624 */ ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x2F7225ED, ++ .c_phase = 0, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3B, ++ .blank_level = 0x3B, ++ .x_color = 0x7, ++ .m_control = 0x2, ++ .bstamp_wss_data = 0x3F, ++ .s_carr = 0x2A098ACB, ++ .line21 = 0, ++ .ln_sel = 0x01290015, ++ .l21__wc_ctl = 0x0000F603, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 0x00180270, ++ .lal__phase_reset = 0x00040135, ++ .hs_int_start_stop_x = 0x00880358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x01A70000, ++ .vs_int_stop_x__vs_int_start_y = 0x000001A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, ++ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, ++ .vs_ext_stop_y = 0x00000025, ++ .avid_start_stop_x = 0x03530083, ++ .avid_start_stop_y = 0x026C002E, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380001, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FF0000, ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_ntsc_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x8040, ++ .llen = 0x359, ++ .flens = 0x20C, ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x043F2631, ++ .c_phase = 0, ++ .gain_u = 0x102, ++ .gain_v = 0x16C, ++ .gain_y = 0x12F, ++ .black_level = 0x43, ++ .blank_level = 0x38, ++ .x_color = 0x7, ++ .m_control = 0x1, ++ .bstamp_wss_data = 0x38, ++ .s_carr = 0x21F07C1F, ++ .line21 = 0, ++ .ln_sel = 0x01310011, ++ .l21__wc_ctl = 0x0000F003, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x069300F4, ++ .flen__fal = 0x0016020C, ++ .lal__phase_reset = 0x00060107, ++ .hs_int_start_stop_x = 0x008E0350, ++ .hs_ext_start_stop_x = 0x000F0359, ++ .vs_int_start_x = 0x01A00000, ++ .vs_int_stop_x__vs_int_start_y = 0x020701A0, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, ++ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, ++ .vs_ext_stop_y = 0x00000006, ++ .avid_start_stop_x = 0x03480078, ++ .avid_start_stop_y = 0x02060024, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01060006, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00F90000, ++}; ++ ++static const struct venc_config venc_config_pal_bdghi = { ++ .f_control = 0, ++ .vidout_ctrl = 0, ++ .sync_ctrl = 0, ++ .hfltr_ctrl = 0, ++ .x_color = 0, ++ .line21 = 0, ++ .ln_sel = 21, ++ .htrigger_vtrigger = 0, ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FB0000, ++ ++ .llen = 864-1, ++ .flens = 625-1, ++ .cc_carr_wss_carr = 0x2F7625ED, ++ .c_phase = 0xDF, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3e, ++ .blank_level = 0x3e, ++ .m_control = 0<<2 | 1<<1, ++ .bstamp_wss_data = 0x42, ++ .s_carr = 0x2a098acb, ++ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 23<<16 | 624<<0, ++ .lal__phase_reset = 2<<17 | 310<<0, ++ .hs_int_start_stop_x = 0x00920358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x1a7<<16, ++ .vs_int_stop_x__vs_int_start_y = 0x000601A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, ++ .vs_ext_stop_x__vs_ext_start_y = 0x27101af, ++ .vs_ext_stop_y = 0x05, ++ .avid_start_stop_x = 0x03530082, ++ .avid_start_stop_y = 0x0270002E, ++ .fid_int_start_x__fid_int_start_y = 0x0005008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380005, ++}; ++ ++const struct omap_video_timings omap_dss_pal_timings = { ++ .x_res = 720, ++ .y_res = 574, ++ .pixel_clock = 13500, ++ .hsw = 64, ++ .hfp = 12, ++ .hbp = 68, ++ .vsw = 5, ++ .vfp = 5, ++ .vbp = 41, ++}; ++EXPORT_SYMBOL(omap_dss_pal_timings); ++ ++const struct omap_video_timings omap_dss_ntsc_timings = { ++ .x_res = 720, ++ .y_res = 482, ++ .pixel_clock = 13500, ++ .hsw = 64, ++ .hfp = 16, ++ .hbp = 58, ++ .vsw = 6, ++ .vfp = 6, ++ .vbp = 31, ++}; ++EXPORT_SYMBOL(omap_dss_ntsc_timings); ++ ++static struct { ++ void __iomem *base; ++ struct mutex venc_lock; ++ u32 wss_data; ++ struct regulator *vdda_dac_reg; ++} venc; ++ ++static inline void venc_write_reg(int idx, u32 val) ++{ ++ __raw_writel(val, venc.base + idx); ++} ++ ++static inline u32 venc_read_reg(int idx) ++{ ++ u32 l = __raw_readl(venc.base + idx); ++ return l; ++} ++ ++static void venc_write_config(const struct venc_config *config) ++{ ++ DSSDBG("write venc conf\n"); ++ ++ venc_write_reg(VENC_LLEN, config->llen); ++ venc_write_reg(VENC_FLENS, config->flens); ++ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); ++ venc_write_reg(VENC_C_PHASE, config->c_phase); ++ venc_write_reg(VENC_GAIN_U, config->gain_u); ++ venc_write_reg(VENC_GAIN_V, config->gain_v); ++ venc_write_reg(VENC_GAIN_Y, config->gain_y); ++ venc_write_reg(VENC_BLACK_LEVEL, config->black_level); ++ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); ++ venc_write_reg(VENC_M_CONTROL, config->m_control); ++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | ++ venc.wss_data); ++ venc_write_reg(VENC_S_CARR, config->s_carr); ++ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); ++ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); ++ venc_write_reg(VENC_FLEN__FAL, config->flen__fal); ++ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); ++ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); ++ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); ++ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); ++ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, ++ config->vs_int_stop_x__vs_int_start_y); ++ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, ++ config->vs_int_stop_y__vs_ext_start_x); ++ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, ++ config->vs_ext_stop_x__vs_ext_start_y); ++ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); ++ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); ++ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); ++ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, ++ config->fid_int_start_x__fid_int_start_y); ++ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, ++ config->fid_int_offset_y__fid_ext_start_x); ++ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, ++ config->fid_ext_start_y__fid_ext_offset_y); ++ ++ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); ++ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); ++ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); ++ venc_write_reg(VENC_X_COLOR, config->x_color); ++ venc_write_reg(VENC_LINE21, config->line21); ++ venc_write_reg(VENC_LN_SEL, config->ln_sel); ++ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, ++ config->tvdetgp_int_start_stop_x); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, ++ config->tvdetgp_int_start_stop_y); ++ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); ++ venc_write_reg(VENC_F_CONTROL, config->f_control); ++ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); ++} ++ ++static void venc_reset(void) ++{ ++ int t = 1000; ++ ++ venc_write_reg(VENC_F_CONTROL, 1<<8); ++ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { ++ if (--t == 0) { ++ DSSERR("Failed to reset venc\n"); ++ return; ++ } ++ } ++ ++ /* the magical sleep that makes things work */ ++ msleep(20); ++} ++ ++static void venc_enable_clocks(int enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++} ++ ++static const struct venc_config *venc_timings_to_config( ++ struct omap_video_timings *timings) ++{ ++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) ++ return &venc_config_pal_trm; ++ ++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) ++ return &venc_config_ntsc_trm; ++ ++ BUG(); ++} ++ ++ ++ ++ ++ ++/* driver */ ++static int venc_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.timings = omap_dss_pal_timings; ++ ++ return 0; ++} ++ ++static void venc_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int venc_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void venc_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ ++ msleep(100); ++} ++ ++static int venc_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ venc_panel_disable(dssdev); ++ return 0; ++} ++ ++static int venc_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return venc_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver venc_driver = { ++ .probe = venc_panel_probe, ++ .remove = venc_panel_remove, ++ ++ .enable = venc_panel_enable, ++ .disable = venc_panel_disable, ++ .suspend = venc_panel_suspend, ++ .resume = venc_panel_resume, ++ ++ .driver = { ++ .name = "venc", ++ .owner = THIS_MODULE, ++ }, ++}; ++/* driver end */ ++ ++ ++ ++int venc_init(struct platform_device *pdev) ++{ ++ u8 rev_id; ++ ++ mutex_init(&venc.venc_lock); ++ ++ venc.wss_data = 0; ++ ++ venc.base = ioremap(VENC_BASE, SZ_1K); ++ if (!venc.base) { ++ DSSERR("can't ioremap VENC\n"); ++ return -ENOMEM; ++ } ++ ++ venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac"); ++ if (IS_ERR(venc.vdda_dac_reg)) { ++ iounmap(venc.base); ++ DSSERR("can't get VDDA_DAC regulator\n"); ++ return PTR_ERR(venc.vdda_dac_reg); ++ } ++ ++ venc_enable_clocks(1); ++ ++ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); ++ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); ++ ++ venc_enable_clocks(0); ++ ++ return omap_dss_register_driver(&venc_driver); ++} ++ ++void venc_exit(void) ++{ ++ omap_dss_unregister_driver(&venc_driver); ++ ++ regulator_put(venc.vdda_dac_reg); ++ ++ iounmap(venc.base); ++} ++ ++static void venc_power_on(struct omap_dss_device *dssdev) ++{ ++ u32 l; ++ ++ venc_enable_clocks(1); ++ ++ venc_reset(); ++ venc_write_config(venc_timings_to_config(&dssdev->panel.timings)); ++ ++ dss_set_venc_output(dssdev->phy.venc.type); ++ dss_set_dac_pwrdn_bgz(1); ++ ++ l = 0; ++ ++ if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) ++ l |= 1 << 1; ++ else /* S-Video */ ++ l |= (1 << 0) | (1 << 2); ++ ++ if (dssdev->phy.venc.invert_polarity == false) ++ l |= 1 << 3; ++ ++ venc_write_reg(VENC_OUTPUT_CONTROL, l); ++ ++ dispc_set_digit_size(dssdev->panel.timings.x_res, ++ dssdev->panel.timings.y_res/2); ++ ++ regulator_enable(venc.vdda_dac_reg); ++ ++ if (dssdev->platform_enable) ++ dssdev->platform_enable(dssdev); ++ ++ dispc_enable_digit_out(1); ++} ++ ++static void venc_power_off(struct omap_dss_device *dssdev) ++{ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0); ++ dss_set_dac_pwrdn_bgz(0); ++ ++ dispc_enable_digit_out(0); ++ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++ ++ regulator_disable(venc.vdda_dac_reg); ++ ++ venc_enable_clocks(0); ++} ++ ++static int venc_enable_display(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_enable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_on(dssdev); ++ ++ venc.wss_data = 0; ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static void venc_disable_display(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("venc_disable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) ++ goto end; ++ ++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) { ++ /* suspended is the same as disabled with venc */ ++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED; ++ goto end; ++ } ++ ++ venc_power_off(dssdev); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED; ++end: ++ mutex_unlock(&venc.venc_lock); ++} ++ ++static int venc_display_suspend(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_display_suspend\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_off(dssdev); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static int venc_display_resume(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_display_resume\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_on(dssdev); ++ ++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static void venc_get_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ *timings = dssdev->panel.timings; ++} ++ ++static void venc_set_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("venc_set_timings\n"); ++ ++ /* Reset WSS data when the TV standard changes. */ ++ if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings))) ++ venc.wss_data = 0; ++ ++ dssdev->panel.timings = *timings; ++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { ++ /* turn the venc off and on to get new timings to use */ ++ venc_disable_display(dssdev); ++ venc_enable_display(dssdev); ++ } ++} ++ ++static int venc_check_timings(struct omap_dss_device *dssdev, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("venc_check_timings\n"); ++ ++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) ++ return 0; ++ ++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) ++ return 0; ++ ++ return -EINVAL; ++} ++ ++static u32 venc_get_wss(struct omap_dss_device *dssdev) ++{ ++ /* Invert due to VENC_L21_WC_CTL:INV=1 */ ++ return (venc.wss_data >> 8) ^ 0xfffff; ++} ++ ++static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss) ++{ ++ const struct venc_config *config; ++ ++ DSSDBG("venc_set_wss\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ config = venc_timings_to_config(&dssdev->panel.timings); ++ ++ /* Invert due to VENC_L21_WC_CTL:INV=1 */ ++ venc.wss_data = (wss ^ 0xfffff) << 8; ++ ++ venc_enable_clocks(1); ++ ++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | ++ venc.wss_data); ++ ++ venc_enable_clocks(0); ++ ++ mutex_unlock(&venc.venc_lock); ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode venc_display_get_update_mode( ++ struct omap_dss_device *dssdev) ++{ ++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) ++ return OMAP_DSS_UPDATE_AUTO; ++ else ++ return OMAP_DSS_UPDATE_DISABLED; ++} ++ ++int venc_init_display(struct omap_dss_device *dssdev) ++{ ++ DSSDBG("init_display\n"); ++ ++ dssdev->enable = venc_enable_display; ++ dssdev->disable = venc_disable_display; ++ dssdev->suspend = venc_display_suspend; ++ dssdev->resume = venc_display_resume; ++ dssdev->get_timings = venc_get_timings; ++ dssdev->set_timings = venc_set_timings; ++ dssdev->check_timings = venc_check_timings; ++ dssdev->get_wss = venc_get_wss; ++ dssdev->set_wss = venc_set_wss; ++ dssdev->get_update_mode = venc_display_get_update_mode; ++ ++ return 0; ++} ++ ++void venc_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r)) ++ ++ venc_enable_clocks(1); ++ ++ DUMPREG(VENC_F_CONTROL); ++ DUMPREG(VENC_VIDOUT_CTRL); ++ DUMPREG(VENC_SYNC_CTRL); ++ DUMPREG(VENC_LLEN); ++ DUMPREG(VENC_FLENS); ++ DUMPREG(VENC_HFLTR_CTRL); ++ DUMPREG(VENC_CC_CARR_WSS_CARR); ++ DUMPREG(VENC_C_PHASE); ++ DUMPREG(VENC_GAIN_U); ++ DUMPREG(VENC_GAIN_V); ++ DUMPREG(VENC_GAIN_Y); ++ DUMPREG(VENC_BLACK_LEVEL); ++ DUMPREG(VENC_BLANK_LEVEL); ++ DUMPREG(VENC_X_COLOR); ++ DUMPREG(VENC_M_CONTROL); ++ DUMPREG(VENC_BSTAMP_WSS_DATA); ++ DUMPREG(VENC_S_CARR); ++ DUMPREG(VENC_LINE21); ++ DUMPREG(VENC_LN_SEL); ++ DUMPREG(VENC_L21__WC_CTL); ++ DUMPREG(VENC_HTRIGGER_VTRIGGER); ++ DUMPREG(VENC_SAVID__EAVID); ++ DUMPREG(VENC_FLEN__FAL); ++ DUMPREG(VENC_LAL__PHASE_RESET); ++ DUMPREG(VENC_HS_INT_START_STOP_X); ++ DUMPREG(VENC_HS_EXT_START_STOP_X); ++ DUMPREG(VENC_VS_INT_START_X); ++ DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y); ++ DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X); ++ DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y); ++ DUMPREG(VENC_VS_EXT_STOP_Y); ++ DUMPREG(VENC_AVID_START_STOP_X); ++ DUMPREG(VENC_AVID_START_STOP_Y); ++ DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y); ++ DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X); ++ DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y); ++ DUMPREG(VENC_TVDETGP_INT_START_STOP_X); ++ DUMPREG(VENC_TVDETGP_INT_START_STOP_Y); ++ DUMPREG(VENC_GEN_CTRL); ++ DUMPREG(VENC_OUTPUT_CONTROL); ++ DUMPREG(VENC_OUTPUT_TEST); ++ ++ venc_enable_clocks(0); ++ ++#undef DUMPREG ++} +diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig +new file mode 100644 +index 0000000..bb694cc +--- /dev/null ++++ b/drivers/video/omap2/omapfb/Kconfig +@@ -0,0 +1,37 @@ ++menuconfig FB_OMAP2 ++ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" ++ depends on FB && OMAP2_DSS ++ ++ select OMAP2_VRAM ++ select OMAP2_VRFB ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Frame buffer driver for OMAP2/3 based boards. ++ ++config FB_OMAP2_DEBUG_SUPPORT ++ bool "Debug support for OMAP2/3 FB" ++ default y ++ depends on FB_OMAP2 ++ help ++ Support for debug output. You have to enable the actual printing ++ with debug module parameter. ++ ++config FB_OMAP2_FORCE_AUTO_UPDATE ++ bool "Force main display to automatic update mode" ++ depends on FB_OMAP2 ++ help ++ Forces main display to automatic update mode (if possible), ++ and also enables tearsync (if possible). By default ++ displays that support manual update are started in manual ++ update mode. ++ ++config FB_OMAP2_NUM_FBS ++ int "Number of framebuffers" ++ range 1 10 ++ default 3 ++ depends on FB_OMAP2 ++ help ++ Select the number of framebuffers created. OMAP2/3 has 3 overlays ++ so normally this would be 3. +diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile +new file mode 100644 +index 0000000..51c2e00 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_FB_OMAP2) += omapfb.o ++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o +diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c +new file mode 100644 +index 0000000..70fb64e +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c +@@ -0,0 +1,727 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-ioctl.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/fb.h> ++#include <linux/device.h> ++#include <linux/uaccess.h> ++#include <linux/platform_device.h> ++#include <linux/mm.h> ++#include <linux/omapfb.h> ++#include <linux/vmalloc.h> ++ ++#include <mach/display.h> ++#include <mach/vrfb.h> ++#include <mach/vram.h> ++ ++#include "omapfb.h" ++ ++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_dss_device *display = fb2display(fbi); ++ struct omap_overlay *ovl; ++ struct omap_overlay_info info; ++ int r = 0; ++ ++ DBG("omapfb_setup_plane\n"); ++ ++ if (ofbi->num_overlays != 1) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ /* XXX uses only the first overlay */ ++ ovl = ofbi->overlays[0]; ++ ++ if (pi->enabled && !ofbi->region.size) { ++ /* ++ * This plane's memory was freed, can't enable it ++ * until it's reallocated. ++ */ ++ r = -EINVAL; ++ goto out; ++ } ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.pos_x = pi->pos_x; ++ info.pos_y = pi->pos_y; ++ info.out_width = pi->out_width; ++ info.out_height = pi->out_height; ++ info.enabled = pi->enabled; ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ goto out; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ goto out; ++ } ++ ++ if (display) { ++ u16 w, h; ++ ++ if (display->sync) ++ display->sync(display); ++ ++ display->get_resolution(display, &w, &h); ++ ++ if (display->update) ++ display->update(display, 0, 0, w, h); ++ } ++ ++out: ++ if (r) ++ dev_err(fbdev->dev, "setup_plane failed\n"); ++ return r; ++} ++ ++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ if (ofbi->num_overlays != 1) { ++ memset(pi, 0, sizeof(*pi)); ++ } else { ++ struct omap_overlay_info *ovli; ++ struct omap_overlay *ovl; ++ ++ ovl = ofbi->overlays[0]; ++ ovli = &ovl->info; ++ ++ pi->pos_x = ovli->pos_x; ++ pi->pos_y = ovli->pos_y; ++ pi->enabled = ovli->enabled; ++ pi->channel_out = 0; /* xxx */ ++ pi->mirror = 0; ++ pi->out_width = ovli->out_width; ++ pi->out_height = ovli->out_height; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ int r, i; ++ size_t size; ++ ++ if (mi->type > OMAPFB_MEMTYPE_MAX) ++ return -EINVAL; ++ ++ size = PAGE_ALIGN(mi->size); ++ ++ rg = &ofbi->region; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->info.enabled) ++ return -EBUSY; ++ } ++ ++ if (rg->size != size || rg->type != mi->type) { ++ r = omapfb_realloc_fbmem(fbi, size, mi->type); ++ if (r) { ++ dev_err(fbdev->dev, "realloc fbmem failed\n"); ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_mem_region *rg; ++ ++ rg = &ofbi->region; ++ memset(mi, 0, sizeof(*mi)); ++ ++ mi->size = rg->size; ++ mi->type = rg->type; ++ ++ return 0; ++} ++ ++static int omapfb_update_window(struct fb_info *fbi, ++ u32 x, u32 y, u32 w, u32 h) ++{ ++ struct omap_dss_device *display = fb2display(fbi); ++ u16 dw, dh; ++ ++ if (!display) ++ return 0; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ display->get_resolution(display, &dw, &dh); ++ ++ if (x + w > dw || y + h > dh) ++ return -EINVAL; ++ ++ display->update(display, x, y, w, h); ++ ++ return 0; ++} ++ ++static int omapfb_set_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode mode) ++{ ++ struct omap_dss_device *display = fb2display(fbi); ++ enum omap_dss_update_mode um; ++ int r; ++ ++ if (!display || !display->set_update_mode) ++ return -EINVAL; ++ ++ switch (mode) { ++ case OMAPFB_UPDATE_DISABLED: ++ um = OMAP_DSS_UPDATE_DISABLED; ++ break; ++ ++ case OMAPFB_AUTO_UPDATE: ++ um = OMAP_DSS_UPDATE_AUTO; ++ break; ++ ++ case OMAPFB_MANUAL_UPDATE: ++ um = OMAP_DSS_UPDATE_MANUAL; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ r = display->set_update_mode(display, um); ++ ++ return r; ++} ++ ++static int omapfb_get_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode *mode) ++{ ++ struct omap_dss_device *display = fb2display(fbi); ++ enum omap_dss_update_mode m; ++ ++ if (!display || !display->get_update_mode) ++ return -EINVAL; ++ ++ m = display->get_update_mode(display); ++ ++ switch (m) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ *mode = OMAPFB_UPDATE_DISABLED; ++ break; ++ case OMAP_DSS_UPDATE_AUTO: ++ *mode = OMAPFB_AUTO_UPDATE; ++ break; ++ case OMAP_DSS_UPDATE_MANUAL: ++ *mode = OMAPFB_MANUAL_UPDATE; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++/* XXX this color key handling is a hack... */ ++static struct omapfb_color_key omapfb_color_keys[2]; ++ ++static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, ++ struct omapfb_color_key *ck) ++{ ++ struct omap_overlay_manager_info info; ++ enum omap_dss_trans_key_type kt; ++ int r; ++ ++ mgr->get_manager_info(mgr, &info); ++ ++ if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) { ++ info.trans_enabled = false; ++ omapfb_color_keys[mgr->id] = *ck; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ ++ return r; ++ } ++ ++ switch (ck->key_type) { ++ case OMAPFB_COLOR_KEY_GFX_DST: ++ kt = OMAP_DSS_COLOR_KEY_GFX_DST; ++ break; ++ case OMAPFB_COLOR_KEY_VID_SRC: ++ kt = OMAP_DSS_COLOR_KEY_VID_SRC; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ info.default_color = ck->background; ++ info.trans_key = ck->trans_key; ++ info.trans_key_type = kt; ++ info.trans_enabled = true; ++ ++ omapfb_color_keys[mgr->id] = *ck; ++ ++ r = mgr->set_manager_info(mgr, &info); ++ if (r) ++ return r; ++ ++ r = mgr->apply(mgr); ++ ++ return r; ++} ++ ++static int omapfb_set_color_key(struct fb_info *fbi, ++ struct omapfb_color_key *ck) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int r; ++ int i; ++ struct omap_overlay_manager *mgr = NULL; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) { ++ mgr = ofbi->overlays[i]->manager; ++ break; ++ } ++ } ++ ++ if (!mgr) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ r = _omapfb_set_color_key(mgr, ck); ++err: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_get_color_key(struct fb_info *fbi, ++ struct omapfb_color_key *ck) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_overlay_manager *mgr = NULL; ++ int r = 0; ++ int i; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) { ++ mgr = ofbi->overlays[i]->manager; ++ break; ++ } ++ } ++ ++ if (!mgr) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ *ck = omapfb_color_keys[mgr->id]; ++err: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_memory_read(struct fb_info *fbi, ++ struct omapfb_memory_read *mr) ++{ ++ struct omap_dss_device *display = fb2display(fbi); ++ void *buf; ++ int r; ++ ++ if (!display || !display->memory_read) ++ return -ENOENT; ++ ++ if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size)) ++ return -EFAULT; ++ ++ if (mr->w * mr->h * 3 > mr->buffer_size) ++ return -EINVAL; ++ ++ buf = vmalloc(mr->buffer_size); ++ if (!buf) { ++ DBG("vmalloc failed\n"); ++ return -ENOMEM; ++ } ++ ++ r = display->memory_read(display, buf, mr->buffer_size, ++ mr->x, mr->y, mr->w, mr->h); ++ ++ if (r > 0) { ++ if (copy_to_user(mr->buffer, buf, mr->buffer_size)) ++ r = -EFAULT; ++ } ++ ++ vfree(buf); ++ ++ return r; ++} ++ ++static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev, ++ struct omapfb_ovl_colormode *mode) ++{ ++ int ovl_idx = mode->overlay_idx; ++ int mode_idx = mode->mode_idx; ++ struct omap_overlay *ovl; ++ enum omap_color_mode supported_modes; ++ struct fb_var_screeninfo var; ++ int i; ++ ++ if (ovl_idx >= fbdev->num_overlays) ++ return -ENODEV; ++ ovl = fbdev->overlays[ovl_idx]; ++ supported_modes = ovl->supported_modes; ++ ++ mode_idx = mode->mode_idx; ++ ++ for (i = 0; i < sizeof(supported_modes) * 8; i++) { ++ if (!(supported_modes & (1 << i))) ++ continue; ++ /* ++ * It's possible that the FB doesn't support a mode ++ * that is supported by the overlay, so call the ++ * following here. ++ */ ++ if (dss_mode_to_fb_mode(1 << i, &var) < 0) ++ continue; ++ ++ mode_idx--; ++ if (mode_idx < 0) ++ break; ++ } ++ ++ if (i == sizeof(supported_modes) * 8) ++ return -ENOENT; ++ ++ mode->bits_per_pixel = var.bits_per_pixel; ++ mode->nonstd = var.nonstd; ++ mode->red = var.red; ++ mode->green = var.green; ++ mode->blue = var.blue; ++ mode->transp = var.transp; ++ ++ return 0; ++} ++ ++static int omapfb_wait_for_go(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int r = 0; ++ int i; ++ ++ for (i = 0; i < ofbi->num_overlays; ++i) { ++ struct omap_overlay *ovl = ofbi->overlays[i]; ++ r = ovl->wait_for_go(ovl); ++ if (r) ++ break; ++ } ++ ++ return r; ++} ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_dss_device *display = fb2display(fbi); ++ ++ union { ++ struct omapfb_update_window_old uwnd_o; ++ struct omapfb_update_window uwnd; ++ struct omapfb_plane_info plane_info; ++ struct omapfb_caps caps; ++ struct omapfb_mem_info mem_info; ++ struct omapfb_color_key color_key; ++ struct omapfb_ovl_colormode ovl_colormode; ++ enum omapfb_update_mode update_mode; ++ int test_num; ++ struct omapfb_memory_read memory_read; ++ struct omapfb_vram_info vram_info; ++ } p; ++ ++ int r = 0; ++ ++ switch (cmd) { ++ case OMAPFB_SYNC_GFX: ++ DBG("ioctl SYNC_GFX\n"); ++ if (!display || !display->sync) { ++ /* DSS1 never returns an error here, so we neither */ ++ /*r = -EINVAL;*/ ++ break; ++ } ++ ++ r = display->sync(display); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW_OLD: ++ DBG("ioctl UPDATE_WINDOW_OLD\n"); ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd_o, ++ (void __user *)arg, ++ sizeof(p.uwnd_o))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y, ++ p.uwnd_o.width, p.uwnd_o.height); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW: ++ DBG("ioctl UPDATE_WINDOW\n"); ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd, (void __user *)arg, ++ sizeof(p.uwnd))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y, ++ p.uwnd.width, p.uwnd.height); ++ break; ++ ++ case OMAPFB_SETUP_PLANE: ++ DBG("ioctl SETUP_PLANE\n"); ++ if (copy_from_user(&p.plane_info, (void __user *)arg, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_plane(fbi, &p.plane_info); ++ break; ++ ++ case OMAPFB_QUERY_PLANE: ++ DBG("ioctl QUERY_PLANE\n"); ++ r = omapfb_query_plane(fbi, &p.plane_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.plane_info, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SETUP_MEM: ++ DBG("ioctl SETUP_MEM\n"); ++ if (copy_from_user(&p.mem_info, (void __user *)arg, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_mem(fbi, &p.mem_info); ++ break; ++ ++ case OMAPFB_QUERY_MEM: ++ DBG("ioctl QUERY_MEM\n"); ++ r = omapfb_query_mem(fbi, &p.mem_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.mem_info, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_GET_CAPS: ++ DBG("ioctl GET_CAPS\n"); ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ memset(&p.caps, 0, sizeof(p.caps)); ++ p.caps.ctrl = display->caps; ++ ++ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_GET_OVERLAY_COLORMODE: ++ DBG("ioctl GET_OVERLAY_COLORMODE\n"); ++ if (copy_from_user(&p.ovl_colormode, (void __user *)arg, ++ sizeof(p.ovl_colormode))) { ++ r = -EFAULT; ++ break; ++ } ++ r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.ovl_colormode, ++ sizeof(p.ovl_colormode))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_UPDATE_MODE: ++ DBG("ioctl SET_UPDATE_MODE\n"); ++ if (get_user(p.update_mode, (int __user *)arg)) ++ r = -EFAULT; ++ else ++ r = omapfb_set_update_mode(fbi, p.update_mode); ++ break; ++ ++ case OMAPFB_GET_UPDATE_MODE: ++ DBG("ioctl GET_UPDATE_MODE\n"); ++ r = omapfb_get_update_mode(fbi, &p.update_mode); ++ if (r) ++ break; ++ if (put_user(p.update_mode, ++ (enum omapfb_update_mode __user *)arg)) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_COLOR_KEY: ++ DBG("ioctl SET_COLOR_KEY\n"); ++ if (copy_from_user(&p.color_key, (void __user *)arg, ++ sizeof(p.color_key))) ++ r = -EFAULT; ++ else ++ r = omapfb_set_color_key(fbi, &p.color_key); ++ break; ++ ++ case OMAPFB_GET_COLOR_KEY: ++ DBG("ioctl GET_COLOR_KEY\n"); ++ r = omapfb_get_color_key(fbi, &p.color_key); ++ if (r) ++ break; ++ if (copy_to_user((void __user *)arg, &p.color_key, ++ sizeof(p.color_key))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_WAITFORVSYNC: ++ DBG("ioctl WAITFORVSYNC\n"); ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->wait_vsync(display); ++ break; ++ ++ case OMAPFB_WAITFORGO: ++ DBG("ioctl WAITFORGO\n"); ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = omapfb_wait_for_go(fbi); ++ break; ++ ++ /* LCD and CTRL tests do the same thing for backward ++ * compatibility */ ++ case OMAPFB_LCD_TEST: ++ DBG("ioctl LCD_TEST\n"); ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_CTRL_TEST: ++ DBG("ioctl CTRL_TEST\n"); ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_MEMORY_READ: ++ DBG("ioctl MEMORY_READ\n"); ++ ++ if (copy_from_user(&p.memory_read, (void __user *)arg, ++ sizeof(p.memory_read))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_memory_read(fbi, &p.memory_read); ++ ++ break; ++ ++ case OMAPFB_GET_VRAM_INFO: { ++ unsigned long vram, free, largest; ++ ++ DBG("ioctl GET_VRAM_INFO\n"); ++ ++ omap_vram_get_info(&vram, &free, &largest); ++ p.vram_info.total = vram; ++ p.vram_info.free = free; ++ p.vram_info.largest_free_block = largest; ++ ++ if (copy_to_user((void __user *)arg, &p.vram_info, ++ sizeof(p.vram_info))) ++ r = -EFAULT; ++ break; ++ } ++ ++ default: ++ dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd); ++ r = -EINVAL; ++ } ++ ++ if (r < 0) ++ DBG("ioctl failed: %d\n", r); ++ ++ return r; ++} ++ ++ +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +new file mode 100644 +index 0000000..7f5ec3b +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -0,0 +1,2137 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-main.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/fb.h> ++#include <linux/dma-mapping.h> ++#include <linux/vmalloc.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/omapfb.h> ++ ++#include <mach/display.h> ++#include <mach/vram.h> ++#include <mach/vrfb.h> ++ ++#include "omapfb.h" ++ ++#define MODULE_NAME "omapfb" ++ ++#define OMAPFB_PLANE_XRES_MIN 8 ++#define OMAPFB_PLANE_YRES_MIN 8 ++ ++static char *def_mode; ++static char *def_vram; ++static int def_vrfb; ++static int def_rotate; ++static int def_mirror; ++ ++#ifdef DEBUG ++unsigned int omapfb_debug; ++module_param_named(debug, omapfb_debug, bool, 0644); ++static unsigned int omapfb_test_pattern; ++module_param_named(test, omapfb_test_pattern, bool, 0644); ++#endif ++ ++static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi); ++ ++#ifdef DEBUG ++static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ void __iomem *addr = fbi->screen_base; ++ const unsigned bytespp = var->bits_per_pixel >> 3; ++ const unsigned line_len = fix->line_length / bytespp; ++ ++ int r = (color >> 16) & 0xff; ++ int g = (color >> 8) & 0xff; ++ int b = (color >> 0) & 0xff; ++ ++ if (var->bits_per_pixel == 16) { ++ u16 __iomem *p = (u16 __iomem *)addr; ++ p += y * line_len + x; ++ ++ r = r * 32 / 256; ++ g = g * 64 / 256; ++ b = b * 32 / 256; ++ ++ __raw_writew((r << 11) | (g << 5) | (b << 0), p); ++ } else if (var->bits_per_pixel == 24) { ++ u8 __iomem *p = (u8 __iomem *)addr; ++ p += (y * line_len + x) * 3; ++ ++ __raw_writeb(b, p + 0); ++ __raw_writeb(g, p + 1); ++ __raw_writeb(r, p + 2); ++ } else if (var->bits_per_pixel == 32) { ++ u32 __iomem *p = (u32 __iomem *)addr; ++ p += y * line_len + x; ++ __raw_writel(color, p); ++ } ++} ++ ++static void fill_fb(struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ const short w = var->xres_virtual; ++ const short h = var->yres_virtual; ++ void __iomem *addr = fbi->screen_base; ++ int y, x; ++ ++ if (!addr) ++ return; ++ ++ DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length); ++ ++ for (y = 0; y < h; y++) { ++ for (x = 0; x < w; x++) { ++ if (x < 20 && y < 20) ++ draw_pixel(fbi, x, y, 0xffffff); ++ else if (x < 20 && (y > 20 && y < h - 20)) ++ draw_pixel(fbi, x, y, 0xff); ++ else if (y < 20 && (x > 20 && x < w - 20)) ++ draw_pixel(fbi, x, y, 0xff00); ++ else if (x > w - 20 && (y > 20 && y < h - 20)) ++ draw_pixel(fbi, x, y, 0xff0000); ++ else if (y > h - 20 && (x > 20 && x < w - 20)) ++ draw_pixel(fbi, x, y, 0xffff00); ++ else if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ draw_pixel(fbi, x, y, 0xffffff); ++ else if (x == y || w - x == h - y) ++ draw_pixel(fbi, x, y, 0xff00ff); ++ else if (w - x == y || x == h - y) ++ draw_pixel(fbi, x, y, 0x00ffff); ++ else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) { ++ int t = x * 3 / w; ++ unsigned r = 0, g = 0, b = 0; ++ unsigned c; ++ if (var->bits_per_pixel == 16) { ++ if (t == 0) ++ b = (y % 32) * 256 / 32; ++ else if (t == 1) ++ g = (y % 64) * 256 / 64; ++ else if (t == 2) ++ r = (y % 32) * 256 / 32; ++ } else { ++ if (t == 0) ++ b = (y % 256); ++ else if (t == 1) ++ g = (y % 256); ++ else if (t == 2) ++ r = (y % 256); ++ } ++ c = (r << 16) | (g << 8) | (b << 0); ++ draw_pixel(fbi, x, y, c); ++ } else { ++ draw_pixel(fbi, x, y, 0); ++ } ++ } ++ } ++} ++#endif ++ ++static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot) ++{ ++ struct vrfb *vrfb = &ofbi->region.vrfb; ++ unsigned offset; ++ ++ switch (rot) { ++ case FB_ROTATE_UR: ++ offset = 0; ++ break; ++ case FB_ROTATE_CW: ++ offset = vrfb->yoffset; ++ break; ++ case FB_ROTATE_UD: ++ offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset; ++ break; ++ case FB_ROTATE_CCW: ++ offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN; ++ break; ++ default: ++ BUG(); ++ } ++ ++ offset *= vrfb->bytespp; ++ ++ return offset; ++} ++ ++static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot) ++{ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ return ofbi->region.vrfb.paddr[rot] ++ + omapfb_get_vrfb_offset(ofbi, rot); ++ } else { ++ return ofbi->region.paddr; ++ } ++} ++ ++static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) ++{ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) ++ return ofbi->region.vrfb.paddr[0]; ++ else ++ return ofbi->region.paddr; ++} ++ ++static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi) ++{ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) ++ return ofbi->region.vrfb.vaddr[0]; ++ else ++ return ofbi->region.vaddr; ++} ++ ++static struct omapfb_colormode omapfb_colormodes[] = { ++ { ++ .dssmode = OMAP_DSS_COLOR_UYVY, ++ .bits_per_pixel = 16, ++ .nonstd = OMAPFB_COLOR_YUV422, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_YUV2, ++ .bits_per_pixel = 16, ++ .nonstd = OMAPFB_COLOR_YUY422, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_ARGB16, ++ .bits_per_pixel = 16, ++ .red = { .length = 4, .offset = 8, .msb_right = 0 }, ++ .green = { .length = 4, .offset = 4, .msb_right = 0 }, ++ .blue = { .length = 4, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 4, .offset = 12, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB16, ++ .bits_per_pixel = 16, ++ .red = { .length = 5, .offset = 11, .msb_right = 0 }, ++ .green = { .length = 6, .offset = 5, .msb_right = 0 }, ++ .blue = { .length = 5, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB24P, ++ .bits_per_pixel = 24, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB24U, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_ARGB32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 8, .offset = 24, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGBA32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 24, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .transp = { .length = 8, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGBX32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 24, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, ++}; ++ ++static bool cmp_var_to_colormode(struct fb_var_screeninfo *var, ++ struct omapfb_colormode *color) ++{ ++ bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2) ++ { ++ return f1->length == f2->length && ++ f1->offset == f2->offset && ++ f1->msb_right == f2->msb_right; ++ } ++ ++ if (var->bits_per_pixel == 0 || ++ var->red.length == 0 || ++ var->blue.length == 0 || ++ var->green.length == 0) ++ return 0; ++ ++ return var->bits_per_pixel == color->bits_per_pixel && ++ cmp_component(&var->red, &color->red) && ++ cmp_component(&var->green, &color->green) && ++ cmp_component(&var->blue, &color->blue) && ++ cmp_component(&var->transp, &color->transp); ++} ++ ++static void assign_colormode_to_var(struct fb_var_screeninfo *var, ++ struct omapfb_colormode *color) ++{ ++ var->bits_per_pixel = color->bits_per_pixel; ++ var->nonstd = color->nonstd; ++ var->red = color->red; ++ var->green = color->green; ++ var->blue = color->blue; ++ var->transp = color->transp; ++} ++ ++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) ++{ ++ enum omap_color_mode dssmode; ++ int i; ++ ++ /* first match with nonstd field */ ++ if (var->nonstd) { ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (var->nonstd == mode->nonstd) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ return -EINVAL; ++ } ++ ++ /* then try exact match of bpp and colors */ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (cmp_var_to_colormode(var, mode)) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ /* match with bpp if user has not filled color fields ++ * properly */ ++ switch (var->bits_per_pixel) { ++ case 1: ++ dssmode = OMAP_DSS_COLOR_CLUT1; ++ break; ++ case 2: ++ dssmode = OMAP_DSS_COLOR_CLUT2; ++ break; ++ case 4: ++ dssmode = OMAP_DSS_COLOR_CLUT4; ++ break; ++ case 8: ++ dssmode = OMAP_DSS_COLOR_CLUT8; ++ break; ++ case 12: ++ dssmode = OMAP_DSS_COLOR_RGB12U; ++ break; ++ case 16: ++ dssmode = OMAP_DSS_COLOR_RGB16; ++ break; ++ case 24: ++ dssmode = OMAP_DSS_COLOR_RGB24P; ++ break; ++ case 32: ++ dssmode = OMAP_DSS_COLOR_RGB24U; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (dssmode == mode->dssmode) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ return -EINVAL; ++} ++ ++int dss_mode_to_fb_mode(enum omap_color_mode dssmode, ++ struct fb_var_screeninfo *var) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (dssmode == mode->dssmode) { ++ assign_colormode_to_var(var, mode); ++ return 0; ++ } ++ } ++ return -ENOENT; ++} ++ ++void set_fb_fix(struct fb_info *fbi) ++{ ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_mem_region *rg = &ofbi->region; ++ ++ DBG("set_fb_fix\n"); ++ ++ /* used by open/write in fbmem.c */ ++ fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); ++ ++ DBG("changing rotation to %d\n", var->rotate); ++ ++ /* used by mmap in fbmem.c */ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ switch (var->nonstd) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ fix->line_length = ++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; ++ break; ++ default: ++ fix->line_length = ++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; ++ break; ++ } ++ } else ++ fix->line_length = ++ (var->xres_virtual * var->bits_per_pixel) >> 3; ++ fix->smem_start = omapfb_get_region_paddr(ofbi); ++ fix->smem_len = rg->size; ++ ++ fix->type = FB_TYPE_PACKED_PIXELS; ++ ++ if (var->nonstd) ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ else { ++ switch (var->bits_per_pixel) { ++ case 32: ++ case 24: ++ case 16: ++ case 12: ++ fix->visual = FB_VISUAL_TRUECOLOR; ++ /* 12bpp is stored in 16 bits */ ++ break; ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ break; ++ } ++ } ++ ++ fix->accel = FB_ACCEL_NONE; ++ ++ fix->xpanstep = 1; ++ fix->ypanstep = 1; ++ ++ if (rg->size && ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ unsigned bytespp; ++ bool yuv_mode; ++ enum omap_color_mode mode; ++ ++ mode = fb_mode_to_dss_mode(var); ++ ++ bytespp = var->bits_per_pixel >> 3; ++ ++ if (mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY) ++ yuv_mode = true; ++ else ++ yuv_mode = false; ++ ++ omap_vrfb_setup(&rg->vrfb, rg->paddr, ++ var->xres_virtual, ++ var->yres_virtual, ++ bytespp, yuv_mode); ++ } ++} ++ ++/* check new var and possibly modify it to be ok */ ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_dss_device *display = fb2display(fbi); ++ unsigned long max_frame_size; ++ unsigned long line_size; ++ int xres_min, yres_min; ++ int xres_max, yres_max; ++ enum omap_color_mode mode = 0; ++ int i; ++ int bytespp; ++ ++ DBG("check_fb_var %d\n", ofbi->id); ++ ++ if (ofbi->region.size == 0) ++ return 0; ++ ++ mode = fb_mode_to_dss_mode(var); ++ if (mode < 0) { ++ DBG("cannot convert var to omap dss mode\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; ++i) { ++ if ((ofbi->overlays[i]->supported_modes & mode) == 0) { ++ DBG("invalid mode\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if (var->rotate < 0 || var->rotate > 3) ++ return -EINVAL; ++ ++ xres_min = OMAPFB_PLANE_XRES_MIN; ++ xres_max = 2048; ++ yres_min = OMAPFB_PLANE_YRES_MIN; ++ yres_max = 2048; ++ ++ bytespp = var->bits_per_pixel >> 3; ++ ++ /* XXX: some applications seem to set virtual res to 0. */ ++ if (var->xres_virtual == 0) ++ var->xres_virtual = var->xres; ++ ++ if (var->yres_virtual == 0) ++ var->yres_virtual = var->yres; ++ ++ if (var->xres_virtual < xres_min || var->yres_virtual < yres_min) ++ return -EINVAL; ++ ++ if (var->xres < xres_min) ++ var->xres = xres_min; ++ if (var->yres < yres_min) ++ var->yres = yres_min; ++ if (var->xres > xres_max) ++ var->xres = xres_max; ++ if (var->yres > yres_max) ++ var->yres = yres_max; ++ ++ if (var->xres > var->xres_virtual) ++ var->xres = var->xres_virtual; ++ if (var->yres > var->yres_virtual) ++ var->yres = var->yres_virtual; ++ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) ++ line_size = OMAP_VRFB_LINE_LEN * bytespp; ++ else ++ line_size = var->xres_virtual * bytespp; ++ ++ max_frame_size = ofbi->region.size; ++ ++ DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size); ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("can't fit FB into memory, reducing y\n"); ++ var->yres_virtual = max_frame_size / line_size; ++ ++ if (var->yres_virtual < yres_min) ++ var->yres_virtual = yres_min; ++ ++ if (var->yres > var->yres_virtual) ++ var->yres = var->yres_virtual; ++ } ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("can't fit FB into memory, reducing x\n"); ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) ++ return -EINVAL; ++ ++ var->xres_virtual = max_frame_size / var->yres_virtual / ++ bytespp; ++ ++ if (var->xres_virtual < xres_min) ++ var->xres_virtual = xres_min; ++ ++ if (var->xres > var->xres_virtual) ++ var->xres = var->xres_virtual; ++ ++ line_size = var->xres_virtual * bytespp; ++ } ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("cannot fit FB to memory\n"); ++ return -EINVAL; ++ } ++ ++ if (var->xres + var->xoffset > var->xres_virtual) ++ var->xoffset = var->xres_virtual - var->xres; ++ if (var->yres + var->yoffset > var->yres_virtual) ++ var->yoffset = var->yres_virtual - var->yres; ++ ++ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", ++ var->xres, var->yres, ++ var->xres_virtual, var->yres_virtual); ++ ++ var->height = -1; ++ var->width = -1; ++ var->grayscale = 0; ++ ++ if (display && display->get_timings) { ++ struct omap_video_timings timings; ++ display->get_timings(display, &timings); ++ ++ /* pixclock in ps, the rest in pixclock */ ++ var->pixclock = timings.pixel_clock != 0 ? ++ KHZ2PICOS(timings.pixel_clock) : ++ 0; ++ var->left_margin = timings.hfp; ++ var->right_margin = timings.hbp; ++ var->upper_margin = timings.vfp; ++ var->lower_margin = timings.vbp; ++ var->hsync_len = timings.hsw; ++ var->vsync_len = timings.vsw; ++ } else { ++ var->pixclock = 0; ++ var->left_margin = 0; ++ var->right_margin = 0; ++ var->upper_margin = 0; ++ var->lower_margin = 0; ++ var->hsync_len = 0; ++ var->vsync_len = 0; ++ } ++ ++ /* TODO: get these from panel->config */ ++ var->vmode = FB_VMODE_NONINTERLACED; ++ var->sync = 0; ++ ++ return 0; ++} ++ ++/* ++ * --------------------------------------------------------------------------- ++ * fbdev framework callbacks ++ * --------------------------------------------------------------------------- ++ */ ++static int omapfb_open(struct fb_info *fbi, int user) ++{ ++ return 0; ++} ++ ++static int omapfb_release(struct fb_info *fbi, int user) ++{ ++#if 0 ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_dss_device *display = fb2display(fbi); ++ ++ DBG("Closing fb with plane index %d\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++ ++ if (display && display->get_update_mode && display->update) { ++ /* XXX this update should be removed, I think. But it's ++ * good for debugging */ ++ if (display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) { ++ u16 w, h; ++ ++ if (display->sync) ++ display->sync(display); ++ ++ display->get_resolution(display, &w, &h); ++ display->update(display, 0, 0, w, h); ++ } ++ } ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_unlock(fbdev); ++#endif ++ return 0; ++} ++ ++/* setup overlay according to the fb */ ++static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ u16 posx, u16 posy, u16 outw, u16 outh) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ enum omap_color_mode mode = 0; ++ int offset; ++ u32 data_start_p; ++ void __iomem *data_start_v; ++ struct omap_overlay_info info; ++ int xres, yres; ++ int screen_width; ++ int mirror; ++ int rotation = var->rotate; ++ int i; ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ovl != ofbi->overlays[i]) ++ continue; ++ ++ rotation = (rotation + ofbi->rotation[i]) % 4; ++ break; ++ } ++ ++ DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, ++ posx, posy, outw, outh); ++ ++ if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) { ++ xres = var->yres; ++ yres = var->xres; ++ } else { ++ xres = var->xres; ++ yres = var->yres; ++ } ++ ++ offset = ((var->yoffset * var->xres_virtual + ++ var->xoffset) * var->bits_per_pixel) >> 3; ++ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); ++ data_start_v = NULL; ++ } else { ++ data_start_p = omapfb_get_region_paddr(ofbi); ++ data_start_v = omapfb_get_region_vaddr(ofbi); ++ } ++ ++ data_start_p += offset; ++ data_start_v += offset; ++ ++ mode = fb_mode_to_dss_mode(var); ++ ++ if (mode == -EINVAL) { ++ DBG("fb_mode_to_dss_mode failed"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ switch (var->nonstd) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ screen_width = fix->line_length ++ / (var->bits_per_pixel >> 2); ++ break; ++ } ++ default: ++ screen_width = fix->line_length / (var->bits_per_pixel >> 3); ++ break; ++ } ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) ++ mirror = 0; ++ else ++ mirror = ofbi->mirror; ++ ++ info.paddr = data_start_p; ++ info.vaddr = data_start_v; ++ info.screen_width = screen_width; ++ info.width = xres; ++ info.height = yres; ++ info.color_mode = mode; ++ info.rotation_type = ofbi->rotation_type; ++ info.rotation = rotation; ++ info.mirror = mirror; ++ ++ info.pos_x = posx; ++ info.pos_y = posy; ++ info.out_width = outw; ++ info.out_height = outh; ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) { ++ DBG("ovl->setup_overlay_info failed\n"); ++ goto err; ++ } ++ ++ return 0; ++ ++err: ++ DBG("setup_overlay failed\n"); ++ return r; ++} ++ ++/* apply var to the overlay */ ++int omapfb_apply_changes(struct fb_info *fbi, int init) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omap_overlay *ovl; ++ u16 posx, posy; ++ u16 outw, outh; ++ int i; ++ ++#ifdef DEBUG ++ if (omapfb_test_pattern) ++ fill_fb(fbi); ++#endif ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ ovl = ofbi->overlays[i]; ++ ++ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); ++ ++ if (ofbi->region.size == 0) { ++ /* the fb is not available. disable the overlay */ ++ omapfb_overlay_enable(ovl, 0); ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ continue; ++ } ++ ++ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ int rotation = (var->rotate + ofbi->rotation[i]) % 4; ++ if (rotation == FB_ROTATE_CW || ++ rotation == FB_ROTATE_CCW) { ++ outw = var->yres; ++ outh = var->xres; ++ } else { ++ outw = var->xres; ++ outh = var->yres; ++ } ++ } else { ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ } ++ ++ if (init) { ++ posx = 0; ++ posy = 0; ++ } else { ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); ++ if (r) ++ goto err; ++ ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ } ++ return 0; ++err: ++ DBG("apply_changes failed\n"); ++ return r; ++} ++ ++/* checks var and eventually tweaks it to something supported, ++ * DO NOT MODIFY PAR */ ++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("check_var(%d)\n", FB2OFB(fbi)->id); ++ ++ r = check_fb_var(fbi, var); ++ ++ return r; ++} ++ ++/* set the video mode according to info->var */ ++static int omapfb_set_par(struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("set_par(%d)\n", FB2OFB(fbi)->id); ++ ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ ++ return r; ++} ++ ++static int omapfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int r = 0; ++ ++ DBG("pan_display(%d)\n", ofbi->id); ++ ++ if (var->xoffset != fbi->var.xoffset || ++ var->yoffset != fbi->var.yoffset) { ++ struct fb_var_screeninfo new_var; ++ ++ new_var = fbi->var; ++ new_var.xoffset = var->xoffset; ++ new_var.yoffset = var->yoffset; ++ ++ r = check_fb_var(fbi, &new_var); ++ ++ if (r == 0) { ++ fbi->var = new_var; ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ } ++ } ++ ++ return r; ++} ++ ++static void mmap_user_open(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_inc(&ofbi->map_count); ++} ++ ++static void mmap_user_close(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_dec(&ofbi->map_count); ++} ++ ++static struct vm_operations_struct mmap_user_ops = { ++ .open = mmap_user_open, ++ .close = mmap_user_close, ++}; ++ ++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ unsigned long off; ++ unsigned long start; ++ u32 len; ++ ++ if (vma->vm_end - vma->vm_start == 0) ++ return 0; ++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) ++ return -EINVAL; ++ off = vma->vm_pgoff << PAGE_SHIFT; ++ ++ start = omapfb_get_region_paddr(ofbi); ++ len = fix->smem_len; ++ if (off >= len) ++ return -EINVAL; ++ if ((vma->vm_end - vma->vm_start + off) > len) ++ return -EINVAL; ++ ++ off += start; ++ ++ DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off); ++ ++ vma->vm_pgoff = off >> PAGE_SHIFT; ++ vma->vm_flags |= VM_IO | VM_RESERVED; ++ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ++ vma->vm_ops = &mmap_user_ops; ++ vma->vm_private_data = ofbi; ++ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, ++ vma->vm_end - vma->vm_start, vma->vm_page_prot)) ++ return -EAGAIN; ++ /* vm_ops.open won't be called for mmap itself. */ ++ atomic_inc(&ofbi->map_count); ++ return 0; ++} ++ ++/* Store a single color palette entry into a pseudo palette or the hardware ++ * palette if one is available. For now we support only 16bpp and thus store ++ * the entry only to the pseudo palette. ++ */ ++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, ++ u_int blue, u_int transp, int update_hw_pal) ++{ ++ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ ++ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ ++ struct fb_var_screeninfo *var = &fbi->var; ++ int r = 0; ++ ++ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ ++ ++ /*switch (plane->color_mode) {*/ ++ switch (mode) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUV420: ++ case OMAPFB_COLOR_YUY422: ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ case OMAPFB_COLOR_CLUT_4BPP: ++ case OMAPFB_COLOR_CLUT_2BPP: ++ case OMAPFB_COLOR_CLUT_1BPP: ++ /* ++ if (fbdev->ctrl->setcolreg) ++ r = fbdev->ctrl->setcolreg(regno, red, green, blue, ++ transp, update_hw_pal); ++ */ ++ /* Fallthrough */ ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_RGB565: ++ case OMAPFB_COLOR_RGB444: ++ case OMAPFB_COLOR_RGB24P: ++ case OMAPFB_COLOR_RGB24U: ++ if (r != 0) ++ break; ++ ++ if (regno < 0) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (regno < 16) { ++ u16 pal; ++ pal = ((red >> (16 - var->red.length)) << ++ var->red.offset) | ++ ((green >> (16 - var->green.length)) << ++ var->green.offset) | ++ (blue >> (16 - var->blue.length)); ++ ((u32 *)(fbi->pseudo_palette))[regno] = pal; ++ } ++ break; ++ default: ++ BUG(); ++ } ++ return r; ++} ++ ++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ DBG("setcolreg\n"); ++ ++ return _setcolreg(info, regno, red, green, blue, transp, 1); ++} ++ ++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) ++{ ++ int count, index, r; ++ u16 *red, *green, *blue, *transp; ++ u16 trans = 0xffff; ++ ++ DBG("setcmap\n"); ++ ++ red = cmap->red; ++ green = cmap->green; ++ blue = cmap->blue; ++ transp = cmap->transp; ++ index = cmap->start; ++ ++ for (count = 0; count < cmap->len; count++) { ++ if (transp) ++ trans = *transp++; ++ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, ++ count == cmap->len - 1); ++ if (r != 0) ++ return r; ++ } ++ ++ return 0; ++} ++ ++static void omapfb_vrfb_suspend_all(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ if (ofbi->region.vrfb.vaddr[0]) ++ omap_vrfb_suspend_ctx(&ofbi->region.vrfb); ++ } ++} ++ ++static void omapfb_vrfb_resume_all(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ if (ofbi->region.vrfb.vaddr[0]) ++ omap_vrfb_resume_ctx(&ofbi->region.vrfb); ++ } ++} ++ ++static int omapfb_blank(int blank, struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_dss_device *display = fb2display(fbi); ++ int do_update = 0; ++ int r = 0; ++ ++ omapfb_lock(fbdev); ++ ++ switch (blank) { ++ case FB_BLANK_UNBLANK: ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ goto exit; ++ ++ omapfb_vrfb_resume_all(fbdev); ++ ++ if (display->resume) ++ r = display->resume(display); ++ ++ if (r == 0 && display->get_update_mode && ++ display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) ++ do_update = 1; ++ ++ break; ++ ++ case FB_BLANK_NORMAL: ++ /* FB_BLANK_NORMAL could be implemented. ++ * Needs DSS additions. */ ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_POWERDOWN: ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ goto exit; ++ ++ if (display->suspend) ++ r = display->suspend(display); ++ ++ omapfb_vrfb_suspend_all(fbdev); ++ ++ break; ++ ++ default: ++ r = -EINVAL; ++ } ++ ++exit: ++ omapfb_unlock(fbdev); ++ ++ if (r == 0 && do_update && display->update) { ++ u16 w, h; ++ display->get_resolution(display, &w, &h); ++ ++ r = display->update(display, 0, 0, w, h); ++ } ++ ++ return r; ++} ++ ++#if 0 ++/* XXX fb_read and fb_write are needed for VRFB */ ++ssize_t omapfb_write(struct fb_info *info, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos); ++ /* XXX needed for VRFB */ ++ return count; ++} ++#endif ++ ++static struct fb_ops omapfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = omapfb_open, ++ .fb_release = omapfb_release, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_blank = omapfb_blank, ++ .fb_ioctl = omapfb_ioctl, ++ .fb_check_var = omapfb_check_var, ++ .fb_set_par = omapfb_set_par, ++ .fb_pan_display = omapfb_pan_display, ++ .fb_mmap = omapfb_mmap, ++ .fb_setcolreg = omapfb_setcolreg, ++ .fb_setcmap = omapfb_setcmap, ++ /*.fb_write = omapfb_write,*/ ++}; ++ ++static void omapfb_free_fbmem(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ ++ rg = &ofbi->region; ++ ++ if (rg->paddr) ++ if (omap_vram_free(rg->paddr, rg->size)) ++ dev_err(fbdev->dev, "VRAM FREE failed\n"); ++ ++ if (rg->vaddr) ++ iounmap(rg->vaddr); ++ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ /* unmap the 0 angle rotation */ ++ if (rg->vrfb.vaddr[0]) { ++ iounmap(rg->vrfb.vaddr[0]); ++ omap_vrfb_release_ctx(&rg->vrfb); ++ } ++ } ++ ++ rg->vaddr = NULL; ++ rg->paddr = 0; ++ rg->alloc = 0; ++ rg->size = 0; ++} ++ ++static void clear_fb_info(struct fb_info *fbi) ++{ ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id)); ++} ++ ++static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free all fbmem\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct fb_info *fbi = fbdev->fbs[i]; ++ omapfb_free_fbmem(fbi); ++ clear_fb_info(fbi); ++ } ++ ++ return 0; ++} ++ ++static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, ++ unsigned long paddr) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ void __iomem *vaddr; ++ int r; ++ ++ rg = &ofbi->region; ++ memset(rg, 0, sizeof(*rg)); ++ ++ size = PAGE_ALIGN(size); ++ ++ if (!paddr) { ++ DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); ++ r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr); ++ } else { ++ DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr, ++ ofbi->id); ++ r = omap_vram_reserve(paddr, size); ++ } ++ ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate framebuffer\n"); ++ return -ENOMEM; ++ } ++ ++ if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) { ++ vaddr = ioremap_wc(paddr, size); ++ ++ if (!vaddr) { ++ dev_err(fbdev->dev, "failed to ioremap framebuffer\n"); ++ omap_vram_free(paddr, size); ++ return -ENOMEM; ++ } ++ ++ DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); ++ } else { ++ void __iomem *va; ++ ++ r = omap_vrfb_request_ctx(&rg->vrfb); ++ if (r) { ++ dev_err(fbdev->dev, "vrfb create ctx failed\n"); ++ return r; ++ } ++ ++ /* only ioremap the 0 angle view */ ++ va = ioremap_wc(rg->vrfb.paddr[0], size); ++ ++ if (!va) { ++ printk(KERN_ERR "vrfb: ioremap failed\n"); ++ omap_vrfb_release_ctx(&rg->vrfb); ++ return -ENOMEM; ++ } ++ ++ DBG("ioremapped vrfb area 0 to %p\n", va); ++ ++ rg->vrfb.vaddr[0] = va; ++ ++ vaddr = NULL; ++ } ++ ++ rg->paddr = paddr; ++ rg->vaddr = vaddr; ++ rg->size = size; ++ rg->alloc = 1; ++ ++ return 0; ++} ++ ++/* allocate fbmem using display resolution as reference */ ++static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, ++ unsigned long paddr) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_dss_device *display; ++ int bytespp; ++ ++ display = fb2display(fbi); ++ ++ if (!display) ++ return 0; ++ ++ switch (display->get_recommended_bpp(display)) { ++ case 16: ++ bytespp = 2; ++ break; ++ case 24: ++ bytespp = 4; ++ break; ++ default: ++ bytespp = 4; ++ break; ++ } ++ ++ if (!size) { ++ u16 w, h; ++ ++ display->get_resolution(display, &w, &h); ++ ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++#ifdef DEBUG ++ int oldw = w, oldh = h; ++#endif ++ ++ omap_vrfb_adjust_size(&w, &h, bytespp); ++ ++ /* Because we change the resolution of the 0 degree ++ * view, we need to alloc max(w, h) for height */ ++ h = max(w, h); ++ w = OMAP_VRFB_LINE_LEN; ++ ++ DBG("adjusting fb mem size for VRFB, %dx%d -> %dx%d\n", ++ oldw, oldh, w, h); ++ } ++ ++ size = w * h * bytespp; ++ } ++ ++ if (!size) ++ return 0; ++ ++ return omapfb_alloc_fbmem(fbi, size, paddr); ++} ++ ++static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt) ++{ ++ enum omap_color_mode mode; ++ ++ switch (fmt) { ++ case OMAPFB_COLOR_RGB565: ++ mode = OMAP_DSS_COLOR_RGB16; ++ break; ++ case OMAPFB_COLOR_YUV422: ++ mode = OMAP_DSS_COLOR_YUV2; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ mode = OMAP_DSS_COLOR_CLUT8; ++ break; ++ case OMAPFB_COLOR_CLUT_4BPP: ++ mode = OMAP_DSS_COLOR_CLUT4; ++ break; ++ case OMAPFB_COLOR_CLUT_2BPP: ++ mode = OMAP_DSS_COLOR_CLUT2; ++ break; ++ case OMAPFB_COLOR_CLUT_1BPP: ++ mode = OMAP_DSS_COLOR_CLUT1; ++ break; ++ case OMAPFB_COLOR_RGB444: ++ mode = OMAP_DSS_COLOR_RGB12U; ++ break; ++ case OMAPFB_COLOR_YUY422: ++ mode = OMAP_DSS_COLOR_UYVY; ++ break; ++ case OMAPFB_COLOR_ARGB16: ++ mode = OMAP_DSS_COLOR_ARGB16; ++ break; ++ case OMAPFB_COLOR_RGB24U: ++ mode = OMAP_DSS_COLOR_RGB24U; ++ break; ++ case OMAPFB_COLOR_RGB24P: ++ mode = OMAP_DSS_COLOR_RGB24P; ++ break; ++ case OMAPFB_COLOR_ARGB32: ++ mode = OMAP_DSS_COLOR_ARGB32; ++ break; ++ case OMAPFB_COLOR_RGBA32: ++ mode = OMAP_DSS_COLOR_RGBA32; ++ break; ++ case OMAPFB_COLOR_RGBX32: ++ mode = OMAP_DSS_COLOR_RGBX32; ++ break; ++ default: ++ mode = -EINVAL; ++ } ++ ++ return mode; ++} ++ ++static int omapfb_parse_vram_param(const char *param, int max_entries, ++ unsigned long *sizes, unsigned long *paddrs) ++{ ++ int fbnum; ++ unsigned long size; ++ unsigned long paddr = 0; ++ char *p, *start; ++ ++ start = (char *)param; ++ ++ while (1) { ++ p = start; ++ ++ fbnum = simple_strtoul(p, &p, 10); ++ ++ if (p == param) ++ return -EINVAL; ++ ++ if (*p != ':') ++ return -EINVAL; ++ ++ if (fbnum >= max_entries) ++ return -EINVAL; ++ ++ size = memparse(p + 1, &p); ++ ++ if (!size) ++ return -EINVAL; ++ ++ paddr = 0; ++ ++ if (*p == '@') { ++ paddr = simple_strtoul(p + 1, &p, 16); ++ ++ if (!paddr) ++ return -EINVAL; ++ ++ } ++ ++ paddrs[fbnum] = paddr; ++ sizes[fbnum] = size; ++ ++ if (*p == 0) ++ break; ++ ++ if (*p != ',') ++ return -EINVAL; ++ ++ ++p; ++ ++ start = p; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) ++{ ++ int i, r; ++ unsigned long vram_sizes[10]; ++ unsigned long vram_paddrs[10]; ++ ++ memset(&vram_sizes, 0, sizeof(vram_sizes)); ++ memset(&vram_paddrs, 0, sizeof(vram_paddrs)); ++ ++ if (def_vram && omapfb_parse_vram_param(def_vram, 10, ++ vram_sizes, vram_paddrs)) { ++ dev_err(fbdev->dev, "failed to parse vram parameter\n"); ++ ++ memset(&vram_sizes, 0, sizeof(vram_sizes)); ++ memset(&vram_paddrs, 0, sizeof(vram_paddrs)); ++ } ++ ++ if (fbdev->dev->platform_data) { ++ struct omapfb_platform_data *opd; ++ opd = fbdev->dev->platform_data; ++ for (i = 0; i < opd->mem_desc.region_cnt; ++i) { ++ if (!vram_sizes[i]) { ++ unsigned long size; ++ unsigned long paddr; ++ ++ size = opd->mem_desc.region[i].size; ++ paddr = opd->mem_desc.region[i].paddr; ++ ++ vram_sizes[i] = size; ++ vram_paddrs[i] = paddr; ++ } ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ /* allocate memory automatically only for fb0, or if ++ * excplicitly defined with vram or plat data option */ ++ if (i == 0 || vram_sizes[i] != 0) { ++ r = omapfb_alloc_fbmem_display(fbdev->fbs[i], ++ vram_sizes[i], vram_paddrs[i]); ++ ++ if (r) ++ return r; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ struct omapfb2_mem_region *rg; ++ rg = &ofbi->region; ++ ++ DBG("region%d phys %08x virt %p size=%lu\n", ++ i, ++ rg->paddr, ++ rg->vaddr, ++ rg->size); ++ } ++ ++ return 0; ++} ++ ++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_dss_device *display = fb2display(fbi); ++ struct omapfb2_mem_region *rg = &ofbi->region; ++ unsigned long old_size = rg->size; ++ unsigned long old_paddr = rg->paddr; ++ int old_type = rg->type; ++ int r; ++ ++ if (type > OMAPFB_MEMTYPE_MAX) ++ return -EINVAL; ++ ++ size = PAGE_ALIGN(size); ++ ++ if (old_size == size && old_type == type) ++ return 0; ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_free_fbmem(fbi); ++ ++ if (size == 0) { ++ clear_fb_info(fbi); ++ return 0; ++ } ++ ++ r = omapfb_alloc_fbmem(fbi, size, 0); ++ ++ if (r) { ++ if (old_size) ++ omapfb_alloc_fbmem(fbi, old_size, old_paddr); ++ ++ if (rg->size == 0) ++ clear_fb_info(fbi); ++ ++ return r; ++ } ++ ++ if (old_size == size) ++ return 0; ++ ++ if (old_size == 0) { ++ DBG("initializing fb %d\n", ofbi->id); ++ r = omapfb_fb_init(fbdev, fbi); ++ if (r) { ++ DBG("omapfb_fb_init failed\n"); ++ goto err; ++ } ++ r = omapfb_apply_changes(fbi, 1); ++ if (r) { ++ DBG("omapfb_apply_changes failed\n"); ++ goto err; ++ } ++ } else { ++ struct fb_var_screeninfo new_var; ++ memcpy(&new_var, &fbi->var, sizeof(new_var)); ++ r = check_fb_var(fbi, &new_var); ++ if (r) ++ goto err; ++ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); ++ set_fb_fix(fbi); ++ } ++ ++ return 0; ++err: ++ omapfb_free_fbmem(fbi); ++ clear_fb_info(fbi); ++ return r; ++} ++ ++/* initialize fb_info, var, fix to something sane based on the display */ ++static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omap_dss_device *display = fb2display(fbi); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int r = 0; ++ ++ fbi->fbops = &omapfb_ops; ++ fbi->flags = FBINFO_FLAG_DEFAULT; ++ fbi->pseudo_palette = fbdev->pseudo_palette; ++ ++ if (ofbi->region.size == 0) { ++ clear_fb_info(fbi); ++ return 0; ++ } ++ ++ var->nonstd = 0; ++ var->bits_per_pixel = 0; ++ ++ var->rotate = def_rotate; ++ ++ /* ++ * Check if there is a default color format set in the board file, ++ * and use this format instead the default deducted from the ++ * display bpp. ++ */ ++ if (fbdev->dev->platform_data) { ++ struct omapfb_platform_data *opd; ++ int id = ofbi->id; ++ ++ opd = fbdev->dev->platform_data; ++ if (opd->mem_desc.region[id].format_used) { ++ enum omap_color_mode mode; ++ enum omapfb_color_format format; ++ ++ format = opd->mem_desc.region[id].format; ++ mode = fb_format_to_dss_mode(format); ++ if (mode < 0) { ++ r = mode; ++ goto err; ++ } ++ r = dss_mode_to_fb_mode(mode, var); ++ if (r < 0) ++ goto err; ++ } ++ } ++ ++ if (display) { ++ u16 w, h; ++ int rotation = (var->rotate + ofbi->rotation[0]) % 4; ++ ++ display->get_resolution(display, &w, &h); ++ ++ if (rotation == FB_ROTATE_CW || ++ rotation == FB_ROTATE_CCW) { ++ var->xres = h; ++ var->yres = w; ++ } else { ++ var->xres = w; ++ var->yres = h; ++ } ++ ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ ++ if (!var->bits_per_pixel) { ++ switch (display->get_recommended_bpp(display)) { ++ case 16: ++ var->bits_per_pixel = 16; ++ break; ++ case 24: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ dev_err(fbdev->dev, "illegal display " ++ "bpp\n"); ++ return -EINVAL; ++ } ++ } ++ } else { ++ /* if there's no display, let's just guess some basic values */ ++ var->xres = 320; ++ var->yres = 240; ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ if (!var->bits_per_pixel) ++ var->bits_per_pixel = 16; ++ } ++ ++ r = check_fb_var(fbi, var); ++ if (r) ++ goto err; ++ ++ set_fb_fix(fbi); ++ ++ r = fb_alloc_cmap(&fbi->cmap, 256, 0); ++ if (r) ++ dev_err(fbdev->dev, "unable to allocate color map memory\n"); ++ ++err: ++ return r; ++} ++ ++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ fb_dealloc_cmap(&fbi->cmap); ++} ++ ++ ++static void omapfb_free_resources(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free_resources\n"); ++ ++ if (fbdev == NULL) ++ return; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) ++ unregister_framebuffer(fbdev->fbs[i]); ++ ++ /* free the reserved fbmem */ ++ omapfb_free_all_fbmem(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ fbinfo_cleanup(fbdev, fbdev->fbs[i]); ++ framebuffer_release(fbdev->fbs[i]); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) ++ fbdev->displays[i]->disable(fbdev->displays[i]); ++ ++ omap_dss_put_device(fbdev->displays[i]); ++ } ++ ++ dev_set_drvdata(fbdev->dev, NULL); ++ kfree(fbdev); ++} ++ ++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) ++{ ++ int r, i; ++ ++ fbdev->num_fbs = 0; ++ ++ DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); ++ ++ /* allocate fb_infos */ ++ for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ ++ fbi = framebuffer_alloc(sizeof(struct omapfb_info), ++ fbdev->dev); ++ ++ if (fbi == NULL) { ++ dev_err(fbdev->dev, ++ "unable to allocate memory for plane info\n"); ++ return -ENOMEM; ++ } ++ ++ clear_fb_info(fbi); ++ ++ fbdev->fbs[i] = fbi; ++ ++ ofbi = FB2OFB(fbi); ++ ofbi->fbdev = fbdev; ++ ofbi->id = i; ++ ++ /* assign these early, so that fb alloc can use them */ ++ ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : ++ OMAP_DSS_ROT_DMA; ++ ofbi->mirror = def_mirror; ++ ++ fbdev->num_fbs++; ++ } ++ ++ DBG("fb_infos allocated\n"); ++ ++ /* assign overlays for the fbs */ ++ for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ ofbi->overlays[0] = fbdev->overlays[i]; ++ ofbi->num_overlays = 1; ++ } ++ ++ /* allocate fb memories */ ++ r = omapfb_allocate_all_fbs(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate fbmem\n"); ++ return r; ++ } ++ ++ DBG("fbmems allocated\n"); ++ ++ /* setup fb_infos */ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_fb_init(fbdev, fbdev->fbs[i]); ++ if (r) { ++ dev_err(fbdev->dev, "failed to setup fb_info\n"); ++ return r; ++ } ++ } ++ ++ DBG("fb_infos initialized\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = register_framebuffer(fbdev->fbs[i]); ++ if (r != 0) { ++ dev_err(fbdev->dev, ++ "registering framebuffer %d failed\n", i); ++ return r; ++ } ++ } ++ ++ DBG("framebuffers registered\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_apply_changes(fbdev->fbs[i], 1); ++ if (r) { ++ dev_err(fbdev->dev, "failed to change mode\n"); ++ return r; ++ } ++ } ++ ++ DBG("create sysfs for fbs\n"); ++ r = omapfb_create_sysfs(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to create sysfs entries\n"); ++ return r; ++ } ++ ++ /* Enable fb0 */ ++ if (fbdev->num_fbs > 0) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); ++ ++ if (ofbi->num_overlays > 0) { ++ struct omap_overlay *ovl = ofbi->overlays[0]; ++ ++ r = omapfb_overlay_enable(ovl, 1); ++ ++ if (r) { ++ dev_err(fbdev->dev, ++ "failed to enable overlay\n"); ++ return r; ++ } ++ } ++ } ++ ++ DBG("create_framebuffers done\n"); ++ ++ return 0; ++} ++ ++static int omapfb_mode_to_timings(const char *mode_str, ++ struct omap_video_timings *timings, u8 *bpp) ++{ ++ struct fb_info fbi; ++ struct fb_var_screeninfo var; ++ struct fb_ops fbops; ++ int r; ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ if (strcmp(mode_str, "pal") == 0) { ++ *timings = omap_dss_pal_timings; ++ *bpp = 0; ++ return 0; ++ } else if (strcmp(mode_str, "ntsc") == 0) { ++ *timings = omap_dss_ntsc_timings; ++ *bpp = 0; ++ return 0; ++ } ++#endif ++ ++ /* this is quite a hack, but I wanted to use the modedb and for ++ * that we need fb_info and var, so we create dummy ones */ ++ ++ memset(&fbi, 0, sizeof(fbi)); ++ memset(&var, 0, sizeof(var)); ++ memset(&fbops, 0, sizeof(fbops)); ++ fbi.fbops = &fbops; ++ ++ r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24); ++ ++ if (r != 0) { ++ timings->pixel_clock = PICOS2KHZ(var.pixclock); ++ timings->hfp = var.left_margin; ++ timings->hbp = var.right_margin; ++ timings->vfp = var.upper_margin; ++ timings->vbp = var.lower_margin; ++ timings->hsw = var.hsync_len; ++ timings->vsw = var.vsync_len; ++ timings->x_res = var.xres; ++ timings->y_res = var.yres; ++ ++ switch (var.bits_per_pixel) { ++ case 16: ++ *bpp = 16; ++ break; ++ case 24: ++ case 32: ++ default: ++ *bpp = 24; ++ break; ++ } ++ ++ return 0; ++ } else { ++ return -EINVAL; ++ } ++} ++ ++static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str) ++{ ++ int r; ++ u8 bpp; ++ struct omap_video_timings timings; ++ ++ r = omapfb_mode_to_timings(mode_str, &timings, &bpp); ++ if (r) ++ return r; ++ ++ display->panel.recommended_bpp = bpp; ++ ++ if (!display->check_timings || !display->set_timings) ++ return -EINVAL; ++ ++ r = display->check_timings(display, &timings); ++ if (r) ++ return r; ++ ++ display->set_timings(display, &timings); ++ ++ return 0; ++} ++ ++static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) ++{ ++ char *str, *options, *this_opt; ++ int r = 0; ++ ++ str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL); ++ strcpy(str, def_mode); ++ options = str; ++ ++ while (!r && (this_opt = strsep(&options, ",")) != NULL) { ++ char *p, *display_str, *mode_str; ++ struct omap_dss_device *display; ++ int i; ++ ++ p = strchr(this_opt, ':'); ++ if (!p) { ++ r = -EINVAL; ++ break; ++ } ++ ++ *p = 0; ++ display_str = this_opt; ++ mode_str = p + 1; ++ ++ display = NULL; ++ for (i = 0; i < fbdev->num_displays; ++i) { ++ if (strcmp(fbdev->displays[i]->name, ++ display_str) == 0) { ++ display = fbdev->displays[i]; ++ break; ++ } ++ } ++ ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = omapfb_set_def_mode(display, mode_str); ++ if (r) ++ break; ++ } ++ ++ kfree(str); ++ ++ return r; ++} ++ ++static int omapfb_probe(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = NULL; ++ int r = 0; ++ int i; ++ struct omap_overlay *ovl; ++ struct omap_dss_device *def_display; ++ struct omap_dss_device *dssdev; ++ ++ DBG("omapfb_probe\n"); ++ ++ if (pdev->num_resources != 0) { ++ dev_err(&pdev->dev, "probed for an unknown device\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); ++ if (fbdev == NULL) { ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ mutex_init(&fbdev->mtx); ++ ++ fbdev->dev = &pdev->dev; ++ platform_set_drvdata(pdev, fbdev); ++ ++ fbdev->num_displays = 0; ++ dssdev = NULL; ++ for_each_dss_dev(dssdev) { ++ omap_dss_get_device(dssdev); ++ fbdev->displays[fbdev->num_displays++] = dssdev; ++ } ++ ++ if (fbdev->num_displays == 0) { ++ dev_err(&pdev->dev, "no displays\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->num_overlays = omap_dss_get_num_overlays(); ++ for (i = 0; i < fbdev->num_overlays; i++) ++ fbdev->overlays[i] = omap_dss_get_overlay(i); ++ ++ fbdev->num_managers = omap_dss_get_num_overlay_managers(); ++ for (i = 0; i < fbdev->num_managers; i++) ++ fbdev->managers[i] = omap_dss_get_overlay_manager(i); ++ ++ if (def_mode && strlen(def_mode) > 0) { ++ if (omapfb_parse_def_modes(fbdev)) ++ dev_warn(&pdev->dev, "cannot parse default modes\n"); ++ } ++ ++ r = omapfb_create_framebuffers(fbdev); ++ if (r) ++ goto cleanup; ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_overlay_manager *mgr; ++ mgr = fbdev->managers[i]; ++ r = mgr->apply(mgr); ++ if (r) ++ dev_warn(fbdev->dev, "failed to apply dispc config\n"); ++ } ++ ++ DBG("mgr->apply'ed\n"); ++ ++ /* gfx overlay should be the default one. find a display ++ * connected to that, and use it as default display */ ++ ovl = omap_dss_get_overlay(0); ++ if (ovl->manager && ovl->manager->device) { ++ def_display = ovl->manager->device; ++ } else { ++ dev_warn(&pdev->dev, "cannot find default display\n"); ++ def_display = NULL; ++ } ++ ++ if (def_display) { ++ u16 w, h; ++ r = def_display->enable(def_display); ++ if (r) ++ dev_warn(fbdev->dev, "Failed to enable display '%s'\n", ++ def_display->name); ++ ++ /* set the update mode */ ++ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 1); ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++#else /* MANUAL_UPDATE */ ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 0); ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_MANUAL); ++ ++ def_display->get_resolution(def_display, &w, &h); ++ def_display->update(def_display, 0, 0, w, h); ++#endif ++ } else { ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ } ++ } ++ ++ return 0; ++ ++cleanup: ++ omapfb_free_resources(fbdev); ++err0: ++ dev_err(&pdev->dev, "failed to setup omapfb\n"); ++ return r; ++} ++ ++static int omapfb_remove(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ++ /* FIXME: wait till completion of pending events */ ++ ++ omapfb_remove_sysfs(fbdev); ++ ++ omapfb_free_resources(fbdev); ++ ++ return 0; ++} ++ ++static struct platform_driver omapfb_driver = { ++ .probe = omapfb_probe, ++ .remove = omapfb_remove, ++ .driver = { ++ .name = "omapfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omapfb_init(void) ++{ ++ DBG("omapfb_init\n"); ++ ++ if (platform_driver_register(&omapfb_driver)) { ++ printk(KERN_ERR "failed to register omapfb driver\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static void __exit omapfb_exit(void) ++{ ++ DBG("omapfb_exit\n"); ++ platform_driver_unregister(&omapfb_driver); ++} ++ ++module_param_named(mode, def_mode, charp, 0); ++module_param_named(vram, def_vram, charp, 0); ++module_param_named(rotate, def_rotate, int, 0); ++module_param_named(vrfb, def_vrfb, bool, 0); ++module_param_named(mirror, def_mirror, bool, 0); ++ ++/* late_initcall to let panel/ctrl drivers loaded first. ++ * I guess better option would be a more dynamic approach, ++ * so that omapfb reacts to new panels when they are loaded */ ++late_initcall(omapfb_init); ++/*module_init(omapfb_init);*/ ++module_exit(omapfb_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); ++MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); ++MODULE_LICENSE("GPL v2"); +diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c +new file mode 100644 +index 0000000..ef30e0e +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c +@@ -0,0 +1,507 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-sysfs.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/fb.h> ++#include <linux/sysfs.h> ++#include <linux/device.h> ++#include <linux/uaccess.h> ++#include <linux/platform_device.h> ++#include <linux/kernel.h> ++#include <linux/mm.h> ++#include <linux/omapfb.h> ++ ++#include <mach/display.h> ++#include <mach/vrfb.h> ++ ++#include "omapfb.h" ++ ++static ssize_t show_rotate_type(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type); ++} ++ ++static ssize_t store_rotate_type(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ enum omap_dss_rotation_type rot_type; ++ int r; ++ ++ rot_type = simple_strtoul(buf, NULL, 0); ++ ++ if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB) ++ return -EINVAL; ++ ++ lock_fb_info(fbi); ++ ++ r = 0; ++ if (rot_type == ofbi->rotation_type) ++ goto out; ++ ++ if (ofbi->region.size) { ++ r = -EBUSY; ++ goto out; ++ } ++ ++ ofbi->rotation_type = rot_type; ++ ++ /* ++ * Since the VRAM for this FB is not allocated at the moment we don't ++ * need to do any further parameter checking at this point. ++ */ ++out: ++ unlock_fb_info(fbi); ++ ++ return r ? r : count; ++} ++ ++ ++static ssize_t show_mirror(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror); ++} ++ ++static ssize_t store_mirror(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ bool mirror; ++ int r; ++ struct fb_var_screeninfo new_var; ++ ++ mirror = simple_strtoul(buf, NULL, 0); ++ ++ if (mirror != 0 && mirror != 1) ++ return -EINVAL; ++ ++ lock_fb_info(fbi); ++ ++ ofbi->mirror = mirror; ++ ++ memcpy(&new_var, &fbi->var, sizeof(new_var)); ++ r = check_fb_var(fbi, &new_var); ++ if (r) ++ goto out; ++ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); ++ ++ set_fb_fix(fbi); ++ ++ r = omapfb_apply_changes(fbi, 0); ++ if (r) ++ goto out; ++ ++ r = count; ++out: ++ unlock_fb_info(fbi); ++ ++ return r; ++} ++ ++static ssize_t show_overlays(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ssize_t l = 0; ++ int t; ++ ++ omapfb_lock(fbdev); ++ lock_fb_info(fbi); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl = ofbi->overlays[t]; ++ int ovlnum; ++ ++ for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum) ++ if (ovl == fbdev->overlays[ovlnum]) ++ break; ++ ++ l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", ++ t == 0 ? "" : ",", ovlnum); ++ } ++ ++ l += snprintf(buf + l, PAGE_SIZE - l, "\n"); ++ ++ unlock_fb_info(fbi); ++ omapfb_unlock(fbdev); ++ ++ return l; ++} ++ ++static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev, ++ struct omap_overlay *ovl) ++{ ++ int i, t; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ if (ofbi->overlays[t] == ovl) ++ return ofbi; ++ } ++ } ++ ++ return NULL; ++} ++ ++static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; ++ struct omap_overlay *ovl; ++ int num_ovls, r, i; ++ int len; ++ bool added = false; ++ ++ num_ovls = 0; ++ ++ len = strlen(buf); ++ if (buf[len - 1] == '\n') ++ len = len - 1; ++ ++ omapfb_lock(fbdev); ++ lock_fb_info(fbi); ++ ++ if (len > 0) { ++ char *p = (char *)buf; ++ int ovlnum; ++ ++ while (p < buf + len) { ++ int found; ++ if (num_ovls == OMAPFB_MAX_OVL_PER_FB) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ ovlnum = simple_strtoul(p, &p, 0); ++ if (ovlnum > fbdev->num_overlays) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ found = 0; ++ for (i = 0; i < num_ovls; ++i) { ++ if (ovls[i] == fbdev->overlays[ovlnum]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) ++ ovls[num_ovls++] = fbdev->overlays[ovlnum]; ++ ++ p++; ++ } ++ } ++ ++ for (i = 0; i < num_ovls; ++i) { ++ struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]); ++ if (ofbi2 && ofbi2 != ofbi) { ++ dev_err(fbdev->dev, "overlay already in use\n"); ++ r = -EINVAL; ++ goto out; ++ } ++ } ++ ++ /* detach unused overlays */ ++ for (i = 0; i < ofbi->num_overlays; ++i) { ++ int t, found; ++ ++ ovl = ofbi->overlays[i]; ++ ++ found = 0; ++ ++ for (t = 0; t < num_ovls; ++t) { ++ if (ovl == ovls[t]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (found) ++ continue; ++ ++ DBG("detaching %d\n", ofbi->overlays[i]->id); ++ ++ omapfb_overlay_enable(ovl, 0); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ for (t = i + 1; t < ofbi->num_overlays; t++) { ++ ofbi->rotation[t-1] = ofbi->rotation[t]; ++ ofbi->overlays[t-1] = ofbi->overlays[t]; ++ } ++ ++ ofbi->num_overlays--; ++ i--; ++ } ++ ++ for (i = 0; i < num_ovls; ++i) { ++ int t, found; ++ ++ ovl = ovls[i]; ++ ++ found = 0; ++ ++ for (t = 0; t < ofbi->num_overlays; ++t) { ++ if (ovl == ofbi->overlays[t]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (found) ++ continue; ++ ofbi->rotation[ofbi->num_overlays] = 0; ++ ofbi->overlays[ofbi->num_overlays++] = ovl; ++ ++ added = true; ++ } ++ ++ if (added) { ++ r = omapfb_apply_changes(fbi, 0); ++ if (r) ++ goto out; ++ } ++ ++ r = count; ++out: ++ unlock_fb_info(fbi); ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static ssize_t show_overlays_rotate(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ssize_t l = 0; ++ int t; ++ ++ lock_fb_info(fbi); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", ++ t == 0 ? "" : ",", ofbi->rotation[t]); ++ } ++ ++ l += snprintf(buf + l, PAGE_SIZE - l, "\n"); ++ ++ unlock_fb_info(fbi); ++ ++ return l; ++} ++ ++static ssize_t store_overlays_rotate(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int num_ovls = 0, r, i; ++ int len; ++ bool changed = false; ++ u8 rotation[OMAPFB_MAX_OVL_PER_FB]; ++ ++ len = strlen(buf); ++ if (buf[len - 1] == '\n') ++ len = len - 1; ++ ++ lock_fb_info(fbi); ++ ++ if (len > 0) { ++ char *p = (char *)buf; ++ ++ while (p < buf + len) { ++ int rot; ++ ++ if (num_ovls == ofbi->num_overlays) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ rot = simple_strtoul(p, &p, 0); ++ if (rot < 0 || rot > 3) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ if (ofbi->rotation[num_ovls] != rot) ++ changed = true; ++ ++ rotation[num_ovls++] = rot; ++ ++ p++; ++ } ++ } ++ ++ if (num_ovls != ofbi->num_overlays) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ if (changed) { ++ for (i = 0; i < num_ovls; ++i) ++ ofbi->rotation[i] = rotation[i]; ++ ++ r = omapfb_apply_changes(fbi, 0); ++ if (r) ++ goto out; ++ ++ /* FIXME error handling? */ ++ } ++ ++ r = count; ++out: ++ unlock_fb_info(fbi); ++ ++ return r; ++} ++ ++static ssize_t show_size(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size); ++} ++ ++static ssize_t store_size(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ unsigned long size; ++ int r; ++ int i; ++ ++ size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0)); ++ ++ lock_fb_info(fbi); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->info.enabled) { ++ r = -EBUSY; ++ goto out; ++ } ++ } ++ ++ if (size != ofbi->region.size) { ++ r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type); ++ if (r) { ++ dev_err(dev, "realloc fbmem failed\n"); ++ goto out; ++ } ++ } ++ ++ r = count; ++out: ++ unlock_fb_info(fbi); ++ ++ return r; ++} ++ ++static ssize_t show_phys(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr); ++} ++ ++static ssize_t show_virt(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr); ++} ++ ++static struct device_attribute omapfb_attrs[] = { ++ __ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type, ++ store_rotate_type), ++ __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror), ++ __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size), ++ __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays), ++ __ATTR(overlays_rotate, S_IRUGO | S_IWUSR, show_overlays_rotate, ++ store_overlays_rotate), ++ __ATTR(phys_addr, S_IRUGO, show_phys, NULL), ++ __ATTR(virt_addr, S_IRUGO, show_virt, NULL), ++}; ++ ++int omapfb_create_sysfs(struct omapfb2_device *fbdev) ++{ ++ int i; ++ int r; ++ ++ DBG("create sysfs for fbs\n"); ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ int t; ++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) { ++ r = device_create_file(fbdev->fbs[i]->dev, ++ &omapfb_attrs[t]); ++ ++ if (r) { ++ dev_err(fbdev->dev, "failed to create sysfs " ++ "file\n"); ++ return r; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev) ++{ ++ int i, t; ++ ++ DBG("remove sysfs for fbs\n"); ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) ++ device_remove_file(fbdev->fbs[i]->dev, ++ &omapfb_attrs[t]); ++ } ++} ++ +diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h +new file mode 100644 +index 0000000..d9ee986 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb.h +@@ -0,0 +1,146 @@ ++/* ++ * linux/drivers/video/omap2/omapfb.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++ ++#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT ++#define DEBUG ++#endif ++ ++#include <mach/display.h> ++ ++#ifdef DEBUG ++extern unsigned int omapfb_debug; ++#define DBG(format, ...) \ ++ if (omapfb_debug) \ ++ printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) ++ ++/* max number of overlays to which a framebuffer data can be direct */ ++#define OMAPFB_MAX_OVL_PER_FB 3 ++ ++struct omapfb2_mem_region { ++ u32 paddr; ++ void __iomem *vaddr; ++ struct vrfb vrfb; ++ unsigned long size; ++ u8 type; /* OMAPFB_PLANE_MEM_* */ ++ bool alloc; /* allocated by the driver */ ++ bool map; /* kernel mapped by the driver */ ++}; ++ ++/* appended to fb_info */ ++struct omapfb_info { ++ int id; ++ struct omapfb2_mem_region region; ++ atomic_t map_count; ++ int num_overlays; ++ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; ++ struct omapfb2_device *fbdev; ++ enum omap_dss_rotation_type rotation_type; ++ u8 rotation[OMAPFB_MAX_OVL_PER_FB]; ++ bool mirror; ++}; ++ ++struct omapfb2_device { ++ struct device *dev; ++ struct mutex mtx; ++ ++ u32 pseudo_palette[17]; ++ ++ int state; ++ ++ unsigned num_fbs; ++ struct fb_info *fbs[10]; ++ ++ unsigned num_displays; ++ struct omap_dss_device *displays[10]; ++ unsigned num_overlays; ++ struct omap_overlay *overlays[10]; ++ unsigned num_managers; ++ struct omap_overlay_manager *managers[10]; ++}; ++ ++struct omapfb_colormode { ++ enum omap_color_mode dssmode; ++ u32 bits_per_pixel; ++ u32 nonstd; ++ struct fb_bitfield red; ++ struct fb_bitfield green; ++ struct fb_bitfield blue; ++ struct fb_bitfield transp; ++}; ++ ++void set_fb_fix(struct fb_info *fbi); ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); ++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type); ++int omapfb_apply_changes(struct fb_info *fbi, int init); ++ ++int omapfb_create_sysfs(struct omapfb2_device *fbdev); ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev); ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); ++ ++int dss_mode_to_fb_mode(enum omap_color_mode dssmode, ++ struct fb_var_screeninfo *var); ++ ++/* find the display connected to this fb, if any */ ++static inline struct omap_dss_device *fb2display(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int i; ++ ++ /* XXX: returns the display connected to first attached overlay */ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) ++ return ofbi->overlays[i]->manager->device; ++ } ++ ++ return NULL; ++} ++ ++static inline void omapfb_lock(struct omapfb2_device *fbdev) ++{ ++ mutex_lock(&fbdev->mtx); ++} ++ ++static inline void omapfb_unlock(struct omapfb2_device *fbdev) ++{ ++ mutex_unlock(&fbdev->mtx); ++} ++ ++static inline int omapfb_overlay_enable(struct omap_overlay *ovl, ++ int enable) ++{ ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ info.enabled = enable; ++ return ovl->set_overlay_info(ovl, &info); ++} ++ ++#endif +diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c +new file mode 100644 +index 0000000..634ce23 +--- /dev/null ++++ b/drivers/video/omap2/vram.c +@@ -0,0 +1,655 @@ ++/* ++ * VRAM manager for OMAP ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++/*#define DEBUG*/ ++ ++#include <linux/kernel.h> ++#include <linux/mm.h> ++#include <linux/list.h> ++#include <linux/seq_file.h> ++#include <linux/bootmem.h> ++#include <linux/completion.h> ++#include <linux/debugfs.h> ++#include <linux/jiffies.h> ++#include <linux/module.h> ++ ++#include <asm/setup.h> ++ ++#include <mach/sram.h> ++#include <mach/vram.h> ++#include <mach/dma.h> ++ ++#ifdef DEBUG ++#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define OMAP2_SRAM_START 0x40200000 ++/* Maximum size, in reality this is smaller if SRAM is partially locked. */ ++#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ ++ ++/* postponed regions are used to temporarily store region information at boot ++ * time when we cannot yet allocate the region list */ ++#define MAX_POSTPONED_REGIONS 10 ++ ++static bool vram_initialized; ++static int postponed_cnt; ++static struct { ++ unsigned long paddr; ++ size_t size; ++} postponed_regions[MAX_POSTPONED_REGIONS]; ++ ++struct vram_alloc { ++ struct list_head list; ++ unsigned long paddr; ++ unsigned pages; ++}; ++ ++struct vram_region { ++ struct list_head list; ++ struct list_head alloc_list; ++ unsigned long paddr; ++ unsigned pages; ++}; ++ ++static DEFINE_MUTEX(region_mutex); ++static LIST_HEAD(region_list); ++ ++static inline int region_mem_type(unsigned long paddr) ++{ ++ if (paddr >= OMAP2_SRAM_START && ++ paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) ++ return OMAP_VRAM_MEMTYPE_SRAM; ++ else ++ return OMAP_VRAM_MEMTYPE_SDRAM; ++} ++ ++static struct vram_region *omap_vram_create_region(unsigned long paddr, ++ unsigned pages) ++{ ++ struct vram_region *rm; ++ ++ rm = kzalloc(sizeof(*rm), GFP_KERNEL); ++ ++ if (rm) { ++ INIT_LIST_HEAD(&rm->alloc_list); ++ rm->paddr = paddr; ++ rm->pages = pages; ++ } ++ ++ return rm; ++} ++ ++#if 0 ++static void omap_vram_free_region(struct vram_region *vr) ++{ ++ list_del(&vr->list); ++ kfree(vr); ++} ++#endif ++ ++static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, ++ unsigned long paddr, unsigned pages) ++{ ++ struct vram_alloc *va; ++ struct vram_alloc *new; ++ ++ new = kzalloc(sizeof(*va), GFP_KERNEL); ++ ++ if (!new) ++ return NULL; ++ ++ new->paddr = paddr; ++ new->pages = pages; ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ if (va->paddr > new->paddr) ++ break; ++ } ++ ++ list_add_tail(&new->list, &va->list); ++ ++ return new; ++} ++ ++static void omap_vram_free_allocation(struct vram_alloc *va) ++{ ++ list_del(&va->list); ++ kfree(va); ++} ++ ++int omap_vram_add_region(unsigned long paddr, size_t size) ++{ ++ struct vram_region *rm; ++ unsigned pages; ++ ++ if (vram_initialized) { ++ DBG("adding region paddr %08lx size %d\n", ++ paddr, size); ++ ++ size &= PAGE_MASK; ++ pages = size >> PAGE_SHIFT; ++ ++ rm = omap_vram_create_region(paddr, pages); ++ if (rm == NULL) ++ return -ENOMEM; ++ ++ list_add(&rm->list, ®ion_list); ++ } else { ++ if (postponed_cnt == MAX_POSTPONED_REGIONS) ++ return -ENOMEM; ++ ++ postponed_regions[postponed_cnt].paddr = paddr; ++ postponed_regions[postponed_cnt].size = size; ++ ++ ++postponed_cnt; ++ } ++ return 0; ++} ++ ++int omap_vram_free(unsigned long paddr, size_t size) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ unsigned start, end; ++ ++ DBG("free mem paddr %08lx size %d\n", paddr, size); ++ ++ size = PAGE_ALIGN(size); ++ ++ mutex_lock(®ion_mutex); ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ start = alloc->paddr; ++ end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); ++ ++ if (start >= paddr && end < paddr + size) ++ goto found; ++ } ++ } ++ ++ mutex_unlock(®ion_mutex); ++ return -EINVAL; ++ ++found: ++ omap_vram_free_allocation(alloc); ++ ++ mutex_unlock(®ion_mutex); ++ return 0; ++} ++EXPORT_SYMBOL(omap_vram_free); ++ ++static int _omap_vram_reserve(unsigned long paddr, unsigned pages) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ size_t size; ++ ++ size = pages << PAGE_SHIFT; ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ unsigned long start, end; ++ ++ DBG("checking region %lx %d\n", rm->paddr, rm->pages); ++ ++ if (region_mem_type(rm->paddr) != region_mem_type(paddr)) ++ continue; ++ ++ start = rm->paddr; ++ end = start + (rm->pages << PAGE_SHIFT) - 1; ++ if (start > paddr || end < paddr + size - 1) ++ continue; ++ ++ DBG("block ok, checking allocs\n"); ++ ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ end = alloc->paddr - 1; ++ ++ if (start <= paddr && end >= paddr + size - 1) ++ goto found; ++ ++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); ++ } ++ ++ end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1; ++ ++ if (!(start <= paddr && end >= paddr + size - 1)) ++ continue; ++found: ++ DBG("found area start %lx, end %lx\n", start, end); ++ ++ if (omap_vram_create_allocation(rm, paddr, pages) == NULL) ++ return -ENOMEM; ++ ++ return 0; ++ } ++ ++ return -ENOMEM; ++} ++ ++int omap_vram_reserve(unsigned long paddr, size_t size) ++{ ++ unsigned pages; ++ int r; ++ ++ DBG("reserve mem paddr %08lx size %d\n", paddr, size); ++ ++ size = PAGE_ALIGN(size); ++ pages = size >> PAGE_SHIFT; ++ ++ mutex_lock(®ion_mutex); ++ ++ r = _omap_vram_reserve(paddr, pages); ++ ++ mutex_unlock(®ion_mutex); ++ ++ return r; ++} ++EXPORT_SYMBOL(omap_vram_reserve); ++ ++static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data) ++{ ++ struct completion *compl = data; ++ complete(compl); ++} ++ ++static int _omap_vram_clear(u32 paddr, unsigned pages) ++{ ++ struct completion compl; ++ unsigned elem_count; ++ unsigned frame_count; ++ int r; ++ int lch; ++ ++ init_completion(&compl); ++ ++ r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA", ++ _omap_vram_dma_cb, ++ &compl, &lch); ++ if (r) { ++ pr_err("VRAM: request_dma failed for memory clear\n"); ++ return -EBUSY; ++ } ++ ++ elem_count = pages * PAGE_SIZE / 4; ++ frame_count = 1; ++ ++ omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32, ++ elem_count, frame_count, ++ OMAP_DMA_SYNC_ELEMENT, ++ 0, 0); ++ ++ omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC, ++ paddr, 0, 0); ++ ++ omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000); ++ ++ omap_start_dma(lch); ++ ++ if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) { ++ omap_stop_dma(lch); ++ pr_err("VRAM: dma timeout while clearing memory\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ r = 0; ++err: ++ omap_free_dma(lch); ++ ++ return r; ++} ++ ++static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ unsigned long start, end; ++ ++ DBG("checking region %lx %d\n", rm->paddr, rm->pages); ++ ++ if (region_mem_type(rm->paddr) != mtype) ++ continue; ++ ++ start = rm->paddr; ++ ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ end = alloc->paddr; ++ ++ if (end - start >= pages << PAGE_SHIFT) ++ goto found; ++ ++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); ++ } ++ ++ end = rm->paddr + (rm->pages << PAGE_SHIFT); ++found: ++ if (end - start < pages << PAGE_SHIFT) ++ continue; ++ ++ DBG("found %lx, end %lx\n", start, end); ++ ++ alloc = omap_vram_create_allocation(rm, start, pages); ++ if (alloc == NULL) ++ return -ENOMEM; ++ ++ *paddr = start; ++ ++ _omap_vram_clear(start, pages); ++ ++ return 0; ++ } ++ ++ return -ENOMEM; ++} ++ ++int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) ++{ ++ unsigned pages; ++ int r; ++ ++ BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size); ++ ++ DBG("alloc mem type %d size %d\n", mtype, size); ++ ++ size = PAGE_ALIGN(size); ++ pages = size >> PAGE_SHIFT; ++ ++ mutex_lock(®ion_mutex); ++ ++ r = _omap_vram_alloc(mtype, pages, paddr); ++ ++ mutex_unlock(®ion_mutex); ++ ++ return r; ++} ++EXPORT_SYMBOL(omap_vram_alloc); ++ ++void omap_vram_get_info(unsigned long *vram, ++ unsigned long *free_vram, ++ unsigned long *largest_free_block) ++{ ++ struct vram_region *vr; ++ struct vram_alloc *va; ++ ++ *vram = 0; ++ *free_vram = 0; ++ *largest_free_block = 0; ++ ++ mutex_lock(®ion_mutex); ++ ++ list_for_each_entry(vr, ®ion_list, list) { ++ unsigned free; ++ unsigned long pa; ++ ++ pa = vr->paddr; ++ *vram += vr->pages << PAGE_SHIFT; ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ free = va->paddr - pa; ++ *free_vram += free; ++ if (free > *largest_free_block) ++ *largest_free_block = free; ++ pa = va->paddr + (va->pages << PAGE_SHIFT); ++ } ++ ++ free = vr->paddr + (vr->pages << PAGE_SHIFT) - pa; ++ *free_vram += free; ++ if (free > *largest_free_block) ++ *largest_free_block = free; ++ } ++ ++ mutex_unlock(®ion_mutex); ++} ++EXPORT_SYMBOL(omap_vram_get_info); ++ ++#if defined(CONFIG_DEBUG_FS) ++static int vram_debug_show(struct seq_file *s, void *unused) ++{ ++ struct vram_region *vr; ++ struct vram_alloc *va; ++ unsigned size; ++ ++ mutex_lock(®ion_mutex); ++ ++ list_for_each_entry(vr, ®ion_list, list) { ++ size = vr->pages << PAGE_SHIFT; ++ seq_printf(s, "%08lx-%08lx (%d bytes)\n", ++ vr->paddr, vr->paddr + size - 1, ++ size); ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ size = va->pages << PAGE_SHIFT; ++ seq_printf(s, " %08lx-%08lx (%d bytes)\n", ++ va->paddr, va->paddr + size - 1, ++ size); ++ } ++ } ++ ++ mutex_unlock(®ion_mutex); ++ ++ return 0; ++} ++ ++static int vram_debug_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vram_debug_show, inode->i_private); ++} ++ ++static const struct file_operations vram_debug_fops = { ++ .open = vram_debug_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int __init omap_vram_create_debugfs(void) ++{ ++ struct dentry *d; ++ ++ d = debugfs_create_file("vram", S_IRUGO, NULL, ++ NULL, &vram_debug_fops); ++ if (IS_ERR(d)) ++ return PTR_ERR(d); ++ ++ return 0; ++} ++#endif ++ ++static __init int omap_vram_init(void) ++{ ++ int i; ++ ++ vram_initialized = 1; ++ ++ for (i = 0; i < postponed_cnt; i++) ++ omap_vram_add_region(postponed_regions[i].paddr, ++ postponed_regions[i].size); ++ ++#ifdef CONFIG_DEBUG_FS ++ if (omap_vram_create_debugfs()) ++ pr_err("VRAM: Failed to create debugfs file\n"); ++#endif ++ ++ return 0; ++} ++ ++arch_initcall(omap_vram_init); ++ ++/* boottime vram alloc stuff */ ++ ++/* set from board file */ ++static u32 omap_vram_sram_start __initdata; ++static u32 omap_vram_sram_size __initdata; ++ ++/* set from board file */ ++static u32 omap_vram_sdram_start __initdata; ++static u32 omap_vram_sdram_size __initdata; ++ ++/* set from kernel cmdline */ ++static u32 omap_vram_def_sdram_size __initdata; ++static u32 omap_vram_def_sdram_start __initdata; ++ ++static void __init omap_vram_early_vram(char **p) ++{ ++ omap_vram_def_sdram_size = memparse(*p, p); ++ if (**p == ',') ++ omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16); ++} ++__early_param("vram=", omap_vram_early_vram); ++ ++/* ++ * Called from map_io. We need to call to this early enough so that we ++ * can reserve the fixed SDRAM regions before VM could get hold of them. ++ */ ++void __init omap_vram_reserve_sdram(void) ++{ ++ struct bootmem_data *bdata; ++ unsigned long sdram_start, sdram_size; ++ u32 paddr; ++ u32 size = 0; ++ ++ /* cmdline arg overrides the board file definition */ ++ if (omap_vram_def_sdram_size) { ++ size = omap_vram_def_sdram_size; ++ paddr = omap_vram_def_sdram_start; ++ } ++ ++ if (!size) { ++ size = omap_vram_sdram_size; ++ paddr = omap_vram_sdram_start; ++ } ++ ++#ifdef CONFIG_OMAP2_VRAM_SIZE ++ if (!size) { ++ size = CONFIG_OMAP2_VRAM_SIZE * 1024 * 1024; ++ paddr = 0; ++ } ++#endif ++ ++ if (!size) ++ return; ++ ++ size = PAGE_ALIGN(size); ++ ++ bdata = NODE_DATA(0)->bdata; ++ sdram_start = bdata->node_min_pfn << PAGE_SHIFT; ++ sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; ++ ++ if (paddr) { ++ if ((paddr & ~PAGE_MASK) || paddr < sdram_start || ++ paddr + size > sdram_start + sdram_size) { ++ pr_err("Illegal SDRAM region for VRAM\n"); ++ return; ++ } ++ ++ if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) { ++ pr_err("FB: failed to reserve VRAM\n"); ++ return; ++ } ++ } else { ++ if (size > sdram_size) { ++ pr_err("Illegal SDRAM size for VRAM\n"); ++ return; ++ } ++ ++ paddr = virt_to_phys(alloc_bootmem_pages(size)); ++ BUG_ON(paddr & ~PAGE_MASK); ++ } ++ ++ omap_vram_add_region(paddr, size); ++ ++ pr_info("Reserving %u bytes SDRAM for VRAM\n", size); ++} ++ ++/* ++ * Called at sram init time, before anything is pushed to the SRAM stack. ++ * Because of the stack scheme, we will allocate everything from the ++ * start of the lowest address region to the end of SRAM. This will also ++ * include padding for page alignment and possible holes between regions. ++ * ++ * As opposed to the SDRAM case, we'll also do any dynamic allocations at ++ * this point, since the driver built as a module would have problem with ++ * freeing / reallocating the regions. ++ */ ++unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long pstart_avail, ++ unsigned long size_avail) ++{ ++ unsigned long pend_avail; ++ unsigned long reserved; ++ u32 paddr; ++ u32 size; ++ ++ paddr = omap_vram_sram_start; ++ size = omap_vram_sram_size; ++ ++ if (!size) ++ return 0; ++ ++ reserved = 0; ++ pend_avail = pstart_avail + size_avail; ++ ++ if (!paddr) { ++ /* Dynamic allocation */ ++ if ((size_avail & PAGE_MASK) < size) { ++ pr_err("Not enough SRAM for VRAM\n"); ++ return 0; ++ } ++ size_avail = (size_avail - size) & PAGE_MASK; ++ paddr = pstart_avail + size_avail; ++ } ++ ++ if (paddr < sram_pstart || ++ paddr + size > sram_pstart + sram_size) { ++ pr_err("Illegal SRAM region for VRAM\n"); ++ return 0; ++ } ++ ++ /* Reserve everything above the start of the region. */ ++ if (pend_avail - paddr > reserved) ++ reserved = pend_avail - paddr; ++ size_avail = pend_avail - reserved - pstart_avail; ++ ++ omap_vram_add_region(paddr, size); ++ ++ if (reserved) ++ pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); ++ ++ return reserved; ++} ++ ++void __init omap_vram_set_sdram_vram(u32 size, u32 start) ++{ ++ omap_vram_sdram_start = start; ++ omap_vram_sdram_size = size; ++} ++ ++void __init omap_vram_set_sram_vram(u32 size, u32 start) ++{ ++ omap_vram_sram_start = start; ++ omap_vram_sram_size = size; ++} +diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c +new file mode 100644 +index 0000000..8726689 +--- /dev/null ++++ b/drivers/video/omap2/vrfb.c +@@ -0,0 +1,277 @@ ++/* ++ * VRFB Rotation Engine ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/ioport.h> ++#include <linux/io.h> ++#include <linux/bitops.h> ++#include <linux/mutex.h> ++ ++#include <mach/io.h> ++#include <mach/vrfb.h> ++#include <mach/sdrc.h> ++/*#define DEBUG*/ ++ ++#ifdef DEBUG ++#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define SMS_ROT_VIRT_BASE(context, rot) \ ++ (((context >= 4) ? 0xD0000000 : 0x70000000) \ ++ + (0x4000000 * (context)) \ ++ + (0x1000000 * (rot))) ++ ++#define OMAP_VRFB_SIZE (2048 * 2048 * 4) ++ ++#define VRFB_PAGE_WIDTH_EXP 5 /* Assuming SDRAM pagesize= 1024 */ ++#define VRFB_PAGE_HEIGHT_EXP 5 /* 1024 = 2^5 * 2^5 */ ++#define VRFB_PAGE_WIDTH (1 << VRFB_PAGE_WIDTH_EXP) ++#define VRFB_PAGE_HEIGHT (1 << VRFB_PAGE_HEIGHT_EXP) ++#define SMS_IMAGEHEIGHT_OFFSET 16 ++#define SMS_IMAGEWIDTH_OFFSET 0 ++#define SMS_PH_OFFSET 8 ++#define SMS_PW_OFFSET 4 ++#define SMS_PS_OFFSET 0 ++ ++#define VRFB_NUM_CTXS 12 ++/* bitmap of reserved contexts */ ++static unsigned long ctx_map; ++/* bitmap of contexts for which we have to keep the HW context valid */ ++static unsigned long ctx_map_active; ++ ++static DEFINE_MUTEX(ctx_lock); ++ ++/* ++ * Access to this happens from client drivers or the PM core after wake-up. ++ * For the first case we require locking at the driver level, for the second ++ * we don't need locking, since no drivers will run until after the wake-up ++ * has finished. ++ */ ++static struct { ++ u32 physical_ba; ++ u32 control; ++ u32 size; ++} vrfb_hw_context[VRFB_NUM_CTXS]; ++ ++static inline void restore_hw_context(int ctx) ++{ ++ omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx); ++ omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx); ++ omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx); ++} ++ ++void omap_vrfb_restore_context(void) ++{ ++ int i; ++ unsigned long map = ctx_map_active; ++ ++ for (i = ffs(map); i; i = ffs(map)) { ++ /* i=1..32 */ ++ i--; ++ map &= ~(1 << i); ++ restore_hw_context(i); ++ } ++} ++ ++void omap_vrfb_adjust_size(u16 *width, u16 *height, ++ u8 bytespp) ++{ ++ *width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp; ++ *height = ALIGN(*height, VRFB_PAGE_HEIGHT); ++} ++EXPORT_SYMBOL(omap_vrfb_adjust_size); ++ ++void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, ++ u16 width, u16 height, ++ unsigned bytespp, bool yuv_mode) ++{ ++ unsigned pixel_size_exp; ++ u16 vrfb_width; ++ u16 vrfb_height; ++ u8 ctx = vrfb->context; ++ u32 size; ++ u32 control; ++ ++ DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr, ++ width, height, color_mode); ++ ++ /* For YUV2 and UYVY modes VRFB needs to handle pixels a bit ++ * differently. See TRM. */ ++ if (yuv_mode) { ++ bytespp *= 2; ++ width /= 2; ++ } ++ ++ if (bytespp == 4) ++ pixel_size_exp = 2; ++ else if (bytespp == 2) ++ pixel_size_exp = 1; ++ else ++ BUG(); ++ ++ vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp; ++ vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT); ++ ++ DBG("vrfb w %u, h %u bytespp %d\n", vrfb_width, vrfb_height, bytespp); ++ ++ size = vrfb_width << SMS_IMAGEWIDTH_OFFSET; ++ size |= vrfb_height << SMS_IMAGEHEIGHT_OFFSET; ++ ++ control = pixel_size_exp << SMS_PS_OFFSET; ++ control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET; ++ control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET; ++ ++ vrfb_hw_context[ctx].physical_ba = paddr; ++ vrfb_hw_context[ctx].size = size; ++ vrfb_hw_context[ctx].control = control; ++ ++ omap2_sms_write_rot_physical_ba(paddr, ctx); ++ omap2_sms_write_rot_size(size, ctx); ++ omap2_sms_write_rot_control(control, ctx); ++ ++ DBG("vrfb offset pixels %d, %d\n", ++ vrfb_width - width, vrfb_height - height); ++ ++ vrfb->xoffset = vrfb_width - width; ++ vrfb->yoffset = vrfb_height - height; ++ vrfb->bytespp = bytespp; ++} ++EXPORT_SYMBOL(omap_vrfb_setup); ++ ++void omap_vrfb_release_ctx(struct vrfb *vrfb) ++{ ++ int rot; ++ int ctx = vrfb->context; ++ ++ if (ctx == 0xff) ++ return; ++ ++ DBG("release ctx %d\n", ctx); ++ ++ mutex_lock(&ctx_lock); ++ ++ BUG_ON(!(ctx_map & (1 << ctx))); ++ ++ clear_bit(ctx, &ctx_map_active); ++ clear_bit(ctx, &ctx_map); ++ ++ for (rot = 0; rot < 4; ++rot) { ++ if (vrfb->paddr[rot]) { ++ release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE); ++ vrfb->paddr[rot] = 0; ++ } ++ } ++ ++ vrfb->context = 0xff; ++ ++ mutex_unlock(&ctx_lock); ++} ++EXPORT_SYMBOL(omap_vrfb_release_ctx); ++ ++int omap_vrfb_request_ctx(struct vrfb *vrfb) ++{ ++ int rot; ++ u32 paddr; ++ u8 ctx; ++ int r; ++ ++ DBG("request ctx\n"); ++ ++ mutex_lock(&ctx_lock); ++ ++ for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx) ++ if ((ctx_map & (1 << ctx)) == 0) ++ break; ++ ++ if (ctx == VRFB_NUM_CTXS) { ++ pr_err("vrfb: no free contexts\n"); ++ r = -EBUSY; ++ goto out; ++ } ++ ++ DBG("found free ctx %d\n", ctx); ++ ++ set_bit(ctx, &ctx_map); ++ WARN_ON(ctx_map_active & (1 << ctx)); ++ set_bit(ctx, &ctx_map_active); ++ ++ memset(vrfb, 0, sizeof(*vrfb)); ++ ++ vrfb->context = ctx; ++ ++ for (rot = 0; rot < 4; ++rot) { ++ paddr = SMS_ROT_VIRT_BASE(ctx, rot); ++ if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) { ++ pr_err("vrfb: failed to reserve VRFB " ++ "area for ctx %d, rotation %d\n", ++ ctx, rot * 90); ++ omap_vrfb_release_ctx(vrfb); ++ r = -ENOMEM; ++ goto out; ++ } ++ ++ vrfb->paddr[rot] = paddr; ++ ++ DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]); ++ } ++ ++ r = 0; ++out: ++ mutex_unlock(&ctx_lock); ++ return r; ++} ++EXPORT_SYMBOL(omap_vrfb_request_ctx); ++ ++void omap_vrfb_suspend_ctx(struct vrfb *vrfb) ++{ ++ DBG("suspend ctx %d\n", vrfb->context); ++ mutex_lock(&ctx_lock); ++ ++ BUG_ON(vrfb->context >= VRFB_NUM_CTXS); ++ BUG_ON(!((1 << vrfb->context) & ctx_map_active)); ++ ++ clear_bit(vrfb->context, &ctx_map_active); ++ mutex_unlock(&ctx_lock); ++} ++EXPORT_SYMBOL(omap_vrfb_suspend_ctx); ++ ++void omap_vrfb_resume_ctx(struct vrfb *vrfb) ++{ ++ DBG("resume ctx %d\n", vrfb->context); ++ mutex_lock(&ctx_lock); ++ ++ BUG_ON(vrfb->context >= VRFB_NUM_CTXS); ++ BUG_ON((1 << vrfb->context) & ctx_map_active); ++ ++ /* ++ * omap_vrfb_restore_context is normally called by the core domain ++ * save / restore logic, but since this VRFB context was suspended ++ * those calls didn't actually restore the context and now we might ++ * have an invalid context. Do an explicit restore here. ++ */ ++ restore_hw_context(vrfb->context); ++ set_bit(vrfb->context, &ctx_map_active); ++ mutex_unlock(&ctx_lock); ++} ++EXPORT_SYMBOL(omap_vrfb_resume_ctx); ++ +diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h +new file mode 100644 +index 0000000..52e0987 +--- /dev/null ++++ b/include/linux/omapfb.h +@@ -0,0 +1,242 @@ ++/* ++ * File: include/linux/omapfb.h ++ * ++ * Framebuffer driver for TI OMAP boards ++ * ++ * Copyright (C) 2004 Nokia Corporation ++ * Author: Imre Deak <imre.deak@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __LINUX_OMAPFB_H__ ++#define __LINUX_OMAPFB_H__ ++ ++#include <linux/fb.h> ++#include <linux/ioctl.h> ++#include <linux/types.h> ++ ++/* IOCTL commands. */ ++ ++#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) ++#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) ++#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) ++#define OMAP_IO(num) _IO('O', num) ++ ++#define OMAPFB_MIRROR OMAP_IOW(31, int) ++#define OMAPFB_SYNC_GFX OMAP_IO(37) ++#define OMAPFB_VSYNC OMAP_IO(38) ++#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) ++#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) ++#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) ++#define OMAPFB_LCD_TEST OMAP_IOW(45, int) ++#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) ++#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) ++#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) ++#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) ++#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) ++#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) ++#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) ++#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) ++#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) ++#define OMAPFB_WAITFORVSYNC OMAP_IO(57) ++#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) ++#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode) ++#define OMAPFB_WAITFORGO OMAP_IO(60) ++#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info) ++ ++#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff ++#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 ++#define OMAPFB_CAPS_PANEL_MASK 0xff000000 ++ ++#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 ++#define OMAPFB_CAPS_TEARSYNC 0x00002000 ++#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 ++#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 ++#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 ++#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 ++#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 ++#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 ++#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 ++ ++/* Values from DSP must map to lower 16-bits */ ++#define OMAPFB_FORMAT_MASK 0x00ff ++#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 ++#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 ++#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 ++#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 ++#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 ++ ++#define OMAPFB_MEMTYPE_SDRAM 0 ++#define OMAPFB_MEMTYPE_SRAM 1 ++#define OMAPFB_MEMTYPE_MAX 1 ++ ++enum omapfb_color_format { ++ OMAPFB_COLOR_RGB565 = 0, ++ OMAPFB_COLOR_YUV422, ++ OMAPFB_COLOR_YUV420, ++ OMAPFB_COLOR_CLUT_8BPP, ++ OMAPFB_COLOR_CLUT_4BPP, ++ OMAPFB_COLOR_CLUT_2BPP, ++ OMAPFB_COLOR_CLUT_1BPP, ++ OMAPFB_COLOR_RGB444, ++ OMAPFB_COLOR_YUY422, ++ ++ OMAPFB_COLOR_ARGB16, ++ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ ++ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ ++ OMAPFB_COLOR_ARGB32, ++ OMAPFB_COLOR_RGBA32, ++ OMAPFB_COLOR_RGBX32, ++}; ++ ++struct omapfb_update_window { ++ __u32 x, y; ++ __u32 width, height; ++ __u32 format; ++ __u32 out_x, out_y; ++ __u32 out_width, out_height; ++ __u32 reserved[8]; ++}; ++ ++struct omapfb_update_window_old { ++ __u32 x, y; ++ __u32 width, height; ++ __u32 format; ++}; ++ ++enum omapfb_plane { ++ OMAPFB_PLANE_GFX = 0, ++ OMAPFB_PLANE_VID1, ++ OMAPFB_PLANE_VID2, ++}; ++ ++enum omapfb_channel_out { ++ OMAPFB_CHANNEL_OUT_LCD = 0, ++ OMAPFB_CHANNEL_OUT_DIGIT, ++}; ++ ++struct omapfb_plane_info { ++ __u32 pos_x; ++ __u32 pos_y; ++ __u8 enabled; ++ __u8 channel_out; ++ __u8 mirror; ++ __u8 reserved1; ++ __u32 out_width; ++ __u32 out_height; ++ __u32 reserved2[12]; ++}; ++ ++struct omapfb_mem_info { ++ __u32 size; ++ __u8 type; ++ __u8 reserved[3]; ++}; ++ ++struct omapfb_caps { ++ __u32 ctrl; ++ __u32 plane_color; ++ __u32 wnd_color; ++}; ++ ++enum omapfb_color_key_type { ++ OMAPFB_COLOR_KEY_DISABLED = 0, ++ OMAPFB_COLOR_KEY_GFX_DST, ++ OMAPFB_COLOR_KEY_VID_SRC, ++}; ++ ++struct omapfb_color_key { ++ __u8 channel_out; ++ __u32 background; ++ __u32 trans_key; ++ __u8 key_type; ++}; ++ ++enum omapfb_update_mode { ++ OMAPFB_UPDATE_DISABLED = 0, ++ OMAPFB_AUTO_UPDATE, ++ OMAPFB_MANUAL_UPDATE ++}; ++ ++struct omapfb_memory_read { ++ __u16 x; ++ __u16 y; ++ __u16 w; ++ __u16 h; ++ size_t buffer_size; ++ void __user *buffer; ++}; ++ ++struct omapfb_ovl_colormode { ++ __u8 overlay_idx; ++ __u8 mode_idx; ++ __u32 bits_per_pixel; ++ __u32 nonstd; ++ struct fb_bitfield red; ++ struct fb_bitfield green; ++ struct fb_bitfield blue; ++ struct fb_bitfield transp; ++}; ++ ++struct omapfb_vram_info { ++ __u32 total; ++ __u32 free; ++ __u32 largest_free_block; ++ __u32 reserved[5]; ++}; ++ ++#ifdef __KERNEL__ ++ ++#include <mach/board.h> ++ ++#ifdef CONFIG_ARCH_OMAP1 ++#define OMAPFB_PLANE_NUM 1 ++#else ++#define OMAPFB_PLANE_NUM 3 ++#endif ++ ++struct omapfb_mem_region { ++ u32 paddr; ++ void __iomem *vaddr; ++ unsigned long size; ++ u8 type; /* OMAPFB_PLANE_MEM_* */ ++ enum omapfb_color_format format;/* OMAPFB_COLOR_* */ ++ unsigned format_used:1; /* Must be set when format is set. ++ * Needed b/c of the badly chosen 0 ++ * base for OMAPFB_COLOR_* values ++ */ ++ unsigned alloc:1; /* allocated by the driver */ ++ unsigned map:1; /* kernel mapped by the driver */ ++}; ++ ++struct omapfb_mem_desc { ++ int region_cnt; ++ struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; ++}; ++ ++struct omapfb_platform_data { ++ struct omap_lcd_config lcd; ++ struct omapfb_mem_desc mem_desc; ++ void *ctrl_platform_data; ++}; ++ ++/* in arch/arm/plat-omap/fb.c */ ++extern void omapfb_set_ctrl_platform_data(void *pdata); ++extern void omapfb_reserve_sdram(void); ++ ++#endif ++ ++#endif /* __OMAPFB_H */ diff --git a/target/linux/omap35xx/patches-2.6.32/002-OMAP.patch b/target/linux/omap35xx/patches-2.6.32/002-OMAP.patch new file mode 100644 index 0000000..925d7a8 --- /dev/null +++ b/target/linux/omap35xx/patches-2.6.32/002-OMAP.patch @@ -0,0 +1,9839 @@ +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 1c4119c..e861e32 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1508,6 +1508,10 @@ source "net/Kconfig" + + source "drivers/Kconfig" + ++if ARCH_OMAP ++source "drivers/cbus/Kconfig" ++endif ++ + source "fs/Kconfig" + + source "arch/arm/Kconfig.debug" +diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig +index 8da75de..264f52b 100644 +--- a/arch/arm/configs/n8x0_defconfig ++++ b/arch/arm/configs/n8x0_defconfig +@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y + CONFIG_ZBOOT_ROM_TEXT=0x10C08000 + CONFIG_ZBOOT_ROM_BSS=0x10200000 + # CONFIG_ZBOOT_ROM is not set +-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" ++CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" + # CONFIG_XIP_KERNEL is not set + # CONFIG_KEXEC is not set + +diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c +index a7ead1b..74720e6 100644 +--- a/arch/arm/mach-omap1/board-fsample.c ++++ b/arch/arm/mach-omap1/board-fsample.c +@@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { + .flags = IORESOURCE_MEM, + }, + [1] = { +- .start = INT_730_MPU_EXT_NIRQ, ++ .start = INT_7XX_MPU_EXT_NIRQ, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +@@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { + + static struct resource kp_resources[] = { + [0] = { +- .start = INT_730_MPUIO_KEYPAD, +- .end = INT_730_MPUIO_KEYPAD, ++ .start = INT_7XX_MPUIO_KEYPAD, ++ .end = INT_7XX_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, + }; +@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) + /* + * Hold GSM Reset until needed + */ +- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); ++ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver +@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) + */ + + /* Flash: CS0 timings setup */ +- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); +- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); ++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); ++ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ +- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); +- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); ++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); ++ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ +- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); ++ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); + } + + MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") +diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c +index 8340669..2f897cf 100644 +--- a/arch/arm/mach-omap1/board-perseus2.c ++++ b/arch/arm/mach-omap1/board-perseus2.c +@@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { + .flags = IORESOURCE_MEM, + }, + [1] = { +- .start = INT_730_MPU_EXT_NIRQ, ++ .start = INT_7XX_MPU_EXT_NIRQ, + .end = 0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +@@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { + + static struct resource kp_resources[] = { + [0] = { +- .start = INT_730_MPUIO_KEYPAD, +- .end = INT_730_MPUIO_KEYPAD, ++ .start = INT_7XX_MPUIO_KEYPAD, ++ .end = INT_7XX_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, + }; +@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) + /* + * Hold GSM Reset until needed + */ +- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); ++ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver +@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) + */ + + /* Flash: CS0 timings setup */ +- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); +- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); ++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); ++ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ +- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); +- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); ++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); ++ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ +- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); ++ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); + } + + MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") +diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c +index 436eed2..5f77b83 100644 +--- a/arch/arm/mach-omap1/clock.c ++++ b/arch/arm/mach-omap1/clock.c +@@ -69,13 +69,13 @@ struct omap_clk { + } + + #define CK_310 (1 << 0) +-#define CK_730 (1 << 1) ++#define CK_7XX (1 << 1) + #define CK_1510 (1 << 2) + #define CK_16XX (1 << 3) + + static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ +- CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), ++ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), +@@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), +- CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), ++ CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), +@@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ +- CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), ++ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), +@@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), +- CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), ++ CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), +@@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) + * Reprogramming the DPLL is tricky, it must be done from SRAM. + * (on 730, bit 13 must always be 1) + */ +- if (cpu_is_omap730()) ++ if (cpu_is_omap7xx()) + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); + else + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); +@@ -783,8 +783,8 @@ int __init omap1_clk_init(void) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; +- if (cpu_is_omap730()) +- cpu_mask |= CK_730; ++ if (cpu_is_omap7xx()) ++ cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + +@@ -800,7 +800,7 @@ int __init omap1_clk_init(void) + crystal_type = info->system_clock_type; + } + +-#if defined(CONFIG_ARCH_OMAP730) ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + ck_ref.rate = 13000000; + #elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) +@@ -847,7 +847,7 @@ int __init omap1_clk_init(void) + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); +- omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); ++ omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + } + #endif +@@ -862,7 +862,7 @@ int __init omap1_clk_init(void) + + #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) + /* Select slicer output as OMAP input clock */ +- omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); ++ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); + #endif + + /* Amstrad Delta wants BCLK high when inactive */ +@@ -873,7 +873,7 @@ int __init omap1_clk_init(void) + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ +- if (cpu_is_omap730()) ++ if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); +diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c +index 7030f92..a27df2c 100644 +--- a/arch/arm/mach-omap1/io.c ++++ b/arch/arm/mach-omap1/io.c +@@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = { + } + }; + +-#ifdef CONFIG_ARCH_OMAP730 +-static struct map_desc omap730_io_desc[] __initdata = { ++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) ++static struct map_desc omap7xx_io_desc[] __initdata = { + { +- .virtual = OMAP730_DSP_BASE, +- .pfn = __phys_to_pfn(OMAP730_DSP_START), +- .length = OMAP730_DSP_SIZE, ++ .virtual = OMAP7XX_DSP_BASE, ++ .pfn = __phys_to_pfn(OMAP7XX_DSP_START), ++ .length = OMAP7XX_DSP_SIZE, + .type = MT_DEVICE + }, { +- .virtual = OMAP730_DSPREG_BASE, +- .pfn = __phys_to_pfn(OMAP730_DSPREG_START), +- .length = OMAP730_DSPREG_SIZE, +- .type = MT_DEVICE +- } +-}; +-#endif +- +-#ifdef CONFIG_ARCH_OMAP850 +-static struct map_desc omap850_io_desc[] __initdata = { +- { +- .virtual = OMAP850_DSP_BASE, +- .pfn = __phys_to_pfn(OMAP850_DSP_START), +- .length = OMAP850_DSP_SIZE, +- .type = MT_DEVICE +- }, { +- .virtual = OMAP850_DSPREG_BASE, +- .pfn = __phys_to_pfn(OMAP850_DSPREG_START), +- .length = OMAP850_DSPREG_SIZE, ++ .virtual = OMAP7XX_DSPREG_BASE, ++ .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), ++ .length = OMAP7XX_DSPREG_SIZE, + .type = MT_DEVICE + } + }; +@@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) + */ + omap_check_revision(); + +-#ifdef CONFIG_ARCH_OMAP730 +- if (cpu_is_omap730()) { +- iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); +- } +-#endif +- +-#ifdef CONFIG_ARCH_OMAP850 +- if (cpu_is_omap850()) { +- iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); ++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) ++ if (cpu_is_omap7xx()) { ++ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); + } + #endif +- + #ifdef CONFIG_ARCH_OMAP15XX + if (cpu_is_omap15xx()) { + iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); +diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c +index de03c84..8f98b58 100644 +--- a/arch/arm/mach-omap1/irq.c ++++ b/arch/arm/mach-omap1/irq.c +@@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) + irq_bank_writel(val, bank, offset); + } + +-#ifdef CONFIG_ARCH_OMAP730 +-static struct omap_irq_bank omap730_irq_banks[] = { +- { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, +- { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, +- { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, +-}; +-#endif +- +-#ifdef CONFIG_ARCH_OMAP850 +-static struct omap_irq_bank omap850_irq_banks[] = { ++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) ++static struct omap_irq_bank omap7xx_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, +@@ -186,16 +178,10 @@ void __init omap_init_irq(void) + { + int i, j; + +-#ifdef CONFIG_ARCH_OMAP730 +- if (cpu_is_omap730()) { +- irq_banks = omap730_irq_banks; +- irq_bank_count = ARRAY_SIZE(omap730_irq_banks); +- } +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- if (cpu_is_omap850()) { +- irq_banks = omap850_irq_banks; +- irq_bank_count = ARRAY_SIZE(omap850_irq_banks); ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ if (cpu_is_omap7xx()) { ++ irq_banks = omap7xx_irq_banks; ++ irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); + } + #endif + #ifdef CONFIG_ARCH_OMAP15XX +@@ -247,10 +233,8 @@ void __init omap_init_irq(void) + + /* Unmask level 2 handler */ + +- if (cpu_is_omap730()) +- omap_unmask_irq(INT_730_IH2_IRQ); +- else if (cpu_is_omap850()) +- omap_unmask_irq(INT_850_IH2_IRQ); ++ if (cpu_is_omap7xx()) ++ omap_unmask_irq(INT_7XX_IH2_IRQ); + else if (cpu_is_omap15xx()) + omap_unmask_irq(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) +diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c +index 505d98c..3a51cb2 100644 +--- a/arch/arm/mach-omap1/mcbsp.c ++++ b/arch/arm/mach-omap1/mcbsp.c +@@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { + .free = omap1_mcbsp_free, + }; + +-#ifdef CONFIG_ARCH_OMAP730 +-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { + { +- .phys_base = OMAP730_MCBSP1_BASE, ++ .phys_base = OMAP7XX_MCBSP1_BASE, + .dma_rx_sync = OMAP_DMA_MCBSP1_RX, + .dma_tx_sync = OMAP_DMA_MCBSP1_TX, +- .rx_irq = INT_730_McBSP1RX, +- .tx_irq = INT_730_McBSP1TX, ++ .rx_irq = INT_7XX_McBSP1RX, ++ .tx_irq = INT_7XX_McBSP1TX, + .ops = &omap1_mcbsp_ops, + }, + { +- .phys_base = OMAP730_MCBSP2_BASE, ++ .phys_base = OMAP7XX_MCBSP2_BASE, + .dma_rx_sync = OMAP_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP_DMA_MCBSP3_TX, +- .rx_irq = INT_730_McBSP2RX, +- .tx_irq = INT_730_McBSP2TX, ++ .rx_irq = INT_7XX_McBSP2RX, ++ .tx_irq = INT_7XX_McBSP2TX, + .ops = &omap1_mcbsp_ops, + }, + }; +-#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) ++#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) + #else +-#define omap730_mcbsp_pdata NULL +-#define OMAP730_MCBSP_PDATA_SZ 0 ++#define omap7xx_mcbsp_pdata NULL ++#define OMAP7XX_MCBSP_PDATA_SZ 0 + #endif + + #ifdef CONFIG_ARCH_OMAP15XX +@@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { + + int __init omap1_mcbsp_init(void) + { +- if (cpu_is_omap730()) +- omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; ++ if (cpu_is_omap7xx()) ++ omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; + if (cpu_is_omap15xx()) + omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; + if (cpu_is_omap16xx()) +@@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void) + if (!mcbsp_ptr) + return -ENOMEM; + +- if (cpu_is_omap730()) +- omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, +- OMAP730_MCBSP_PDATA_SZ); ++ if (cpu_is_omap7xx()) ++ omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, ++ OMAP7XX_MCBSP_PDATA_SZ); + + if (cpu_is_omap15xx()) + omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, +diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c +index 721e0d9..d59899d 100644 +--- a/arch/arm/mach-omap1/mux.c ++++ b/arch/arm/mach-omap1/mux.c +@@ -35,47 +35,28 @@ + + static struct omap_mux_cfg arch_mux_cfg; + +-#ifdef CONFIG_ARCH_OMAP730 +-static struct pin_config __initdata_or_module omap730_pins[] = { +-MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) +-MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) +-MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) +-MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) +-MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) +-MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) +-MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) +-MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) +-MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) +-MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) +- +-MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) +-MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) +-MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++static struct pin_config __initdata_or_module omap7xx_pins[] = { ++MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) ++MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) ++MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) ++MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) ++MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) ++MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) ++MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) ++MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) ++MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) ++MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) ++ ++MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) ++MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) ++MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) + }; +-#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) ++#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) + #else +-#define omap730_pins NULL +-#define OMAP730_PINS_SZ 0 +-#endif /* CONFIG_ARCH_OMAP730 */ +- +-#ifdef CONFIG_ARCH_OMAP850 +-struct pin_config __initdata_or_module omap850_pins[] = { +-MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) +-MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) +-MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) +-MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) +-MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) +-MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) +-MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) +-MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) +-MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) +-MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) +- +-MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) +-MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) +-MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) +-}; +-#endif ++#define omap7xx_pins NULL ++#define OMAP7XX_PINS_SZ 0 ++#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ + + #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) + static struct pin_config __initdata_or_module omap1xxx_pins[] = { +@@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) + printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->pull_name, cfg->pull_reg, pull_orig, pull); + } +- +-#ifdef CONFIG_ARCH_OMAP850 +- omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); +-#endif +- + #endif + + #ifdef CONFIG_OMAP_MUX_ERRORS +@@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) + + int __init omap1_mux_init(void) + { +- if (cpu_is_omap730()) { +- arch_mux_cfg.pins = omap730_pins; +- arch_mux_cfg.size = OMAP730_PINS_SZ; ++ if (cpu_is_omap7xx()) { ++ arch_mux_cfg.pins = omap7xx_pins; ++ arch_mux_cfg.size = OMAP7XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap1_cfg_reg; + } + +diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c +index 5218943..10f4e4a 100644 +--- a/arch/arm/mach-omap1/pm.c ++++ b/arch/arm/mach-omap1/pm.c +@@ -62,7 +62,7 @@ + static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; + static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; + static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; +-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; ++static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; + static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; + static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; + +@@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void) + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. + */ +- if (cpu_is_omap730()) +- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | +- OMAP_IRQ_BIT(INT_730_IH2_IRQ); ++ if (cpu_is_omap7xx()) ++ level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | ++ OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); + else if (cpu_is_omap15xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1510_IH2_IRQ); +@@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void) + + omap_writel(~level1_wake, OMAP_IH1_MIR); + +- if (cpu_is_omap730()) { ++ if (cpu_is_omap7xx()) { + omap_writel(~level2_wake, OMAP_IH2_0_MIR); +- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | +- OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), ++ omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | ++ OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), + OMAP_IH2_1_MIR); + } else if (cpu_is_omap15xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); +@@ -253,15 +253,15 @@ void omap1_pm_suspend(void) + * Save interrupt, MPUI, ARM and UPLD control registers. + */ + +- if (cpu_is_omap730()) { +- MPUI730_SAVE(OMAP_IH1_MIR); +- MPUI730_SAVE(OMAP_IH2_0_MIR); +- MPUI730_SAVE(OMAP_IH2_1_MIR); +- MPUI730_SAVE(MPUI_CTRL); +- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); +- MPUI730_SAVE(MPUI_DSP_API_CONFIG); +- MPUI730_SAVE(EMIFS_CONFIG); +- MPUI730_SAVE(EMIFF_SDRAM_CONFIG); ++ if (cpu_is_omap7xx()) { ++ MPUI7XX_SAVE(OMAP_IH1_MIR); ++ MPUI7XX_SAVE(OMAP_IH2_0_MIR); ++ MPUI7XX_SAVE(OMAP_IH2_1_MIR); ++ MPUI7XX_SAVE(MPUI_CTRL); ++ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); ++ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); ++ MPUI7XX_SAVE(EMIFS_CONFIG); ++ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + + } else if (cpu_is_omap15xx()) { + MPUI1510_SAVE(OMAP_IH1_MIR); +@@ -306,7 +306,7 @@ void omap1_pm_suspend(void) + omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); + + /* shut down dsp_ck */ +- if (!cpu_is_omap730()) ++ if (!cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); + + /* temporarily enabling api_ck to access DSP registers */ +@@ -383,12 +383,12 @@ void omap1_pm_suspend(void) + ULPD_RESTORE(ULPD_CLOCK_CTRL); + ULPD_RESTORE(ULPD_STATUS_REQ); + +- if (cpu_is_omap730()) { +- MPUI730_RESTORE(EMIFS_CONFIG); +- MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); +- MPUI730_RESTORE(OMAP_IH1_MIR); +- MPUI730_RESTORE(OMAP_IH2_0_MIR); +- MPUI730_RESTORE(OMAP_IH2_1_MIR); ++ if (cpu_is_omap7xx()) { ++ MPUI7XX_RESTORE(EMIFS_CONFIG); ++ MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); ++ MPUI7XX_RESTORE(OMAP_IH1_MIR); ++ MPUI7XX_RESTORE(OMAP_IH2_0_MIR); ++ MPUI7XX_RESTORE(OMAP_IH2_1_MIR); + } else if (cpu_is_omap15xx()) { + MPUI1510_RESTORE(MPUI_CTRL); + MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); +@@ -461,13 +461,13 @@ static int omap_pm_read_proc( + ULPD_SAVE(ULPD_DPLL_CTRL); + ULPD_SAVE(ULPD_POWER_CTRL); + +- if (cpu_is_omap730()) { +- MPUI730_SAVE(MPUI_CTRL); +- MPUI730_SAVE(MPUI_DSP_STATUS); +- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); +- MPUI730_SAVE(MPUI_DSP_API_CONFIG); +- MPUI730_SAVE(EMIFF_SDRAM_CONFIG); +- MPUI730_SAVE(EMIFS_CONFIG); ++ if (cpu_is_omap7xx()) { ++ MPUI7XX_SAVE(MPUI_CTRL); ++ MPUI7XX_SAVE(MPUI_DSP_STATUS); ++ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); ++ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); ++ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); ++ MPUI7XX_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap15xx()) { + MPUI1510_SAVE(MPUI_CTRL); + MPUI1510_SAVE(MPUI_DSP_STATUS); +@@ -517,20 +517,20 @@ static int omap_pm_read_proc( + ULPD_SHOW(ULPD_STATUS_REQ), + ULPD_SHOW(ULPD_POWER_CTRL)); + +- if (cpu_is_omap730()) { ++ if (cpu_is_omap7xx()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, +- "MPUI730_CTRL_REG 0x%-8x \n" +- "MPUI730_DSP_STATUS_REG: 0x%-8x \n" +- "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" +- "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" +- "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" +- "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", +- MPUI730_SHOW(MPUI_CTRL), +- MPUI730_SHOW(MPUI_DSP_STATUS), +- MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), +- MPUI730_SHOW(MPUI_DSP_API_CONFIG), +- MPUI730_SHOW(EMIFF_SDRAM_CONFIG), +- MPUI730_SHOW(EMIFS_CONFIG)); ++ "MPUI7XX_CTRL_REG 0x%-8x \n" ++ "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" ++ "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" ++ "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" ++ "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" ++ "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", ++ MPUI7XX_SHOW(MPUI_CTRL), ++ MPUI7XX_SHOW(MPUI_DSP_STATUS), ++ MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), ++ MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), ++ MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), ++ MPUI7XX_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap15xx()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI1510_CTRL_REG 0x%-8x \n" +@@ -668,9 +668,9 @@ static int __init omap_pm_init(void) + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ +- if (cpu_is_omap730()) { +- omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, +- omap730_cpu_suspend_sz); ++ if (cpu_is_omap7xx()) { ++ omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, ++ omap7xx_cpu_suspend_sz); + } else if (cpu_is_omap15xx()) { + omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, + omap1510_cpu_suspend_sz); +@@ -686,8 +686,8 @@ static int __init omap_pm_init(void) + + pm_idle = omap1_pm_idle; + +- if (cpu_is_omap730()) +- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); ++ if (cpu_is_omap7xx()) ++ setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); + else if (cpu_is_omap16xx()) + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + +@@ -700,8 +700,8 @@ static int __init omap_pm_init(void) + omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); + + /* Configure IDLECT3 */ +- if (cpu_is_omap730()) +- omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); ++ if (cpu_is_omap7xx()) ++ omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); + else if (cpu_is_omap16xx()) + omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); + +diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h +index c4f05bd..56a6479 100644 +--- a/arch/arm/mach-omap1/pm.h ++++ b/arch/arm/mach-omap1/pm.h +@@ -98,13 +98,14 @@ + #define OMAP1610_IDLECT3 0xfffece24 + #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 + +-#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 +-#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 +-#define OMAP730_IDLECT3_VAL 0x3f +-#define OMAP730_IDLECT3 0xfffece24 +-#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 ++#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 ++#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 ++#define OMAP7XX_IDLECT3_VAL 0x3f ++#define OMAP7XX_IDLECT3 0xfffece24 ++#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 + + #if !defined(CONFIG_ARCH_OMAP730) && \ ++ !defined(CONFIG_ARCH_OMAP850) && \ + !defined(CONFIG_ARCH_OMAP15XX) && \ + !defined(CONFIG_ARCH_OMAP16XX) + #warning "Power management for this processor not implemented yet" +@@ -122,17 +123,17 @@ extern void allow_idle_sleep(void); + extern void omap1_pm_idle(void); + extern void omap1_pm_suspend(void); + +-extern void omap730_cpu_suspend(unsigned short, unsigned short); ++extern void omap7xx_cpu_suspend(unsigned short, unsigned short); + extern void omap1510_cpu_suspend(unsigned short, unsigned short); + extern void omap1610_cpu_suspend(unsigned short, unsigned short); +-extern void omap730_idle_loop_suspend(void); ++extern void omap7xx_idle_loop_suspend(void); + extern void omap1510_idle_loop_suspend(void); + extern void omap1610_idle_loop_suspend(void); + +-extern unsigned int omap730_cpu_suspend_sz; ++extern unsigned int omap7xx_cpu_suspend_sz; + extern unsigned int omap1510_cpu_suspend_sz; + extern unsigned int omap1610_cpu_suspend_sz; +-extern unsigned int omap730_idle_loop_suspend_sz; ++extern unsigned int omap7xx_idle_loop_suspend_sz; + extern unsigned int omap1510_idle_loop_suspend_sz; + extern unsigned int omap1610_idle_loop_suspend_sz; + +@@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable); + #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) + #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] + +-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) +-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) +-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] ++#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) ++#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) ++#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] + + #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) + #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) +@@ -232,24 +233,24 @@ enum mpui1510_save_state { + #endif + }; + +-enum mpui730_save_state { +- MPUI730_SLEEP_SAVE_START = 0, ++enum mpui7xx_save_state { ++ MPUI7XX_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ +- MPUI730_SLEEP_SAVE_MPUI_CTRL, +- MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, +- MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, +- MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, +- MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, +- MPUI730_SLEEP_SAVE_EMIFS_CONFIG, +- MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, +- MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, +- MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, +-#if defined(CONFIG_ARCH_OMAP730) +- MPUI730_SLEEP_SAVE_SIZE ++ MPUI7XX_SLEEP_SAVE_MPUI_CTRL, ++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, ++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, ++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, ++ MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, ++ MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, ++ MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, ++ MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, ++ MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ MPUI7XX_SLEEP_SAVE_SIZE + #else +- MPUI730_SLEEP_SAVE_SIZE = 0 ++ MPUI7XX_SLEEP_SAVE_SIZE = 0 + #endif + }; + +diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c +index d496e50..332c516 100644 +--- a/arch/arm/mach-omap1/serial.c ++++ b/arch/arm/mach-omap1/serial.c +@@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) + + static struct plat_serial8250_port serial_platform_data[] = { + { +- .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, + .irq = INT_UART1, + .flags = UPF_BOOT_AUTOCONF, +@@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = { + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, + { +- .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, + .irq = INT_UART2, + .flags = UPF_BOOT_AUTOCONF, +@@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = { + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, + { +- .