diff options
Diffstat (limited to 'target/linux/oxnas/patches-3.18')
13 files changed, 68 insertions, 126 deletions
diff --git a/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch index fb7547f..1ce68e8 100644 --- a/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch +++ b/target/linux/oxnas/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/arch/arm/include/asm/glue-cache.h -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/include/asm/glue-cache.h -+++ linux-3.18-rc4/arch/arm/include/asm/glue-cache.h +--- a/arch/arm/include/asm/glue-cache.h ++++ b/arch/arm/include/asm/glue-cache.h @@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) @@ -22,11 +20,9 @@ Index: linux-3.18-rc4/arch/arm/include/asm/glue-cache.h #endif #endif -Index: linux-3.18-rc4/arch/arm/mm/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/mm/Kconfig -+++ linux-3.18-rc4/arch/arm/mm/Kconfig -@@ -843,6 +843,17 @@ config DMA_CACHE_RWFO +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -844,6 +844,17 @@ config DMA_CACHE_RWFO in hardware, other workarounds are needed (e.g. cache maintenance broadcasting in software via FIQ). @@ -44,10 +40,8 @@ Index: linux-3.18-rc4/arch/arm/mm/Kconfig config OUTER_CACHE bool -Index: linux-3.18-rc4/arch/arm/mm/flush.c -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/mm/flush.c -+++ linux-3.18-rc4/arch/arm/mm/flush.c +--- a/arch/arm/mm/flush.c ++++ b/arch/arm/mm/flush.c @@ -314,7 +314,11 @@ void flush_dcache_page(struct page *page mapping = page_mapping(page); diff --git a/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch index c495258..1645c88 100644 --- a/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch +++ b/target/linux/oxnas/patches-3.18/250-add-plxtech-vendor-prefix.patch @@ -1,8 +1,6 @@ -Index: linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt -=================================================================== ---- linux-3.18-rc4.orig/Documentation/devicetree/bindings/vendor-prefixes.txt -+++ linux-3.18-rc4/Documentation/devicetree/bindings/vendor-prefixes.txt -@@ -113,6 +113,7 @@ panasonic Panasonic Corporation +--- a/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -115,6 +115,7 @@ panasonic Panasonic Corporation phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. diff --git a/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch index 17ec83b..5724263 100644 --- a/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch +++ b/target/linux/oxnas/patches-3.18/300-introduce-oxnas-platform.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/arch/arm/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/Kconfig -+++ linux-3.18-rc4/arch/arm/Kconfig +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig @@ -369,6 +369,17 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. @@ -29,10 +27,8 @@ Index: linux-3.18-rc4/arch/arm/Kconfig source "arch/arm/mach-picoxcell/Kconfig" source "arch/arm/mach-pxa/Kconfig" -Index: linux-3.18-rc4/arch/arm/Makefile -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/Makefile -+++ linux-3.18-rc4/arch/arm/Makefile +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile @@ -187,6 +187,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 @@ -41,10 +37,8 @@ Index: linux-3.18-rc4/arch/arm/Makefile machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom -Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile -+++ linux-3.18-rc4/arch/arm/boot/dts/Makefile +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile @@ -352,6 +352,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-maxtor-shared-storage-2.dtb \ @@ -53,10 +47,8 @@ Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ -Index: linux-3.18-rc4/arch/arm/tools/mach-types -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/tools/mach-types -+++ linux-3.18-rc4/arch/arm/tools/mach-types +--- a/arch/arm/tools/mach-types ++++ b/arch/arm/tools/mach-types @@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127 edb9307a MACH_EDB9307A EDB9307A 1128 omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 @@ -65,10 +57,8 @@ Index: linux-3.18-rc4/arch/arm/tools/mach-types micro9m MACH_MICRO9M MICRO9M 1169 bug MACH_BUG BUG 1179 at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202 -Index: linux-3.18-rc4/drivers/clk/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/clk/Makefile -+++ linux-3.18-rc4/drivers/clk/Makefile +--- a/drivers/clk/Makefile ++++ b/drivers/clk/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_COMMON_CLK_MAX77802) += clk obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o diff --git a/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch index 0959e53..e10b38c 100644 --- a/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch +++ b/target/linux/oxnas/patches-3.18/310-oxnas-clocksource.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/clocksource/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/clocksource/Kconfig -+++ linux-3.18-rc4/drivers/clocksource/Kconfig +--- a/drivers/clocksource/Kconfig ++++ b/drivers/clocksource/Kconfig @@ -156,6 +156,12 @@ config VF_PIT_TIMER help Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. @@ -15,10 +13,8 @@ Index: linux-3.18-rc4/drivers/clocksource/Kconfig config SYS_SUPPORTS_SH_CMT bool -Index: linux-3.18-rc4/drivers/clocksource/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/clocksource/Makefile -+++ linux-3.18-rc4/drivers/clocksource/Makefile +--- a/drivers/clocksource/Makefile ++++ b/drivers/clocksource/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32 obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o diff --git a/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch index e6262da..5e130be 100644 --- a/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch +++ b/target/linux/oxnas/patches-3.18/320-oxnas-irqchip.