diff options
Diffstat (limited to 'target/linux/orion/patches')
6 files changed, 214 insertions, 0 deletions
diff --git a/target/linux/orion/patches/100-wrt350nv2_openwrt_partition_map.patch b/target/linux/orion/patches/100-wrt350nv2_openwrt_partition_map.patch new file mode 100644 index 0000000..5e2dc25 --- /dev/null +++ b/target/linux/orion/patches/100-wrt350nv2_openwrt_partition_map.patch @@ -0,0 +1,32 @@ +--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c ++++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c +@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n + { + .name = "kernel", + .offset = 0x00000000, +- .size = 0x00760000, ++ .size = 0x00100000, // change to kernel mtd size here (1/3) + }, { + .name = "rootfs", +- .offset = 0x001a0000, +- .size = 0x005c0000, ++ .offset = 0x00100000, // change to kernel mtd size here (2/3) ++ .size = 0x00650000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size> + }, { + .name = "lang", + .offset = 0x00760000, +@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n + .name = "u-boot", + .offset = 0x007c0000, + .size = 0x00040000, ++ }, { ++ .name = "eRcOmM_do_not_touch", ++ .offset = 0x00750000, ++ .size = 0x00010000, // erasesize ++ }, { ++ .name = "image", // for sysupgrade ++ .offset = 0x00000000, ++ .size = 0x00750000, + }, + }; + diff --git a/target/linux/orion/patches/101-wnr854t_partition_map.patch b/target/linux/orion/patches/101-wnr854t_partition_map.patch new file mode 100644 index 0000000..9757d45 --- /dev/null +++ b/target/linux/orion/patches/101-wnr854t_partition_map.patch @@ -0,0 +1,13 @@ +--- a/arch/arm/mach-orion5x/wnr854t-setup.c ++++ b/arch/arm/mach-orion5x/wnr854t-setup.c +@@ -66,6 +66,10 @@ static struct mtd_partition wnr854t_nor_ + .name = "uboot", + .offset = 0x00760000, + .size = 0x00040000, ++ }, { ++ .name = "image", // for sysupgrade ++ .offset = 0x00000000, ++ .size = 0x00760000, + }, + }; + diff --git a/target/linux/orion/patches/200-dt2_board_support.patch b/target/linux/orion/patches/200-dt2_board_support.patch new file mode 100644 index 0000000..91909ab --- /dev/null +++ b/target/linux/orion/patches/200-dt2_board_support.patch @@ -0,0 +1,26 @@ +--- a/arch/arm/mach-orion5x/Kconfig ++++ b/arch/arm/mach-orion5x/Kconfig +@@ -16,6 +16,13 @@ config MACH_RD88F5182 + Say 'Y' here if you want your kernel to support the + Marvell Orion-NAS (88F5182) RD2 + ++config MACH_DT2 ++ bool "Freecom DataTank Gateway" ++ select I2C_BOARDINFO ++ help ++ Say 'Y' here if you want your kernel to support the ++ Freecom DataTank Gateway ++ + config MACH_KUROBOX_PRO + bool "KuroBox Pro" + select I2C_BOARDINFO +--- a/arch/arm/mach-orion5x/Makefile ++++ b/arch/arm/mach-orion5x/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MACH_BIGDISK) += d2net-setu + obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o + obj-$(CONFIG_MACH_MSS2) += mss2-setup.o + obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o ++obj-$(CONFIG_MACH_DT2) += dt2-setup.o + obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o + obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o + obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o diff --git a/target/linux/orion/patches/210-wn802t_support.patch b/target/linux/orion/patches/210-wn802t_support.patch new file mode 100644 index 0000000..7fd908b --- /dev/null +++ b/target/linux/orion/patches/210-wn802t_support.patch @@ -0,0 +1,78 @@ +--- a/arch/arm/mach-orion5x/Kconfig ++++ b/arch/arm/mach-orion5x/Kconfig +@@ -139,10 +139,13 @@ config MACH_MSS2 + Maxtor Shared Storage II platform. + + config MACH_WNR854T +- bool "Netgear WNR854T" ++ bool "Netgear WNR854T / WN802T" + help + Say 'Y' here if you want your kernel to support the +- Netgear WNR854T platform. ++ Netgear WNR854T or WN802T platform. ++ ++config MACH_WN802T ++ def_bool MACH_WNR854T + + config MACH_RD88F5181L_GE + bool "Marvell Orion-VoIP GE Reference Design" +--- a/arch/arm/mach-orion5x/wnr854t-setup.c ++++ b/arch/arm/mach-orion5x/wnr854t-setup.c +@@ -115,6 +115,15 @@ static struct dsa_platform_data wnr854t_ + .chip = &wnr854t_switch_chip_data, + }; + ++static struct dsa_chip_data