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, + .irq = INT_UART3, + .flags = UPF_BOOT_AUTOCONF, +@@ -90,7 +87,6 @@ static struct plat_serial8250_port serial_platform_data[] = { + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, +- { }, + }; + + static struct platform_device serial_device = { +@@ -110,18 +106,11 @@ void __init omap_serial_init(void) + { + int i; + +- if (cpu_is_omap730()) { ++ if (cpu_is_omap7xx()) { + serial_platform_data[0].regshift = 0; + serial_platform_data[1].regshift = 0; +- serial_platform_data[0].irq = INT_730_UART_MODEM_1; +- serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; +- } +- +- if (cpu_is_omap850()) { +- serial_platform_data[0].regshift = 0; +- serial_platform_data[1].regshift = 0; +- serial_platform_data[0].irq = INT_850_UART_MODEM_1; +- serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; ++ serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; ++ serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; + } + + if (cpu_is_omap15xx()) { +@@ -130,9 +119,17 @@ void __init omap_serial_init(void) + serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; + } + +- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { ++ for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) { + unsigned char reg; + ++ /* Static mapping, never released */ ++ serial_platform_data[i].membase = ++ ioremap(serial_platform_data[i].mapbase, SZ_2K); ++ if (!serial_platform_data[i].membase) { ++ printk(KERN_ERR "Could not ioremap uart%i\n", i); ++ continue; ++ } ++ + switch (i) { + case 0: + uart1_ck = clk_get(NULL, "uart1_ck"); +diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S +index 22e8568..ef771ce 100644 +--- a/arch/arm/mach-omap1/sleep.S ++++ b/arch/arm/mach-omap1/sleep.S +@@ -1,7 +1,7 @@ + /* + * linux/arch/arm/mach-omap1/sleep.S + * +- * Low-level OMAP730/1510/1610 sleep/wakeUp support ++ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support + * + * Initial SA1110 code: + * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> +@@ -57,8 +57,8 @@ + * + */ + +-#if defined(CONFIG_ARCH_OMAP730) +-ENTRY(omap730_cpu_suspend) ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ENTRY(omap7xx_cpu_suspend) + + @ save registers on stack + stmfd sp!, {r0 - r12, lr} +@@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) + + @ turn off clock domains + @ do not disable PERCK (0x04) +- mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff +- orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 ++ mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff ++ orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle +- mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff +- orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 ++ mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff ++ orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ disable instruction cache +@@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) + mov r2, #0 + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + /* +- * omap730_cpu_suspend()'s resume point. ++ * omap7xx_cpu_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack. +@@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) + @ restore regs and return + ldmfd sp!, {r0 - r12, pc} + +-ENTRY(omap730_cpu_suspend_sz) +- .word . - omap730_cpu_suspend +-#endif /* CONFIG_ARCH_OMAP730 */ ++ENTRY(omap7xx_cpu_suspend_sz) ++ .word . - omap7xx_cpu_suspend ++#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ + + #ifdef CONFIG_ARCH_OMAP15XX + ENTRY(omap1510_cpu_suspend) +diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile +index 8cb1677..6b7702f 100644 +--- a/arch/arm/mach-omap2/Makefile ++++ b/arch/arm/mach-omap2/Makefile +@@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o + # Platform specific device init code + obj-y += usb-musb.o + obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o ++obj-y += usb-ehci.o + + onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o + obj-y += $(onenand-m) $(onenand-y) +diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c +index 42217b3..e032a33 100644 +--- a/arch/arm/mach-omap2/board-2430sdp.c ++++ b/arch/arm/mach-omap2/board-2430sdp.c +@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void) + MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_2430sdp_map_io, + .init_irq = omap_2430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index efaf053..81aabac 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -484,6 +484,18 @@ static void enable_board_wakeup_source(void) + omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + } + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .phy_reset = true, ++ .reset_gpio_port[0] = 57, ++ .reset_gpio_port[1] = 61, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap_3430sdp_init(void) + { + omap3430_i2c_init(); +@@ -500,6 +512,7 @@ static void __init omap_3430sdp_init(void) + usb_musb_init(); + board_smc91x_init(); + enable_board_wakeup_source(); ++ usb_ehci_init(&ehci_pdata); + } + + static void __init omap_3430sdp_map_io(void) +@@ -511,7 +524,7 @@ static void __init omap_3430sdp_map_io(void) + MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_3430sdp_map_io, + .init_irq = omap_3430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c +index eb37c40..50a62f2 100644 +--- a/arch/arm/mach-omap2/board-4430sdp.c ++++ b/arch/arm/mach-omap2/board-4430sdp.c +@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { + + static void __init gic_init_irq(void) + { +- gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); +- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); ++ void __iomem *base; ++ ++ /* Static mapping, never released */ ++ base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); ++ BUG_ON(!base); ++ gic_dist_init(0, base, 29); ++ ++ /* Static mapping, never released */ ++ base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256); ++ BUG_ON(!base); ++ gic_cpu_init(0, OMAP44XX_GIC_CPU_BASE); + } + + static void __init omap_4430sdp_init_irq(void) +@@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void) + MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c +index a113228..e8a0e56 100644 +--- a/arch/arm/mach-omap2/board-apollon.c ++++ b/arch/arm/mach-omap2/board-apollon.c +@@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void) + MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_apollon_map_io, + .init_irq = omap_apollon_init_irq, +diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c +index 2e09a1c..1a139c0 100644 +--- a/arch/arm/mach-omap2/board-generic.c ++++ b/arch/arm/mach-omap2/board-generic.c +@@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void) + MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, +diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c +index eaa02d0..86f78f3 100644 +--- a/arch/arm/mach-omap2/board-h4.c ++++ b/arch/arm/mach-omap2/board-h4.c +@@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void) + MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, +diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c +index d110a7f..4ccc01a 100644 +--- a/arch/arm/mach-omap2/board-ldp.c ++++ b/arch/arm/mach-omap2/board-ldp.c +@@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void) + + MACHINE_START(OMAP_LDP, "OMAP LDP board") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, +diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c +index 8341632..2f6ccba 100644 +--- a/arch/arm/mach-omap2/board-n8x0.c ++++ b/arch/arm/mach-omap2/board-n8x0.c +@@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void) + + MACHINE_START(NOKIA_N800, "Nokia N800") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +@@ -131,7 +131,7 @@ MACHINE_END + + MACHINE_START(NOKIA_N810, "Nokia N810") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +@@ -141,7 +141,7 @@ MACHINE_END + + MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 70df6b4..9824073 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -400,6 +400,18 @@ static void __init omap3beagle_flash_init(void) + } + } + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .phy_reset = true, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = 147, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3_beagle_init(void) + { + omap3_beagle_i2c_init(); +@@ -413,6 +425,7 @@ static void __init omap3_beagle_init(void) + gpio_direction_output(170, true); + + usb_musb_init(); ++ usb_ehci_init(&ehci_pdata); + omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ +@@ -429,7 +442,7 @@ static void __init omap3_beagle_map_io(void) + MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_beagle_map_io, + .init_irq = omap3_beagle_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index e4ec0c5..9e0b6e6 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -297,6 +297,18 @@ static struct platform_device *omap3_evm_devices[] __initdata = { + &omap3evm_smc911x_device, + }; + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .phy_reset = true, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = 135, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3_evm_init(void) + { + omap3_evm_i2c_init(); +@@ -312,6 +324,9 @@ static void __init omap3_evm_init(void) + usb_nop_xceiv_register(); + #endif + usb_musb_init(); ++ /* Setup EHCI phy reset padconfig */ ++ omap_cfg_reg(AF4_34XX_GPIO135_OUT); ++ usb_ehci_init(&ehci_pdata); + ads7846_dev_init(); + } + +@@ -324,7 +339,7 @@ static void __init omap3_evm_map_io(void) + MACHINE_START(OMAP3EVM, "OMAP3 EVM") + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_evm_map_io, + .init_irq = omap3_evm_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c +index 7f6bf87..82b2486 100644 +--- a/arch/arm/mach-omap2/board-omap3pandora.c ++++ b/arch/arm/mach-omap2/board-omap3pandora.c +@@ -387,6 +387,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = { + &pandora_keys_gpio, + }; + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .phy_reset = true, ++ .reset_gpio_port[0] = 16, ++ .reset_gpio_port[1] = -EINVAL, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3pandora_init(void) + { + omap3pandora_i2c_init(); +@@ -396,6 +408,7 @@ static void __init omap3pandora_init(void) + spi_register_board_info(omap3pandora_spi_board_info, + ARRAY_SIZE(omap3pandora_spi_board_info)); + omap3pandora_ads7846_init(); ++ usb_ehci_init(&ehci_pdata); + pandora_keys_gpio_init(); + usb_musb_init(); + +@@ -412,7 +425,7 @@ static void __init omap3pandora_map_io(void) + + MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3pandora_map_io, + .init_irq = omap3pandora_init_irq, +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index 9917d2f..d50a3f0 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -384,6 +384,18 @@ static struct platform_device *overo_devices[] __initdata = { + &overo_lcd_device, + }; + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .phy_reset = true, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ ++ + static void __init overo_init(void) + { + overo_i2c_init(); +@@ -391,6 +403,7 @@ static void __init overo_init(void) + omap_serial_init(); + overo_flash_init(); + usb_musb_init(); ++ usb_ehci_init(&ehci_pdata); + overo_ads7846_init(); + overo_init_smsc911x(); + +@@ -433,14 +446,6 @@ static void __init overo_init(void) + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_USBH_CPEN\n"); +- +- if ((gpio_request(OVERO_GPIO_USBH_NRESET, +- "OVERO_GPIO_USBH_NRESET") == 0) && +- (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0)) +- gpio_export(OVERO_GPIO_USBH_NRESET, 0); +- else +- printk(KERN_ERR "could not obtain gpio for " +- "OVERO_GPIO_USBH_NRESET\n"); + } + + static void __init overo_map_io(void) +@@ -451,7 +456,7 @@ static void __init overo_map_io(void) + + MACHINE_START(OVERO, "Gumstix Overo") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = overo_map_io, + .init_irq = overo_init_irq, +diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c +index f9196c3..c973812 100644 +--- a/arch/arm/mach-omap2/board-rx51.c ++++ b/arch/arm/mach-omap2/board-rx51.c +@@ -85,7 +85,7 @@ static void __init rx51_map_io(void) + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") + /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = rx51_map_io, + .init_irq = rx51_init_irq, +diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c +index fd3369d..48bd2af 100644 +--- a/arch/arm/mach-omap2/board-zoom2.c ++++ b/arch/arm/mach-omap2/board-zoom2.c +@@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void) + + MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") + .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, +diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h +index cfd0b72..a2fcfcc 100644 +--- a/arch/arm/mach-omap2/cm.h ++++ b/arch/arm/mach-omap2/cm.h +@@ -17,11 +17,11 @@ + #include "prcm-common.h" + + #define OMAP2420_CM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) + #define OMAP2430_CM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + #define OMAP34XX_CM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + + /* + * Architecture-specific global CM registers +diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c +index a98201c..71d5568 100644 +--- a/arch/arm/mach-omap2/id.c ++++ b/arch/arm/mach-omap2/id.c +@@ -28,6 +28,7 @@ + static struct omap_chip_id omap_chip; + static unsigned int omap_revision; + ++u32 omap3_features; + + unsigned int omap_rev(void) + { +@@ -155,12 +156,37 @@ void __init omap24xx_check_revision(void) + pr_info("\n"); + } + +-void __init omap34xx_check_revision(void) ++#define OMAP3_CHECK_FEATURE(status,feat) \ ++ if (((status & OMAP3_ ##feat## _MASK) \ ++ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \ ++ omap3_features |= OMAP3_HAS_ ##feat; \ ++ } ++ ++void __init omap3_check_features(void) ++{ ++ u32 status; ++ ++ omap3_features = 0; ++ ++ status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS); ++ ++ OMAP3_CHECK_FEATURE(status, L2CACHE); ++ OMAP3_CHECK_FEATURE(status, IVA); ++ OMAP3_CHECK_FEATURE(status, SGX); ++ OMAP3_CHECK_FEATURE(status, NEON); ++ OMAP3_CHECK_FEATURE(status, ISP); ++ ++ /* ++ * TODO: Get additional info (where applicable) ++ * e.g. Size of L2 cache. ++ */ ++} ++ ++void __init omap3_check_revision(void) + { + u32 cpuid, idcode; + u16 hawkeye; + u8 rev; +- char *rev_name = "ES1.0"; + + /* + * We cannot access revision registers on ES1.0. +@@ -170,7 +196,7 @@ void __init omap34xx_check_revision(void) + cpuid = read_cpuid(CPUID_ID); + if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { + omap_revision = OMAP3430_REV_ES1_0; +- goto out; ++ return; + } + + /* +@@ -183,33 +209,111 @@ void __init omap34xx_check_revision(void) + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + +- if (hawkeye == 0xb7ae) { ++ switch (hawkeye) { ++ case 0xb7ae: ++ /* Handle 34xx/35xx devices */ + switch (rev) { +- case 0: ++ case 0: /* Take care of early samples */ ++ case 1: + omap_revision = OMAP3430_REV_ES2_0; +- rev_name = "ES2.0"; + break; + case 2: + omap_revision = OMAP3430_REV_ES2_1; +- rev_name = "ES2.1"; + break; + case 3: + omap_revision = OMAP3430_REV_ES3_0; +- rev_name = "ES3.0"; + break; + case 4: + omap_revision = OMAP3430_REV_ES3_1; +- rev_name = "ES3.1"; + break; + default: + /* Use the latest known revision as default */ + omap_revision = OMAP3430_REV_ES3_1; +- rev_name = "Unknown revision\n"; + } ++ break; ++ case 0xb891: ++ /* Handle 36xx devices */ ++ switch (rev) { ++ case 0: ++ omap_revision = OMAP3630_REV_ES1_0; ++ break; ++ default: ++ /* Use the latest known revision as default */ ++ omap_revision = OMAP3630_REV_ES1_0; ++ } ++ break; ++ default: ++ /* Unknown default to latest silicon rev as default*/ ++ omap_revision = OMAP3630_REV_ES1_0; + } ++} + +-out: +- pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); ++#define OMAP3_SHOW_FEATURE(feat) \ ++ if (omap3_has_ ##feat()) { \ ++ pr_info (" - "#feat" : Y"); \ ++ } else { \ ++ pr_info (" - "#feat" : N"); \ ++ } ++ ++void __init omap3_cpuinfo(void) ++{ ++ u8 rev = GET_OMAP_REVISION(); ++ char cpu_name[16], cpu_rev[16]; ++ ++ /* OMAP3430 and OMAP3530 are assumed to be same. ++ * ++ * OMAP3525, OMAP3515 and OMAP3503 can be detected only based ++ * on available features. Upon detection, update the CPU id ++ * and CPU class bits. ++ */ ++ if (cpu_is_omap3630()) ++ strcpy(cpu_name, "3630"); ++ else if (omap3_has_iva() && omap3_has_sgx()) ++ strcpy(cpu_name, "3430/3530"); ++ else if (omap3_has_sgx()) { ++ omap_revision = OMAP3525_REV(rev); ++ strcpy(cpu_name, "3525"); ++ } ++ else if (omap3_has_iva()) { ++ omap_revision = OMAP3515_REV(rev); ++ strcpy(cpu_name, "3515"); ++ } ++ else { ++ omap_revision = OMAP3503_REV(rev); ++ strcpy(cpu_name, "3503"); ++ } ++ ++ switch (rev) { ++ case OMAP_REVBITS_00: ++ strcpy(cpu_rev, "1.0"); ++ break; ++ case OMAP_REVBITS_10: ++ strcpy(cpu_rev, "2.0"); ++ break; ++ case OMAP_REVBITS_20: ++ strcpy(cpu_rev, "2.1"); ++ break; ++ case OMAP_REVBITS_30: ++ strcpy(cpu_rev, "3.0"); ++ break; ++ case OMAP_REVBITS_40: ++ strcpy(cpu_rev, "3.1"); ++ break; ++ default: ++ /* Use the latest known revision as default */ ++ strcpy(cpu_rev, "3.1"); ++ } ++ ++ /* ++ * Print verbose information ++ */ ++ pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev); ++ ++ OMAP3_SHOW_FEATURE(l2cache); ++ OMAP3_SHOW_FEATURE(iva); ++ OMAP3_SHOW_FEATURE(sgx); ++ OMAP3_SHOW_FEATURE(neon); ++ OMAP3_SHOW_FEATURE(isp); + } + + /* +@@ -223,8 +327,11 @@ void __init omap2_check_revision(void) + */ + if (cpu_is_omap24xx()) + omap24xx_check_revision(); +- else if (cpu_is_omap34xx()) +- omap34xx_check_revision(); ++ else if (cpu_is_omap34xx()) { ++ omap3_check_features(); ++ omap3_check_revision(); ++ omap3_cpuinfo(); ++ } + else if (cpu_is_omap44xx()) { + printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + return; +diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c +index e3a3bad..fc62953 100644 +--- a/arch/arm/mach-omap2/io.c ++++ b/arch/arm/mach-omap2/io.c +@@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { + .type = MT_DEVICE, + }, + { ++ .virtual = OMAP44XX_EMIF1_VIRT, ++ .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), ++ .length = OMAP44XX_EMIF1_SIZE, ++ .type = MT_DEVICE, ++ }, ++ { ++ .virtual = OMAP44XX_EMIF2_VIRT, ++ .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), ++ .length = OMAP44XX_EMIF2_SIZE, ++ .type = MT_DEVICE, ++ }, ++ { ++ .virtual = OMAP44XX_DMM_VIRT, ++ .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), ++ .length = OMAP44XX_DMM_SIZE, ++ .type = MT_DEVICE, ++ }, ++ { + .virtual = L4_PER_44XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), + .length = L4_PER_44XX_SIZE, +diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c +index b828638..1db121f 100644 +--- a/arch/arm/mach-omap2/irq.c ++++ b/arch/arm/mach-omap2/irq.c +@@ -178,12 +178,20 @@ void __init omap_init_irq(void) + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { ++ unsigned long base; + struct omap_irq_bank *bank = irq_banks + i; + + if (cpu_is_omap24xx()) +- bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); ++ base = OMAP24XX_IC_BASE; + else if (cpu_is_omap34xx()) +- bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); ++ base = OMAP34XX_IC_BASE; ++ ++ /* Static mapping, never released */ ++ bank->base_reg = ioremap(base, SZ_4K); ++ if (!bank->base_reg) { ++ printk(KERN_ERR "Could not ioremap irq bank%i\n", i); ++ continue; ++ } + + omap_irq_bank_init_one(bank); + +diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c +index 48ee295..a1b618c 100644 +--- a/arch/arm/mach-omap2/omap-smp.c ++++ b/arch/arm/mach-omap2/omap-smp.c +@@ -26,11 +26,11 @@ + #include <mach/hardware.h> + + /* Registers used for communicating startup information */ +-#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) +-#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) ++static void __iomem *omap4_auxcoreboot_reg0; ++static void __iomem *omap4_auxcoreboot_reg1; + + /* SCU base address */ +-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; ++static void __iomem *scu_base; + + /* + * Use SCU config register to count number of cores +@@ -46,6 +46,8 @@ static DEFINE_SPINLOCK(boot_lock); + + void __cpuinit platform_secondary_init(unsigned int cpu) + { ++ void __iomem *gic_cpu_base; ++ + trace_hardirqs_off(); + + /* +@@ -54,7 +56,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu) + * for us: do so + */ + +- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); ++ /* Static mapping, never released */ ++ gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256); ++ BUG_ON(!gic_cpu_base); ++ gic_cpu_init(0, gic_cpu_base); + + /* + * Synchronise with the boot thread. +@@ -79,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) + * the AuxCoreBoot1 register is updated with cpu state + * A barrier is added to ensure that write buffer is drained + */ +- __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); ++ __raw_writel(cpu, omap4_auxcoreboot_reg1); + smp_wmb(); + + timeout = jiffies + (1 * HZ); +@@ -104,7 +109,7 @@ static void __init wakeup_secondary(void) + * A barrier is added to ensure that write buffer is drained + */ + __raw_writel(virt_to_phys(omap_secondary_startup), \ +- OMAP4_AUXCOREBOOT_REG0); ++ omap4_auxcoreboot_reg0); + smp_wmb(); + + /* +@@ -130,6 +135,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) + { + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); ++ void __iomem *omap4_wkupgen_base; + int i; + + /* sanity check */ +@@ -161,6 +167,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus) + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + ++ /* Never released */ ++ omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); ++ BUG_ON(!omap4_wkupgen_base); ++ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; ++ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x804; ++ ++ /* Never released */ ++ scu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256); ++ BUG_ON(!scu_base); ++ + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the +diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c +index d2e0f1c..8ac8798 100644 +--- a/arch/arm/mach-omap2/omap_hwmod.c ++++ b/arch/arm/mach-omap2/omap_hwmod.c +@@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) + struct omap_hwmod_addr_space *mem; + int i; + int found = 0; ++ void __iomem *va_start; + + if (!oh || oh->slaves_cnt == 0) + return NULL; +@@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) + } + } + +- /* XXX use ioremap() instead? */ +- +- if (found) ++ if (found) { ++ va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); ++ if (!va_start) { ++ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); ++ return NULL; ++ } + pr_debug("omap_hwmod: %s: MPU register target at va %p\n", +- oh->name, OMAP2_IO_ADDRESS(mem->pa_start)); +- else ++ oh->name, va_start); ++ } else { + pr_debug("omap_hwmod: %s: no MPU register target found\n", + oh->name); ++ } + +- return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL; ++ return (found) ? va_start : NULL; + } + + /** +@@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) + pr_debug("omap_hwmod: %s: unregistering\n", oh->name); + + mutex_lock(&omap_hwmod_mutex); ++ iounmap(oh->_rt_va); + list_del(&oh->node); + mutex_unlock(&omap_hwmod_mutex); + +diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c +index 2fc4d6a..deed1dd 100644 +--- a/arch/arm/mach-omap2/pm-debug.c ++++ b/arch/arm/mach-omap2/pm-debug.c +@@ -51,7 +51,8 @@ int omap2_pm_debug; + regs[reg_count++].val = __raw_readl(reg) + #define DUMP_INTC_REG(reg, off) \ + regs[reg_count].name = #reg; \ +- regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off))) ++ regs[reg_count++].val = \ ++ __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) + + static int __init pm_dbg_init(void); + +diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h +index 03c467c..a117f85 100644 +--- a/arch/arm/mach-omap2/prm.h ++++ b/arch/arm/mach-omap2/prm.h +@@ -17,11 +17,11 @@ + #include "prcm-common.h" + + #define OMAP2420_PRM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) + #define OMAP2430_PRM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + #define OMAP34XX_PRM_REGADDR(module, reg) \ +- OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + + /* + * Architecture-specific global PRM registers +diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h +index 0837eda..345183d 100644 +--- a/arch/arm/mach-omap2/sdrc.h ++++ b/arch/arm/mach-omap2/sdrc.h +@@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg) + return __raw_readl(OMAP_SMS_REGADDR(reg)); + } + #else +-#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +-#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +-#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) ++#define OMAP242X_SDRC_REGADDR(reg) \ ++ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) ++#define OMAP243X_SDRC_REGADDR(reg) \ ++ OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) ++#define OMAP34XX_SDRC_REGADDR(reg) \ ++ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) + #endif /* __ASSEMBLER__ */ + + #endif +diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c +index ae21868..7f722a7 100644 +--- a/arch/arm/mach-omap2/serial.c ++++ b/arch/arm/mach-omap2/serial.c +@@ -73,7 +73,6 @@ static LIST_HEAD(uart_list); + + static struct plat_serial8250_port serial_platform_data0[] = { + { +- .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, +@@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = { + + static struct plat_serial8250_port serial_platform_data1[] = { + { +- .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, +@@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = { + + static struct plat_serial8250_port serial_platform_data2[] = { + { +- .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, +@@ -110,7 +107,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { + .uartclk = OMAP24XX_BASE_BAUD * 16, + }, { + #ifdef CONFIG_ARCH_OMAP4 +- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), + .mapbase = OMAP_UART4_BASE, + .irq = 70, + .flags = UPF_BOOT_AUTOCONF, +@@ -126,7 +122,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { + #ifdef CONFIG_ARCH_OMAP4 + static struct plat_serial8250_port serial_platform_data3[] = { + { +- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), + .mapbase = OMAP_UART4_BASE, + .irq = 70, + .flags = UPF_BOOT_AUTOCONF, +@@ -549,7 +544,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} + #define DEV_CREATE_FILE(dev, attr) + #endif /* CONFIG_PM */ + +-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { ++static struct omap_uart_state omap_uart[] = { + { + .pdev = { + .name = "serial8250", +@@ -599,12 +594,22 @@ void __init omap_serial_early_init(void) + * if not needed. + */ + +- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { ++ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { + struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; + ++ /* ++ * Module 4KB + L4 interconnect 4KB ++ * Static mapping, never released ++ */ ++ p->membase = ioremap(p->mapbase, SZ_8K); ++ if (!p->membase) { ++ printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); ++ continue; ++ } ++ + sprintf(name, "uart%d_ick", i+1); + uart->ick = clk_get(NULL, name); + if (IS_ERR(uart->ick)) { +@@ -641,7 +646,7 @@ void __init omap_serial_init(void) + { + int i; + +- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { ++ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { + struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; +diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S +index 9b62208..92e6e1a 100644 +--- a/arch/arm/mach-omap2/sram242x.S ++++ b/arch/arm/mach-omap2/sram242x.S +@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl: + prcm_mask_val: + .word 0xFFFF3FFC + omap242x_sdi_timer_32ksynct_cr: +- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ++ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + ENTRY(omap242x_sram_ddr_init_sz) + .word . - omap242x_sram_ddr_init + +@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl: + ddr_prcm_mask_val: + .word 0xFFFF3FFC + omap242x_srs_timer_32ksynct: +- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ++ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + + ENTRY(omap242x_sram_reprogram_sdrc_sz) + .word . - omap242x_sram_reprogram_sdrc +diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S +index df2cd92..ab49736 100644 +--- a/arch/arm/mach-omap2/sram243x.S ++++ b/arch/arm/mach-omap2/sram243x.S +@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl: + prcm_mask_val: + .word 0xFFFF3FFC + omap243x_sdi_timer_32ksynct_cr: +- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ++ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + ENTRY(omap243x_sram_ddr_init_sz) + .word . - omap243x_sram_ddr_init + +@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl: + ddr_prcm_mask_val: + .word 0xFFFF3FFC + omap243x_srs_timer_32ksynct: +- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ++ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + + ENTRY(omap243x_sram_reprogram_sdrc_sz) + .word . - omap243x_sram_reprogram_sdrc +diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c +index e2338c0..cd72970 100644 +--- a/arch/arm/mach-omap2/timer-gp.c ++++ b/arch/arm/mach-omap2/timer-gp.c +@@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void) + static void __init omap2_gp_timer_init(void) + { + #ifdef CONFIG_LOCAL_TIMERS +- twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); ++ twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); ++ BUG_ON(!twd_base); + #endif + omap_dm_timer_init(); + +diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c +new file mode 100644 +index 0000000..a29c8ca +--- /dev/null ++++ b/arch/arm/mach-omap2/usb-ehci.c +@@ -0,0 +1,192 @@ ++/* ++ * linux/arch/arm/mach-omap2/usb-ehci.c ++ * ++ * This file will contain the board specific details for the ++ * Synopsys EHCI host controller on OMAP3430 ++ * ++ * Copyright (C) 2007 Texas Instruments ++ * Author: Vikram Pandita <vikram.pandita@ti.com> ++ * ++ * Generalization by: ++ * Felipe Balbi <felipe.balbi@nokia.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <asm/io.h> ++#include <mach/mux.h> ++ ++#include <mach/hardware.h> ++#include <mach/irqs.h> ++#include <mach/usb.h> ++ ++#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) ++ ++static struct resource ehci_resources[] = { ++ { ++ .start = OMAP34XX_EHCI_BASE, ++ .end = OMAP34XX_EHCI_BASE + SZ_1K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP34XX_UHH_CONFIG_BASE, ++ .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP34XX_USBTLL_BASE, ++ .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { /* general IRQ */ ++ .start = INT_34XX_EHCI_IRQ, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static u64 ehci_dmamask = ~(u32)0; ++static struct platform_device ehci_device = { ++ .name = "ehci-omap", ++ .id = 0, ++ .dev = { ++ .dma_mask = &ehci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = NULL, ++ }, ++ .num_resources = ARRAY_SIZE(ehci_resources), ++ .resource = ehci_resources, ++}; ++ ++/* MUX settings for EHCI pins */ ++/* ++ * setup_ehci_io_mux - initialize IO pad mux for USBHOST ++ */ ++static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) ++{ ++ switch (port_mode[0]) { ++ case EHCI_HCD_OMAP_MODE_PHY: ++ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); ++ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); ++ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); ++ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); ++ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); ++ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); ++ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); ++ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); ++ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); ++ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); ++ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); ++ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: ++ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); ++ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); ++ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); ++ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); ++ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); ++ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); ++ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); ++ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); ++ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); ++ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); ++ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); ++ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; ++ } ++ ++ switch (port_mode[1]) { ++ case EHCI_HCD_OMAP_MODE_PHY: ++ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); ++ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); ++ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); ++ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); ++ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); ++ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); ++ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); ++ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); ++ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); ++ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); ++ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); ++ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: ++ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); ++ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); ++ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); ++ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); ++ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); ++ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); ++ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); ++ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); ++ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); ++ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); ++ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); ++ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; ++ } ++ ++ switch (port_mode[2]) { ++ case EHCI_HCD_OMAP_MODE_PHY: ++ printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: ++ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); ++ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); ++ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); ++ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); ++ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); ++ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); ++ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); ++ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); ++ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); ++ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); ++ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); ++ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; ++ } ++ ++ return; ++} ++ ++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) ++{ ++ platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); ++ ++ /* Setup Pin IO MUX for EHCI */ ++ if (cpu_is_omap34xx()) ++ setup_ehci_io_mux(pdata->port_mode); ++ ++ if (platform_device_register(&ehci_device) < 0) { ++ printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); ++ return; ++ } ++} ++ ++#else ++ ++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) ++ ++{ ++} ++ ++#endif /* CONFIG_USB_EHCI_HCD */ ++ +diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c +index 3a4768d..1aa58d2 100644 +--- a/arch/arm/plat-omap/common.c ++++ b/arch/arm/plat-omap/common.c +@@ -224,12 +224,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) + + static struct omap_globals omap242x_globals = { + .class = OMAP242X_CLASS, +- .tap = OMAP2_IO_ADDRESS(0x48014000), +- .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), +- .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), +- .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), +- .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), +- .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), ++ .tap = OMAP2_L4_IO_ADDRESS(0x48014000), ++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), ++ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), ++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE), ++ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), ++ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), + }; + + void __init omap2_set_globals_242x(void) +@@ -242,12 +242,12 @@ void __init omap2_set_globals_242x(void) + + static struct omap_globals omap243x_globals = { + .class = OMAP243X_CLASS, +- .tap = OMAP2_IO_ADDRESS(0x4900a000), +- .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), +- .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), +- .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), +- .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), +- .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), ++ .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), ++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), ++ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), ++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), ++ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), ++ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), + }; + + void __init omap2_set_globals_243x(void) +@@ -260,12 +260,12 @@ void __init omap2_set_globals_243x(void) + + static struct omap_globals omap343x_globals = { + .class = OMAP343X_CLASS, +- .tap = OMAP2_IO_ADDRESS(0x4830A000), +- .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), +- .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), +- .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), +- .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), +- .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), ++ .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), ++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), ++ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), ++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), ++ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), ++ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), + }; + + void __init omap2_set_globals_343x(void) +@@ -277,10 +277,10 @@ void __init omap2_set_globals_343x(void) + #if defined(CONFIG_ARCH_OMAP4) + static struct omap_globals omap4_globals = { + .class = OMAP443X_CLASS, +- .tap = OMAP2_IO_ADDRESS(0x4830a000), +- .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), +- .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), +- .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), ++ .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), ++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), ++ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), ++ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + }; + + void __init omap2_set_globals_443x(void) +diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c +index a64b692..d2f5475 100644 +--- a/arch/arm/plat-omap/devices.c ++++ b/arch/arm/plat-omap/devices.c +@@ -113,17 +113,17 @@ static void omap_init_kp(void) + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); + } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { +- omap_cfg_reg(E2_730_KBR0); +- omap_cfg_reg(J7_730_KBR1); +- omap_cfg_reg(E1_730_KBR2); +- omap_cfg_reg(F3_730_KBR3); +- omap_cfg_reg(D2_730_KBR4); +- +- omap_cfg_reg(C2_730_KBC0); +- omap_cfg_reg(D3_730_KBC1); +- omap_cfg_reg(E4_730_KBC2); +- omap_cfg_reg(F4_730_KBC3); +- omap_cfg_reg(E3_730_KBC4); ++ omap_cfg_reg(E2_7XX_KBR0); ++ omap_cfg_reg(J7_7XX_KBR1); ++ omap_cfg_reg(E1_7XX_KBR2); ++ omap_cfg_reg(F3_7XX_KBR3); ++ omap_cfg_reg(D2_7XX_KBR4); ++ ++ omap_cfg_reg(C2_7XX_KBC0); ++ omap_cfg_reg(D3_7XX_KBC1); ++ omap_cfg_reg(E4_7XX_KBC2); ++ omap_cfg_reg(F4_7XX_KBC3); ++ omap_cfg_reg(E3_7XX_KBC4); + } else if (machine_is_omap_h4()) { + omap_cfg_reg(T19_24XX_KBR0); + omap_cfg_reg(R19_24XX_KBR1); +diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c +index 0eb676d..034686d 100644 +--- a/arch/arm/plat-omap/dma.c ++++ b/arch/arm/plat-omap/dma.c +@@ -2347,40 +2347,46 @@ EXPORT_SYMBOL(omap_stop_lcd_dma); + + static int __init omap_init_dma(void) + { ++ unsigned long base; + int ch, r; + + if (cpu_class_is_omap1()) { +- omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); ++ base = OMAP1_DMA_BASE; + dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; + } else if (cpu_is_omap24xx()) { +- omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); ++ base = OMAP24XX_DMA4_BASE; + dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + } else if (cpu_is_omap34xx()) { +- omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); ++ base = OMAP34XX_DMA4_BASE; + dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + } else if (cpu_is_omap44xx()) { +- omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); ++ base = OMAP44XX_DMA4_BASE; + dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; + } else { + pr_err("DMA init failed for unsupported omap\n"); + return -ENODEV; + } + ++ omap_dma_base = ioremap(base, SZ_4K); ++ BUG_ON(!omap_dma_base); ++ + if (cpu_class_is_omap2() && omap_dma_reserve_channels + && (omap_dma_reserve_channels <= dma_lch_count)) + dma_lch_count = omap_dma_reserve_channels; + + dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, + GFP_KERNEL); +- if (!dma_chan) +- return -ENOMEM; ++ if (!dma_chan) { ++ r = -ENOMEM; ++ goto out_unmap; ++ } + + if (cpu_class_is_omap2()) { + dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * + dma_lch_count, GFP_KERNEL); + if (!dma_linked_lch) { +- kfree(dma_chan); +- return -ENOMEM; ++ r = -ENOMEM; ++ goto out_free; + } + } + +@@ -2454,7 +2460,7 @@ static int __init omap_init_dma(void) + for (i = 0; i < ch; i++) + free_irq(omap1_dma_irq[i], + (void *) (i + 1)); +- return r; ++ goto out_free; + } + } + } +@@ -2496,11 +2502,19 @@ static int __init omap_init_dma(void) + "(error %d)\n", r); + for (i = 0; i < dma_chan_count; i++) + free_irq(omap1_dma_irq[i], (void *) (i + 1)); +- return r; ++ goto out_free; + } + } + + return 0; ++ ++out_free: ++ kfree(dma_chan); ++ ++out_unmap: ++ iounmap(omap_dma_base); ++ ++ return r; + } + + arch_initcall(omap_init_dma); +diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c +index d325b54..e4e848e 100644 +--- a/arch/arm/plat-omap/dmtimer.c ++++ b/arch/arm/plat-omap/dmtimer.c +@@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); + int __init omap_dm_timer_init(void) + { + struct omap_dm_timer *timer; +- int i; ++ int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ + + if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) + return -ENODEV; + + spin_lock_init(&dm_timer_lock); + +- if (cpu_class_is_omap1()) ++ if (cpu_class_is_omap1()) { + dm_timers = omap1_dm_timers; +- else if (cpu_is_omap24xx()) { ++ map_size = SZ_2K; ++ } else if (cpu_is_omap24xx()) { + dm_timers = omap2_dm_timers; + dm_source_names = omap2_dm_source_names; + dm_source_clocks = omap2_dm_source_clocks; +@@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void) + + for (i = 0; i < dm_timer_count; i++) { + timer = &dm_timers[i]; +- if (cpu_class_is_omap1()) +- timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base); +- else +- timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base); ++ ++ /* Static mapping, never released */ ++ timer->io_base = ioremap(timer->phys_base, map_size); ++ BUG_ON(!timer->io_base); ++ + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) + if (cpu_class_is_omap2()) { +diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c +index 71ebd7f..14c3506 100644 +--- a/arch/arm/plat-omap/gpio.c ++++ b/arch/arm/plat-omap/gpio.c +@@ -31,7 +31,7 @@ + /* + * OMAP1510 GPIO registers + */ +-#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) ++#define OMAP1510_GPIO_BASE 0xfffce000 + #define OMAP1510_GPIO_DATA_INPUT 0x00 + #define OMAP1510_GPIO_DATA_OUTPUT 0x04 + #define OMAP1510_GPIO_DIR_CONTROL 0x08 +@@ -45,10 +45,10 @@ + /* + * OMAP1610 specific GPIO registers + */ +-#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) +-#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) +-#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) +-#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) ++#define OMAP1610_GPIO1_BASE 0xfffbe400 ++#define OMAP1610_GPIO2_BASE 0xfffbec00 ++#define OMAP1610_GPIO3_BASE 0xfffbb400 ++#define OMAP1610_GPIO4_BASE 0xfffbbc00 + #define OMAP1610_GPIO_REVISION 0x0000 + #define OMAP1610_GPIO_SYSCONFIG 0x0010 + #define OMAP1610_GPIO_SYSSTATUS 0x0014 +@@ -68,52 +68,36 @@ + #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + + /* +- * OMAP730 specific GPIO registers ++ * OMAP7XX specific GPIO registers + */ +-#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +-#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +-#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +-#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +-#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +-#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +-#define OMAP730_GPIO_DATA_INPUT 0x00 +-#define OMAP730_GPIO_DATA_OUTPUT 0x04 +-#define OMAP730_GPIO_DIR_CONTROL 0x08 +-#define OMAP730_GPIO_INT_CONTROL 0x0c +-#define OMAP730_GPIO_INT_MASK 0x10 +-#define OMAP730_GPIO_INT_STATUS 0x14 +- +-/* +- * OMAP850 specific GPIO registers +- */ +-#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +-#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +-#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +-#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +-#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +-#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +-#define OMAP850_GPIO_DATA_INPUT 0x00 +-#define OMAP850_GPIO_DATA_OUTPUT 0x04 +-#define OMAP850_GPIO_DIR_CONTROL 0x08 +-#define OMAP850_GPIO_INT_CONTROL 0x0c +-#define OMAP850_GPIO_INT_MASK 0x10 +-#define OMAP850_GPIO_INT_STATUS 0x14 +- +-#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) ++#define OMAP7XX_GPIO1_BASE 0xfffbc000 ++#define OMAP7XX_GPIO2_BASE 0xfffbc800 ++#define OMAP7XX_GPIO3_BASE 0xfffbd000 ++#define OMAP7XX_GPIO4_BASE 0xfffbd800 ++#define OMAP7XX_GPIO5_BASE 0xfffbe000 ++#define OMAP7XX_GPIO6_BASE 0xfffbe800 ++#define OMAP7XX_GPIO_DATA_INPUT 0x00 ++#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 ++#define OMAP7XX_GPIO_DIR_CONTROL 0x08 ++#define OMAP7XX_GPIO_INT_CONTROL 0x0c ++#define OMAP7XX_GPIO_INT_MASK 0x10 ++#define OMAP7XX_GPIO_INT_STATUS 0x14 ++ ++#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE + + /* + * omap24xx specific GPIO registers + */ +-#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) +-#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) +-#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) +-#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) ++#define OMAP242X_GPIO1_BASE 0x48018000 ++#define OMAP242X_GPIO2_BASE 0x4801a000 ++#define OMAP242X_GPIO3_BASE 0x4801c000 ++#define OMAP242X_GPIO4_BASE 0x4801e000 + +-#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) +-#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) +-#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) +-#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) +-#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) ++#define OMAP243X_GPIO1_BASE 0x4900C000 ++#define OMAP243X_GPIO2_BASE 0x4900E000 ++#define OMAP243X_GPIO3_BASE 0x49010000 ++#define OMAP243X_GPIO4_BASE 0x49012000 ++#define OMAP243X_GPIO5_BASE 0x480B6000 + + #define OMAP24XX_GPIO_REVISION 0x0000 + #define OMAP24XX_GPIO_SYSCONFIG 0x0010 +@@ -170,24 +154,25 @@ + * omap34xx specific GPIO registers + */ + +-#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) +-#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) +-#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) +-#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) +-#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) +-#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) ++#define OMAP34XX_GPIO1_BASE 0x48310000 ++#define OMAP34XX_GPIO2_BASE 0x49050000 ++#define OMAP34XX_GPIO3_BASE 0x49052000 ++#define OMAP34XX_GPIO4_BASE 0x49054000 ++#define OMAP34XX_GPIO5_BASE 0x49056000 ++#define OMAP34XX_GPIO6_BASE 0x49058000 + + /* + * OMAP44XX specific GPIO registers + */ +-#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) +-#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) +-#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) +-#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) +-#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) +-#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) ++#define OMAP44XX_GPIO1_BASE 0x4a310000 ++#define OMAP44XX_GPIO2_BASE 0x48055000 ++#define OMAP44XX_GPIO3_BASE 0x48057000 ++#define OMAP44XX_GPIO4_BASE 0x48059000 ++#define OMAP44XX_GPIO5_BASE 0x4805B000 ++#define OMAP44XX_GPIO6_BASE 0x4805D000 + + struct gpio_bank { ++ unsigned long pbase; + void __iomem *base; + u16 irq; + u16 virtual_irq_start; +@@ -215,96 +200,111 @@ struct gpio_bank { + #define METHOD_MPUIO 0 + #define METHOD_GPIO_1510 1 + #define METHOD_GPIO_1610 2 +-#define METHOD_GPIO_730 3 +-#define METHOD_GPIO_850 4 ++#define METHOD_GPIO_7XX 3 + #define METHOD_GPIO_24XX 5 + + #ifdef CONFIG_ARCH_OMAP16XX + static struct gpio_bank gpio_bank_1610[5] = { +- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, +- { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, +- { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, +- { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, +- { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, ++ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE, ++ METHOD_MPUIO }, ++ { OMAP1610_GPIO1_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_1610 }, ++ { OMAP1610_GPIO2_BASE, 0, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, ++ METHOD_GPIO_1610 }, ++ { OMAP1610_GPIO3_BASE, 0, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, ++ METHOD_GPIO_1610 }, ++ { OMAP1610_GPIO4_BASE, 0, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, ++ METHOD_GPIO_1610 }, + }; + #endif + + #ifdef CONFIG_ARCH_OMAP15XX + static struct gpio_bank gpio_bank_1510[2] = { +- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, +- { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } +-}; +-#endif +- +-#ifdef CONFIG_ARCH_OMAP730 +-static struct gpio_bank gpio_bank_730[7] = { +- { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, +- { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, +- { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, +- { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, +- { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, +- { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, +- { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, ++ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE, ++ METHOD_MPUIO }, ++ { OMAP1510_GPIO_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_1510 } + }; + #endif + +-#ifdef CONFIG_ARCH_OMAP850 +-static struct gpio_bank gpio_bank_850[7] = { +- { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, +- { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, +- { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, +- { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, +- { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, +- { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, +- { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++static