diff options
Diffstat (limited to 'target/linux/ramips/base-files')
5 files changed, 17 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index edb8376..652787b 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,6 +66,9 @@ get_status_led() { whr-g300n) status_led="whr-g300n:green:router" ;; + wli-tx4-ag300n) + status_led="buffalo:blue:power" + ;; wl-351) status_led="wl-351:amber:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index a1d4887..55c577e 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -60,6 +60,7 @@ case "$FIRMWARE" in wcr-150gn | \ whr-g300n | \ wl-351 | \ + wli-tx4-ag300n | \ wr512-3gn) rt2x00_eeprom_extract "factory" 0 272 ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 60dd716..834a2a7 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -30,6 +30,10 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t" ;; + wli-tx4-ag300n) + ucidef_set_interface_lan "eth0" + ;; + rt-n15) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rtl8366s" "1" "1" @@ -81,6 +85,11 @@ ramips_setup_macs() lan_mac=$(ramips_get_mac_binary factory 4) wan_mac=$(ramips_get_mac_binary factory 40) ;; + + wli-tx4-ag300n) + lan_mac=$(ramips_get_mac_binary factory 4) + ;; + esac [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4dc10ae..d197fce 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -107,6 +107,9 @@ ramips_board_name() { *"Sitecom WL-351 v1 002") name="wl-351" ;; + *"WLI-TX4-AG300N") + name="wli-tx4-ag300n" + ;; *"WZR-AGL300NH") name="wzr-agl300nh" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 03a1e7b..aebaf38 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -27,6 +27,7 @@ platform_check_image() { rt-g32-b1 | \ rt-n15 | \ v22rw-2x2 | \ + wli-tx4-ag300n | \ whr-g300n) [ "$magic" != "2705" ] && { echo "Invalid image type." |