diff options
Diffstat (limited to 'target/linux/oxnas/patches-3.14')
13 files changed, 495 insertions, 0 deletions
diff --git a/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch new file mode 100644 index 0000000..ed01fe1 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch @@ -0,0 +1,62 @@ +Index: linux-3.14.18/arch/arm/include/asm/glue-cache.h +=================================================================== +--- linux-3.14.18.orig/arch/arm/include/asm/glue-cache.h ++++ linux-3.14.18/arch/arm/include/asm/glue-cache.h +@@ -156,11 +156,19 @@ extern inline void nop_dma_unmap_area(co + #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) + #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) + #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST + #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) + + #define dmac_map_area __glue(_CACHE,_dma_map_area) + #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) + #define dmac_flush_range __glue(_CACHE,_dma_flush_range) ++#else ++#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) ++ ++#define dmac_map_area __glue(fiq,_dma_map_area) ++#define dmac_unmap_area __glue(fiq,_dma_unmap_area) ++#define dmac_flush_range __glue(fiq,_dma_flush_range) ++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */ + #endif + + #endif +Index: linux-3.14.18/arch/arm/mm/Kconfig +=================================================================== +--- linux-3.14.18.orig/arch/arm/mm/Kconfig ++++ linux-3.14.18/arch/arm/mm/Kconfig +@@ -843,6 +843,17 @@ config DMA_CACHE_RWFO + in hardware, other workarounds are needed (e.g. cache + maintenance broadcasting in software via FIQ). + ++config DMA_CACHE_FIQ_BROADCAST ++ bool "Enable fiq broadcast DMA cache maintenance" ++ depends on CPU_V6K && SMP ++ select FIQ ++ help ++ The Snoop Control Unit on ARM11MPCore does not detect the ++ cache maintenance operations and the dma_{map,unmap}_area() ++ functions may leave stale cache entries on other CPUs. By ++ enabling this option, fiq broadcast in the ARMv6 ++ DMA cache maintenance functions is performed. ++ + config OUTER_CACHE + bool + +Index: linux-3.14.18/arch/arm/mm/flush.c +=================================================================== +--- linux-3.14.18.orig/arch/arm/mm/flush.c ++++ linux-3.14.18/arch/arm/mm/flush.c +@@ -291,7 +291,11 @@ void flush_dcache_page(struct page *page + + mapping = page_mapping(page); + ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST + if (!cache_ops_need_broadcast() && ++#else ++ if ( ++#endif + mapping && !page_mapped(page)) + clear_bit(PG_dcache_clean, &page->flags); + else { diff --git a/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch new file mode 100644 index 0000000..3b3947c --- /dev/null +++ b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch @@ -0,0 +1,99 @@ +Index: linux-3.13.7/drivers/reset/core.c +=================================================================== +--- linux-3.13.7.orig/drivers/reset/core.c ++++ linux-3.13.7/drivers/reset/core.c +@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_ + EXPORT_SYMBOL_GPL(reset_control_deassert); + + /** +- * reset_control_get - Lookup and obtain a reference to a reset controller. +- * @dev: device to be reset by the controller ++ * of_reset_control_get - Lookup and obtain a reference to a reset controller. ++ * @node: device to be reset by the controller + * @id: reset line name + * + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * Use of id names is optional. + */ +-struct reset_control *reset_control_get(struct device *dev, const char *id) ++struct reset_control *of_reset_control_get(struct device_node *node, ++ const char *id) + { + struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER); + struct reset_controller_dev *r, *rcdev; +@@ -144,13 +145,10 @@ struct reset_control *reset_control_get( + int rstc_id; + int ret; + +- if (!dev) +- return ERR_PTR(-EINVAL); +- + if (id) +- index = of_property_match_string(dev->of_node, ++ index = of_property_match_string(node, + "reset-names", id); +- ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells", ++ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells", + index, &args); + if (ret) + return ERR_PTR(ret); +@@ -185,12 +183,35 @@ struct reset_control *reset_control_get( + return ERR_PTR(-ENOMEM); + } + +- rstc->dev = dev; + rstc->rcdev = rcdev; + rstc->id = rstc_id; + + return rstc; + } ++EXPORT_SYMBOL_GPL(of_reset_control_get); ++ ++/** ++ * reset_control_get - Lookup and obtain a reference to a reset controller. ++ * @dev: device to be reset by the controller ++ * @id: reset line name ++ * ++ * Returns a struct reset_control or IS_ERR() condition containing errno. ++ * ++ * Use of id names is optional. ++ */ ++struct reset_control *reset_control_get(struct device *dev, const char *id) ++{ ++ struct reset_control *rstc; ++ ++ if (!dev) ++ return ERR_PTR(-EINVAL); ++ ++ rstc = of_reset_control_get(dev->of_node, id); ++ if (!IS_ERR(rstc)) ++ rstc->dev = dev; ++ ++ return rstc; ++} + EXPORT_SYMBOL_GPL(reset_control_get); + + /** +Index: linux-3.13.7/include/linux/reset.h +=================================================================== +--- linux-3.13.7.orig/include/linux/reset.h ++++ linux-3.13.7/include/linux/reset.h +@@ -1,6 +1,8 @@ + #ifndef _LINUX_RESET_H_ + #define _LINUX_RESET_H_ + ++#include <linux/of.h> ++ + struct device; + struct reset_control; + +@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_con + int reset_control_assert(struct reset_control *rstc); + int reset_control_deassert(struct reset_control *rstc); + ++struct reset_control *of_reset_control_get(struct device_node *node, ++ const char *id); + struct reset_control *reset_control_get(struct device *dev, const char *id); + void reset_control_put(struct reset_control *rstc); + struct reset_control *devm_reset_control_get(struct device *dev, const char *id); diff --git a/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch new file mode 100644 index 0000000..c08754d --- /dev/null +++ b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch @@ -0,0 +1,12 @@ +Index: linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt +=================================================================== +--- linux-3.14.18.orig/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -65,6 +65,7 @@ onnn ON Semiconductor Corp. + panasonic Panasonic Corporation + phytec PHYTEC Messtechnik GmbH + picochip Picochip Ltd ++plxtech PLX Technology, Inc. + powervr PowerVR (deprecated, use img) + qca Qualcomm Atheros, Inc. + qcom Qualcomm Technologies, Inc diff --git a/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch new file mode 100644 index 0000000..b6e2efb --- /dev/null +++ b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch @@ -0,0 +1,79 @@ +Index: linux-3.14.18/arch/arm/Kconfig +=================================================================== +--- linux-3.14.18.orig/arch/arm/Kconfig ++++ linux-3.14.18/arch/arm/Kconfig +@@ -367,6 +367,17 @@ config ARCH_VERSATILE + help + This enables support for ARM Ltd Versatile board. + ++config ARCH_OXNAS ++ bool "Oxford Semiconductor 815/820/825 NAS SoC" ++ select ARCH_REQUIRE_GPIOLIB ++ select CLKDEV_LOOKUP ++ select GENERIC_CLOCKEVENTS ++ select COMMON_CLK ++ select MIGHT_HAVE_PCI ++ select ARCH_HAS_RESET_CONTROLLER ++ help ++ This enables support for Oxsemi 815/820/825 NAS SoC ++ + config ARCH_AT91 + bool "Atmel AT91" + select ARCH_REQUIRE_GPIOLIB +@@ -999,6 +1010,8 @@ source "arch/arm/mach-omap2/Kconfig" + + source "arch/arm/mach-orion5x/Kconfig" + ++source "arch/arm/mach-oxnas/Kconfig" ++ + source "arch/arm/mach-picoxcell/Kconfig" + + source "arch/arm/mach-pxa/Kconfig" +Index: linux-3.14.18/arch/arm/Makefile +=================================================================== +--- linux-3.14.18.orig/arch/arm/Makefile ++++ linux-3.14.18/arch/arm/Makefile +@@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire + machine-$(CONFIG_ARCH_OMAP1) += omap1 + machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 + machine-$(CONFIG_ARCH_ORION5X) += orion5x ++machine-$(CONFIG_ARCH_OXNAS) += oxnas + machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell + machine-$(CONFIG_ARCH_PXA) += pxa + machine-$(CONFIG_ARCH_REALVIEW) += realview +Index: linux-3.14.18/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,6 +233,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + am43x-epos-evm.dtb \ + dra7-evm.dtb + dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ +Index: linux-3.14.18/arch/arm/tools/mach-types +=================================================================== +--- linux-3.14.18.orig/arch/arm/tools/mach-types ++++ linux-3.14.18/arch/arm/tools/mach-types +@@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127 + edb9307a MACH_EDB9307A EDB9307A 1128 + omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 + vstms MACH_VSTMS VSTMS 1140 ++ox820 MACH_OX820 OX820 1152 + micro9m MACH_MICRO9M MICRO9M 1169 + bug MACH_BUG BUG 1179 + at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202 +Index: linux-3.14.18/drivers/clk/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/clk/Makefile ++++ linux-3.14.18/drivers/clk/Makefile +@@ -19,6 +19,7 @@ obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1 + obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o + obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o ++obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o + obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o + obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o + obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o diff --git a/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch new file mode 100644 index 0000000..1eb74de --- /dev/null +++ b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch @@ -0,0 +1,24 @@ +Index: linux-3.14.18/drivers/clocksource/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/clocksource/Kconfig ++++ linux-3.14.18/drivers/clocksource/Kconfig +@@ -140,3 +140,9 @@ config VF_PIT_TIMER + bool + help + Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. ++ ++config CLKSRC_RPS_TIMER ++ def_bool y if ARCH_OXNAS ++ select CLKSRC_MMIO ++ help ++ This option enables support for the oxnas rps timers. +Index: linux-3.14.18/drivers/clocksource/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/clocksource/Makefile ++++ linux-3.14.18/drivers/clocksource/Makefile +@@ -37,3 +37,5 @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arc + obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o + obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o + obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o ++ ++obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o diff --git a/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch new file mode 100644 index 0000000..6406a3f --- /dev/null +++ b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch @@ -0,0 +1,40 @@ +Index: linux-3.14.18/drivers/irqchip/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/irqchip/Kconfig ++++ linux-3.14.18/drivers/irqchip/Kconfig +@@ -10,6 +10,11 @@ config ARM_GIC + config GIC_NON_BANKED + bool + ++config PLXTECH_RPS ++ def_bool y if ARHC_OXNAS ++ depends on ARCH_OXNAS ++ select IRQ_DOMAIN ++ + config ARM_NVIC + bool + select IRQ_DOMAIN +Index: linux-3.14.18/drivers/irqchip/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/irqchip/Makefile ++++ linux-3.14.18/drivers/irqchip/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc. + obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o + obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o + obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o ++obj-$(CONFIG_PLXTECH_RPS) += irq-rps.o + obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o + obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o + obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o +Index: linux-3.14.18/drivers/irqchip/irq-gic.c +=================================================================== +--- linux-3.14.18.orig/drivers/irqchip/irq-gic.c ++++ linux-3.14.18/drivers/irqchip/irq-gic.c +@@ -1015,6 +1015,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400", + IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); + IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); + IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); ++IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init); + IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); + IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); + diff --git a/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch new file mode 100644 index 0000000..60caca3 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch @@ -0,0 +1,32 @@ +Index: linux-3.14.18/drivers/pinctrl/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/pinctrl/Kconfig ++++ linux-3.14.18/drivers/pinctrl/Kconfig +@@ -87,6 +87,15 @@ config PINCTRL_AT91 + help + Say Y here to enable the at91 pinctrl driver + ++config PINCTRL_OXNAS ++ bool "OXNAS pinctrl driver" ++ depends on OF ++ depends on ARCH_OXNAS ++ select PINMUX ++ select PINCONF ++ help ++ Say Y here to enable the oxnas pinctrl driver ++ + config PINCTRL_BAYTRAIL + bool "Intel Baytrail GPIO pin control" + depends on GPIOLIB && ACPI && X86 +Index: linux-3.14.18/drivers/pinctrl/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/pinctrl/Makefile ++++ linux-3.14.18/drivers/pinctrl/Makefile +@@ -67,6 +67,7 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl- + obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o + obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o + obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o ++obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o + + obj-$(CONFIG_PLAT_ORION) += mvebu/ + obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ diff --git a/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch new file mode 100644 index 0000000..ca0ccb8 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch @@ -0,0 +1,23 @@ +Index: linux-3.14.18/drivers/pci/host/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/pci/host/Kconfig ++++ linux-3.14.18/drivers/pci/host/Kconfig +@@ -33,4 +33,9 @@ config PCI_RCAR_GEN2 + There are 3 internal PCI controllers available with a single + built-in EHCI/OHCI host controller present on each one. + ++config PCI_OXNAS ++ bool "PLX Oxnas PCIe controller" ++ depends on ARCH_OXNAS ++ select PCIEPORTBUS ++ + endmenu +Index: linux-3.14.18/drivers/pci/host/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/pci/host/Makefile ++++ linux-3.14.18/drivers/pci/host/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o + obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o + obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o + obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o ++obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o diff --git a/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch new file mode 100644 index 0000000..820d70b --- /dev/null +++ b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch @@ -0,0 +1,20 @@ +Index: linux-3.14.18/drivers/reset/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/reset/Kconfig ++++ linux-3.14.18/drivers/reset/Kconfig +@@ -11,3 +11,7 @@ menuconfig RESET_CONTROLLER + via GPIOs or SoC-internal reset controller modules. + + If unsure, say no. ++ ++config RESET_CONTROLLER_OXNAS ++ bool ++ select RESET_CONTROLLER +Index: linux-3.14.18/drivers/reset/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/reset/Makefile ++++ linux-3.14.18/drivers/reset/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_RESET_CONTROLLER) += core.o ++obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o + obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o diff --git a/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch new file mode 100644 index 0000000..a5a1b02 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch @@ -0,0 +1,28 @@ +Index: linux-3.14.18/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/mtd/nand/Kconfig ++++ linux-3.14.18/drivers/mtd/nand/Kconfig +@@ -510,4 +510,12 @@ config MTD_NAND_XWAY + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + ++config MTD_NAND_OXNAS ++ tristate "Support for NAND on Plxtech NAS782X SoC" ++ depends on ARCH_OXNAS ++ select MTD_NAND_PLATFORM ++ help ++ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached ++ to the STATIC Unit. ++ + endif # MTD_NAND +Index: linux-3.14.18/drivers/mtd/nand/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/mtd/nand/Makefile ++++ linux-3.14.18/drivers/mtd/nand/Makefile +@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 + obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ ++obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o + + nand-objs := nand_base.o nand_bbt.o diff --git a/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch new file mode 100644 index 0000000..d203734 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch @@ -0,0 +1,30 @@ +Index: linux-3.14.18/drivers/ata/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/ata/Kconfig ++++ linux-3.14.18/drivers/ata/Kconfig +@@ -330,6 +330,13 @@ config SATA_VITESSE + + If unsure, say N. + ++config SATA_OXNAS ++ tristate "PLXTECH NAS782X SATA support" ++ help ++ This option enables support for Nas782x Serial ATA controller. ++ ++ If unsure, say N. ++ + comment "PATA SFF controllers with BMDMA" + + config PATA_ALI +Index: linux-3.14.18/drivers/ata/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/ata/Makefile ++++ linux-3.14.18/drivers/ata/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o + obj-$(CONFIG_SATA_ULI) += sata_uli.o + obj-$(CONFIG_SATA_VIA) += sata_via.o + obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o ++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o + + # SFF PATA w/ BMDMA + obj-$(CONFIG_PATA_ALI) += pata_ali.o diff --git a/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch new file mode 100644 index 0000000..94e62a9 --- /dev/null +++ b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch @@ -0,0 +1,30 @@ +Index: linux-3.14.18/drivers/usb/host/Kconfig +=================================================================== +--- linux-3.14.18.orig/drivers/usb/host/Kconfig ++++ linux-3.14.18/drivers/usb/host/Kconfig +@@ -273,6 +273,13 @@ config USB_OCTEON_EHCI + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + ++config USB_EHCI_OXNAS ++ tristate "OXNAS EHCI Module" ++ depends on USB_EHCI_HCD && ARCH_OXNAS ++ select USB_EHCI_ROOT_HUB_TT ++ ---help--- ++ Enable support for the OX820 SOC's on-chip EHCI controller. ++ + endif # USB_EHCI_HCD + + config USB_OXU210HP_HCD +Index: linux-3.14.18/drivers/usb/host/Makefile +=================================================================== +--- linux-3.14.18.orig/drivers/usb/host/Makefile ++++ linux-3.14.18/drivers/usb/host/Makefile +@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/target/linux/oxnas/patches-3.14/900-more-boards.patch b/target/linux/oxnas/patches-3.14/900-more-boards.patch new file mode 100644 index 0000000..04bbfaa --- /dev/null +++ b/target/linux/oxnas/patches-3.14/900-more-boards.patch @@ -0,0 +1,16 @@ +Index: linux-3.14.18/arch/arm/boot/dts/Makefile +=================================================================== +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,7 +233,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + am43x-epos-evm.dtb \ + dra7-evm.dtb + dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb +-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb \ ++ ox820-pogoplug-v3.dtb \ ++ ox820-stg212.dtb \ ++ ox820-kd20.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ |