2 files changed, 91 insertions, 0 deletions
diff --git a/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb b/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
new file mode 100644
index 0000000..5572dae
--- /dev/null
+++ b/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+usb_led=''
+usb_device=''
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+usb_led_set_timer() {
+	led_set_attr "${usb_led}" 'trigger' 'timer'
+	led_set_attr "${usb_led}" 'delay_on' "$1"
+	led_set_attr "${usb_led}" 'delay_off' "$2"
+}
+
+usb_led_on() {
+	led_set_attr "${usb_led}" 'trigger' 'none'
+	led_set_attr "${usb_led}" 'brightness' 255
+}
+
+usb_led_off() {
+	led_set_attr "${usb_led}" 'trigger' 'none'
+	led_set_attr "${usb_led}" 'brightness' 0
+}
+
+get_usb_led() {
+	local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+
+	case "${hardware}" in
+	 'Linksys WRT350N v2')
+		usb_led='wrt350nv2:green:usb'
+		usb_device='1-1:1.0'
+		;;
+	esac;
+}
+
+get_usb_led
+
+case "${ACTION}" in
+ add)
+	# update LEDs
+	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_on
+	;;
+ remove)
+	# update LEDs
+	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_off
+	;;
+esac
diff --git a/target/linux/orion/base-files/etc/uci-defaults/hardware b/target/linux/orion/base-files/etc/uci-defaults/hardware
new file mode 100644
index 0000000..9c97496
--- /dev/null
+++ b/target/linux/orion/base-files/etc/uci-defaults/hardware
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+#
+# This script sets system defaults for the hardware on firstboot
+#
+
+local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+
+wrt350nv2_default() {
+# leds
+	uci batch <<__EOF
+set system.power_led=led
+set system.power_led.name='Power LED (green)'
+set system.power_led.sysfs='wrt350nv2:green:power'
+set system.power_led.default='1'
+set system.wifi_led=led
+set system.wifi_led.name='Wireless LED (green)'
+set system.wifi_led.sysfs='wrt350nv2:green:wireless'
+set system.wifi_led.trigger='netdev'
+set system.wifi_led.dev='wlan0'
+set system.wifi_led.mode='link tx rx'
+set system.wifi_led.default='0'
+commit system
+__EOF
+}
+
+case "${hardware}" in
+ 'Linksys WRT350N v2')
+	wrt350nv2_default
+	;;
+esac