diff options
Diffstat (limited to 'target/linux/ppc40x/patches/006-magicboxv2.patch')
| -rw-r--r-- | target/linux/ppc40x/patches/006-magicboxv2.patch | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/target/linux/ppc40x/patches/006-magicboxv2.patch b/target/linux/ppc40x/patches/006-magicboxv2.patch new file mode 100644 index 0000000..47ddd11 --- /dev/null +++ b/target/linux/ppc40x/patches/006-magicboxv2.patch @@ -0,0 +1,351 @@ +diff -Nur a/arch/powerpc/boot/cuboot-magicboxv2.c b/arch/powerpc/boot/cuboot-magicboxv2.c +--- a/arch/powerpc/boot/cuboot-magicboxv2.c 1970-01-01 01:00:00.000000000 +0100 ++++ b/arch/powerpc/boot/cuboot-magicboxv2.c 2008-11-26 09:29:02.000000000 +0100 +@@ -0,0 +1,40 @@ ++/* ++ * Old U-boot compatibility for Magicbox v2 ++ * ++ * Author: Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ops.h" ++#include "io.h" ++#include "dcr.h" ++#include "stdio.h" ++#include "4xx.h" ++#include "44x.h" ++#include "cuboot.h" ++ ++#define TARGET_4xx ++#define TARGET_405EP ++#include "ppcboot.h" ++ ++static bd_t bd; ++ ++static void magicboxv2_fixups(void) ++{ ++ ibm405ep_fixup_clocks(25000000); ++ ibm4xx_sdram_fixup_memsize(); ++ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); ++} ++ ++void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ++ unsigned long r6, unsigned long r7) ++{ ++ CUBOOT_INIT(); ++ platform_ops.fixups = magicboxv2_fixups; ++ platform_ops.exit = ibm40x_dbcr_reset; ++ fdt_init(_dtb_start); ++ serial_console_init(); ++} +diff -Nur a/arch/powerpc/boot/dts/magicboxv2.dts b/arch/powerpc/boot/dts/magicboxv2.dts +--- a/arch/powerpc/boot/dts/magicboxv2.dts 1970-01-01 01:00:00.000000000 +0100 ++++ b/arch/powerpc/boot/dts/magicboxv2.dts 2008-11-26 09:28:10.000000000 +0100 +@@ -0,0 +1,250 @@ ++/* ++ * Device Tree Source for Magicbox v2 ++ * ++ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Based on walnut.dts ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without ++ * any warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "magicboxv2"; ++ compatible = "magicboxv2"; ++ dcr-parent = <&{/cpus/cpu@0}>; ++ ++ aliases { ++ ethernet0 = &EMAC0; ++ ethernet1 = &EMAC1; ++ serial0 = &UART0; ++ serial1 = &UART1; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu@0 { ++ device_type = "cpu"; ++ model = "PowerPC,405EP"; ++ reg = <0x00000000>; ++ clock-frequency = <0xbebc200>; /* Filled in by zImage */ ++ timebase-frequency = <0>; /* Filled in by zImage */ ++ i-cache-line-size = <20>; ++ d-cache-line-size = <20>; ++ i-cache-size = <4000>; ++ d-cache-size = <4000>; ++ dcr-controller; ++ dcr-access-method = "native"; ++ }; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ ++ }; ++ ++ UIC0: interrupt-controller { ++ compatible = "ibm,uic"; ++ interrupt-controller; ++ cell-index = <0>; ++ dcr-reg = <0x0c0 0x009>; ++ #address-cells = <0>; ++ #size-cells = <0>; ++ #interrupt-cells = <2>; ++ }; ++ ++ plb { ++ compatible = "ibm,plb3"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ clock-frequency = <0>; /* Filled in by zImage */ ++ ++ SDRAM0: memory-controller { ++ compatible = "ibm,sdram-405ep"; ++ dcr-reg = <0x010 0x002>; ++ }; ++ ++ MAL: mcmal { ++ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; ++ dcr-reg = <0x180 0x062>; ++ num-tx-chans = <4>; ++ num-rx-chans = <2>; ++ interrupt-parent = <&UIC0>; ++ interrupts = < ++ 0xb 0x4 /* TXEOB */ ++ 0xc 0x4 /* RXEOB */ ++ 0xa 0x4 /* SERR */ ++ 0xd 0x4 /* TXDE */ ++ 0xe 0x4 /* RXDE */>; ++ }; ++ ++ POB0: opb { ++ compatible = "ibm,opb-405ep", "ibm,opb"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0xef600000 0xef600000 0x00a00000>; ++ dcr-reg = <0x0a0 0x005>; ++ clock-frequency = <0>; /* Filled in by zImage */ ++ ++ UART0: serial@ef600300 { ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <0xef600300 0x00000008>; ++ virtual-reg = <0xef600300>; ++ clock-frequency = <0>; /* Filled in by zImage */ ++ current-speed = <115200>; ++ interrupt-parent = <&UIC0>; ++ interrupts = <0x0 0x4>; ++ }; ++ ++ UART1: serial@ef600400 { ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <0xef600400 0x00000008>; ++ virtual-reg = <0xef600400>; ++ clock-frequency = <0>; /* Filled in by zImage */ ++ current-speed = <115200>; ++ interrupt-parent = <&UIC0>; ++ interrupts = <0x1 0x4>; ++ }; ++ ++ IIC: i2c@ef600500 { ++ compatible = "ibm,iic-405ep", "ibm,iic"; ++ reg = <0xef600500 0x00000011>; ++ interrupt-parent = <&UIC0>; ++ interrupts = <0x2 0x4>; ++ }; ++ ++ GPIO: gpio@ef600700 { ++ compatible = "ibm,gpio-405ep"; ++ reg = <0xef600700 0x00000020>; ++ }; ++ ++ EMAC0: ethernet@ef600800 { ++ linux,network-index = <0x0>; ++ device_type = "network"; ++ compatible = "ibm,emac-405ep", "ibm,emac"; ++ interrupt-parent = <&UIC0>; ++ interrupts = < ++ 0xf 0x4 /* Ethernet */ ++ 0x9 0x4 /* Ethernet Wake Up */>; ++ local-mac-address = [000000000000]; /* Filled in by zImage */ ++ reg = <0xef600800 0x00000070>; ++ mal-device = <&MAL>; ++ mal-tx-channel = <0>; ++ mal-rx-channel = <0>; ++ cell-index = <0>; ++ max-frame-size = <0x5dc>; ++ rx-fifo-size = <0x1000>; ++ tx-fifo-size = <0x800>; ++ phy-mode = "mii"; ++ phy-map = <0x00000000>; ++ }; ++ EMAC1: ethernet@ef600900 { ++ linux,network-index = <0x1>; ++ device_type = "network"; ++ compatible = "ibm,emac-405ep", "ibm,emac"; ++ interrupt-parent = <&UIC0>; ++ interrupts = < ++ 0x11 0x4 /* Ethernet */ ++ 0x09 0x4 /* Ethernet Wake Up */>; ++ local-mac-address = [000000000000]; /* Filled in by zImage */ ++ reg = <0xef600900 0x00000070>; ++ mal-device = <&MAL>; ++ mal-tx-channel = <2>; ++ mal-rx-channel = <1>; ++ cell-index = <1>; ++ max-frame-size = <0x5dc>; ++ rx-fifo-size = <0x1000>; ++ tx-fifo-size = <0x800>; ++ mdio-device = <&EMAC0>; ++ phy-mode = "mii"; ++ phy-map = <0x00000001>; ++ }; ++ ++ }; ++ ++ EBC0: ebc { ++ compatible = "ibm,ebc-405ep", "ibm,ebc"; ++ dcr-reg = <0x012 0x002>; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ /* The ranges property is supplied by the bootwrapper ++ * and is based on the firmware's configuration of the ++ * EBC bridge ++ */ ++ clock-frequency = <0>; /* Filled in by zImage */ ++ ++ nor_flash@ffc00000 { ++ compatible = "cfi-flash"; ++ bank-width = <2>; ++ reg = <0x00000000 0xffc00000 0x00400000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ partition@0 { ++ label = "linux"; ++ reg = <0x0 0x3c0000>; ++ }; ++ partition@100000 { ++ label = "rootfs"; ++ reg = <0x100000 0x2c0000>; ++ }; ++ partition@3c0000 { ++ label = "u-boot"; ++ reg = <0x3c0000 0x30000>; ++ read-only; ++ }; ++ }; ++ }; ++ ++ PCI0: pci@ec000000 { ++ device_type = "pci"; ++ #interrupt-cells = <1>; ++ #size-cells = <2>; ++ #address-cells = <3>; ++ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; ++ primary; ++ reg = <0xeec00000 0x00000008 /* Config space access */ ++ 0xeed80000 0x00000004 /* IACK */ ++ 0xeed80000 0x00000004 /* Special cycle */ ++ 0xef480000 0x00000040>; /* Internal registers */ ++ ++ /* Outbound ranges, one memory and one IO, ++ * later cannot be changed. Chip supports a second ++ * IO range but we don't use it for now ++ */ ++ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 ++ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; ++ ++ /* Inbound 2GB range starting at 0 */ ++ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; ++ ++ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; ++ interrupt-map = < ++ /* IDSEL 1 */ ++ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 ++ ++ /* IDSEL 2 */ ++ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 ++ ++ /* IDSEL 3 */ ++ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 ++ ++ /* IDSEL 4 */ ++ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 ++ >; ++ }; ++ }; ++ ++ chosen { ++ linux,stdout-path = "/plb/opb/serial@ef600300"; ++ }; ++}; +diff -Nur a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile +--- a/arch/powerpc/boot/Makefile 2008-11-26 09:15:15.000000000 +0100 ++++ b/arch/powerpc/boot/Makefile 2008-11-26 09:17:01.000000000 +0100 +@@ -69,7 +69,7 @@ + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ + cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ + virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ +- cuboot-acadia.c cuboot-magicboxv1.c ++ cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c + src-boot := $(src-wlib) $(src-plat) empty.c + + src-boot := $(addprefix $(obj)/, $(src-boot)) +@@ -214,6 +214,7 @@ + image-$(CONFIG_WALNUT) += treeImage.walnut + image-$(CONFIG_ACADIA) += cuImage.acadia + image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 ++image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2 + + # Board ports in arch/powerpc/platform/44x/Kconfig + image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +diff -Nur a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig +--- a/arch/powerpc/platforms/40x/Kconfig 2008-11-26 09:15:15.000000000 +0100 ++++ b/arch/powerpc/platforms/40x/Kconfig 2008-11-26 09:16:08.000000000 +0100 +@@ -51,6 +51,16 @@ + help + This option enables support for the Magicbox v1 board. + ++config MAGICBOXV2 ++ bool "Magicbox v2" ++ depends on 40x ++ default n ++ select PPC40x_SIMPLE ++ select 405EP ++ select PCI ++ help ++ This option enables support for the Magicbox v2 board. ++ + config MAKALU + bool "Makalu" + depends on 40x +diff -Nur a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c +--- a/arch/powerpc/platforms/40x/ppc40x_simple.c 2008-11-26 09:15:15.000000000 +0100 ++++ b/arch/powerpc/platforms/40x/ppc40x_simple.c 2008-11-26 09:15:46.000000000 +0100 +@@ -52,7 +52,8 @@ + */ + static char *board[] __initdata = { + "amcc,acadia", +- "magicboxv1" ++ "magicboxv1", ++ "magicboxv2", + }; + + static int __init ppc40x_probe(void) |