struct gpio_bank gpio_bank_7xx[7] = { ++ { OMAP1_MPUIO_VBASE, 0, INT_7XX_MPUIO, IH_MPUIO_BASE, ++ METHOD_MPUIO }, ++ { OMAP7XX_GPIO1_BASE, 0, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_7XX }, ++ { OMAP7XX_GPIO2_BASE, 0, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, ++ METHOD_GPIO_7XX }, ++ { OMAP7XX_GPIO3_BASE, 0, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, ++ METHOD_GPIO_7XX }, ++ { OMAP7XX_GPIO4_BASE, 0, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, ++ METHOD_GPIO_7XX }, ++ { OMAP7XX_GPIO5_BASE, 0, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, ++ METHOD_GPIO_7XX }, ++ { OMAP7XX_GPIO6_BASE, 0, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, ++ METHOD_GPIO_7XX }, + }; + #endif + +- + #ifdef CONFIG_ARCH_OMAP24XX + + static struct gpio_bank gpio_bank_242x[4] = { +- { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, +- { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, +- { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, +- { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, ++ { OMAP242X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_24XX }, ++ { OMAP242X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, ++ METHOD_GPIO_24XX }, ++ { OMAP242X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, ++ METHOD_GPIO_24XX }, ++ { OMAP242X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, ++ METHOD_GPIO_24XX }, + }; + + static struct gpio_bank gpio_bank_243x[5] = { +- { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, +- { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, +- { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, +- { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +- { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, ++ { OMAP243X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_24XX }, ++ { OMAP243X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, ++ METHOD_GPIO_24XX }, ++ { OMAP243X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, ++ METHOD_GPIO_24XX }, ++ { OMAP243X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, ++ METHOD_GPIO_24XX }, ++ { OMAP243X_GPIO5_BASE, 0, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, ++ METHOD_GPIO_24XX }, + }; + + #endif + + #ifdef CONFIG_ARCH_OMAP34XX + static struct gpio_bank gpio_bank_34xx[6] = { +- { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, +- { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, +- { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, +- { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +- { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, +- { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO1_BASE, 0, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, ++ METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO2_BASE, 0, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, ++ METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO3_BASE, 0, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, ++ METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO4_BASE, 0, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, ++ METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO5_BASE, 0, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, ++ METHOD_GPIO_24XX }, ++ { OMAP34XX_GPIO6_BASE, 0, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, ++ METHOD_GPIO_24XX }, + }; + + #endif + + #ifdef CONFIG_ARCH_OMAP4 + static struct gpio_bank gpio_bank_44xx[6] = { +- { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ ++ { OMAP44XX_GPIO1_BASE, 0, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, +- { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ ++ { OMAP44XX_GPIO2_BASE, 0, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, +- { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ ++ { OMAP44XX_GPIO3_BASE, 0, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, +- { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ ++ { OMAP44XX_GPIO4_BASE, 0, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, +- { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ ++ { OMAP44XX_GPIO5_BASE, 0, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, +- { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ ++ { OMAP44XX_GPIO6_BASE, 0, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_24XX }, + }; + +@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio) + + static int check_gpio(int gpio) + { +- if (unlikely(gpio_valid(gpio)) < 0) { ++ if (unlikely(gpio_valid(gpio) < 0)) { + printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); + dump_stack(); + return -1; +@@ -402,14 +402,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) + reg += OMAP1610_GPIO_DIRECTION; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_DIR_CONTROL; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_DIR_CONTROL; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_DIR_CONTROL; + break; + #endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +@@ -469,19 +464,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) + l = 1 << gpio; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_DATA_OUTPUT; +- l = __raw_readl(reg); +- if (enable) +- l |= 1 << gpio; +- else +- l &= ~(1 << gpio); +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_DATA_OUTPUT; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; +@@ -537,14 +522,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) + reg += OMAP1610_GPIO_DATAIN; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_DATA_INPUT; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_DATA_INPUT; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_DATA_INPUT; + break; + #endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +@@ -588,14 +568,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) + reg += OMAP1610_GPIO_DATAOUT; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_DATA_OUTPUT; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_DATA_OUTPUT; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_DATA_OUTPUT; + break; + #endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ +@@ -797,21 +772,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) + __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_INT_CONTROL; +- l = __raw_readl(reg); +- if (trigger & IRQ_TYPE_EDGE_RISING) +- l |= 1 << gpio; +- else if (trigger & IRQ_TYPE_EDGE_FALLING) +- l &= ~(1 << gpio); +- else +- goto bad; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_INT_CONTROL; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; +@@ -897,14 +860,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) + reg += OMAP1610_GPIO_IRQSTATUS1; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_INT_STATUS; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_INT_STATUS; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_INT_STATUS; + break; + #endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +@@ -971,16 +929,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) + mask = 0xffff; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_INT_MASK; +- mask = 0xffffffff; +- inv = 1; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_INT_MASK; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_INT_MASK; + mask = 0xffffffff; + inv = 1; + break; +@@ -1044,19 +995,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab + l = gpio_mask; + break; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_INT_MASK; +- l = __raw_readl(reg); +- if (enable) +- l &= ~(gpio_mask); +- else +- l |= gpio_mask; +- break; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_INT_MASK; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); +@@ -1249,13 +1190,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) + if (bank->method == METHOD_GPIO_1610) + isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- if (bank->method == METHOD_GPIO_730) +- isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- if (bank->method == METHOD_GPIO_850) +- isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ if (bank->method == METHOD_GPIO_7XX) ++ isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; + #endif + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + if (bank->method == METHOD_GPIO_24XX) +@@ -1524,11 +1461,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; +- case METHOD_GPIO_730: +- reg += OMAP730_GPIO_DIR_CONTROL; +- break; +- case METHOD_GPIO_850: +- reg += OMAP850_GPIO_DIR_CONTROL; ++ case METHOD_GPIO_7XX: ++ reg += OMAP7XX_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; +@@ -1607,6 +1541,23 @@ static struct clk * gpio5_fck; + static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; + #endif + ++static void __init omap_gpio_show_rev(void) ++{ ++ u32 rev; ++ ++ if (cpu_is_omap16xx()) ++ rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); ++ else if (cpu_is_omap24xx() || cpu_is_omap34xx()) ++ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); ++ else if (cpu_is_omap44xx()) ++ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); ++ else ++ return; ++ ++ printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", ++ (rev >> 4) & 0x0f, rev & 0x0f); ++} ++ + /* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +@@ -1617,6 +1568,7 @@ static int __init _omap_gpio_init(void) + int i; + int gpio = 0; + struct gpio_bank *bank; ++ int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ + char clk_name[11]; + + initialized = 1; +@@ -1679,77 +1631,45 @@ static int __init _omap_gpio_init(void) + + #ifdef CONFIG_ARCH_OMAP15XX + if (cpu_is_omap15xx()) { +- printk(KERN_INFO "OMAP1510 GPIO hardware\n"); + gpio_bank_count = 2; + gpio_bank = gpio_bank_1510; ++ bank_size = SZ_2K; + } + #endif + #if defined(CONFIG_ARCH_OMAP16XX) + if (cpu_is_omap16xx()) { +- u32 rev; +- + gpio_bank_count = 5; + gpio_bank = gpio_bank_1610; +- rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); +- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", +- (rev >> 4) & 0x0f, rev & 0x0f); ++ bank_size = SZ_2K; + } + #endif +-#ifdef CONFIG_ARCH_OMAP730 +- if (cpu_is_omap730()) { +- printk(KERN_INFO "OMAP730 GPIO hardware\n"); +- gpio_bank_count = 7; +- gpio_bank = gpio_bank_730; +- } +-#endif +-#ifdef CONFIG_ARCH_OMAP850 +- if (cpu_is_omap850()) { +- printk(KERN_INFO "OMAP850 GPIO hardware\n"); ++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++ if (cpu_is_omap7xx()) { + gpio_bank_count = 7; +- gpio_bank = gpio_bank_850; ++ gpio_bank = gpio_bank_7xx; ++ bank_size = SZ_2K; + } + #endif +- + #ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap242x()) { +- int rev; +- + gpio_bank_count = 4; + gpio_bank = gpio_bank_242x; +- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); +- printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", +- (rev >> 4) & 0x0f, rev & 0x0f); + } + if (cpu_is_omap243x()) { +- int rev; +- + gpio_bank_count = 5; + gpio_bank = gpio_bank_243x; +- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); +- printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", +- (rev >> 4) & 0x0f, rev & 0x0f); + } + #endif + #ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx()) { +- int rev; +- + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_34xx; +- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); +- printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", +- (rev >> 4) & 0x0f, rev & 0x0f); + } + #endif + #ifdef CONFIG_ARCH_OMAP4 + if (cpu_is_omap44xx()) { +- int rev; +- + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_44xx; +- rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); +- printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", +- (rev >> 4) & 0x0f, rev & 0x0f); + } + #endif + for (i = 0; i < gpio_bank_count; i++) { +@@ -1757,6 +1677,14 @@ static int __init _omap_gpio_init(void) + + bank = &gpio_bank[i]; + spin_lock_init(&bank->lock); ++ ++ /* Static mapping, never released */ ++ bank->base = ioremap(bank->pbase, bank_size); ++ if (!bank->base) { ++ printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); ++ continue; ++ } ++ + if (bank_is_mpuio(bank)) + __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { +@@ -1768,11 +1696,11 @@ static int __init _omap_gpio_init(void) + __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); + } +- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { +- __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); +- __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); ++ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { ++ __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); ++ __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); + +- gpio_count = 32; /* 730 has 32-bit GPIOs */ ++ gpio_count = 32; /* 7xx has 32-bit GPIOs */ + } + + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ +@@ -1862,6 +1790,8 @@ static int __init _omap_gpio_init(void) + if (cpu_is_omap34xx()) + omap_writel(1 << 0, 0x48306814); + ++ omap_gpio_show_rev(); ++ + return 0; + } + +@@ -2160,8 +2090,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) + + if (bank_is_mpuio(bank)) + gpio = OMAP_MPUIO(0); +- else if (cpu_class_is_omap2() || cpu_is_omap730() || +- cpu_is_omap850()) ++ else if (cpu_class_is_omap2() || cpu_is_omap7xx()) + bankwidth = 32; + + for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { +diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h +index 826d317..fdb6300 100644 +--- a/arch/arm/plat-omap/include/mach/control.h ++++ b/arch/arm/plat-omap/include/mach/control.h +@@ -20,15 +20,18 @@ + + #ifndef __ASSEMBLY__ + #define OMAP242X_CTRL_REGADDR(reg) \ +- OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + #define OMAP243X_CTRL_REGADDR(reg) \ +- OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + #define OMAP343X_CTRL_REGADDR(reg) \ +- OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) ++ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + #else +-#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +-#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +-#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) ++#define OMAP242X_CTRL_REGADDR(reg) \ ++ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) ++#define OMAP243X_CTRL_REGADDR(reg) \ ++ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) ++#define OMAP343X_CTRL_REGADDR(reg) \ ++ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + #endif /* __ASSEMBLY__ */ + + /* +@@ -202,6 +205,40 @@ + #define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) + #define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + ++/* ++ * CONTROL OMAP STATUS register to identify OMAP3 features ++ */ ++#define OMAP3_CONTROL_OMAP_STATUS 0x044c ++ ++#define OMAP3_SGX_SHIFT 13 ++#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT) ++#define FEAT_SGX_FULL 0 ++#define FEAT_SGX_HALF 1 ++#define FEAT_SGX_NONE 2 ++ ++#define OMAP3_IVA_SHIFT 12 ++#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT) ++#define FEAT_IVA 0 ++#define FEAT_IVA_NONE 1 ++ ++#define OMAP3_L2CACHE_SHIFT 10 ++#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT) ++#define FEAT_L2CACHE_NONE 0 ++#define FEAT_L2CACHE_64KB 1 ++#define FEAT_L2CACHE_128KB 2 ++#define FEAT_L2CACHE_256KB 3 ++ ++#define OMAP3_ISP_SHIFT 5 ++#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT) ++#define FEAT_ISP 0 ++#define FEAT_ISP_NONE 1 ++ ++#define OMAP3_NEON_SHIFT 4 ++#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT) ++#define FEAT_NEON 0 ++#define FEAT_NEON_NONE 1 ++ ++ + #ifndef __ASSEMBLY__ + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) +diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h +index f129efb..7cb0556 100644 +--- a/arch/arm/plat-omap/include/mach/cpu.h ++++ b/arch/arm/plat-omap/include/mach/cpu.h +@@ -30,6 +30,8 @@ + #ifndef __ASM_ARCH_OMAP_CPU_H + #define __ASM_ARCH_OMAP_CPU_H + ++#include <linux/bitops.h> ++ + /* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +@@ -57,6 +59,23 @@ struct omap_chip_id { + unsigned int omap_rev(void); + + /* ++ * Define CPU revision bits ++ * ++ * Verbose meaning of the revision bits may be different for a silicon ++ * family. This difference can be handled separately. ++ */ ++#define OMAP_REVBITS_00 0x00 ++#define OMAP_REVBITS_10 0x10 ++#define OMAP_REVBITS_20 0x20 ++#define OMAP_REVBITS_30 0x30 ++#define OMAP_REVBITS_40 0x40 ++ ++/* ++ * Get the CPU revision for OMAP devices ++ */ ++#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) ++ ++/* + * Test if multicore OMAP support is needed + */ + #undef MULTI_OMAP1 +@@ -161,6 +180,7 @@ IS_OMAP_CLASS(34xx, 0x34) + IS_OMAP_SUBCLASS(242x, 0x242) + IS_OMAP_SUBCLASS(243x, 0x243) + IS_OMAP_SUBCLASS(343x, 0x343) ++IS_OMAP_SUBCLASS(363x, 0x363) + + #define cpu_is_omap7xx() 0 + #define cpu_is_omap15xx() 0 +@@ -301,7 +321,12 @@ IS_OMAP_TYPE(3430, 0x3430) + #define cpu_is_omap2422() 0 + #define cpu_is_omap2423() 0 + #define cpu_is_omap2430() 0 ++#define cpu_is_omap3503() 0 ++#define cpu_is_omap3515() 0 ++#define cpu_is_omap3525() 0 ++#define cpu_is_omap3530() 0 + #define cpu_is_omap3430() 0 ++#define cpu_is_omap3630() 0 + + /* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish +@@ -351,7 +376,23 @@ IS_OMAP_TYPE(3430, 0x3430) + + #if defined(CONFIG_ARCH_OMAP34XX) + # undef cpu_is_omap3430 ++# undef cpu_is_omap3503 ++# undef cpu_is_omap3515 ++# undef cpu_is_omap3525 ++# undef cpu_is_omap3530 + # define cpu_is_omap3430() is_omap3430() ++# define cpu_is_omap3503 (cpu_is_omap3430() && \ ++ (!omap3_has_iva()) && \ ++ (!omap3_has_sgx())) ++# define cpu_is_omap3515 (cpu_is_omap3430() && \ ++ (omap3_has_iva()) && \ ++ (!omap3_has_sgx())) ++# define cpu_is_omap3525 (cpu_is_omap3430() && \ ++ (omap3_has_sgx()) && \ ++ (!omap3_has_iva())) ++# define cpu_is_omap3530 (cpu_is_omap3430()) ++# undef cpu_is_omap3630 ++# define cpu_is_omap3630() is_omap363x() + #endif + + # if defined(CONFIG_ARCH_OMAP4) +@@ -382,6 +423,14 @@ IS_OMAP_TYPE(3430, 0x3430) + #define OMAP3430_REV_ES3_0 0x34303034 + #define OMAP3430_REV_ES3_1 0x34304034 + ++#define OMAP3630_REV_ES1_0 0x36300034 ++ ++#define OMAP35XX_CLASS 0x35000034 ++#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) ++#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) ++#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) ++#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) ++ + #define OMAP443X_CLASS 0x44300034 + + /* +@@ -423,4 +472,27 @@ IS_OMAP_TYPE(3430, 0x3430) + int omap_chip_is(struct omap_chip_id oci); + void omap2_check_revision(void); + ++/* ++ * Runtime detection of OMAP3 features ++ */ ++extern u32 omap3_features; ++ ++#define OMAP3_HAS_L2CACHE BIT(0) ++#define OMAP3_HAS_IVA BIT(1) ++#define OMAP3_HAS_SGX BIT(2) ++#define OMAP3_HAS_NEON BIT(3) ++#define OMAP3_HAS_ISP BIT(4) ++ ++#define OMAP3_HAS_FEATURE(feat,flag) \ ++static inline unsigned int omap3_has_ ##feat(void) \ ++{ \ ++ return (omap3_features & OMAP3_HAS_ ##flag); \ ++} \ ++ ++OMAP3_HAS_FEATURE(l2cache, L2CACHE) ++OMAP3_HAS_FEATURE(sgx, SGX) ++OMAP3_HAS_FEATURE(iva, IVA) ++OMAP3_HAS_FEATURE(neon, NEON) ++OMAP3_HAS_FEATURE(isp, ISP) ++ + #endif +diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S +index ac24050..63bb06d 100644 +--- a/arch/arm/plat-omap/include/mach/debug-macro.S ++++ b/arch/arm/plat-omap/include/mach/debug-macro.S +@@ -27,7 +27,7 @@ + + #elif CONFIG_ARCH_OMAP2 + moveq \rx, #0x48000000 @ physical base address +- movne \rx, #0xd8000000 @ virtual base ++ movne \rx, #0xfa000000 @ virtual base + orr \rx, \rx, #0x0006a000 + #ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +@@ -38,7 +38,7 @@ + + #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + moveq \rx, #0x48000000 @ physical base address +- movne \rx, #0xd8000000 @ virtual base ++ movne \rx, #0xfa000000 @ virtual base + orr \rx, \rx, #0x0006a000 + #ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S +index a559299..2aea566 100644 +--- a/arch/arm/plat-omap/include/mach/entry-macro.S ++++ b/arch/arm/plat-omap/include/mach/entry-macro.S +@@ -17,11 +17,11 @@ + + #if defined(CONFIG_ARCH_OMAP1) + +-#if defined(CONFIG_ARCH_OMAP730) && \ ++#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +-#error "FIXME: OMAP730 doesn't support multiple-OMAP" +-#elif defined(CONFIG_ARCH_OMAP730) +-#define INT_IH2_IRQ INT_730_IH2_IRQ ++#error "FIXME: OMAP7XX doesn't support multiple-OMAP" ++#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ++#define INT_IH2_IRQ INT_7XX_IH2_IRQ + #elif defined(CONFIG_ARCH_OMAP15XX) + #define INT_IH2_IRQ INT_1510_IH2_IRQ + #elif defined(CONFIG_ARCH_OMAP16XX) +@@ -68,9 +68,9 @@ + + /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ + #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) +-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE) ++#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) + #elif defined(CONFIG_ARCH_OMAP34XX) +-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE) ++#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) + #endif + #if defined(CONFIG_ARCH_OMAP4) + #include <mach/omap44xx.h> +@@ -104,6 +104,8 @@ + + .endm + #else ++#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) ++ + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: +diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h +index 26c1fbf..99c4241 100644 +--- a/arch/arm/plat-omap/include/mach/hardware.h ++++ b/arch/arm/plat-omap/include/mach/hardware.h +@@ -280,7 +280,7 @@ + * --------------------------------------------------------------------------- + */ + +-#include "omap730.h" ++#include "omap7xx.h" + #include "omap1510.h" + #include "omap16xx.h" + #include "omap24xx.h" +diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h +index 8d32df3..7e5319f 100644 +--- a/arch/arm/plat-omap/include/mach/io.h ++++ b/arch/arm/plat-omap/include/mach/io.h +@@ -63,8 +63,24 @@ + #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ + #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +-#define OMAP2_IO_OFFSET 0x90000000 +-#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */ ++#define OMAP2_L3_IO_OFFSET 0x90000000 ++#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ ++ ++ ++#define OMAP2_L4_IO_OFFSET 0xb2000000 ++#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ ++ ++#define OMAP4_L3_IO_OFFSET 0xb4000000 ++#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ ++ ++#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 ++#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) ++ ++#define OMAP4_GPMC_IO_OFFSET 0xa9000000 ++#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) ++ ++#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ ++#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) + + /* + * ---------------------------------------------------------------------------- +@@ -83,24 +99,27 @@ + */ + + /* We map both L3 and L4 on OMAP2 */ +-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ +-#define L3_24XX_VIRT 0xf8000000 ++#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ ++#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) + #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ +-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ +-#define L4_24XX_VIRT 0xd8000000 ++#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ ++#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ + +-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ +-#define L4_WK_243X_VIRT 0xd9000000 ++#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ ++#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_WK_243X_SIZE SZ_1M +-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ +-#define OMAP243X_GPMC_VIRT 0xFE000000 ++#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE ++#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) ++ /* 0x6e000000 --> 0xfe000000 */ + #define OMAP243X_GPMC_SIZE SZ_1M + #define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE +-#define OMAP243X_SDRC_VIRT 0xFD000000 ++ /* 0x6D000000 --> 0xfd000000 */ ++#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) + #define OMAP243X_SDRC_SIZE SZ_1M + #define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE +-#define OMAP243X_SMS_VIRT 0xFC000000 ++ /* 0x6c000000 --> 0xfc000000 */ ++#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) + #define OMAP243X_SMS_SIZE SZ_1M + + /* DSP */ +@@ -121,12 +140,12 @@ + */ + + /* We map both L3 and L4 on OMAP3 */ +-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ +-#define L3_34XX_VIRT 0xf8000000 ++#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ ++#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) + #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ + +-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ +-#define L4_34XX_VIRT 0xd8000000 ++#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ ++#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + + /* +@@ -134,28 +153,33 @@ + * VPOM3430 was not working for Int controller + */ + +-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ +-#define L4_WK_34XX_VIRT 0xd8300000 ++#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ ++#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_WK_34XX_SIZE SZ_1M + +-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ +-#define L4_PER_34XX_VIRT 0xd9000000 ++#define L4_PER_34XX_PHYS L4_PER_34XX_BASE ++ /* 0x49000000 --> 0xfb000000 */ ++#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_PER_34XX_SIZE SZ_1M + +-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ +-#define L4_EMU_34XX_VIRT 0xe4000000 +-#define L4_EMU_34XX_SIZE SZ_64M ++#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE ++ /* 0x54000000 --> 0xfe800000 */ ++#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) ++#define L4_EMU_34XX_SIZE SZ_8M + +-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ +-#define OMAP34XX_GPMC_VIRT 0xFE000000 ++#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE ++ /* 0x6e000000 --> 0xfe000000 */ ++#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) + #define OMAP34XX_GPMC_SIZE SZ_1M + +-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ +-#define OMAP343X_SMS_VIRT 0xFC000000 ++#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE ++ /* 0x6c000000 --> 0xfc000000 */ ++#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) + #define OMAP343X_SMS_SIZE SZ_1M + +-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ +-#define OMAP343X_SDRC_VIRT 0xFD000000 ++#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE ++ /* 0x6D000000 --> 0xfd000000 */ ++#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) + #define OMAP343X_SDRC_SIZE SZ_1M + + /* DSP */ +@@ -176,32 +200,54 @@ + */ + + /* We map both L3 and L4 on OMAP4 */ +-#define L3_44XX_PHYS L3_44XX_BASE +-#define L3_44XX_VIRT 0xd4000000 ++#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ ++#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) + #define L3_44XX_SIZE SZ_1M + +-#define L4_44XX_PHYS L4_44XX_BASE +-#define L4_44XX_VIRT 0xda000000 ++#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ ++#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_44XX_SIZE SZ_4M + + +-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE +-#define L4_WK_44XX_VIRT 0xda300000 ++#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ ++#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_WK_44XX_SIZE SZ_1M + + #define L4_PER_44XX_PHYS L4_PER_44XX_BASE +-#define L4_PER_44XX_VIRT 0xd8000000 ++ /* 0x48000000 --> 0xfa000000 */ ++#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) + #define L4_PER_44XX_SIZE SZ_4M + ++#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE ++ /* 0x49000000 --> 0xfb000000 */ ++#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) ++#define L4_ABE_44XX_SIZE SZ_1M ++ + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE +-#define L4_EMU_44XX_VIRT 0xe4000000 +-#define L4_EMU_44XX_SIZE SZ_64M ++ /* 0x54000000 --> 0xfe800000 */ ++#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) ++#define L4_EMU_44XX_SIZE SZ_8M + + #define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE +-#define OMAP44XX_GPMC_VIRT 0xe0000000 ++ /* 0x50000000 --> 0xf9000000 */ ++#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) + #define OMAP44XX_GPMC_SIZE SZ_1M + + ++#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE ++ /* 0x4c000000 --> 0xfd100000 */ ++#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) ++#define OMAP44XX_EMIF1_SIZE SZ_1M ++ ++#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE ++ /* 0x4d000000 --> 0xfd200000 */ ++#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) ++#define OMAP44XX_EMIF2_SIZE SZ_1M ++ ++#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE ++ /* 0x4e000000 --> 0xfd300000 */ ++#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) ++#define OMAP44XX_DMM_SIZE SZ_1M + /* + * ---------------------------------------------------------------------------- + * Omap specific register access +diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h +index 28a1650..6a6d028 100644 +--- a/arch/arm/plat-omap/include/mach/irqs.h ++++ b/arch/arm/plat-omap/include/mach/irqs.h +@@ -86,49 +86,26 @@ + #define INT_1610_SSR_FIFO_0 29 + + /* +- * OMAP-730 specific IRQ numbers for interrupt handler 1 ++ * OMAP-7xx specific IRQ numbers for interrupt handler 1 + */ +-#define INT_730_IH2_FIQ 0 +-#define INT_730_IH2_IRQ 1 +-#define INT_730_USB_NON_ISO 2 +-#define INT_730_USB_ISO 3 +-#define INT_730_ICR 4 +-#define INT_730_EAC 5 +-#define INT_730_GPIO_BANK1 6 +-#define INT_730_GPIO_BANK2 7 +-#define INT_730_GPIO_BANK3 8 +-#define INT_730_McBSP2TX 10 +-#define INT_730_McBSP2RX 11 +-#define INT_730_McBSP2RX_OVF 12 +-#define INT_730_LCD_LINE 14 +-#define INT_730_GSM_PROTECT 15 +-#define INT_730_TIMER3 16 +-#define INT_730_GPIO_BANK5 17 +-#define INT_730_GPIO_BANK6 18 +-#define INT_730_SPGIO_WR 29 +- +-/* +- * OMAP-850 specific IRQ numbers for interrupt handler 1 +- */ +-#define INT_850_IH2_FIQ 0 +-#define INT_850_IH2_IRQ 1 +-#define INT_850_USB_NON_ISO 2 +-#define INT_850_USB_ISO 3 +-#define INT_850_ICR 4 +-#define INT_850_EAC 5 +-#define INT_850_GPIO_BANK1 6 +-#define INT_850_GPIO_BANK2 7 +-#define INT_850_GPIO_BANK3 8 +-#define INT_850_McBSP2TX 10 +-#define INT_850_McBSP2RX 11 +-#define INT_850_McBSP2RX_OVF 12 +-#define INT_850_LCD_LINE 14 +-#define INT_850_GSM_PROTECT 15 +-#define INT_850_TIMER3 16 +-#define INT_850_GPIO_BANK5 17 +-#define INT_850_GPIO_BANK6 18 +-#define INT_850_SPGIO_WR 29 +- ++#define INT_7XX_IH2_FIQ 0 ++#define INT_7XX_IH2_IRQ 1 ++#define INT_7XX_USB_NON_ISO 2 ++#define INT_7XX_USB_ISO 3 ++#define INT_7XX_ICR 4 ++#define INT_7XX_EAC 5 ++#define INT_7XX_GPIO_BANK1 6 ++#define INT_7XX_GPIO_BANK2 7 ++#define INT_7XX_GPIO_BANK3 8 ++#define INT_7XX_McBSP2TX 10 ++#define INT_7XX_McBSP2RX 11 ++#define INT_7XX_McBSP2RX_OVF 12 ++#define INT_7XX_LCD_LINE 14 ++#define INT_7XX_GSM_PROTECT 15 ++#define INT_7XX_TIMER3 16 ++#define INT_7XX_GPIO_BANK5 17 ++#define INT_7XX_GPIO_BANK6 18 ++#define INT_7XX_SPGIO_WR 29 + + /* + * IRQ numbers for interrupt handler 2 +@@ -206,120 +183,62 @@ + #define INT_1610_SHA1MD5 (91 + IH2_BASE) + + /* +- * OMAP-730 specific IRQ numbers for interrupt handler 2 +- */ +-#define INT_730_HW_ERRORS (0 + IH2_BASE) +-#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) +-#define INT_730_CFCD (2 + IH2_BASE) +-#define INT_730_CFIREQ (3 + IH2_BASE) +-#define INT_730_I2C (4 + IH2_BASE) +-#define INT_730_PCC (5 + IH2_BASE) +-#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) +-#define INT_730_SPI_100K_1 (7 + IH2_BASE) +-#define INT_730_SYREN_SPI (8 + IH2_BASE) +-#define INT_730_VLYNQ (9 + IH2_BASE) +-#define INT_730_GPIO_BANK4 (10 + IH2_BASE) +-#define INT_730_McBSP1TX (11 + IH2_BASE) +-#define INT_730_McBSP1RX (12 + IH2_BASE) +-#define INT_730_McBSP1RX_OF (13 + IH2_BASE) +-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) +-#define INT_730_UART_MODEM_1 (15 + IH2_BASE) +-#define INT_730_MCSI (16 + IH2_BASE) +-#define INT_730_uWireTX (17 + IH2_BASE) +-#define INT_730_uWireRX (18 + IH2_BASE) +-#define INT_730_SMC_CD (19 + IH2_BASE) +-#define INT_730_SMC_IREQ (20 + IH2_BASE) +-#define INT_730_HDQ_1WIRE (21 + IH2_BASE) +-#define INT_730_TIMER32K (22 + IH2_BASE) +-#define INT_730_MMC_SDIO (23 + IH2_BASE) +-#define INT_730_UPLD (24 + IH2_BASE) +-#define INT_730_USB_HHC_1 (27 + IH2_BASE) +-#define INT_730_USB_HHC_2 (28 + IH2_BASE) +-#define INT_730_USB_GENI (29 + IH2_BASE) +-#define INT_730_USB_OTG (30 + IH2_BASE) +-#define INT_730_CAMERA_IF (31 + IH2_BASE) +-#define INT_730_RNG (32 + IH2_BASE) +-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) +-#define INT_730_DBB_RF_EN (34 + IH2_BASE) +-#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) +-#define INT_730_SHA1_MD5 (36 + IH2_BASE) +-#define INT_730_SPI_100K_2 (37 + IH2_BASE) +-#define INT_730_RNG_IDLE (38 + IH2_BASE) +-#define INT_730_MPUIO (39 + IH2_BASE) +-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) +-#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) +-#define INT_730_LLPC_VSYNC (43 + IH2_BASE) +-#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) +-#define INT_730_DMA_CH6 (53 + IH2_BASE) +-#define INT_730_DMA_CH7 (54 + IH2_BASE) +-#define INT_730_DMA_CH8 (55 + IH2_BASE) +-#define INT_730_DMA_CH9 (56 + IH2_BASE) +-#define INT_730_DMA_CH10 (57 + IH2_BASE) +-#define INT_730_DMA_CH11 (58 + IH2_BASE) +-#define INT_730_DMA_CH12 (59 + IH2_BASE) +-#define INT_730_DMA_CH13 (60 + IH2_BASE) +-#define INT_730_DMA_CH14 (61 + IH2_BASE) +-#define INT_730_DMA_CH15 (62 + IH2_BASE) +-#define INT_730_NAND (63 + IH2_BASE) +- +-/* +- * OMAP-850 specific IRQ numbers for interrupt handler 2 ++ * OMAP-7xx specific IRQ numbers for interrupt handler 2 + */ +-#define INT_850_HW_ERRORS (0 + IH2_BASE) +-#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) +-#define INT_850_CFCD (2 + IH2_BASE) +-#define INT_850_CFIREQ (3 + IH2_BASE) +-#define INT_850_I2C (4 + IH2_BASE) +-#define INT_850_PCC (5 + IH2_BASE) +-#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) +-#define INT_850_SPI_100K_1 (7 + IH2_BASE) +-#define INT_850_SYREN_SPI (8 + IH2_BASE) +-#define INT_850_VLYNQ (9 + IH2_BASE) +-#define INT_850_GPIO_BANK4 (10 + IH2_BASE) +-#define INT_850_McBSP1TX (11 + IH2_BASE) +-#define INT_850_McBSP1RX (12 + IH2_BASE) +-#define INT_850_McBSP1RX_OF (13 + IH2_BASE) +-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) +-#define INT_850_UART_MODEM_1 (15 + IH2_BASE) +-#define INT_850_MCSI (16 + IH2_BASE) +-#define INT_850_uWireTX (17 + IH2_BASE) +-#define INT_850_uWireRX (18 + IH2_BASE) +-#define INT_850_SMC_CD (19 + IH2_BASE) +-#define INT_850_SMC_IREQ (20 + IH2_BASE) +-#define INT_850_HDQ_1WIRE (21 + IH2_BASE) +-#define INT_850_TIMER32K (22 + IH2_BASE) +-#define INT_850_MMC_SDIO (23 + IH2_BASE) +-#define INT_850_UPLD (24 + IH2_BASE) +-#define INT_850_USB_HHC_1 (27 + IH2_BASE) +-#define INT_850_USB_HHC_2 (28 + IH2_BASE) +-#define INT_850_USB_GENI (29 + IH2_BASE) +-#define INT_850_USB_OTG (30 + IH2_BASE) +-#define INT_850_CAMERA_IF (31 + IH2_BASE) +-#define INT_850_RNG (32 + IH2_BASE) +-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) +-#define INT_850_DBB_RF_EN (34 + IH2_BASE) +-#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) +-#define INT_850_SHA1_MD5 (36 + IH2_BASE) +-#define INT_850_SPI_100K_2 (37 + IH2_BASE) +-#define INT_850_RNG_IDLE (38 + IH2_BASE) +-#define INT_850_MPUIO (39 + IH2_BASE) +-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) +-#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) +-#define INT_850_LLPC_VSYNC (43 + IH2_BASE) +-#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) +-#define INT_850_DMA_CH6 (53 + IH2_BASE) +-#define INT_850_DMA_CH7 (54 + IH2_BASE) +-#define INT_850_DMA_CH8 (55 + IH2_BASE) +-#define INT_850_DMA_CH9 (56 + IH2_BASE) +-#define INT_850_DMA_CH10 (57 + IH2_BASE) +-#define INT_850_DMA_CH11 (58 + IH2_BASE) +-#define INT_850_DMA_CH12 (59 + IH2_BASE) +-#define INT_850_DMA_CH13 (60 + IH2_BASE) +-#define INT_850_DMA_CH14 (61 + IH2_BASE) +-#define INT_850_DMA_CH15 (62 + IH2_BASE) +-#define INT_850_NAND (63 + IH2_BASE) ++#define INT_7XX_HW_ERRORS (0 + IH2_BASE) ++#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) ++#define INT_7XX_CFCD (2 + IH2_BASE) ++#define INT_7XX_CFIREQ (3 + IH2_BASE) ++#define INT_7XX_I2C (4 + IH2_BASE) ++#define INT_7XX_PCC (5 + IH2_BASE) ++#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) ++#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) ++#define INT_7XX_SYREN_SPI (8 + IH2_BASE) ++#define INT_7XX_VLYNQ (9 + IH2_BASE) ++#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) ++#define INT_7XX_McBSP1TX (11 + IH2_BASE) ++#define INT_7XX_McBSP1RX (12 + IH2_BASE) ++#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) ++#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) ++#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) ++#define INT_7XX_MCSI (16 + IH2_BASE) ++#define INT_7XX_uWireTX (17 + IH2_BASE) ++#define INT_7XX_uWireRX (18 + IH2_BASE) ++#define INT_7XX_SMC_CD (19 + IH2_BASE) ++#define INT_7XX_SMC_IREQ (20 + IH2_BASE) ++#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) ++#define INT_7XX_TIMER32K (22 + IH2_BASE) ++#define INT_7XX_MMC_SDIO (23 + IH2_BASE) ++#define INT_7XX_UPLD (24 + IH2_BASE) ++#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) ++#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) ++#define INT_7XX_USB_GENI (29 + IH2_BASE) ++#define INT_7XX_USB_OTG (30 + IH2_BASE) ++#define INT_7XX_CAMERA_IF (31 + IH2_BASE) ++#define INT_7XX_RNG (32 + IH2_BASE) ++#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) ++#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) ++#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) ++#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) ++#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) ++#define INT_7XX_RNG_IDLE (38 + IH2_BASE) ++#define INT_7XX_MPUIO (39 + IH2_BASE) ++#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) ++#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) ++#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) ++#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) ++#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) ++#define INT_7XX_DMA_CH6 (53 + IH2_BASE) ++#define INT_7XX_DMA_CH7 (54 + IH2_BASE) ++#define INT_7XX_DMA_CH8 (55 + IH2_BASE) ++#define INT_7XX_DMA_CH9 (56 + IH2_BASE) ++#define INT_7XX_DMA_CH10 (57 + IH2_BASE) ++#define INT_7XX_DMA_CH11 (58 + IH2_BASE) ++#define INT_7XX_DMA_CH12 (59 + IH2_BASE) ++#define INT_7XX_DMA_CH13 (60 + IH2_BASE) ++#define INT_7XX_DMA_CH14 (61 + IH2_BASE) ++#define INT_7XX_DMA_CH15 (62 + IH2_BASE) ++#define INT_7XX_NAND (63 + IH2_BASE) + + #define INT_24XX_SYS_NIRQ 7 + #define INT_24XX_SDMA_IRQ0 12 +diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h +index e0d6eca..7e9cae3 100644 +--- a/arch/arm/plat-omap/include/mach/mcbsp.h ++++ b/arch/arm/plat-omap/include/mach/mcbsp.h +@@ -30,8 +30,8 @@ + #include <mach/hardware.h> + #include <mach/clock.h> + +-#define OMAP730_MCBSP1_BASE 0xfffb1000 +-#define OMAP730_MCBSP2_BASE 0xfffb1800 ++#define OMAP7XX_MCBSP1_BASE 0xfffb1000 ++#define OMAP7XX_MCBSP2_BASE 0xfffb1800 + + #define OMAP1510_MCBSP1_BASE 0xe1011800 + #define OMAP1510_MCBSP2_BASE 0xfffb1000 +@@ -58,7 +58,7 @@ + #define OMAP44XX_MCBSP3_BASE 0x49026000 + #define OMAP44XX_MCBSP4_BASE 0x48074000 + +-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) ++#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + + #define OMAP_MCBSP_REG_DRR2 0x00 + #define OMAP_MCBSP_REG_DRR1 0x02 +diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h +index 0f49d2d..f3c1d8a 100644 +--- a/arch/arm/plat-omap/include/mach/mux.h ++++ b/arch/arm/plat-omap/include/mach/mux.h +@@ -51,23 +51,13 @@ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ +- .mux_reg = OMAP730_IO_CONF_##reg, \ ++#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ ++ .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +-#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ +- .pull_reg = OMAP730_IO_CONF_##reg, \ +- .pull_bit = bit, \ +- .pull_val = status, +- +-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ +- .mux_reg = OMAP850_IO_CONF_##reg, \ +- .mask_offset = mode_offset, \ +- .mask = mode, +- +-#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ +- .pull_reg = OMAP850_IO_CONF_##reg, \ ++#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ ++ .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +@@ -84,21 +74,12 @@ + #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +-#define MUX_REG_730(reg, mode_offset, mode) \ +- .mux_reg = OMAP730_IO_CONF_##reg, \ ++#define MUX_REG_7XX(reg, mode_offset, mode) \ ++ .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +-#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ +- .pull_bit = bit, \ +- .pull_val = status, +- +-#define MUX_REG_850(reg, mode_offset, mode) \ +- .mux_reg = OMAP850_IO_CONF_##reg, \ +- .mask_offset = mode_offset, \ +- .mask = mode, +- +-#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ ++#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +@@ -118,32 +99,21 @@ + + /* + * OMAP730/850 has a slightly different config for the pin mux. +- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and ++ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is is in the same register + * as mux config + */ +-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ ++#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ + { \ + .name = desc, \ + .debug = debug_status, \ +- MUX_REG_730(mux_reg, mode_offset, mode) \ +- PULL_REG_730(mux_reg, pull_bit, pull_status) \ ++ MUX_REG_7XX(mux_reg, mode_offset, mode) \ ++ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ + }, + +-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ +- pull_bit, pull_status, debug_status)\ +-{ \ +- .name = desc, \ +- .debug = debug_status, \ +- MUX_REG_850(mux_reg, mode_offset, mode) \ +- PULL_REG_850(mux_reg, pull_bit, pull_status) \ +- PU_PD_REG(NA, 0) \ +-}, +- +- + #define MUX_CFG_24XX(desc, reg_offset, mode, \ + pull_en, pull_mode, dbg) \ + { \ +@@ -232,45 +202,25 @@ struct pin_config { + + }; + +-enum omap730_index { ++enum omap7xx_index { + /* OMAP 730 keyboard */ +- E2_730_KBR0, +- J7_730_KBR1, +- E1_730_KBR2, +- F3_730_KBR3, +- D2_730_KBR4, +- C2_730_KBC0, +- D3_730_KBC1, +- E4_730_KBC2, +- F4_730_KBC3, +- E3_730_KBC4, +- +- /* USB */ +- AA17_730_USB_DM, +- W16_730_USB_PU_EN, +- W17_730_USB_VBUSI, +-}; +- +-enum omap850_index { +- /* OMAP 850 keyboard */ +- E2_850_KBR0, +- J7_850_KBR1, +- E1_850_KBR2, +- F3_850_KBR3, +- D2_850_KBR4, +- C2_850_KBC0, +- D3_850_KBC1, +- E4_850_KBC2, +- F4_850_KBC3, +- E3_850_KBC4, ++ E2_7XX_KBR0, ++ J7_7XX_KBR1, ++ E1_7XX_KBR2, ++ F3_7XX_KBR3, ++ D2_7XX_KBR4, ++ C2_7XX_KBC0, ++ D3_7XX_KBC1, ++ E4_7XX_KBC2, ++ F4_7XX_KBC3, ++ E3_7XX_KBC4, + + /* USB */ +- AA17_850_USB_DM, +- W16_850_USB_PU_EN, +- W17_850_USB_VBUSI, ++ AA17_7XX_USB_DM, ++ W16_7XX_USB_PU_EN, ++ W17_7XX_USB_VBUSI, + }; + +- + enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, +diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h +index f8d186a..4655707 100644 +--- a/arch/arm/plat-omap/include/mach/omap34xx.h ++++ b/arch/arm/plat-omap/include/mach/omap34xx.h +@@ -74,8 +74,12 @@ + + #define OMAP34XX_IVA_INTC_BASE 0x40000000 + #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) +-#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) + #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) ++#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000) ++#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400) ++#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800) ++#define OMAP34XX_SR1_BASE 0x480C9000 ++#define OMAP34XX_SR2_BASE 0x480CB000 + + #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) + +diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h +index b3ba5ac..3361897 100644 +--- a/arch/arm/plat-omap/include/mach/omap44xx.h ++++ b/arch/arm/plat-omap/include/mach/omap44xx.h +@@ -22,6 +22,9 @@ + #define L4_PER_44XX_BASE 0x48000000 + #define L4_EMU_44XX_BASE 0x54000000 + #define L3_44XX_BASE 0x44000000 ++#define OMAP44XX_EMIF1_BASE 0x4c000000 ++#define OMAP44XX_EMIF2_BASE 0x4d000000 ++#define OMAP44XX_DMM_BASE 0x4e000000 + #define OMAP4430_32KSYNCT_BASE 0x4a304000 + #define OMAP4430_CM_BASE 0x4a004000 + #define OMAP4430_PRM_BASE 0x48306000 +@@ -33,14 +36,9 @@ + #define IRQ_SIR_IRQ 0x0040 + #define OMAP44XX_GIC_DIST_BASE 0x48241000 + #define OMAP44XX_GIC_CPU_BASE 0x48240100 +-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + #define OMAP44XX_SCU_BASE 0x48240000 +-#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE) + #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 +-#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) +-#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 + #define OMAP44XX_WKUPGEN_BASE 0x48281000 +-#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) + + #endif /* __ASM_ARCH_OMAP44XX_H */ + +diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h +new file mode 100644 +index 0000000..53f5241 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/omap7xx.h +@@ -0,0 +1,104 @@ ++/* arch/arm/plat-omap/include/mach/omap7xx.h ++ * ++ * Hardware definitions for TI OMAP7XX processor. ++ * ++ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> ++ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> ++ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __ASM_ARCH_OMAP7XX_H ++#define __ASM_ARCH_OMAP7XX_H ++ ++/* ++ * ---------------------------------------------------------------------------- ++ * Base addresses ++ * ---------------------------------------------------------------------------- ++ */ ++ ++/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ ++ ++#define OMAP7XX_DSP_BASE 0xE0000000 ++#define OMAP7XX_DSP_SIZE 0x50000 ++#define OMAP7XX_DSP_START 0xE0000000 ++ ++#define OMAP7XX_DSPREG_BASE 0xE1000000 ++#define OMAP7XX_DSPREG_SIZE SZ_128K ++#define OMAP7XX_DSPREG_START 0xE1000000 ++ ++/* ++ * ---------------------------------------------------------------------------- ++ * OMAP7XX specific configuration registers ++ * ---------------------------------------------------------------------------- ++ */ ++#define OMAP7XX_CONFIG_BASE 0xfffe1000 ++#define OMAP7XX_IO_CONF_0 0xfffe1070 ++#define OMAP7XX_IO_CONF_1 0xfffe1074 ++#define OMAP7XX_IO_CONF_2 0xfffe1078 ++#define OMAP7XX_IO_CONF_3 0xfffe107c ++#define OMAP7XX_IO_CONF_4 0xfffe1080 ++#define OMAP7XX_IO_CONF_5 0xfffe1084 ++#define OMAP7XX_IO_CONF_6 0xfffe1088 ++#define OMAP7XX_IO_CONF_7 0xfffe108c ++#define OMAP7XX_IO_CONF_8 0xfffe1090 ++#define OMAP7XX_IO_CONF_9 0xfffe1094 ++#define OMAP7XX_IO_CONF_10 0xfffe1098 ++#define OMAP7XX_IO_CONF_11 0xfffe109c ++#define OMAP7XX_IO_CONF_12 0xfffe10a0 ++#define OMAP7XX_IO_CONF_13 0xfffe10a4 ++ ++#define OMAP7XX_MODE_1 0xfffe1010 ++#define OMAP7XX_MODE_2 0xfffe1014 ++ ++/* CSMI specials: in terms of base + offset */ ++#define OMAP7XX_MODE2_OFFSET 0x14 ++ ++/* ++ * ---------------------------------------------------------------------------- ++ * OMAP7XX traffic controller configuration registers ++ * ---------------------------------------------------------------------------- ++ */ ++#define OMAP7XX_FLASH_CFG_0 0xfffecc10 ++#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 ++#define OMAP7XX_FLASH_CFG_1 0xfffecc14 ++#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 ++ ++/* ++ * ---------------------------------------------------------------------------- ++ * OMAP7XX DSP control registers ++ * ---------------------------------------------------------------------------- ++ */ ++#define OMAP7XX_ICR_BASE 0xfffbb800 ++#define OMAP7XX_DSP_M_CTL 0xfffbb804 ++#define OMAP7XX_DSP_MMU_BASE 0xfffed200 ++ ++/* ++ * ---------------------------------------------------------------------------- ++ * OMAP7XX PCC_UPLD configuration registers ++ * ---------------------------------------------------------------------------- ++ */ ++#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) ++#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) ++ ++#endif /* __ASM_ARCH_OMAP7XX_H */ ++ +diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h +index 1c09c78..7b58a5f 100644 +--- a/arch/arm/plat-omap/include/mach/sdrc.h ++++ b/arch/arm/plat-omap/include/mach/sdrc.h +@@ -80,11 +80,11 @@ + */ + + #define OMAP242X_SMS_REGADDR(reg) \ +- (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg) ++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) + #define OMAP243X_SMS_REGADDR(reg) \ +- (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg) ++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) + #define OMAP343X_SMS_REGADDR(reg) \ +- (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg) ++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + + /* SMS register offsets - read/write with sms_{read,write}_reg() */ + +diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h +index e249186..9951345 100644 +--- a/arch/arm/plat-omap/include/mach/serial.h ++++ b/arch/arm/plat-omap/include/mach/serial.h +@@ -20,26 +20,22 @@ + #define OMAP_UART1_BASE 0xfffb0000 + #define OMAP_UART2_BASE 0xfffb0800 + #define OMAP_UART3_BASE 0xfffb9800 +-#define OMAP_MAX_NR_PORTS 3 + #elif defined(CONFIG_ARCH_OMAP2) + /* OMAP2 serial ports */ + #define OMAP_UART1_BASE 0x4806a000 + #define OMAP_UART2_BASE 0x4806c000 + #define OMAP_UART3_BASE 0x4806e000 +-#define OMAP_MAX_NR_PORTS 3 + #elif defined(CONFIG_ARCH_OMAP3) + /* OMAP3 serial ports */ + #define OMAP_UART1_BASE 0x4806a000 + #define OMAP_UART2_BASE 0x4806c000 + #define OMAP_UART3_BASE 0x49020000 +-#define OMAP_MAX_NR_PORTS 3 + #elif defined(CONFIG_ARCH_OMAP4) + /* OMAP4 serial ports */ + #define OMAP_UART1_BASE 0x4806a000 + #define OMAP_UART2_BASE 0x4806c000 + #define OMAP_UART3_BASE 0x48020000 + #define OMAP_UART4_BASE 0x4806e000 +-#define OMAP_MAX_NR_PORTS 4 + #endif + + #define OMAP1510_BASE_BAUD (12000000/16) +diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h +index 0814c5f..ddf7b88 100644 +--- a/arch/arm/plat-omap/include/mach/uncompress.h ++++ b/arch/arm/plat-omap/include/mach/uncompress.h +@@ -25,6 +25,7 @@ unsigned int system_rev; + + #define UART_OMAP_MDR1 0x08 /* mode definition register */ + #define OMAP_ID_730 0x355F ++#define OMAP_ID_850 0x362C + #define ID_MASK 0x7fff + #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) + #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK +@@ -53,7 +54,7 @@ static void putc(int c) + /* MMU is not on, so cpu_is_omapXXXX() won't work here */ + unsigned int omap_id = omap_get_id(); + +- if (omap_id == OMAP_ID_730) ++ if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) + shift = 0; + + if (check_port(uart, shift)) +diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h +index f337e17..a4068a4 100644 +--- a/arch/arm/plat-omap/include/mach/usb.h ++++ b/arch/arm/plat-omap/include/mach/usb.h +@@ -5,6 +5,21 @@ + + #include <mach/board.h> + ++#define OMAP3_HS_USB_PORTS 3 ++enum ehci_hcd_omap_mode { ++ EHCI_HCD_OMAP_MODE_UNKNOWN, ++ EHCI_HCD_OMAP_MODE_PHY, ++ EHCI_HCD_OMAP_MODE_TLL, ++}; ++ ++struct ehci_hcd_omap_platform_data { ++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; ++ unsigned phy_reset:1; ++ ++ /* have to be valid if phy_reset is true and portx is in phy mode */ ++ int reset_gpio_port[OMAP3_HS_USB_PORTS]; ++}; ++ + /*-------------------------------------------------------------------------*/ + + #define OMAP1_OTG_BASE 0xfffb0400 +@@ -29,6 +44,8 @@ + + extern void usb_musb_init(void); + ++extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata); ++ + #endif + + void omap_usb_init(struct omap_usb_config *pdata); +diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h +index b97dfaf..9eebf62 100644 +--- a/arch/arm/plat-omap/include/mach/vmalloc.h ++++ b/arch/arm/plat-omap/include/mach/vmalloc.h +@@ -17,5 +17,5 @@ + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +-#define VMALLOC_END (PAGE_OFFSET + 0x18000000) ++#define VMALLOC_END (PAGE_OFFSET + 0x38000000) + +diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c +index b6defa2..93c1d53 100644 +--- a/arch/arm/plat-omap/io.c ++++ b/arch/arm/plat-omap/io.c +@@ -13,7 +13,7 @@ + #include <linux/io.h> + #include <linux/mm.h> + +-#include <mach/omap730.h> ++#include <mach/omap7xx.h> + #include <mach/omap1510.h> + #include <mach/omap16xx.h> + #include <mach/omap24xx.h> +@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) + if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) + return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); + } +- if (cpu_is_omap730()) { +- if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) +- return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); ++ if (cpu_is_omap7xx()) { ++ if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) ++ return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); + +- if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) +- return XLATE(p, OMAP730_DSPREG_BASE, +- OMAP730_DSPREG_START); ++ if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) ++ return XLATE(p, OMAP7XX_DSPREG_BASE, ++ OMAP7XX_DSPREG_START); + } + if (cpu_is_omap15xx()) { + if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) +@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) + return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); + if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) + return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); ++ if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) ++ return XLATE(p, OMAP44XX_EMIF1_PHYS, \ ++ OMAP44XX_EMIF1_VIRT); ++ if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) ++ return XLATE(p, OMAP44XX_EMIF2_PHYS, \ ++ OMAP44XX_EMIF2_VIRT); ++ if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) ++ return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); + if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) + return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); + if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) +@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa) + if (cpu_class_is_omap1()) + return __raw_readb(OMAP1_IO_ADDRESS(pa)); + else +- return __raw_readb(OMAP2_IO_ADDRESS(pa)); ++ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_readb); + +@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa) + if (cpu_class_is_omap1()) + return __raw_readw(OMAP1_IO_ADDRESS(pa)); + else +- return __raw_readw(OMAP2_IO_ADDRESS(pa)); ++ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_readw); + +@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa) + if (cpu_class_is_omap1()) + return __raw_readl(OMAP1_IO_ADDRESS(pa)); + else +- return __raw_readl(OMAP2_IO_ADDRESS(pa)); ++ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_readl); + +@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa) + if (cpu_class_is_omap1()) + __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); + else +- __raw_writeb(v, OMAP2_IO_ADDRESS(pa)); ++ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_writeb); + +@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa) + if (cpu_class_is_omap1()) + __raw_writew(v, OMAP1_IO_ADDRESS(pa)); + else +- __raw_writew(v, OMAP2_IO_ADDRESS(pa)); ++ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_writew); + +@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa) + if (cpu_class_is_omap1()) + __raw_writel(v, OMAP1_IO_ADDRESS(pa)); + else +- __raw_writel(v, OMAP2_IO_ADDRESS(pa)); ++ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); + } + EXPORT_SYMBOL(omap_writel); +diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c +index 2c409fc..12513f4 100644 +--- a/arch/arm/plat-omap/omap_device.c ++++ b/arch/arm/plat-omap/omap_device.c +@@ -103,21 +103,6 @@ + /* Private functions */ + + /** +- * _read_32ksynct - read the OMAP 32K sync timer +- * +- * Returns the current value of the 32KiHz synchronization counter. +- * XXX this should be generalized to simply read the system clocksource. +- * XXX this should be moved to a separate synctimer32k.c file +- */ +-static u32 _read_32ksynct(void) +-{ +- if (!cpu_class_is_omap2()) +- BUG(); +- +- return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010)); +-} +- +-/** + * _omap_device_activate - increase device readiness + * @od: struct omap_device * + * @ignore_lat: increase to latency target (0) or full readiness (1)? +@@ -133,13 +118,13 @@ static u32 _read_32ksynct(void) + */ + static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) + { +- u32 a, b; ++ struct timespec a, b, c; + + pr_debug("omap_device: %s: activating\n", od->pdev.name); + + while (od->pm_lat_level > 0) { + struct omap_device_pm_latency *odpl; +- int act_lat = 0; ++ unsigned long long act_lat = 0; + + od->pm_lat_level--; + +@@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) + (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) + break; + +- a = _read_32ksynct(); ++ getnstimeofday(&a); + + /* XXX check return code */ + odpl->activate_func(od); + +- b = _read_32ksynct(); ++ getnstimeofday(&b); + +- act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ ++ c = timespec_sub(b, a); ++ act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + + pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " +- "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat); ++ "%llu usec\n", od->pdev.name, od->pm_lat_level, ++ act_lat); + + WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " +- "activate step %d took longer than expected (%d > %d)\n", ++ "activate step %d took longer than expected (%llu > %d)\n", + od->pdev.name, od->pdev.id, od->pm_lat_level, + act_lat, odpl->activate_lat); + +@@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) + */ + static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) + { +- u32 a, b; ++ struct timespec a, b, c; + + pr_debug("omap_device: %s: deactivating\n", od->pdev.name); + + while (od->pm_lat_level < od->pm_lats_cnt) { + struct omap_device_pm_latency *odpl; +- int deact_lat = 0; ++ unsigned long long deact_lat = 0; + + odpl = od->pm_lats + od->pm_lat_level; + +@@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) + od->_dev_wakeup_lat_limit)) + break; + +- a = _read_32ksynct(); ++ getnstimeofday(&a); + + /* XXX check return code */ + odpl->deactivate_func(od); + +- b = _read_32ksynct(); ++ getnstimeofday(&b); + +- deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ ++ c = timespec_sub(b, a); ++ deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + + pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " +- "%d usec\n", od->pdev.name, od->pm_lat_level, ++ "%llu usec\n", od->pdev.name, od->pm_lat_level, + deact_lat); + + WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " +- "deactivate step %d took longer than expected (%d > %d)\n", +- od->pdev.name, od->pdev.id, od->pm_lat_level, +- deact_lat, odpl->deactivate_lat); ++ "deactivate step %d took longer than expected " ++ "(%llu > %d)\n", od->pdev.name, od->pdev.id, ++ od->pm_lat_level, deact_lat, odpl->deactivate_lat); + + od->dev_wakeup_lat += odpl->activate_lat; + +diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c +index 75d1f26..4144f81 100644 +--- a/arch/arm/plat-omap/sram.c ++++ b/arch/arm/plat-omap/sram.c +@@ -41,14 +41,14 @@ + #define OMAP1_SRAM_VA VMALLOC_END + #define OMAP2_SRAM_PA 0x40200000 + #define OMAP2_SRAM_PUB_PA 0x4020f800 +-#define OMAP2_SRAM_VA 0xe3000000 ++#define OMAP2_SRAM_VA 0xfe400000 + #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) + #define OMAP3_SRAM_PA 0x40200000 +-#define OMAP3_SRAM_VA 0xe3000000 ++#define OMAP3_SRAM_VA 0xfe400000 + #define OMAP3_SRAM_PUB_PA 0x40208000 + #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) + #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ +-#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ ++#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ + + #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + #define SRAM_BOOTLOADER_SZ 0x00 +@@ -56,16 +56,16 @@ + #define SRAM_BOOTLOADER_SZ 0x80 + #endif + +-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048) +-#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050) +-#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058) ++#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) ++#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) ++#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848) +-#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850) +-#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858) +-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880) +-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048) +-#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0) ++#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) ++#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) ++#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) ++#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) ++#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) ++#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0) + + #define GP_DEVICE 0x300 + +diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c +index 509f2ed..3c40b85 100644 +--- a/arch/arm/plat-omap/usb.c ++++ b/arch/arm/plat-omap/usb.c +@@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config) + if (config->otg || config->register_host) { + syscon &= ~HST_IDLE_EN; + ohci_device.dev.platform_data = config; +- if (cpu_is_omap730()) +- ohci_resources[1].start = INT_730_USB_HHC_1; ++ if (cpu_is_omap7xx()) ++ ohci_resources[1].start = INT_7XX_USB_HHC_1; + status = platform_device_register(&ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); +@@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config) + if (config->otg) { + syscon &= ~OTG_IDLE_EN; + otg_device.dev.platform_data = config; +- if (cpu_is_omap730()) +- otg_resources[1].start = INT_730_USB_OTG; ++ if (cpu_is_omap7xx()) ++ otg_resources[1].start = INT_7XX_USB_OTG; + status = platform_device_register(&otg_device); + if (status) + pr_debug("can't register OTG device, %d\n", status); +@@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} + + void __init omap_usb_init(struct omap_usb_config *pdata) + { +- if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) ++ if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) + omap_otg_init(pdata); + else if (cpu_is_omap15xx()) + omap_1510_usb_init(pdata); +diff --git a/drivers/Makefile b/drivers/Makefile +index 6ee53c7..086857c 100644 +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -72,7 +72,7 @@ obj-$(CONFIG_GAMEPORT) += input/gameport/ + obj-$(CONFIG_INPUT) += input/ + obj-$(CONFIG_I2O) += message/ + obj-$(CONFIG_RTC_LIB) += rtc/ +-obj-y += i2c/ media/ ++obj-y += i2c/ media/ cbus/ + obj-$(CONFIG_PPS) += pps/ + obj-$(CONFIG_W1) += w1/ + obj-$(CONFIG_POWER_SUPPLY) += power/ +diff --git a/drivers/cbus/Kconfig b/drivers/cbus/Kconfig +new file mode 100644 +index 0000000..25f8039 +--- /dev/null ++++ b/drivers/cbus/Kconfig +@@ -0,0 +1,89 @@ ++# ++# CBUS device configuration ++# ++ ++menu "CBUS support" ++ ++config CBUS ++ depends on ARCH_OMAP ++ bool "CBUS support on OMAP" ++ ---help--- ++ CBUS is a proprietary serial protocol by Nokia. It is mainly ++ used for accessing Energy Management auxiliary chips. ++ ++ If you want CBUS support, you should say Y here. ++ ++config CBUS_TAHVO ++ depends on CBUS ++ bool "Support for Tahvo" ++ ---help--- ++ Tahvo is a mixed signal ASIC with some system features ++ ++ If you want Tahvo support, you should say Y here. ++ ++config CBUS_TAHVO_USER ++ depends on CBUS_TAHVO ++ bool "Support for Tahvo user space functions" ++ ---help--- ++ If you want support for Tahvo's user space read/write etc. functions, ++ you should say Y here. ++ ++config CBUS_TAHVO_USB ++ depends on CBUS_TAHVO && USB ++ tristate "Support for Tahvo USB transceiver" ++ ---help--- ++ If you want Tahvo support for USB transceiver, say Y or M here. ++ ++config CBUS_TAHVO_USB_HOST_BY_DEFAULT ++ depends on CBUS_TAHVO_USB && USB_OTG ++ boolean "Device in USB host mode by default" ++ ---help--- ++ Say Y here, if you want the device to enter USB host mode ++ by default on bootup. ++ ++config CBUS_RETU ++ depends on CBUS ++ bool "Support for Retu" ++ ---help--- ++ Retu is a mixed signal ASIC with some system features ++ ++ If you want Retu support, you should say Y here. ++ ++config CBUS_RETU_USER ++ depends on CBUS_RETU ++ bool "Support for Retu user space functions" ++ ---help--- ++ If you want support for Retu's user space read/write etc. functions, ++ you should say Y here. ++ ++config CBUS_RETU_POWERBUTTON ++ depends on CBUS_RETU ++ bool "Support for Retu power button" ++ ---help--- ++ The power button on Nokia 770 is connected to the Retu ASIC. ++ ++ If you want support for the Retu power button, you should say Y here. ++ ++config CBUS_RETU_RTC ++ depends on CBUS_RETU && SYSFS ++ tristate "Support for Retu pseudo-RTC" ++ ---help--- ++ Say Y here if you want support for the device that alleges to be an ++ RTC in Retu. This will expose a sysfs interface for it. ++ ++config CBUS_RETU_WDT ++ depends on CBUS_RETU && SYSFS ++ tristate "Support for Retu watchdog timer" ++ ---help--- ++ Say Y here if you want support for the watchdog in Retu. This will ++ expose a sysfs interface to grok it. ++ ++config CBUS_RETU_HEADSET ++ depends on CBUS_RETU && SYSFS ++ tristate "Support for headset detection with Retu/Vilma" ++ ---help--- ++ Say Y here if you want support detecting a headset that's connected ++ to Retu/Vilma. Detection state and events are exposed through ++ sysfs. ++ ++endmenu +diff --git a/drivers/cbus/Makefile b/drivers/cbus/Makefile +new file mode 100644 +index 0000000..347c2a4 +--- /dev/null ++++ b/drivers/cbus/Makefile +@@ -0,0 +1,14 @@ ++# ++# Makefile for CBUS. ++# ++ ++obj-$(CONFIG_CBUS) += cbus.o ++obj-$(CONFIG_CBUS_TAHVO) += tahvo.o ++obj-$(CONFIG_CBUS_RETU) += retu.o ++obj-$(CONFIG_CBUS_TAHVO_USB) += tahvo-usb.o ++obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o ++obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o ++obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o ++obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o ++obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o ++obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o +diff --git a/drivers/cbus/cbus.c b/drivers/cbus/cbus.c +new file mode 100644 +index 0000000..774acce +--- /dev/null ++++ b/drivers/cbus/cbus.c +@@ -0,0 +1,293 @@ ++/* ++ * drivers/cbus/cbus.c ++ * ++ * Support functions for CBUS serial protocol ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>, ++ * David Weinehall <david.weinehall@nokia.com>, and ++ * Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/device.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/spinlock.h> ++#include <linux/gpio.h> ++ ++#include <mach/board.h> ++#include <mach/board-nokia.h> ++ ++#include <asm/io.h> ++ ++#include "cbus.h" ++ ++struct cbus_host *cbus_host = NULL; ++ ++#ifdef CONFIG_ARCH_OMAP1 ++/* We use our own MPUIO functions to get closer to 1MHz bus speed */ ++ ++static inline void cbus_set_gpio_direction(u32 base, int mpuio, int is_input) ++{ ++ u16 w; ++ ++ mpuio &= 0x0f; ++ w = __raw_readw(base + OMAP_MPUIO_IO_CNTL); ++ if (is_input) ++ w |= 1 << mpuio; ++ else ++ w &= ~(1 << mpuio); ++ __raw_writew(w, base + OMAP_MPUIO_IO_CNTL); ++ ++} ++ ++static inline void cbus_set_gpio_dataout(u32 base, int mpuio, int enable) ++{ ++ u16 w; ++ ++ mpuio &= 0x0f; ++ w = __raw_readw(base + OMAP_MPUIO_OUTPUT); ++ if (enable) ++ w |= 1 << mpuio; ++ else ++ w &= ~(1 << mpuio); ++ __raw_writew(w, base + OMAP_MPUIO_OUTPUT); ++} ++ ++static inline int cbus_get_gpio_datain(u32 base, int mpuio) ++{ ++ mpuio &= 0x0f; ++ ++ return (__raw_readw(base + OMAP_MPUIO_INPUT_LATCH) & (1 << mpuio)) != 0; ++} ++ ++static void cbus_send_bit(struct cbus_host *host, u32 base, int bit, ++ int set_to_input) ++{ ++ cbus_set_gpio_dataout(base, host->dat_gpio, bit ? 1 : 0); ++ cbus_set_gpio_dataout(base, host->clk_gpio, 1); ++ ++ /* The data bit is read on the rising edge of CLK */ ++ if (set_to_input) ++ cbus_set_gpio_direction(base, host->dat_gpio, 1); ++ ++ cbus_set_gpio_dataout(base, host->clk_gpio, 0); ++} ++ ++static u8 cbus_receive_bit(struct cbus_host *host, u32 base) ++{ ++ u8 ret; ++ ++ cbus_set_gpio_dataout(base, host->clk_gpio, 1); ++ ret = cbus_get_gpio_datain(base, host->dat_gpio); ++ cbus_set_gpio_dataout(base, host->clk_gpio, 0); ++ ++ return ret; ++} ++ ++#define cbus_output(base, gpio, val) cbus_set_gpio_direction(base, gpio, 0) ++ ++#else ++ ++#define cbus_output(base, gpio, val) gpio_direction_output(gpio, val) ++#define cbus_set_gpio_dataout(base, gpio, enable) gpio_set_value(gpio, enable) ++#define cbus_get_gpio_datain(base, int, gpio) gpio_get_value(gpio) ++ ++static void _cbus_send_bit(struct cbus_host *host, int bit, int set_to_input) ++{ ++ gpio_set_value(host->dat_gpio, bit ? 1 : 0); ++ gpio_set_value(host->clk_gpio, 1); ++ ++ /* The data bit is read on the rising edge of CLK */ ++ if (set_to_input) ++ gpio_direction_input(host->dat_gpio); ++ ++ gpio_set_value(host->clk_gpio, 0); ++} ++ ++static u8 _cbus_receive_bit(struct cbus_host *host) ++{ ++ u8 ret; ++ ++ gpio_set_value(host->clk_gpio, 1); ++ ret = gpio_get_value(host->dat_gpio); ++ gpio_set_value(host->clk_gpio, 0); ++ ++ return ret; ++} ++ ++#define cbus_send_bit(host, base, bit, set_to_input) _cbus_send_bit(host, bit, set_to_input) ++#define cbus_receive_bit(host, base) _cbus_receive_bit(host) ++ ++#endif ++ ++static int cbus_transfer(struct cbus_host *host, int dev, int reg, int data) ++{ ++ int i; ++ int is_read = 0; ++ unsigned long flags; ++ u32 base; ++ ++#ifdef CONFIG_ARCH_OMAP1 ++ base = OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE); ++#else ++ base = 0; ++#endif ++ ++ if (data < 0) ++ is_read = 1; ++ ++ /* We don't want interrupts disturbing our transfer */ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ /* Reset state and start of transfer, SEL stays down during transfer */ ++ cbus_set_gpio_dataout(base, host->sel_gpio, 0); ++ ++ /* Set the DAT pin to output */ ++ cbus_output(base, host->dat_gpio, 1); ++ ++ /* Send the device address */ ++ for (i = 3; i > 0; i--) ++ cbus_send_bit(host, base, dev & (1 << (i - 1)), 0); ++ ++ /* Send the rw flag */ ++ cbus_send_bit(host, base, is_read, 0); ++ ++ /* Send the register address */ ++ for (i = 5; i > 0; i--) { ++ int set_to_input = 0; ++ ++ if (is_read && i == 1) ++ set_to_input = 1; ++ ++ cbus_send_bit(host, base, reg & (1 << (i - 1)), set_to_input); ++ } ++ ++ if (!is_read) { ++ for (i = 16; i > 0; i--) ++ cbus_send_bit(host, base, data & (1 << (i - 1)), 0); ++ } else { ++ cbus_set_gpio_dataout(base, host->clk_gpio, 1); ++ data = 0; ++ ++ for (i = 16; i > 0; i--) { ++ u8 bit = cbus_receive_bit(host, base); ++ ++ if (bit) ++ data |= 1 << (i - 1); ++ } ++ } ++ ++ /* Indicate end of transfer, SEL goes up until next transfer */ ++ cbus_set_gpio_dataout(base, host->sel_gpio, 1); ++ cbus_set_gpio_dataout(base, host->clk_gpio, 1); ++ cbus_set_gpio_dataout(base, host->clk_gpio, 0); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ return is_read ? data : 0; ++} ++ ++/* ++ * Read a given register from the device ++ */ ++int cbus_read_reg(struct cbus_host *host, int dev, int reg) ++{ ++ return cbus_host ? cbus_transfer(host, dev, reg, -1) : -ENODEV; ++} ++ ++/* ++ * Write to a given register of the device ++ */ ++int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val) ++{ ++ return cbus_host ? cbus_transfer(host, dev, reg, (int)val) : -ENODEV; ++} ++ ++int __init cbus_bus_init(void) ++{ ++ const struct omap_cbus_config * cbus_config; ++ struct cbus_host *chost; ++ int ret; ++ ++ chost = kmalloc(sizeof (*chost), GFP_KERNEL); ++ if (chost == NULL) ++ return -ENOMEM; ++ ++ memset(chost, 0, sizeof (*chost)); ++ ++ spin_lock_init(&chost->lock); ++ ++ cbus_config = omap_get_config(OMAP_TAG_CBUS, struct omap_cbus_config); ++ ++ if (cbus_config == NULL) { ++ printk(KERN_ERR "cbus: Unable to retrieve config data\n"); ++ return -ENODATA; ++ } ++ ++ chost->clk_gpio = cbus_config->clk_gpio; ++ chost->dat_gpio = cbus_config->dat_gpio; ++ chost->sel_gpio = cbus_config->sel_gpio; ++ ++#ifdef CONFIG_ARCH_OMAP1 ++ if (!OMAP_GPIO_IS_MPUIO(chost->clk_gpio) || ++ !OMAP_GPIO_IS_MPUIO(chost->dat_gpio) || ++ !OMAP_GPIO_IS_MPUIO(chost->sel_gpio)) { ++ printk(KERN_ERR "cbus: Only MPUIO pins supported\n"); ++ ret = -ENODEV; ++ goto exit1; ++ } ++#endif ++ ++ if ((ret = gpio_request(chost->clk_gpio, "CBUS clk")) < 0) ++ goto exit1; ++ ++ if ((ret = gpio_request(chost->dat_gpio, "CBUS data")) < 0) ++ goto exit2; ++ ++ if ((ret = gpio_request(chost->sel_gpio, "CBUS sel")) < 0) ++ goto exit3; ++ ++ gpio_direction_output(chost->clk_gpio, 0); ++ gpio_direction_input(chost->dat_gpio); ++ gpio_direction_output(chost->sel_gpio, 1); ++ ++ gpio_set_value(chost->clk_gpio, 1); ++ gpio_set_value(chost->clk_gpio, 0); ++ ++ cbus_host = chost; ++ ++ return 0; ++exit3: ++ gpio_free(chost->dat_gpio); ++exit2: ++ gpio_free(chost->clk_gpio); ++exit1: ++ kfree(chost); ++ return ret; ++} ++ ++subsys_initcall(cbus_bus_init); ++ ++EXPORT_SYMBOL(cbus_host); ++EXPORT_SYMBOL(cbus_read_reg); ++EXPORT_SYMBOL(cbus_write_reg); ++ ++MODULE_DESCRIPTION("CBUS serial protocol"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen"); +diff --git a/drivers/cbus/cbus.h b/drivers/cbus/cbus.h +new file mode 100644 +index 0000000..957224c +--- /dev/null ++++ b/drivers/cbus/cbus.h +@@ -0,0 +1,36 @@ ++/* ++ * drivers/cbus/cbus.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and ++ * David Weinehall <david.weinehall@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_CBUS_H ++#define __DRIVERS_CBUS_CBUS_H ++ ++struct cbus_host { ++ int clk_gpio, dat_gpio, sel_gpio; ++ spinlock_t lock; ++}; ++ ++extern struct cbus_host *cbus_host; ++ ++extern int cbus_read_reg(struct cbus_host *host, int dev, int reg); ++extern int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val); ++ ++#endif /* __DRIVERS_CBUS_CBUS_H */ +diff --git a/drivers/cbus/retu-headset.c b/drivers/cbus/retu-headset.c +new file mode 100644 +index 0000000..e798bc2 +--- /dev/null ++++ b/drivers/cbus/retu-headset.c +@@ -0,0 +1,355 @@ ++/** ++ * Retu/Vilma headset detection ++ * ++ * Copyright (C) 2006 Nokia Corporation ++ * ++ * Written by Juha Yrjölä ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/input.h> ++#include <linux/platform_device.h> ++ ++#include "retu.h" ++ ++#define RETU_ADC_CHANNEL_HOOKDET 0x05 ++ ++#define RETU_HEADSET_KEY KEY_PHONE ++ ++struct retu_headset { ++ spinlock_t lock; ++ struct mutex mutex; ++ struct platform_device *pdev; ++ struct input_dev *idev; ++ unsigned bias_enabled; ++ unsigned detection_enabled; ++ unsigned pressed; ++ struct timer_list enable_timer; ++ struct timer_list detect_timer; ++}; ++ ++static void retu_headset_set_bias(int enable) ++{ ++ if (enable) { ++ retu_set_clear_reg_bits(RETU_REG_AUDTXR, ++ (1 << 0) | (1 << 1), 0); ++ msleep(2); ++ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 1 << 3, 0); ++ } else { ++ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 0, ++ (1 << 0) | (1 << 1) | (1 << 3)); ++ } ++} ++ ++static void retu_headset_enable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (!hs->bias_enabled) { ++ hs->bias_enabled = 1; ++ retu_headset_set_bias(1); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_disable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) { ++ hs->bias_enabled = 0; ++ retu_headset_set_bias(0); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_det_enable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (!hs->detection_enabled) { ++ hs->detection_enabled = 1; ++ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0); ++ retu_enable_irq(RETU_INT_HOOK); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_det_disable(struct retu_headset *hs) ++{ ++ unsigned long flags; ++ ++ mutex_lock(&hs->mutex); ++ if (hs->detection_enabled) { ++ hs->detection_enabled = 0; ++ retu_disable_irq(RETU_INT_HOOK); ++ del_timer_sync(&hs->enable_timer); ++ del_timer_sync(&hs->detect_timer); ++ spin_lock_irqsave(&hs->lock, flags); ++ if (hs->pressed) ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0); ++ spin_unlock_irqrestore(&hs->lock, flags); ++ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8)); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static ssize_t retu_headset_hookdet_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ int val; ++ ++ val = retu_read_adc(RETU_ADC_CHANNEL_HOOKDET); ++ return sprintf(buf, "%d\n", val); ++} ++ ++static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL); ++ ++static ssize_t retu_headset_enable_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", hs->bias_enabled); ++} ++ ++static ssize_t retu_headset_enable_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ int enable; ++ ++ if (sscanf(buf, "%u", &enable) != 1) ++ return -EINVAL; ++ if (enable) ++ retu_headset_enable(hs); ++ else ++ retu_headset_disable(hs); ++ return count; ++} ++ ++static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP, ++ retu_headset_enable_show, retu_headset_enable_store); ++ ++static ssize_t retu_headset_enable_det_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", hs->detection_enabled); ++} ++ ++static ssize_t retu_headset_enable_det_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ int enable; ++ ++ if (sscanf(buf, "%u", &enable) != 1) ++ return -EINVAL; ++ if (enable) ++ retu_headset_det_enable(hs); ++ else ++ retu_headset_det_disable(hs); ++ return count; ++} ++ ++static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP, ++ retu_headset_enable_det_show, ++ retu_headset_enable_det_store); ++ ++static void retu_headset_hook_interrupt(unsigned long arg) ++{ ++ struct retu_headset *hs = (struct retu_headset *) arg; ++ unsigned long flags; ++ ++ retu_ack_irq(RETU_INT_HOOK); ++ spin_lock_irqsave(&hs->lock, flags); ++ if (!hs->pressed) { ++ /* Headset button was just pressed down. */ ++ hs->pressed = 1; ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 1); ++ } ++ spin_unlock_irqrestore(&hs->lock, flags); ++ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8)); ++ mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50)); ++} ++ ++static void retu_headset_enable_timer(unsigned long arg) ++{ ++ struct retu_headset *hs = (struct retu_headset *) arg; ++ ++ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0); ++ mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350)); ++} ++ ++static void retu_headset_detect_timer(unsigned long arg) ++{ ++ struct retu_headset *hs = (struct retu_headset *) arg; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hs->lock, flags); ++ if (hs->pressed) { ++ hs->pressed = 0; ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0); ++ } ++ spin_unlock_irqrestore(&hs->lock, flags); ++} ++ ++static int __init retu_headset_probe(struct platform_device *pdev) ++{ ++ struct retu_headset *hs; ++ int r; ++ ++ hs = kzalloc(sizeof(*hs), GFP_KERNEL); ++ if (hs == NULL) ++ return -ENOMEM; ++ ++ hs->pdev = pdev; ++ ++ hs->idev = input_allocate_device(); ++ if (hs->idev == NULL) { ++ r = -ENOMEM; ++ goto err1; ++ } ++ hs->idev->name = "retu-headset"; ++ hs->idev->dev.parent = &pdev->dev; ++ set_bit(EV_KEY, hs->idev->evbit); ++ set_bit(RETU_HEADSET_KEY, hs->idev->keybit); ++ r = input_register_device(hs->idev); ++ if (r < 0) ++ goto err2; ++ ++ r = device_create_file(&pdev->dev, &dev_attr_hookdet); ++ if (r < 0) ++ goto err3; ++ r = device_create_file(&pdev->dev, &dev_attr_enable); ++ if (r < 0) ++ goto err4; ++ r = device_create_file(&pdev->dev, &dev_attr_enable_det); ++ if (r < 0) ++ goto err5; ++ platform_set_drvdata(pdev, hs); ++ ++ spin_lock_init(&hs->lock); ++ mutex_init(&hs->mutex); ++ setup_timer(&hs->enable_timer, retu_headset_enable_timer, ++ (unsigned long) hs); ++ setup_timer(&hs->detect_timer, retu_headset_detect_timer, ++ (unsigned long) hs); ++ ++ r = retu_request_irq(RETU_INT_HOOK, retu_headset_hook_interrupt, ++ (unsigned long) hs, "hookdet"); ++ if (r != 0) { ++ dev_err(&pdev->dev, "hookdet IRQ not available\n"); ++ goto err6; ++ } ++ retu_disable_irq(RETU_INT_HOOK); ++ return 0; ++err6: ++ device_remove_file(&pdev->dev, &dev_attr_enable_det); ++err5: ++ device_remove_file(&pdev->dev, &dev_attr_enable); ++err4: ++ device_remove_file(&pdev->dev, &dev_attr_hookdet); ++err3: ++ input_unregister_device(hs->idev); ++err2: ++ input_free_device(hs->idev); ++err1: ++ kfree(hs); ++ return r; ++} ++ ++static int retu_headset_remove(struct platform_device *pdev) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ device_remove_file(&pdev->dev, &dev_attr_hookdet); ++ device_remove_file(&pdev->dev, &dev_attr_enable); ++ device_remove_file(&pdev->dev, &dev_attr_enable_det); ++ retu_headset_disable(hs); ++ retu_headset_det_disable(hs); ++ retu_free_irq(RETU_INT_HOOK); ++ input_unregister_device(hs->idev); ++ input_free_device(hs->idev); ++ return 0; ++} ++ ++static int retu_headset_suspend(struct platform_device *pdev, ++ pm_message_t mesg) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) ++ retu_headset_set_bias(0); ++ mutex_unlock(&hs->mutex); ++ ++ return 0; ++} ++ ++static int retu_headset_resume(struct platform_device *pdev) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) ++ retu_headset_set_bias(1); ++ mutex_unlock(&hs->mutex); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_headset_driver = { ++ .probe = retu_headset_probe, ++ .remove = retu_headset_remove, ++ .suspend = retu_headset_suspend, ++ .resume = retu_headset_resume, ++ .driver = { ++ .name = "retu-headset", ++ }, ++}; ++ ++static int __init retu_headset_init(void) ++{ ++ int r; ++ ++ printk(KERN_INFO "Retu/Vilma headset driver initializing\n"); ++ ++ r = platform_driver_register(&retu_headset_driver); ++ if (r < 0) ++ return r; ++ ++ return 0; ++} ++ ++static void __exit retu_headset_exit(void) ++{ ++ platform_driver_unregister(&retu_headset_driver); ++} ++ ++module_init(retu_headset_init); ++module_exit(retu_headset_exit); ++ ++MODULE_DESCRIPTION("Retu/Vilma headset detection"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä"); +diff --git a/drivers/cbus/retu-pwrbutton.c b/drivers/cbus/retu-pwrbutton.c +new file mode 100644 +index 0000000..38d7aa4 +--- /dev/null ++++ b/drivers/cbus/retu-pwrbutton.c +@@ -0,0 +1,118 @@ ++/** ++ * drivers/cbus/retu-pwrbutton.c ++ * ++ * Driver for sending retu power button event to input-layer ++ * ++ * Copyright (C) 2004 Nokia Corporation ++ * ++ * Written by Ari Saastamoinen <ari.saastamoinen@elektrobit.com> ++ * ++ * Contact Juha Yrjölä <juha.yrjola@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/input.h> ++#include <linux/timer.h> ++#include <linux/jiffies.h> ++#include <linux/bitops.h> ++ ++#include "retu.h" ++ ++#define RETU_STATUS_PWRONX (1 << 5) ++ ++#define PWRBTN_DELAY 20 ++#define PWRBTN_UP 0 ++#define PWRBTN_PRESSED 1 ++ ++static int pwrbtn_state; ++static struct input_dev *pwrbtn_dev; ++static struct timer_list pwrbtn_timer; ++ ++static void retubutton_timer_func(unsigned long arg) ++{ ++ int state; ++ ++ if (retu_read_reg(RETU_REG_STATUS) & RETU_STATUS_PWRONX) ++ state = PWRBTN_UP; ++ else ++ state = PWRBTN_PRESSED; ++ ++ if (pwrbtn_state != state) { ++ input_report_key(pwrbtn_dev, KEY_POWER, state); ++ pwrbtn_state = state; ++ } ++} ++ ++/** ++ * Interrupt function is called whenever power button key is pressed ++ * or released. ++ */ ++static void retubutton_irq(unsigned long arg) ++{ ++ retu_ack_irq(RETU_INT_PWR); ++ mod_timer(&pwrbtn_timer, jiffies + msecs_to_jiffies(PWRBTN_DELAY)); ++} ++ ++/** ++ * Init function. ++ * Allocates interrupt for power button and registers itself to input layer. ++ */ ++static int __init retubutton_init(void) ++{ ++ int irq; ++ ++ printk(KERN_INFO "Retu power button driver initialized\n"); ++ irq = RETU_INT_PWR; ++ ++ init_timer(&pwrbtn_timer); ++ pwrbtn_timer.function = retubutton_timer_func; ++ ++ if (retu_request_irq(irq, &retubutton_irq, 0, "PwrOnX") < 0) { ++ printk(KERN_ERR "%s@%s: Cannot allocate irq\n", ++ __FUNCTION__, __FILE__); ++ return -EBUSY; ++ } ++ ++ pwrbtn_dev = input_allocate_device(); ++ if (!pwrbtn_dev) ++ return -ENOMEM; ++ ++ pwrbtn_dev->evbit[0] = BIT_MASK(EV_KEY); ++ pwrbtn_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); ++ pwrbtn_dev->name = "retu-pwrbutton"; ++ ++ return input_register_device(pwrbtn_dev); ++} ++ ++/** ++ * Cleanup function which is called when driver is unloaded ++ */ ++static void __exit retubutton_exit(void) ++{ ++ retu_free_irq(RETU_INT_PWR); ++ del_timer_sync(&pwrbtn_timer); ++ input_unregister_device(pwrbtn_dev); ++} ++ ++module_init(retubutton_init); ++module_exit(retubutton_exit); ++ ++MODULE_DESCRIPTION("Retu Power Button"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Ari Saastamoinen"); +diff --git a/drivers/cbus/retu-rtc.c b/drivers/cbus/retu-rtc.c +new file mode 100644 +index 0000000..1ebc33b +--- /dev/null ++++ b/drivers/cbus/retu-rtc.c +@@ -0,0 +1,477 @@ ++/** ++ * drivers/cbus/retu-rtc.c ++ * ++ * Support for Retu RTC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Paul Mundt <paul.mundt@nokia.com> and ++ * Igor Stoppa <igor.stoppa@nokia.com> ++ * ++ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's ++ * idea of what time actually is. It's left as a userspace excercise to map ++ * this back to time in the real world and ensure that calibration settings ++ * are sane to compensate for any horrible drift (on account of not being able ++ * to set the clock to anything). ++ * ++ * Days are semi-writeable. Namely, Retu will only track 255 days for us ++ * consecutively, after which the counter is explicitly stuck at 255 until ++ * someone comes along and clears it with a write. In the event that no one ++ * comes along and clears it, we no longer have any idea what day it is. ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/device.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/completion.h> ++#include <linux/platform_device.h> ++#include <linux/mutex.h> ++#include <linux/workqueue.h> ++ ++#include "cbus.h" ++#include "retu.h" ++ ++static struct mutex retu_rtc_mutex; ++static u16 retu_rtc_alarm_expired; ++static u16 retu_rtc_reset_occurred; ++ ++static DECLARE_COMPLETION(retu_rtc_exited); ++static DECLARE_COMPLETION(retu_rtc_sync); ++ ++static void retu_rtc_barrier(void); ++ ++static void retu_rtc_device_release(struct device *dev) ++{ ++ complete(&retu_rtc_exited); ++} ++ ++static ssize_t retu_rtc_time_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ u16 dsr, hmr, dsr2; ++ ++ mutex_lock(&retu_rtc_mutex); ++ ++ do { ++ u16 dummy; ++ ++ /* ++ * Not being in_interrupt() for a retu rtc IRQ, we need to ++ * read twice for consistency.. ++ */ ++ dummy = retu_read_reg(RETU_REG_RTCDSR); ++ dsr = retu_read_reg(RETU_REG_RTCDSR); ++ ++ dummy = retu_read_reg(RETU_REG_RTCHMR); ++ hmr = retu_read_reg(RETU_REG_RTCHMR); ++ ++ dummy = retu_read_reg(RETU_REG_RTCDSR); ++ dsr2 = retu_read_reg(RETU_REG_RTCDSR); ++ } while ((dsr != dsr2)); ++ ++ mutex_unlock(&retu_rtc_mutex); ++ ++ /* ++ * Format a 32-bit date-string for userspace ++ * ++ * days | hours | minutes | seconds ++ * ++ * 8 bits for each. ++ * ++ * This mostly sucks because days and seconds are tracked in RTCDSR ++ * while hours and minutes are tracked in RTCHMR. And yes, there ++ * really are no words that can describe an 8 bit day register (or ++ * rather, none that will be reprinted here). ++ */ ++ return sprintf(buf, "0x%08x\n", (((dsr >> 8) & 0xff) << 24) | ++ (((hmr >> 8) & 0x1f) << 16) | ++ ((hmr & 0x3f) << 8) | (dsr & 0x3f)); ++} ++ ++static ssize_t retu_rtc_time_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ mutex_lock(&retu_rtc_mutex); ++ /* ++ * Writing anything to the day counter forces it to 0 ++ * The seconds counter would be cleared by resetting the minutes counter, ++ * however this won't happen, since we are using the hh:mm counters as ++ * a set of free running counters and the day counter as a multiple ++ * overflow holder. ++ */ ++ ++ /* Reset day counter, but keep Temperature Shutdown state */ ++ retu_write_reg(RETU_REG_RTCDSR, ++ retu_read_reg(RETU_REG_RTCDSR) & (1 << 6)); ++ ++ mutex_unlock(&retu_rtc_mutex); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(time, S_IRUGO | S_IWUSR, retu_rtc_time_show, ++ retu_rtc_time_store); ++ ++ ++static ssize_t retu_rtc_reset_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ /* ++ * Returns the status of the rtc ++ * ++ * 0: no reset has occurred or the status has been cleared ++ * 1: a reset has occurred ++ * ++ * RTC needs to be reset only when both main battery ++ * _AND_ backup battery are discharged ++ */ ++ return sprintf(buf, "%u\n", retu_rtc_reset_occurred); ++} ++ ++static void retu_rtc_do_reset(void) ++{ ++ u16 ccr1; ++ ++ ccr1 = retu_read_reg(RETU_REG_CC1); ++ /* RTC in reset */ ++ retu_write_reg(RETU_REG_CC1, ccr1 | 0x0001); ++ /* RTC in normal operating mode */ ++ retu_write_reg(RETU_REG_CC1, ccr1 & ~0x0001); ++ ++ retu_rtc_barrier(); ++ /* Disable alarm and RTC WD */ ++ retu_write_reg(RETU_REG_RTCHMAR, 0x7f3f); ++ /* Set Calibration register to default value */ ++ retu_write_reg(RETU_REG_RTCCALR, 0x00c0); ++ ++ retu_rtc_alarm_expired = 0; ++ retu_rtc_reset_occurred = 1; ++} ++ ++static ssize_t retu_rtc_reset_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned choice; ++ ++ if(sscanf(buf, "%u", &choice) != 1) ++ return count; ++ mutex_lock(&retu_rtc_mutex); ++ if (choice == 0) ++ retu_rtc_reset_occurred = 0; ++ else if (choice == 1) ++ retu_rtc_do_reset(); ++ mutex_unlock(&retu_rtc_mutex); ++ return count; ++} ++ ++static DEVICE_ATTR(reset, S_IRUGO | S_IWUSR, retu_rtc_reset_show, ++ retu_rtc_reset_store); ++ ++static ssize_t retu_rtc_alarm_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ u16 chmar; ++ ssize_t retval; ++ ++ mutex_lock(&retu_rtc_mutex); ++ /* ++ * Format a 16-bit date-string for userspace ++ * ++ * hours | minutes ++ * 8 bits for each. ++ */ ++ chmar = retu_read_reg(RETU_REG_RTCHMAR); ++ /* No shifting needed, only masking unrelated bits */ ++ retval = sprintf(buf, "0x%04x\n", chmar & 0x1f3f); ++ mutex_unlock(&retu_rtc_mutex); ++ ++ return retval; ++} ++ ++static ssize_t retu_rtc_alarm_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ u16 chmar; ++ unsigned alrm; ++ unsigned hours; ++ unsigned minutes; ++ ++ mutex_lock(&retu_rtc_mutex); ++ ++ if(sscanf(buf, "%x", &alrm) != 1) ++ return count; ++ hours = (alrm >> 8) & 0x001f; ++ minutes = (alrm >> 0) & 0x003f; ++ if ((hours < 24 && minutes < 60) || (hours == 24 && minutes == 60)) { ++ /* ++ * OK, the time format for the alarm is valid (including the ++ * disabling values) ++ */ ++ /* Keeps the RTC watchdog status */ ++ chmar = retu_read_reg(RETU_REG_RTCHMAR) & 0x6000; ++ chmar |= alrm & 0x1f3f; /* Stores the requested alarm */ ++ retu_rtc_barrier(); ++ retu_write_reg(RETU_REG_RTCHMAR, chmar); ++ /* If the alarm is being disabled */ ++ if (hours == 24 && minutes == 60) { ++ /* disable the interrupt */ ++ retu_disable_irq(RETU_INT_RTCA); ++ retu_rtc_alarm_expired = 0; ++ } else ++ /* enable the interrupt */ ++ retu_enable_irq(RETU_INT_RTCA); ++ } ++ mutex_unlock(&retu_rtc_mutex); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, retu_rtc_alarm_show, ++ retu_rtc_alarm_store); ++ ++static ssize_t retu_rtc_alarm_expired_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ ssize_t retval; ++ ++ retval = sprintf(buf, "%u\n", retu_rtc_alarm_expired); ++ ++ return retval; ++} ++ ++static ssize_t retu_rtc_alarm_expired_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ retu_rtc_alarm_expired = 0; ++ ++ return count; ++} ++ ++static DEVICE_ATTR(alarm_expired, S_IRUGO | S_IWUSR, retu_rtc_alarm_expired_show, ++ retu_rtc_alarm_expired_store); ++ ++ ++static ssize_t retu_rtc_cal_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ u16 rtccalr1; ++ ++ mutex_lock(&retu_rtc_mutex); ++ rtccalr1 = retu_read_reg(RETU_REG_RTCCALR); ++ mutex_unlock(&retu_rtc_mutex); ++ ++ /* ++ * Shows the status of the Calibration Register. ++ * ++ * Default, after power loss: 0x0000 ++ * Default, for R&D: 0x00C0 ++ * Default, for factory: 0x00?? ++ * ++ */ ++ return sprintf(buf, "0x%04x\n", rtccalr1 & 0x00ff); ++} ++ ++static ssize_t retu_rtc_cal_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned calibration_value; ++ ++ if (sscanf(buf, "%x", &calibration_value) != 1) ++ return count; ++ ++ mutex_lock(&retu_rtc_mutex); ++ retu_rtc_barrier(); ++ retu_write_reg(RETU_REG_RTCCALR, calibration_value & 0x00ff); ++ mutex_unlock(&retu_rtc_mutex); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(cal, S_IRUGO | S_IWUSR, retu_rtc_cal_show, ++ retu_rtc_cal_store); ++ ++static struct platform_device retu_rtc_device; ++ ++static void retu_rtca_disable(void) ++{ ++ retu_disable_irq(RETU_INT_RTCA); ++ retu_rtc_alarm_expired = 1; ++ retu_rtc_barrier(); ++ retu_write_reg(RETU_REG_RTCHMAR, (24 << 8) | 60); ++} ++ ++static void retu_rtca_expired(struct work_struct *unused) ++{ ++ retu_rtca_disable(); ++ sysfs_notify(&retu_rtc_device.dev.kobj, NULL, "alarm_expired"); ++} ++ ++DECLARE_WORK(retu_rtca_work, retu_rtca_expired); ++ ++/* ++ * RTCHMR RTCHMAR RTCCAL must be accessed within 0.9 s since the seconds ++ * interrupt has been signaled in the IDR register ++ */ ++static void retu_rtcs_interrupt(unsigned long unused) ++{ ++ retu_ack_irq(RETU_INT_RTCS); ++ complete_all(&retu_rtc_sync); ++} ++ ++static void retu_rtca_interrupt(unsigned long unused) ++{ ++ retu_ack_irq(RETU_INT_RTCA); ++ schedule_work(&retu_rtca_work); ++} ++ ++static int retu_rtc_init_irq(void) ++{ ++ int ret; ++ ++ ret = retu_request_irq(RETU_INT_RTCS, retu_rtcs_interrupt, 0, "RTCS"); ++ if (ret != 0) ++ return ret; ++ /* ++ * We will take care of enabling and disabling the interrupt ++ * elsewhere, so leave it off by default.. ++ */ ++ retu_disable_irq(RETU_INT_RTCS); ++ ++ ret = retu_request_irq(RETU_INT_RTCA, retu_rtca_interrupt, 0, "RTCA"); ++ if (ret != 0) { ++ retu_free_irq(RETU_INT_RTCS); ++ return ret; ++ } ++ retu_disable_irq(RETU_INT_RTCA); ++ ++ return 0; ++} ++ ++ ++static int __devinit retu_rtc_probe(struct device *dev) ++{ ++ int r; ++ ++ retu_rtc_alarm_expired = retu_read_reg(RETU_REG_IDR) & ++ (0x1 << RETU_INT_RTCA); ++ ++ if ((r = retu_rtc_init_irq()) != 0) ++ return r; ++ ++ mutex_init(&retu_rtc_mutex); ++ ++ /* If the calibration register is zero, we've probably lost ++ * power */ ++ if (retu_read_reg(RETU_REG_RTCCALR) & 0x00ff) ++ retu_rtc_reset_occurred = 0; ++ else ++ retu_rtc_do_reset(); ++ ++ if ((r = device_create_file(dev, &dev_attr_time)) != 0) ++ return r; ++ else if ((r = device_create_file(dev, &dev_attr_reset)) != 0) ++ goto err_unregister_time; ++ else if ((r = device_create_file(dev, &dev_attr_alarm)) != 0) ++ goto err_unregister_reset; ++ else if ((r = device_create_file(dev, &dev_attr_alarm_expired)) != 0) ++ goto err_unregister_alarm; ++ else if ((r = device_create_file(dev, &dev_attr_cal)) != 0) ++ goto err_unregister_alarm_expired; ++ else ++ return r; ++ ++err_unregister_alarm_expired: ++ device_remove_file(dev, &dev_attr_alarm_expired); ++err_unregister_alarm: ++ device_remove_file(dev, &dev_attr_alarm); ++err_unregister_reset: ++ device_remove_file(dev, &dev_attr_reset); ++err_unregister_time: ++ device_remove_file(dev, &dev_attr_time); ++ return r; ++} ++ ++static int __devexit retu_rtc_remove(struct device *dev) ++{ ++ retu_disable_irq(RETU_INT_RTCS); ++ retu_free_irq(RETU_INT_RTCS); ++ retu_free_irq(RETU_INT_RTCA); ++ device_remove_file(dev, &dev_attr_cal); ++ device_remove_file(dev, &dev_attr_alarm_expired); ++ device_remove_file(dev, &dev_attr_alarm); ++ device_remove_file(dev, &dev_attr_reset); ++ device_remove_file(dev, &dev_attr_time); ++ return 0; ++} ++ ++static struct device_driver retu_rtc_driver = { ++ .name = "retu-rtc", ++ .bus = &platform_bus_type, ++ .probe = retu_rtc_probe, ++ .remove = __devexit_p(retu_rtc_remove), ++}; ++ ++static struct platform_device retu_rtc_device = { ++ .name = "retu-rtc", ++ .id = -1, ++ .dev = { ++ .release = retu_rtc_device_release, ++ }, ++}; ++ ++/* This function provides syncronization with the RTCS interrupt handler */ ++static void retu_rtc_barrier(void) ++{ ++ INIT_COMPLETION(retu_rtc_sync); ++ retu_ack_irq(RETU_INT_RTCS); ++ retu_enable_irq(RETU_INT_RTCS); ++ wait_for_completion(&retu_rtc_sync); ++ retu_disable_irq(RETU_INT_RTCS); ++} ++ ++static int __init retu_rtc_init(void) ++{ ++ int ret; ++ ++ init_completion(&retu_rtc_exited); ++ ++ if ((ret = driver_register(&retu_rtc_driver)) != 0) ++ return ret; ++ ++ if ((ret = platform_device_register(&retu_rtc_device)) != 0) ++ goto err_unregister_driver; ++ ++ return 0; ++ ++err_unregister_driver: ++ driver_unregister(&retu_rtc_driver); ++ return ret; ++} ++ ++static void __exit retu_rtc_exit(void) ++{ ++ platform_device_unregister(&retu_rtc_device); ++ driver_unregister(&retu_rtc_driver); ++ ++ wait_for_completion(&retu_rtc_exited); ++} ++ ++module_init(retu_rtc_init); ++module_exit(retu_rtc_exit); ++ ++MODULE_DESCRIPTION("Retu RTC"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Paul Mundt and Igor Stoppa"); +diff --git a/drivers/cbus/retu-user.c b/drivers/cbus/retu-user.c +new file mode 100644 +index 0000000..74a7d61 +--- /dev/null ++++ b/drivers/cbus/retu-user.c +@@ -0,0 +1,423 @@ ++/** ++ * drivers/cbus/retu-user.c ++ * ++ * Retu user space interface functions ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/poll.h> ++#include <linux/list.h> ++#include <linux/spinlock.h> ++#include <linux/mutex.h> ++ ++#include <asm/uaccess.h> ++ ++#include "retu.h" ++ ++#include "user_retu_tahvo.h" ++ ++/* Maximum size of IRQ node buffer/pool */ ++#define RETU_MAX_IRQ_BUF_LEN 16 ++ ++#define PFX "retu-user: " ++ ++/* Bitmap for marking the interrupt sources as having the handlers */ ++static u32 retu_irq_bits; ++ ++/* For allowing only one user process to subscribe to the retu interrupts */ ++static struct file *retu_irq_subscr = NULL; ++ ++/* For poll and IRQ passing */ ++struct retu_irq { ++ u32 id; ++ struct list_head node; ++}; ++ ++static spinlock_t retu_irqs_lock; ++static struct retu_irq *retu_irq_block; ++static LIST_HEAD(retu_irqs); ++static LIST_HEAD(retu_irqs_reserve); ++ ++/* Wait queue - used when user wants to read the device */ ++DECLARE_WAIT_QUEUE_HEAD(retu_user_waitqueue); ++ ++/* Semaphore to protect irq subscription sequence */ ++static struct mutex retu_mutex; ++ ++/* This array specifies RETU register types (read/write/toggle) */ ++static const u8 retu_access_bits[] = { ++ 1, ++ 4, ++ 3, ++ 3, ++ 1, ++ 3, ++ 3, ++ 0, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 4, ++ 4, ++ 3, ++ 0, ++ 0, ++ 0, ++ 0, ++ 1, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3 ++}; ++ ++/* ++ * The handler for all RETU interrupts. ++ * ++ * arg is the interrupt source in RETU. ++ */ ++static void retu_user_irq_handler(unsigned long arg) ++{ ++ struct retu_irq *irq; ++ ++ retu_ack_irq(arg); ++ ++ spin_lock(&retu_irqs_lock); ++ if (list_empty(&retu_irqs_reserve)) { ++ spin_unlock(&retu_irqs_lock); ++ return; ++ } ++ irq = list_entry((&retu_irqs_reserve)->next, struct retu_irq, node); ++ irq->id = arg; ++ list_move_tail(&irq->node, &retu_irqs); ++ spin_unlock(&retu_irqs_lock); ++ ++ /* wake up waiting thread */ ++ wake_up(&retu_user_waitqueue); ++} ++ ++/* ++ * This routine sets up the interrupt handler and marks an interrupt source ++ * in RETU as a candidate for signal delivery to the user process. ++ */ ++static int retu_user_subscribe_to_irq(int id, struct file *filp) ++{ ++ int ret; ++ ++ mutex_lock(&retu_mutex); ++ if ((retu_irq_subscr != NULL) && (retu_irq_subscr != filp)) { ++ mutex_unlock(&retu_mutex); ++ return -EBUSY; ++ } ++ /* Store the file pointer of the first user process registering IRQs */ ++ retu_irq_subscr = filp; ++ mutex_unlock(&retu_mutex); ++ ++ if (retu_irq_bits & (1 << id)) ++ return 0; ++ ++ ret = retu_request_irq(id, retu_user_irq_handler, id, ""); ++ if (ret < 0) ++ return ret; ++ ++ /* Mark that this interrupt has a handler */ ++ retu_irq_bits |= 1 << id; ++ ++ return 0; ++} ++ ++/* ++ * Unregisters all RETU interrupt handlers. ++ */ ++static void retu_unreg_irq_handlers(void) ++{ ++ int id; ++ ++ if (!retu_irq_bits) ++ return; ++ ++ for (id = 0; id < MAX_RETU_IRQ_HANDLERS; id++) ++ if (retu_irq_bits & (1 << id)) ++ retu_free_irq(id); ++ ++ retu_irq_bits = 0; ++} ++ ++/* ++ * Write to RETU register. ++ * Returns 0 upon success, a negative error value otherwise. ++ */ ++static int retu_user_write_with_mask(u32 field, u16 value) ++{ ++ u32 mask; ++ u32 reg; ++ u_short tmp; ++ unsigned long flags; ++ ++ mask = MASK(field); ++ reg = REG(field); ++ ++ /* Detect bad mask and reg */ ++ if (mask == 0 || reg > RETU_REG_MAX || ++ retu_access_bits[reg] == READ_ONLY) { ++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n", ++ reg, mask); ++ return -EINVAL; ++ } ++ ++ /* Justify value according to mask */ ++ while (!