wn802t_switch_chip_data = { ++ .port_names[2] = "wan", ++ .port_names[3] = "cpu", ++}; ++ ++static struct dsa_platform_data wn802t_switch_plat_data = { ++ .nr_chips = 1, ++ .chip = &wn802t_switch_chip_data, ++}; + static void __init wnr854t_init(void) + { + /* +@@ -128,7 +137,12 @@ static void __init wnr854t_init(void) + * Configure peripherals. + */ + orion5x_eth_init(&wnr854t_eth_data); +- orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); ++ ++ if (machine_is_wn802t()) ++ orion5x_eth_switch_init(&wn802t_switch_plat_data, NO_IRQ); ++ else ++ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); ++ + orion5x_uart0_init(); + + orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, +@@ -167,7 +181,7 @@ static struct hw_pci wnr854t_pci __initd + + static int __init wnr854t_pci_init(void) + { +- if (machine_is_wnr854t()) ++ if (machine_is_wnr854t() || machine_is_wn802t()) + pci_common_init(&wnr854t_pci); + + return 0; +@@ -178,6 +192,18 @@ MACHINE_START(WNR854T, "Netgear WNR854T" + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ + .atag_offset = 0x100, + .init_machine = wnr854t_init, ++ .map_io = orion5x_map_io, ++ .init_early = orion5x_init_early, ++ .init_irq = orion5x_init_irq, ++ .timer = &orion5x_timer, ++ .fixup = tag_fixup_mem32, ++ .restart = orion5x_restart, ++MACHINE_END ++ ++MACHINE_START(WN802T, "Netgear WN802T") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .atag_offset = 0x100, ++ .init_machine = wnr854t_init, + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion5x_init_irq, diff --git a/target/linux/orion/patches/400-fix-section-mismatch-warnings.patch b/target/linux/orion/patches/400-fix-section-mismatch-warnings.patch new file mode 100644 index 0000000..84ca91f --- /dev/null +++ b/target/linux/orion/patches/400-fix-section-mismatch-warnings.patch @@ -0,0 +1,31 @@ +--- a/arch/arm/mach-orion5x/common.c ++++ b/arch/arm/mach-orion5x/common.c +@@ -192,7 +192,7 @@ void __init orion5x_init_early(void) + + int orion5x_tclk; + +-int __init orion5x_find_tclk(void) ++static __init int orion5x_find_tclk(void) + { + u32 dev, rev; + +@@ -204,7 +204,7 @@ int __init orion5x_find_tclk(void) + return 166666667; + } + +-static void orion5x_timer_init(void) ++static __init void orion5x_timer_init(void) + { + orion5x_tclk = orion5x_find_tclk(); + +--- a/arch/arm/mach-orion5x/addr-map.c ++++ b/arch/arm/mach-orion5x/addr-map.c +@@ -76,7 +76,7 @@ static int __init cpu_win_can_remap(cons + /* + * Description of the windows needed by the platform code + */ +-static struct __initdata orion_addr_map_cfg addr_map_cfg = { ++static struct orion_addr_map_cfg addr_map_cfg __initdata = { + .num_wins = 8, + .cpu_win_can_remap = cpu_win_can_remap, + .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, diff --git a/target/linux/orion/patches/a01-dt2-fixes-for-3.3.patch b/target/linux/orion/patches/a01-dt2-fixes-for-3.3.patch new file mode 100644 index 0000000..c101f14 --- /dev/null +++ b/target/linux/orion/patches/a01-dt2-fixes-for-3.3.patch @@ -0,0 +1,34 @@ +--- a/arch/arm/mach-orion5x/dt2-setup.c ++++ b/arch/arm/mach-orion5x/dt2-setup.c +@@ -146,7 +146,7 @@ void __init dt2_pci_preinit(void) + } + } + +-static int __init dt2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + { + int irq; + +@@ -383,8 +383,7 @@ __tagtable(ATAG_MV_UBOOT, parse_tag_dt2_ + * + * Vanilla kernel should use "tag_fixup_mem32" function. + */ +-void __init openwrt_fixup(struct machine_desc *mdesc, struct tag *t, +- char **from, struct meminfo *meminfo) ++void __init openwrt_fixup(struct tag *t, char **from, struct meminfo *meminfo) + { + char *p = NULL; + static char openwrt_init_tag[] __initdata = " init=/etc/preinit"; +@@ -437,10 +436,11 @@ void __init openwrt_fixup(struct machine + /* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */ + MACHINE_START(DT2, "Freecom DataTank Gateway") + /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */ +- .boot_params = 0x00000100, ++ .atag_offset = 0x100, + .init_machine = dt2_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = openwrt_fixup, //tag_fixup_mem32, ++ .restart = orion5x_restart, + MACHINE_END |