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/irqchip/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/irqchip/Kconfig -+++ linux-3.18-rc4/drivers/irqchip/Kconfig +--- a/drivers/irqchip/Kconfig ++++ b/drivers/irqchip/Kconfig @@ -15,6 +15,11 @@ config ARM_GIC_V3 select IRQ_DOMAIN select MULTI_IRQ_HANDLER @@ -14,10 +12,8 @@ Index: linux-3.18-rc4/drivers/irqchip/Kconfig config ARM_NVIC bool select IRQ_DOMAIN -Index: linux-3.18-rc4/drivers/irqchip/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/irqchip/Makefile -+++ linux-3.18-rc4/drivers/irqchip/Makefile +--- a/drivers/irqchip/Makefile ++++ b/drivers/irqchip/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc. obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o @@ -26,10 +22,8 @@ Index: linux-3.18-rc4/drivers/irqchip/Makefile obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o -Index: linux-3.18-rc4/drivers/irqchip/irq-gic.c -=================================================================== ---- linux-3.18-rc4.orig/drivers/irqchip/irq-gic.c -+++ linux-3.18-rc4/drivers/irqchip/irq-gic.c +--- a/drivers/irqchip/irq-gic.c ++++ b/drivers/irqchip/irq-gic.c @@ -1044,6 +1044,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400", IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); diff --git a/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch index 3ecc6eb..1bca799 100644 --- a/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch +++ b/target/linux/oxnas/patches-3.18/330-oxnas-pinctrl.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/pinctrl/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/pinctrl/Kconfig -+++ linux-3.18-rc4/drivers/pinctrl/Kconfig +--- a/drivers/pinctrl/Kconfig ++++ b/drivers/pinctrl/Kconfig @@ -67,6 +67,15 @@ config PINCTRL_AT91 help Say Y here to enable the at91 pinctrl driver @@ -18,10 +16,8 @@ Index: linux-3.18-rc4/drivers/pinctrl/Kconfig config PINCTRL_BAYTRAIL bool "Intel Baytrail GPIO pin control" depends on GPIOLIB && ACPI && X86 -Index: linux-3.18-rc4/drivers/pinctrl/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/pinctrl/Makefile -+++ linux-3.18-rc4/drivers/pinctrl/Makefile +--- a/drivers/pinctrl/Makefile ++++ b/drivers/pinctrl/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o diff --git a/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch index 6549db0..b54f00e 100644 --- a/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch +++ b/target/linux/oxnas/patches-3.18/340-oxnas-pcie.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/pci/host/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/pci/host/Kconfig -+++ linux-3.18-rc4/drivers/pci/host/Kconfig +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig @@ -91,4 +91,9 @@ config PCI_XGENE There are 5 internal PCIe ports available. Each port is GEN3 capable and have varied lanes from x1 to x8. @@ -12,10 +10,8 @@ Index: linux-3.18-rc4/drivers/pci/host/Kconfig + select PCIEPORTBUS + endmenu -Index: linux-3.18-rc4/drivers/pci/host/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/pci/host/Makefile -+++ linux-3.18-rc4/drivers/pci/host/Makefile +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o diff --git a/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch index 5540920..c294237 100644 --- a/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch +++ b/target/linux/oxnas/patches-3.18/350-oxnas-reset.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/reset/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/reset/Kconfig -+++ linux-3.18-rc4/drivers/reset/Kconfig +--- a/drivers/reset/Kconfig ++++ b/drivers/reset/Kconfig @@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER If unsure, say no. @@ -12,10 +10,8 @@ Index: linux-3.18-rc4/drivers/reset/Kconfig + source "drivers/reset/sti/Kconfig" + -Index: linux-3.18-rc4/drivers/reset/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/reset/Makefile -+++ linux-3.18-rc4/drivers/reset/Makefile +--- a/drivers/reset/Makefile ++++ b/drivers/reset/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_RESET_CONTROLLER) += core.o +obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o diff --git a/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch index 90827e5..779e74b 100644 --- a/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch +++ b/target/linux/oxnas/patches-3.18/400-oxnas-nand.