(mask & 1)) { ++ value = value << 1; ++ mask = mask >> 1; ++ } ++ ++ spin_lock_irqsave(&retu_lock, flags); ++ if (retu_access_bits[reg] == TOGGLE) { ++ /* No need to detect previous content of register */ ++ tmp = 0; ++ } else { ++ /* Read current value of register */ ++ tmp = retu_read_reg(reg); ++ } ++ ++ /* Generate new value */ ++ tmp = (tmp & ~MASK(field)) | (value & MASK(field)); ++ /* Write data to RETU */ ++ retu_write_reg(reg, tmp); ++ spin_unlock_irqrestore(&retu_lock, flags); ++ ++ return 0; ++} ++ ++/* ++ * Read RETU register. ++ */ ++static u32 retu_user_read_with_mask(u32 field) ++{ ++ u_short value; ++ u32 mask, reg; ++ ++ mask = MASK(field); ++ reg = REG(field); ++ ++ /* Detect bad mask and reg */ ++ if (mask == 0 || reg > RETU_REG_MAX) { ++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n", ++ reg, mask); ++ return -EINVAL; ++ } ++ ++ /* Read the register */ ++ value = retu_read_reg(reg) & mask; ++ ++ /* Right justify value */ ++ while (!(mask & 1)) { ++ value = value >> 1; ++ mask = mask >> 1; ++ } ++ ++ return value; ++} ++ ++/* ++ * Close device ++ */ ++static int retu_close(struct inode *inode, struct file *filp) ++{ ++ /* Unregister all interrupts that have been registered */ ++ if (retu_irq_subscr == filp) { ++ retu_unreg_irq_handlers(); ++ retu_irq_subscr = NULL; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Device control (ioctl) ++ */ ++static int retu_ioctl(struct inode *inode, struct file *filp, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct retu_tahvo_write_parms par; ++ int ret; ++ ++ switch (cmd) { ++ case URT_IOCT_IRQ_SUBSCR: ++ return retu_user_subscribe_to_irq(arg, filp); ++ case RETU_IOCH_READ: ++ return retu_user_read_with_mask(arg); ++ case RETU_IOCX_WRITE: ++ ret = copy_from_user(&par, (void __user *) arg, sizeof(par)); ++ if (ret) ++ printk(KERN_ERR "copy_from_user failed: %d\n", ret); ++ par.result = retu_user_write_with_mask(par.field, par.value); ++ ret = copy_to_user((void __user *) arg, &par, sizeof(par)); ++ if (ret) ++ printk(KERN_ERR "copy_to_user failed: %d\n", ret); ++ break; ++ case RETU_IOCH_ADC_READ: ++ return retu_read_adc(arg); ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++/* ++ * Read from device ++ */ ++static ssize_t retu_read(struct file *filp, char *buf, size_t count, ++ loff_t * offp) ++{ ++ struct retu_irq *irq; ++ ++ u32 nr, i; ++ ++ /* read not permitted if neither filp nor anyone has registered IRQs */ ++ if (retu_irq_subscr != filp) ++ return -EPERM; ++ ++ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0)) ++ return -EINVAL; ++ ++ nr = count / sizeof(u32); ++ ++ for (i = 0; i < nr; i++) { ++ unsigned long flags; ++ u32 irq_id; ++ int ret; ++ ++ ret = wait_event_interruptible(retu_user_waitqueue, ++ !list_empty(&retu_irqs)); ++ if (ret < 0) ++ return ret; ++ ++ spin_lock_irqsave(&retu_irqs_lock, flags); ++ irq = list_entry((&retu_irqs)->next, struct retu_irq, node); ++ irq_id = irq->id; ++ list_move(&irq->node, &retu_irqs_reserve); ++ spin_unlock_irqrestore(&retu_irqs_lock, flags); ++ ++ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id, ++ sizeof(irq_id)); ++ if (ret) ++ printk(KERN_ERR "copy_to_user failed: %d\n", ret); ++ } ++ ++ return count; ++} ++ ++/* ++ * Poll method ++ */ ++static unsigned retu_poll(struct file *filp, struct poll_table_struct *pt) ++{ ++ if (!list_empty(&retu_irqs)) ++ return POLLIN; ++ ++ poll_wait(filp, &retu_user_waitqueue, pt); ++ ++ if (!list_empty(&retu_irqs)) ++ return POLLIN; ++ else ++ return 0; ++} ++ ++static struct file_operations retu_user_fileops = { ++ .owner = THIS_MODULE, ++ .ioctl = retu_ioctl, ++ .read = retu_read, ++ .release = retu_close, ++ .poll = retu_poll ++}; ++ ++static struct miscdevice retu_device = { ++ .minor = MISC_DYNAMIC_MINOR, ++ .name = "retu", ++ .fops = &retu_user_fileops ++}; ++ ++/* ++ * Initialization ++ * ++ * @return 0 if successful, error value otherwise. ++ */ ++int retu_user_init(void) ++{ ++ struct retu_irq *irq; ++ int res, i; ++ ++ irq = kmalloc(sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN, GFP_KERNEL); ++ if (irq == NULL) { ++ printk(KERN_ERR PFX "kmalloc failed\n"); ++ return -ENOMEM; ++ } ++ memset(irq, 0, sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN); ++ for (i = 0; i < RETU_MAX_IRQ_BUF_LEN; i++) ++ list_add(&irq[i].node, &retu_irqs_reserve); ++ ++ retu_irq_block = irq; ++ ++ spin_lock_init(&retu_irqs_lock); ++ mutex_init(&retu_mutex); ++ ++ /* Request a misc device */ ++ res = misc_register(&retu_device); ++ if (res < 0) { ++ printk(KERN_ERR PFX "unable to register misc device for %s\n", ++ retu_device.name); ++ kfree(irq); ++ return res; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Cleanup. ++ */ ++void retu_user_cleanup(void) ++{ ++ /* Unregister our misc device */ ++ misc_deregister(&retu_device); ++ /* Unregister and disable all RETU interrupts used by this module */ ++ retu_unreg_irq_handlers(); ++ kfree(retu_irq_block); ++} ++ ++MODULE_DESCRIPTION("Retu ASIC user space functions"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mikko Ylinen"); +diff --git a/drivers/cbus/retu-wdt.c b/drivers/cbus/retu-wdt.c +new file mode 100644 +index 0000000..b7b20b7 +--- /dev/null ++++ b/drivers/cbus/retu-wdt.c +@@ -0,0 +1,202 @@ ++/** ++ * drivers/cbus/retu-wdt.c ++ * ++ * Driver for Retu watchdog ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Amit Kucheria <amit.kucheria@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/init.h> ++ ++#include <linux/completion.h> ++#include <linux/errno.h> ++#include <linux/moduleparam.h> ++#include <linux/platform_device.h> ++ ++#include "cbus.h" ++#include "retu.h" ++ ++/* Watchdog timeout in seconds */ ++#define RETU_WDT_MIN_TIMER 0 ++#define RETU_WDT_DEFAULT_TIMER 32 ++#define RETU_WDT_MAX_TIMER 63 ++ ++static struct completion retu_wdt_completion; ++static DEFINE_MUTEX(retu_wdt_mutex); ++ ++/* Current period of watchdog */ ++static unsigned int period_val = RETU_WDT_DEFAULT_TIMER; ++static int counter_param = RETU_WDT_MAX_TIMER; ++ ++static int retu_modify_counter(unsigned int new) ++{ ++ int ret = 0; ++ ++ if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER) ++ return -EINVAL; ++ ++ mutex_lock(&retu_wdt_mutex); ++ ++ period_val = new; ++ retu_write_reg(RETU_REG_WATCHDOG, (u16)period_val); ++ ++ mutex_unlock(&retu_wdt_mutex); ++ return ret; ++} ++ ++static ssize_t retu_wdt_period_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ /* Show current max counter */ ++ return sprintf(buf, "%u\n", (u16)period_val); ++} ++ ++static ssize_t retu_wdt_period_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned int new_period; ++ int ret; ++ ++ if (sscanf(buf, "%u", &new_period) != 1) { ++ printk(KERN_ALERT "retu_wdt_period_store: Invalid input\n"); ++ return -EINVAL; ++ } ++ ++ ret = retu_modify_counter(new_period); ++ if (ret < 0) ++ return ret; ++ ++ return strnlen(buf, count); ++} ++ ++static ssize_t retu_wdt_counter_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ u16 counter; ++ ++ /* Show current value in watchdog counter */ ++ counter = retu_read_reg(RETU_REG_WATCHDOG); ++ ++ /* Only the 5 LSB are important */ ++ return snprintf(buf, PAGE_SIZE, "%u\n", (counter & 0x3F)); ++} ++ ++static DEVICE_ATTR(period, S_IRUGO | S_IWUSR, retu_wdt_period_show, \ ++ retu_wdt_period_store); ++static DEVICE_ATTR(counter, S_IRUGO, retu_wdt_counter_show, NULL); ++ ++static int __devinit retu_wdt_probe(struct device *dev) ++{ ++ int ret; ++ ++ ret = device_create_file(dev, &dev_attr_period); ++ if (ret) { ++ printk(KERN_ERR "retu_wdt_probe: Error creating " ++ "sys device file: period\n"); ++ return ret; ++ } ++ ++ ret = device_create_file(dev, &dev_attr_counter); ++ if (ret) { ++ device_remove_file(dev, &dev_attr_period); ++ printk(KERN_ERR "retu_wdt_probe: Error creating " ++ "sys device file: counter\n"); ++ } ++ ++ return ret; ++} ++ ++static int __devexit retu_wdt_remove(struct device *dev) ++{ ++ device_remove_file(dev, &dev_attr_period); ++ device_remove_file(dev, &dev_attr_counter); ++ return 0; ++} ++ ++static void retu_wdt_device_release(struct device *dev) ++{ ++ complete(&retu_wdt_completion); ++} ++ ++static struct platform_device retu_wdt_device = { ++ .name = "retu-watchdog", ++ .id = -1, ++ .dev = { ++ .release = retu_wdt_device_release, ++ }, ++}; ++ ++static struct device_driver retu_wdt_driver = { ++ .name = "retu-watchdog", ++ .bus = &platform_bus_type, ++ .probe = retu_wdt_probe, ++ .remove = __devexit_p(retu_wdt_remove), ++}; ++ ++static int __init retu_wdt_init(void) ++{ ++ int ret; ++ ++ init_completion(&retu_wdt_completion); ++ ++ ret = driver_register(&retu_wdt_driver); ++ if (ret) ++ return ret; ++ ++ ret = platform_device_register(&retu_wdt_device); ++ if (ret) ++ goto exit1; ++ ++ /* passed as module parameter? */ ++ ret = retu_modify_counter(counter_param); ++ if (ret == -EINVAL) { ++ ret = retu_modify_counter(RETU_WDT_DEFAULT_TIMER); ++ printk(KERN_INFO ++ "retu_wdt_init: Intializing to default value\n"); ++ } ++ ++ printk(KERN_INFO "Retu watchdog driver initialized\n"); ++ return ret; ++ ++exit1: ++ driver_unregister(&retu_wdt_driver); ++ wait_for_completion(&retu_wdt_completion); ++ ++ return ret; ++} ++ ++static void __exit retu_wdt_exit(void) ++{ ++ platform_device_unregister(&retu_wdt_device); ++ driver_unregister(&retu_wdt_driver); ++ ++ wait_for_completion(&retu_wdt_completion); ++} ++ ++module_init(retu_wdt_init); ++module_exit(retu_wdt_exit); ++module_param(counter_param, int, 0); ++ ++MODULE_DESCRIPTION("Retu WatchDog"); ++MODULE_AUTHOR("Amit Kucheria"); ++MODULE_LICENSE("GPL"); ++ +diff --git a/drivers/cbus/retu.c b/drivers/cbus/retu.c +new file mode 100644 +index 0000000..84d7840 +--- /dev/null ++++ b/drivers/cbus/retu.c +@@ -0,0 +1,467 @@ ++/** ++ * drivers/cbus/retu.c ++ * ++ * Support functions for Retu ASIC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>, ++ * David Weinehall <david.weinehall@nokia.com>, and ++ * Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++ ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/device.h> ++#include <linux/miscdevice.h> ++#include <linux/poll.h> ++#include <linux/fs.h> ++#include <linux/irq.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/gpio.h> ++ ++#include <asm/uaccess.h> ++ ++#include <mach/mux.h> ++#include <mach/board.h> ++#include <mach/board-nokia.h> ++ ++#include "cbus.h" ++#include "retu.h" ++ ++#define RETU_ID 0x01 ++#define PFX "retu: " ++ ++static int retu_initialized; ++static int retu_irq_pin; ++static int retu_is_vilma; ++ ++static struct tasklet_struct retu_tasklet; ++spinlock_t retu_lock = SPIN_LOCK_UNLOCKED; ++ ++static struct completion device_release; ++ ++struct retu_irq_handler_desc { ++ int (*func)(unsigned long); ++ unsigned long arg; ++ char name[8]; ++}; ++ ++static struct retu_irq_handler_desc retu_irq_handlers[MAX_RETU_IRQ_HANDLERS]; ++ ++/** ++ * retu_read_reg - Read a value from a register in Retu ++ * @reg: the register to read from ++ * ++ * This function returns the contents of the specified register ++ */ ++int retu_read_reg(int reg) ++{ ++ BUG_ON(!retu_initialized); ++ return cbus_read_reg(cbus_host, RETU_ID, reg); ++} ++ ++/** ++ * retu_write_reg - Write a value to a register in Retu ++ * @reg: the register to write to ++ * @reg: the value to write to the register ++ * ++ * This function writes a value to the specified register ++ */ ++void retu_write_reg(int reg, u16 val) ++{ ++ BUG_ON(!retu_initialized); ++ cbus_write_reg(cbus_host, RETU_ID, reg, val); ++} ++ ++void retu_set_clear_reg_bits(int reg, u16 set, u16 clear) ++{ ++ unsigned long flags; ++ u16 w; ++ ++ spin_lock_irqsave(&retu_lock, flags); ++ w = retu_read_reg(reg); ++ w &= ~clear; ++ w |= set; ++ retu_write_reg(reg, w); ++ spin_unlock_irqrestore(&retu_lock, flags); ++} ++ ++#define ADC_MAX_CHAN_NUMBER 13 ++ ++int retu_read_adc(int channel) ++{ ++ unsigned long flags; ++ int res; ++ ++ if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&retu_lock, flags); ++ ++ if ((channel == 8) && retu_is_vilma) { ++ int scr = retu_read_reg(RETU_REG_ADCSCR); ++ int ch = (retu_read_reg(RETU_REG_ADCR) >> 10) & 0xf; ++ if (((scr & 0xff) != 0) && (ch != 8)) ++ retu_write_reg (RETU_REG_ADCSCR, (scr & ~0xff)); ++ } ++ ++ /* Select the channel and read result */ ++ retu_write_reg(RETU_REG_ADCR, channel << 10); ++ res = retu_read_reg(RETU_REG_ADCR) & 0x3ff; ++ ++ if (retu_is_vilma) ++ retu_write_reg(RETU_REG_ADCR, (1 << 13)); ++ ++ /* Unlock retu */ ++ spin_unlock_irqrestore(&retu_lock, flags); ++ ++ return res; ++} ++ ++ ++static u16 retu_disable_bogus_irqs(u16 mask) ++{ ++ int i; ++ ++ for (i = 0; i < MAX_RETU_IRQ_HANDLERS; i++) { ++ if (mask & (1 << i)) ++ continue; ++ if (retu_irq_handlers[i].func != NULL) ++ continue; ++ /* an IRQ was enabled but we don't have a handler for it */ ++ printk(KERN_INFO PFX "disabling bogus IRQ %d\n", i); ++ mask |= (1 << i); ++ } ++ return mask; ++} ++ ++/* ++ * Disable given RETU interrupt ++ */ ++void retu_disable_irq(int id) ++{ ++ unsigned long flags; ++ u16 mask; ++ ++ spin_lock_irqsave(&retu_lock, flags); ++ mask = retu_read_reg(RETU_REG_IMR); ++ mask |= 1 << id; ++ mask = retu_disable_bogus_irqs(mask); ++ retu_write_reg(RETU_REG_IMR, mask); ++ spin_unlock_irqrestore(&retu_lock, flags); ++} ++ ++/* ++ * Enable given RETU interrupt ++ */ ++void retu_enable_irq(int id) ++{ ++ unsigned long flags; ++ u16 mask; ++ ++ if (id == 3) { ++ printk("Enabling Retu IRQ %d\n", id); ++ dump_stack(); ++ } ++ spin_lock_irqsave(&retu_lock, flags); ++ mask = retu_read_reg(RETU_REG_IMR); ++ mask &= ~(1 << id); ++ mask = retu_disable_bogus_irqs(mask); ++ retu_write_reg(RETU_REG_IMR, mask); ++ spin_unlock_irqrestore(&retu_lock, flags); ++} ++ ++/* ++ * Acknowledge given RETU interrupt ++ */ ++void retu_ack_irq(int id) ++{ ++ retu_write_reg(RETU_REG_IDR, 1 << id); ++} ++ ++/* ++ * RETU interrupt handler. Only schedules the tasklet. ++ */ ++static irqreturn_t retu_irq_handler(int irq, void *dev_id) ++{ ++ tasklet_schedule(&retu_tasklet); ++ return IRQ_HANDLED; ++} ++ ++/* ++ * Tasklet handler ++ */ ++static void retu_tasklet_handler(unsigned long data) ++{ ++ struct retu_irq_handler_desc *hnd; ++ u16 id; ++ u16 im; ++ int i; ++ ++ for (;;) { ++ id = retu_read_reg(RETU_REG_IDR); ++ im = ~retu_read_reg(RETU_REG_IMR); ++ id &= im; ++ ++ if (!id) ++ break; ++ ++ for (i = 0; id != 0; i++, id >>= 1) { ++ if (!(id & 1)) ++ continue; ++ hnd = &retu_irq_handlers[i]; ++ if (hnd->func == NULL) { ++ /* Spurious retu interrupt - disable and ack it */ ++ printk(KERN_INFO "Spurious Retu interrupt " ++ "(id %d)\n", i); ++ retu_disable_irq(i); ++ retu_ack_irq(i); ++ continue; ++ } ++ hnd->func(hnd->arg); ++ /* ++ * Don't acknowledge the interrupt here ++ * It must be done explicitly ++ */ ++ } ++ } ++} ++ ++/* ++ * Register the handler for a given RETU interrupt source. ++ */ ++int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name) ++{ ++ struct retu_irq_handler_desc *hnd; ++ ++ if (irq_handler == NULL || id >= MAX_RETU_IRQ_HANDLERS || ++ name == NULL) { ++ printk(KERN_ERR PFX "Invalid arguments to %s\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ hnd = &retu_irq_handlers[id]; ++ if (hnd->func != NULL) { ++ printk(KERN_ERR PFX "IRQ %d already reserved\n", id); ++ return -EBUSY; ++ } ++ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n", ++ id, name); ++ hnd->func = irq_handler; ++ hnd->arg = arg; ++ strlcpy(hnd->name, name, sizeof(hnd->name)); ++ ++ retu_ack_irq(id); ++ retu_enable_irq(id); ++ ++ return 0; ++} ++ ++/* ++ * Unregister the handler for a given RETU interrupt source. ++ */ ++void retu_free_irq(int id) ++{ ++ struct retu_irq_handler_desc *hnd; ++ ++ if (id >= MAX_RETU_IRQ_HANDLERS) { ++ printk(KERN_ERR PFX "Invalid argument to %s\n", ++ __FUNCTION__); ++ return; ++ } ++ hnd = &retu_irq_handlers[id]; ++ if (hnd->func == NULL) { ++ printk(KERN_ERR PFX "IRQ %d already freed\n", id); ++ return; ++ } ++ ++ retu_disable_irq(id); ++ hnd->func = NULL; ++} ++ ++/** ++ * retu_power_off - Shut down power to system ++ * ++ * This function puts the system in power off state ++ */ ++static void retu_power_off(void) ++{ ++ /* Ignore power button state */ ++ retu_write_reg(RETU_REG_CC1, retu_read_reg(RETU_REG_CC1) | 2); ++ /* Expire watchdog immediately */ ++ retu_write_reg(RETU_REG_WATCHDOG, 0); ++ /* Wait for poweroff*/ ++ for (;;); ++} ++ ++/** ++ * retu_probe - Probe for Retu ASIC ++ * @dev: the Retu device ++ * ++ * Probe for the Retu ASIC and allocate memory ++ * for its device-struct if found ++ */ ++static int __devinit retu_probe(struct device *dev) ++{ ++ const struct omap_em_asic_bb5_config * em_asic_config; ++ int rev, ret; ++ ++ /* Prepare tasklet */ ++ tasklet_init(&retu_tasklet, retu_tasklet_handler, 0); ++ ++ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5, ++ struct omap_em_asic_bb5_config); ++ if (em_asic_config == NULL) { ++ printk(KERN_ERR PFX "Unable to retrieve config data\n"); ++ return -ENODATA; ++ } ++ ++ retu_irq_pin = em_asic_config->retu_irq_gpio; ++ ++ if ((ret = gpio_request(retu_irq_pin, "RETU irq")) < 0) { ++ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n"); ++ return ret; ++ } ++ ++ /* Set the pin as input */ ++ gpio_direction_input(retu_irq_pin); ++ ++ /* Rising edge triggers the IRQ */ ++ set_irq_type(gpio_to_irq(retu_irq_pin), IRQ_TYPE_EDGE_RISING); ++ ++ retu_initialized = 1; ++ ++ rev = retu_read_reg(RETU_REG_ASICR) & 0xff; ++ if (rev & (1 << 7)) ++ retu_is_vilma = 1; ++ ++ printk(KERN_INFO "%s v%d.%d found\n", retu_is_vilma ? "Vilma" : "Retu", ++ (rev >> 4) & 0x07, rev & 0x0f); ++ ++ /* Mask all RETU interrupts */ ++ retu_write_reg(RETU_REG_IMR, 0xffff); ++ ++ ret = request_irq(gpio_to_irq(retu_irq_pin), retu_irq_handler, 0, ++ "retu", 0); ++ if (ret < 0) { ++ printk(KERN_ERR PFX "Unable to register IRQ handler\n"); ++ gpio_free(retu_irq_pin); ++ return ret; ++ } ++ set_irq_wake(gpio_to_irq(retu_irq_pin), 1); ++ ++ /* Register power off function */ ++ pm_power_off = retu_power_off; ++ ++#ifdef CONFIG_CBUS_RETU_USER ++ /* Initialize user-space interface */ ++ if (retu_user_init() < 0) { ++ printk(KERN_ERR "Unable to initialize driver\n"); ++ free_irq(gpio_to_irq(retu_irq_pin), 0); ++ gpio_free(retu_irq_pin); ++ return ret; ++ } ++#endif ++ ++ return 0; ++} ++ ++static int retu_remove(struct device *dev) ++{ ++#ifdef CONFIG_CBUS_RETU_USER ++ retu_user_cleanup(); ++#endif ++ /* Mask all RETU interrupts */ ++ retu_write_reg(RETU_REG_IMR, 0xffff); ++ free_irq(gpio_to_irq(retu_irq_pin), 0); ++ gpio_free(retu_irq_pin); ++ tasklet_kill(&retu_tasklet); ++ ++ return 0; ++} ++ ++static void retu_device_release(struct device *dev) ++{ ++ complete(&device_release); ++} ++ ++static struct device_driver retu_driver = { ++ .name = "retu", ++ .bus = &platform_bus_type, ++ .probe = retu_probe, ++ .remove = retu_remove, ++}; ++ ++static struct platform_device retu_device = { ++ .name = "retu", ++ .id = -1, ++ .dev = { ++ .release = retu_device_release, ++ } ++}; ++ ++/** ++ * retu_init - initialise Retu driver ++ * ++ * Initialise the Retu driver and return 0 if everything worked ok ++ */ ++static int __init retu_init(void) ++{ ++ int ret = 0; ++ ++ printk(KERN_INFO "Retu/Vilma driver initialising\n"); ++ ++ init_completion(&device_release); ++ ++ if ((ret = driver_register(&retu_driver)) < 0) ++ return ret; ++ ++ if ((ret = platform_device_register(&retu_device)) < 0) { ++ driver_unregister(&retu_driver); ++ return ret; ++ } ++ return 0; ++} ++ ++/* ++ * Cleanup ++ */ ++static void __exit retu_exit(void) ++{ ++ platform_device_unregister(&retu_device); ++ driver_unregister(&retu_driver); ++ wait_for_completion(&device_release); ++} ++ ++EXPORT_SYMBOL(retu_request_irq); ++EXPORT_SYMBOL(retu_free_irq); ++EXPORT_SYMBOL(retu_enable_irq); ++EXPORT_SYMBOL(retu_disable_irq); ++EXPORT_SYMBOL(retu_ack_irq); ++EXPORT_SYMBOL(retu_read_reg); ++EXPORT_SYMBOL(retu_write_reg); ++ ++subsys_initcall(retu_init); ++module_exit(retu_exit); ++ ++MODULE_DESCRIPTION("Retu ASIC control"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen"); +diff --git a/drivers/cbus/retu.h b/drivers/cbus/retu.h +new file mode 100644 +index 0000000..c9e044c +--- /dev/null ++++ b/drivers/cbus/retu.h +@@ -0,0 +1,77 @@ ++/** ++ * drivers/cbus/retu.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and ++ * David Weinehall <david.weinehall@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_RETU_H ++#define __DRIVERS_CBUS_RETU_H ++ ++#include <linux/types.h> ++ ++/* Registers */ ++#define RETU_REG_ASICR 0x00 /* ASIC ID & revision */ ++#define RETU_REG_IDR 0x01 /* Interrupt ID */ ++#define RETU_REG_IMR 0x02 /* Interrupt mask */ ++#define RETU_REG_RTCDSR 0x03 /* RTC seconds register */ ++#define RETU_REG_RTCHMR 0x04 /* RTC hours and minutes register */ ++#define RETU_REG_RTCHMAR 0x05 /* RTC hours and minutes alarm and time set register */ ++#define RETU_REG_RTCCALR 0x06 /* RTC calibration register */ ++#define RETU_REG_ADCR 0x08 /* ADC result */ ++#define RETU_REG_ADCSCR 0x09 /* ADC sample ctrl */ ++#define RETU_REG_CC1 0x0d /* Common control register 1 */ ++#define RETU_REG_CC2 0x0e /* Common control register 2 */ ++#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */ ++#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */ ++#define RETU_REG_STATUS 0x16 /* Status register */ ++#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */ ++#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */ ++#define RETU_REG_MAX 0x1f ++ ++/* Interrupt sources */ ++#define RETU_INT_PWR 0 ++#define RETU_INT_CHAR 1 ++#define RETU_INT_RTCS 2 ++#define RETU_INT_RTCM 3 ++#define RETU_INT_RTCD 4 ++#define RETU_INT_RTCA 5 ++#define RETU_INT_HOOK 6 ++#define RETU_INT_HEAD 7 ++#define RETU_INT_ADCS 8 ++ ++#define MAX_RETU_IRQ_HANDLERS 16 ++ ++int retu_read_reg(int reg); ++void retu_write_reg(int reg, u16 val); ++void retu_set_clear_reg_bits(int reg, u16 set, u16 clear); ++int retu_read_adc(int channel); ++int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name); ++void retu_free_irq(int id); ++void retu_enable_irq(int id); ++void retu_disable_irq(int id); ++void retu_ack_irq(int id); ++ ++#ifdef CONFIG_CBUS_RETU_USER ++int retu_user_init(void); ++void retu_user_cleanup(void); ++#endif ++ ++extern spinlock_t retu_lock; ++ ++#endif /* __DRIVERS_CBUS_RETU_H */ +diff --git a/drivers/cbus/tahvo-usb.c b/drivers/cbus/tahvo-usb.c +new file mode 100644 +index 0000000..d8ad836 +--- /dev/null ++++ b/drivers/cbus/tahvo-usb.c +@@ -0,0 +1,777 @@ ++/** ++ * drivers/cbus/tahvo-usb.c ++ * ++ * Tahvo USB transeiver ++ * ++ * Copyright (C) 2005-2006 Nokia Corporation ++ * ++ * Parts copied from drivers/i2c/chips/isp1301_omap.c ++ * Copyright (C) 2004 Texas Instruments ++ * Copyright (C) 2004 David Brownell ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>, ++ * Tony Lindgren <tony@atomide.com>, and ++ * Timo Teräs <timo.teras@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/io.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/usb/ch9.h> ++#include <linux/usb/gadget.h> ++#include <linux/usb.h> ++#include <linux/usb/otg.h> ++#include <linux/i2c.h> ++#include <linux/workqueue.h> ++#include <linux/kobject.h> ++#include <linux/clk.h> ++#include <linux/mutex.h> ++ ++#include <asm/irq.h> ++#include <mach/usb.h> ++ ++#include "cbus.h" ++#include "tahvo.h" ++ ++#define DRIVER_NAME "tahvo-usb" ++ ++#define USBR_SLAVE_CONTROL (1 << 8) ++#define USBR_VPPVIO_SW (1 << 7) ++#define USBR_SPEED (1 << 6) ++#define USBR_REGOUT (1 << 5) ++#define USBR_MASTER_SW2 (1 << 4) ++#define USBR_MASTER_SW1 (1 << 3) ++#define USBR_SLAVE_SW (1 << 2) ++#define USBR_NSUSPEND (1 << 1) ++#define USBR_SEMODE (1 << 0) ++ ++/* bits in OTG_CTRL */ ++ ++/* Bits that are controlled by OMAP OTG and are read-only */ ++#define OTG_CTRL_OMAP_MASK (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\ ++ OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) ++/* Bits that are controlled by transceiver */ ++#define OTG_CTRL_XCVR_MASK (OTG_ASESSVLD|OTG_BSESSEND|\ ++ OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) ++/* Bits that are controlled by system */ ++#define OTG_CTRL_SYS_MASK (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\ ++ OTG_B_HNPEN|OTG_BUSDROP) ++ ++#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG) ++#error tahvo-otg.c does not work with OCHI yet! ++#endif ++ ++#define TAHVO_MODE_HOST 0 ++#define TAHVO_MODE_PERIPHERAL 1 ++ ++#ifdef CONFIG_USB_OTG ++#define TAHVO_MODE(tu) (tu)->tahvo_mode ++#elif defined(CONFIG_USB_GADGET_OMAP) ++#define TAHVO_MODE(tu) TAHVO_MODE_PERIPHERAL ++#else ++#define TAHVO_MODE(tu) TAHVO_MODE_HOST ++#endif ++ ++struct tahvo_usb { ++ struct platform_device *pt_dev; ++ struct otg_transceiver otg; ++ int vbus_state; ++ struct work_struct irq_work; ++ struct mutex serialize; ++#ifdef CONFIG_USB_OTG ++ int tahvo_mode; ++#endif ++}; ++static struct platform_device tahvo_usb_device; ++ ++/* ++ * --------------------------------------------------------------------------- ++ * OTG related functions ++ * ++ * These shoud be separated into omap-otg.c driver module, as they are used ++ * by various transceivers. These functions are needed in the UDC-only case ++ * as well. These functions are copied from GPL isp1301_omap.c ++ * --------------------------------------------------------------------------- ++ */ ++static struct platform_device *tahvo_otg_dev; ++ ++static irqreturn_t omap_otg_irq(int irq, void *arg) ++{ ++ struct platform_device *otg_dev = (struct platform_device *) arg; ++ struct tahvo_usb *tu = (struct tahvo_usb *) otg_dev->dev.driver_data; ++ u16 otg_irq; ++ ++ otg_irq = omap_readw(OTG_IRQ_SRC); ++ if (otg_irq & OPRT_CHG) { ++ omap_writew(OPRT_CHG, OTG_IRQ_SRC); ++ } else if (otg_irq & B_SRP_TMROUT) { ++ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); ++ } else if (otg_irq & B_HNP_FAIL) { ++ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); ++ } else if (otg_irq & A_SRP_DETECT) { ++ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC); ++ } else if (otg_irq & A_REQ_TMROUT) { ++ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); ++ } else if (otg_irq & A_VBUS_ERR) { ++ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); ++ } else if (otg_irq & DRIVER_SWITCH) { ++ if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) && ++ tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) { ++ /* role is host */ ++ usb_bus_start_enum(tu->otg.host, ++ tu->otg.host->otg_port); ++ } ++ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC); ++ } else ++ return IRQ_NONE; ++ ++ return IRQ_HANDLED; ++ ++} ++ ++static int omap_otg_init(void) ++{ ++ u32 l; ++ ++#ifdef CONFIG_USB_OTG ++ if (!tahvo_otg_dev) { ++ printk("tahvo-usb: no tahvo_otg_dev\n"); ++ return -ENODEV; ++ } ++#endif ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l &= ~OTG_IDLE_EN; ++ omap_writel(l, OTG_SYSCON_1); ++ udelay(100); ++ ++ /* some of these values are board-specific... */ ++ l = omap_readl(OTG_SYSCON_2); ++ l |= OTG_EN ++ /* for B-device: */ ++ | SRP_GPDATA /* 9msec Bdev D+ pulse */ ++ | SRP_GPDVBUS /* discharge after VBUS pulse */ ++ // | (3 << 24) /* 2msec VBUS pulse */ ++ /* for A-device: */ ++ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ ++ | SRP_DPW /* detect 167+ns SRP pulses */ ++ | SRP_DATA | SRP_VBUS; /* accept both kinds of SRP pulse */ ++ omap_writel(l, OTG_SYSCON_2); ++ ++ omap_writew(DRIVER_SWITCH | OPRT_CHG ++ | B_SRP_TMROUT | B_HNP_FAIL ++ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, ++ OTG_IRQ_EN); ++ l = omap_readl(OTG_SYSCON_2); ++ l |= OTG_EN; ++ omap_writel(l, OTG_SYSCON_2); ++ ++ return 0; ++} ++ ++static int omap_otg_probe(struct device *dev) ++{ ++ int ret; ++ ++ tahvo_otg_dev = to_platform_device(dev); ++ ret = omap_otg_init(); ++ if (ret != 0) { ++ printk(KERN_ERR "tahvo-usb: omap_otg_init failed\n"); ++ return ret; ++ } ++ ++ return request_irq(tahvo_otg_dev->resource[1].start, ++ omap_otg_irq, IRQF_DISABLED, DRIVER_NAME, ++ &tahvo_usb_device); ++} ++ ++static int omap_otg_remove(struct device *dev) ++{ ++ free_irq(tahvo_otg_dev->resource[1].start, &tahvo_usb_device); ++ tahvo_otg_dev = NULL; ++ ++ return 0; ++} ++ ++struct device_driver omap_otg_driver = { ++ .name = "omap_otg", ++ .bus = &platform_bus_type, ++ .probe = omap_otg_probe, ++ .remove = omap_otg_remove, ++}; ++ ++/* ++ * --------------------------------------------------------------------------- ++ * Tahvo related functions ++ * These are Nokia proprietary code, except for the OTG register settings, ++ * which are copied from isp1301.c ++ * --------------------------------------------------------------------------- ++ */ ++static ssize_t vbus_state_show(struct device *device, ++ struct device_attribute *attr, char *buf) ++{ ++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data; ++ return sprintf(buf, "%d\n", tu->vbus_state); ++} ++static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL); ++ ++int vbus_active = 0; ++ ++#if 0 ++ ++static int host_suspend(struct tahvo_usb *tu) ++{ ++ struct device *dev; ++ ++ if (!tu->otg.host) ++ return -ENODEV; ++ ++ /* Currently ASSUMES only the OTG port matters; ++ * other ports could be active... ++ */ ++ dev = tu->otg.host->controller; ++ return dev->driver->suspend(dev, PMSG_SUSPEND); ++} ++ ++static int host_resume(struct tahvo_usb *tu) ++{ ++ struct device *dev; ++ ++ if (!tu->otg.host) ++ return -ENODEV; ++ ++ dev = tu->otg.host->controller; ++ return dev->driver->resume(dev); ++} ++ ++#else ++ ++static int host_suspend(struct tahvo_usb *tu) ++{ ++ return 0; ++} ++ ++static int host_resume(struct tahvo_usb *tu) ++{ ++ return 0; ++} ++ ++#endif ++ ++static void check_vbus_state(struct tahvo_usb *tu) ++{ ++ int reg, prev_state; ++ ++ reg = tahvo_read_reg(TAHVO_REG_IDSR); ++ if (reg & 0x01) { ++ u32 l; ++ ++ vbus_active = 1; ++ switch (tu->otg.state) { ++ case OTG_STATE_B_IDLE: ++ /* Enable the gadget driver */ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_connect(tu->otg.gadget); ++ /* Set B-session valid and not B-sessio ended to indicate ++ * Vbus to be ok. */ ++ l = omap_readl(OTG_CTRL); ++ l &= ~OTG_BSESSEND; ++ l |= OTG_BSESSVLD; ++ omap_writel(l, OTG_CTRL); ++ ++ tu->otg.state = OTG_STATE_B_PERIPHERAL; ++ break; ++ case OTG_STATE_A_IDLE: ++ /* Session is now valid assuming the USB hub is driving Vbus */ ++ tu->otg.state = OTG_STATE_A_HOST; ++ host_resume(tu); ++ break; ++ default: ++ break; ++ } ++ printk("USB cable connected\n"); ++ } else { ++ switch (tu->otg.state) { ++ case OTG_STATE_B_PERIPHERAL: ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ break; ++ case OTG_STATE_A_HOST: ++ tu->otg.state = OTG_STATE_A_IDLE; ++ break; ++ default: ++ break; ++ } ++ printk("USB cable disconnected\n"); ++ vbus_active = 0; ++ } ++ ++ prev_state = tu->vbus_state; ++ tu->vbus_state = reg & 0x01; ++ if (prev_state != tu->vbus_state) ++ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state"); ++} ++ ++static void tahvo_usb_become_host(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ /* Clear system and transceiver controlled bits ++ * also mark the A-session is always valid */ ++ omap_otg_init(); ++ ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK); ++ l |= OTG_ASESSVLD; ++ omap_writel(l, OTG_CTRL); ++ ++ /* Power up the transceiver in USB host mode */ ++ tahvo_write_reg(TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND | ++ USBR_MASTER_SW2 | USBR_MASTER_SW1); ++ tu->otg.state = OTG_STATE_A_IDLE; ++ ++ check_vbus_state(tu); ++} ++ ++static void tahvo_usb_stop_host(struct tahvo_usb *tu) ++{ ++ host_suspend(tu); ++ tu->otg.state = OTG_STATE_A_IDLE; ++} ++ ++static void tahvo_usb_become_peripheral(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ /* Clear system and transceiver controlled bits ++ * and enable ID to mark peripheral mode and ++ * BSESSEND to mark no Vbus */ ++ omap_otg_init(); ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD); ++ l |= OTG_ID | OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ ++ /* Power up transceiver and set it in USB perhiperal mode */ ++ tahvo_write_reg(TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ ++ check_vbus_state(tu); ++} ++ ++static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ l = omap_readl(OTG_CTRL); ++ l &= ~OTG_BSESSVLD; ++ l |= OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ ++} ++ ++static void tahvo_usb_power_off(struct tahvo_usb *tu) ++{ ++ u32 l; ++ int id; ++ ++ /* Disable gadget controller if any */ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ ++ host_suspend(tu); ++ ++ /* Disable OTG and interrupts */ ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ id = OTG_ID; ++ else ++ id = 0; ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD); ++ l |= id | OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ omap_writew(0, OTG_IRQ_EN); ++ ++ l = omap_readl(OTG_SYSCON_2); ++ l &= ~OTG_EN; ++ omap_writel(l, OTG_SYSCON_2); ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l |= OTG_IDLE_EN; ++ omap_writel(l, OTG_SYSCON_1); ++ ++ /* Power off transceiver */ ++ tahvo_write_reg(TAHVO_REG_USBR, 0); ++ tu->otg.state = OTG_STATE_UNDEFINED; ++} ++ ++ ++static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA); ++ ++ if (dev->state == OTG_STATE_B_PERIPHERAL) { ++ /* REVISIT: Can Tahvo charge battery from VBUS? */ ++ } ++ return 0; ++} ++ ++static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ u16 w; ++ ++ dev_dbg(&tu->pt_dev->dev, "set_suspend\n"); ++ ++ w = tahvo_read_reg(TAHVO_REG_USBR); ++ if (suspend) ++ w &= ~USBR_NSUSPEND; ++ else ++ w |= USBR_NSUSPEND; ++ tahvo_write_reg(TAHVO_REG_USBR, w); ++ ++ return 0; ++} ++ ++static int tahvo_usb_start_srp(struct otg_transceiver *dev) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ u32 otg_ctrl; ++ ++ dev_dbg(&tu->pt_dev->dev, "start_srp\n"); ++ ++ if (!dev || tu->otg.state != OTG_STATE_B_IDLE) ++ return -ENODEV; ++ ++ otg_ctrl = omap_readl(OTG_CTRL); ++ if (!(otg_ctrl & OTG_BSESSEND)) ++ return -EINVAL; ++ ++ otg_ctrl |= OTG_B_BUSREQ; ++ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK; ++ omap_writel(otg_ctrl, OTG_CTRL); ++ tu->otg.state = OTG_STATE_B_SRP_INIT; ++ ++ return 0; ++} ++ ++static int tahvo_usb_start_hnp(struct otg_transceiver *otg) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "start_hnp\n"); ++#ifdef CONFIG_USB_OTG ++ /* REVISIT: Add this for OTG */ ++#endif ++ return -EINVAL; ++} ++ ++static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ u32 l; ++ ++ dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host); ++ ++ if (otg == NULL) ++ return -ENODEV; ++ ++#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP) ++ ++ mutex_lock(&tu->serialize); ++ ++ if (host == NULL) { ++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) ++ tahvo_usb_power_off(tu); ++ tu->otg.host = NULL; ++ mutex_unlock(&tu->serialize); ++ return 0; ++ } ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN); ++ omap_writel(l, OTG_SYSCON_1); ++ ++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) { ++ tu->otg.host = NULL; ++ tahvo_usb_become_host(tu); ++ } else ++ host_suspend(tu); ++ ++ tu->otg.host = host; ++ ++ mutex_unlock(&tu->serialize); ++#else ++ /* No host mode configured, so do not allow host controlled to be set */ ++ return -EINVAL; ++#endif ++ ++ return 0; ++} ++ ++static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget); ++ ++ if (!otg) ++ return -ENODEV; ++ ++#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP) ++ ++ mutex_lock(&tu->serialize); ++ ++ if (!gadget) { ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_power_off(tu); ++ tu->otg.gadget = NULL; ++ mutex_unlock(&tu->serialize); ++ return 0; ++ } ++ ++ tu->otg.gadget = gadget; ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_become_peripheral(tu); ++ ++ mutex_unlock(&tu->serialize); ++#else ++ /* No gadget mode configured, so do not allow host controlled to be set */ ++ return -EINVAL; ++#endif ++ ++ return 0; ++} ++ ++static void tahvo_usb_irq_work(struct work_struct *work) ++{ ++ struct tahvo_usb *tu = container_of(work, struct tahvo_usb, irq_work); ++ ++ mutex_lock(&tu->serialize); ++ check_vbus_state(tu); ++ mutex_unlock(&tu->serialize); ++} ++ ++static void tahvo_usb_vbus_interrupt(unsigned long arg) ++{ ++ struct tahvo_usb *tu = (struct tahvo_usb *) arg; ++ ++ tahvo_ack_irq(TAHVO_INT_VBUSON); ++ /* Seems we need this to acknowledge the interrupt */ ++ tahvo_read_reg(TAHVO_REG_IDSR); ++ schedule_work(&tu->irq_work); ++} ++ ++#ifdef CONFIG_USB_OTG ++static ssize_t otg_mode_show(struct device *device, ++ struct device_attribute *attr, char *buf) ++{ ++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data; ++ switch (tu->tahvo_mode) { ++ case TAHVO_MODE_HOST: ++ return sprintf(buf, "host\n"); ++ case TAHVO_MODE_PERIPHERAL: ++ return sprintf(buf, "peripheral\n"); ++ } ++ return sprintf(buf, "unknown\n"); ++} ++ ++static ssize_t otg_mode_store(struct device *device, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data; ++ int r; ++ ++ r = strlen(buf); ++ mutex_lock(&tu->serialize); ++ if (strncmp(buf, "host", 4) == 0) { ++ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_stop_peripheral(tu); ++ tu->tahvo_mode = TAHVO_MODE_HOST; ++ if (tu->otg.host) { ++ printk(KERN_INFO "Selected HOST mode: host controller present.\n"); ++ tahvo_usb_become_host(tu); ++ } else { ++ printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n"); ++ tahvo_usb_power_off(tu); ++ } ++ } else if (strncmp(buf, "peripheral", 10) == 0) { ++ if (tu->tahvo_mode == TAHVO_MODE_HOST) ++ tahvo_usb_stop_host(tu); ++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; ++ if (tu->otg.gadget) { ++ printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n"); ++ tahvo_usb_become_peripheral(tu); ++ } else { ++ printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n"); ++ tahvo_usb_power_off(tu); ++ } ++ } else ++ r = -EINVAL; ++ ++ mutex_unlock(&tu->serialize); ++ return r; ++} ++ ++static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store); ++#endif ++ ++static int tahvo_usb_probe(struct device *dev) ++{ ++ struct tahvo_usb *tu; ++ int ret; ++ ++ dev_dbg(dev, "probe\n"); ++ ++ /* Create driver data */ ++ tu = kmalloc(sizeof(*tu), GFP_KERNEL); ++ if (!tu) ++ return -ENOMEM; ++ memset(tu, 0, sizeof(*tu)); ++ tu->pt_dev = container_of(dev, struct platform_device, dev); ++#ifdef CONFIG_USB_OTG ++ /* Default mode */ ++#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT ++ tu->tahvo_mode = TAHVO_MODE_HOST; ++#else ++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; ++#endif ++#endif ++ ++ INIT_WORK(&tu->irq_work, tahvo_usb_irq_work); ++ mutex_init(&tu->serialize); ++ ++ /* Set initial state, so that we generate kevents only on ++ * state changes */ ++ tu->vbus_state = tahvo_read_reg(TAHVO_REG_IDSR) & 0x01; ++ ++ /* We cannot enable interrupt until omap_udc is initialized */ ++ ret = tahvo_request_irq(TAHVO_INT_VBUSON, tahvo_usb_vbus_interrupt, ++ (unsigned long) tu, "vbus_interrupt"); ++ if (ret != 0) { ++ kfree(tu); ++ printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n"); ++ return ret; ++ } ++ ++ /* Attributes */ ++ ret = device_create_file(dev, &dev_attr_vbus_state); ++#ifdef CONFIG_USB_OTG ++ ret |= device_create_file(dev, &dev_attr_otg_mode); ++#endif ++ if (ret) ++ printk(KERN_ERR "attribute creation failed: %d\n", ret); ++ ++ /* Create OTG interface */ ++ tahvo_usb_power_off(tu); ++ tu->otg.state = OTG_STATE_UNDEFINED; ++ tu->otg.label = DRIVER_NAME; ++ tu->otg.set_host = tahvo_usb_set_host; ++ tu->otg.set_peripheral = tahvo_usb_set_peripheral; ++ tu->otg.set_power = tahvo_usb_set_power; ++ tu->otg.set_suspend = tahvo_usb_set_suspend; ++ tu->otg.start_srp = tahvo_usb_start_srp; ++ tu->otg.start_hnp = tahvo_usb_start_hnp; ++ ++ ret = otg_set_transceiver(&tu->otg); ++ if (ret < 0) { ++ printk(KERN_ERR "Cannot register USB transceiver\n"); ++ kfree(tu); ++ tahvo_free_irq(TAHVO_INT_VBUSON); ++ return ret; ++ } ++ ++ dev->driver_data = tu; ++ ++ /* Act upon current vbus state once at startup. A vbus state irq may or ++ * may not be generated in addition to this. */ ++ schedule_work(&tu->irq_work); ++ return 0; ++} ++ ++static int tahvo_usb_remove(struct device *dev) ++{ ++ dev_dbg(dev, "remove\n"); ++ ++ tahvo_free_irq(TAHVO_INT_VBUSON); ++ flush_scheduled_work(); ++ otg_set_transceiver(0); ++ device_remove_file(dev, &dev_attr_vbus_state); ++#ifdef CONFIG_USB_OTG ++ device_remove_file(dev, &dev_attr_otg_mode); ++#endif ++ return 0; ++} ++ ++static struct device_driver tahvo_usb_driver = { ++ .name = "tahvo-usb", ++ .bus = &platform_bus_type, ++ .probe = tahvo_usb_probe, ++ .remove = tahvo_usb_remove, ++}; ++ ++static struct platform_device tahvo_usb_device = { ++ .name = "tahvo-usb", ++ .id = -1, ++}; ++ ++static int __init tahvo_usb_init(void) ++{ ++ int ret = 0; ++ ++ printk(KERN_INFO "Tahvo USB transceiver driver initializing\n"); ++ ret = driver_register(&tahvo_usb_driver); ++ if (ret) ++ return ret; ++ ret = platform_device_register(&tahvo_usb_device); ++ if (ret < 0) { ++ driver_unregister(&tahvo_usb_driver); ++ return ret; ++ } ++ ret = driver_register(&omap_otg_driver); ++ if (ret) { ++ platform_device_unregister(&tahvo_usb_device); ++ driver_unregister(&tahvo_usb_driver); ++ return ret; ++ } ++ return 0; ++} ++ ++subsys_initcall(tahvo_usb_init); ++ ++static void __exit tahvo_usb_exit(void) ++{ ++ driver_unregister(&omap_otg_driver); ++ platform_device_unregister(&tahvo_usb_device); ++ driver_unregister(&tahvo_usb_driver); ++} ++module_exit(tahvo_usb_exit); ++ ++MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs"); +diff --git a/drivers/cbus/tahvo-user.c b/drivers/cbus/tahvo-user.c +new file mode 100644 +index 0000000..873d648 +--- /dev/null ++++ b/drivers/cbus/tahvo-user.c +@@ -0,0 +1,405 @@ ++/** ++ * drivers/cbus/tahvo-user.c ++ * ++ * Tahvo user space interface functions ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/poll.h> ++#include <linux/list.h> ++#include <linux/spinlock.h> ++#include <linux/mutex.h> ++ ++#include <asm/uaccess.h> ++ ++#include "tahvo.h" ++ ++#include "user_retu_tahvo.h" ++ ++/* Maximum size of IRQ node buffer/pool */ ++#define TAHVO_MAX_IRQ_BUF_LEN 16 ++ ++#define PFX "tahvo-user: " ++ ++/* Bitmap for marking the interrupt sources as having the handlers */ ++static u32 tahvo_irq_bits; ++ ++/* For allowing only one user process to subscribe to the tahvo interrupts */ ++static struct file *tahvo_irq_subscr = NULL; ++ ++/* For poll and IRQ passing */ ++struct tahvo_irq { ++ u32 id; ++ struct list_head node; ++}; ++ ++static spinlock_t tahvo_irqs_lock; ++static struct tahvo_irq *tahvo_irq_block; ++static LIST_HEAD(tahvo_irqs); ++static LIST_HEAD(tahvo_irqs_reserve); ++ ++/* Wait queue - used when user wants to read the device */ ++DECLARE_WAIT_QUEUE_HEAD(tahvo_user_waitqueue); ++ ++/* Semaphore to protect irq subscription sequence */ ++static struct mutex tahvo_mutex; ++ ++/* This array specifies TAHVO register types (read/write/toggle) */ ++static const u8 tahvo_access_bits[] = { ++ 1, ++ 4, ++ 1, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 3, ++ 1 ++}; ++ ++/* ++ * The handler for all TAHVO interrupts. ++ * ++ * arg is the interrupt source in TAHVO. ++ */ ++static void tahvo_user_irq_handler(unsigned long arg) ++{ ++ struct tahvo_irq *irq; ++ ++ /* user has to re-enable the interrupt once ready ++ * for receiving them again */ ++ tahvo_disable_irq(arg); ++ tahvo_ack_irq(arg); ++ ++ spin_lock(&tahvo_irqs_lock); ++ if (list_empty(&tahvo_irqs_reserve)) { ++ spin_unlock(&tahvo_irqs_lock); ++ return; ++ } ++ irq = list_entry((&tahvo_irqs_reserve)->next, struct tahvo_irq, node); ++ irq->id = arg; ++ list_move_tail(&irq->node, &tahvo_irqs); ++ spin_unlock(&tahvo_irqs_lock); ++ ++ /* wake up waiting thread */ ++ wake_up(&tahvo_user_waitqueue); ++} ++ ++/* ++ * This routine sets up the interrupt handler and marks an interrupt source ++ * in TAHVO as a candidate for signal delivery to the user process. ++ */ ++static int tahvo_user_subscribe_to_irq(int id, struct file *filp) ++{ ++ int ret; ++ ++ mutex_lock(&tahvo_mutex); ++ if ((tahvo_irq_subscr != NULL) && (tahvo_irq_subscr != filp)) { ++ mutex_unlock(&tahvo_mutex); ++ return -EBUSY; ++ } ++ /* Store the file pointer of the first user process registering IRQs */ ++ tahvo_irq_subscr = filp; ++ mutex_unlock(&tahvo_mutex); ++ ++ if (tahvo_irq_bits & (1 << id)) ++ return 0; ++ ++ ret = tahvo_request_irq(id, tahvo_user_irq_handler, id, ""); ++ if (ret < 0) ++ return ret; ++ ++ /* Mark that this interrupt has a handler */ ++ tahvo_irq_bits |= 1 << id; ++ ++ return 0; ++} ++ ++/* ++ * Unregister all TAHVO interrupt handlers ++ */ ++static void tahvo_unreg_irq_handlers(void) ++{ ++ int id; ++ ++ if (!tahvo_irq_bits) ++ return; ++ ++ for (id = 0; id < MAX_TAHVO_IRQ_HANDLERS; id++) ++ if (tahvo_irq_bits & (1 << id)) ++ tahvo_free_irq(id); ++ ++ tahvo_irq_bits = 0; ++} ++ ++/* ++ * Write to TAHVO register. ++ * Returns 0 upon success, a negative error value otherwise. ++ */ ++static int tahvo_user_write_with_mask(u32 field, u16 value) ++{ ++ u32 mask; ++ u32 reg; ++ u_short tmp; ++ unsigned long flags; ++ ++ mask = MASK(field); ++ reg = REG(field); ++ ++ /* Detect bad mask and reg */ ++ if (mask == 0 || reg > TAHVO_REG_MAX || ++ tahvo_access_bits[reg] == READ_ONLY) { ++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n", ++ reg, mask); ++ return -EINVAL; ++ } ++ ++ /* Justify value according to mask */ ++ while (!(mask & 1)) { ++ value = value << 1; ++ mask = mask >> 1; ++ } ++ ++ spin_lock_irqsave(&tahvo_lock, flags); ++ if (tahvo_access_bits[reg] == TOGGLE) { ++ /* No need to detect previous content of register */ ++ tmp = 0; ++ } else { ++ /* Read current value of register */ ++ tmp = tahvo_read_reg(reg); ++ } ++ /* Generate a new value */ ++ tmp = (tmp & ~MASK(field)) | (value & MASK(field)); ++ /* Write data to TAHVO */ ++ tahvo_write_reg(reg, tmp); ++ spin_unlock_irqrestore(&tahvo_lock, flags); ++ ++ return 0; ++} ++ ++/* ++ * Read TAHVO register. ++ */ ++static u32 tahvo_user_read_with_mask(u32 field) ++{ ++ u_short value; ++ u32 mask, reg; ++ ++ mask = MASK(field); ++ reg = REG(field); ++ ++ /* Detect bad mask and reg */ ++ if (mask == 0 || reg > TAHVO_REG_MAX) { ++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n", ++ reg, mask); ++ return -EINVAL; ++ } ++ ++ /* Read the register */ ++ value = tahvo_read_reg(reg) & mask; ++ ++ /* Right justify value */ ++ while (!(mask & 1)) { ++ value = value >> 1; ++ mask = mask >> 1; ++ } ++ ++ return value; ++} ++ ++/* ++ * Close device ++ */ ++static int tahvo_close(struct inode *inode, struct file *filp) ++{ ++ /* Unregister all interrupts that have been registered */ ++ if (tahvo_irq_subscr == filp) { ++ tahvo_unreg_irq_handlers(); ++ tahvo_irq_subscr = NULL; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Device control (ioctl) ++ */ ++static int tahvo_ioctl(struct inode *inode, struct file *filp, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct retu_tahvo_write_parms par; ++ int ret; ++ ++ switch (cmd) { ++ case URT_IOCT_IRQ_SUBSCR: ++ return tahvo_user_subscribe_to_irq(arg, filp); ++ case TAHVO_IOCH_READ: ++ return tahvo_user_read_with_mask(arg); ++ case TAHVO_IOCX_WRITE: ++ ret = copy_from_user(&par, (void __user *) arg, sizeof(par)); ++ if (ret) ++ printk(KERN_ERR "copy_from_user failed: %d\n", ret); ++ par.result = tahvo_user_write_with_mask(par.field, par.value); ++ ret = copy_to_user((void __user *) arg, &par, sizeof(par)); ++ if (ret) ++ printk(KERN_ERR "copy_to_user failed: %d\n", ret); ++ break; ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++/* ++ * Read from device ++ */ ++static ssize_t tahvo_read(struct file *filp, char *buf, size_t count, ++ loff_t * offp) ++{ ++ struct tahvo_irq *irq; ++ ++ u32 nr, i; ++ ++ /* read not permitted if neither filp nor anyone has registered IRQs */ ++ if (tahvo_irq_subscr != filp) ++ return -EPERM; ++ ++ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0)) ++ return -EINVAL; ++ ++ nr = count / sizeof(u32); ++ ++ for (i = 0; i < nr; i++) { ++ unsigned long flags; ++ u32 irq_id; ++ int ret; ++ ++ ret = wait_event_interruptible(tahvo_user_waitqueue, ++ !list_empty(&tahvo_irqs)); ++ if (ret < 0) ++ return ret; ++ ++ spin_lock_irqsave(&tahvo_irqs_lock, flags); ++ irq = list_entry((&tahvo_irqs)->next, struct tahvo_irq, node); ++ irq_id = irq->id; ++ list_move(&irq->node, &tahvo_irqs_reserve); ++ spin_unlock_irqrestore(&tahvo_irqs_lock, flags); ++ ++ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id, ++ sizeof(irq_id)); ++ if (ret) ++ printk(KERN_ERR "copy_to_user failed: %d\n", ret); ++ } ++ ++ return count; ++} ++ ++/* ++ * Poll method ++ */ ++static unsigned tahvo_poll(struct file *filp, struct poll_table_struct *pt) ++{ ++ if (!list_empty(&tahvo_irqs)) ++ return POLLIN; ++ ++ poll_wait(filp, &tahvo_user_waitqueue, pt); ++ ++ if (!list_empty(&tahvo_irqs)) ++ return POLLIN; ++ else ++ return 0; ++} ++ ++static struct file_operations tahvo_user_fileops = { ++ .owner = THIS_MODULE, ++ .ioctl = tahvo_ioctl, ++ .read = tahvo_read, ++ .release = tahvo_close, ++ .poll = tahvo_poll ++}; ++ ++static struct miscdevice tahvo_device = { ++ .minor = MISC_DYNAMIC_MINOR, ++ .name = "tahvo", ++ .fops = &tahvo_user_fileops ++}; ++ ++/* ++ * Initialization ++ * ++ * @return 0 if successful, error value otherwise. ++ */ ++int tahvo_user_init(void) ++{ ++ struct tahvo_irq *irq; ++ int res, i; ++ ++ irq = kmalloc(sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN, GFP_KERNEL); ++ if (irq == NULL) { ++ printk(KERN_ERR PFX "kmalloc failed\n"); ++ return -ENOMEM; ++ } ++ memset(irq, 0, sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN); ++ for (i = 0; i < TAHVO_MAX_IRQ_BUF_LEN; i++) ++ list_add(&irq[i].node, &tahvo_irqs_reserve); ++ ++ tahvo_irq_block = irq; ++ ++ spin_lock_init(&tahvo_irqs_lock); ++ mutex_init(&tahvo_mutex); ++ ++ /* Request a misc device */ ++ res = misc_register(&tahvo_device); ++ if (res < 0) { ++ printk(KERN_ERR PFX "unable to register misc device for %s\n", ++ tahvo_device.name); ++ kfree(irq); ++ return res; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Cleanup. ++ */ ++void tahvo_user_cleanup(void) ++{ ++ /* Unregister our misc device */ ++ misc_deregister(&tahvo_device); ++ /* Unregister and disable all TAHVO interrupts */ ++ tahvo_unreg_irq_handlers(); ++ kfree(tahvo_irq_block); ++} ++ ++MODULE_DESCRIPTION("Tahvo ASIC user space functions"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mikko Ylinen"); +diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c +new file mode 100644 +index 0000000..e734c4c +--- /dev/null ++++ b/drivers/cbus/tahvo.c +@@ -0,0 +1,442 @@ ++/** ++ * drivers/cbus/tahvo.c ++ * ++ * Support functions for Tahvo ASIC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>, ++ * David Weinehall <david.weinehall@nokia.com>, and ++ * Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++ ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/device.h> ++#include <linux/miscdevice.h> ++#include <linux/poll.h> ++#include <linux/fs.h> ++#include <linux/irq.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/gpio.h> ++ ++#include <asm/uaccess.h> ++ ++#include <mach/mux.h> ++#include <mach/board.h> ++#include <mach/board-nokia.h> ++ ++#include "cbus.h" ++#include "tahvo.h" ++ ++#define TAHVO_ID 0x02 ++#define PFX "tahvo: " ++ ++static int tahvo_initialized; ++static int tahvo_irq_pin; ++static int tahvo_is_betty; ++ ++static struct tasklet_struct tahvo_tasklet; ++spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED; ++ ++static struct completion device_release; ++ ++struct tahvo_irq_handler_desc { ++ int (*func)(unsigned long); ++ unsigned long arg; ++ char name[8]; ++}; ++ ++static struct tahvo_irq_handler_desc tahvo_irq_handlers[MAX_TAHVO_IRQ_HANDLERS]; ++ ++/** ++ * tahvo_read_reg - Read a value from a register in Tahvo ++ * @reg: the register to read from ++ * ++ * This function returns the contents of the specified register ++ */ ++int tahvo_read_reg(int reg) ++{ ++ BUG_ON(!tahvo_initialized); ++ return cbus_read_reg(cbus_host, TAHVO_ID, reg); ++} ++ ++/** ++ * tahvo_write_reg - Write a value to a register in Tahvo ++ * @reg: the register to write to ++ * @reg: the value to write to the register ++ * ++ * This function writes a value to the specified register ++ */ ++void tahvo_write_reg(int reg, u16 val) ++{ ++ BUG_ON(!tahvo_initialized); ++ cbus_write_reg(cbus_host, TAHVO_ID, reg, val); ++} ++ ++/** ++ * tahvo_set_clear_reg_bits - set and clear register bits atomically ++ * @reg: the register to write to ++ * @bits: the bits to set ++ * ++ * This function sets and clears the specified Tahvo register bits atomically ++ */ ++void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear) ++{ ++ unsigned long flags; ++ u16 w; ++ ++ spin_lock_irqsave(&tahvo_lock, flags); ++ w = tahvo_read_reg(reg); ++ w &= ~clear; ++ w |= set; ++ tahvo_write_reg(reg, w); ++ spin_unlock_irqrestore(&tahvo_lock, flags); ++} ++ ++/* ++ * Disable given TAHVO interrupt ++ */ ++void tahvo_disable_irq(int id) ++{ ++ unsigned long flags; ++ u16 mask; ++ ++ spin_lock_irqsave(&tahvo_lock, flags); ++ mask = tahvo_read_reg(TAHVO_REG_IMR); ++ mask |= 1 << id; ++ tahvo_write_reg(TAHVO_REG_IMR, mask); ++ spin_unlock_irqrestore(&tahvo_lock, flags); ++} ++ ++/* ++ * Enable given TAHVO interrupt ++ */ ++void tahvo_enable_irq(int id) ++{ ++ unsigned long flags; ++ u16 mask; ++ ++ spin_lock_irqsave(&tahvo_lock, flags); ++ mask = tahvo_read_reg(TAHVO_REG_IMR); ++ mask &= ~(1 << id); ++ tahvo_write_reg(TAHVO_REG_IMR, mask); ++ spin_unlock_irqrestore(&tahvo_lock, flags); ++} ++ ++/* ++ * Acknowledge given TAHVO interrupt ++ */ ++void tahvo_ack_irq(int id) ++{ ++ tahvo_write_reg(TAHVO_REG_IDR, 1 << id); ++} ++ ++static int tahvo_7bit_backlight; ++ ++int tahvo_get_backlight_level(void) ++{ ++ int mask; ++ ++ if (tahvo_7bit_backlight) ++ mask = 0x7f; ++ else ++ mask = 0x0f; ++ return tahvo_read_reg(TAHVO_REG_LEDPWMR) & mask; ++} ++ ++int tahvo_get_max_backlight_level(void) ++{ ++ if (tahvo_7bit_backlight) ++ return 0x7f; ++ else ++ return 0x0f; ++} ++ ++void tahvo_set_backlight_level(int level) ++{ ++ int max_level; ++ ++ max_level = tahvo_get_max_backlight_level(); ++ if (level > max_level) ++ level = max_level; ++ tahvo_write_reg(TAHVO_REG_LEDPWMR, level); ++} ++ ++/* ++ * TAHVO interrupt handler. Only schedules the tasklet. ++ */ ++static irqreturn_t tahvo_irq_handler(int irq, void *dev_id) ++{ ++ tasklet_schedule(&tahvo_tasklet); ++ return IRQ_HANDLED; ++} ++ ++/* ++ * Tasklet handler ++ */ ++static void tahvo_tasklet_handler(unsigned long data) ++{ ++ struct tahvo_irq_handler_desc *hnd; ++ u16 id; ++ u16 im; ++ int i; ++ ++ for (;;) { ++ id = tahvo_read_reg(TAHVO_REG_IDR); ++ im = ~tahvo_read_reg(TAHVO_REG_IMR); ++ id &= im; ++ ++ if (!id) ++ break; ++ ++ for (i = 0; id != 0; i++, id >>= 1) { ++ if (!(id & 1)) ++ continue; ++ hnd = &tahvo_irq_handlers[i]; ++ if (hnd->func == NULL) { ++ /* Spurious tahvo interrupt - just ack it */ ++ printk(KERN_INFO "Spurious Tahvo interrupt " ++ "(id %d)\n", i); ++ tahvo_disable_irq(i); ++ tahvo_ack_irq(i); ++ continue; ++ } ++ hnd->func(hnd->arg); ++ /* ++ * Don't acknowledge the interrupt here ++ * It must be done explicitly ++ */ ++ } ++ } ++} ++ ++/* ++ * Register the handler for a given TAHVO interrupt source. ++ */ ++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name) ++{ ++ struct tahvo_irq_handler_desc *hnd; ++ ++ if (irq_handler == NULL || id >= MAX_TAHVO_IRQ_HANDLERS || ++ name == NULL) { ++ printk(KERN_ERR PFX "Invalid arguments to %s\n", ++ __FUNCTION__); ++ return -EINVAL; ++ } ++ hnd = &tahvo_irq_handlers[id]; ++ if (hnd->func != NULL) { ++ printk(KERN_ERR PFX "IRQ %d already reserved\n", id); ++ return -EBUSY; ++ } ++ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n", ++ id, name); ++ hnd->func = irq_handler; ++ hnd->arg = arg; ++ strlcpy(hnd->name, name, sizeof(hnd->name)); ++ ++ tahvo_ack_irq(id); ++ tahvo_enable_irq(id); ++ ++ return 0; ++} ++ ++/* ++ * Unregister the handler for a given TAHVO interrupt source. ++ */ ++void tahvo_free_irq(int id) ++{ ++ struct tahvo_irq_handler_desc *hnd; ++ ++ if (id >= MAX_TAHVO_IRQ_HANDLERS) { ++ printk(KERN_ERR PFX "Invalid argument to %s\n", ++ __FUNCTION__); ++ return; ++ } ++ hnd = &tahvo_irq_handlers[id]; ++ if (hnd->func == NULL) { ++ printk(KERN_ERR PFX "IRQ %d already freed\n", id); ++ return; ++ } ++ ++ tahvo_disable_irq(id); ++ hnd->func = NULL; ++} ++ ++/** ++ * tahvo_probe - Probe for Tahvo ASIC ++ * @dev: the Tahvo device ++ * ++ * Probe for the Tahvo ASIC and allocate memory ++ * for its device-struct if found ++ */ ++static int __devinit tahvo_probe(struct device *dev) ++{ ++ const struct omap_em_asic_bb5_config * em_asic_config; ++ int rev, id, ret; ++ ++ /* Prepare tasklet */ ++ tasklet_init(&tahvo_tasklet, tahvo_tasklet_handler, 0); ++ ++ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5, ++ struct omap_em_asic_bb5_config); ++ if (em_asic_config == NULL) { ++ printk(KERN_ERR PFX "Unable to retrieve config data\n"); ++ return -ENODATA; ++ } ++ ++ tahvo_initialized = 1; ++ ++ rev = tahvo_read_reg(TAHVO_REG_ASICR); ++ ++ id = (rev >> 8) & 0xff; ++ if (id == 0x03) { ++ if ((rev & 0xff) >= 0x50) ++ tahvo_7bit_backlight = 1; ++ } else if (id == 0x0b) { ++ tahvo_is_betty = 1; ++ tahvo_7bit_backlight = 1; ++ } else { ++ printk(KERN_ERR "Tahvo/Betty chip not found"); ++ return -ENODEV; ++ } ++ ++ printk(KERN_INFO "%s v%d.%d found\n", tahvo_is_betty ? "Betty" : "Tahvo", ++ (rev >> 4) & 0x0f, rev & 0x0f); ++ ++ tahvo_irq_pin = em_asic_config->tahvo_irq_gpio; ++ ++ if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) { ++ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n"); ++ return ret; ++ } ++ ++ /* Set the pin as input */ ++ gpio_direction_input(tahvo_irq_pin); ++ ++ /* Rising edge triggers the IRQ */ ++ set_irq_type(gpio_to_irq(tahvo_irq_pin), IRQ_TYPE_EDGE_RISING); ++ ++ /* Mask all TAHVO interrupts */ ++ tahvo_write_reg(TAHVO_REG_IMR, 0xffff); ++ ++ ret = request_irq(gpio_to_irq(tahvo_irq_pin), tahvo_irq_handler, 0, ++ "tahvo", 0); ++ if (ret < 0) { ++ printk(KERN_ERR PFX "Unable to register IRQ handler\n"); ++ gpio_free(tahvo_irq_pin); ++ return ret; ++ } ++#ifdef CONFIG_CBUS_TAHVO_USER ++ /* Initialize user-space interface */ ++ if (tahvo_user_init() < 0) { ++ printk(KERN_ERR "Unable to initialize driver\n"); ++ free_irq(gpio_to_irq(tahvo_irq_pin), 0); ++ gpio_free(tahvo_irq_pin); ++ return ret; ++ } ++#endif ++ return 0; ++} ++ ++static int tahvo_remove(struct device *dev) ++{ ++#ifdef CONFIG_CBUS_TAHVO_USER ++ tahvo_user_cleanup(); ++#endif ++ /* Mask all TAHVO interrupts */ ++ tahvo_write_reg(TAHVO_REG_IMR, 0xffff); ++ free_irq(gpio_to_irq(tahvo_irq_pin), 0); ++ gpio_free(tahvo_irq_pin); ++ tasklet_kill(&tahvo_tasklet); ++ ++ return 0; ++} ++ ++static void tahvo_device_release(struct device *dev) ++{ ++ complete(&device_release); ++} ++ ++static struct device_driver tahvo_driver = { ++ .name = "tahvo", ++ .bus = &platform_bus_type, ++ .probe = tahvo_probe, ++ .remove = tahvo_remove, ++}; ++ ++static struct platform_device tahvo_device = { ++ .name = "tahvo", ++ .id = -1, ++ .dev = { ++ .release = tahvo_device_release, ++ } ++}; ++ ++/** ++ * tahvo_init - initialise Tahvo driver ++ * ++ * Initialise the Tahvo driver and return 0 if everything worked ok ++ */ ++static int __init tahvo_init(void) ++{ ++ int ret = 0; ++ ++ printk(KERN_INFO "Tahvo/Betty driver initialising\n"); ++ ++ init_completion(&device_release); ++ ++ if ((ret = driver_register(&tahvo_driver)) < 0) ++ return ret; ++ ++ if ((ret = platform_device_register(&tahvo_device)) < 0) { ++ driver_unregister(&tahvo_driver); ++ return ret; ++ } ++ return 0; ++} ++ ++/* ++ * Cleanup ++ */ ++static void __exit tahvo_exit(void) ++{ ++ platform_device_unregister(&tahvo_device); ++ driver_unregister(&tahvo_driver); ++ wait_for_completion(&device_release); ++} ++ ++EXPORT_SYMBOL(tahvo_request_irq); ++EXPORT_SYMBOL(tahvo_free_irq); ++EXPORT_SYMBOL(tahvo_enable_irq); ++EXPORT_SYMBOL(tahvo_disable_irq); ++EXPORT_SYMBOL(tahvo_ack_irq); ++EXPORT_SYMBOL(tahvo_read_reg); ++EXPORT_SYMBOL(tahvo_write_reg); ++EXPORT_SYMBOL(tahvo_get_backlight_level); ++EXPORT_SYMBOL(tahvo_get_max_backlight_level); ++EXPORT_SYMBOL(tahvo_set_backlight_level); ++ ++subsys_initcall(tahvo_init); ++module_exit(tahvo_exit); ++ ++MODULE_DESCRIPTION("Tahvo ASIC control"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen"); +diff --git a/drivers/cbus/tahvo.h b/drivers/cbus/tahvo.h +new file mode 100644 +index 0000000..b7a8ee1 +--- /dev/null ++++ b/drivers/cbus/tahvo.h +@@ -0,0 +1,61 @@ ++/* ++ * drivers/cbus/tahvo.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and ++ * David Weinehall <david.weinehall@nokia.com> ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_TAHVO_H ++#define __DRIVERS_CBUS_TAHVO_H ++ ++#include <linux/types.h> ++ ++/* Registers */ ++#define TAHVO_REG_ASICR 0x00 /* ASIC ID & revision */ ++#define TAHVO_REG_IDR 0x01 /* Interrupt ID */ ++#define TAHVO_REG_IDSR 0x02 /* Interrupt status */ ++#define TAHVO_REG_IMR 0x03 /* Interrupt mask */ ++#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */ ++#define TAHVO_REG_USBR 0x06 /* USB control */ ++#define TAHVO_REG_MAX 0x0d ++ ++/* Interrupt sources */ ++#define TAHVO_INT_VBUSON 0 ++ ++#define MAX_TAHVO_IRQ_HANDLERS 8 ++ ++int tahvo_read_reg(int reg); ++void tahvo_write_reg(int reg, u16 val); ++void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear); ++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name); ++void tahvo_free_irq(int id); ++void tahvo_enable_irq(int id); ++void tahvo_disable_irq(int id); ++void tahvo_ack_irq(int id); ++int tahvo_get_backlight_level(void); ++int tahvo_get_max_backlight_level(void); ++void tahvo_set_backlight_level(int level); ++ ++#ifdef CONFIG_CBUS_TAHVO_USER ++int tahvo_user_init(void); ++void tahvo_user_cleanup(void); ++#endif ++ ++extern spinlock_t tahvo_lock; ++ ++#endif /* __DRIVERS_CBUS_TAHVO_H */ +diff --git a/drivers/cbus/user_retu_tahvo.h b/drivers/cbus/user_retu_tahvo.h +new file mode 100644 +index 0000000..a5c2190 +--- /dev/null ++++ b/drivers/cbus/user_retu_tahvo.h +@@ -0,0 +1,75 @@ ++/** ++ * drivers/cbus/user_retu_tahvo.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com> ++ * ++ * Definitions and types used by both retu-user and tahvo-user. ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _USER_RETU_TAHVO_H ++#define _USER_RETU_TAHVO_H ++ ++/* Chip IDs */ ++#define CHIP_RETU 1 ++#define CHIP_TAHVO 2 ++ ++/* Register access type bits */ ++#define READ_ONLY 1 ++#define WRITE_ONLY 2 ++#define READ_WRITE 3 ++#define TOGGLE 4 ++ ++#define MASK(field) ((u16)(field & 0xFFFF)) ++#define REG(field) ((u16)((field >> 16) & 0x3F)) ++ ++/*** IOCTL definitions. These should be kept in sync with user space **********/ ++ ++#define URT_IOC_MAGIC '`' ++ ++/* ++ * IOCTL function naming conventions: ++ * ================================== ++ * 0 -- No argument and return value ++ * S -- Set through a pointer ++ * T -- Tell directly with the argument value ++ * G -- Reply by setting through a pointer ++ * Q -- response is on the return value ++ * X -- S and G atomically ++ * H -- T and Q atomically ++ */ ++ ++/* General */ ++#define URT_IOCT_IRQ_SUBSCR _IO(URT_IOC_MAGIC, 0) ++ ++/* RETU */ ++#define RETU_IOCH_READ _IO(URT_IOC_MAGIC, 1) ++#define RETU_IOCX_WRITE _IO(URT_IOC_MAGIC, 2) ++#define RETU_IOCH_ADC_READ _IO(URT_IOC_MAGIC, 3) ++ ++/* TAHVO */ ++#define TAHVO_IOCH_READ _IO(URT_IOC_MAGIC, 4) ++#define TAHVO_IOCX_WRITE _IO(URT_IOC_MAGIC, 5) ++ ++/* This structure is used for writing RETU/TAHVO registers */ ++struct retu_tahvo_write_parms { ++ u32 field; ++ u16 value; ++ u8 result; ++}; ++ ++#endif +diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c +index 4487cc0..0aecaae 100644 +--- a/drivers/mmc/host/omap_hsmmc.c ++++ b/drivers/mmc/host/omap_hsmmc.c +@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = { + static int __init omap_hsmmc_init(void) + { + /* Register the MMC driver */ +- return platform_driver_register(&omap_hsmmc_driver); ++ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); + } + + static void __exit omap_hsmmc_cleanup(void) +diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c +index e75ba9b..7bcf409 100644 +--- a/drivers/spi/omap_uwire.c ++++ b/drivers/spi/omap_uwire.c +@@ -52,7 +52,7 @@ + #include <asm/mach-types.h> + + #include <mach/mux.h> +-#include <mach/omap730.h> /* OMAP730_IO_CONF registers */ ++#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ + + + /* FIXME address is now a platform device resource, +@@ -504,7 +504,7 @@ static int __init uwire_probe(struct platform_device *pdev) + } + clk_enable(uwire->ck); + +- if (cpu_is_omap730()) ++ if (cpu_is_omap7xx()) + uwire_idx_shift = 1; + else + uwire_idx_shift = 2; +@@ -573,8 +573,8 @@ static int __init omap_uwire_init(void) + } + if (machine_is_omap_perseus2()) { + /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ +- int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000; +- omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9); ++ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; ++ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); + } + + return platform_driver_probe(&uwire_driver, uwire_probe); +diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig +index 2407508..5620e92 100644 +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI + default y if ARCH_IXP4XX + default y if ARCH_W90X900 + default y if ARCH_AT91SAM9G45 ++ default y if ARCH_OMAP34XX + default PCI + + # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. +diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c +index 9835e07..44c208c 100644 +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1108,6 +1108,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver + #endif + ++#ifdef CONFIG_ARCH_OMAP34XX ++#include "ehci-omap.c" ++#define PLATFORM_DRIVER ehci_hcd_omap_driver ++#endif ++ + #ifdef CONFIG_PPC_PS3 + #include "ehci-ps3.c" + #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +new file mode 100644 +index 0000000..7ba8df3 +--- /dev/null ++++ b/drivers/usb/host/ehci-omap.c +@@ -0,0 +1,755 @@ ++/* ++ * ehci-omap.c - driver for USBHOST on OMAP 34xx processor ++ * ++ * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller ++ * Tested on OMAP3430 ES2.0 SDP ++ * ++ * Copyright (C) 2007-2008 Texas Instruments, Inc. ++ * Author: Vikram Pandita <vikram.pandita@ti.com> ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Contact: Felipe Balbi <felipe.balbi@nokia.com> ++ * ++ * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * TODO (last updated Feb 23rd, 2009): ++ * - add kernel-doc ++ * - enable AUTOIDLE ++ * - move DPLL5 programming to clock fw ++ * - add suspend/resume ++ * - move workarounds to board-files ++ */ ++ ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <linux/gpio.h> ++#include <mach/usb.h> ++ ++/* ++ * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES ++ * Use ehci_omap_readl()/ehci_omap_writel() functions ++ */ ++ ++/* TLL Register Set */ ++#define OMAP_USBTLL_REVISION (0x00) ++#define OMAP_USBTLL_SYSCONFIG (0x10) ++#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) ++#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) ++#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) ++#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) ++#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) ++ ++#define OMAP_USBTLL_SYSSTATUS (0x14) ++#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) ++ ++#define OMAP_USBTLL_IRQSTATUS (0x18) ++#define OMAP_USBTLL_IRQENABLE (0x1C) ++ ++#define OMAP_TLL_SHARED_CONF (0x30) ++#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) ++#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) ++#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) ++#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) ++#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) ++ ++#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) ++#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) ++#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) ++#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) ++#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) ++#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) ++ ++#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) ++#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) ++#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) ++#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) ++#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) ++#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) ++#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) ++#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) ++#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) ++ ++#define OMAP_TLL_CHANNEL_COUNT 3 ++#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 1) ++#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 2) ++#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 4) ++ ++/* UHH Register Set */ ++#define OMAP_UHH_REVISION (0x00) ++#define OMAP_UHH_SYSCONFIG (0x10) ++#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) ++#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) ++#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) ++#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) ++#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) ++#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) ++ ++#define OMAP_UHH_SYSSTATUS (0x14) ++#define OMAP_UHH_HOSTCONFIG (0x40) ++#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) ++#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) ++#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) ++#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) ++#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) ++#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) ++#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) ++#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) ++ ++#define OMAP_UHH_DEBUG_CSR (0x44) ++ ++/* EHCI Register Set */ ++#define EHCI_INSNREG05_ULPI (0xA4) ++#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 ++#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 ++#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 ++#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 ++#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 ++#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 ++ ++/*-------------------------------------------------------------------------*/ ++ ++static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val) ++{ ++ __raw_writel(val, base + reg); ++} ++ ++static inline u32 ehci_omap_readl(void __iomem *base, u32 reg) ++{ ++ return __raw_readl(base + reg); ++} ++ ++static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val) ++{ ++ __raw_writeb(val, base + reg); ++} ++ ++static inline u8 ehci_omap_readb(void __iomem *base, u8 reg) ++{ ++ return __raw_readb(base + reg); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++struct ehci_hcd_omap { ++ struct ehci_hcd *ehci; ++ struct device *dev; ++ ++ struct clk *usbhost_ick; ++ struct clk *usbhost2_120m_fck; ++ struct clk *usbhost1_48m_fck; ++ struct clk *usbtll_fck; ++ struct clk *usbtll_ick; ++ ++ /* FIXME the following two workarounds are ++ * board specific not silicon-specific so these ++ * should be moved to board-file instead. ++ * ++ * Maybe someone from TI will know better which ++ * board is affected and needs the workarounds ++ * to be applied ++ */ ++ ++ /* gpio for resetting phy */ ++ int reset_gpio_port[OMAP3_HS_USB_PORTS]; ++ ++ /* phy reset workaround */ ++ int phy_reset; ++ ++ /* desired phy_mode: TLL, PHY */ ++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; ++ ++ void __iomem *uhh_base; ++ void __iomem *tll_base; ++ void __iomem *ehci_base; ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) ++{ ++ unsigned reg; ++ int i; ++ ++ /* Program the 3 TLL channels upfront */ ++ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { ++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); ++ ++ /* Disable AutoIdle, BitStuffing and use SDR Mode */ ++ reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE ++ | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF ++ | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); ++ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); ++ } ++ ++ /* Program Common TLL register */ ++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); ++ reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON ++ | OMAP_TLL_SHARED_CONF_USB_DIVRATION ++ | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN); ++ reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; ++ ++ ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); ++ ++ /* Enable channels now */ ++ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { ++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); ++ ++ /* Enable only the reg that is needed */ ++ if (!(tll_channel_mask & 1<<i)) ++ continue; ++ ++ reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; ++ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); ++ ++ ehci_omap_writeb(omap->tll_base, ++ OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); ++ dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n", ++ i+1, ehci_omap_readb(omap->tll_base, ++ OMAP_TLL_ULPI_SCRATCH_REGISTER(i))); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* omap_start_ehc ++ * - Start the TI USBHOST controller ++ */ ++static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) ++{ ++ unsigned long timeout = jiffies + msecs_to_jiffies(1000); ++ u8 tll_ch_mask = 0; ++ unsigned reg = 0; ++ int ret = 0; ++ ++ dev_dbg(omap->dev, "starting TI EHCI USB Controller\n"); ++ ++ /* Enable Clocks for USBHOST */ ++ omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); ++ if (IS_ERR(omap->usbhost_ick)) { ++ ret = PTR_ERR(omap->usbhost_ick); ++ goto err_host_ick; ++ } ++ clk_enable(omap->usbhost_ick); ++ ++ omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); ++ if (IS_ERR(omap->usbhost2_120m_fck)) { ++ ret = PTR_ERR(omap->usbhost2_120m_fck); ++ goto err_host_120m_fck; ++ } ++ clk_enable(omap->usbhost2_120m_fck); ++ ++ omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); ++ if (IS_ERR(omap->usbhost1_48m_fck)) { ++ ret = PTR_ERR(omap->usbhost1_48m_fck); ++ goto err_host_48m_fck; ++ } ++ clk_enable(omap->usbhost1_48m_fck); ++ ++ if (omap->phy_reset) { ++ /* Refer: ISSUE1 */ ++ if (gpio_is_valid(omap->reset_gpio_port[0])) { ++ gpio_request(omap->reset_gpio_port[0], ++ "USB1 PHY reset"); ++ gpio_direction_output(omap->reset_gpio_port[0], 0); ++ } ++ ++ if (gpio_is_valid(omap->reset_gpio_port[1])) { ++ gpio_request(omap->reset_gpio_port[1], ++ "USB2 PHY reset"); ++ gpio_direction_output(omap->reset_gpio_port[1], 0); ++ } ++ ++ /* Hold the PHY in RESET for enough time till DIR is high */ ++ udelay(10); ++ } ++ ++ /* Configure TLL for 60Mhz clk for ULPI */ ++ omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); ++ if (IS_ERR(omap->usbtll_fck)) { ++ ret = PTR_ERR(omap->usbtll_fck); ++ goto err_tll_fck; ++ } ++ clk_enable(omap->usbtll_fck); ++ ++ omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); ++ if (IS_ERR(omap->usbtll_ick)) { ++ ret = PTR_ERR(omap->usbtll_ick); ++ goto err_tll_ick; ++ } ++ clk_enable(omap->usbtll_ick); ++ ++ /* perform TLL soft reset, and wait until reset is complete */ ++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, ++ OMAP_USBTLL_SYSCONFIG_SOFTRESET); ++ ++ /* Wait for TLL reset to complete */ ++ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) ++ & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { ++ cpu_relax(); ++ ++ if (time_after(jiffies, timeout)) { ++ dev_dbg(omap->dev, "operation timed out\n"); ++ ret = -EINVAL; ++ goto err_sys_status; ++ } ++ } ++ ++ dev_dbg(omap->dev, "TLL RESET DONE\n"); ++ ++ /* (1<<3) = no idle mode only for initial debugging */ ++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, ++ OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | ++ OMAP_USBTLL_SYSCONFIG_SIDLEMODE | ++ OMAP_USBTLL_SYSCONFIG_CACTIVITY); ++ ++ ++ /* Put UHH in NoIdle/NoStandby mode */ ++ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); ++ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP ++ | OMAP_UHH_SYSCONFIG_SIDLEMODE ++ | OMAP_UHH_SYSCONFIG_CACTIVITY ++ | OMAP_UHH_SYSCONFIG_MIDLEMODE); ++ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; ++ ++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); ++ ++ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); ++ ++ /* setup ULPI bypass and burst configurations */ ++ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN ++ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN ++ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); ++ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; ++ ++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN) ++ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; ++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN) ++ reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; ++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN) ++ reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; ++ ++ /* Bypass the TLL module for PHY mode operation */ ++ if (omap_rev() <= OMAP3430_REV_ES2_1) { ++ dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n"); ++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; ++ else ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; ++ } else { ++ dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); ++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; ++ else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; ++ ++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; ++ else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; ++ ++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; ++ else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; ++ ++ } ++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); ++ dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); ++ ++ ++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { ++ ++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; ++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; ++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; ++ ++ /* Enable UTMI mode for required TLL channels */ ++ omap_usb_utmi_init(omap, tll_ch_mask); ++ } ++ ++ if (omap->phy_reset) { ++ /* Refer ISSUE1: ++ * Hold the PHY in RESET for enough time till ++ * PHY is settled and ready ++ */ ++ udelay(10); ++ ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_set_value(omap->reset_gpio_port[0], 1); ++ ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_set_value(omap->reset_gpio_port[1], 1); ++ } ++ ++ return 0; ++ ++err_sys_status: ++ clk_disable(omap->usbtll_ick); ++ clk_put(omap->usbtll_ick); ++ ++err_tll_ick: ++ clk_disable(omap->usbtll_fck); ++ clk_put(omap->usbtll_fck); ++ ++err_tll_fck: ++ clk_disable(omap->usbhost1_48m_fck); ++ clk_put(omap->usbhost1_48m_fck); ++ ++ if (omap->phy_reset) { ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_free(omap->reset_gpio_port[0]); ++ ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_free(omap->reset_gpio_port[1]); ++ } ++ ++err_host_48m_fck: ++ clk_disable(omap->usbhost2_120m_fck); ++ clk_put(omap->usbhost2_120m_fck); ++ ++err_host_120m_fck: ++ clk_disable(omap->usbhost_ick); ++ clk_put(omap->usbhost_ick); ++ ++err_host_ick: ++ return ret; ++} ++ ++static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) ++{ ++ unsigned long timeout = jiffies + msecs_to_jiffies(100); ++ ++ dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); ++ ++ /* Reset OMAP modules for insmod/rmmod to work */ ++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, ++ OMAP_UHH_SYSCONFIG_SOFTRESET); ++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) ++ & (1 << 0))) { ++ cpu_relax(); ++ ++ if (time_after(jiffies, timeout)) ++ dev_dbg(omap->dev, "operation timed out\n"); ++ } ++ ++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) ++ & (1 << 1))) { ++ cpu_relax(); ++ ++ if (time_after(jiffies, timeout)) ++ dev_dbg(omap->dev, "operation timed out\n"); ++ } ++ ++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) ++ & (1 << 2))) { ++ cpu_relax(); ++ ++ if (time_after(jiffies, timeout)) ++ dev_dbg(omap->dev, "operation timed out\n"); ++ } ++ ++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); ++ ++ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) ++ & (1 << 0))) { ++ cpu_relax(); ++ ++ if (time_after(jiffies, timeout)) ++ dev_dbg(omap->dev, "operation timed out\n"); ++ } ++ ++ if (omap->usbtll_fck != NULL) { ++ clk_disable(omap->usbtll_fck); ++ clk_put(omap->usbtll_fck); ++ omap->usbtll_fck = NULL; ++ } ++ ++ if (omap->usbhost_ick != NULL) { ++ clk_disable(omap->usbhost_ick); ++ clk_put(omap->usbhost_ick); ++ omap->usbhost_ick = NULL; ++ } ++ ++ if (omap->usbhost1_48m_fck != NULL) { ++ clk_disable(omap->usbhost1_48m_fck); ++ clk_put(omap->usbhost1_48m_fck); ++ omap->usbhost1_48m_fck = NULL; ++ } ++ ++ if (omap->usbhost2_120m_fck != NULL) { ++ clk_disable(omap->usbhost2_120m_fck); ++ clk_put(omap->usbhost2_120m_fck); ++ omap->usbhost2_120m_fck = NULL; ++ } ++ ++ if (omap->usbtll_ick != NULL) { ++ clk_disable(omap->usbtll_ick); ++ clk_put(omap->usbtll_ick); ++ omap->usbtll_ick = NULL; ++ } ++ ++ if (omap->phy_reset) { ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_free(omap->reset_gpio_port[0]); ++ ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_free(omap->reset_gpio_port[1]); ++ } ++ ++ dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static const struct hc_driver ehci_omap_hc_driver; ++ ++/* configure so an HC device and id are always provided */ ++/* always called with process context; sleeping is OK */ ++ ++/** ++ * ehci_hcd_omap_probe - initialize TI-based HCDs ++ * ++ * Allocates basic resources for this USB host controller, and ++ * then invokes the start() method for the HCD associated with it ++ * through the hotplug entry's driver_data. ++ */ ++static int ehci_hcd_omap_probe(struct platform_device *pdev) ++{ ++ struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; ++ struct ehci_hcd_omap *omap; ++ struct resource *res; ++ struct usb_hcd *hcd; ++ ++ int irq = platform_get_irq(pdev, 0); ++ int ret = -ENODEV; ++ ++ if (!pdata) { ++ dev_dbg(&pdev->dev, "missing platform_data\n"); ++ goto err_pdata; ++ } ++ ++ if (usb_disabled()) ++ goto err_disabled; ++ ++ omap = kzalloc(sizeof(*omap), GFP_KERNEL); ++ if (!omap) { ++ ret = -ENOMEM; ++ goto err_create_hcd; ++ } ++ ++ hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, ++ dev_name(&pdev->dev)); ++ if (!hcd) { ++ dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret); ++ ret = -ENOMEM; ++ goto err_create_hcd; ++ } ++ ++ platform_set_drvdata(pdev, omap); ++ omap->dev = &pdev->dev; ++ omap->phy_reset = pdata->phy_reset; ++ omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; ++ omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; ++ omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; ++ omap->port_mode[0] = pdata->port_mode[0]; ++ omap->port_mode[1] = pdata->port_mode[1]; ++ omap->port_mode[2] = pdata->port_mode[2]; ++ omap->ehci = hcd_to_ehci(hcd); ++ omap->ehci->sbrn = 0x20; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ hcd->rsrc_start = res->start; ++ hcd->rsrc_len = resource_size(res); ++ ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) { ++ dev_err(&pdev->dev, "EHCI ioremap failed\n"); ++ ret = -ENOMEM; ++ goto err_ioremap; ++ } ++ ++ /* we know this is the memory we want, no need to ioremap again */ ++ omap->ehci->caps = hcd->regs; ++ omap->ehci_base = hcd->regs; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ omap->uhh_base = ioremap(res->start, resource_size(res)); ++ if (!omap->uhh_base) { ++ dev_err(&pdev->dev, "UHH ioremap failed\n"); ++ ret = -ENOMEM; ++ goto err_uhh_ioremap; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); ++ omap->tll_base = ioremap(res->start, resource_size(res)); ++ if (!omap->tll_base) { ++ dev_err(&pdev->dev, "TLL ioremap failed\n"); ++ ret = -ENOMEM; ++ goto err_tll_ioremap; ++ } ++ ++ ret = omap_start_ehc(omap, hcd); ++ if (ret) { ++ dev_dbg(&pdev->dev, "failed to start ehci\n"); ++ goto err_start; ++ } ++ ++ omap->ehci->regs = hcd->regs ++ + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); ++ ++ /* cache this readonly data; minimize chip reads */ ++ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); ++ ++ /* SET 1 micro-frame Interrupt interval */ ++ writel(readl(&omap->ehci->regs->command) | (1 << 16), ++ &omap->ehci->regs->command); ++ ++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); ++ if (ret) { ++ dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); ++ goto err_add_hcd; ++ } ++ ++ return 0; ++ ++err_add_hcd: ++ omap_stop_ehc(omap, hcd); ++ ++err_start: ++ iounmap(omap->tll_base); ++ ++err_tll_ioremap: ++ iounmap(omap->uhh_base); ++ ++err_uhh_ioremap: ++ iounmap(hcd->regs); ++ ++err_ioremap: ++ usb_put_hcd(hcd); ++ ++err_create_hcd: ++err_disabled: ++err_pdata: ++ return ret; ++} ++ ++/* may be called without controller electrically present */ ++/* may be called with controller, bus, and devices active */ ++ ++/** ++ * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs ++ * @pdev: USB Host Controller being removed ++ * ++ * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking ++ * the HCD's stop() method. It is always called from a thread ++ * context, normally "rmmod", "apmd", or something similar. ++ */ ++static int ehci_hcd_omap_remove(struct platform_device *pdev) ++{ ++ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); ++ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); ++ ++ usb_remove_hcd(hcd); ++ omap_stop_ehc(omap, hcd); ++ iounmap(hcd->regs); ++ iounmap(omap->tll_base); ++ iounmap(omap->uhh_base); ++ usb_put_hcd(hcd); ++ ++ return 0; ++} ++ ++static void ehci_hcd_omap_shutdown(struct platform_device *pdev) ++{ ++ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); ++ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); ++ ++ if (hcd->driver->shutdown) ++ hcd->driver->shutdown(hcd); ++} ++ ++static struct platform_driver ehci_hcd_omap_driver = { ++ .probe = ehci_hcd_omap_probe, ++ .remove = ehci_hcd_omap_remove, ++ .shutdown = ehci_hcd_omap_shutdown, ++ /*.suspend = ehci_hcd_omap_suspend, */ ++ /*.resume = ehci_hcd_omap_resume, */ ++ .driver = { ++ .name = "ehci-omap", ++ } ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++static const struct hc_driver ehci_omap_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "OMAP-EHCI Host Controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ ++ /* ++ * generic hardware linkage ++ */ ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ /* ++ * basic lifecycle operations ++ */ ++ .reset = ehci_init, ++ .start = ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ /* ++ * managing i/o requests and associated device resources ++ */ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, ++ ++ /* ++ * scheduling support ++ */ ++ .get_frame_number = ehci_get_frame, ++ ++ /* ++ * root hub support ++ */ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++ .bus_suspend = ehci_bus_suspend, ++ .bus_resume = ehci_bus_resume, ++ ++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, ++}; ++ ++MODULE_ALIAS("platform:omap-ehci"); ++MODULE_AUTHOR("Texas Instruments, Inc."); ++MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); ++ +diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c +index f16e421..6f957ce 100644 +--- a/drivers/video/omap/dispc.c ++++ b/drivers/video/omap/dispc.c +@@ -204,6 +204,7 @@ static u32 inline dispc_read_reg(int idx) + /* Select RFBI or bypass mode */ + static void enable_rfbi_mode(int enable) + { ++ void __iomem *rfbi_control; + u32 l; + + l = dispc_read_reg(DISPC_CONTROL); +@@ -216,9 +217,15 @@ static void enable_rfbi_mode(int enable) + dispc_write_reg(DISPC_CONTROL, l); + + /* Set bypass mode in RFBI module */ +- l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL)); ++ rfbi_control = ioremap(RFBI_CONTROL, SZ_1K); ++ if (!rfbi_control) { ++ pr_err("Unable to ioremap rfbi_control\n"); ++ return; ++ } ++ l = __raw_readl(rfbi_control); + l |= enable ? 0 : (1 << 1); +- __raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL)); ++ __raw_writel(l, rfbi_control); ++ iounmap(rfbi_control); + } + + static void set_lcd_data_lines(int data_lines) +@@ -1367,6 +1374,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, + int r; + u32 l; + struct lcd_panel *panel = fbdev->panel; ++ void __iomem *ram_fw_base; + int tmo = 10000; + int skip_init = 0; + int i; +@@ -1441,7 +1449,13 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, + } + + /* L3 firewall setting: enable access to OCM RAM */ +- __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); ++ ram_fw_base = ioremap(0x68005000, SZ_1K); ++ if (!ram_fw_base) { ++ dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n"); ++ goto fail1; ++ } ++ __raw_writel(0x402000b0, ram_fw_base + 0xa0); ++ iounmap(ram_fw_base); + + if ((r = alloc_palette_ram()) < 0) + goto fail2; diff --git a/target/linux/omap35xx/patches-2.6.32/003-enable_dss2_beagleboard.patch b/target/linux/omap35xx/patches-2.6.32/003-enable_dss2_beagleboard.patch new file mode 100644 index 0000000..6ef4cbf --- /dev/null +++ b/target/linux/omap35xx/patches-2.6.32/003-enable_dss2_beagleboard.patch @@ -0,0 +1,195 @@ +--- a/arch/arm/mach-omap2/board-omap3beagle.c 2009-11-27 02:38:04.000000000 +0100 ++++ b/arch/arm/mach-omap2/board-omap3beagle.c 2009-11-27 00:36:10.511677848 +0100 +@@ -23,6 +23,7 @@ + #include <linux/gpio.h> + #include <linux/input.h> + #include <linux/gpio_keys.h> ++#include <linux/omapfb.h> + + #include <linux/mtd/mtd.h> + #include <linux/mtd/partitions.h> +@@ -44,6 +45,7 @@ + #include <mach/mux.h> + #include <mach/usb.h> + #include <mach/timer-gp.h> ++#include <mach/display.h> + + #include "mmc-twl4030.h" + +@@ -106,6 +108,92 @@ static struct platform_device omap3beagl + .resource = &omap3beagle_nand_resource, + }; + ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->reset_gpio != -1) ++ gpio_set_value(dssdev->reset_gpio, 0); ++} ++ ++static struct omap_dss_device beagle_dvi_device = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .driver_name = "generic_panel", ++ .phy.dpi.data_lines = 24, ++ .reset_gpio = 170, ++ .platform_enable = beagle_enable_dvi, ++ .platform_disable = beagle_disable_dvi, ++}; ++ ++static int beagle_panel_enable_tv(struct omap_dss_device *dssdev) ++{ ++ return 0; ++} ++ ++static void beagle_panel_disable_tv(struct omap_dss_device *dssdev) ++{ ++} ++ ++static struct omap_dss_device beagle_tv_device = { ++ .name = "tv", ++ .driver_name = "venc", ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .platform_enable = beagle_panel_enable_tv, ++ .platform_disable = beagle_panel_disable_tv, ++}; ++ ++static struct omap_dss_device *beagle_dss_devices[] = { ++ &beagle_dvi_device, ++ &beagle_tv_device, ++}; ++ ++static struct omap_dss_board_info beagle_dss_data = { ++ .num_devices = ARRAY_SIZE(beagle_dss_devices), ++ .devices = beagle_dss_devices, ++ .default_device = &beagle_dvi_device, ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static struct regulator_consumer_supply beagle_vdda_dac_supply = { ++ .supply = "vdda_dac", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static struct regulator_consumer_supply beagle_vdds_dsi_supply = { ++ .supply = "vdds_dsi", ++ .dev = &beagle_dss_device.dev, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); ++ if (r < 0) { ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++ return; ++ } ++ ++ gpio_direction_output(beagle_dvi_device.reset_gpio, 0); ++} ++ + #include "sdram-micron-mt46h32m32lf-6.h" + + static struct twl4030_hsmmc_info mmc[] = { +@@ -117,15 +205,6 @@ static struct twl4030_hsmmc_info mmc[] = + {} /* Terminator */ + }; + +-static struct platform_device omap3_beagle_lcd_device = { +- .name = "omap3beagle_lcd", +- .id = -1, +-}; +- +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct regulator_consumer_supply beagle_vmmc1_supply = { + .supply = "vmmc", + }; +@@ -181,15 +260,6 @@ static struct twl4030_gpio_platform_data + .setup = beagle_twl_gpio_setup, + }; + +-static struct regulator_consumer_supply beagle_vdac_supply = { +- .supply = "vdac", +- .dev = &omap3_beagle_lcd_device.dev, +-}; +- +-static struct regulator_consumer_supply beagle_vdvi_supply = { +- .supply = "vdvi", +- .dev = &omap3_beagle_lcd_device.dev, +-}; + + /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ + static struct regulator_init_data beagle_vmmc1 = { +@@ -226,13 +296,14 @@ static struct regulator_init_data beagle + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, ++ .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, +- .consumer_supplies = &beagle_vdac_supply, ++ .consumer_supplies = &beagle_vdda_dac_supply, + }; + + /* VPLL2 for digital video outputs */ +@@ -247,7 +318,7 @@ static struct regulator_init_data beagle + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, +- .consumer_supplies = &beagle_vdvi_supply, ++ .consumer_supplies = &beagle_vdds_dsi_supply, + }; + + static struct twl4030_usb_data beagle_usb_data = { +@@ -340,7 +411,6 @@ static struct platform_device keys_gpio + }; + + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, + }; + + static void __init omap3_beagle_init_irq(void) +@@ -357,7 +427,7 @@ static void __init omap3_beagle_init_irq + } + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, ++ &beagle_dss_device, + &leds_gpio, + &keys_gpio, + }; +@@ -420,9 +490,6 @@ static void __init omap3_beagle_init(voi + omap_serial_init(); + + omap_cfg_reg(J25_34XX_GPIO170); +- gpio_request(170, "DVI_nPD"); +- /* REVISIT leave DVI powered down until it's needed ... */ +- gpio_direction_output(170, true); + + usb_musb_init(); + usb_ehci_init(&ehci_pdata); diff --git a/target/linux/omap35xx/patches-2.6.32/004-compile_fix_dispc.patch b/target/linux/omap35xx/patches-2.6.32/004-compile_fix_dispc.patch new file mode 100644 index 0000000..7b8554d --- /dev/null +++ b/target/linux/omap35xx/patches-2.6.32/004-compile_fix_dispc.patch @@ -0,0 +1,13 @@ +--- a/drivers/video/omap2/dss/dispc.c 2009-11-29 18:41:44.396505079 +0100 ++++ b/drivers/video/omap2/dss/dispc.c 2009-11-09 00:19:03.466830538 +0100 +@@ -3077,8 +3077,8 @@ static void _omap_dispc_initial_config(v + REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); + + /* L3 firewall setting: enable access to OCM RAM */ +- if (cpu_is_omap24xx()) +- __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); ++// if (cpu_is_omap24xx()) ++// __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); + + _dispc_setup_color_conv_coef(); + |