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/mtd/nand/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/mtd/nand/Kconfig -+++ linux-3.18-rc4/drivers/mtd/nand/Kconfig +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig @@ -516,4 +516,12 @@ config MTD_NAND_XWAY Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached to the External Bus Unit (EBU). @@ -15,10 +13,8 @@ Index: linux-3.18-rc4/drivers/mtd/nand/Kconfig + to the STATIC Unit. + endif # MTD_NAND -Index: linux-3.18-rc4/drivers/mtd/nand/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/mtd/nand/Makefile -+++ linux-3.18-rc4/drivers/mtd/nand/Makefile +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile @@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o diff --git a/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch index 94b792b..af5e66f 100644 --- a/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch +++ b/target/linux/oxnas/patches-3.18/500-oxnas-sata.patch @@ -1,8 +1,6 @@ -Index: linux-3.18-rc4/drivers/ata/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/ata/Kconfig -+++ linux-3.18-rc4/drivers/ata/Kconfig -@@ -385,6 +385,13 @@ config SATA_VITESSE +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -401,6 +401,13 @@ config SATA_VITESSE If unsure, say N. @@ -16,10 +14,8 @@ Index: linux-3.18-rc4/drivers/ata/Kconfig comment "PATA SFF controllers with BMDMA" config PATA_ALI -Index: linux-3.18-rc4/drivers/ata/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/ata/Makefile -+++ linux-3.18-rc4/drivers/ata/Makefile +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o obj-$(CONFIG_SATA_ULI) += sata_uli.o obj-$(CONFIG_SATA_VIA) += sata_via.o diff --git a/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch index f2221dd..b9be0c6 100644 --- a/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch +++ b/target/linux/oxnas/patches-3.18/800-oxnas-ehci.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/drivers/usb/host/Kconfig -=================================================================== ---- linux-3.18-rc4.orig/drivers/usb/host/Kconfig -+++ linux-3.18-rc4/drivers/usb/host/Kconfig +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig @@ -302,6 +302,13 @@ config USB_OCTEON_EHCI USB 2.0 device support. All CN6XXX based chips with USB are supported. @@ -16,10 +14,8 @@ Index: linux-3.18-rc4/drivers/usb/host/Kconfig endif # USB_EHCI_HCD config USB_OXU210HP_HCD -Index: linux-3.18-rc4/drivers/usb/host/Makefile -=================================================================== ---- linux-3.18-rc4.orig/drivers/usb/host/Makefile -+++ linux-3.18-rc4/drivers/usb/host/Makefile +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o diff --git a/target/linux/oxnas/patches-3.18/900-more-boards.patch b/target/linux/oxnas/patches-3.18/900-more-boards.patch index b31967a..fab6936 100644 --- a/target/linux/oxnas/patches-3.18/900-more-boards.patch +++ b/target/linux/oxnas/patches-3.18/900-more-boards.patch @@ -1,7 +1,5 @@ -Index: linux-3.18-rc4/arch/arm/boot/dts/Makefile -=================================================================== ---- linux-3.18-rc4.orig/arch/arm/boot/dts/Makefile -+++ linux-3.18-rc4/arch/arm/boot/dts/Makefile +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile @@ -352,7 +352,10 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-la orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-maxtor-shared-storage-2.dtb \ diff --git a/target/linux/oxnas/patches-3.18/999-libata-hacks.patch b/target/linux/oxnas/patches-3.18/999-libata-hacks.patch index a1c80d8..741dddf 100644 --- a/target/linux/oxnas/patches-3.18/999-libata-hacks.patch +++ b/target/linux/oxnas/patches-3.18/999-libata-hacks.patch @@ -1,8 +1,6 @@ -Index: linux-3.18-rc7/drivers/ata/libata-core.c -=================================================================== ---- linux-3.18-rc7.orig/drivers/ata/libata-core.c -+++ linux-3.18-rc7/drivers/ata/libata-core.c -@@ -1568,6 +1568,14 @@ unsigned ata_exec_internal_sg(struct ata +--- a/drivers/ata/libata-core.c ++++ b/drivers/ata/libata-core.c +@@ -1581,6 +1581,14 @@ unsigned ata_exec_internal_sg(struct ata return AC_ERR_SYSTEM; } @@ -17,7 +15,7 @@ Index: linux-3.18-rc7/drivers/ata/libata-core.c /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some -@@ -4739,6 +4747,9 @@ static struct ata_queued_cmd *ata_qc_new +@@ -4752,6 +4760,9 @@ static struct ata_queued_cmd *ata_qc_new if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; @@ -25,9 +23,9 @@ Index: linux-3.18-rc7/drivers/ata/libata-core.c + return NULL; + for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) { - tag = tag < max_queue ? tag : 0; - -@@ -4805,6 +4816,8 @@ void ata_qc_free(struct ata_queued_cmd * + if (ap->flags & ATA_FLAG_LOWTAG) + tag = i; +@@ -4824,6 +4835,8 @@ void ata_qc_free(struct ata_queued_cmd * if (likely(ata_tag_valid(tag))) { qc->tag = ATA_TAG_POISON; clear_bit(tag, &ap->qc_allocated); @@ -36,11 +34,9 @@ Index: linux-3.18-rc7/drivers/ata/libata-core.c } } -Index: linux-3.18-rc7/include/linux/libata.h -=================================================================== ---- linux-3.18-rc7.orig/include/linux/libata.h -+++ linux-3.18-rc7/include/linux/libata.h -@@ -884,6 +884,8 @@ struct ata_port_operations { +--- a/include/linux/libata.h ++++ b/include/linux/libata.h +@@ -891,6 +891,8 @@ struct ata_port_operations { void (*qc_prep)(struct ata_queued_cmd *qc); unsigned int (*qc_issue)(struct ata_queued_cmd *qc); bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); @@ -49,7 +45,7 @@ Index: linux-3.18-rc7/include/linux/libata.h /* * Configuration and exception handling -@@ -974,6 +976,9 @@ struct ata_port_operations { +@@ -981,6 +983,9 @@ struct ata_port_operations { void (*phy_reset)(struct ata_port *ap); void (*eng_timeout)(struct ata_port *ap); |